Hello Community,
I tried to install custom recovery using this manual "wiki.cyanogenmod.org/w/Install_CM_for_serranoltexx" (<- cannot use the link function, because it's my first post). I followed every step. At point 9 I have to make commands using the cmd. Unfortunately the result is an Error:
Failed to access device. libusb error: -12
I had two insecurities while following the manual:
At point 4 I had to rename the recovery image but I'm not sure what the recovery image is. What I downloaded was a .tar.md5 file within a .zip. Do I have to rename the .zip or the .tar.md5? The renaming causes a change of the file type and I cannot really understand, why they didn't put the right file in that .zip at the beginnig...this step is a bit confusing
To point 5: I deinstalled Kies and the device driver in the Windows operating system. Since I've done this, there are appearing two devices in the zadig.exe when I connect my S4. I installed the zadig driver for both of them.
Im using Windows 7 x64
I hope someone can help me, for this moment I don't know what to do further...
greets
Dr. Bob! said:
At point 4 I had to rename the recovery image but I'm not sure what the recovery image is. What I downloaded was a .tar.md5 file within a .zip. Do I have to rename the .zip or the .tar.md5? The renaming causes a change of the file type and I cannot really understand, why they didn't put the right file in that .zip at the beginnig...this step is a bit confusing
Click to expand...
Click to collapse
I don't know about the libUSB error, and I haven't modded a Galaxy S4 mini, but I have installed CM on Galaxy Player. The tar.md5 has to be extracted from the zip; it is in fact a tar.gz file (tar archive compressed with gzip), but you don't have to rename it.
I flashed the Galaxy Player with Odin 3 v. 3.04, after having installed Kies to have the drivers installed. The Player showed in Odin with something like "ID:0 COM"; I then clicked on the "PDA" button, then pointed to the tar.md5, and clicked flashed, and it worked.
Here are my 2 cents :^)
Is your phone rooted? If rooted already it easy! For the most noob method, install ROM Manager from https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager and ROM manager will install the CWM for you. From there, its pretty simple.
If it not rooted, that the first thing you'll have to do.
fdelente said:
[...] The tar.md5 has to be extracted from the zip; it is in fact a tar.gz file (tar archive compressed with gzip), but you don't have to rename it.
Click to expand...
Click to collapse
I found out, the .tar.md5 is also a compressed file. If I extract it, I get a file called "recovery.img". At this point it's not very clear what to do. Because there is nothing to rename. And even if you are right, the tutorial would be also wrong.
TNCS said:
If it not rooted, that the first thing you'll have to do.
Click to expand...
Click to collapse
This is for installing the custom recovery, that's is the root, isn't it? I had the problem that Heimdall doesn't gets access to the device (lubusb error: -12). It's probably a driver problem.
However, I solved the problem by doing another method using odin. The root was succesfull. Afterwards I will flash the custom rom.
Dr. Bob! said:
I found out, the .tar.md5 is also a compressed file. If I extract it, I get a file called "recovery.img". At this point it's not very clear what to do. Because there is nothing to rename. And even if you are right, the tutorial would be also wrong.
This is for installing the custom recovery, that's is the root, isn't it? I had the problem that Heimdall doesn't gets access to the device (lubusb error: -12). It's probably a driver problem.
However, I solved the problem by doing another method using odin. The root was succesfull. Afterwards I will flash the custom rom.
Click to expand...
Click to collapse
No, custom recovery is not rooting. Not my favourite method but it easy enough, try this: http://www.kingoapp.com/
It a universal root for JB and it will prompt you to install CWM afterwards.
After installing the CWM I rooted the device. I succesfully installed Canogenmod 10.2.1. The Tutorial says explicit, that it only helps for 10.2.x but I want to install the Nightly version which is running at CM version 11. If I could, I would ask this questions in the threat but I'm not allowed yet to post in the developers section. "forum.xda-developers.com/showthread.php?t=2474054"
Can I use this tutorial for flashing CM version 11?
Please also read the additional notes in post #2, as they are critical to getting Magisk working.
I decided to do some tinkering around with Magisk, and it actually DOES work on the kindles (at least the 8.9"). The problem is, Magisk's patcher just isolates the ramdisk part of the boot.img and doesn't add the boot signature or other magic back to the image when it's time to reflash the patched boot image. By dd'ing the signature (and other files) back to the image, I can get Magisk to successfully boot.
As part of the working POC (because it's exciting to actually see this!), I've uploaded the patched "Magiskified" boot image (which originally comes from the 20180319 LineageOS 14.1 ROM that was built about a week ago). For reference, this is patched by Magisk v16.0, and the setup is basically the same as the official boot.img makefile directions from CM12.1. (It was the most arbitrary source I found, and I doubt the magic used to create the boot images has changed, so I'm just using that script as a reference.) Try to stick to that ROM if you can - no telling what different ROM versions/variants might do if you're not careful.
I plan on releasing a flashable .zip soon (probably in a month? I have college to work through) to automate the patching process, and possibly even extract the official installer zips to work through Magisk's patching scripts manually so the required boot magic can be patched back into the image before it's ever flashed. (I'll try to take requests to manually patch other ROM boot.imgs if asked to in the meantime though.)
As a friendly reminder, please do NOT flash the official Magisk installer zips or any patched boot images that the app produces as is - they need to be "repatched" with the boot magic, or you'll have to fastboot flash your ROM's boot.img manually because the kindle will hang at the bootloader screen.
Important notes
The official Magisk v16.0 zip must be flashed on first install/reinstall in order to properly construct the environment. Flash the boot image attached in the OP immediately after without rebooting in between, or the image Magisk flashed will prevent the kindle from booting normally without advanced intervention.
SafetyNet does NOT pass the basic integrity OR advanced checks. At least, v16 doesn't. Maybe an earlier Magisk build does - feel free to try it once I get the automated patcher zip up and running.
For now, because you're flashing on LineageOS, you may want to flash the LOS 14.1 arm-based su removal zip from Lineage's downloads site. Verify you're downloading arm and not arm64.
How does one go about patching the boot image thats modified by magisk so it's able to be flashed?
kn0wbodh1 said:
How does one go about patching the boot image thats modified by magisk so it's able to be flashed?
Click to expand...
Click to collapse
It's complicated. I recommend not doing this unless you're willing to follow it to the letter - when I get to creating the automated patcher, this won't be necessary.
Make backups!!
extract the boot.img from your ROM .zip, copy it to the device internal storage
install the Magisk Manager app, download the Magisk .zip and choose "patch boot image"; navigate to said boot image file
copy the modified image to a computer (preferably one running a Linux OS like Ubuntu)
download the boot_cert and u-boot.bin files from the official LineageOS/CM device repo; place these files in the same directory as the boot.img file
open a Linux terminal pointed to the same directory as the boot.img file
run for i in $(seq 1024); do echo -ne "\x00\x50\x7c\x80" >> stack.tmp; done to create the remaining file
run cat boot_cert patched_boot.img > boot.img (assuming the Magisk image produced is named patched_boot.img); this is the boot "signature"
run dd if=u-boot.img of=boot.img bs=8117072 seek=1 conv=notrunc to tag the second bootloader on
finally, run dd if=stack.tmp of=boot.img bs=6519488 seek=1 conv=notrunc to add the stack file; copy the new boot.img back to the kindle
reboot into recovery, flash the Magisk .zip to build the environment, but do NOT reboot yet
choose "Flash .img" within TWRP, select the boot.img, and select "Boot" to flash to the boot partition; reboot to system once complete
profit!
monster1612 said:
It's complicated. I recommend not doing this unless you're willing to follow it to the letter - when I get to creating the automated patcher, this won't be necessary.
Make backups!!
extract the boot.img from your ROM .zip, copy it to the device internal storage
install the Magisk Manager app, download the Magisk .zip and choose "patch boot image"; navigate to said boot image file
copy the modified image to a computer (preferably one running a Linux OS like Ubuntu)
download the boot_cert and u-boot.bin files from the official LineageOS/CM device repo; place these files in the same directory as the boot.img file
open a Linux terminal pointed to the same directory as the boot.img file
run for i in $(seq 1024); do echo -ne "\x00\x50\x7c\x80" >> stack.tmp; done to create the remaining file
run cat boot_cert patched_boot.img > boot.img (assuming the Magisk image produced is named patched_boot.img); this is the boot "signature"
run dd if=u-boot.img of=boot.img bs=8117072 seek=1 conv=notrunc to tag the second bootloader on
finally, run dd if=stack.tmp of=boot.img bs=6519488 seek=1 conv=notrunc to add the stack file; copy the new boot.img back to the kindle
reboot into recovery, flash the Magisk .zip to build the environment, but do NOT reboot yet
choose "Flash .img" within TWRP, select the boot.img, and select "Boot" to flash to the boot partition; reboot to system once complete
profit!
Click to expand...
Click to collapse
Thank you very much for the detailed instructions. I'll be keeping an eye out for the automated patcher you mentioned. Would love to try out magisk on my 2015 fire.
kn0wbodh1 said:
Thank you very much for the detailed instructions. I'll be keeping an eye out for the automated patcher you mentioned. Would love to try out magisk on my 2015 fire.
Click to expand...
Click to collapse
The instructions only work against the 2012 fire (HD 8.9", 2nd generation). They will more than likely brick any other device. I don't recommend trying the instructions unless you're 100% sure your device is that specific model.
Hi, a month ago i flashed oifficial magisk 16 zip on a 8.9 kindle fire hd, and as you said, dont boot anymore, just satys on the kindle fire logo, please can you tell me how can i restore my device?, i havent used it in almost 3 years and i dont have a clue on what to do, i just wanted to install viper4android and now is dead.
erick_gc said:
Hi, a month ago i flashed oifficial magisk 16 zip on a 8.9 kindle fire hd, and as you said, dont boot anymore, just satys on the kindle fire logo, please can you tell me how can i restore my device?, i havent used it in almost 3 years and i dont have a clue on what to do, i just wanted to install viper4android and now is dead.
Click to expand...
Click to collapse
https://forum.xda-developers.com/showthread.php?t=2128848&p=75525760
I know it's not for the 8.9" but I was able to get my 7" working by repeating the procedure in step 5. Magisk messes up the kernel on the Kindle so all you have to do is reflash the kernel. You'll need a fastboot cable to get in fastboot mode though.
Take a look at the few posts before the one I linked to.
just wondering if you've had any luck with the flashable zip for magisk? Not confident enough to try it manually. Thanks in advance.
monster1612 said:
Please also read the additional notes in post #2, as they are critical to getting Magisk working.
I decided to do some tinkering around with Magisk, and it actually DOES work on the kindles (at least the 8.9"). The problem is, Magisk's patcher just isolates the ramdisk part of the boot.img and doesn't add the boot signature or other magic back to the image when it's time to reflash the patched boot image. By dd'ing the signature (and other files) back to the image, I can get Magisk to successfully boot.
As part of the working POC (because it's exciting to actually see this!), I've uploaded the patched "Magiskified" boot image (which originally comes from the 20180319 LineageOS 14.1 ROM that was built about a week ago). For reference, this is patched by Magisk v16.0, and the setup is basically the same as the official boot.img makefile directions from CM12.1. (It was the most arbitrary source I found, and I doubt the magic used to create the boot images has changed, so I'm just using that script as a reference.) Try to stick to that ROM if you can - no telling what different ROM versions/variants might do if you're not careful.
I plan on releasing a flashable .zip soon (probably in a month? I have college to work through) to automate the patching process, and possibly even extract the official installer zips to work through Magisk's patching scripts manually so the required boot magic can be patched back into the image before it's ever flashed. (I'll try to take requests to manually patch other ROM boot.imgs if asked to in the meantime though.)
As a friendly reminder, please do NOT flash the official Magisk installer zips or any patched boot images that the app produces as is - they need to be "repatched" with the boot magic, or you'll have to fastboot flash your ROM's boot.img manually because the kindle will hang at the bootloader screen.
Click to expand...
Click to collapse
barcia99 said:
just wondering if you've had any luck with the flashable zip for magisk? Not confident enough to try it manually. Thanks in advance.
Click to expand...
Click to collapse
You can't directly flash the official installer zips onto the Kindle - they currently bork the boot image "signature" (causing the bootloader exploit to break) and require reflashing the boot image from your ROM via fastboot to get things working again.
What I've thought of is adding some device detection logic to the installer script and then having it run through the process of properly repatching the boot image after the main Magisk install finishes in order to get things to work (as opposed to having a supplementary zip file work through that after an official build is flashed).
I forked the official Magisk repo a while ago and honestly forgot about it, but since v17 hit stable since then, I'm going to rebase those proposed changes against that version. No ETA on that as of yet - I've started back at college, so time is already kind of a rarity; in addition, given the age of the Kindles already (5+ years!), it may not be a thing to sustain long term. I still have my 8.9", so testing isn't an issue, but I don't expect Magisk running on these specific devices to function as expected (so more than likely SafetyNet will fall, probably Magisk Hide as well). I'm not 100% sure how it'll turn out, but these are pretty much going to be unofficial builds for as long as I/anyone else willing to run builds sees a benefit to doing so. When a build works to my satisfaction, I promise it'll go up on XDA.
monster1612 said:
You can't directly flash the official installer zips onto the Kindle - they currently bork the boot image "signature" (causing the bootloader exploit to break) and require reflashing the boot image from your ROM via fastboot to get things working again.
What I've thought of is adding some device detection logic to the installer script and then having it run through the process of properly repatching the boot image after the main Magisk install finishes in order to get things to work (as opposed to having a supplementary zip file work through that after an official build is flashed).
I forked the official Magisk repo a while ago and honestly forgot about it, but since v17 hit stable since then, I'm going to rebase those proposed changes against that version. No ETA on that as of yet - I've started back at college, so time is already kind of a rarity; in addition, given the age of the Kindles already (5+ years!), it may not be a thing to sustain long term. I still have my 8.9", so testing isn't an issue, but I don't expect Magisk running on these specific devices to function as expected (so more than likely SafetyNet will fall, probably Magisk Hide as well). I'm not 100% sure how it'll turn out, but these are pretty much going to be unofficial builds for as long as I/anyone else willing to run builds sees a benefit to doing so. When a build works to my satisfaction, I promise it'll go up on XDA.
Click to expand...
Click to collapse
thank's much. i'll continue to do some research also. i've had this kindle since it came out and remains stable with root and twrp. runs smooth and just plain like it. only negative is no sd card slot. again thanks for your hard work.
Hoping for the automated package
Here's hoping you get time to finish the automated flash package. I am not confident enough to attempt this even with your detailed instructions.
monster1612 said:
You can't directly flash the official installer zips onto the Kindle - they currently bork the boot image "signature" (causing the bootloader exploit to break) and require reflashing the boot image from your ROM via fastboot to get things working again.
What I've thought of is adding some device detection logic to the installer script and then having it run through the process of properly repatching the boot image after the main Magisk install finishes in order to get things to work (as opposed to having a supplementary zip file work through that after an official build is flashed).
I forked the official Magisk repo a while ago and honestly forgot about it, but since v17 hit stable since then, I'm going to rebase those proposed changes against that version. No ETA on that as of yet - I've started back at college, so time is already kind of a rarity; in addition, given the age of the Kindles already (5+ years!), it may not be a thing to sustain long term. I still have my 8.9", so testing isn't an issue, but I don't expect Magisk running on these specific devices to function as expected (so more than likely SafetyNet will fall, probably Magisk Hide as well). I'm not 100% sure how it'll turn out, but these are pretty much going to be unofficial builds for as long as I/anyone else willing to run builds sees a benefit to doing so. When a build works to my satisfaction, I promise it'll go up on XDA.
Click to expand...
Click to collapse
Successfully patched the boot image and installed magisk 18 and installed some modules and they work
Trey n said:
Successfully patched the boot image and installed magisk 18 and installed some modules and they work
Click to expand...
Click to collapse
Great! Will you post the boot image? What modules have you tried? Is Wifi, Bluetooth, and LTE working?
kgiesselman said:
Great! Will you post the boot image? What modules have you tried? Is Wifi, Bluetooth, and LTE working?
Click to expand...
Click to collapse
took me a while but also finally got it all working. Thanks for this guide. It may help us in the 7, 8 and 10 tablets. I also note my Jem is currently on CM13
monster1612 said:
It's complicated. I recommend not doing this unless you're willing to follow it to the letter - when I get to creating the automated patcher, this won't be necessary.
Make backups!!
extract the boot.img from your ROM .zip, copy it to the device internal storage
install the Magisk Manager app, download the Magisk .zip and choose "patch boot image"; navigate to said boot image file
copy the modified image to a computer (preferably one running a Linux OS like Ubuntu)
download the boot_cert and u-boot.bin files from the official LineageOS/CM device repo; place these files in the same directory as the boot.img file
open a Linux terminal pointed to the same directory as the boot.img file
run for i in $(seq 1024); do echo -ne "\x00\x50\x7c\x80" >> stack.tmp; done to create the remaining file
run cat boot_cert patched_boot.img > boot.img (assuming the Magisk image produced is named patched_boot.img); this is the boot "signature"
run dd if=u-boot.img of=boot.img bs=8117072 seek=1 conv=notrunc to tag the second bootloader on
finally, run dd if=stack.tmp of=boot.img bs=6519488 seek=1 conv=notrunc to add the stack file; copy the new boot.img back to the kindle
reboot into recovery, flash the Magisk .zip to build the environment, but do NOT reboot yet
choose "Flash .img" within TWRP, select the boot.img, and select "Boot" to flash to the boot partition; reboot to system once complete
profit!
Click to expand...
Click to collapse
This works on the Kindle Fire HD 7 as well, just use the files from the Tate repository.
Devo7v said:
https://forum.xda-developers.com/showthread.php?t=2128848&p=75525760
I know it's not for the 8.9" but I was able to get my 7" working by repeating the procedure in step 5. Magisk messes up the kernel on the Kindle so all you have to do is reflash the kernel. You'll need a fastboot cable to get in fastboot mode though.
Take a look at the few posts before the one I linked to.
Click to expand...
Click to collapse
I also have the same issue, but I'm confused as to your referencing for Step 5, because the guide says specifically not to flash the freedom-boot image if you already have a custom ROM present. Can you reiterate on what to do, please, or can I ignore this warning?
BrianSamsungTab said:
I also have the same issue, but I'm confused as to your referencing for Step 5, because the guide says specifically not to flash the freedom-boot image if you already have a custom ROM present. Can you reiterate on what to do, please, or can I ignore this warning?
Click to expand...
Click to collapse
I reflashed the freedom-boot and got everything working properly. It's been a few months so I don't remember if i had to continue anything when it finally booted, but I do know that I didn't lose any data. I still don't know if you need to flash freedom-boot, but it works if you do.
a little late to the party but-
i recently made the mistake of installing magisk and it put the kindle in a bootloop. is there a way to push the stock boot.img with this method or is that too quick and dirty
any advice is appreciated. im tempted to just do a full wipe via the stock recovery but if theres a more surgical method id go for it. i also have a linux debian machine available.
Just to add my experience here, I flashed MARS_SOM magisk rom module which entered a seemingly unrecoverable endless bootloop. This was likely as it conflicted with another magisk module or xposed that I have installed, so not the fault of the rom!
However given we've no twrp yet, the best way (after a LOT of research!) to fix this wasn't easy or obvious. I thought I could just flash stock kernel, uninstall magisk, flash magisk again and uninstall the module. Which unfortunately you can't as they remain in the system files and without root, you can't touch them, though with root, it loads and you get the bootloop - so a vicious endless cycle!
The solution I managed to work out, rather than a full clean wipe was to extract the stock boot from downloaded firmware (using Xperifirm), convert it to an img file using UnSIN, use to unpack, place a certain folder in there (found via the link below), repack and then fastboot flash. This makes magisk operate in core root mode only allowing you to uninstall the module. Once the module is uninstalled, you can simply disable core only mode from the magisk settings.
This saved me from a full wipe!
See here for more details about that unpacking the img, copying a folder etc see here:
https://forum.xda-developers.com/pi...modules-disabler-booting-magisk-t3976621/amp/
This worked for me and so hope it helps someone out too!
cd993 said:
Just to add my experience here, I flashed MARS_SOM magisk rom module which entered a seemingly unrecoverable endless bootloop. This was likely as it conflicted with another magisk module or xposed that I have installed, so not the fault of the rom!
However given we've no twrp yet, the best way (after a LOT of research!) to fix this wasn't easy or obvious. I thought I could just flash stock kernel, uninstall magisk, flash magisk again and uninstall the module. Which unfortunately you can't as they remain in the system files and without root, you can't touch them, though with root, it loads and you get the bootloop - so a vicious endless cycle!
The solution I managed to work out, rather than a full clean wipe was to extract the stock boot from downloaded firmware (using Xperifirm), convert it to an img file using UnSIN, use to unpack, place a certain folder in there (found via the link below), repack and then fastboot flash. This makes magisk operate in core root mode only allowing you to uninstall the module. Once the module is uninstalled, you can simply disable core only mode from the magisk settings.
This saved me from a full wipe!
See here for more details about that unpacking the img, copying a folder etc see here:
https://forum.xda-developers.com/pi...modules-disabler-booting-magisk-t3976621/amp/
This worked for me and so hope it helps someone out too!
Click to expand...
Click to collapse
With Unsin (on windows at least) you can just drag your file over the cmd without having to mess with command lines
AJHutchinson said:
With Unsin (on windows at least) you can just drag your file over the cmd without having to mess with command lines
Click to expand...
Click to collapse
Yeah that's a handy little feature, makes converting it super simple!
cd993 said:
Just to add my experience here, I flashed MARS_SOM magisk rom module which entered a seemingly unrecoverable endless bootloop. This was likely as it conflicted with another magisk module or xposed that I have installed, so not the fault of the rom!
However given we've no twrp yet, the best way (after a LOT of research!) to fix this wasn't easy or obvious. I thought I could just flash stock kernel, uninstall magisk, flash magisk again and uninstall the module. Which unfortunately you can't as they remain in the system files and without root, you can't touch them, though with root, it loads and you get the bootloop - so a vicious endless cycle!
The solution I managed to work out, rather than a full clean wipe was to extract the stock boot from downloaded firmware (using Xperifirm), convert it to an img file using UnSIN, use to unpack, place a certain folder in there (found via the link below), repack and then fastboot flash. This makes magisk operate in core root mode only allowing you to uninstall the module. Once the module is uninstalled, you can simply disable core only mode from the magisk settings.
This saved me from a full wipe!
See here for more details about that unpacking the img, copying a folder etc see here:
https://forum.xda-developers.com/pi...modules-disabler-booting-magisk-t3976621/amp/
This worked for me and so hope it helps someone out too!
Click to expand...
Click to collapse
Hi there; I was in the same situation, flashing a corrupted magisk boot image from standard firmware for XQ-AT51, provided by same author for simple rooting Xperia 1 II; my phone was without xposed, it was in clean factory state. the magisk boot image was taken from another thread "[ROOT] Magisk patched Boot Images & Instructions" designated for rooting of Xperia 1 II;
unfortunately is the same author who build your ROM, he delivered also corrupted magisk image.
It was not enter in bootloop if you flash only one image on phone, not both; his instructions are wrong. the correct flashing instruction is below, at end of my comment.
I solved in smilar way like you: using flashtool to obtain XQ-AT51 ftf file: XQ-AT51_58.0.A.3.39_1321-7706_R13A.ftf;
Attention: the name of file depends of region firmware you want to flash and type of phone (single or dual sim); the given names are with title of example.
Then from download folder of flashtool form your disk C:\Users\username\.flashTool\firmwares\Downloads (username is your username on pc); check for file: boot_X-FLASH-ALL-2389.sin ( applicable for XQ-AT51) and convert the file to .img using unsin; check on xda for unsin, extract unsin archive in exe file and then drag & drop over unsin.exe the file boot_X-FLASH-ALL-2389.sin; will be generated boot_X-FLASH-ALL-2389.img file.
This name file can be other, is just an example, if you have another phone with firmware for other region, pay attention to this!
This can be flashed then back to phone using adb comands; fastboot flash boot boot_X-FLASH-ALL-2389.img;
The same image can be transfered to phone and used later to generate correct magisk image and root the phone.
Best to you all!
daphix said:
Hi there; I was in the same situation, flashing a corrupted magisk boot image from standard firmware for XQ-AT51, provided by same author for simple rooting Xperia 1 II; my phone was without xposed, it was in clean factory state. the magisk boot image was taken from another thread "[ROOT] Magisk patched Boot Images & Instructions" designated for rooting of Xperia 1 II;
unfortunately is the same author who build your ROM, he delivered also corrupted magisk image.
It was not enter in bootloop if you flash only one image on phone, not both; his instructions are wrong. the correct flashing instruction is below, at end of my comment.
I solved in smilar way like you: using flashtool to obtain XQ-AT51 ftf file: XQ-AT51_58.0.A.3.39_1321-7706_R13A.ftf;
Attention: the name of file depends of region firmware you want to flash and type of phone (single or dual sim); the given names are with title of example.
Then from download folder of flashtool form your disk C:\Users\username\.flashTool\firmwares\Downloads (username is your username on pc); check for file: boot_X-FLASH-ALL-2389.sin ( applicable for XQ-AT51) and convert the file to .img using unsin; check on xda for unsin, extract unsin archive in exe file and then drag & drop over unsin.exe the file boot_X-FLASH-ALL-2389.sin; will be generated boot_X-FLASH-ALL-2389.img file.
This name file can be other, is just an example, if you have another phone with firmware for other region, pay attention to this!
This can be flashed then back to phone using adb comands; fastboot flash boot boot_X-FLASH-ALL-2389.img;
The same image can be transfered to phone and used later to generate correct magisk image and root the phone.
Best to you all!
Click to expand...
Click to collapse
Thanks for that, glad you managed to fix your situation too!
cd993 said:
Thanks for that, glad you managed to fix your situation too!
Click to expand...
Click to collapse
What to posted you is very very usefull; it helps you to fix after flashing wrong magisk module.
:good:
Hi Guys,
For some reasons, my kernel got updated without any change from me, not sure how this is possible.
Now, because of that, I lost root, is there a quick way to restore root (magisk) ?
Thanks in advance !
Yep. Just download the matching factory image zip for your currently installed build of Android. Then, extract the boot.img file, copy it over to your phone, patch it within the Magisk app and it will spit out a patched boot.img file into your "Download" folder. Next, copy that patched boot.img file back to your computer and flash that patched boot file using fastboot.
That may look like a lot of different steps, however, the process usually takes less time than it has taken me to type this comment, haha. Enjoy your root access =)