AIO for NB1
This is a joint project that gives the Nokia 8 on stock rom a new life
Check 3rd post for more info+updates
Update:The Last Update for Non-Treble version has been released with all bug fixes, Now I'll focus on Treble version of AIO. Non-Treble will no longer be updated.
Ultima Boot Image+Umbrella Mod Kernel for NB1[V11]
Works on all security patches for 00WW_5_XXX
- Using an older build with modifications and can't update? Flash this Firmware First!(Then get the latest update from OTA)(Flash this using NOST) Firmware Link
- Make sure to be on Build 00WW_5_XXX_XXXX before installing this!
Here's some of the stuffs that I've included:
1.TWRP
2.Magisk(After flashing boot image open Magisk manager and follow the prompts)
3.A nicely modified kernel including Energy Aware scheduling
4.Modifications for better support
5.Contains Many Bug fixes
Download link(s)
Non-Treble(Stock Rom)
Click to expand...
Click to collapse
How to install?
Using Phone:
TWRP Method:
TWRP>Install>Install Image>Select file>Flash boot>Flash>Reboot>Done
Flasher Method:
Flash using kernel managers that has flasher support
Using PC:
Put phone in download mode
[Old ADB Tools] ADB command: fastboot flash boot [Filename] > fastboot reboot > Done
[New ADB Tools] fastboot flash:raw boot [Filename] > fastboot reboot > Done
Click to expand...
Click to collapse
Ultima Script for NB1(Maximum efficiency)
Download link https://drive.google.com/folderview?id=1RHbV3b1qPjWT1kYOBxTRRpm5VxDjsc28
Add-on(Optional): https://drive.google.com/file/d/1ROWsE854_6MOg7y55j2qE5ZZaxvj8ISF/view?usp=drivesdk
!Make Sure to use the custom Kernel for best results!
What it'll do?
-Improve Battery and Performance
-Disable Useless services,Trackers to improve performance and battery(Add-on)
Click to expand...
Click to collapse
How to use?
Run this on terminal
su
sh /sdcard/[Path to the file]
Or,
In Kernel managers, Look for script manager and run it from there(you can also make it apply at boot)
Read this part!
To fix some apps crashing and idle drain problem after using the add-on script:
1. Install this app https://drive.google.com/file/d/1MqdH1lbBaCOK2pUEXbTR4LH71vJ7PQh6/view?usp=drivesdk
2. Enable "FirebaseInitProvider"
under the "Content provider" section of the app that's crashing.
3.Enable " Auto Block" and " Force Doze" in the settings if that app
NOTE: It can take from 1-10 minutes for Add-on depending on the amount of apps you have installed and run this only once
Click to expand...
Click to collapse
Recommended Kernel Manager: https://github.com/SmartPack/SmartPack-Kernel-Manager/releases
Update GPU drivers:
Vulkan: https://forum.xda-developers.com/nokia-8/development/update-vulkan-driver-to-1-1-128-t4090575
OpenGL: https://forum.xda-developers.com/nokia-8/development/pie-update-opengl-drivers-to-454-0-t4090699
Click to expand...
Click to collapse
Laxxed Thermal is currently being worked on It'll be uploaded under new thread
Join our telegram group for latest updates!
https://t.me/HMD_Nokia_8
Credits:
TWRP Team(For TWRP- https://twrp.me/)
TopJohnWu(For Magisk- https://github.com/topjohnwu/Magisk)
Radu-V(For custom Kernel- https://github.com/radu-v/umbrella-mod)
tytydraco(For ktweak, which was modified for NB1 by me- https://github.com/tytydraco/ktweak)
Click to expand...
Click to collapse
At last... someone did it.... although I can't call it a custom ROM, I can definitely enjoy the new kernel
I'll try it as soon as I can to give you feedback
Thx dude :good:
Stuffs Currently being worked on:
1.Laxxed Thermal
Version Changelogs For Ultimate Boot Image:
Release V1:
Initial release
Update V2, Changelog:
1.Hot-Plugging support [Experimental- May decrease performance when turned on]
2.Better Performance
3.Latest CAF tags
4.Latest Magisk Canary(works better)
Update V3, Changelog:
1.Removed Hot-Plugging support (Decreased performance, Might re-add later)
2."blu_schedutil" CPU governor added(Better Battery, I personally gained 1h30m of extra normal usage time)
3.GPU NAP State(Better Battery when GPU has low load/no load)
4."lzo-rle" z-ram compression algorithm(Upto 4.4 times more z-ram performance)
5.Force fast charge support(Fast charge enable/disable forcefully)
Update V4, Changelog:
1."pwrutilx" CPU governor added(For gamers)
2.Wireguard Support(New VPN protocol)
3.StuneBoost added
4.RTB Disabled for better performance
5.Removed unnecessary GPU codes(Should improve performance)
Update V5, Changelog:
1."CRC" Toggle[Disable to Gain Upto 30% extra performance]
2.Magisk Canary from 20425->20426
Update V6, Changelog:
1.Removed A LOT of unnecessary codes
2.(Attempt)to fix the heating issue
3.(Attempt)Battery Life improvements
4.Fully Reworked on EAS(Much better)
5.Led Notification Fixes(Using HW keys)
Update V7, Changelog:
1.Patches for CPU scheduler(Better battery)
2.Some patches for the random number generator(Improve performance on apps what require random numbers)
3.Fixes/Updates for CFQ(More up-to-date)
4.Fixes/Updates for Binder(More organized)
5.Removed dynamic stune(Useless, Worse performance+Battery)
6.Removed some logging(Unnecessary)
7.Removed A1N, PM1 and F11 code(More stability)
8.Magisk Canary Version 20426->21001
9.Attempt to fix Excessive battery drain and Heatups
Update V7.5, Changelog:
1."iowait_boost_enable" bug fixed
2.Excessive Battrey drain and Random Heatups Fixed(YAY ?)
Update V8, Changelog:
1."TTL" Fixation/Editing Support(Tethering Hack)
2.Disabled some logging(Better performance)
3.Removed POPP(Unnecessary)
4.Removed ssusb wakelock(Better Battery)
5.Scheduling improvements(Better tasking)
6."qseecom" updates
7.Battery life and performance improvements
Update V9, Changelog:
1.Fixed Random reboots
2.Updated Haptic Driver
3.TTL Changing Improvements
4.Silenced More Logs
5.Magisk Canary 21001->21004
Update V10, Changelog:
1.Fixed *Most* Bugs
2.Fixed Screen Off Audio Issues
3.Small Fixes Here and there
4.Magisk Canary 21004->21005
5.Small Adjustments for better Support
Update V11, Changelog:
1.Every Single bug has been fixed!(5ghz Hotspot too)
2.Magisk Canary 21005->Magisk Stable 20.4
3.Radical Changes
4.More bugs added to be fixed later(I'm Joking lol)
Update V12[Final(For real this time)], Changelog:
1. Based on the latest security patch
2. Full rework of EAS
3. Magisk Stable 20.4->Magisk Stable/Beta 21.1
This will be the last update since all bugs and nothing more to be added. However, I'll start working on Treble version soon!
Click to expand...
Click to collapse
Version Changelogs for Ultima Script:
Release V1: Initial release
Update V2: Disable unnecessary services(Add-on)
Update V3: Reduced Read Ahead for better Read/Write performance
Update V4: Reduced Read Ahead even more, Added extra tweaks, Latest version of Ktweak
Update V5: More power efficient
Click to expand...
Click to collapse
OneWayGamer said:
I'm working in Lineage OS. Can't tell when it'll be released tho
Click to expand...
Click to collapse
Can't wait for that one too :fingers-crossed::fingers-crossed:
Oh and I tried your image... works flawlessly... I'm liking Kcal so far... however I can't find a way to implement the kernel support for HW buttons as a notification led... Do you know any apps or mods that make use of it?
Ayhem-GH said:
Can't wait for that one too :fingers-crossed::fingers-crossed:
Oh and I tried your image... works flawlessly... I'm liking Kcal so far... however I can't find a way to implement the kernel support for HW buttons as a notification led... Do you know any apps or mods that make use of it?
Click to expand...
Click to collapse
The back button is working as a notification led.
Ayhem-GH said:
Can't wait for that one too :fingers-crossed::fingers-crossed:
Oh and I tried your image... works flawlessly... I'm liking Kcal so far... however I can't find a way to implement the kernel support for HW buttons as a notification led... Do you know any apps or mods that make use of it?
Click to expand...
Click to collapse
I use Light Flow Pro
Mod edit: Hyperlink to paid app removed!
XDA Forum Rules (please refer to rule no. 11)
Ayhem-GH said:
At last... someone did it.... although I can't call it a custom ROM, I can definitely enjoy the new kernel
I'll try it as soon as I can to give you feedback
Thx dude :good:
Click to expand...
Click to collapse
Check out the new update ?
Originally Posted by OneWayGamer
I'm working in Lineage OS. Can't tell when it'll be released tho
Click to expand...
Click to collapse
That is so cool, I guess it's sorta what all of us N8 users was wishing for, more or less. :good: to ya buddy!
Ayhem-GH said:
Can't wait for that one too :fingers-crossed::fingers-crossed:
Oh and I tried your image... works flawlessly... I'm liking Kcal so far... however I can't find a way to implement the kernel support for HW buttons as a notification led... Do you know any apps or mods that make use of it?
Originally Posted by OneWayGamer
The back button is working as a notification led.
Click to expand...
Click to collapse
I can't get that to work in Light Flow Lite, guess I'm not seeing it. Or it doesn't work in the app's test mode. (Edit, it seems to work with bk button when charging, so it might just work after all, we'll see. )
OneWayGamer said:
Check out the new update ?
Click to expand...
Click to collapse
Ohh so we have an update. Awesome. Good work!
iMaterial said:
That is so cool, I guess it's sorta what all of us N8 users was wishing for, more or less. :good: to ya buddy!
I can't get that to work in Light Flow Lite, guess I'm not seeing it. Or it doesn't work in the app's test mode. (Edit, it seems to work with bk button when charging, so it might just work after all, we'll see. )
Ohh so we have an update. Awesome. Good work!
Click to expand...
Click to collapse
Another Update is here! (Check 3rd post)
OneWayGamer said:
Another Update is here! (Check 3rd post)
Click to expand...
Click to collapse
:victory: :highfive:
This is awesome. Thanks Bro.
It works perfectly. ???
Finally things are starting to happen around here. I see the thread had a name change.:silly:
:highfive:
Hi buddy. I would if I could buy you a beer.
Q: how to control led notification? Both butrons stay ON when connected to charge. No other notificational behavior. Tried Light Flow. Searched SmartPack.
Q: I see random short freezes while working with phone, do you?
Less importantly:
Q: do you consider TWRP better than SHRP?
Q: Magisc... I had to install it again from magisc manager to make the kernel manager work.
I using v3 on sp03. Flashed by SHRP.
Arashone said:
Q: how to control led notification? Both butrons stay ON when connected to charge. No other notificational behavior. Tried Light Flow. Searched SmartPack.
Click to expand...
Click to collapse
In Light Flow you need to enable Root Mode under Device Settings and Root and under LED Control choose Control - Light Flow controls the LED (although it works for me with No Control with some limitations)
Arashone said:
Q: how to control led notification? Both butrons stay ON when connected to charge. No other notificational behavior. Tried Light Flow. Searched SmartPack.
Click to expand...
Click to collapse
A: On SmartPack Kernel manager, Look for "Device and Led" Option
Arashone said:
Q: I see random short freezes while working with phone, do you?
Click to expand...
Click to collapse
A: Get V4, Use "lzo-rle" Z-ram compression algorithm, Try "schedutil" and "blu_schedutil" CPU Governors. Should fix the random freezes[Although, Mine got significant performance boost(Check the attached screenshots in main post)]
Arashone said:
Q: do you consider TWRP better than SHRP?
Click to expand...
Click to collapse
A: Yes(For now, SHRP Has weird bugs)
Arashone said:
Q: Magisc... I had to install it again from magisc manager to make the kernel manager work.
Click to expand...
Click to collapse
A: That's Normal
OneWayGamer said:
A: On SmartPack Kernel manager, Look for "Device and Led" Option
A: Get V4, Use "lzo-rle" Z-ram compression algorithm, Try "schedutil" and "blu_schedutil" CPU Governors. Should fix the random freezes[Although, Mine got significant performance boost(Check the attached screenshots in main post)]
A: Yes(For now, SHRP Has weird bugs)
A: That's Normal
Click to expand...
Click to collapse
Great. This SmartPack thing, is quite a tool... Although under Display and LED, there is just a slider to turn everything off. Btw, that's cool. Should dig in more.
the option for overclock, does it (almost safely) work?
Arashone said:
Great. This SmartPack thing, is quite a tool... Although under Display and LED, there is just a slider to turn everything off. Btw, that's cool. Should dig in more.
the option for overclock, does it (almost safely) work?
Click to expand...
Click to collapse
What overclock are you talking about? It's already set to the highest value
Excellent work, although there are several details, the first is that the battery drains very quickly and heats up constantly only using light apps; with the last two kernel versions. Also, the UltimateScript script causes some applications to crash. The effort for the development of this device is appreciated
TlalocC said:
Excellent work, although there are several details, the first is that the battery drains very quickly and heats up constantly only using light apps; with the last two kernel versions. Also, the UltimateScript script causes some applications to crash. The effort for the development of this device is appreciated
Click to expand...
Click to collapse
We are looking into the battery drain problem. The heatups are expected, because cpu is always running at max frequency, though it shouldn't cause high drain. As for the apps crashing, install this https://drive.google.com/file/d/1MqdH1lbBaCOK2pUEXbTR4LH71vJ7PQh6/view?usp=drivesdk and enable "FirebaseInitProvider" under "Content provider" for the apps that are crashing. And to fix idle drain issue, simply turn on "Auto Block" and "Force Doze" in the settings of that app
OneWayGamer said:
We are looking into the battery drain problem. The heatups are expected, because cpu is always running at max frequency, though it shouldn't cause high drain. As for the apps crashing ....
Click to expand...
Click to collapse
I tried the app you recommend but it didn't work for me with some system apps like Google's, also when I rebooted I was stunned by the unlocked bootloader warning. Better opt to reset and not install the script to avoid that problem. Anyway good work
Related
Trickster MOD app is a tweaking tool to change various settings included in your kernel and other tweaks to your phone. It was made by me and my friend.
Screenshots and more information at links below.
Links
Google Play Store
AndroidPIT
Donate
WebsiteIf you like the app please rate it 5 stars and if you can, please donate.
Feature requests
Please post & vote features on our feedback site. So we can keep track of them
Bug Report
Please read the FAQ at our website before reporting any problem
If the FAQ does not help, use the Bug Report feature in our app & reference your ID here (the number in the mail subject).
Credits:
- Google
- Our great kernel devs
- grilledbacon for your beautiful icon
- Beta testers and translators for your contributions
- Anyone that helped us in some way
Disclaimer: This is provided with NO GUARANTY whatsoever. Use your common sense.
Reserved
I think I'll try it out on the weekend, cheers!
Good to see this finally here. I did some beta testing for you guys until my HOX had to go in for repair, finally just got it back and looking forward to using Trickster again
Thank you very much for this app..it is very handy and useful..
Testing it now
ShyamSasi said:
Testing it now
Click to expand...
Click to collapse
Is there any problem guy?
BTW, if you wanna join the private beta testing phase, please email us
thuanle said:
Is there any problem guy?
BTW, if you wanna join the private beta testing phase, please email us
Click to expand...
Click to collapse
Are you going to implement vibration intensity settings on this?
Please.
I will love you forever.
MemphisLeak said:
Are you going to implement vibration intensity settings on this?
Please.
I will love you forever.
Click to expand...
Click to collapse
That depends on whether there's kernel supporting this feature. Do you know of one?
I don't think it's possible to change vibration intensity on the HOX
bigeyes0x0 said:
That depends on whether there's kernel supporting this feature. Do you know of one?
Click to expand...
Click to collapse
Don't think I do. I assumed it was a feature on all kernels but was not configurable because of lack of demand. I distinctly remember going from sense rom to cm10 and noticing a large increase in vibration intensity from the capacitive buttons. I figured that since it is not configurable within android then it must be a feature within the kernel.
New version has been pushed to PlayStore. You're gonna receive the update soon.
Version 1.5.390 (20121029)
- Add ability set device hostname
- Add ability to backup/restore kernel modules in /system
- Add compression to kernel backups
- Add ability to force app language
- Add support all Qualcomm based GSIII
- Add ZRAM support
- Add Korean language
- Refresh app GUI if it's running when set-on-boot finishes
- Make the timeout longer so it's easier to attain root, especially at boot up (still have problem, use SuperSU)
- Fix all known bugs
Announcement:
- New version has been pushed to the market. Wait for the update.
- As the Set-on-boot delay feature has been quite stable, and to celebrate the 10k+ downloads of our apps :good:, this feature is enabled for all user. Hope you have more fun with TricksterMOD :victory:
Changelog of Version 1.6.423 (20121110)
- Set on boot delay is now enabled for all :highfive:
- Add Media Scanner Trigger
- Change working dialogs to persistent notification for better usability
- Optimize code & apk size
- Fix all known bugs
Can you help us spread the words? We don't use the Social network/FB much
Brilliant software
I'm trying this out now and it seems like a brilliant idea. I will provide any bug reports I encounter. Please revive this thread and carry on your work
ub3rx said:
I'm trying this out now and it seems like a brilliant idea. I will provide any bug reports I encounter. Please revive this thread and carry on your work
Click to expand...
Click to collapse
Yes, we are still on the way.
If you have any suggestion, poke us at http://trickstermod.uservoice.com/
Bug report: Does not save settings for reboot
I use cm10.1 b8 with xm kernel #167 and it does not restore any settings after reboot even if I choose it to do so. And yes...I donated.
Twist79 said:
I use cm10.1 b8 with xm kernel #167 and it does not restore any settings after reboot even if I choose it to do so. And yes...I donated.
Click to expand...
Click to collapse
Did you only apply the settings (top right corner) or did you also set on boot in menu? Applying the settings doesn't survive a reboot, only set on boot in menu does
It works perfectly for me on ViperX 3.3.7 with XM kernel #167.
Twist79 said:
I use cm10.1 b8 with xm kernel #167 and it does not restore any settings after reboot even if I choose it to do so. And yes...I donated.
Click to expand...
Click to collapse
Read the FAQ about set-on-boot.
https://trickstermod.uservoice.com/knowledgebase/articles/118579-faqs
If you still have problem, do a in-app bug report feature.
In your case, if you're still on Superuser then switch to SuperSU and try again, 95% set on boot problem can be fixed by doing this.
AW: [APP] Trickster MOD [Kernel Settings and Tweaks] [HOX Intl]
rkuijpers said:
Did you only apply the settings (top right corner) or did you also set on boot in menu? Applying the settings doesn't survive a reboot, only set on boot in menu does
It works perfectly for me on ViperX 3.3.7 with XM kernel #167.
Click to expand...
Click to collapse
Been there done that. Will try super su
Solved
I dont know if it was SuperSU or the last Update of Trickstermod but now it works and keeps the settings. Thanks!
Hi all.
Compatibility:
Builds from r1 up to r12 are for Android 7.1.1 Nougat OxygenOS based roms only.
Builds from r13 are for Android 8.0.0 Oreo OxygenOS based roms only.
Builds starting with r18 work with Android 8.1.0 Custom roms.
Builds starting with r28 up to r32 work with OxygenOS 5.1.0 Android 8.1.0
Builds starting with r33 work with OxygenOS 5.1.5 Android 8.1.0
Builds starting with r40 are for OxygenOS 9.0 Android Pie.
Builds starting with r44 are also available for custom roms such as LineageOS.
Download:
https://francokernel.app
Installation:
Flash the zip in your recovery
or
Auto-flash from FK Kernel Manager app, it's magical
Changelog:
https://francokernel.app
Scroll down, choose your device & select the latest release to see the changelog.
Source:
https://github.com/franciscofranco/OP5-5T-unified
Follow me on socials for updates and interesting tidbits
Twitter[/URL
FK Kernel Manager video
[url]https://www.youtube.com/watch?v=ARdNqh71D0E
Disclaimer to moderators:
Slight OT is fine, but when users decide to act stupid they should be dealt with with the appropriate means - its really annoying for me when OT turns crazy. Please put the warning/ban hammer anytime any of you think there's lack of respect and/or too much unwanted OT crap - but if it doesn't meet this criteria let the OT posts alone. Thank you.
Cheers!
Wow nice! For OOS?
As usual there's a large focus on battery life. F2FS is upstreamed to the latest version and I spent a couple days single picking useful commits from Qualcomm's repository with fixes and power consumption improvements.
You should see an improvement in battery life.
Beukhof1 said:
Wow nice! For OOS?
Click to expand...
Click to collapse
Yes.
wowww Franco is here!
25% off sale on FK Manager & Updater for the next 48 hours to celebrate adding One Plus 5 support
https://play.google.com/store/apps/details?id=com.franco.kernel
I'm wait this moment. Thanks FF!
@franciscofranco The king is here!!!!Tnx buddy!!
can it be flash over another custom kernel?
Thank you for supporting Oneplus 5! Using now and it's very smooth.
Just want to report also that the stock screen gestures (double tap to wake, draw O for camera etc) are not working yet
lohaanaa said:
can it be flash over another custom kernel?
Click to expand...
Click to collapse
Nope....first stock kernel...after custom one....
Great work Franco!
After a reboot, the phone boots to default color calibration and it takes like 10-20 seconds to switch to DCI-P3 or SRGB.
PS:Gestures are broken too.
The kernel is systemless?
Sent from ONEPLUS A5000 by Tapatalk
v7 said:
After a reboot, the phone boots to default color calibration and it takes like 10-20 seconds to switch to DCI-P3 or SRGB.
PS:Gestures are broken too.
Click to expand...
Click to collapse
Color calibration did not reset for me. Working fine. But Gestures don't work when screen is off.
I don't see the discount price for the Manager & Updater in the PlayStore.
Edit: price already updated in the store
@franciscofranco
fsync seems to be causing issues for me. With fsync disabled some apps fc after being cleared and some other work fine. After reenableing fsync everything returns to normal.
I´am running the latest stock rom with the only modificatiion being your kernel and magisk.
here is a short vid. of it in action: https://gfycat.com/MemorableMemorableCaecilian
logcat (sorry its quite huge ) https://www.dropbox.com/s/w2rbudldqw3ofvr/log.txt?dl=0
AlfalfaX said:
fsync seems to be causing issues for me. With fsync disabled some apps fc after being cleared and some other work fine. After reenableing fsync everything returns to normal.
I´am running the latest stock rom with the only modificatiion being your kernel and magisk.
here is a short vid. of it in action: https://gfycat.com/MemorableMemorableCaecilian
Click to expand...
Click to collapse
Grab a logcat.
Nice, I missed you (used Franco on my 3T). Already have the app, but nice for new users with discount :highfive:
Nice thanks
lohaanaa said:
can it be flash over another custom kernel?
Click to expand...
Click to collapse
Flash full zip. Let it boot. Boot back too twrp then flash kernel
Hi guys, I've been working on these for a long time and now finally managed to find best configuration and fix all bugs.
I edited one by one and, after months of hard work, this got where is now
-Battery
-Balanced
-Performance
They do what their name suggest
They tweak:
-Cpu Interactive tweaks(modded by me)
-Battery one will use lowest voltage frequencies
-sysctl
-disable Zram on Battery
-Entropy
-Gpu
-Thermal configs
-sysconfig tweaks(to save battery on deepsleep)
-I/O
-and some in-build configs to kernel
HOW TO INSTALL:
-Make sure you have Magisk v15+ installed
HOW TO UNINSTALL:
-Go into magisk app, click on Modules. Then uncheck F.u.c.king-Tweaks module and click on trash icon. Reboot
Download Link:
https://androidfilehost.com/?w=files&flid=264755
If u want to suggest something or have a question, ask me on Telegram (@Characteress)
Works for Zui ? . .
vladimir.jz said:
Works for Zui ? . .
Click to expand...
Click to collapse
Yup. BTW, this build for battery have deepsleep issues. I'm testing a fix for it already.
Balanced and Performance are working great already.
Links updated !
Hey guys! Finally FINAL Version for all of them!!!
Thanks for everyone that tested and helped me doing this tweak.
You can use on all ROMs for Zuk (should work on all SD820 devices but need test)
Issues fixed:
-Deepsleep(was the only bug left btw)
Added thermal mods to all of them, Sun-Cooling to Battery and Balanced one, and Tweaked FSC-Thermal for Performance.
PS: FSC-Thermal is a thermal mod created by Korom42 for Xperia XZ. I ported it and edited some lines(changed sensor too).
LINKS ARE ON FIRST POST(Thread topic message)
hi all,
anyone compare this tweaks vs helix-engine? which one better?
by using this tweaks , i assume whatever rom we are using right now, will have same result for benchmark and battery backup?
Would this also force Doze on Google Play Service? Im using sysconfig patcher on magisk rn and it might conflict with this, so I wanna make sure I can remove that without any downside
This tweak is better
locolyric said:
hi all,
anyone compare this tweaks vs helix-engine? which one better?
by using this tweaks , i assume whatever rom we are using right now, will have same result for benchmark and battery backup?
Click to expand...
Click to collapse
This tweak is better than Helix engine i personally tested both of them and compared this tweak is better and I am using bootlegger rom with stock bfrv3 kernel
---------- Post added at 01:53 AM ---------- Previous post was at 01:50 AM ----------
pipyakas said:
Would this also force Doze on Google Play Service? Im using sysconfig patcher on magisk rn and it might conflict with this, so I wanna make sure I can remove that without any downside
Click to expand...
Click to collapse
I don't think this tweak will force doze on play service you can remove sysconfig patcher and instal enable doze for gms
Magisk module i am using both modules with no problem
New update is up!
Hi guys, if you follow my projects you know that Sun-Cooling has been updated to v2.2 so I updated Battery and Balanced too.
Performance tweak doesn't need to be updated anymore, as reached it's maximum(maybe I update and spend some more time on it when I have time)
Changelog:
-Changed frequency table on both(they should be more smooth now)
-Added Sun-Cooling v2.2 on both
Download Link:
https://androidfilehost.com/?w=files&flid=264755
Deleted
satyen_ said:
Deleted
Click to expand...
Click to collapse
Access denied fixed. Sorry for the incovenience
Hi, quick question, How's this different from the Sun-cooling mod that you have? Because this seems to have all of the features in that plus some more. Which one do I choose?
kishore1998 said:
Hi, quick question, How's this different from the Sun-cooling mod that you have? Because this seems to have all of the features in that plus some more. Which one do I choose?
Click to expand...
Click to collapse
Hi. So, this tweak is supposed to change a lot of things, I just decided to add Sun-Cooling on it too. In case you want tweak the whole system, flash this. If u want stock configs but only thermal mod, flash Sun-Cooling.
characteres said:
Hi. So, this tweak is supposed to change a lot of things, I just decided to add Sun-Cooling on it too. In case you want tweak the whole system, flash this. If u want stock configs but only thermal mod, flash Sun-Cooling.
Click to expand...
Click to collapse
Awesome. Thanks for letting me know.
characteres said:
Hi. So, this tweak is supposed to change a lot of things, I just decided to add Sun-Cooling on it too. In case you want tweak the whole system, flash this. If u want stock configs but only thermal mod, flash Sun-Cooling.
Click to expand...
Click to collapse
Buddy i have flashed sun cooling
Want to flash this battety mod
If i flash does the overrite sun cooling
And i f i remove this mod does sun cooling which i flashed easier also be gone ??!!
I tested these and these tweaks are effective. But i can't keep them installed as of now as i have to switch between modes frequently and flashing everytime is not an option for me.
characteres said:
Hi guys, if you follow my projects you know that Sun-Cooling has been updated to v2.2 so I updated Battery and Balanced too.
Performance tweak doesn't need to be updated anymore, as reached it's maximum(maybe I update and spend some more time on it when I have time)
Changelog:
-Changed frequency table on both(they should be more smooth now)
-Added Sun-Cooling v2.2 on both
Download Link:
https://androidfilehost.com/?w=files&flid=264755
Click to expand...
Click to collapse
Is your this tweak and sun-cooling tweak are different
kashyapp said:
Buddy i have flashed sun cooling
Want to flash this battety mod
If i flash does the overrite sun cooling
And i f i remove this mod does sun cooling which i flashed easier also be gone ??!!
Click to expand...
Click to collapse
it does overwrite automatically. If u remove this mod, sun-cooling is also gone, so u need to reflash Sun-Cooling.
aslam2121 said:
Is your this tweak and sun-cooling tweak are different
Click to expand...
Click to collapse
Yes, both are mine. Sun-Cooling and F.u.c.king-Tweaks are different. F.u.c.king-Tweaks does a lot of changes(and I've included Sun-Cooling inside it too). Sun-Cooling only changes Thermal configs.
Does this mod work along with AKT or have to install it alone?
characteres said:
Yes, both are mine. Sun-Cooling and F.u.c.king-Tweaks are different. F.u.c.king-Tweaks does a lot of changes(and I've included Sun-Cooling inside it too). Sun-Cooling only changes Thermal configs.
Click to expand...
Click to collapse
Your tweak does cool down my device and battery performance is also lot improved thanks for this wonderful work.
Code:
*** Disclamer
Please behave responsibly and avoid thermonuclear war. I am
not responsible for any bricked devices, etc.
Introduction
This is Zest Kernel. It's an optimized kernel for our device which includes a few nifty features. Built, on every security update, you'll have the best of the best. Features will be listed below and shared, to the most of my ability, across all my supported devices. This isn't just my kernel it's yours too - request any features you like and I'll try to add them in. However, I'm also busy with studies so please don't ask for dumb stuff.
Click to expand...
Click to collapse
Images
Possibly the fastest [clean] ROM for our device, benchmarks coming soon .
Click to expand...
Click to collapse
Features
Google's exclusive features for Pixel devices (except Music Ticker and Call Screening)
Lawnchair launcher
Spoofed stock device to pass SN
Widevine L3
Faster encryption device-wide
Daydream VR
Fast, optimised Zest Kernel
EAS
Markup screenshot editing
Google Sound Picker
Google Wallpapers
Digital Wellbeing
Optimised GPU rendering for Pie
Custom Clang and GCC toolchains for building - optimised LLVM with PGO, and GCC 9.1
OpenGApps pico included
GCam HDR+ support
Click to expand...
Click to collapse
Installation instructions
* Go download https://developer.sony.com/file/download/software-binaries-for-aosp-pie-android-9-0-kernel-4-9-yoshino.
* Unzip the download to get an .img file.
* Install fastboot (drivers for this can be gotten from Google directly), drivers for flashmode for Windows can be gotten from newflasher.
* Enter your command prompt or terminal whatever and fastboot flash oem THEFILEYOUEXTRACTED.img.
* Find a decent TWRP and flash it.
* Download the ROM for your device. They are all in this folder https://jenkins.cosmic-os.org/job/zfsodp-core/ws/lastbuild so click the one for your codename (eg. G8141 is single sim maple and G8142 is dual sim maple).
* Flash it in TWRP and wipe internal storage and format data (the option that has red text and makes you type yes).
* Enjoy!
Click to expand...
Click to collapse
Download
Latest is on my Jenkins job.
Click to expand...
Click to collapse
FAQ
PM me in XDA's Sony group.
Click to expand...
Click to collapse
Special Thanks To
Code:
* @kholk for his kernel advise
* @Sultanxda for his kernel advise
* @deletescape for Lawnchair
XDA:DevDB Information
Zest-flavoured SODP, ROM for the Sony Xperia XZ Premium
Contributors
LazerL0rd, The entire SODP team
Source Code: https://github.com/ZfSODP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Sony OSS OEM binaries
Based On: SODP
Version Information
Status: Beta
Beta Release Date: 2019-07-06
Created 2019-07-06
Last Updated 2019-08-10
Reserved
Reserved
nice, try tonight:good:
----------------------------------------------------------------------------------------------
HAVE BEEN DELETED, I don't know what happen, his own website and his kernel is also deleted.
I have the same as the #5, but a bit different, there were 4 identical page on the screen, such like 4 1080p in a 4k screen, I think the 120HZ 1080p display driver is the reason.
I was on latest stock when flashing (following every step), when it boots and show the sony logo, it gets distorted (characters in the top and middle) and then reboots. I've reflashed stock, wiped everything including system, tried older twrp, and even flashed the G8142 image on my G8141, but i keep getting the distorted sony logo followed by a reboot. Is there anything else i have to do?
I had this issue before with AOSP but i never figured out how to fix it.
G8141, unlocked bootloader, .80 stock, twrp 3.3.1.0 and 3.2.3.0
del
Can I flash the kernel through twrp, then flash the zip?
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Psychoticism said:
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Click to expand...
Click to collapse
Give it a week or so mate, lazerl0rd is studying/having exams for a while.
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Any screenshot of the performance?
It was stopped at the android logo, it ran all night and did not enter the system. please help me!
still on logo android !/
Sjll said:
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Click to expand...
Click to collapse
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Laplacetor said:
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Click to expand...
Click to collapse
EAS is not stable on SODP. GPU of MSM8998 is hard to afford 120Hz.
Smooth, fast(20sec boot time including 5 second bootloader unlocked nag!) and clean rom thanks a lot! Sadly not going to be my daily driver because lack of features, and my device overheats sadly because of 120hz. Also it takes me 3 reboots to get into recovery any idea why?
Advices:
Get rid of pre installed google, allow users to install separately.
JamesDSP should be stabilized, I just get FC all time can't get it to work. (Would be better to just remove as well and allow user to install separately)
Default DPI is too low, should be 420 for ease of use.
Sony camera should be added, as in Sjll's LineageOS. ***
Ancient app logos (kitkat calendar calculator etc) should be updated.
Device-wide dark mode which includes Phone, Calendar, Settings and Files should be made. **
Phone application should be de-google-ified, Spam filter inside just feeds Google with private call data. ***
Option to switch resolution and frame rate on the go.
Heyo, wondering if you can add a quick and dirty CIFS kernel module. There are some universal versions floating around online.
Signing them is above my skill level. I don't know if the signing process has to be implemented on a device by device level. If that is an impediment, maybe consider removing the requirement for kernel modules to be signed in the first place? I don't know, I'm no expert.
Just a PSA. Someone got rclone mounts working via Magisk. Can be found in repo. Sadly, no support for cifs or nfs. But webDav works. The largest downside is that the mounts can't be mounted directly onto sdcard. Something the cifs kernel module did no problem. With rclone you'll need an app with root browsing capability. Or at least full access to /storage.
UPDATE: The rclone Magisk version has been updated to support direct sdcard mounts! Yay! So, there isn't really a need for a cifs module.
However, I'm certain the performance will be better with a cifs module. So, it's not necessary, but could be a cool benefit if added.
Thanks for all the work! It doesn't go unnoticed.
i hope you add other version special 90hz because 120hz make my device overheats and thank you
Moarten said:
I was on latest stock when flashing (following every step), when it boots and show the sony logo, it gets distorted (characters in the top and middle) and then reboots. I've reflashed stock, wiped everything including system, tried older twrp, and even flashed the G8142 image on my G8141, but i keep getting the distorted sony logo followed by a reboot. Is there anything else i have to do?
I had this issue before with AOSP but i never figured out how to fix it.
G8141, unlocked bootloader, .80 stock, twrp 3.3.1.0 and 3.2.3.0
Click to expand...
Click to collapse
Try again, a few of the previous builds were bootlooping, I'll try update instructions too.
Laplacetor said:
nice, try tonight:good:
----------------------------------------------------------------------------------------------
HAVE BEEN DELETED, I don't know what happen, his own website and his kernel is also deleted.
I have the same as the #5, but a bit different, there were 4 identical page on the screen, such like 4 1080p in a 4k screen, I think the 120HZ 1080p display driver is the reason.
Click to expand...
Click to collapse
Psychoticism said:
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Click to expand...
Click to collapse
Try again, a few of the previous builds were bootlooping, I'll try update instructions too. ROM isn't on my website and never was .
wolfmanstr said:
Can I flash the kernel through twrp, then flash the zip?
Click to expand...
Click to collapse
Don't use my stock kernel with this.
Sjll said:
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Click to expand...
Click to collapse
It performs better, battery is decent now (after a load of changes). We now (as of today) have a Power HAL (libperfmgr) which supports DT2W on supported devices too. I may or may not update it to version 1.3.
SilverGamer_YT said:
Any screenshot of the performance?
Click to expand...
Click to collapse
No, it's EAS and you could test it out.
tronganhha29 said:
It was stopped at the android logo, it ran all night and did not enter the system. please help me!
Click to expand...
Click to collapse
Yeah, I fixed that a while ago - try again please.
CRNO said:
still on logo android !/
Click to expand...
Click to collapse
Yeah, I fixed that a while ago - try again please.
Laplacetor said:
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get lag" and like our phone can handle it on UI, at least. The worst case is battery but IIRC it wasn't too different from 60Hz. Anyways it's 90Hz now.
Sjll said:
EAS is not stable on SODP. GPU of MSM8998 is hard to afford 120Hz.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get lag" and like our phone can handle it on UI, at least. The worst case is battery but IIRC it wasn't too different from 60Hz. Anyways it's 90Hz now. EAS seems stable, here. The bugs we have aren't really EAS related.
undefine said:
Smooth, fast(20sec boot time including 5 second bootloader unlocked nag!) and clean rom thanks a lot! Sadly not going to be my daily driver because lack of features, and my device overheats sadly because of 120hz. Also it takes me 3 reboots to get into recovery any idea why?
Advices:
Get rid of pre installed google, allow users to install separately.
JamesDSP should be stabilized, I just get FC all time can't get it to work. (Would be better to just remove as well and allow user to install separately)
Default DPI is too low, should be 420 for ease of use.
Sony camera should be added, as in Sjll's LineageOS. ***
Ancient app logos (kitkat calendar calculator etc) should be updated.
Device-wide dark mode which includes Phone, Calendar, Settings and Files should be made. **
Phone application should be de-google-ified, Spam filter inside just feeds Google with private call data. ***
Option to switch resolution and frame rate on the go.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get overheat" and like our phone can handle it on UI, at least. I changed up the thermal driver so it should be good now. Btw those thermal modules in Magisk won't change a thing as I use sultan's thermal framework now - not RQBalance stuff. DPI has an option on setup under "vision", choose what you like. I added GCam instead, it's gonna be better quality than Sony's crappy cam app. Ancient app logos aren't gonna be updated, these are ASOP packages - instead I'm replacing them with Google packages. Also I made everything Squircle shaped too. Device-wide dark mode will be coming soon, needs some kanging [with original authorship] from Q. Phone application should be de-google-ified -> you can turn off the spam filter and install any Dialer you want. I'm not dealing with darkening AOSP's package so that's why I'm using Googles. Google can get your data if Play Services is installed anyways. Option to switch resolution and frame rate on the go -> idk why SODP removed that.
Astoras said:
Heyo, wondering if you can add a quick and dirty CIFS kernel module. There are some universal versions floating around online.
Signing them is above my skill level. I don't know if the signing process has to be implemented on a device by device level. If that is an impediment, maybe consider removing the requirement for kernel modules to be signed in the first place? I don't know, I'm no expert.
Just a PSA. Someone got rclone mounts working via Magisk. Can be found in repo. Sadly, no support for cifs or nfs. But webDav works. The largest downside is that the mounts can't be mounted directly onto sdcard. Something the cifs kernel module did no problem. With rclone you'll need an app with root browsing capability. Or at least full access to /storage.
UPDATE: The rclone Magisk version has been updated to support direct sdcard mounts! Yay! So, there isn't really a need for a cifs module.
However, I'm certain the performance will be better with a cifs module. So, it's not necessary, but could be a cool benefit if added.
Thanks for all the work! It doesn't go unnoticed.
Click to expand...
Click to collapse
For Android kernels, you can't just chuck a module in. But I'll add it to the kernel config for ya.
CRNO said:
i hope you add other version special 90hz because 120hz make my device overheats and thank you
Click to expand...
Click to collapse
Already done. And - "I don't get all this 120Hz issue, it's not as simple as "set 120Hz get overheat" and like our phone can handle it on UI, at least."
What is LightningZap! kernel?
It is a lightweight, yet heavily tweaked and optimized kernel geared towards balancing performance and battery life.
Please read this ENTIRE post before downloading and flashing LightningZap! kernel.
Disclaimer: As with all custom kernels, you flash at your own risk. Always make a backup! I nor the associates of LightningZap! kernel, Teamfahq, or the testers group cannot and will not take responsibility for YOUR actions. I cannot always control what works and doesn't work with ROMs other than my own. If there is a bug, feel free to report it with logs, but note that the problem may be due to a conflict with coding int the ROM. If said condition exists, please discuss the concern with said ROM developer. If a bug condition does exist within the kernel and there is a known fix for said bug, please don't hesistate to link me to that fix. Make sure to give credit, thanks, and maybe even a cup of coffee to your developers. If you have a feature request, please feel free to share it as well.
Features:
Based off ElementalX kernel by flar
blue_schedul governor from blue_spark kernel thanks to eng.st
Ondemand gov Optimized for better performance while maintaining battery life
FIOPS ioscheduler by default (suggest leavving it that way)
My insane readahead tweak **** In HDK-Mod kernel manager, it reports "Not in range." This is normal DO NOT adjust. My tweaks optimizes readahead per demand usage.****
LZ4 compression
O3 Optimizations
zram
lz-sysctl tweaks
Sound control (speaker, earpiece and mic)
Backlight min setting
Adjust or disable vibration
Advanced Color Control and K-Lapse
Block wakelocks
NTFS r/w, CIFS and NFS support
WireGuard support
Option to disable fsync
Pass SafetyNet
LightningZap! kernel will work on oneplus 6 and oneplus 6T on stock OOs and most custom roms. There are 2 versions, PIE and NDP.
Diferences
PIE was built for custom roms
STOCK was modified for stock OOS (Does not include commits to fix fps that custom roms need)
NDP was slightly modified for SkyDragonOs by removing wake gestures. Wake gestures are natviely written into SkyDragonOs (and maybe more roms).
I have not tested all roms to see what works and what doesn't. So, I would suggest trying PIE first. If wake gestures (like dt2w) do not work, try NDP. Feel free to report what rom and LightningZap! kernel version you are using.
Bug reporting is HIGHLY encouraged, but please accompany your reports with logs. I cannot do much to fix things without them. Pruning of the logs is deeply appreciated as well.
I feel that if you are here, you already know how to flash a custom kernel. If not, close this page and do some research about it first. This will not erase recovery or root when flashing. But, I would like to quote @eng.stk
Warning: If you come from other kernel or have any issues, you should dirty flash your ROM before flashing LightningZap! zip to avoid problems.
Reflash ROM -> if you want root flash SuperSU or Magisk (default, no plugins/modules) -> flash LightningZap!.
If you are already rooted or upgrading between LightningZap! versions, just flash the kernel zip. Also uninstall or clean data of any kernel control app you're using.
Click to expand...
Click to collapse
Download links:
LightningZap! kernel PIE- Updated 10-07-2019
LightningZap! kernel NDP
LightningZap!-kernel-STOCK
Changelog
XDAevDB Information
LightningZap! kernel for OnePlus 6/6T
Special thanks to:
flar, eng.stk, HolyAngel Kernel Source: OnePlus6T-LZ
Version Information
Status: Stable
Current Stable Version: 2.3
Stable Release Date: 10-05-2019
ROM tracker
Here I will post what version of LightningZap! kernel works with what ROMs. As well as any noted bugs with said rom.
PIE
Most custom roms
NDP
SkyDragonOs
Stock
Stock OOS
It sounds very interesting! But a doubt that not before the SkyDragon rom was running the HolyDragon kernel? This would be the evolution of that kernel?
It sounds very promising! As soon as possible I will try it!
Thank you man!!
thomas.raines said:
Here I will post what version of LightningZap! kernel works with what ROMs. As well as any noted bugs with said rom.
PIE
Stock OOS
NDP
SkyDragonOs
Click to expand...
Click to collapse
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Ryano89 said:
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Click to expand...
Click to collapse
Isnt working for me either
fosgate24360 said:
Isnt working for me either
Click to expand...
Click to collapse
Yeah, I tried to reregister my FP but it won't let me.
Ryano89 said:
Yeah, I tried to reregister my FP but it won't let me.
Click to expand...
Click to collapse
It's not going to work on OOS as he's got the FOD hacks required for functional fingerprint on custom ROMs. Doing this breaks fingerprint on OOS, and removing them will break it on custom ROMs. The only way to accommodate both currently is with two separate kernel variants.
Great work Thomas
Riddle5 said:
It sounds very interesting! But a doubt that not before the SkyDragon rom was running the HolyDragon kernel? This would be the evolution of that kernel?
Click to expand...
Click to collapse
Completely different kernel from HolyDragons.
Ryano89 said:
Thank you so much. Do you recommend sticking with schedutil, which is default I believe, or do you prefer Onedemand or Blu instead? Thanks again for the kernel, I'm checking it out now.
---------- Post added at 04:18 PM ---------- Previous post was at 04:14 PM ----------
Everything seems great so far except one thing. Has anyone else noticed that their fingerprint sensor stopped working on OOS stable? Or could this just be a coincidence for me?
Click to expand...
Click to collapse
For governor, use whatever fits your needs the most. I recommend trying all 3 to see which on egives you the most performance and battery life.
return.of.octobot said:
It's not going to work on OOS as he's got the FOD hacks required for functional fingerprint on custom ROMs. Doing this breaks fingerprint on OOS, and removing them will break it on custom ROMs. The only way to accommodate both currently is with two separate kernel variants.
Click to expand...
Click to collapse
Yep... Accidentally merged those commits to the PIE branch. Running new build now. oops...
PIE branch updated. Fingerprint should be fixed now.
The New Update Is Buttery Smooth Bro Great Work Fp Works Better Than Stock Oos the only thing is the gaming performance has came down can experiencing shutter lags, and fps drops any fixes over that rest is just amazing bro .
Dhairya said:
The New Update Is Buttery Smooth Bro Great Work Fp Works Better Than Stock Oos the only thing is the gaming performance has came down can experiencing shutter lags, and fps drops any fixes over that rest is just amazing bro .
Click to expand...
Click to collapse
With your favorite kernel manager app, try using ondemand governor and lowering the up_threshold value adjust the sampling rate.
Using 3D benchmark app with Sling Shot Exteme setting up_threshold at 70 (default value) OpenGL ES 3.1 scored 4632 and Vulkan came in at 4272
Dropping it to 15 (lowest possible value)
OpenGL ES 3.1 scored 4857 and Vulkan came in at 4456
Setting it to 90
OpenGL ES 3.1 scored 4337 and Vulkan came in at 4068
These are overall scores and only an example. Results may very per device.
You can also try raising the sampling_rate as well. But I think the default value is best.
Be aware when adjusting these values, your perfomance vs battery life is effected.
lower up_threshuold will increase performance and decrease battery life whereas higher up_threshold decreases performance but raises battery life. Adjusting these values too high/low can cause the device to become unstable or overheat. Make your adjustments in small increments and if you notice a significant lag or your device is starting to get too hot, you can change them back and avoid complete device failure.
And by battery life, I mean the discharge rate, not the length of time until your battery takes a poop and you have to replace it or your phone.
New download link for pie branch. New branch added STOCK.
So, as pointed out by return.of.octobot , the PIE branch fp worked but became broken after reverting the commit for fp on custom roms. So, I made a new branch for OOS only and the PIE branch is for custom ROMs.
Tried flashing this stock version kernel on OOS 9.0.17 via FK manager app and got the abort message with error as unsupported device. Please see attached screenshot and let me know if there is something I need to change.
deepu458 said:
Tried flashing this stock version kernel on OOS 9.0.17 via FK manager app and got the abort message with error as unsupported device. Please see attached screenshot and let me know if there is something I need to change.
Click to expand...
Click to collapse
Flash in recovery. Since this is not a franko kernel, the franko kernel app won't work...
thomas.raines said:
Flash in recovery. Since this is not a franko kernel, the franko kernel app won't work...
Click to expand...
Click to collapse
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
James Blode said:
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
Click to expand...
Click to collapse
The thread title says it all...OOS9/ Pie.
James Blode said:
Hello dear dev, is it working on 10.3.0 OOS for OP 6?cause the latest build is from October 2019...
Click to expand...
Click to collapse
The current released and stable version is for android 9.0/pie.
Thre android 10 version is still in testing.
thomas.raines said:
The current released and stable version is for android 9.0/pie.
Thre android 10 version is still in testing.
Click to expand...
Click to collapse
Thanks for letting me know...ill wait for this great kernel...