Related
Hi all,
I have a kindle fire with system version 6.3_user_4019920.
I used Kindle Fire Utility 0.9.5, installed TWRP, FFF and Permanent Root with Superuser (option 2).
I did NOT installed Google Apps/Go Luncher EX though!
Everything went just fine with no errors at all.
I installed ProxyDroid 2.6.2 and that tells me that I am not root. I checked also to see if the device is rooted installing Root Checker app and that tells me also: "Sorry, you don't have root access"
Any help would be appreciated!
Regards,
osceoladad said:
Hi all,
I have a kindle fire with system version 6.3_user_4019920.
I used Kindle Fire Utility 0.9.5, installed TWRP, FFF and Permanent Root with Superuser (option 2).
I did NOT installed Google Apps/Go Luncher EX though!
Everything went just fine with no errors at all.
I installed ProxyDroid 2.6.2 and that tells me that I am not root. I checked also to see if the device is rooted installing Root Checker app and that tells me also: "Sorry, you don't have root access"
Any help would be appreciated!
Regards,
Click to expand...
Click to collapse
I have this problem too, KFU doesn't seem to copy su binary to /system/xbin, so just do it your self from adb (su binary located in the "files" folder inside KFU), then set permission to it as 06755, finally open install Superuser.apk.
Reboot into recovery mode
adb shell mount system
adb push ..\files\su /system/xbin/su
adb shell chown 0.0 /system/xbin/su
adb shell chmod 06755 /system/xbin/su
adb install ..\files\Superuser.apk
Thank you.
I did all steps, but at the last command (adb install ..\files\Superuser.apk) I got the following error:
/sbin/sh: pm: not found
osceoladad said:
Thank you.
I did all steps, but at the last command (adb install ..\files\Superuser.apk) I got the following error:
/sbin/sh: pm: not found
Click to expand...
Click to collapse
You must boot out of recovery and back into the system before executing the adb install command.
kinfauns said:
You must boot out of recovery and back into the system before executing the adb install command.
Click to expand...
Click to collapse
Thanks,
I saw that KFU was showing 5000 status mode. So, I did: "fastboot oem idme bootmode 4000" I got an OKAY on the PC screen and now the Kindle Fire is stucked at the logo (I cannot even power it off). I disconnected and reconnected but know even the computer is not recognizing it.
Any other suggestions?
osceoladad said:
Thanks,
I saw that KFU was showing 5000 status mode. So, I did: "fastboot oem idme bootmode 4000" I got an OKAY on the PC screen and now the Kindle Fire is stucked at the logo (I cannot even power it off). I disconnected and reconnected but know even the computer is not recognizing it.
Any other suggestions?
Click to expand...
Click to collapse
That only changes the bootmode. You need to actually tell it to reboot.
Code:
fastboot reboot
Maybe you want to read the first few posts of this link...
http://forum.xda-developers.com/showthread.php?t=1552547
It will help you understand what you are doing rather than just typing commands.
kinfauns said:
That only changes the bootmode. You need to actually tell it to reboot.
Code:
fastboot reboot
Maybe you want to read the first few posts of this link...
http://forum.xda-developers.com/showthread.php?t=1552547
It will help you understand what you are doing rather than just typing commands.
Click to expand...
Click to collapse
That is exactly the article from were I have the command. Unfortunetly because the kindle is now stucked at the logo (cannot turn it off) even if I issue fastboot reboot is waiting for a device that is not recognized.
osceoladad said:
That is exactly the article from were I have the command. Unfortunetly because the kindle is now stucked at the logo (cannot turn it off) even if I issue fastboot reboot is waiting for a device that is not recognized.
Click to expand...
Click to collapse
Hold the power button until it shuts off. Then restart.
First what is the charge level on your battery that can happen from your battery being flat also maybe try powering it off by holding the power button for 20 seconds till it does completely power down some say to reinstall your drivers but I can't imagine why how and where they could have changed considering how far you have gotten
It worked and I was able to finishe the rooting also.
Thanks for all guys who replied, wasted their time and helped me out!
I needed all this because of a Europe trip and I run a Squid proxy here in US that I want to use it for netflix. Hopefully ProxyDruid will help me out.
Best,
I'm having a similar problem. I used KFU 0.9.6 and installed permanent root and twrp. I've even flashed the latest jandycane ROM. It's super stable and have had no problems except that I can't run apps that require root. The root checker says I don't have root. I tried running the above adm commands but with no luck. Any help is appreciated.
Sent from my Amazon Kindle Fire using Tapatalk 2
mcqueena9845 said:
I'm having a similar problem. I used KFU 0.9.6 and installed permanent root and twrp. I've even flashed the latest jandycane ROM. It's super stable and have had no problems except that I can't run apps that require root. The root checker says I don't have root. I tried running the above adm commands but with no luck. Any help is appreciated.
Sent from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
Enter the following command and post the results:
adb shell ls /system/xbin | grep '\bsu\b'; echo $?
Click to expand...
Click to collapse
soupmagnet said:
Enter the following command and post the results:
Click to expand...
Click to collapse
I'm not on mac or linux so the grep command fails. The output of
Code:
adb shell ls /system/xbin/su
is
Code:
/system/xbin/su
---------- Post added at 04:39 PM ---------- Previous post was at 03:57 PM ----------
I ran the utility again. Now /system/xbin/su is a symbolic link to /system/bin/su. The output of
Code:
adb shell ls -al /system/xbin/su
is
Code:
lrwxrwxrwx root root 2012-10-10 16:29 su -> /system/bin/su
and the output of
Code:
adb shell ls -al /system/xbin/su
is
Code:
-rwsr-sr-x root root 173934 2008-08-01 08:00 su
Sorry, it's easy for me to forget about you windows users
Do you have terminal emulator?
See if the "su" command is successful.
soupmagnet said:
Sorry, it's easy for me to forget about you windows users
Do you have terminal emulator?
See if the "su" command is successful.
Click to expand...
Click to collapse
Code:
/system/bin/sh: /system/bin/su: not executable: magic 7F45
Apparently your su binary is corrupt. Use adb shell to remove it and then adb push a new version to your /system/xbin folder. Afterwards (adb shell) chown and chmod to give it the proper ownership/permissions and try again.
I'm assuming you already know how to do this.
---------- Post added at 05:06 PM ---------- Previous post was at 04:59 PM ----------
Upon further inspection, it seems as though you installed the wrong su binary. There are two available; x86 and ARM. You need ARM.
Thanks for the help. I pushed a new su file. Now it says permission denied. What should the permissions be set to? I tried 06755 as above but no luck.
Sent from my PC36100 using Tapatalk 2
Code:
adb shell
chown 0.0 /system/xbin/su
chmod 755 /system/xbin/su
Then try su in terminal emulator
Still getting permission denied.
Sent from my Amazon Kindle Fire using Tapatalk 2
mcqueena9845 said:
Still getting permission denied.
Sent from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
Sorry, I told you wrong.
Code:
adb shell chmod 06775 /system/xbin/su
So I've just got hold of a brand new 2nd gen TV stick for the purpose of rooting or debloating at least.
I know that the most recent firmware won't permit either.
So far I can't even get to the registration screen onwards to access any of the options such as enabling ADB.
I've tried unplugging the telephone line and killing the wifi at various times, it keeps giving me an error and going back to the choose a wifi network screen.
Can anyone offer any suggestions, is there a post I have missed somewhere about how to do this?
Thanks
I have found the following information:
allow: softwareupdates.amazon.com and updates.amazon.com
block: amzdigital-a.akamaihd.net and amzdigitaldownloads.edgesuite.net
I will test this later and report back if this works for others.
Maybe I'm talking to myself here but what I posted above works perfectly though isn't even necessary as an easier option exists!
New information I have no seen posted up anywhere..
**If you connect to the stick via the Amazon remote app on a phone/tablet as soon as you have connected to your wifi network, you can use it to skip forward past the update screen into the settings screen and enable ADB right away. Then hit it with the ADB uninstall commands quick to remove OTA.**
This means you can also skip over having to register it with an Amazon account
No router blocking or opendns faffing around required.
matt09 said:
Maybe I'm talking to myself here but what I posted above works perfectly though isn't even necessary as an easier option exists!
New information I have no seen posted up anywhere..
**If you connect to the stick via the Amazon remote app on a phone/tablet as soon as you have connected to your wifi network, you can use it to skip forward past the update screen into the settings screen and enable ADB right away. Then hit it with the ADB uninstall commands quick to remove OTA.**
This means you can also skip over having to register it with an Amazon account
No router blocking or opendns faffing around required.
Click to expand...
Click to collapse
Thank you will use your info.
What firmware are you on?
Whatever the stock OS is that ships with the stick at the moment. Will check later.
I tried doing this but in the setting under device the developer options are not there.
Thank you I was able to get past the update screen. Were you able to register after sending adb disable codes for ota? I am a newbie to this and never have used adb. I sideloaded 3rd party launcher with boottoappstarter and hijack launcher so now it skips the update and registration screen automatically but I cannot figure out how to stop that chiming noise that starts after splash screen prompting me to hit the play button to continue! The chime is driving me insane lol. Any ideas?
Exactly a year ago I thought that the update failure at the first launch of fire stick tv was impassable. No way to register an amazon account.
This thread allowed me to pull out my fire stick that was left in a drawer.
Thanks to matt09 for finding the tip of the Fire Tv app giving access to the settings and therefore access to the adb debugging.
Luckily my OS is 5.2.6.0
I followed in his footsteps and then I got a little lost.
Once the blockage of the last update is over, I discover the interface. It is limited since Home does not work. I have access to the settings and therefore to the program manager, but no native apps accept to be launched.
Doesn't Home work because I don't have an Amazon account? How to make native applications work?
Nevertheless, I continued the steps. That's what I did:
- BLOCK SOFTWARE UPDATES w/ ADB (lol is useless for me, but you never know...) :
For an unknown reason the command adb uninstall -k --user 0 com.**** must be replaced by adb shell pm uninstall -k --user 0 com.****
Code:
adb shell pm uninstall -k --user 0 com.amazon.device.software.ota
adb shell pm uninstall -k --user 0 com.amazon.device.software.ota.override
- SIDELOAD APPS w/ ADB :
LauncherHijackV402, smartyoutubetv_latest, org.mozilla.firefox_65.0-2015607433, MiXplorer, Nova Launcher-Prime-v6.0-beta13_build_59914, HALauncher-2.0.2.1, Package Names Viewer.ver.2.1.2091.build.18, AppStarter-v4.0, CAJA TV Downloader.ver.1.2.build. 3
- UNINSTALL BLOATWARES:
NOTE: FROM THIS STEP >> Fire Tv App DOES NOT FUNCTION: A BLOATWARE WILL NOT HAVE TO BE DESINSTALLE, BUT WHICH?]
In order to later identify the bloatware needed to run Fire tv app, I prepared this batch :
Code:
@title uninstall bloatware
@echo off
adb start-server
cls
color 0e
echo.
cls
echo --------------------------------------------------------------------------------------------------------------
echo uninstall bloatwares
echo --------------------------------------------------------------------------------------------------------------
pause >nul
echo [*-*] Waiting for Device.
adb wait-for-device
adb shell pm uninstall -k --user 0 com.amazon.ags.app
adb shell pm uninstall -k --user 0 com.amazon.android.marketplace
adb shell pm uninstall -k --user 0 com.amazon.bueller.music
adb shell pm uninstall -k --user 0 com.amazon.bueller.notification
adb shell pm uninstall -k --user 0 com.amazon.client.metrics
adb shell pm uninstall -k --user 0 com.amazon.client.metrics.api
adb shell pm uninstall -k --user 0 com.amazon.communication.discovery
adb shell pm uninstall -k --user 0 com.amazon.connectivitydiag
adb shell pm uninstall -k --user 0 com.amazon.device.crashmanager
adb shell pm uninstall -k --user 0 com.amazon.device.logmanager
adb shell pm uninstall -k --user 0 com.amazon.device.messaging
adb shell pm uninstall -k --user 0 com.amazon.device.sync
adb shell pm uninstall -k --user 0 com.amazon.dp.logger
adb shell pm uninstall -k --user 0 com.amazon.identity.auth.device.authorization
adb shell pm uninstall -k --user 0 com.amazon.imp
adb shell pm uninstall -k --user 0 com.amazon.kindle.cms
adb shell pm uninstall -k --user 0 com.amazon.kindle.devicecontrols
adb shell pm uninstall -k --user 0 com.amazon.kso.blackbird
adb shell pm uninstall -k --user 0 com.amazon.ods.kindleconnect
adb shell pm uninstall -k --user 0 com.amazon.platform.fdrw
adb shell pm uninstall -k --user 0 com.amazon.providers
adb shell pm uninstall -k --user 0 com.amazon.providers.contentsupport
adb shell pm uninstall -k --user 0 com.amazon.recess
adb shell pm uninstall -k --user 0 com.amazon.securitysyncclient
adb shell pm uninstall -k --user 0 com.amazon.sharingservice.android.client.proxy
adb shell pm uninstall -k --user 0 com.amazon.sync.provider.ipc
adb shell pm uninstall -k --user 0 com.amazon.sync.service
adb shell pm uninstall -k --user 0 com.amazon.tcomm
adb shell pm uninstall -k --user 0 com.amazon.tcomm.client
adb shell pm uninstall -k --user 0 com.amazon.tmm.tutorial
adb shell pm uninstall -k --user 0 com.amazon.tv.csapp
adb shell pm uninstall -k --user 0 com.amazon.tv.fw.metrics
adb shell pm uninstall -k --user 0 com.amazon.tv.legal.notices
adb shell pm uninstall -k --user 0 com.amazon.tv.oobe
adb shell pm uninstall -k --user 0 com.amazon.tv.support
adb shell pm uninstall -k --user 0 com.amazon.videoads.app
adb shell pm uninstall -k --user 0 com.amazon.visualonawv
adb shell pm uninstall -k --user 0 com.amazon.vizzini
adb shell pm uninstall -k --user 0 com.amazon.whisperlink.core.android
adb shell pm uninstall -k --user 0 com.amazon.whisperplay.contracts
adb shell pm uninstall -k --user 0 com.amazon.whisperplay.service.install
adb shell pm uninstall -k --user 0 com.android.managedprovisioning
echo Done! Press any key to continue.
pause >nul
exit
-ADJUST DISPLAY SIZE: There is no option on my old tv to change the aspect ration or unzoom etc... the gray arrows are cut off on the firestick and I couldn't adjust it. I found a solution with :
Code:
adb shell
wm overscan 48,28,48,48,28
reboot
- CUSTOM LAUNCHER w/ WIDGETS: bypass the system and the Amazon native launcher with the LauncherHijack trick:
Code:
adb install <path to LauncherHijack.apk>
adb shell settings put secure enabled_accessibility_services com.baronkiko.launcherhijack
- DEFINE NOVA AS LAUNCHER THANKS TO THE WIDGET :
Navigate to /system/bin
Copy "appwidget" >> Paste it in the root of your internal storage /sdcard/
Change the file extension to.sh
Code:
adb shell
sh /sdcard/appwidget.sh
exit
adb shell appwidget grantbind appwidget --package com.teslacoilsw.launcher --user 0
In spite of [ERROR] unsupported operation : null I went to the next step to give the widget function to my Nova Launcher
Click to expand...
Click to collapse
RESULT: Nova Laucher opens at boot time but it is almost useless for me because of lack of control tools (mouse or Fire Tv app). So I ask again the question: Doesn't all this work 100% because I don't have an Amazon account, or did I miss a step?
I hope matt09 will come back to specify the missing steps
This is old and dont use Nova Launcher on a TV. Use an android tv launcher.
Hi,
Glad the information was useful to people.
You seem to have uninstalled things that are needed for core functionality, but I'm not sure what..
You would be best reset the stick then start over but this time be more careful about what you remove after taking OTA down.
Oh yes, thanks @TimmyP, it's much better with Leanback launcher.
There's still something wrong : how to return to the native menu to restart fire stick, for example, or return to the development options menu, screensaver settings...?
Maybe a combination of keys allows it? Or a specific application? (Confirator does not allow it)
EDIT : Press and hold the Home button on your remote is the solution
@matt09 As @TimmyP noticed, it was Nova launcher that caused me problems. So yes I started again from scratch. I didn't go beyond the bloatware list proposed by Bropinski. Have you kept a record of yours?
Debloating is great but, as you mentionned it somewhere, phone can no longer see the stick and connect to it via the Fire TV app
By the way, the guilty is not :
Code:
adb uninstall -k --user 0 com. amazon. whisperlink. core. android
Hey guys, just got my 1080p stick.
I am interested to follow the steps of @matt09 and then sideload streaming apps like the Cinema APK and KODI.
Should I follow some specific steps after bypassing the update process?
Are there any mandatory commands for ADB?
And BTW, how do you send all these commands to the device? By connecting it on a PC with Windows, like with mobiles?
And what PC drivers do I need?
imho disabling updates is pointless, removing bloatware is pointless too since you never see it anyway, block update servers with router if you want
1. hijackLauncher v4
2. install HAL Launcher or (my recommendation) "Top TV Launcher 2."
3. install whatever apps you want (Kodi, emulators, Youtube modded)
4. install Stay Alive so it doesnt sleep (appears not to work but does)
No pc drivers, just enable debugging on the stick and connect wireless adb from pc. Install with "adb install whatever.apk"
I havent seen the Amazon Launcher since LauncherHijack v4. Looks beautiful too with Launcher with user selectable background.
PS: I can get back to Amazon settings within Top TV Launcher by selecting the icon on the bottom.
Oh and dont forget to select launcher by running hijack after step 2!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The down arrow in this launcher brings up popup for Amazon setting (middle icon)
TimmyP said:
imho disabling updates is pointless, removing bloatware is pointless too since you never see it anyway, block update servers with router if you want
1. hijackLauncher v4
2. install HAL Launcher or (my recommendation) "Top TV Launcher 2."
3. install whatever apps you want (Kodi, emulators, Youtube modded)
4. install Stay Alive so it doesnt sleep (appears not to work but does)
No pc drivers, just enable debugging on the stick and connect wireless adb from pc. Install with "adb install whatever.apk"
I havent seen the Amazon Launcher since LauncherHijack v4. Looks beautiful too with Launcher with user selectable background.
PS: I can get back to Amazon settings within Top TV Launcher by selecting the icon on the bottom.
Oh and dont forget to select launcher by running hijack after step 2!
The down arrow in this launcher brings up popup for Amazon setting (middle icon)
Click to expand...
Click to collapse
Points 1 and 2 are both for launchers?
And how do I install them?
Through the standard store?
Point 4. Why is needed?
How to enable debugging? Through the standard settings menu?
And why is needed to connect wireless adb?
Sent from my ONEPLUS A6003 using Tapatalk
Yes, when 1 and 2 are installed, just run the hijack app and pick Top TV (or whatever).
Debugging turned on in Fire TV settings.
4 is optional really, I just mention it because whenever your Fire stick sleeps, it resumes to the Amazon launcher and you have to press home or select the launcher in apps to get back. This keeps it on, stopping it from happening.
Wireless adb is far easier than Es file explorer. You could just use that with the LAN functionality to a local SMB share.
Downloaded the hi jacker, but it requires some Accessibility option to be turned on, but couldn't find anything related to that under Settings>accessibility
Any ideas?
Sent from my ONEPLUS A6003 using Tapatalk
Did you enabled the accessibility service using this command?:
Code:
adb shell settings put secure enabled_accessibility_services com.baronkiko.launcherhijack/com.baronkiko.launcherhijack.AccServ
liott said:
Did you enabled the accessibility service using this command?:
Code:
adb shell settings put secure enabled_accessibility_services com.baronkiko.launcherhijack/com.baronkiko.launcherhijack.AccServ
Click to expand...
Click to collapse
These are 4 separate commands and I have to press enter between every line?
Or I write all of them together and hit enter once?
Sent from my ONEPLUS A6003 using Tapatalk
Just copy the command line above and press 'enter'
After that if it doesn't work right away, go into the standard fire TV settings and toggle on some accessibility options. Then press home and see if launcher pops up
Hi everyone,
I would like to debloat my phone by uninstalling apps for my profile instead of disabling them but i'm always getting "Failure [INSTALL_FAILED_INVALID_APK: Missing existing base package for null]"
Code:
PS C:\Program Files (x86)\Mini ADB and Fastboot> ./adb.exe shell pm uninstall -k --user 0 com.microsoft.office.officehubrow
Failure [INSTALL_FAILED_INVALID_APK: Missing existing base package for null]
I tried other apps with the same result. Of course,I have installed the samsung android drivers for windows, activated USB Debugging mode on my phone and if i send other kinds of commands like "./adb.exe shell pm list package", it work.
Thank you for your help!
Because those aren't apps but app stubs. Disable them instead.
Hi all,
Upon changing accounts I get the usual "App not owned" error.
I know that it's easy to rectify by simply adding it to the account which is currently associated with the device, but I wondered if there is a "cleaner" way.
Of course another solution is simply "adb connect 192.168.1.xx" and "adb install app.apk" but this is still very annoying to do each time.
I have root access but I wonder if it's possible to change app permissions through "adb shell > su" in some way.
Is it possible to get rid of this error by changing the app permissions with adb? Thanks so much for all your help on this forum as it's always amazing.
user1209283475 said:
Hi all,
Upon changing accounts I get the usual "App not owned" error.
I know that it's easy to rectify by simply adding it to the account which is currently associated with the device, but I wondered if there is a "cleaner" way.
Of course another solution is simply "adb connect 192.168.1.xx" and "adb install app.apk" but this is still very annoying to do each time.
I have root access but I wonder if it's possible to change app permissions through "adb shell > su" in some way.
Is it possible to get rid of this error by changing the app permissions with adb? Thanks so much for all your help on this forum as it's always amazing.
Click to expand...
Click to collapse
Changing app permission via ADB:
Grant (Permitted)
Code:
adb shell pm grant <package-name> <permission>
//Example
adb shell pm grant com.facebook.orca android.permission.GET_ACCOUNTS
Revoke (Unpermitted)
Code:
adb shell pm revoke <package-name> <permission>
//Example
adb shell pm revoke com.facebook.orca android.permission.GET_ACCOUNTS
Thanks so much mate, really appreciated, I wish you an endless supply of sugar-food/alcohol of choice.
AmznUser444 Dev said:
Changing app permission via ADB:
Grant (Permitted)
Code:
adb shell pm grant <package-name> <permission>
//Example
adb shell pm grant com.facebook.orca android.permission.GET_ACCOUNTS
Revoke (Unpermitted)
Code:
adb shell pm revoke <package-name> <permission>
//Example
adb shell pm revoke com.facebook.orca android.permission.GET_ACCOUNTS
Click to expand...
Click to collapse
Heya,
so I tried that with a package while I had superuser access and got an error:
Operation not allowed: java.lang.SecurityException: Package uk.co.bbc.iplayer has not requested permission android.permission.GET_ACCOUNTS
I assume that the command has to be issued while the application was launched? However it still doesn't work.
I was hoping to get a way so the app is considered "owned" by the device even if the account is changed.
I have MIUI 14 running Andriod 13.
I have been remove those miui bloatware one by one. So far it is fine.
But I am not able to remove the below. Any advise?
pm uninstall -k --user 0 com.miui.screenrecorder
Failure [-1000]
pm list package --user 0 | grep miui
package:com.miui.powerkeeper
package:com.miui.miwallpaper.overlay.customize
package:android.miui.overlay
package:android.miui.home.launcher.res
package:com.miui.face
package:com.miui.phone.carriers.overlay.vodafone
package:com.miui.global.packageinstaller
package:com.miui.micloudsync
package:com.miui.rom
package:com.miui.core.internal.services
package:com.miui.audiomonitor
package:com.miui.aod
package:com.android.server.telecom.overlay.miui
package:com.miui.screenrecorder
package:com.miui.guardprovider
package:com.miui.cloudbackup
package:com.miui.systemui.overlay.devices.android
package:com.lbe.security.miui
package:com.miui.securityadd
package:com.miui.gallery
package:com.miui.calculator
package:com.miui.notification
package:miui.systemui.plugin
package:com.miui.bugreport
package:com.miui.mediaeditor
package:com.miui.system
package:com.miui.securitycenter
package:com.miui.audioeffect
package:com.miui.qr
package:com.miui.home
package:com.miui.wmsvc
package:com.android.systemui.overlay.miui
package:com.android.inputsettings.overlay.miui
package:com.miui.systemui.devices.overlay
package:com.miui.misound
package:com.miui.wallpaper.overlay.customize
package:com.google.android.cellbroadcastservice.overlay.miui
package:com.miui.daemon
package:com.miui.securitycore
package:com.miuix.editor
package:com.android.carrierconfig.overlay.miui
package:com.miui.android.fashiongallery
package:com.miui.settings.rro.device.hide.statusbar.overlay
package:com.android.settings.overlay.miui
package:com.miui.phrase
package:com.miui.extraphoto
package:com.miui.wallpaper.overlay
package:com.miui.core
package:com.miui.settings.rro.device.type.overlay
package:com.miui.compass
package:com.miui.face.overlay.miui
package:com.miui.freeform
package:com.miui.phone.carriers.overlay.h3g
package:com.miui.notes
package:com.miui.miwallpaper
package:com.miui.systemui.carriers.overlay
package:com.miui.backup
package:com.miui.settings.rro.device.config.overlay
package:com.miui.screenshot
package:com.google.android.cellbroadcastreceiver.overlay.miui
package:com.miui.system.overlay
package:com.miui.miinput
package:com.miui.cloudservice
package:com.miui.miwallpaper.overlay
package:com.android.phone.overlay.miui
Some apps are prevented from uninstalling. I believe you can disable them instead.
Bash:
pm disable-user --user 0 <package>
If this still doesn't work you can try manually disabling/uninstalling it in settings.
PS: You don't need adb & computer to open shell, you can download termux/terminal emulator instead
hadrbass89 said:
Some apps are prevented from uninstalling. I believe you can disable them instead.
Bash:
pm disable-user --user 0 <package>
If this still doesn't work you can try manually disabling/uninstalling it in settings.
PS: You don't need adb & computer to open shell, you can download termux/terminal emulator instead
Click to expand...
Click to collapse
Thank you. I notice inside the setting option there is screen recorder there and long list of items. It seems to be by various apps that integrated together.
As such it cannot be removed.
Try to install ADB App Control, so you could delete every system app you want