Related
Hello,
I bought a HTC One M9 and after 1 year, the device hat a bootloop. When I launched the device, it starts until there was a message "Optimizing Apps" (German: "Apps werden optimiert").
I think, the phone made an update and got an error. (I can't say it, because it's not my one.)
Because of this problems i tried to recover the phone and only got an red triangle. I thought, the phone was broken and sent it to HTC in poland. While the phone was sent in, i found out, that i had to push some Buttons to recover the phone.
Now, HTC said, the phone has a water damage and sent it back to me.
Now I have a phone, which only boots into the bootloader menu. I can't start the recover mode (there comes an error message) and also can't start into the download mode.
The phone also starts only into the bootloader mode (bootloop).
I can communicate to the phone by fastboot (not by adb), but some answers are empty.
For Example:
I enter: fastboot oem get_identifier_token and the answer is empty.
Also the answer for the battery Status is empty. (i can't say it exactly, because i made the tests one week ago, but something like: "accu-capazity: "
I think, because of this answer, the RUU tool stops flashing with the error message, that the accu-capazity is not high enough.
What can I do?
Thanks for any help.
Try sync manager or the original ruu if not rooted.
If rooted try flashing a rom from the sdcard.
The "optimising apps" message is an app you've installed that either doesn't have an odex or you've uninstalled an app and it didn't erase the odex. Rogue apps is the answer to the original problem and you didnt need to mess with the phone.
Beamed in by telepathy.
Hello,
thanks for your Reply. I've forgot this post.
I have an original phone, i didn't root it and also changed something on the System.
I've tried the sync Manager but there's no Option to repair my phone.
I also downloaded a RUU File. It's not verificated for Windows but the Setup seems very trustly.
Do you have other ideas to fix the phone?
According to your last answer, you also think, that this error isn't triggerd by an water damage?
There is no way that message can be caused by water damage.
Beamed in by telepathy.
But is there a way to fix the phone?
I can't get to the download mode, the sd-card method didn't work and the RUU tool says, the accu is to low.
didn't enable developer options on this phone seeing that I was primarily going to use this phone as my daily driver so I carried on using the phone as is. the next day my phone show me an error, it said "Your device is corrupt. It can't be trusted and may not work properly." (Red) and I proceeded to link it showed me to see what the problem might be.
A few minuets after it showed me that error my phone shut down and couldn't turn on. I tried everything to reboot it but to no success, I was able boot it in fastboot mode and downloaded all the appropriate tools to do a flash install of a factory default image,I got the default operating system that the phone came with, as well as adb-tools required to perform a system wide flash seeing as i didn't have that much data on it.
Once everything was set, I followed the step by step instructions that google provided me on the restore to factory setting pages "https://developers.google.com/android/nexus/images". Seeing as I didn't enable developer options when my phone was working, I run into a prerequisite that needed that before I could flash my device.
While running the commands in cmd as an administrator, I run the command -
fastboot flashing unlock command and the console responded with -
FAILED (remote: oem unlock is not allowed)
I went back and reread this step, which was step number 4, It indicated "If necessary, unlock the device's
bootloader by running" the command. so i figured maybe it isn't really necessary, I proceeded to run the flash-all.bat
script, and it FAILED at every step saying -
FAILED (remote: device is locked. Cannot flash) //corresponding .img file//
It failed to flash my nexus 5x at every stage. So I did some research and found out that the problem was
that in the fastboot menu, the Device state was locked in a very assuring green color, and every where I
searched it indicated that this option to unlock the device was in the developer settings in the phones
OS, which is rather odd to put such a feature in the phones OS and fail to include the option in the fastboot menu. I
couldn't find any tool or assistance change the status of the device state to unlocked.
Now my question is, how can I change the device state to unlocked without enabling this options prior in the OS seeing
as i cant do that because my phone isn't coming on at all. any assistance or help would be highly appreciated.
Point of clarification, I have tried everything in accordance to what google nexus support pages have showed
me to the letter.
You can't enable OEM unlock by fastboot/recovery.
But there's another way to rescue your phone.
So
Can you boot into recovery? (Bootloader mode switch to recovery mode using volume keys and press power to choose it)
If it started and you would see an Android with an red triangle press power and hit volume+ to turn on menu. If it works you are safe.
Then download OTA image from Android developers page (OTA, not factory), launch command line (I don't know how it works on Windows, I've never flashed anything on Windows )
And you will need to flash this OTA image by executing adb sideload nameofpackage.zip
Remember to choose adb sideload in recovery first and then executing a command. It should flash and your phone should work.
Good luck!
Wysłane z mojego Nexus 5X przy użyciu Tapatalka
I cant boot in recovery mode... When I tried to boot in recovery stuck in google logo then power off...
Oh that's not good.
Do you have warranty on your phone?
The last thing I keep in mind is flashing using LG tool, but I might take a look on it because I don't know how to use it.
Wysłane z mojego Nexus 5X przy użyciu Tapatalka
No not in warranty....
I contact in LG service center they said chage the motherboard and cost around 170$
That amount so big??
Is there any method to unlock in this case from fastboot?
I need to unlock for custom kernel to flash.
Im on bootloop and oem locked in the system (befor got bootloop)
Help
Domin_PL said:
Oh that's not good.
Do you have warranty on your phone?
The last thing I keep in mind is flashing using LG tool, but I might take a look on it because I don't know how to use it.
Wysłane z mojego Nexus 5X przy użyciu Tapatalka
Click to expand...
Click to collapse
try to >>>Nexus Root Toolkit<<<
Do you your computer can see phone
There where some hidden fastboot commands on XDA. Maybe you can try some of them to see if they can go around this limitation.
Sent from my Nexus 5X using Tapatalk
akins0405 said:
try to >>>Nexus Root Toolkit<<<
Do you your computer can see phone
Click to expand...
Click to collapse
I have the same issue mentioned above. Downloaded Nexus Root Toolkit and i have tried unlock through Nexus Root Toolkit. It seems failure. Because, After detecting my device it reboots and my phone reboots and shows the google logo and reboot again and again... My phone will not boot into recovery mode. While we click on it, it shows google logo and reboots again and again... Is there any solution for this?
OMG!!!
I Have the exact same issue with my bq aquaris x5
I really wish someone would find a solution for this
Seems options are very limited now
Having exact same issue with Huawei Y3. After spending the whole day, came to the conclusion that there is now only two options left: a) Replace the motherboard. b) pay £15 at dc unlock website to unlock oem. Not decided which one should i go for..
I got the same issue.
Nexus 5X has no activated "Allow OEM Unlock".
I tried with the Nexus Root Toolkit.
When I try to unlock Bootloader or the option "Fix Bootloop" he wants me to put the phone into Fastboot.
When I put phone into Fastboot he recognizes it and then restarts the phone. From now on nothing more happens, because noe the bootloop is "active" again.
Recovery Mode is not working, too.
Before I can access it, bootloop starts.
Sound as the same issue as @tomsonmathewv has.
Can someone help me?
EDIT:
While I tried some other solutions my Nexus 5X booted and booted.
And suddenly it booted one time to the Pattern screen. I entered the pattern and waited again for the bootloop after google animation.
But then the google animation finished and a short black screen with s small blue line in the middle of the display appeared. Looked like a "graphics error". But then immediately the normal phone idle screen appeared. The phone started!
I immediately went to the DEV-Options and Allowed OEM-unlock. And I took screenshots of the current configuration.
The current Android is 8.1
Is it recommended to flash an older version of Android to prevent a new Bootloop?
I had the same issue after the latest Android update on my Nexus 5X.
Have you left the device in charge before it manage to start?
Thanks
EDIT: Solved leaving it unplugged.
Hey buddy try Nexus Root Toolkit v2.1.9 it will unlock your bootloader without turning your phone on it worked for me.
aadeekhan79 said:
Hey buddy try Nexus Root Toolkit v2.1.9 it will unlock your bootloader without turning your phone on it worked for me.
Click to expand...
Click to collapse
NRT isn't going to work unless you previously allowed for oem unlock in developer options. If you haven't done that and you can't boot into recovery or the system you're kind of sol.
Sent from my [device_name] using XDA-Developers Legacy app
Shuhan44 said:
Having exact same issue with Huawei Y3. After spending the whole day, came to the conclusion that there is now only two options left: a) Replace the motherboard. b) pay £15 at dc unlock website to unlock oem. Not decided which one should i go for..
Click to expand...
Click to collapse
does that software (dc unlocker) actualy works? i've got the same issue with honor 8 pro, which opt. you have selected.
In my case before my N5X started bootlooping I allowed OEM unlock but didn't enabled USB Debugging Mode in Developer options. Is there a way to unlock bootloader with USB Debugging Mode disabled? I want to try the UNBLOD tool, but unlocked bootloader is a requirement.
xrehpicx said:
OMG!!!
I Have the exact same issue with my bq aquaris x5
I really wish someone would find a solution for this
Click to expand...
Click to collapse
Hi
I also need help of a slightly different nature. I'm somehow locked out of my Huawei P10 whereby my unlock pattern is no longer recognized. USB debugging is not enabled. What are my option as i really do not want to factory reset the phone, did not backup data. Coincidentally enough, this occurred after the latest software update. Please can someone help me.
Thanks
Thanks
Roshan0746 said:
didn't enable developer options on this phone seeing that I was primarily going to use this phone as my daily driver so I carried on using the phone as is. the next day my phone show me an error, it said "Your device is corrupt. It can't be trusted and may not work properly." (Red) and I proceeded to link it showed me to see what the problem might be.
A few minuets after it showed me that error my phone shut down and couldn't turn on. I tried everything to reboot it but to no success, I was able boot it in fastboot mode and downloaded all the appropriate tools to do a flash install of a factory default image,I got the default operating system that the phone came with, as well as adb-tools required to perform a system wide flash seeing as i didn't have that much data on it.
Once everything was set, I followed the step by step instructions that google provided me on the restore to factory setting pages "https://developers.google.com/android/nexus/images". Seeing as I didn't enable developer options when my phone was working, I run into a prerequisite that needed that before I could flash my device.
While running the commands in cmd as an administrator, I run the command -
fastboot flashing unlock command and the console responded with -
FAILED (remote: oem unlock is not allowed)
I went back and reread this step, which was step number 4, It indicated "If necessary, unlock the device's
bootloader by running" the command. so i figured maybe it isn't really necessary, I proceeded to run the flash-all.bat
script, and it FAILED at every step saying -
FAILED (remote: device is locked. Cannot flash) //corresponding .img file//
It failed to flash my nexus 5x at every stage. So I did some research and found out that the problem was
that in the fastboot menu, the Device state was locked in a very assuring green color, and every where I
searched it indicated that this option to unlock the device was in the developer settings in the phones
OS, which is rather odd to put such a feature in the phones OS and fail to include the option in the fastboot menu. I
couldn't find any tool or assistance change the status of the device state to unlocked.
Now my question is, how can I change the device state to unlocked without enabling this options prior in the OS seeing
as i cant do that because my phone isn't coming on at all. any assistance or help would be highly appreciated.
Point of clarification, I have tried everything in accordance to what google nexus support pages have showed
me to the letter.
Click to expand...
Click to collapse
Every phone have boot. Img system . I also have a same fault redmi k20 pro. But i succeed to give rebirth it. Try to using fastboot commands only and flash fastboot flash boot boot. Img it will work definitely
HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me
sjmahmoudi said:
HTC One M9
Android 6
Bootloader Locked
S=On
USB debugging disable
today I found my phone stock on decryption screen! I did not enable encryption mode. now my phone says: your phone is encrypted. to decrypt your phone, enter your Screen lock password.
it does not matter what number I enter! every number I enter, it says: Decryption unsuccessful. the password you entered is correct, but unfortunately, your data is corrupt. to resume using your phone, you need to perform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google Account.
But nothing happened when I press the "reset phone" button. I waited 4 hours but it remains on a window named "Factory data reset, Rebooting..." but it can not proceed to reboot.
when I power off and go to bootloader, I can not go to recovery mode. on recovery mode, there is only a triangle with a red exclamation mark.
I download a stock ROM so I can flash it to my phone from download mode, but at the beginning of flashing process it comes with this error
12 RU_ZIP_ERROR
please help me
Click to expand...
Click to collapse
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply a RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.
If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.
computerslayer said:
this problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your sku and whether or not there really is a hardware issue or not, it may be possible to apply a ruu, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your os version, which will help us determine your phone's sku.
Click to expand...
Click to collapse
os: 3.35.401.32
shivadow said:
If you put the phone in download mode and plug it into a pc then run fastboot.exe with the cli command 'fastboot getvar all' you will get a lot of important information.
If you are absolutely sure your phone has never been modified and it shows on the fastboot output "status modified" then you can assume your phone has hardbricked from a faulty nand. Only HTC can fix it in the case.
Beamed in by telepathy.
Click to expand...
Click to collapse
I rooted this phone when I first bought it. but 4 months ago I unroot it so I could update it's android to marshmallow. after unrooting, i receive the android update and everything was as normal as a fresh unrooted phone.
I was able to go to download mode when first my phone faced this problem. but now the download mode is not available
it says: failed to boot to download mode
press volume up or down to back to menu
this build is for
development purposes only
do not distribute outside of HTC
without HTC's written permission.
Failure to comply may
lead to legal action.
computerslayer said:
This problem has been posted from time to time by other users - it often indicates a corrupt chip in the motherboard.
Depending on your SKU and whether or not there really is a hardware issue or not, it may be possible to apply an RUU, which would effectively restore your phone to factory state (though it will wipe your internal memory).
Please post your OS version, which will help us determine your phone's SKU.
Click to expand...
Click to collapse
I took my m9 to HTC service center. he said that main chip must be replaced. after replacing the chip, he said that I need a dump.bin file and I do not have it. now after 3 months, my dear m9 is still on the service center . I search all over the net for the dump.bin file but there is nothing at all.
I do not even know what the hell is the dump.bin file. he said that your phone can boot but it will not have antenna without relevant dump file. I'm confused please help me
my phone model ID: 0PJA100
Did you give your phone to an official HTC service center? HTC should have the needed file so the fact that you should provide it to the service center confuses me a bit.
It's impossible to get that file (from a working phone) without a JTAG device and I doubt that many M9 owners have one since they're quite expensive. Sorry for the bad news.
Hello there!
I just bought a Razer Phone from a guy who said that it has a bad motherboard...I bought it pretty cheap and tried to revive it, because why not, i ve done this to other phones.
The phone was somehow reset, it boots until the setup wizard, where i can set the language , emergy call or maginification without problems...
The problem is that if i press " Get Started ", it popps a message like "setup wizard keeps stopping" and so on...i cant pass that screen, the message appears everytime i press "get started" button.
So, i tried flashing... The phone boots like is an unlocked one, but no fastboot/adb ?!
So, the only chance was adb sideload. I pushed different roms / factory images... Nothing.
Hardly, i found an OTA.ZIP file, and tried to sideload it. It worked till 47% ... Then, it said that "PACKAGE IS FOR CHERYL BUT EXPECTED CHERYL-CKH"... not a single rom/factory image worked like this... It loads near 50%, when the other stop right after start.
Later, i discovered i have the US carrier version cheryl-CKH ... And i cant find it's OTA...if one of you can provide me, i ll be very grateful, even buy you a beer or smth.
Thank you ! And please help me...
Edit: i also tried with EDL mode, with Qualcomm Flash Image Loader , but i dont have/know the Programmer Path & Search Path.
I'd advise to unlock the bootloader following the instructions here; make sure to unlock the critical partition as well.
https://developer.razer.com/razer-phone-dev-tools/general-instructions/
Then flash the stock factory image of your choice from here;
https://developer.razer.com/razer-phone-dev-tools/factory-images/
When you unzip these factory images, there is a flash_all.bat file to double click and it should do it all for you.
The phone should be good to go after this. I did this recently on my razer after spending some time flashing some of the 9.0 pie GSI images and it worked great.
Following this new tutorial (ONLY for GLOBAL versions!) you can continue enjoying your Xiaomi Redmi Note 8 Pro, so...
Click to expand...
Click to collapse
LET'S GO!
You'll need:
1. Download the file to your PC "MiFlashPro" (v4.3.1106.23)
2. Download firmware stock "begonia_global_images_V10.4.2.0.PGGMIXM"
3. An authorized Xiaomi Mi Service account.
Download and decompress the stock firmware on your desktop "begonia_global_images_V10.4.2.0.PGGMIXM" and follow this steps:
1.1- Instal and run MiFlashPro.
1.2- Go to the installation path in: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool\mi), execute as administrator the file "account_auth.exe" and log into an authorized Xiaomi service account.
1.3- Go to the installation path in: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool), execute"flash_tool.exe".
(The program will open and you will have to select three files)
2.1- Download-Agent: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin)
2.2- Scatter-loading File: On your desktop, inside the folder "begonia_global_images_V10.4.2.0.PGGMIXM.... images", is called MT6785_Android_scatter.txt
3.3- Authentication File: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool/auth_sv5.auth)
1.4- Click on the "Download" button
1.5- With the phone turned off... connect the USB cable to the PC (ONLY TO THE PC, the other end you still don't connect).
1.6- Press the VOL + button on your phone and now connect the cable to your phone meanwhile you press the VOL + button
1.7- The firmware flashing process will start, wait a bit.
Now you can enjoy again your Xiaomi Redmi Note 8 Pro
klurosu said:
LET'S GO!
You'll need:
1. Download the file to your PC "MiFlashPro" (v4.3.1106.23)
2. Download firmware stock "begonia_global_images_V10.4.2.0.PGGMIXM"
3. An authorized Xiaomi Mi Service account.
Download and decompress the stock firmware on your desktop "begonia_global_images_V10.4.2.0.PGGMIXM" and follow this steps:
1.1- Instal and run MiFlashPro.
1.2- Go to the installation path in: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool\mi), execute as administrator the file "account_auth.exe" and log into an authorized Xiaomi service account.
1.3- Go to the installation path in: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool), execute"flash_tool.exe".
(The program will open and you will have to select three files)
2.1- Download-Agent: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool/MTK_AllInOne_DA_mt6765_mt6785.bin)
2.2- Scatter-loading File: On your desktop, inside the folder "begonia_global_images_V10.4.2.0.PGGMIXM.... images", is called MT6785_Android_scatter.txt
3.3- Authentication File: (C:\Program Files (x86)\MiFlashPro\SP_Flash_Tool/auth_sv5.auth)
1.4- Click on the "Download" button
1.5- With the phone turned off... connect the USB cable to the PC (ONLY TO THE PC, the other end you still don't connect).
1.6- Press the VOL + button on your phone and now connect the cable to your phone meanwhile you press the VOL + button
1.7- The firmware flashing process will start, wait a bit.
Now you can enjoy again your Xiaomi Redmi Note 8 Pro
Click to expand...
Click to collapse
Where can we get authorised account for free
girishjangir7 said:
Where can we get authorised account for free
Click to expand...
Click to collapse
sadly there is NOT auth accounts for free
I think that there already was a guide describing this process. But thanks anyway.
polfrank said:
I think that there already was a guide describing this process. But thanks anyway.
Click to expand...
Click to collapse
There is NO guide for that.
Or you have a partner's Xiaomi business or you must to spend 200 bucks (more or less).
One of this persons will CREATE an service authorized account for you.
That's it
send from an RMN8 Pro (xiaomi.eu custom rom)
klurosu said:
There is NO guide for that.
Or you have a partner's Xiaomi business or you must to spend 200 bucks (more or less).
One of this persons will CREATE an service authorized account for you.
That's it
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
I meant this thread in XDA:
https://forum.xda-developers.com/re...ide-unbrick-stuck-da-mode-authorised-t4000433
which explains basically the same thing.
klurosu said:
There is NO guide for that.
Or you have a partner's Xiaomi business or you must to spend 200 bucks (more or less).
One of this persons will CREATE an service authorized account for you.
That's it
send from an RMN8 Pro (xiaomi.eu custom rom)
Click to expand...
Click to collapse
Huh, it's not just binding your PRIVATE pc with your Mi account. Auth_whatever.exe allow me to login without any errors, ready to flash message not red unauthorised account warning.
I think my account authorized because either I plead to them for giving me authority to FLASH when on RN3PRO BIG MESS CASE, I must apply form in CHINESE (there was tutorial because I dunno any Chinese). I need one because very hardbrick after flashing alpha rom, yes one dead phone with no fastboot / recovery revived :silly:
Either that or because my account bonded and already unlock dozens different models devices (I am reseller, some people especially old ppl and technology illiterate ones let me managed their phones account).
Binded account unfortunately won't be able to be used on other pc. I got a notice that I will only got limited access for a week or so if I change the pc I Binded, so sharing is impossible.
If you ever ask authority to flash in Chinese and got accepted (I need to wait 5 days after submitting request) chance you got one authorized account
Hello,
I tried to use my standard mi account, just in case (spoiler, didn't work) and the download process is stuck at the state it is just before pluging the phone. I mean, pluging the phone does not start anything, but still my computer sees the phone. The flash tool does not display any error about authorization.
Does anyone know if it's a normal behaviour ? It sounds a bit strange not to display any error.
ScarletVeil said:
Huh, it's not just binding your PRIVATE pc with your Mi account. Auth_whatever.exe allow me to login without any errors, ready to flash message not red unauthorised account warning.
I think my account authorized because either I plead to them for giving me authority to FLASH when on RN3PRO BIG MESS CASE, I must apply form in CHINESE (there was tutorial because I dunno any Chinese). I need one because very hardbrick after flashing alpha rom, yes one dead phone with no fastboot / recovery revived :silly:
Either that or because my account bonded and already unlock dozens different models devices (I am reseller, some people especially old ppl and technology illiterate ones let me managed their phones account).
Binded account unfortunately won't be able to be used on other pc. I got a notice that I will only got limited access for a week or so if I change the pc I Binded, so sharing is impossible.
If you ever ask authority to flash in Chinese and got accepted (I need to wait 5 days after submitting request) chance you got one authorized account
Click to expand...
Click to collapse
Could you pm me from where you got the Chinese application form and tutorial? (any website address?) I need it badly, my RN8PRO bricked
Auth Account
klurosu said:
sadly there is NOT auth accounts for free
Click to expand...
Click to collapse
Where can we buy an authorized mi account officially
Thread cleaned
Please do not recommend/discuss/advertise paid remote unlock services on XDA as we do not support such business.
Please read the FORUM RULES especially those:
13. Advertising and Income Generation
Commercial advertising, advertising referral links, pay-per-click links, all forms of crypto-mining and other income generating methods are forbidden. Do not use XDA-Developers as a means to make money.
Thank you for your understanding.
strongst
Forum Moderator
Hi, my r8 pro has bricked recently, i'm really scared, can you help me? i already tried these options:
°boot > recovery = black screen
°boot > fastboot = black screen
°boot = black screen
°i disassembly my cellphone and disconected and re conected the battery but nothing
°i'm trying to drain battery power to 0% because it was charged to 80% and now i'm connecting some things to negative and positive parts of the cable of the battery to consume energy and drain the battery
°i tried "test point" but it is the same has enter to the recovery (vol+ pwr) because it boot to the recovery, and it ask me for MI account authorized when i try to flash stock rom in sp download tool
my redmi note 8 pro only led blinks when i connect the usb to my pc or when i charge it.
Can you help me? please. my discord
zumboy#2354
Haven't they changed the need for an authorized account? I bricked my RN8P and tried this.. the first time I used my mi account I got an error upon login, but the second time I tried it a bit later, it worked.. Does this mean I have an authorized account now? The unbrick process worked like a charm btw. I however, had the preloader files installed as stated somewhere else on this forum (preloader_begonia and lk).
Krakiathan said:
Haven't they changed the need for an authorized account? I bricked my RN8P and tried this.. the first time I used my mi account I got an error upon login, but the second time I tried it a bit later, it worked.. Does this mean I have an authorized account now? The unbrick process worked like a charm btw. I however, had the preloader files installed as stated somewhere else on this forum (preloader_begonia and lk).
Click to expand...
Click to collapse
when you tried that? i have a bricked r8 pro without authorized account.
error:status brom cmd fail(0xc0060005)请问这个怎么解决？
ScarletVeil said:
I think my account authorized because either I plead to them for giving me authority to FLASH when on RN3PRO BIG MESS CASE, I must apply form in CHINESE (there was tutorial because I dunno any Chinese). I need one because very hardbrick after flashing alpha rom, yes one dead phone with no fastboot / recovery revived :silly:
If you ever ask authority to flash in Chinese and got accepted (I need to wait 5 days after submitting request) chance you got one authorized account
Click to expand...
Click to collapse
Is that the same case as The Great Anti Rollback Pandemic? I've messed up my Note 5 Pro and missed the chance to apply for special permission, so got that bad boy resurrected with a bypassed xiaomi flash.
kekesed97 said:
Is that the same case as The Great Anti Rollback Pandemic? I've messed up my Note 5 Pro and missed the chance to apply for special permission, so got that bad boy resurrected with a bypassed xiaomi flash.
Click to expand...
Click to collapse
That is all thats needed for RN8 Pro as well.
Stuck in recovery
Hi guys
i'm stuck with my RN8P CN, I've made mistakes while thinking I have a global version but instead I have CN version. So now my phone is stuck with no rom and I have thestock recovery, the bootloader is locked, fastbook is ok.
But when i want to use mi unlock to install TWRP and the stock rom it failed saying "please add your account in MIUI settings".
How can i do that without a rom ? Or so, do you have a guide for getting back a stock phone with stock recovery/rom ?
Thanks in advance guys
Gary
GaryBogard said:
Hi guys
i'm stuck with my RN8P CN, I've made mistakes while thinking I have a global version but instead I have CN version. So now my phone is stuck with no rom and I have thestock recovery, the bootloader is locked, fastbook is ok.
But when i want to use mi unlock to install TWRP and the stock rom it failed saying "please add your account in MIUI settings".
How can i do that without a rom ? Or so, do you have a guide for getting back a stock phone with stock recovery/rom ?
Thanks in advance guys
Gary
Click to expand...
Click to collapse
Unfortunately, there is no helping as per today for your condition. Your only choises is:
Go to Xiaomi Service Center nearby,
Buy a Third Party smart box based flash solution (it cost fortune, but worth for investment if you see your smartphone as "toys").
Buy a Third Party account to authenticate flash with third party flash solution (No smartbox needed, and cost a fraction of fortune).
Go to a nearest phone repair shop (They usually have one of two flash solution above, cost around $20-$30, depends on your region)
Use a Remote-based flash solution (You connect your phone to your computer, repairman will ask you to install necessary tools, and control your PC via remote desktop)
Buy a new phone (totally cost an arm and leg)
As none of solution above is supported by this community, you will have to go on your own.
Cheers.