As I am very disappointed that Brodit doesn't seem to support newer models, I was wondering if anyone has found 3D models to print a perfectly fitting holder (i.e. for the car).
Has anyone found something like that?
Do you still need this ? I can 3d model it if you want
Related
Hi,
I think it's likely I'm going to get a Milestone 2 when they are available, and wondered whether the things like cradles etc are compatible between the original Milestone/Droid and the Milestone 2/Droid 2?
I've seen a video where (I think) a Motorola employee said that the two are device compatible, but I've also seen a review and specs which state that the devices are slightly different sizes which makes me question that statement.
Any thoughts?
Cheers,
Steve.
Anyone? Is it that difficult a question?
I know the Droid dock works with the Droid 2. The other stuff I can't speak on though.
The Droid holster from Verizon fits the Droid 2 just fine. You might be able to find some on clearance at authorized dealers now that the original Droid is starting to be phased out.
Thanks for the replies guys.
Car / home dock, holster, shell holster will work with D2 shell. That's all. (Except universals lol)... oh, and also the battery.
Sent from my DROID2 using Tapatalk
I can also confirm the original Droid multimedia dock and batteries fit the Droid 2 [Global].
One thing that didn't fit were screen protectors, as the new bezel is everso slightly different in dimension - but with the Gorilla Glass I've found you don't need to bother with a protective film anyway.
Greetings,
I'm an Android newbie and just got my Galaxy S2 last week...
Consider me being a video game-o-holic you can understand why I developed a sever case of finger spasms/reduced manual functions over the past few days
I wonder if someone tried one of these "GAME CONTROLLER GRIP / GAME PAD CONTROLLER" seen at eBay (mostly for the iPhone though...).
Is there something suitable for the SG2 as well?
Perhaps the iPhone models can be modified for the Galaxy !?
Gal
(I can't post direct links yet..sorry...)
i think one is icontrolpad, not sure who makes it but seen a few youtube vids , there's another type i forgot the name
iControlPad will work, but I don't think it can grip the SGSII (despite having a couple of sizes of side-grips). The other one is the Phonejoy, I have one, works great (although only the emulators and Gamevil titles will work with it, enough for me, but perhaps not others).
Actually - I've been looking for a more "passive" controller similar to the images I posted.
It's probably no more than "ergonomically" designed cover for the phone, hence, fully compatible with any game/app - especially in horizontal mode...
Its cheap and seem to make playing more comfortable then holding a bare phone...
BTW - looking at the "Phonejoy" ... I couldn't help myself thinking its probably feasible to utilize a more "universal" solution to work with other ,commonly available, BT controllers - perhaps with few bits of code trickery from an XDA wizard
!?!?!
Wouldn't it be cool?
Did I miss a similar existing project?
Gal
You could try this: http://www.instructables.com/id/Making-a-Nintendo-SNES-controller-into-bluetooth-/
Basically, the guy took a BGP100's innards and interfaced it with an old SNES controller. Apparently it works quite well, and it seems he takes orders for building one for you.
iControlPad has a set of rubber sides coming soon that converts it into a plain Bluetooth controller without the clamps to hold a phone. SGS2-sized clamps aren't available yet.
Not quite sure what you meant by "passive" tho.
-Tj- said:
You could try this: http://www.instructables.com/id/Making-a-Nintendo-SNES-controller-into-bluetooth-/
Basically, the guy took a BGP100's innards and interfaced it with an old SNES controller. Apparently it works quite well, and it seems he takes orders for building one for you.
iControlPad has a set of rubber sides coming soon that converts it into a plain Bluetooth controller without the clamps to hold a phone. SGS2-sized clamps aren't available yet.
Not quite sure what you meant by "passive" tho.
Click to expand...
Click to collapse
If you don't mind me asking, how do you know that info about the iControlPad? Anybody here tried the iControlPad with a SGS2?
BTW I contacted the Phonejoy dealer, and apparently he is hoping to be selling a new model based on the PS3 controller (IE: with added analog sticks) early next month!
That info is available at the iControlPad website.
Hi There!
A few years ago I bought for my HD2, a air vent holder which has proved to be excellent. Recently I tried to move it to a new car, and broke a peice. I thought replacing the holder would be easy but most are junk compared to what I had. It's one bit that is broken and I am hoping someone might be able to look at this picture and tell me what this part is called or described as so I can just get another.
http://img198.imageshack.us/img198/913/20120121130259.jpg
From the original which is :
http://www.amazon.com/Buybits-Swivel-Mount-Samsung-Galaxy/dp/B004RAXCZO
I just one of those little spring clamps. I otherwise like my existing holder and I don't want one of the others which aren't as good (It's not about the price).
Anyone able to assist?
networkn said:
Hi There!
A few years ago I bought for my HD2, a air vent holder which has proved to be excellent. Recently I tried to move it to a new car, and broke a peice. I thought replacing the holder would be easy but most are junk compared to what I had. It's one bit that is broken and I am hoping someone might be able to look at this picture and tell me what this part is called or described as so I can just get another.
http://imageshack.us/photo/my-images...ringclamp.jpg/
From the original which is :
http://www.amazon.com/Buybits-Swivel...ata/B004XLDN9C
I just one of those little spring clamps. I otherwise like my existing holder and I don't want one of the others which aren't as good (It's not about the price).
Anyone able to assist?
Click to expand...
Click to collapse
both your links are dead.
Sorry about that, fixed now.
The first picture has changed from the original, but it's the little spring bits separate from the holder I'd like to replace, or if I can find something similar to the original I'll take that as well.
I don't like suction cap options.
No-one able to assist with locating a similar peice or item?
Thanks if you can assist.
Hi,
i think it would be much easier to buy a new holder, than to look for a spare part to your holder..
or try to search in ebay for similar ones... something form china, so you dont have to spend much money for shipping. there you should find hundreds of different mounting systems. for example this one:
http://www.ebay.de/itm/for-HTC-Incr...084?pt=LH_DefaultDomain_0&hash=item45fbeb7afc
i think its a similar one, though it doesnt have a spring system. but i think this small plug should fit with your system...
Hi, looking for good car front window holder for iOcean X7 Elite, it means 5" LCD. Have someone some holder in use and are satisfied with it? Ebay or chinese shop are allowed...
Florentpraha said:
Hi, looking for good car front window holder for iOcean X7 Elite, it means 5" LCD. Have someone some holder in use and are satisfied with it? Ebay or chinese shop are allowed...
Click to expand...
Click to collapse
I have tested every single car mount (all my reviews are here: http://forum.xda-developers.com/showthread.php?t=2192333), and found this one to suite my needs the best for Note 2: http://forum.xda-developers.com/showthread.php?t=2174449
The only problem you are in Prague, so you have limited choices where to buy it.
Thx for help. Arcon is not problem, Ebay save it...
Rsly said:
I found a holder in below link, very good
http://www.pipomall.com/360-degrees...es-and-tablets-black-p-673.html?cPath=583_598
Click to expand...
Click to collapse
Do you have it and actually use it? To be honest I have no idea how a bunch of small suction cups can hold a big/heavy phone or attach reliably to a textured case, etc. It looks like it could only work on a smooth surface without any texture or bump and definitely will not be able to accommodate a phone with a case. So it will be risky if your phone is attached naked to the back and you go over the bump where it can drop down in the car unprotected.
Hello, I'm looking for someone here who can provide me with a 3D scanned model of the Nexus 5.
I'm planning on 3D printing my own accessory designs for it, and as such need something to pull perfect measurements from. Plans include a slim case, and a logoless backplate. Other potentials include a wireless charging dock, and a car mount.
I will probably end up offering these for purchase, we'll see how things go first though.