Hi!
I want to install [ROM][7.1] RESURRECTION REMIX N [5.8.0][BJRR][OxygenCam] 29.11.16.
I understand how to go to bootload, recovery, use adb, fastboot etc.
I just lack of some practice.
My question is, in which order install/flash everything?
It's written
INSTALLATION INSTRUCTIONS
- Download the latest build
- Download Gapps
- Take a nandroid backup
- Recommended - Full wipe and factory reset
- Flash ROM using latest Recovery
- Flash Gapps
- Reboot.
- Enjoy!
Installation Files
1.) Required twrp
2) Required Firmware & Modem 3.5.5-CE
3.) rom
4.) Open Gapps
Click to expand...
Click to collapse
I don't know which firmware/modem I'm using since I installed TWRP, OxygenOS Open Beta 8 (Nougat), then messed up and returned to 3.2.6 with original recovery etc.
I'll unlock the bootloader again, install TWRP in order to flash the ROM, Gapps and firmware/modem (just in case I guess).
But, at which step I should flash firmware/modem? After flashing rom and before gapps or at some other point?
Thanks a lot for your help!
(Oh, and I sure hope I'm in the right section of the forum!)
Hi, guys!
What is the current GSI installation guide for mi 6?
I have:
latest OrangeFox Recovery
rom - https://forum.xda-developers.com/mi-6/development/rom-pixel-experience-t3892351
I can't install GSI
My phone is always loaded into fastboot after installing system.img
I tried to install using adb
I almost succeeded, but the download hangs on the rom boot animation
I tried bliss rom pie on realme2pro.Here is some screenshot link-
https://imgur.com/rBKNRQQ
https://imgur.com/Q7g68mR
https://imgur.com/bEKYvS8
https://imgur.com/nDkrhiH
https://imgur.com/mddj5yk
https://imgur.com/xfN23Yp
Anyone tried yet?please try and let me know is it suitable for our realme2pro or not.
bliss rom gsi pie arm64 a only
link- https://www.xda-developers.com/bliss-roms-android-pie-gsi-project-treble-release/
it booted fine
Is fp working in this and the gcam??
No brother,fp not working
I tried A only using TWRP (latest version), but it just hangs at the realme logo then reboots back to recovery.
Note: even though I flashed the img to the system partition it complained no OS was installed.
Prior to that I had done a factory wipe and then a system wipe.
https://forum.xda-developers.com/pr.../rom-blissroms-9-0-official-4-4-2019-t3918303
11.7 A-Only Build with Gapps built in
11.8 A-Only Build Stock (without Gapps)
Both versions failed!
Many a times brother due to vendoe problem this loop happens. When this loop happens try to boot to recovery and flash vendor.img and you will be able to boot to rom
Step For Flashing-
1.latest twrp or r2x2 recovery
2.then backup
3.wipe system,vendor.userdata,cache,delvik cache for clean install
4.flash vendor zip first link- https://androidfilehost.com/?fid=1395089523397931146
5.unpack sytem image flash to system link- https://androidfilehost.com/?fid=1395089523397933944
6.wipe cache and delvik cache
7.Swipe to reboot
8.wait for few minutes it booted to bliss rom
caution-
latest system color os a.17 build vendor not worked
flash only linked vendor zip from above
then you good to go
best of luck
galibalmasanick said:
Step For Flashing-
1.latest twrp or r2x2 recovery
2.then backup
3.wipe system,vendor.userdata,cache,delvik cache for clean install
4.flash vendor zip first link- https://androidfilehost.com/?fid=1395089523397931146
5.unpack sytem image flash to system link- https://androidfilehost.com/?fid=1395089523397933944
6.wipe cache and delvik cache
7.Swipe to reboot
8.wait for few minutes it booted to bliss rom
caution-
latest system color os a.17 build vendor not worked
flash only linked vendor zip from above
then you good to go
best of luck
Click to expand...
Click to collapse
The same problem persists. It loads the REALME logo, and immediately reboots into the Bootloader.
Is vendor.zip flashed using TWRP Install? Or does it have to be flashed to "boot"?
vendor only flashable from twrp recovery
batflashholmes said:
The same problem persists. It loads the REALME logo, and immediately reboots into the Bootloader.
Click to expand...
Click to collapse
whats the variants phone are you using?
4/64 or 128ufs
indian or others
are you flashing inside any mode?
just flash vendor zip & bliss img to system and reboot,wait some time
Got it to work after flashing vendor.img
Does this require a device specific kernel to already be installed from a previous ROM? When I checked the kernel in my Realme 2 Pro it was the same kernel as what is used by device specific ROMs: 4.4.78-perf+
Can I flash a different kernel from here?
https://github.com/BlissRoms-Kernels
i am not responsible for that,you may try but recommend-no,thanks a lot
galibalmasanick said:
whats the variants phone are you using?
4/64 or 128ufs
indian or others
are you flashing inside any mode?
just flash vendor zip & bliss img to system and reboot,wait some time
Click to expand...
Click to collapse
I use a 4/64 model. Indian itself.
I did not flash inside any mode (that I know of at least).
I ended up bricking my phone completely somehow. It would show the RealMe logo, and then boot up into a blank white screen with an input bar, and keyboard. But nothing else. It refused to boot into the bootloader as well, saying that there was some error.
Also, I had tried flashing the vendor zip first, and then the bliss img. Whenever I did that though, it would show "No OS installed. Do you want to continue?"
Thanks for trying it but this isn't working on your device & I am also sorry, plz try stable rom from xda or stock rom that can be best for you,best of luck ?
Hello everyone,
I flashed my dad's zuk z2 from Lineage 14 to Lineage 16 via TWRP (newest version).I already reinstalled it several times but the result is always the same - after flashing when i restart the phone it will boot to the Zuk-logo and after that a bluescreen appears. Like 5 sec. after that the phone restarts and the loop goes on and on.
Does someone know what to do? I just flashed Lineage 15.1 without a problem.
Thanks in advance!
IMPORTANT INFORMATION
LineAge OS 16 ROM Firmware Required: ZUI 3.5 bootloader
How to flash treble roms having /factory instead of /vendor?
* First time custom rom flasher/ coming from ZUI / Never flashed treble rom / Never flashed factory2vendor patch
1. Flash Treble TWRP ( which supports /factory )
( https://twrp.me/zuk/zukz2.html )
2. Flash ROM + GApps etc
* Coming from roms for which you had done factory2vendor conversion
1. Flash Vendor2factory zip
( https://androidfilehost.com/?fid=962187416754475514 )
2. Flash new TWRP with /factory support
It will work for both non treble like zui , and treble roms having /factory instead of vendor support
( https://twrp.me/zuk/zukz2.html )
3. IMPORTANT STEP : Reboot to new TWRP
4 Flash rom
5. No need to wipe if coming from same rom
Or
1. Flash ZUI via QFIL
2. Flash TWRP ( which supports /factory )
3. Flash rom
updated information on 03/02/2019
Has anyone tried this GSI OneUI 5.0 A13 port to boot on our F3? I really want a OneUI based Rom. But I couldn't afford to try it on my phone coz this is my only phone and I am really busy.
[Discontinued][GSI][Port][13] One UI 5.0 Core
One UI 5.0 Core (Deknox) -Bugs- * Some Devices Not Booting -First Time Install / Clean Flash- 1. Reboot to Recovery 2. Make Format Data 4. Wipe Data/Cache/System/ 5. Flash the ROM 6. Reboot to Recovery 7. Wait a min on Recovery 8. Reboot to...
forum.xda-developers.com
ram1MB said:
Has anyone tried this GSI OneUI 5.0 A13 port to boot on our F3? I really want a OneUI based Rom. I couldn't afford to try it on my phone coz this is my only phone and I am really busy.
[Discontinued][GSI][Port][13] One UI 5.0 Core
One UI 5.0 Core (Deknox) -Bugs- * Some Devices Not Booting -First Time Install / Clean Flash- 1. Reboot to Recovery 2. Make Format Data 4. Wipe Data/Cache/System/ 5. Flash the ROM 6. Reboot to Recovery 7. Wait a min on Recovery 8. Reboot to...
forum.xda-developers.com
Click to expand...
Click to collapse
Trying such this port may brick your device. You need a strong heart.