Related
hi, tried to search everywhere but to no avail soo far.. does anyone knows if there is an existing root guide for LG G4 Beat? its sort of a diff model but there's no sub for it so i guess ill put it at here since its still under G4 family.. :/
Do you have Android 5.0 or 5.1 installed?
First of all. Before you start to try root, download the kdz file for your phone.
The kdz is needed if something went wrong (e.g. phone not booting).
You can use the LG Flash Tool to flash the kdz to a bricked phone.
Use this link with your IMEI:
Code:
http://csmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI
If it works, please post the download link for the "kdz".
Or better post the output too, but delete your IMEI!
Your link will only work if you type:
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
and then add the rest of your url instead of the given link.
It's worth trying. You need to get a partition layout. Then @autoprime will give a full command to run in DL mode for dumping the system image, and flashing it once it's been injected with root. I can inject it for you once you have the system.img dump.
I wrote an guide how you can extract the GPT and calculate the dd parameters:
[How to] Determine dd Parameters For All LG G4 Models
http://forum.xda-developers.com/g4/h...lg-g4-t3184867
Do you know how to work with linux?
Please post the outputs of gdisk into a HIDE and CODE tag. Thank you.
Maybe you are a advanced user and can Inject root yourself with the autoroot.sh method (Inject_Root_G4.zip)?
Or do you need help?
I think you have Android 5.1.1 installed, so it is not possible to use Kingroot to root your device. Is that right?
dominik-p said:
I wrote an guide how you can extract the GPT and calculate the dd parameters:
[How to] Determine dd Parameters For All LG G4 Models
http://forum.xda-developers.com/g4/h...lg-g4-t3184867
Do you know how to work with linux?
Click to expand...
Click to collapse
Wow, thanks for that guide! I've been trying to figure out how to find the right dd params forever.
tabp0le said:
Wow, thanks for that guide! I've been trying to figure out how to find the right dd params forever.
Click to expand...
Click to collapse
Pleasure.
I think some people also knew how to do it, but no one wanted to write a guide.
AND ALWAYS CONSIDER:
You can brick your phone if you don't know what you are doing.
Backup your files before you change anything.
i think i got the link for the KDZ.. but when i
dominik-p said:
Do you have Android 5.0 or 5.1 installed?
First of all. Before you start to try root, download the kdz file for your phone.
The kdz is needed if something went wrong (e.g. phone not booting).
You can use the LG Flash Tool to flash the kdz to a bricked phone.
Use this link with your IMEI:
[CODEcsmg.lgmobile.com:9002/csmg/b2c/client/auth_model_check2.jsp?esn=IMEI[/CODE]
If it works, please post the download link for the "kdz".
Or better post the output too, but delete your IMEI!
Your link will only work if you type:
csmgdl.lgmobile.com/dn/downloader.dev?fileKey=
and then add the rest of your url instead of the given link.
Click to expand...
Click to collapse
ok i think i did it correctly.. heres the link
downloader.dev?fileKey=FWDEYI0132FMAUI263CCLO1/H73510b_00.kdz (had to cut it short cuz forum would not let me post new link :/ csmgdl.lgmobile.com/dn/ was before 'downloader')
heres the output file..
<response req_cmd="auth_model_check" status="OK">
<auth_model_check><result>OK</result>
<esn>-----MYIMEI----</esn>
<model>LGH735</model><suffix>ASEATS</suffix><msn>508KPUU032390</msn><esn_date/>
<sw_version>H73510B_00</sw_version>
<sw_url>fileKey=FWDEYI0132FMAUI263CCLO1/H73510b_00.kdz</sw_url> pkg03.lime.gdms.lge.com/dn/downloader.dev?
<sw_locale_url/><sw_recommand_uri/><app_version/><app_url/>
<cs_em_flag>N</cs_em_flag>
<cs_em_uri>N</cs_em_uri>
<chip_type>EG</chip_type>
<prod_type>2</prod_type>
<buyer>SEA</buyer>
<file_name>H73510b_00.kdz</file_name>
</auth_model_check></response>
and yes its 5.1..
would be nice if theres a step by step guide cuz last phone i tired rooting was prolly galaxy tab and it was wayy easier :/
Ok, well done. Is 10b the same version as currently installed on your device?
Some other details would be interesting:
Do you have an unbranded device?
Where did you buy it / where do you live? (country)
Are you an advanced user? Do you know how to work with linux?
The next steps will be:
Calculate your dd parameters and backup your system partition into a img file. Read my guide:
[How to] Determine dd Parameters For All LG G4 Models
http://forum.xda-developers.com/g4/h...lg-g4-t3184867
Please post the outputs of gdisk into a HIDE and CODE tag.
Post your calculated dd parameters, so that we can verify it.
IMPORTANT: Keep the original (unchanged) system.img on your computer (zip it).
Then:
Copy the img file to a linux system and mount it. Create a testfile (test.txt) on the mounted system partition.
Copy the img file back to your phone and try to "dd" it back over your system partition.
Check if you see the testfile on your system partition.
If that worked you have successfully overwritten your system partition.
Then:
Try to inject root with the Inject_Root_G4.zip on your linux system.
Copy the new img file to your phone and "dd" it over your system partition.
Please ask if you are not 100% sure what to do.
You are responsible for what you are doing with your device.
Backup all your data (photos, videos, messages...) before going one step further.
dominik-p said:
Ok, well done. Is 10b the same version as currently installed on your device?
Some other details would be interesting:
Do you have an unbranded device?
Where did you buy it / where do you live? (country)
Are you an advanced user? Do you know how to work with linux?
The next steps will be:
Calculate your dd parameters and backup your system partition into a img file. Read my guide:
[How to] Determine dd Parameters For All LG G4 Models
http://forum.xda-developers.com/g4/h...lg-g4-t3184867
Please post the outputs of gdisk into a HIDE and CODE tag.
Post your calculated dd parameters, so that we can verify it.
IMPORTANT: Keep the original (unchanged) system.img on your computer (zip it).
Then:
Copy the img file to a linux system and mount it. Create a testfile (test.txt) on the mounted system partition.
Copy the img file back to your phone and try to "dd" it back over your system partition.
Check if you see the testfile on your system partition.
If that worked you have successfully overwritten your system partition.
Then:
Try to inject root with the Inject_Root_G4.zip on your linux system.
Copy the new img file to your phone and "dd" it over your system partition.
Please ask if you are not 100% sure what to do.
You are responsible for what you are doing with your device.
Backup all your data (photos, videos, messages...) before going one step further.
Click to expand...
Click to collapse
what do u mean 10b?
not really unbranded i guess? its a mid-tier version of the LG G4.. this is the phone.. http://www.lg.com/sg/mobile-phones/lg-G4-Beat
dont think its out at the US yet
bought it at Singapore as i recontacted my phone
nope i dont know how to use linux and im %100 not sure what to do :crying:
Ok so you are not a advanced user?
10b is the version of the kdz file. Goto Settings->Phone info->software version on your phone and post your software version.
First of all: It is not possible to root your phone without linux!
You don't have to install a linux on your computer (physically) but at least in an virtual environment (virtualbox, vmware player) or as a live distribution.
What you can do without linux is try to extract the GPT.
Which OS is installed on your computer (Win 7, 8, 10)?
Download the LG_Root.zip from
http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
It contains the Send_Command.exe
You need this tool to open a special console when your phone is in download mode.
Do you know this tool and how to enter the download mode?
dominik-p said:
Ok so you are not a advanced user?
10b is the version of the kdz file. Goto Settings->Phone info->software version on your phone and post your software version.
First of all: It is not possible to root your phone without linux!
You don't have to install a linux on your computer (physically) but at least in an virtual environment or as a live distribution.
What you can do without linux is try to extract the GPT.
Which OS is installed on your computer (Win 7, 8, 10)?
Download the LG_Root.zip from
http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
It contains the Send_Command.exe
You need this tool to open a special console when your phone is in download mode.
Do you know this tool and how to enter the download mode?
Click to expand...
Click to collapse
no im not an advanced user..
its software version is : V10b-SEA-XX
so i guess its a 10b?
im using windows 7 right now
Yes you have 10b installed now.
The XX means that it is unbranded.
SEA means southeast asia.
Win 7 is fine. Send_Command will work.
Download the zip from the above-mentioned thread.
Then:
Power off your device
When the device is powered off, hold volume up and insert a USB cable connected to the PC
Wait for the drivers to install
Click to expand...
Click to collapse
and follow the steps 7-9.
dominik-p said:
Yes you have 10b installed now.
The XX means that it is unbranded.
SEA means southeast asia.
Win 7 is fine. Send_Command will work.
Download the zip from the above-mentioned thread.
Then:
and follow the steps 7-9.
Click to expand...
Click to collapse
so i just download it, put it at desktop and skip all the methods till 6-9? do i have to enable developer mode before doing it?
No you don't need developer mode.
But it is no problem if you enabled it.
Are you able to open the console with Send_Command.exe?
dominik-p said:
No you don't need developer mode.
But it is no problem if you enabled it.
Are you able to open the console with Send_Command.exe?
Click to expand...
Click to collapse
i opened send_command.exe but it just closes back.. mine is at COM1 but idk how to change it
Update: it says NOTE: Do not attempt this on devices with 5.1.1 , at the time this method was posted it worked on many firmware 5.0.2 should i still go for it? im using 5.1.1
We won't follow the guide. We will do it like here:
http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765
(You will also find the thread is linked there.)
The thread is just a good help for the Send_Command tool.
You don't have to change the COM port.
Are you in download mode? Do you see the "Firmware Update" screen?
Use the ports.bat and note the "netdiag" COM port.
Inside of LG_Root folder hold shift and right click a blank space you should see "Open command window here"
Click to expand...
Click to collapse
Then enter:
Code:
Send_Command.exe \\.\COM#
Replace # with your number.
dominik-p said:
We won't follow the guide. We will do it like here:
http://forum.xda-developers.com/g4/orig-development/root-tmo-vzw-intl-variants-soon-root-lg-t3164765
(You will also find the thread is linked there.)
The thread is just a good help for the Send_Command tool.
You don't have to change the COM port.
Are you in download mode? Do you see the "Firmware Update" screen?
User ports.bat and note the "netdiag" COM port.
Then enter:
Code:
Send_Command.exe \\.\COM#
Replace # with your number.
Click to expand...
Click to collapse
Yup its in download mode i have the firmware update on my screen.. still to no avail i also installed LG driver and restarted.. opened send_command.exe it just closes back
or do i just enter the script after the # after special command? at because im now at this part http://i.imgur.com/fre9Z9l.png just that when i double-click send command it just closes back
dreamnoob said:
Yup its in download mode i have the firmware update on my screen.. still to no avail i also installed LG driver and restarted.. opened send_command.exe it just closes back
or do i just enter the script after the # after special command? at because im now at this part http://i.imgur.com/fre9Z9l.png just that when i double-click send command it just closes back
Click to expand...
Click to collapse
are you opening send command from the command prompt?
Do NOT double click on the Send_Command.exe
READ again:
Inside of LG_Root folder hold shift and right click a blank space you should see "Open command window here"
Click to expand...
Click to collapse
Then enter "Send_Command.exe \\.\COM#"
dominik-p said:
Do NOT double click on the Send_Command.exe
READ again:
Then enter "Send_Command.exe \\.\COM#"
Click to expand...
Click to collapse
oh okay means im on the right path..
so now i just do this as follows?
Type "id" and press enter (no quotes).
You should get back some text starting with "uid=(0)root gid=(0)root". If not, press CTRL-C, and do step 9 again (the application sometimes doesn't respond on the first command).
Run the command specified in the section below titled 'Commands to Run' to flash the rooted system image.
After a few minutes of sitting, you should get back a "#" prompt. This indicates the process has finished.
Type "LEAVE" (no quotes) and press enter. Your phone should reboot, and your phone will be rooted.
Hello everybody, so I noticed a lot of people struggling with marshmallow + autorec hard bricks (symptoms: no download mode, no recovery, black screen)
Just to make sure: I'm not responsible for any damages done. This worked for me perfectly, should work for you too. Use it only if you bricked D855 30B!!! (Marshmallow)
Here's what you have to do to fix that:
First follow this amazing guide by senior member l33tlinuxh4x0r, big thanks to him. ---> LINK TO GUIDE
Important stuff: You need to install qualcomm drivers (windows 8, 10 users need to disable driver signature enforcement), you need to short the circuit of your phone, like it's shown in that guide, by shorting it correctly and plugging it in you immediately get connection (keep note of that, there's no need to wait for something, no sound - redo.)
Instead of extracting tot, like it's shown there, use attached files (target Dir). Then again, flash them like it's shown in the tutorial. You should be good to go.
DOWNLOAD HERE
Didn't know where to upload, so sorry for using this abomination
hi...please help~
catercousin said:
Hello everybody, so I noticed a lot of people struggling with marshmallow + autorec hard bricks (symptoms: no download mode, no recovery, black screen)
Just to make sure: I'm not responsible for any damages done. This worked for me perfectly, should work for you too. Use it only if you bricked D855 30B!!! (Marshmallow)
Here's what you have to do to fix that:
First follow this amazing guide by senior member l33tlinuxh4x0r, big thanks to him. ---> LINK TO GUIDE
Important stuff: You need to install qualcomm drivers (windows 8, 10 users need to disable driver signature enforcement), you need to short the circuit of your phone, like it's shown in that guide, by shorting it correctly and plugging it in you immediately get connection (keep note of that, there's no need to wait for something, no sound - redo.)
Instead of extracting tot, like it's shown there, use attached files (target Dir). Then again, flash them like it's shown in the tutorial. You should be good to go.
DOWNLOAD HERE
Didn't know where to upload, so sorry for using this abomination
Click to expand...
Click to collapse
i don't get what the meaning "use attached files (target Dir). Then again, flash them like it's shown in the tutorial. You should be good to go. "
can u explain how to done this step???
is this hard brick the result of using the Autorec MM or the old Lollipop one?
shun95 said:
i don't get what the meaning "use attached files (target Dir). Then again, flash them like it's shown in the tutorial. You should be good to go. "
can u explain how to done this step???
Click to expand...
Click to collapse
Select the attached download folder as "Target DIR" in the application, it will load the files and let you flash them like it's shown in the tutorial
Broloff said:
is this hard brick the result of using the Autorec MM or the old Lollipop one?
Click to expand...
Click to collapse
The Lollipop one
Hi thank you for this post
catercousin said:
Hello everybody, so I noticed a lot of people struggling with marshmallow + autorec hard bricks (symptoms: no download mode, no recovery, black screen)
Just to make sure: I'm not responsible for any damages done. This worked for me perfectly, should work for you too. Use it only if you bricked D855 30B!!! (Marshmallow)
Here's what you have to do to fix that:
First follow this amazing guide by senior member l33tlinuxh4x0r, big thanks to him. ---> LINK TO GUIDE
Important stuff: You need to install qualcomm drivers (windows 8, 10 users need to disable driver signature enforcement), you need to short the circuit of your phone, like it's shown in that guide, by shorting it correctly and plugging it in you immediately get connection (keep note of that, there's no need to wait for something, no sound - redo.)
Instead of extracting tot, like it's shown there, use attached files (target Dir). Then again, flash them like it's shown in the tutorial. You should be good to go.
DOWNLOAD HERE
Didn't know where to upload, so sorry for using this abomination
Click to expand...
Click to collapse
I've the same problem as you describe here.After I upgraded g3 to marshmallow I applied autorec and my device became hard brick.now my phone under com ports as Qualcomm 9008.
from this point I'm confused that which way to go the first your description 'Instead of extracting tot, like it's shown there, use attached files (target Dir)', Then again, flash them like it's shown in the tutorial'',the second tot file of the rom that we were running. (not older not newer same version).The first way I did not understand attached files where are they ?
if I follow the second way how can I find tot of my rom D855 30B!!! (Marshmallow)?
thank you waiting your help
Instead of tot you use the files from the download link in my post since you don't need to extract tot now, just mark that folder in "target dir" and follow the second guilde, as you call it. Good luck!
Help
catercousin said:
Hello everybody, so I noticed a lot of people struggling with marshmallow + autorec hard bricks (symptoms: no download mode, no recovery, black screen)
Just to make sure: I'm not responsible for any damages done. This worked for me perfectly, should work for you too. Use it only if you bricked D855 30B!!! (Marshmallow)
Here's what you have to do to fix that:
First follow this amazing guide by senior member l33tlinuxh4x0r, big thanks to him. ---> LINK TO GUIDE
Important stuff: You need to install qualcomm drivers (windows 8, 10 users need to disable driver signature enforcement), you need to short the circuit of your phone, like it's shown in that guide, by shorting it correctly and plugging it in you immediately get connection (keep note of that, there's no need to wait for something, no sound - redo.)
Instead of extracting tot, like it's shown there, use attached files (target Dir). Then again, flash them like it's shown in the tutorial. You should be good to go.
DOWNLOAD HERE
Didn't know where to upload, so sorry for using this abomination
Click to expand...
Click to collapse
The link is DEAD...
Maybe someone can reupload? I messed up and didn't save it in my computer, didn't think I'd need it anymore. Oops.. Or create them yourself
You need do extract .kdz, then .dz,
use this guide to create partition.txt
http://forum.xda-developers.com/lg-g2/general/how-to-create-partition-txt-file-kdz-t3109859
and rename files to ****.mbn
i just had my phone back to normal after marshmallow autorec brick
Get the right tools from scamex only..
U going to need :
Qdloader hs-usb driver for your pc 32/64bit
Install it
Then get smart boot diagnostic tool
Along that also get ap-chip dll and att
Then extract it the ap folder inside smart boot diagnostic tool
Get document to shows how to flash a "dead boot"
Then run thr smart boot diagnostic tool
Then follow instruction from the document and pay attention on page 14, 15 & 16
After recovering qfprom anti-roolback issue.
Your phone should be back to normal as before the autorec root hardbrick
catercousin said:
Maybe someone can reupload? I messed up and didn't save it in my computer, didn't think I'd need it anymore. Oops.. Or create them yourself
You need do extract .kdz, then .dz,
use this guide to create partition.txt
http://forum.xda-developers.com/lg-g2/general/how-to-create-partition-txt-file-kdz-t3109859
and rename files to ****.mbn
Click to expand...
Click to collapse
hey, the guide from the link is gone. do you happen to remember how to get partition.txt from .kdz ...or do you have one?
Hey!
Can anyone reupload the files from the OP?
Thanks!
Link is dead, can someone reupload the files please!?
unbelieveable.
every single link is dead for this
GET DROPBOX.
shoaibiftekhar said:
hey, the guide from the link is gone. do you happen to remember how to get partition.txt from .kdz ...or do you have one?
Click to expand...
Click to collapse
Still the case.
Could anyone help, please?
I found a guide to create "partition.txt" (maybe a copy the original guide here) but that's for the G2.
Any help is greatly appreciated :crying:
Can anyone help me?
I flash a wrong recovery then it cnnot go to
download mode.they say that i need to jtag it
Can i do it my self?
Please help me
give me some instruction on how to jtag it
(LG G3 F400L)
Stiffmeistro said:
Can anyone help me?
I flash a wrong recovery then it cnnot go to
download mode.they say that i need to jtag it
Can i do it my self?
Please help me
give me some instruction on how to jtag it
(LG G3 F400L)
Click to expand...
Click to collapse
hello, if there is no juice, you can try to do as I did to my D855, I think it is the same, you will need to open your device and make a trick to go to downlaod mode.
IT is very esay that I put my LG G3 in download mode in 3minutes.
---------- Post added at 02:19 AM ---------- Previous post was at 02:08 AM ----------
just go with this guide , it is good.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I did like it said and I got my phone repaired.
But, in step 8, I suggest you to not flash all stuff, because I think It is not necessary, I am pretty sure this was my cause to have the message : "Can't find matched cust for NT-code mcc/mnc"
I hard bricked my phone a second time, but instead of doing step 8 like he says. I just Made SDRAM test also and start. it will flash necessary stuff and reboot phone automatically.
To make a summary of what you need to do:
-- first put your windows in test mode if you have windows 64bits and install drivers
1-put your phone in download mode (screen off and without battery-sort of emergency download mode)
2-run boarddiag by willcracker and extract your Bin file in a folder.
3-choose port and choose folder
4-run the AP check and EMMC test
5-Run AP check, Emmc test and SDRAM test
6-phone will reboot
7-put him in download mode and flash you tot file
Done!
all files in the link
majorak said:
hello, if there is no juice, you can try to do as I did to my D855, I think it is the same, you will need to open your device and make a trick to go to downlaod mode.
IT is very esay that I put my LG G3 in download mode in 3minutes.
---------- Post added at 02:19 AM ---------- Previous post was at 02:08 AM ----------
just go with this guide , it is good.
http://forum.xda-developers.com/sprint-lg-g3/general/guide-fix-hard-brick-recovery-guide-t3132359
I did like it said and I got my phone repaired.
But, in step 8, I suggest you to not flash all stuff, because I think It is not necessary, I am pretty sure this was my cause to have the message : "Can't find matched cust for NT-code mcc/mnc"
I hard bricked my phone a second time, but instead of doing step 8 like he says. I just Made SDRAM test also and start. it will flash necessary stuff and reboot phone automatically.
To make a summary of what you need to do:
-- first put your windows in test mode if you have windows 64bits and install drivers
1-put your phone in download mode (screen off and without battery-sort of emergency download mode)
2-run boarddiag by willcracker and extract your Bin file in a folder.
3-choose port and choose folder
4-run the AP check and EMMC test
5-Run AP check, Emmc test and SDRAM test
6-phone will reboot
7-put him in download mode and flash you tot file
Done!
all files in the link
Click to expand...
Click to collapse
Can you explain the step 6-10 in the link you gave to me?
i understand it but i don't know if when i will click the start
btw i did not do anything yet,something is not right in my phone
there's still led lights when im charging sir then suddenly it will begone in a few minutes.
Stiffmeistro said:
Can you explain the step 6-10 in the link you gave to me?
i understand it but i don't know if when i will click the start
btw i did not do anything yet,something is not right in my phone
there's still led lights when im charging sir then suddenly it will begone in a few minutes.
Click to expand...
Click to collapse
first, just skip steps 8 and 9 and replace it with:
it is a little bit mixed up but this is what he wanted to say:
6- choose port and folder where you extracted TOT file.
7- Check "AP" and "EMMC" and press start
here you finished with the link.
8+9- you need to Check "AP" and "EMMC" and SDRAM , click Start.
10-flash you phone with LGUP using Refurbish and choosing the tot file. (I prefer LG UP)
download here:
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 (do not install DLL file from this link)
but first install DLL file: http://downloads.codefi.re/autoprime/LG/LG_G3/LGUP_8974_DLL_Ver_0_5_CODEFIRE.MSI
majorak said:
first, just skip steps 8 and 9 and replace it with:
it is a little bit mixed up but this is what he wanted to say:
6- choose port and folder where you extracted TOT file.
7- Check "AP" and "EMMC" and press start
here you finished with the link.
8+9- you need to Check "AP" and "EMMC" and SDRAM , click Start.
10-flash you phone with LGUP using Refurbish and choosing the tot file. (I prefer LG UP)
download here:
http://forum.xda-developers.com/g4/help/lgup-install-kdz-mm-lp-t3249803 (do not install DLL file from this link)
but first install DLL file: http://downloads.codefi.re/autoprime/LG/LG_G3/LGUP_8974_DLL_Ver_0_5_CODEFIRE.MSI
Click to expand...
Click to collapse
Are you sure this is gonna work?
is this the method you use to your phone?
because i'm gonna do it
where did you get your method or what you did on your phone?
not the link you gave to me but the method you use
Stiffmeistro said:
Are you sure this is gonna work?
is this the method you use to your phone?
because i'm gonna do it
where did you get your method or what you did on your phone?
not the link you gave to me but the method you use
Click to expand...
Click to collapse
II followed the steps in this link as I sayed, but after that I recognised that I had to modify it a little (as I described also)
majorak said:
II followed the steps in this link as I sayed, but after that I recognised that I had to modify it a little (as I described also)
Click to expand...
Click to collapse
MAN, Thanks a lot!!!!!
I just follow your instruction and BAM!!
It work sir
MANY MANY THANKS :good: :fingers-crossed:
Stiffmeistro said:
MAN, Thanks a lot!!!!!
I just follow your instruction and BAM!!
It work sir
MANY MANY THANKS :good: :fingers-crossed:
Click to expand...
Click to collapse
I'm glad you fixed your G3, it is a very good phone
Hello!
I tried to update my Vodafone Branded G4 with the europe not branded version H81520g_00_0720.kdz
The problem ist i just get "error code = 0x2000, invalid command response" from the LGUP software and everytime i start the phone it is in firmware update mode.
Any idea how to fix this?
Greetings
I got this too as I tried to install H81520o_00_0310.kdz then I thought that it is maybe related to the brand. So I download your kdz file and then it was working.
So I would guess try another number is the best what you can do. I believe it is because of selection of "upgrade". If you have a tot file for refurbish, then maybe another is working, but I didn't do this yet.
Probably the problem is the DLL.
Extract the DLL from the KDZ (the one you want to flash) and replace it with the one you have in LGUP (path; C:/Program files/LG Electronics/LGUP/Model/8992).
the_naxhoo said:
Probably the problem is the DLL.
Extract the DLL from the KDZ (the one you want to flash) and replace it with the one you have in LGUP (path; C:/Program files/LG Electronics/LGUP/Model/8992).
Click to expand...
Click to collapse
i have the same problem2.
all the kdz that i download not come with any dll files just a 1.73 gb one file size.
kobisa25 said:
i have the same problem2.
all the kdz that i download not come with any dll files just a 1.73 gb one file size.
Click to expand...
Click to collapse
you must extract it from the KDZ with this tool: Click Here
the_naxhoo said:
you must extract it from the KDZ with this tool: Click Here
Click to expand...
Click to collapse
hi so i extract the kdz from LGExtract&7za& manuall tool& when i use winrar to extract its tell me no archive found i try also in winzip software. do you have any idea what else 2do?
thank you.
You can also try the codefire dll: http://downloads.codefi.re/autoprime/LG/LG_G4
( Download and rename LGFLASH_LG_G4_CODEFIRE.dll )
sfX
GOT IT!
the_naxhoo said:
you must extract it from the KDZ with this tool: Click Here
Click to expand...
Click to collapse
so after a long long search and dosents off error i succeeded
i find the currect kdz ISRAEL one and from it i EXTRACT it with WindowsLGFirmwareExtract-1.2.5.0-Release dll file and downgraded to lollipop 5.5 only with this dll file i make it after i try a few rom stocks that work with the dll.
i want to thank you you direct me to the right way:good:
Hi,
I have LG H811 (T-Mobile) Variant. I receive error from LGUP everytime I try to flash this ROM=h81120x_00_1108.kdz
My LGUP shows COM =COM3 and Version=H81120v
The error is thrown at 9%
Nothing working for me I am very frustrated!!!
PLEASE SOMEBODY HELP ME!
Stuck with LG G4 (H81520i)
Same for me but with LG H81520i. I tried to flash these ROM* with their specific .dll that I extracted thanks to WindowsLGFirmwareExtract-1.2.5.0-Release. Always get "error code = 0x2000, invalid command response" from LGUP. The error is thrown at 16% on the computer, but at 7% on the phone. Now, I'm stuck in download mode. I also tried to change the COM port number, doesn't change anything.
*Europe General H81510B_00.kdz ; Europe OPEN H81510D.kdz ; H81510D_00.kdz ; H81520i_00_0922.kdz ; SEA H81510B.kdz
Only one ROM above matches the LG H81520i (the fourth one).
Informations about my (ex-)android firmware :
- Android version : 6.0 (Marshmallow)
- Kernel version : 3.10.84
- Software version : V20-SEA-XX
PS : H81520i is what is written on the LGUP software
______________________________________________________________________________
I found a solution (after several hours)
Uninstall all your LG softwares (except LG Bridge or others LG backup softwares) and go to 'C:\Program Files (x86)\LG Electronics\' to delete all folders and files.
Go to this link and click on "Download all". Extract the file and follow the instructions :
1) Install "LGMobileSupportTool.exe"
2) Install "LGMobileDriver_WHQL_Ver_4.2.0.exe"
3) Install "LGUP_Install_Ver_1_14_3.msi"
4) Install "LGUP_8994_DLL_Ver_0_0_3_23.msi"
5) Move "LGUP_8994.dll" in the repertory 'C:\Program Files (x86)\LG Electronics\LGUP\model\8994'
6) Open "LGMobile Support Tool" and click on "Install USB driver." to the left
7) Select "LGH815" (or your model) et follow the drivers installation steps
8) Do step 5) again
9) Shut off your LG and plug it to your computer while pressing volume up in order to enter download mode
10) Unplug your LG and the battery
11) Open "LGUP" and close it
12) Do step 9 again (download mode)
13) Open "LGUP", select "UPGRADE" and go select your .kdz file (the ones in the file that you downloaded or another one you have)
14) Click on "Start" and DON'T TOUCH !!!!!!
Big thanks to the people of this reddit post and of this XDA thread
See above
Back To Stock ROM LG G4 H811 (T-Mobile)
LucasDupanne said:
________________________________________________________
First of all, I'm not allowed to post links as a new user , so I put them with spaces that you must delete :laugh: . Good luck !
Uninstall ALL your softwares (except LG Bridge or others LG backup softwares) and go to 'C:\Program Files (x86)\LG Electronics\' to delete all folders and files.
Go to this link ( ht tps : / / ya di . sk /d / KIG5F8 2jmXcUR ) and click on "Download all". After downloading the file, extract it and follow the instructions :
1) Install "LGMobileSupportTool.exe"
2) Install "LGMobileDriver_WHQL_Ver_4.2.0.exe"
3) Install "LGUP_Install_Ver_1_14_3.msi"
4) Install "LGUP_8994_DLL_Ver_0_0_3_23.msi"
5) Move "LGUP_8994.dll" in the repertory 'C:\Program Files (x86)\LG Electronics\LGUP\model\8994'
6) Open "LGMobile Support Tool" and click on "Install USB driver." to the left
7) Select "LGH815" et follow the drivers installation steps
8) Do step 5) again
9) Shut off your LG and plug it to your computer while pressing volume up in order to enter download mode
10) Unplug your LG and the battery
11) Open "LGUP" and shut it
12) Do again step 8 (download mode)
13) Open "LGUP", select "UPGRADE" and go select your .kdz file (your one or the ones in the file that you downloaded)
14) Click on "Start" and DON'T TOUCH !!!!!!
==>> thanks to ' ht tps : / / www .reddit . com /r/lgg4/comments/7anayg/downgraded_from_n_to_mm_and_stuck_in_download / ' post
A french man of 15 years that thanks Lobster_Johnson123 very very much.
PS : Sorry, my english is bad And let me know !!! :fingers-crossed:
Click to expand...
Click to collapse
Thanks Lucas for your time and help. It didn't work for me. I flashed another ROM named H811V20r_00_0111.kdz and it worked like a charm and it's tested on so many devices afterwards which worked fine without a single issue.
Here is the link to the ROM: https://lg-roms.com/official-firmware/LG G4-LGH811VK/H811V20r_00_0111/
Thanks for the help though.
androhead said:
Thanks Lucas for your time and help. It didn't work for me. I flashed another ROM named H811V20r_00_0111.kdz and it worked like a charm and it's tested on so many devices afterwards which worked fine without a single issue.
Here is the link to the ROM:
Thanks for the help though.
Click to expand...
Click to collapse
Happy it worked an other way for you !
i had working H815 version 29A nougat installed but for some reason
( nougat restarting issue ) during flashing H815 version 10d , after 9 percent same error comes , i tried by copying extracted dll from H815 v10d kdz in the LGUP (8994 folder) but nothing works for me,
please friends come to resolve my issue. waiting for reply from xda experts
Sanaullahshuaib said:
i had working H815 version 29A nougat installed but for some reason
( nougat restarting issue ) during flashing H815 version 10d , after 9 percent same error comes , i tried by copying extracted dll from H815 v10d kdz in the LGUP (8994 folder) but nothing works for me,
please friends come to resolve my issue. waiting for reply from xda experts
Click to expand...
Click to collapse
You need H81520p.kdz to downgrade from Nougat!
You can download from here: https://www.4shared.com/file/hfyqh6iEfi/H81520p_00_0314.html
Can also see here if you need more files: https://forum.xda-developers.com/showpost.php?p=76571471&postcount=23
Okay I'll try this but please tell me that
I have to copy lgup_8994.dll from H81520p or use original dll which is installed with the LGUP 8994 installer???
Sanaullahshuaib said:
Okay I'll try this but please tell me that
I have to copy lgup_8994.dll from H81520p or use original dll which is installed with the LGUP 8994 installer???
Click to expand...
Click to collapse
After install everything, replace the one in "C:\Program Files (x86)\LG Electronics\LGUP\model\8994" by the given one (or extract from the H81520p.kdz file).
See on the picture how your phone should be detected in "Device Manager":
http://i1376.photobucket.com/albums/ah39/RuedasLocas/Varios/Sem Tiacutetulo_zpsrrscdqov.jpg
H815v20p flashed correctly but mobile in boot-loop then i back installed H815v10d the original but also restarting
xda experts???
whats the issue in your mind experts XDA???
Sanaullahshuaib said:
H815v20p flashed correctly but mobile in boot-loop then i back installed H815v10d the original but also restarting
xda experts???
whats the issue in your mind experts XDA???
Click to expand...
Click to collapse
You first start your phone with any sim or sd card?
Try to flash it again with the v20p and restart it without any card on it.
If it doesn't solve the problem, try a v10a. Maybe it works and you can upgrade starting from there.
Good luck!
now again I tried H815v29A so it installed after the installation of old original version , now please tell the method of rooting Nougat on H815v29A urgently XDA experts???
also Twrp not installing on H815v29A which was working on marshmallow/////
experts reply???
First of all I want to thank @zogu without him, this guide would not be possible, This guide is for phones with Hard Brick, where the bootloader is destroyed and there are no tools that recognize the phone as odin
When you connect phones without a bootloader, Windows detects them as exynos9820 in device manager.
All of this is accomplished by trial / error method
I repaired my g975f and I have U3 and U8 files only for this model, but I will try to explain how to prepare files for any other model.
We have to use the same bootloader version that was previously on the phone, or if you're not sure, use the latest sboot.bin.
Plug in the phone and press and hold the power button.
Windows will detect the exynos9820 device, install the driver:
click manually,
com and lpt ports,
select the Driver Exynos USB Mode folder
Now we have to copy
WinDNWApi.dll
in:
C: \ Program Files \ Samsung \ Exynos USB Driver \ Drivers
There probably isn't this folder, just create it and copy the files.
Now we have to create the boot files.
Using lz4 1.9.2 we can unzip the sboot.bin.lz4 to sboot.bin and then be able to edit it, everything is explained in a guide inside the file
Download the last sboot.bin that was on your device
Now you have to extract the partitions from this file
In some hex editor, create 4 files and extract from sboot.bin
0x3000 is BL1 name> bl1
0x3000 ... 0x17000 is epbl
0x17000 ... 0x68000 is BL2
0x7e000 ... 0x7eb000 + 0x190000 = 0x1fe000 sboot
Dram_training do not need to be cut, it is not used in flashing
0x244000 ... 0x1BD000 is el3mon dram
Launch multiuploader.exe
Plug in the phone and press and hold the power button.
Search and find script.cfg
click start and the phone will go into odin mode.
Start odin and flash the firmware (in case of having split the stock rom sboot) or Combination (in case of having split the combination sboot)
the z-zip tool must be downloaded
Binary editor - Multidownload flash tool with files for sm-g975f u8 x32, x64,
https://drive.google.com/file/d/1GzgqNCCEE0e43CniitzuAxKcDax5QLaT/view?usp=sharing
link is restricted
Bro. Share file pls on your googledrive. We cantdownload it
Flar4eg said:
Bro. Share file pls on your googledrive. We cantdownload it
Click to expand...
Click to collapse
Excuse me, is that I uploaded the files to my google drive cloud and I detect a dll, or part of the flashtool as a virus, now I upload it again and put the link
https://mega.nz/file/eWRkiCwI#XP0yMOiBsfkUKIoxhKaZkLIgdhkwnEtiyVHqixMu8NI
multiuploader error: WinDNWApi.dll file could not be found.
Skyfall191299 said:
In some hex editor, create 4 files and extract from sboot.bin
0x3000 is BL1 name> bl1
0x3000 ... 0x17000 is epbl
0x17000 ... 0x68000 is BL2
0x7e000 ... 0x7eb000 + 0x190000 = 0x1fe000 sboot
Dram_training do not need to be cut, it is not used in flashing
0x244000 ... 0x1BD000 is el3mon dram
Click to expand...
Click to collapse
can anybody please explain how to make these files I have my Sboot.bin which was in the phone, I don't understand how to use hex editor. can some plz assist me, working on a750g. broke bootloader by flashing wrong firmware a750f after MDM bypass. software ver U1ARL3 for sboot
here is my sboot, can someone please create or show me how to create with hex https://drive.google.com/file/d/1CcEqe4MH__APK7H42aP3H2KGdqkAi-xx/view?usp=sharing
Skyfall191299 said:
https://mega.nz/file/eWRkiCwI#XP0yMOiBsfkUKIoxhKaZkLIgdhkwnEtiyVHqixMu8NI
Click to expand...
Click to collapse
getting error that el3mon_dram not found. can you help me?
Hello someone has the files ? The download link is inactive
The download link is inactive, please active or reupload please.
Skyfall191299 said:
First of all I want to thank @zogu without him, this guide would not be possible, This guide is for phones with Hard Brick, where the bootloader is destroyed and there are no tools that recognize the phone as odin
When you connect phones without a bootloader, Windows detects them as exynos9820 in device manager.
All of this is accomplished by trial / error method
I repaired my g975f and I have U3 and U8 files only for this model, but I will try to explain how to prepare files for any other model.
We have to use the same bootloader version that was previously on the phone, or if you're not sure, use the latest sboot.bin.
Plug in the phone and press and hold the power button.
Windows will detect the exynos9820 device, install the driver:
click manually,
com and lpt ports,
select the Driver Exynos USB Mode folder
Now we have to copy
WinDNWApi.dll
in:
C: \ Program Files \ Samsung \ Exynos USB Driver \ Drivers
There probably isn't this folder, just create it and copy the files.
Now we have to create the boot files.
Using lz4 1.9.2 we can unzip the sboot.bin.lz4 to sboot.bin and then be able to edit it, everything is explained in a guide inside the file
Download the last sboot.bin that was on your device
Now you have to extract the partitions from this file
In some hex editor, create 4 files and extract from sboot.bin
0x3000 is BL1 name> bl1
0x3000 ... 0x17000 is epbl
0x17000 ... 0x68000 is BL2
0x7e000 ... 0x7eb000 + 0x190000 = 0x1fe000 sboot
Dram_training do not need to be cut, it is not used in flashing
0x244000 ... 0x1BD000 is el3mon dram
Launch multiuploader.exe
Plug in the phone and press and hold the power button.
Search and find script.cfg
click start and the phone will go into odin mode.
Start odin and flash the firmware (in case of having split the stock rom sboot) or Combination (in case of having split the combination sboot)
the z-zip tool must be downloaded
Binary editor - Multidownload flash tool with files for sm-g975f u8 x32, x64,
https://drive.google.com/file/d/1GzgqNCCEE0e43CniitzuAxKcDax5QLaT/view?usp=sharing
Click to expand...
Click to collapse
good jod
im follwed to this instruction but all links not woriking
pla give me ur telegram or whtas app
and upload files to the new link plz
eldon301 said:
can anybody please explain how to make these files I have my Sboot.bin which was in the phone, I don't understand how to use hex editor. can some plz assist me, working on a750g. broke bootloader by flashing wrong firmware a750f after MDM bypass. software ver U1ARL3 for sboot
here is my sboot, can someone please create or show me how to create with hex https://drive.google.com/file/d/1CcEqe4MH__APK7H42aP3H2KGdqkAi-xx/view?usp=sharing
Click to expand...
Click to collapse
how to create with hex bro ?
links not woriking
link isn't working please fix
akbarshoxdedamirzayev said:
how to create with hex bro ?
Click to expand...
Click to collapse
Find the exact firmware that’s currently in the device, extract sboot from the firmware. You need to find correct location of bl1 bl2 el3 and others, names correspond to which is cut. You need 5 files from sboot. Am stuck on the forth file failing and I still don’t understand how to find them. What I did was follow others with exactly the same problem to see and understand how they got there’s and then tried it on my sboot. I am failing on part4 don’t even know how to make a cfg but from what I understand e for exynos and the number after so mine is e7885. Still not sure like I said
http://www.mediafire.com/file/sg5m2ti3k6a63z5/USB_Down_Load_32bit.zip/file download link
Skyfall191299 said:
First of all I want to thank @zogu without him, this guide would not be possible, This guide is for phones with Hard Brick, where the bootloader is destroyed and there are no tools that recognize the phone as odin
When you connect phones without a bootloader, Windows detects them as exynos9820 in device manager.
All of this is accomplished by trial / error method
I repaired my g975f and I have U3 and U8 files only for this model, but I will try to explain how to prepare files for any other model.
We have to use the same bootloader version that was previously on the phone, or if you're not sure, use the latest sboot.bin.
Plug in the phone and press and hold the power button.
Windows will detect the exynos9820 device, install the driver:
click manually,
com and lpt ports,
select the Driver Exynos USB Mode folder
Now we have to copy
WinDNWApi.dll
in:
C: \ Program Files \ Samsung \ Exynos USB Driver \ Drivers
There probably isn't this folder, just create it and copy the files.
Now we have to create the boot files.
Using lz4 1.9.2 we can unzip the sboot.bin.lz4 to sboot.bin and then be able to edit it, everything is explained in a guide inside the file
Download the last sboot.bin that was on your device
Now you have to extract the partitions from this file
In some hex editor, create 4 files and extract from sboot.bin
0x3000 is BL1 name> bl1
0x3000 ... 0x17000 is epbl
0x17000 ... 0x68000 is BL2
0x7e000 ... 0x7eb000 + 0x190000 = 0x1fe000 sboot
Dram_training do not need to be cut, it is not used in flashing
0x244000 ... 0x1BD000 is el3mon dram
Launch multiuploader.exe
Plug in the phone and press and hold the power button.
Search and find script.cfg
click start and the phone will go into odin mode.
Start odin and flash the firmware (in case of having split the stock rom sboot) or Combination (in case of having split the combination sboot)
the z-zip tool must be downloaded
Binary editor - Multidownload flash tool with files for sm-g975f u8 x32, x64,
https://drive.google.com/file/d/1GzgqNCCEE0e43CniitzuAxKcDax5QLaT/view?usp=sharing
Click to expand...
Click to collapse
Can you check the addresses and lenghts of the partitions cut out of sboot?
I think you've made a mistake.
Can give me the precise partition details?
Are you 100% positive that this is valid at least for most devices of the same chipset?
I'd like to try to make an automated script or a tool of some sort.
Also when I was dividing my A515F U5 sboot I've spotted some long breaks in data which I assumed were empty blocks at the end of partitions.
What confused me about it is that I didn't find those where you said partitions are ending.
Can you demonstrate graphically your partitions in a linear projection?
It’s been 3 years and still can’t get help with A750G hard brick. I guess XDA is not so friendly and helpful anymore.
The world is slowly dying. Peace to everyone who still cares
eldon301 said:
It’s been 3 years and still can’t get help with A750G hard brick. I guess XDA is not so friendly and helpful anymore.
The world is slowly dying. Peace to everyone who still cares
Click to expand...
Click to collapse
I'd like to help
NonStickAtom785 said:
I'd like to help
Click to expand...
Click to collapse
Hello my friend I am try to get life back into a A750G, it’s completely hard bricked showing exynos usb in device manager. Can i direct message you or should I keep it in the forums. I was falling on part 4 off the files needed to create, I didn’t even know if my cfg file was correct but I tried my best at understanding the creation of the files. Plz help my brothers