These are my go to cases for phones.
https://www.amazon.com/Ringke-Fusio...91bf10&pd_rd_wg=pwwij&pd_rd_i=B08KSB8J97&th=1
Looks like there are issues with the alignment of the sensor hole on the rear?
Sean09 said:
Looks like there are issues with the alignment of the sensor hole on the rear?
Click to expand...
Click to collapse
How can you tell? I've ordered the same case.
https://img.xda-cdn.com/Hozv_lURE6RsrGBHxoIWrDAbqBU=/https://i.imgur.com/ZFiPmvJ.jpg
[/COLOR]
mzsquared said:
How can you tell? I've ordered the same case.
https://img.xda-cdn.com/Hozv_lURE6RsrGBHxoIWrDAbqBU=/https://i.imgur.com/ZFiPmvJ.jpg
Click to expand...
Click to collapse
Put your phone in it.
mzsquared said:
How can you tell? I've ordered the same case.
https://img.xda-cdn.com/Hozv_lURE6RsrGBHxoIWrDAbqBU=/https://i.imgur.com/ZFiPmvJ.jpg
Click to expand...
Click to collapse
Reading the reviews...seems a couple people the fingerprint hole didn't line up. Let us know how it works for you!
Sean09 said:
[/COLOR]
Put your phone in it.
Click to expand...
Click to collapse
COMTB said:
Reading the reviews...seems a couple people the fingerprint hole didn't line up. Let us know how it works for you!
Click to expand...
Click to collapse
Perfect fit, if the hole looks offset in this pic that's for more ergonomic finger tip placement, better angle. It's a great case, it can still be called 'slim' imo - it doesn't add much 'bulk'.
mzsquared said:
Perfect fit, if the hole looks offset in this pic that's for more ergonomic finger tip placement, better angle. It's a great case, it can still be called 'slim' imo - it doesn't add much 'bulk'.
Click to expand...
Click to collapse
My clear Sparin is offset. Someone screwed up the specs
mzsquared said:
Perfect fit, if the hole looks offset in this pic that's for more ergonomic finger tip placement, better angle. It's a great case, it can still be called 'slim' imo - it doesn't add much 'bulk'.
Click to expand...
Click to collapse
Thanks for the pic. My P5 arrives tomorrow and I already have that same case in Camo so I was a bit worried the sensor didn't line up. This gives me peace of mind.
I love this brand, they are literally the only brand who thought of the lanyard idea...wish it came in an all clear like they used to have.
This is a great case. I kind of wished the matte one didn't have a camo pattern. I would have gotten this instantly. My fingerprint cutout is lined up. I'm not sure of the people that have a "misaligned" cut out are taking the shadow of the cut out into consideration. It gives you the appearance that it's misaligned, but it really isn't.
Definitely my go too. But looking for something better this time. Haven't found it yet.
coremark said:
Thanks for the pic. My P5 arrives tomorrow and I already have that same case in Camo so I was a bit worried the sensor didn't line up. This gives me peace of mind.
Click to expand...
Click to collapse
Bought the camo one to. Looks sick. Hole lines up for me, no issues. it does feel a little better in hand with the case vs without, due to it being a smaller sized phone.
Related
Does anyone has any feedback on this case?
http://www.cruzerlite.com/cases/sam...roidified-a2-tpu-case-for-samsung-galaxy-note
I have a SGP case but it is white so I want to go with a black case and like the android design on those but want to make sure they dont have any flaws.
Thanks
Headphone jack seems to be not lined up on most of them
my review of it
Hi, yep I've got this case, its actually not that bad.
the best thing is that it is very comfortable to hold.
the grip on it is good. its cut outs are good, headphone jack cut out is good, but I would prefer if it was a bit bigger.
all other cut outs are perfect apart from the speaker ones which covers only a very small amount of the top of the speaker, but is not a problem.
here are a few pics.
sorry for the poor quality of pics, I was using my v. old nokia 5800.
Thanks.
I am going to be getting one and posting a review and video review for it.
shaolin95 said:
Thanks.
I am going to be getting one and posting a review and video review for it.
Click to expand...
Click to collapse
do you like it?
Droidguy987 said:
do you like it?
Click to expand...
Click to collapse
Still do not have it....super slow delivery
I have the Androidified Case and love it! It's super comfy (like the guy above me said) and it's just made to be easy to use. My only complaint is that the standard usb cable has a difficult time getting to the port due to the design of the case. Simple fix by pulling the piece up, but I don't like putting pressure on the port.
omac_ranger said:
I have the Androidified Case and love it! It's super comfy (like the guy above me said) and it's just made to be easy to use. My only complaint is that the standard usb cable has a difficult time getting to the port due to the design of the case. Simple fix by pulling the piece up, but I don't like putting pressure on the port.
Click to expand...
Click to collapse
ah that could be an issue indeed. Can't wait to test it. I only got my white case which I hate due to the apple look
i had the same problem regarding the usb, at first i had to force it in due to the way the cut out is, but after two days it seemed that the case just changed its shape and adjusted to allow the usb to fit in without forcing it. which for me I now have no problem with it.
Thanks for the feedback. I will keep it in mind while testing.
shaolin95 said:
Thanks for the feedback. I will keep it in mind while testing.
Click to expand...
Click to collapse
is your review ready?
Droidguy987 said:
is your review ready?
Click to expand...
Click to collapse
Just received two of the cases today but waiting for the third one that has the fancy designs to do it.
So far , I love the looks of the black one with the Android design on the back and inside.
Not too sure about the big area left open for the camera and flash but I will comment about all that when I post it.
Did you receive the last case ? i'm very intrested in it.
You think it still will fit in the pocket of your jeans now it is not so slippery anymore ?
CoopZor said:
Did you receive the last case ? i'm very intrested in it.
You think it still will fit in the pocket of your jeans now it is not so slippery anymore ?
Click to expand...
Click to collapse
Actually just got the shipping notification so I expect it here in time for a Friday review at least.
Yes it does fit fine and I like that it has extra grip on the sides of the case. That feels better than my previous one which is more slippery.
I will make sure to take enough pictures but so far I like it. I guess the wait is not bad that way I can do a review after a week of using the case to give a better perspective as opposed to a right our of the bag review.
I put my Note in a sock, it fits well, 10$ on ebay and looks not bad.
If i use this Cruzerlite, will i be able to put it in a sock again (maybe a bigger one ?)
Or dont you guys use a sock ? what do you use then ?
Hey guys,
So Im fully migrated and with lots of cases to review. Im gonna start the serie with the Cruzerlite androidified. This case is one of my favorite ones (next to the diztronic) Its a perfect match between budget and looks. ITs thin, has the android in the back and gives good protection.
Here it is guys!
http://youtu.be/1RxYErG50A0
i also love this case... fits very snug
i just got mine today, anyone else have the holes slightly off?
Thanks for the video review. The sides look a little flimsy though. I still will probably buy one just because it has Andy the Android on it
RotaryXperiment7 said:
i just got mine today, anyone else have the holes slightly off?
Click to expand...
Click to collapse
Mine are. I think the US Variants are a little thicker than the International models.
ReggieTee said:
Mine are. I think the US Variants are a little thicker than the International models.
Click to expand...
Click to collapse
No. You just need to fiddle with the case until everything lines up. There's a certain way to put on right.
zmore said:
No. You just need to fiddle with the case until everything lines up. There's a certain way to put on right.
Click to expand...
Click to collapse
This.
When i first got mine i thought it didnt quite line up right, but then i figured out how to put it on right.
Dont start with a corner, start at the top or bottom and line up the mic hole. The other end will line itself up.
The fit really is perfect.
kegacide said:
i also love this case... fits very snug
Click to expand...
Click to collapse
yep its super snug , which is a must for me!
faulkton said:
This.
When i first got mine i thought it didnt quite line up right, but then i figured out how to put it on right.
Dont start with a corner, start at the top or bottom and line up the mic hole. The other end will line itself up.
The fit really is perfect.
Click to expand...
Click to collapse
exactly, Its all about moving the case, Remember it is a tpu case therefore u can manipulate it a little bit. Dont get me wrong I thought the same thing, however after playing with it a little, it is just user error until placed correctly
Both the Cruzerlite and Amazon say that the cases are for the international version i9100. Can someone confirm if they fit the Tmobile T999? Thanks.
Sent from my SGH-T989 using xda app-developers app
taier said:
Both the Cruzerlite and Amazon say that the cases are for the international version i9100. Can someone confirm if they fit the Tmobile T999? Thanks.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
my video is with the tmo version
All Galaxy SIII are exactly the same physically. All cases and accessories ate interchangeable.
Sent from my SAMSUNG-SGH-I747
Btw - if you can't stand to look at the splotchy parts on the back of the translucent cruzerlites where it sticks to the phone, I followed another's recommendation by smearing a tiny bit of baby talcum powder inside the case, and it seems to work.
Maybe this is something cruzerlite could do at the factory? Talcum powder is a 1 on the mohs scale of hardness, so it's not an abrasive.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
zaisaroni said:
All Galaxy SIII are exactly the same physically. All cases and accessories ate interchangeable.
Sent from my SAMSUNG-SGH-I747
Click to expand...
Click to collapse
This!!! And it's actually a very good thing imho
Sent from my SGH-T999 using xda premium
zmore said:
Btw - if you can't stand to look at the splotchy parts on the back of the translucent cruzerlites where it sticks to the phone, I followed another's recommendation by smearing a tiny bit of baby talcum powder inside the case, and it seems to work.
Maybe this is something cruzerlite could do at the factory? Talcum powder is a 1 on the mohs scale of hardness, so it's not an abrasive.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
Damn, that's a good idea. I just tossed the cruzerlite to the side and got a speck case. I am going to have to try that. I like switching up cases every couple of weeks.
Pretty nice!
I just got mine today from Amazon.
Initials impressions is that it is quite nice. It fits pretty snug and looks nice on the phone. Especially if you like Andy the android. It is way easier to hold my phone now, especially with the side grips. I much prefer this soft TPU feel than to the hard plastic. There is a nice quality feel to the material.
My only complaint is the same as the users above me mentioned, the splotchy wet look on the back. Easily overcome with the talcum powder suggestion. Thanks zmore! Good looking out :highfive:
Phone is still quite thin after it is on. All in all, good buy, I highly recommend!
Now, back to flashing!
SmokeRob said:
I just got mine today from Amazon.
Initials impressions is that it is quite nice. It fits pretty snug and looks nice on the phone. Especially if you like Andy the android. It is way easier to hold my phone now, especially with the side grips. I much prefer this soft TPU feel than to the hard plastic. There is a nice quality feel to the material.
My only complaint is the same as the users above me mentioned, the splotchy wet look on the back. Easily overcome with the talcum powder suggestion. Thanks zmore! Good looking out :highfive:
Phone is still quite thin after it is on. All in all, good buy, I highly recommend!
Now, back to flashing!
Click to expand...
Click to collapse
do you have any pictures
I had the same problem with the cutouts, but you can move it enough to line them up more or less. The cutouts are so big, they do not feel precision cut at all.
I imagine the talc trick would also make the case easier to move on the phone.
Not great with invisible shields as the case can pull up the edges due to the tight fit.
Overall, great for 10 bucks though.
taier said:
Both the Cruzerlite and Amazon say that the cases are for the international version i9100. Can someone confirm if they fit the Tmobile T999? Thanks.
Sent from my SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
you want i9300 not i9100 btw
Droidguy987 said:
do you have any pictures
Click to expand...
Click to collapse
Actually, Amazon has some decent pictures up on their site.
Sorry, I can't post a link since I have so few posts. But if my attachments come through, there are a couple pictures.
Looks very close to the one I use. However mine's black. It's the poetic palette. I love it
i have the exact same one, the quality is great, it doesnt slip on your hand, very reasonable as well.
Just bought from ebay. Gray one is very nice, I hope the quality is the same as described in the video coz the one i got does not say MEIFENG
You should look at the case mate barely there case. My fav so far.
Sent from my HTC One using xda premium
Definitely feels nice in the hand but for some reason, my ones surface reacted badly to the centre console material in my car or it might have been the air freshner block, and the coating started wrinkling up and coming away.
It's clear plastic underneath so I may just scrape it all away!!!
Reckless187 said:
Definitely feels nice in the hand but for some reason, my ones surface reacted badly to the centre console material in my car or it might have been the air freshner block, and the coating started wrinkling up and coming away.
It's clear plastic underneath so I may just scrape it all away!!!
Click to expand...
Click to collapse
thats bad to hear, but hows the overall thiness or bulk it adds to the phone?
Magpir said:
thats bad to hear, but hows the overall thinness or bulk it adds to the phone?
Click to expand...
Click to collapse
Very good fit otherwise, and quite slim too. No complaints otherwise.
Reckless187 said:
Very good fit otherwise, and quite slim too. No complaints otherwise.
Click to expand...
Click to collapse
do u have more pictures to show thanks
Magpir said:
do u have more pictures to show thanks
Click to expand...
Click to collapse
The first picture in my other post was taken on the HTC One, these ones were taken on the Nexus 4.
The focus on this Nexus 4 sucks ****.
Phone too pretty, I refuse to put a case on it
dassub said:
Phone too pretty, I refuse to put a case on it
Click to expand...
Click to collapse
Agreed lol. I stick a case on it if I'm wearing my Raw Denim jeans. They're like sand paper every time I put my hand in my pocket, they scrape skin off my knuckles so imagine what they'd do to the phone over time.
yeah but i want case which closs ..
What happens when you drop a phone in this type of case, is the front protected?, does the case stay on the phone or just come flying off?.
Thanks
John.
Try this...........http://www.ebay.com/itm/300912737449?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Very sleek and smooth without being too obtrusive. It covers the top and bottom sides as well. Love it so far
sbihue said:
Try this...........
Very sleek and smooth without being too obtrusive. It covers the top and bottom sides as well. Love it so far
Click to expand...
Click to collapse
I purchased that same case. I actually bought a couple of them. I love it!!
Sent from my HTC One using xda premium
I got the clear TPU case loved it bad thing is it's not so clear anymore it's turning yellowish
Hello guys, I know that this might seem silly to some, but it's the only way I could get a decent screen protector on my V20. Problem is (at least in my country) that there aren't any good screen protectors in the market. Only one store sells them, and they don't stick to the screen at the top and bottom edges where it's curved, so I took some measures and drew a template in autocad, bought an Armorsuit protector (ipad size) and cut it. It fit PERFECTLY and it's case friendly too. I hope this helps
hernanmcarg said:
Hello guys, I know that this might seem silly to some, but it's the only way I could get a decent screen protector on my V20. Problem is (at least in my country) that there aren't any good screen protectors in the market. Only one store sells them, and they don't stick to the screen at the top and bottom edges where it's curved, so I took some measures and drew a template in autocad, bought an Armorsuit protector (ipad size) and cut it. It fit PERFECTLY and it's case friendly too. I hope this helps
Click to expand...
Click to collapse
Thx for sharing.
Peeps are talented.
Do you think you could post few pictures please...
netgar said:
Thx for sharing.
Peeps are talented.
Do you think you could post few pictures please...
Click to expand...
Click to collapse
Sure can do, tomorrow i'll take them with my gf's phone camera so you can see it clearly, but it fits PERFECTLY. I use it with a Ringke Fusion Case and there's no lifting in the edge problem or anything like that. Like I said before this might seem quite useless to most, in the US you can easily get the Armor Suit for the V20, but here it's almost impossible so I had to find the way.
hernanmcarg said:
Sure can do, tomorrow i'll take them with my gf's phone camera so you can see it clearly, but it fits PERFECTLY. I use it with a Ringke Fusion Case and there's no lifting in the edge problem or anything like that. Like I said before this might seem quite useless to most, in the US you can easily get the Armor Suit for the V20, but here it's almost impossible so I had to find the way.
Click to expand...
Click to collapse
What tool did you use to make a cuts?
netgar said:
What tool did you use to make a cuts?
Click to expand...
Click to collapse
A common box cutter. I guess you could use good scissors too tho.
7
hernanmcarg said:
A common box cutter. I guess you could use good scissors too tho.
Click to expand...
Click to collapse
Looking forward to see pictures
Are you going to post some pictures?
Anybody ever hear of a Stomob case ?
https://stomob.com/products/smart-view-flip-mirror-case-for-oneplus-7-7-pro
Looks kind of interesting but I wonder over time ?
AstroDigital said:
Anybody ever hear of a Stomob case ?
https://stomob.com/products/smart-view-flip-mirror-case-for-oneplus-7-7-pro
Looks kind of interesting but I wonder over time ?
Click to expand...
Click to collapse
Tried one the same binned it straight away. Glass on glass is asking for trouble. Not practical goes no where near far enough. Avoid.
Sent from my GM1913 using Tapatalk
Thanks...
I ordered this one from their website :
https://stomob.com/products/luxury-clear-plating-case-for-oneplus-7-7-pro?variant=28807103250496
I'll give my review as soon as i get it Seems beautiful !
gregou said:
I ordered this one from their website :
https://stomob.com/products/luxury-clear-plating-case-for-oneplus-7-7-pro?variant=28807103250496
I'll give my review as soon as i get it Seems beautiful !
Click to expand...
Click to collapse
Isn't that just the plated tpu you can get for £2ish on ebay?
fr0d0#2 said:
Tried one the same binned it straight away. Glass on glass is asking for trouble. Not practical goes no where near far enough. Avoid./QUOTE]
Wish I would have read this post first. I bought that Stomob case. It does look good with the translucent cover but within 6 hours of putting it on I had 3 large scratches across the screen of my brand new OP7 Pro. The hard plastic cover (it isn't glass - likely polycarbonate) grinds into your screen. I'm super bummed and will see if Stomob stands behind their product at all that they claim ensures screen protection.
I've used clamshell cases on other phones for years without ever getting a scratch - this case causes scratches - avoid at all costs.
Click to expand...
Click to collapse
Thanks y'all for this info, the adds are awesome, but not the case. I'm going to keep using the provided case until I can find one I really want. It'll have to be a clear back as I'm not covering my Nubia up!!
chefster74 said:
Thanks y'all for this info, the adds are awesome, but not the case. I'm going to keep using the provided case until I can find one I really want. It'll have to be a clear back as I'm not covering my Nubia up!!
Click to expand...
Click to collapse
Supcase. I really like mine.
https://www.supcase.com/oneplus-7-pro-unicorn-beetle-style-slim-case
ULJ said:
Supcase. I really like mine
Yeah totally agree. This case rocks and at half the cost. I looked at a few other cases similar to this stomob one but was concerned about the effects, if any, of the magnets on reception. Can't go wrong with a Supcase tho... Got mine off Amazon at under $13.
Click to expand...
Click to collapse
Am I really missing something or are all the cases on their site stuff you can get for a few pounds on ebay? But at ten times the price?
ULJ said:
Supcase. I really like mine.
https://www.supcase.com/oneplus-7-pro-unicorn-beetle-style-slim-case
Click to expand...
Click to collapse
Anyone ever thought about modding this case, and cases like this, to remove just the clear backing so that only the frame is left?
roaduardo said:
Anyone ever thought about modding this case, and cases like this, to remove just the clear backing so that only the frame is left?
Click to expand...
Click to collapse
Look for rhinoshield
https://rhinoshield.io/pages/shop/O...ory=crashguard&prod=oneplus-7-pro-bumper-case
Meaningful said:
Look for rhinoshield
https://rhinoshield.io/pages/shop/O...ory=crashguard&prod=oneplus-7-pro-bumper-case
Click to expand...
Click to collapse
No. They're the only option for this kind of case. That sucks. Which is why I question the idea of modding other cases in order to have a bumper-only case. RS cases are just not that great, IMO.
roaduardo said:
No. They're the only option for this kind of case. That sucks. Which is why I question the idea of modding other cases in order to have a bumper-only case. RS cases are just not that great, IMO.
Click to expand...
Click to collapse
Agree. They're not. I used them on my 6p and if you drop the phone, it's a scuff mark. The paint job peels quite easily as well.
ULJ said:
Supcase. I really like mine.
https://www.supcase.com/oneplus-7-pro-unicorn-beetle-style-slim-case
Click to expand...
Click to collapse
Got my Supcase yesterday, love it!
chefster74 said:
Got my Supcase yesterday, love it!
Click to expand...
Click to collapse
Same here ??