[ROM][10.0.0][Hotdog] Android Ice Cold Project 15.0 [Official weeklies] - OnePlus 7T Pro (Regular & McLaren) ROMs & Dev.

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://mirror.codebucket.de/claymore1297/AICP/15.0/hotdog
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps: Included for now
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
$ adb reboot bootloader
$ fastboot -w (this will wipe your data)
$ fastboot reboot fastboot
$ fastboot update aicp_hotdog_q-15.0-EXPERIMENTAL-*-gms.zip
The procedure may vary from device to device and is a bit different on system updates!
How to flash updates:
(Again: Don't do it if you don't know!)
Use the built-in updater using local zip file.
After you flashed aicp_hotdog_q-15.0-UNOFFICIAL-20200924.zip (or never) you should be able to receive OTA's with the updater like a official build
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_oneplus_sm8150
Device tree source:
https://github.com/AICP/device_oneplus_hotdog
Vendor source:
https://github.com/Claymore1297/proprietary_vendor_oneplus
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
You want to see a "normal" night at the "DEV office", click here!!​
XDA:DevDB Information
[ROM][10.0.0][Hotdog] Android Ice Cold Project 15.0 [Official weeklies], ROM for the OnePlus 7T Pro
Contributors
Miccia, Claymore1297
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Created 2020-08-04
Last Updated 2020-10-20

How to flash for the first time:
$ adb reboot bootloader
$ fastboot -w (this will wipe your data)
$ fastboot reboot fastboot
$ fastboot update aicp_hotdog_q-15.0-EXPERIMENTAL-*-gms.zip
How to flash updates:
Use the built-in updater using local zip file.
Recovery.img, can be used to flash the first zip or sideload futures updates:
https://drive.google.com/file/d/1CKspR4Dj0X_Eenn8Rj159LPkro1bKw_-/view?usp=sharing

thanks for releasing this beautifull rom for our device! I hope it will become official soon

mate rom is great but there are few things that need to be fixed:
1. qs tile icons are not aligned correctly, they are more positioned on the center, not wide like on stock
2. no 90hz option
3. statusbar header is like brick. need to be transparent like on stock
other than this rom is great keep up the good work!

darkoj2007 said:
mate rom is great but there are few things that need to be fixed:
1. qs tile icons are not aligned correctly, they are more positioned on the center, not wide like on stock
2. no 90hz option
3. statusbar header is like brick. need to be transparent like on stock
other than this rom is great keep up the good work!
Click to expand...
Click to collapse
1) on stock you have 4 tiles by row, here aosp like (3)
2) hz switch isnt properly working
3) again we follow aosp design

#### New build is up!! ####
the build is containing mainly the following:
-september ASB's
-upstreamed kernel
-minor fixes
... and we have something special for you...
after you flashed this build (aicp_hotdog_q-15.0-UNOFFICIAL-20200924.zip), you will receive updates with the builtin updater like an official build
New location for builds is:
https://mirror.codebucket.de/claymore1297/AICP/15.0/hotdog
Enjoy!

#### New build is up!! ####
the build is containing mainly the following:
- kernel upstreamed to latest CAF tag
- System Info options in QS header (AE->Quick Settings)
- Sound Tuner option in Additional device Settings
We are preparing for officials for this device, so please check it out and report.
You can install this with the Updater-app or just sideload it in recovery - GAPPS are included
Enjoy!

Claymore1297 said:
#### New build is up!! ####
the build is containing mainly the following:
- kernel upstreamed to latest CAF tag
- System Info options in QS header (AE->Quick Settings)
- Sound Tuner option in Additional device Settings
We are preparing for officials for this device, so please check it out and report.
You can install this with the Updater-app or just sideload it in recovery - GAPPS are included
Enjoy!
Click to expand...
Click to collapse
thanks for the update mate. btw when you pull down stats bar and qs togles are present, they are not aligned properly, look very narrow. I know it`s something minor for someone but please if you can take a look for the next build. good job though

darkoj2007 said:
thanks for the update mate. btw when you pull down stats bar and qs togles are present, they are not aligned properly, look very narrow. I know it`s something minor for someone but please if you can take a look for the next build. good job though
Click to expand...
Click to collapse
can't see this - can you post a pic here?

Claymore1297 said:
can't see this - can you post a pic here?
Click to expand...
Click to collapse
I am not on aicp right now. but please see how far are wifi, bt, do not disturb etc. tiles when status bar is pulled down, they are very narrow, there should be more space between them to be aligned properly. space should be like this

#### New build is up!! ####
the build is containing mainly the following:
- minor cleanups
- build from consolidated offical AICP repos
We are preparing for officials for this device, so please check it out and report.
Since this build, we don't ship GAPPS included any more (like on a official build).
So please flash as followed:
1. reboot to recovery
2. sideload ROM
3. reboot to recovery
4. sideload gapps
5. reboot
Enjoy!

Claymore1297 said:
#### New build is up!! ####
the build is containing mainly the following:
- minor cleanups
- build from consolidated offical AICP repos
We are preparing for officials for this device, so please check it out and report.
Since this build, we don't ship GAPPS included any more (like on a official build).
So please flash as followed:
1. reboot to recovery
2. sideload ROM
3. reboot to recovery
4. sideload gapps
5. reboot
Enjoy!
Click to expand...
Click to collapse
thanks

Claymore1297 said:
#### New build is up!! ####
the build is containing mainly the following:
- minor cleanups
- build from consolidated offical AICP repos
We are preparing for officials for this device, so please check it out and report.
Since this build, we don't ship GAPPS included any more (like on a official build).
So please flash as followed:
1. reboot to recovery
2. sideload ROM
3. reboot to recovery
4. sideload gapps
5. reboot
Enjoy!
Click to expand...
Click to collapse
re-uploaded the build - with brand-new kernel 4.19.200
lease let me know, if it is working.
Enjoy!

Claymore1297 said:
re-uploaded the build - with brand-new kernel 4.19.200
lease let me know, if it is working.
Enjoy!
Click to expand...
Click to collapse
on previous build can` t mount storage, doesn`t show while phone is plugged to pc. usb debugging worked btw. mate please fix space between qs tiles like on screenshot posted in previous posts. this way looks weird. thanks for yourhard work. hope to get official builds soon

darkoj2007 said:
on previous build can` t mount storage, doesn`t show while phone is plugged to pc. usb debugging worked btw. mate please fix space between qs tiles like on screenshot posted in previous posts. this way looks weird. thanks for yourhard work. hope to get official builds soon
Click to expand...
Click to collapse
The tiles use independent calculations. That is why the space care a bit mixed. And that would be a Rom wide change.
Usb access problem can be confirmed. We are looking into it. :good:
Sent from my OnePlus7Pro using XDA Labs

darkoj2007 said:
on previous build can` t mount storage, doesn`t show while phone is plugged to pc. usb debugging worked btw. mate please fix space between qs tiles like on screenshot posted in previous posts. this way looks weird. thanks for yourhard work. hope to get official builds soon
Click to expand...
Click to collapse
storage mount issue was a kernel issue ans has been fixed!

Claymore1297 said:
storage mount issue was a kernel issue ans has been fixed!
Click to expand...
Click to collapse
just flash another kernel?

darkoj2007 said:
just flash another kernel?
Click to expand...
Click to collapse
no, wait for the next build

Good new everyone!
We have official state and the first WEEKLY build has been build tonight.
You can find the builds here:
https://dwnld.aicp-rom.com/
Enjoy!

Claymore1297 said:
Good new everyone!
We have official state and the first WEEKLY build has been build tonight.
You can find the builds here:
https://dwnld.aicp-rom.com/
Enjoy!
Click to expand...
Click to collapse
file transfer fixed?

Related

[ROM][10.0.0][Himawl] Android Ice Cold Project 15.0 [Unofficial]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and we was based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
For Android 10 we are now full AOSP-based.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
Community
...
@LorD ClockaN
@zipsnet
@eyosen
@semdoc
@SpiritCroc
@wartomato
@eboye
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build nightlies/weeklies and everything that comes with it, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Download-Links:
ROM: https://mirror.codebucket.de/claymore1297/AICP/15.0/hima
TWRP (SAR): https://github.com/CaptainThrowback/android_device_htc_hima/releases/tag/3.3.1-0_CPTB-20200116-02
GAPPS: https://sourceforge.net/projects/opengapps/files/arm64/beta/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
What's working
-wifi
-mobile data
-camera
-bluetooth
-NFC
-audio
-DT2W
-AICP Themes
-GPS
-mobile data signal strength
What's not working
- encryption
-DT2S
FAQ:
Before using the ROM:
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Xposed is not yet released for Pie, however you can try to use edxposed .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, however make a nandroid backup first as there is a chance of getting a bootloop or encountering bugs. Also bugs may only be reported on a clean flash.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Pie. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work).
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk canary
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_htc_msm8994
Device tree source:
https://github.com/AICP/device_htc_hima
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds[/B]
Contributors:
@Claymore1297
@k4y0z
@eyosen
The following information is ONLY needed if you are not opening up a devdb thread on XDA!
ROM OS Version: 10.0 Android 10
Kernel: Linux 3.10.108
Requirements
HTC Firmware: 4.x
TWRP: 3.3.1
Version Information:
Status: BETA
Release Date: 14-09-2019
You want to see a "normal" night at the "DEV office", click here!!​
XDA:DevDB Information
AICP 15.0, ROM for the HTC One (M9)
Contributors
Claymore1297, eyosen, k4y0z
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
ROM Firmware Required: 4.x
Based On: AOSP
Version Information
Status: Beta
Created 2019-09-14
Last Updated 2019-09-14
XDA:DevDB Information
AICP 15.0, ROM for the Verizon HTC One (M9)
Contributors
Claymore1297, eyosen, k4y0z
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x
ROM Firmware Required: 4.x
Based On: AOSP
Version Information
Status: Beta
Created 2019-09-14
Last Updated 2020-01-16
We are introducing in Android 10 a vendor partitionon hima. So please follow the OP and install the linked TWRP, til @Captain_Throwback will release a official version.
So hima is not treble, but has a smell of treble
Also please note, that android Q introduces System-As-Root (SAR), so flashing GAPPS will only work properly with the linked TWRP.
There is also a GAPPS linked that will work with Q until official GAPPS are released.
Reserved #1
#### New build is up!! ####
the build is containing mainly the following:
-GPS
-Mobile signal strength indication
-minor fixes
Enjoy!
Great booting! Thank you, devs.
#### New build is up!! ####
the build is containing mainly the following:
-video playback issue fixed
-Jelly browser-app included
-minor fixes
Enjoy!
Happy to create a dev ticket or whatever is required but wanted to see if anyone else is seeing a big lag time between unlocking and having the home screen show up? I tried both swipe lock screen and pattern lock and both are doing the same thing.
nogoldformarfa said:
Happy to create a dev ticket or whatever is required but wanted to see if anyone else is seeing a big lag time between unlocking and having the home screen show up? I tried both swipe lock screen and pattern lock and both are doing the same thing.
Click to expand...
Click to collapse
Not here. Maybe a log would be helpful.
awesome, thank you to the dev team! boots fine and seems to run. although i got stuck in a boot loop after flashing magisk v19.3. is there a different way to install magisk or different version to use? or should i use a different method to root?
Xzanthurus Gorthamus said:
awesome, thank you to the dev team! boots fine and seems to run. although i got stuck in a boot loop after flashing magisk v19.3. is there a different way to install magisk or different version to use? or should i use a different method to root?
Click to expand...
Click to collapse
well now i am using a magisk canary build and it seems to be working.
---------- Post added at 08:57 PM ---------- Previous post was at 08:30 PM ----------
the Aicp Extras screens are blank for me
#### New build is up!! ####
the build is containing mainly the following:
-alarm clock issue fixed
-warn-message on boot fixed
-CTS failure fixed
-minor fixes
AICP features added:
-cpuinfo widget
-added various tiles
-improved dialer settings
-batterybar (but colorized feature is missing right now)
-some notification customizations
-extended chargeinfo on lockscreen
-unlock pin scramble
Enjoy!
Joined the XDA forums just to say Thanks! Thank you guys very much for your hard work, I've flashed this rom and finally after dealing with me being lazy about my firmware, have it running. I'm not quite sure if I'm rooted correctly or not however. I do get some options in the Aicp Extras app but nothing under system. I don't have any extra apps after flashing.
But thanks very much and will be happy to report anything that goes wrong I'll be using this daily.
RazzRaccoon said:
Joined the XDA forums just to say Thanks! Thank you guys very much for your hard work, I've flashed this rom and finally after dealing with me being lazy about my firmware, have it running. I'm not quite sure if I'm rooted correctly or not however. I do get some options in the Aicp Extras app but nothing under system. I don't have any extra apps after flashing.
But thanks very much and will be happy to report anything that goes wrong I'll be using this daily.
Click to expand...
Click to collapse
settings-app is more or less pure AOSP - AICP-Extras will be filled in the next months
Just an update for myself using this rom. I have experienced gps issues as I use google maps. I did attempt to navigate with maps and my location stayed static even after several attempts. It does also take a bit for it to lock on if its unable to use wifi to assist it. When i was out walking it would bounce me all over the city block.
So not sure if this is just me or what. But if there is something data wise i can provide i can do so.
Addition: So listening to audio through the headphone jack I am experiencing definit audio issues. Any audio that plays has millisecond drops in audio. It does not matter the app. I feel like its the cpu maxing out. Bluetooth is just fine.
#### New build is up!! ####
the build is containing mainly the following:
-JamesDSP
-minor fixes
AICP features added:
-DT2S
-DT2S on lockscreen
-Screenrecord fixed
Note: you have still to reflash GAPPS and regrant permissions. As soon as this issue is fixed, we will provide unofficial OTA's
Enjoy!
Claymore1297 said:
#### New build is up!! ####
the build is containing mainly the following:
-JamesDSP
-minor fixes
AICP features added:
-DT2S
-DT2S on lockscreen
-Screenrecord fixed
Note: you have still to reflash GAPPS and regrant permissions. As soon as this issue is fixed, we will provide unofficial OTA's
Enjoy!
Click to expand...
Click to collapse
Dirty flash stuck at this screen ,going to roll back to previous rom
Logcat
DaveedDB said:
Dirty flash stuck at this screen ,going to roll back to previous rom
Click to expand...
Click to collapse
I fetch one logcat here.
imknown said:
I fetch one logcat here.
Click to expand...
Click to collapse
uploaded a fixed build. Try this one
Claymore1297 said:
uploaded a fixed build. Try this one
Click to expand...
Click to collapse
Booted, great. :highfive:
#### New build is up!! ####
the build is containing mainly the following:
-JamesDSP Icon fixed
-Camera fixed
-minor fixes
AICP features added:
-Changelog
-addon.d/backuptool support
Note: This means starting with this build you don't need to reflash gapps, magisk etc.
Enjoy!

[ROM][11.0.0][Hotdog] Android Ice Cold Project 16.1 [Official]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://mirror.codebucket.de/claymore1297/AICP/16.1/hotdog
GAPPS: https://mirror.codebucket.de/claymore1297/GAPPS/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps: Included for now
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
Download the latest build and gapps
Boot to recovery
Flash the latest build
Boot to recovery again
Flash gapps
Reboot
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_oneplus_sm8150
Device tree source:
https://github.com/AICP/device_oneplus_hotdog
Vendor source:
https://github.com/Claymore1297/proprietary_vendor_oneplus
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
You want to see a "normal" night at the "DEV office", click here!!​
XDA:DevDB Information
[ROM][11.0.0][Hotdog] Android Ice Cold Project 16.0 [Unofficial], ROM for the OnePlus 7T Pro
Contributors
Claymore1297, Miccia, wartomato
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Beta
Created 2020-10-25
Last Updated 2020-10-25
**reserved**
#### New build is up!! ####
the build is containing mainly the following:
-october ASB's
AICP features:
-System fonts
-themes feature (partially added back) -> this is still very beta so be patiently please
flash instructions:
1. reboot to recovery
2. sideload ROM
3. reboot to recovery
4. sideload gapps
5. reboot
GAPPS can be found here:
https://mirror.codebucket.de/claymore1297/GAPPS/
Enjoy!
Thanks for the Android 11 rom provide.
All good with installation, I will work today to see how perform.
But one question through why rom does not support f2fs file system like many other rom provide like msm xtended android 11 or RR with Android 10?
I'm getting really bad storage performance on ext4 file system.
Here's comparison with f2fs on RR
Left RR right AICP
Also here's some screenshot from rom itself View attachment 5124657View attachment 5124661View attachment 5124663View attachment 5124665View attachment 5124667View attachment 5124669View attachment 5124671
Sent from my HD1913 using Tapatalk
paatha13 said:
Thanks for the Android 11 rom provide.
All good with installation, I will work today to see how perform.
But one question through why rom does not support f2fs file system like many other rom provide like msm xtended android 11 or RR with Android 10?
I'm getting really bad storage performance on ext4 file system.
Here's comparison with f2fs on RR
Left RR right AICP
Also here's some screenshot from rom itself View attachment 5124657View attachment 5124661View attachment 5124663View attachment 5124665View attachment 5124667View attachment 5124669View attachment 5124671
Sent from my HD1913 using Tapatalk
Click to expand...
Click to collapse
will add f2fs support for next build. thanks for the headsup.
Claymore1297 said:
will add f2fs support for next build. thanks for the headsup.
Click to expand...
Click to collapse
Plz make a separate kernel branch for that,
Sent from my OnePlus7Pro using XDA Labs
why rom is frameskipping all the time? no matter which refresh rate I choose all the time is like frame skipping and not smooth at all?
#### New build is up!! ####
the build is containing mainly the following:
-minor fixes
-F2FS support for data-Partition **
AICP features:
-themes feature almost completed
-Slim recents
-Batterybar
-Statusbar Logo
-Lockscreen Icon
-CPU info
-Screen Off animations
-System UI tuner
-System app remover (root only)
-Changelog
-ROMstat feature
** not as default, so you need to format this for F2FS in TWRP f. ex.
Enjoy!
Claymore1297 said:
#### New build is up!! ####
the build is containing mainly the following:
-minor fixes
-F2FS support for data-Partition **
AICP features:
-themes feature almost completed
-Slim recents
-Batterybar
-Statusbar Logo
-Lockscreen Icon
-CPU info
-Screen Off animations
-System UI tuner
-System app remover (root only)
-Changelog
-ROMstat feature
** not as default, so you need to format this for F2FS in TWRP f. ex.
Enjoy!
Click to expand...
Click to collapse
is the rom smooth now? first build was laggy all the time. thanks for your hard work
darkoj2007 said:
is the rom smooth now? first build was laggy all the time. thanks for your hard work
Click to expand...
Click to collapse
can't confirm this. No problem here
Claymore1297 said:
can't confirm this. No problem here
Click to expand...
Click to collapse
just flashed the rom. again rom is very laggy. no matter which refresh rate is chosen rom lags a lot all the time. great features btw and it`s awesome base for future builds. please fix this I love this rom
edit: gapps were the issue! tryed bitgapps and all works fine THANKS!
darkoj2007 said:
just flashed the rom. again rom is very laggy. no matter which refresh rate is chosen rom lags a lot all the time. great features btw and it`s awesome base for future builds. please fix this I love this rom
Click to expand...
Click to collapse
Sorry not here, everything is smooth and snappy....
Ahhh OK. OK then:fingers-crossed:
Claymore1297 said:
Sorry not here, everything is smooth and snappy....
Ahhh OK. OK then:fingers-crossed:
Click to expand...
Click to collapse
what irmware you use as a base and which gapps?
darkoj2007 said:
what irmware you use as a base and which gapps?
Click to expand...
Click to collapse
latest firmware, I think. and usr the NikGapps core like on OP - fits for me
Claymore1297 said:
latest firmware, I think. and usr the NikGapps core like on OP - fits for me
Click to expand...
Click to collapse
really strange! tried to do clean flash twice, same issue. maybe someone can flash the rom and report. btw I use 10.0.11 firmware (global) as a base which is latest but no luck with the rom
darkoj2007 said:
really strange! tried to do clean flash twice, same issue. maybe someone can flash the rom and report. btw I use 10.0.11 firmware (global) as a base which is latest but no luck with the rom
Click to expand...
Click to collapse
Well I use the ROM as DD. So can you exact explain, what you did and what's the issue
Same laggy...
https://1drv.ms/v/s!AmUo1UXzJusBgbYWl-dIBDVBnTlHrgWell sorry for my poor english first. I thought I got the same laggy problem. What I did to flash this ROM is using payload dumper because twrp couldn't decrypted OOS ROM's data.Gapps edition is bitgapps.
Claymore1297 said:
Well I use the ROM as DD. So can you exact explain, what you did and what's the issue
Click to expand...
Click to collapse
extract recovery from payload dumper. clean flash oos on both slots. flash the rom via recovery sideload through adb. reboot to recovery, flash gapps on other slot, format data and reboot to system. I flashed lineage also just to check if everything is ok an maybe it was gapps issue but no. Lineage was smooth as butter but i know that AICP was based on Lineage so maybe something is messed up with screen refresh rates, don`t know...
Does android auto work on this rom?
Hello everyone,
when I flash the ROM, NikGapps and Magisk, SafetyNet says failed. Does anyone know how I can pass SafetyNet?
If I change device fingerprint, I end up in bootloop.

[ROM][UNOFFICIAL] AICP 16.1 [Miatoll][Weekly]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
Maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
If you like my work you can donate me too also.
Latest Stable Release Version 16.1
Download link: https://sourceforge.net/projects/xp...toll_r-16.1-UNOFFICIAL-20201217.zip/download/
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
Bluetooth (That means bluetooth audio too)
WFD untested
You tell me
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Q. Alright, but I still want to flash Xposed, so which version do I need to install?
A. Information about Xposed, EdXposed or Riru Core can be obtained from the XPosed General forums .
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work), GApps are already included for some a/b devices.
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
Kernel SM6250
Device tree source:
android_device_xiaomi_miatoll
Vendor source:
vendor_xiaomi_atoll
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
(mention all the devs who have contributed to your device tree, kernel, vendor, etc,
only mention the main ones though, probably the top four or so, otherwise this list will be a mile long xD)
The following information is ONLY needed if you are not opening up a devdb thread on XDA!
ROM OS Version: 11.0.x
Kernel: Linux 4.14.xx
Version Information:
Status: WEEKLY
Release Date: 12-17-2020
You want to see a "normal" night at the "DEV office", click here!!​
CHANGELOG:
Note: xxx in the date means not released yet
xx/12/2020
Bluetooth Fixed
Brightness issue fixed
Display Flickering fixed
Fixed some performance issues
Fixed ConsumerIR
17-12-2020
Initial release
reserved
Awesome! (#este)
Bluetooth doesnt work in this build?
Thank you very much, I have been waiting for this rom for a long time. I will wait for a more stable build.
Yes me too , I've been waiting for this one.
Will also wait for a more stable release
Thank you
What gapps should i use sir ?
nameless354 said:
Thank you very much, I have been waiting for this rom for a long time. I will wait for a more stable build.
Click to expand...
Click to collapse
ForceFieldG said:
Yes me too , I've been waiting for this one.
Will also wait for a more stable release
Thank you
Click to expand...
Click to collapse
Genkimaru said:
What gapps should i use sir ?
Click to expand...
Click to collapse
In this first release build , bluetooth bug exist, also random glitch with display I fixed the bluetooth but i want to fix the display glitch first to send new release or any want the bt fix first?
I using nickgapps i will try also to push this rom with gapps as prebuilts.
TeamMex said:
In this first release build , bluetooth bug exist, also random glitch with display I fixed the bluetooth but i want to fix the display glitch first to send new release or any want the bt fix first?
I using nickgapps i will try also to push this rom with gapps as prebuilts.
Click to expand...
Click to collapse
Let's wait, personally, I'm not in a hurry)
A big request, if there are assemblies with preinstalled gapps, then let them be minimal, while maintaining regular calls and aosp messages
TeamMex said:
In this first release build , bluetooth bug exist, also random glitch with display I fixed the bluetooth but i want to fix the display glitch first to send new release or any want the bt fix first?
I using nickgapps i will try also to push this rom with gapps as prebuilts.
Click to expand...
Click to collapse
Loved the rom. I'll patiently wait for the brightness issue to be resolved. I think its quite a concern for most people so maybe the BT fixed build wont be used a lot. Thanks a lot for considering AICP. I also hope you add very minimal gapps (personally prefer vanilla build)
TeamMex said:
In this first release build , bluetooth bug exist, also random glitch with display I fixed the bluetooth but i want to fix the display glitch first to send new release or any want the bt fix first?
Click to expand...
Click to collapse
We'll wait.
TeamMex said:
In this first release build , bluetooth bug exist, also random glitch with display I fixed the bluetooth but i want to fix the display glitch first to send new release or any want the bt fix first?
I using nickgapps i will try also to push this rom with gapps as prebuilts.
Click to expand...
Click to collapse
Love your work man, I'll flash your next build but if you decide to make a prebuilt gapps version, can you please either do only core apps or provide a vanilla version as well?
Also waiting for your caf rom as well, such an amazing rom that would be.
Is this still updated?

[ROM][11.1] AICP 16.1 [20/03/2021][UNOFFICE][MIATOLL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
IT HERE (no gapps included)
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
(link the best one for your device, there are several variants out there right now, nano/micro GApps from opengapps.org is almost always a good choice though)
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (OrangeFox or my TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM zip file.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device, enable developer settings and in them, OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices, you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source: https://github.com/SonalSingh18/android_kernel_xiaomi_sm6250
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
Dungphp, Sonal Singh (kernel), Cosmin Tanislav, Erfan Abdi
Information:[
ROM OS Version: 11.x
Kernel: Linux x.z.y (for example: 4.14.y)
ROM {Firmware|Vendor} required:
Status: {ALPHA|BETA|STABLE}
Release Date: mm-dd-yyyy
You want to see a "normal" night at the "DEV office", click here!!​
INFO:
Changelog:
20/03/2021:
• Initial Build
AICP, I need to try, already downloading.
Thank you!
Looking forward to try this one on a daily basis! Will notify for any issue I encounter (hopefully none! )
wow AICP nice
Thank you for your efforts.
I really hope that you open another thread for RROS too, it's really needed.
AbboodSY said:
Thank you for your efforts.
I really hope that you open another thread for RROS too, it's really needed.
Click to expand...
Click to collapse
yes i always ask him to create threads
tusharind007 said:
yes i always ask him to create threads
Click to expand...
Click to collapse
RROS has stopped Android 10 version from 5 February security patch. Now wait for RROS Android 11 !
I tried to install you Evox Rom , I'm m getting error 1 , any help to workaround ?
savinjo22 said:
I tried to install you Evox Rom , I'm m getting error 1 , any help to workaround ?
Click to expand...
Click to collapse
Reboot to recovery, format data, cache then install Evo-x rom
dungphp said:
Reboot to recovery, format data, cache then install Evo-x rom
Click to expand...
Click to collapse
I tried that, but I ' ll try again...tnx for replay .
is this build force encryption ?
dungphp said:
Reboot to recovery, format data, cache then install Evo-x rom
Click to expand...
Click to collapse
tried this but still getting error 1 update_dynamic_partition
savinjo22 said:
I tried that, but I ' ll try again...tnx for replay .
is this build force encryption ?
Click to expand...
Click to collapse
Shiiimakaze said:
tried this but still getting error 1 update_dynamic_partition
Click to expand...
Click to collapse
What is the recovery you used ?
dungphp said:
What is the recovery you used ?
Click to expand...
Click to collapse
ofox
Shiiimakaze said:
ofox
Click to expand...
Click to collapse
I tried PBRP and Ofox , same issue
Shiiimakaze said:
ofox
Click to expand...
Click to collapse
What is your phone ? Test my recovery and remember turn off your phone one time
AICP is prob the 6th or 7th rom ive tried now and def my favorite so far. Havent had any problems with bt, gps, black screen when receiving call, etc. Props to devs and also thanks.
is gps working using this rom? can't get location using maps or waze.., thank you
fajarep said:
is gps working using this rom? can't get location using maps or waze.., thank you
Click to expand...
Click to collapse
I use Flame Basic gapps regularly and don't have GPS error. I just restored AICP backedup and got a good GPS on Google Maps, GPS test (offline)
fajarep said:
is gps working using this rom? can't get location using maps or waze.., thank you
Click to expand...
Click to collapse
I couldnt get waze to work either but mapquest app is working

Development [ROM] [Android 12] [Not Official] [Vanilla] Android Ice Cold Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-S with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning, we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 17.1
Download link: https://android.redbirdvirtual.com/Lemonadep (OnePlus 9 Pro)/AICP/
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal (and others) GApps packages could have issues, so try using MindTheGapps if you have any issues with other GApps packages
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases, these apps include proprietary libs/code and cannot be included in the device trees on GitHub or we risk having the ROM banned from GitHub. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from GitHub, and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is how users can/should install updates most of the time, this can be done with the built-in updater service or with a custom recovery.
Q. How do I 'dirty flash' builds?
A 1. For "A only" devices: Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
A 2. For "A/B" devices": Wipe the ART/Dalvik cache. Flash the ROM, reboot to the recovery, flash GApps, your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android S. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP is recommended, the lineage recovery is a great alternative however, it will not decrypt the internal storage so you will have to flash the rom with adb sideload or usb OTG or with an external sdcard).
3. Wipe the System (DO NOT WIPE THE SYSTEM ON A/B DEVICES!), Cache, and Data (you might need to format the data partition!).
4. Flash the ROM zip file (reboot to recovery before flashing anything else if you have an "A/B" device).
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device.
7. You can then reboot to recovery and flash the root solution of your choice if you want to, and then boot back to the system.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on A/B Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
Instructions for OTA ("Over-The-Air" Updates) on "A only" devices (not A/B):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices, you will have to enter your PIN/password in TWRP before the process starts.
Open the updater app, download the update, then press install, press reboot when prompted, you will be taken to TWRP, there isn't any need to flash GApps separately
Instructions for OTA ("Over-The-Air" Updates) on "A/B" devices:
Open the updater app, download the update, then press install and wait for the process to finish (feel free to let it run in the background), then press reboot when prompted, there isn't any need to flash GApps separately
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
GitHub - Xtended-Devices/kernel_oneplus_sm8350
Contribute to Xtended-Devices/kernel_oneplus_sm8350 development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on GitHub
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
My Telegram Channel
Information:
ROM OS Version: 12.1
Kernel: Linux 5.4.161
ROM {Firmware|Vendor} required:
Status: STABLE
Release Date: 05-28-2022
You want to see a "normal" night at the "DEV office", click here!!​
I came to XDA in 2012 to flash the Nexus with AICP lol. Is like I'm reading a retro post!
benhidalgo said:
I came to XDA in 2012 to flash the Nexus with AICP lol. Is like I'm reading a retro post!
Click to expand...
Click to collapse
LOL!
Red Prez16 said:
LOL!
Click to expand...
Click to collapse
Boots fine,works with Verizon only problem is there's no system space for gapps.gapps will not flash
gillim74 said:
Boots fine,works with Verizon only problem is there's no system space for gapps.gapps will not flash
Click to expand...
Click to collapse
The new version fixes that issue. Don't download the one called .OLD download the one that only has .ZIP
gillim74 said:
Boots fine,works with Verizon only problem is there's no system space for gapps.gapps will not flash
Click to expand...
Click to collapse
https://android.redbirdvirtual.com/Lemonadep%20%28OnePlus%209%20Pro%29/AICP/aicp_lemonadep_s-17.1-UNOFFICIAL-20220528.zip
https://android.redbirdvirtual.com/Lemonadep%20%28OnePlus%209%20Pro%29/AICP/boot.img
Red Prez16 said:
The new version fixes that issue. Don't download the one called .OLD download the one that only has .ZIP
Click to expand...
Click to collapse
Ha you must of added that after I dl it
gillim74 said:
Ha you must of added that after I dl it
Click to expand...
Click to collapse
Yeah, I must've! At least I fixed it!
Red Prez16 said:
Yeah, I must've! At least I fixed it!
Click to expand...
Click to collapse
Works good now
gillim74 said:
Works good now
Click to expand...
Click to collapse
Awesome!
So far ony thing i noticed is that under aicp settings quick settings if you try to turn off edit icon power menu etc from pulldown they are still there.other then that so far very nice
Oh man, I wish I had a Pro! I haven't seen an AICP ROM on so many years!
Few questions!
1. I understand this not official ACIP, however, is official kernel been used in the rom or some other custom kernel (kernel details will be preferable).
2. Is Oneplus setting available.
3. How is the sound quality compare to other rom and also mic working fine, is there any type of echo or even distortion in the sound qulaity.
4. Is wrap charging available.
5. Is AOD working fine, becuase some roms in Oneplus developing section the AOD (Ambient Display) is too dim it's extremely hard to see in daylight condition unless power button is pressed.
break.cold said:
Few questions!
1. I understand this not official ACIP, however, is official kernel been used in the rom or some other custom kernel (kernel details will be preferable).
2. Is Oneplus setting available.
3. How is the sound quality compare to other rom and also mic working fine, is there any type of echo or even distortion in the sound qulaity.
4. Is wrap charging available.
5. Is AOD working fine, becuase some roms in Oneplus developing section the AOD (Ambient Display) is too dim it's extremely hard to see in daylight condition unless power button is pressed.
Click to expand...
Click to collapse
1. The kernel being used here is the same one used in MSMXtended.
2. Yes, OnePlus settings are available
3. I don't think so, but test it out and let me know.
4. Most likely not.
5. AOD is working.
Red Prez16 said:
The new version fixes that issue. Don't download the one called .OLD download the one that only has .ZIP
Click to expand...
Click to collapse
LOL I was the first victim. Let me try the new version now.
Awesome ROM. Super fast and cool. Have not run into overheating in the last couple of hours. I like this kernel on AICP. There are a couple of minor bugs I ran into no big deal. Once they pop up again I will address them.
Questions:
Where is the 60/120hz button?
Can we add reTicker for notifications?
benhidalgo said:
LOL I was the first victim. Let me try the new version now.
Awesome ROM. Super fast and cool. Have not run into overheating in the last couple of hours. I like this kernel on AICP. There are a couple of minor bugs I ran into no big deal. Once they pop up again I will address them.
Questions:
Where is the 60/120hz button?
Can we add reTicker for notifications?
Click to expand...
Click to collapse
I don't know to both of those questions.
Red Prez16 said:
I don't know to both of those questions.
Click to expand...
Click to collapse
The settings to switch 60hz or 120hz, I can't find it.
ReTicker changes the notifications bubble aod to a scrolling line aod.
When pressing power key for me it only opens Google assistant... Anyone else having this problem or is it something I've done wrong?
Shooter7889 said:
When pressing power key for me it only opens Google assistant... Anyone else having this problem or is it something I've done wrong?
Click to expand...
Click to collapse
It's dumb. You have to press the Volume Up button and the Power Button.
benhidalgo said:
The settings to switch 60hz or 120hz, I can't find it.
ReTicker changes the notifications bubble aod to a scrolling line aod.
Click to expand...
Click to collapse
Maybe the setting to change that is not present in this ROM. Maybe ReTicker works? I've never tried it before.

Categories

Resources