Develop Bugs

Universal safety net

After flashing universal safetynet, when i open magisk manager it shows magisk is not install but in case i have installed it. The safety net succes with ctsProfile and basicIntegrity.
Please help me out of it.
It happens in my Moto G5s(montana)
Thanks in advance it will be big help for me.

sumirandahal76 said:
After flashing universal safetynet, when i open magisk manager it shows magisk is not install but in case i have installed it. The safety net succes with ctsProfile and basicIntegrity.
Please help me out of it.
It happens in my Moto G5s(montana)
Thanks in advance it will be big help for me.
Click to expand...
Click to collapse
Universal SafetyNet is long discontinued. You're better off with @Didgeridoohan's Magisk Hide Props Config module.
Sent from my Moto G5S using XDA Labs

Not only is it discontinued, while it was still being actively developed it was already replacing Magisk internals with it's own stuff (a rather stupid move causing all kinds of problems). Now, even though it's dead, it's zombie corpse is still moving about the internet, eating the brains of Magisk and messing up users devices.

Please tell me how can I fix this issue ?
Please

This zip is there after flashing safety net ?
MagiskHidePropsConfig what i should do ?
Please help me ??

Xposed and Safety Net Pass -- How To!

XPOSED and Safety Net PASS -- Instructions How To
I've been using Xposed because it has functionality that I don't want to give up. But "regular" Xposed won't pass Safety Net.
Thanks to @drewcu, I now have found a way to use Xposed and PASS Safety Net.
This is important enough it deserves its own Guide thread. All credit goes to @drewcu -- and of course the edXposed devs! Go here and THANK this post. Full exchange is below, but please go thank @drewcu in that post.
_______
drewcu said:
Installed Magisk and edXposed and all is well.
Thanks!
Click to expand...
Click to collapse
ChazzMatt said:
First hearing about "edXposed". Quick Google search, sounds interesting, and some say it allows you to pass Safety Net, which regular Xposed (I use) doesn't. Is that true?
Which Magisk version are you installing with that?
Click to expand...
Click to collapse
drewcu said:
Latest Magisk 19.3.
YES, EdXposed absolutely passes Safetynet (both ctsProfile and basicIntegrity)! Install instructions here: https://github.com/ElderDrivers/EdXposed but see below for the specific EdXposed version I recommend using.
I personally use magisk-EdXposed-sandhook-v0.4.0.1_beta-SNAPSHOT-release.zip found https://www.lanzous.com/b642738. Newer Sandhook versions with resource hooking like v0.4.1.2_beta and v0.4.2.3_alpha (and the YAHFA versions too) found https://github.com/ElderDrivers/EdXposed/releases introduce some LAG for me that isn't present on 0.4.0.1. Haven't tried newer ALPHA versions like 0.4.3.7 but you are welcome to see if you experience the same lag. Would have to separately install both versions, start opening apps, clicking around, and counting time till the V30 responds to see the lag I am referring to. Is subtle but most noticeable in 0.4.1.2 and less so in 0.4.2.3.
The only Xposed module I use is GravityBox(O) and there is a version specifically for EdXposed -- 8.5.3.1-edxposed (https://github.com/GravityBox/GravityBox/releases/tag/v8.5.3.1-edxposed_o), although I updated to general version 8.5.4 (https://forum.xda-developers.com/xposed/modules/app-gravitybox-v8-0-0-beta-1-tweak-box-t3739929) and have no resource hooking problems with 0.4.0.1 like I thought there might be and had with general version 8.5.3. If you use any OTHER Xposed modules that require resource hooking, you will need to use an EdXposed version 0.4.1.2 or above which has resource hooking but also possibly some lag (perhaps none in the latest alpha I don't know).
So I stay on magisk-EdXposed-sandhook-v0.4.0.1_beta-SNAPSHOT-release because it works with the latest version of GravityBox no problem, has 0 lag unlike newer versions (I think an Oreo problem), and passes Safetynet just fine.
Not sure if some of the steps I took after reading a forum about Safetynet were necessary but I did them anyway -- namely:
1) EdXP Settings - Enable Black/White List
2) Black List Google Play Services and Google Play Store
3) Magisk Hide - ALL of Google Play Services
Enjoy!
Click to expand...
Click to collapse
TotallyAnxious said:
Thanks. I've been meaning to check out the new Xposed offshoots.
Click to expand...
Click to collapse
_________
@drewcu:
edXposed INSTRUCTIONS
Install instructions here: https://github.com/ElderDrivers/EdXposed but see below for the specific EdXposed version I recommend using.
I personally use magisk-EdXposed-sandhook-v0.4.0.1_beta-SNAPSHOT-release.zip found https://www.lanzous.com/b642738. Newer Sandhook versions with resource hooking like v0.4.1.2_beta and v0.4.2.3_alpha (and the YAHFA versions too) found https://github.com/ElderDrivers/EdXposed/releases introduce some LAG for me that isn't present on 0.4.0.1. Haven't tried newer ALPHA versions like 0.4.3.7 but you are welcome to see if you experience the same lag. Would have to separately install both versions, start opening apps, clicking around, and counting time till the V30 responds to see the lag I am referring to. Is subtle but most noticeable in 0.4.1.2 and less so in 0.4.2.3.
The only Xposed module I use is GravityBox(O) and there is a version specifically for EdXposed -- 8.5.3.1-edxposed (https://github.com/GravityBox/GravityBox/releases/tag/v8.5.3.1-edxposed_o), although I updated to general version 8.5.4 (https://forum.xda-developers.com/xposed/modules/app-gravitybox-v8-0-0-beta-1-tweak-box-t3739929) and have no resource hooking problems with 0.4.0.1 like I thought there might be and had with general version 8.5.3. If you use any OTHER Xposed modules that require resource hooking, you will need to use an EdXposed version 0.4.1.2 or above which has resource hooking but also possibly some lag (perhaps none in the latest alpha I don't know).
So I stay on magisk-EdXposed-sandhook-v0.4.0.1_beta-SNAPSHOT-release because it works with the latest version of GravityBox no problem, has 0 lag unlike newer versions (I think an Oreo problem), and passes Safetynet just fine.
Not sure if some of the steps I took after reading a forum about Safetynet were necessary but I did them anyway -- namely:
1) EdXP Settings - Enable Black/White List
2) Black List Google Play Services and Google Play Store
3) Magisk Hide - ALL of Google Play Services
Enjoy!

When I go to download the file, it's in, I assume, Chinese characters.
Any help.
Never mind, figured it out.

This is great. I'm so happy to have Gravity Box again.

I too had a problem with lag with newer versions of edxposed. I switched to the version recommend in the OP and all is well.

If you comfortable using "chinese" app. Taichi is simpler solution (personally), although not much modules currently supported. Both edxposed and taichi are available on magisk repo

Thanks @ChazzMatt, finally got around to installing Xposed again. Thank god for GravityBox!
edit: after playing around for a day, I'm disabling edx. I'm getting lag, force closes, unresponsive back button, and major battery drain. Sad to see the framework hasn't changed much in 1-2 years. It's not worth it for a single Xposed module.

Gravitybox system framework not respondinhlg.
On us996k
Guess I'm missing something?

qwas7899 said:
Gravitybox system framework not respondinhlg.
On us996k
Guess I'm missing something?
Click to expand...
Click to collapse
Edit; figured it out

qwas7899 said:
Edit; figured it out
Click to expand...
Click to collapse
share with the class.

Right. Didn't have riru-core module installed.

Thanks a lot for this guide . It's great to have xposed and safety net passing.

soo I tried to install edxposed sandhook (latest version), after a couple reboot, all went fine, but now I lost wifi and data connection (they cant be turned on), any ideas or fix? is it linked to that version of edxposed? I have a Lg ls998 converted to Us998h, thank you

LeTerrible said:
Just wanted to share my experience with NFC banking and FullHD working Netflix. Managed to delete everything google and installed Microg only (to get Gcam to work), my banking app, Netflix app, Canary EdXposed and it works flawlessly! Could never get FullHD and NFC banking to work previously with Xposed. Of note was the fact I am running Xprivacy, too. Just make sure you blacklist the apps in EdXposed and also hide them in Magisk and it all works
Hope this helps others as it really made my NoGapps/Rooted stock phone experiences significantly better.
Click to expand...
Click to collapse
Great.

I'm having trouble getting EdXposed to activate. I'm on a fresh clean install of the TWRP flashable version of US998 30b with Magisk 20.1 installed and working, and while i've got the Riru - Core module installed (v19.5), no matter which Riru - Ed Xposed module I use I get the following error message from EdXposed Manager 4.5.2 explaining why it's installed but not activated:
There seems to be a known issue("Wrong base directory: /mnt/expand/7f941a12-b7aa-4d2a-a664-f89a46b7d86c/user_de/0/org.meowcat.edxposed.manager") with your ROM.
Suggestions on where I go from here?

radwolf76 said:
I'm having trouble getting EdXposed to activate. I'm on a fresh clean install of the TWRP flashable version of US998 30b with Magisk 20.1 installed and working, and while i've got the Riru - Core module installed (v19.5), no matter which Riru - Ed Xposed module I use I get the following error message from EdXposed Manager 4.5.2 explaining why it's installed but not activated:
There seems to be a known issue("Wrong base directory: /mnt/expand/7f941a12-b7aa-4d2a-a664-f89a46b7d86c/user_de/0/org.meowcat.edxposed.manager") with your ROM.
Suggestions on where I go from here?
Click to expand...
Click to collapse
Solution Found. My EdXposed Manager had been installed to External Storage. It only works on Internal Storage.

Safety Net Fail w/ Gravitybox
It looks like as soon as I enable the Gravitybox module that you recommend, safetynet fails. Are you still passing with your setup (I'm wondering if there has been some update that this version of Gravitybox no longer passes)?
UPDATE: even though safetynet shows up as failing in Magisk, I am still able to use Google Pay, so maybe it is working? I'll update this post once I've tried using Google Pay to pay for something.
UPDATE again: after a couple of days, Google Pay showed a pop up message saying that it would no longer work. Uninstalling and reinstalling gets it working temporarily again it seems.

Dear @ChazzMatt
Should I install the old beta in the last page or the latest canary to avoid safety net and which versions is the best?

Note to everyone: installing xposed framework will trigger safetynet....and uninstalling it will do as well
And i don't know how to solve this except flashing a new rom

Does anyone have xPrivacyLua working on rooted stock Q?

Rooted with Magisk Canary, using EdXposed YAHFA, since Sandhook causes bootloop (hanging at G eternally). xPrivacyLua says "Module Not Installed Or Updated" Same installing from inside EdXposed and as .apk.
Other modules work if I install them, so EdXposed is generally working, but the only one I really care about is xPrivacy.
Is anyone using EdXposed, and are there any tricks or known gotchas with Q or the XL / Bonita that I am overlooking? I would really love to get xPrivacyLua running.
Edited to add:
Fixed by using EdXposed-YAHFA-v0.4.6.0_beta-release.zip

Question SafetyNet fails with LSPosed or EDXposed

I'm currently still using stock MIUI 12.5.5 (Android 11).
With Magisk, my phone could still pass SafetyNet without additional Magisk modules. However, I needed to install LDPosed or EDXposed in order to use the NoWakeLock xposed module. Well, I tried both and they install fine, but fail SafetyNet.
My understanding is that LDPosed is supposed to be more reliable and better compared to EDXposed, one of the reason being is that EDXposed will fail SafetyNet, whereas LDPosed won't...
I've tried using Magisk Props and a few SafetyNet related patches. They installed fine but I still fail SafetyNet. Those patches work fine for my other phone running on stock MIUI 12.5.3.
Just wondering has anyone tried setting up Xposed on their phone, specifically stock ROM, and got it to pass SafetyNet?

Installed " fix safety" works is LSposed.
i dont know if it works with edxposed
and check "Magisk hide" in Magisk manager.
Release v2.1.1 · kdrag0n/safetynet-fix
Changes Fixed under-display fingerprint on OnePlus devices (@osm0sis) Donate If you found this helpful, please consider supporting development with a recurring donation for rewards such as early ...
github.com

jc-b said:
Installed " fix safety" works is LSposed.
i dont know if it works with edxposed
and check "Magisk hide" in Magisk manager.
Release v2.1.1 · kdrag0n/safetynet-fix
Changes Fixed under-display fingerprint on OnePlus devices (@osm0sis) Donate If you found this helpful, please consider supporting development with a recurring donation for rewards such as early ...
github.com
Click to expand...
Click to collapse
Tried both already. Works on other phones but not on this one. Tried in both stock MIUI and GSI OctaviOS.

[q] Gpay on lineage 19.1

Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!

Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.

deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?

HW898 said:
Hey deathblade!
Thanks for helping me out on the other thread.
Just wanted to check in, did you use the official build or the unofficial one with the Pixel Goodies? I'm intending/hoping to have full functionalities of Google Pay using the unofficial build, but from your post it seems that I can't have the Pixel experience if I want the ROM to work with Google Pay?
Click to expand...
Click to collapse
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case

deathblade said:
I'm using the official build. I think the unofficial has everything needed to use Gpay and have some pixel things baked in. So might be worth a look in your case
Click to expand...
Click to collapse
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!

HW898 said:
Aite, I will try out the unofficial one and see if GPay works there too. Thanks for the headsup!
Click to expand...
Click to collapse
I just remembered, the unofficial is setup to pass safteynet out the box, but more maybe needed for Gpay to work. Once you flash it try it out, if you run into issues I can provide what I did to get Gpay working

deathblade said:
Nevermind, looks like it was an issue from having the pixelify module installed as well. After I removed it it started working just fine.
Click to expand...
Click to collapse
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?

HW898 said:
Hi there, trying out the official build after experiencing some problems on the unofficial one. Any alternatives to pixiel-ing the ROM?
Click to expand...
Click to collapse
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working

deathblade said:
Not that I've found, however I did notice if you install the pixelify module then uninstall it, it does seem to leave some stuff behind. Like I still have the option to use Hold for me and direct my call. So it might work out where you can install it to get the things you want then remove it to get Gpay working
Click to expand...
Click to collapse
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread

HW898 said:
I see... So these also means stuff like Now playing etc. will be gone too right?
Also, did you experience the problems I've faced in the unofficial build? sounds cannot change etc. as posted in main thread
Click to expand...
Click to collapse
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue

deathblade said:
Nope now playing is still there. I really only used it the module to force call screening to show up. But I have pretty much everything I remember from stock plus a few phone related goodies. I never tried the unofficial build but on the official I do not have that issue
Click to expand...
Click to collapse
I see... I will try installing the official one without magisk as I won't want to meddle with rooting stuff for now, will get back with results asap!

deathblade said:
Hey guys, has anyone gotten Gpay to work on lineage 19.1? I have done the following and have had very odd results. Firstly, I am passing safteynet and my device is registered as play certified in Google play store. I'm seeing where sometimes gpay won't open at all and when it does it says it is unable to load my payment methods.
Specs:
OS - linageOS 19.1 (latest build as of this post)
GAPPS - Mindthegapps (latest build as of this post)
Steps taken:
Installed magisk, enabled zygisk and rebooted
Installed magisk hide props module then rebooted
Installed shamiko module then rebooted
Installed universal safteynet fix (zygisk) then rebooted
Configured denylist in magisk checking GPS (all), and Gpay (all) rebooted
Changed device fingerprint with magisk hide props module to a certified one then rebooted
Additional steps taken:
I cleared data from GPS, play store and Gpay and rebooted
I tried a different device fingerprint and rebooted (clearing data like above afterwards and rebooting again)
I have done a complete fresh install of my OS and tried again from scratch.
I also tried seeing is renaming magisk would help at all, it didn't
It appears I'm getting nowhere with this. If anyone has gotten it to work and has some insight it's be greatly appreciated!
Click to expand...
Click to collapse
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?

HW898 said:
Just also wanted to clarify in the case I decide to install magisk, which module do you install exactly? All of them? Zygisk/hide props module/shamiko/universal safetynet fix?
Click to expand...
Click to collapse
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them

deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse
Aite thanks for the help mate! just installed but apparently, i couldn't find gapps despite sideloading it.. might have to reinstall again

Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
deathblade said:
Ok so here is the breakdown:
Zygisk is not a module, but an implementation method used by modules. Magiskhide props is used to change the device fingerprint to a valid one that registers as protected by google play. Shamiko is for hiding root from Google play services, and Gpay (and whatever other apps may need it). Universal safteynet fix is used to help pass google safteynet checks (security). Not listed is the pixelify module used to add pixel exclusive features but of course with it install it cause havoc on Gpay and other apps so once installed it should be uninstalled.
TLDR
Yes all of them
Click to expand...
Click to collapse

HW898 said:
Hmm safetynet fix seems to fail, can't pass cts profile.. any step by step guides by any chance?
Click to expand...
Click to collapse
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you

deathblade said:
That's where magisk hide props comes in. I don't have a full guide that I know of but I could do a quick wtite up tomorrow for you
Click to expand...
Click to collapse
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho

HW898 said:
I got it working after following a guide~
Unfortunately features like now playing isn't working. the rest is pretty much okay tho
Click to expand...
Click to collapse
You install the pixelify module? Also can you explain how it's not working?

deathblade said:
You install the pixelify module? Also can you explain how it's not working?
Click to expand...
Click to collapse
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs

HW898 said:
Nope, I didn't. Other than the modules to hide from banking apps as mentioned above, I installed a pixel launch module here to make it for pixel-like: https://forum.xda-developers.com/t/app-mod-pixel-launcher.4442077/
Other than that nothing else.
It doesn't;t work in the sense that it does not pick up music, even popular ones. The settings are there though, I can see them. It just doesn't identify any songs
Click to expand...
Click to collapse
This is the pixelify module I installed then removed, you can give it a try.
GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
Magisk module to enables pixel exclusive features and ui - GitHub - Kingsman44/Pixelify: Magisk module to enables pixel exclusive features and ui
github.com