A505F Emergency Calls Only - Samsung Galaxy A50 Questions & Answers

Hello everyone!
I'm really new here. I hope this is the right place to ask.
Last year I bought an A505F from the internet. Unfortunately I got (kind of) scammed, since the device was from abroad and it was rooted. As I further found out, the current IMEI is from another phone. So I couldn't sell it because people really look at that stuff (smh why didn't I ). So I decided to make the best of it.
Last week I decided to Update the firmware. I don't know spesifically what kind of firmware there was before. After a bit research and hoping not to break anything, I downloaded the official firmware, matching the version on the phone, from Sammobile (A505FDDS2ASI5) and flashed it with Odin. I tried but didn't succeed to flash the latest firmware at that time. Some italian guy on youtube said that the firmware you want to flash has to match with some version of something on the phone. So I did that. Spesifically I extracted the zip, and assigned the BL, AP, CP and CSC (not HOME) files each to their corresponding field in the gui and hit Start to flash it after I put the phone into download mode. It successfully loaded the firmware. After I did that, I upgraded the phone via OTA to Android 10. I was very happy that I finally had Android 10 on my A50 and could do this fancy multi-tasking gesture from the navigation bar . Because I was the whole time at home, connected to WiFi, I didn't notice the problem. When I went out, I saw that I have no service. No call, no mobile data, etc. So my investigation continued. I then found out that there is something with the modem (?), the CP file I am flashing (?), that it has to be up to date and that OTA updates don't update that? So I went ahead and downloaded the latest firmware from Sammobile (A505FDDU5BTJ2) and flashed it as described before. Both times I carefully selected the version matching my region (TR). Unfortunately that didn't help either.
So now I am stuck with the latest firmware and an "Emergency Calls Only" warning, not being able to do anything. The IMEI is still there. I can check it with *#6...
When I go into Network Operators under Mobile networks and hit "select manually", I get "Error while searching for Network". And when I hit "select automatically", I get "Unable to connect. Try Later."
Other than that, everything seems to be okay with the phone.
I would really appreciate any help. I'm out of town thus, not gonna be able to give it to some service.
Also, all this firmware, partition, modem, etc.pp.-world... it's really exhausting to understand. Everybody is saying something else. There really should be a unifying approach to this..
Sorry for the long post

tensarflow said:
tensarflow said:
Hello everyone!
I'm really new here. I hope this is the right place to ask.
Last year I bought an A505F from the internet. Unfortunately I got (kind of) scammed, since the device was from abroad and it was rooted. As I further found out, the current IMEI is from another phone. So I couldn't sell it because people really look at that stuff (smh why didn't I ). So I decided to make the best of it.
Last week I decided to Update the firmware. I don't know spesifically what kind of firmware there was before. After a bit research and hoping not to break anything, I downloaded the official firmware, matching the version on the phone, from Sammobile (A505FDDS2ASI5) and flashed it with Odin. I tried but didn't succeed to flash the latest firmware at that time. Some italian guy on youtube said that the firmware you want to flash has to match with some version of something on the phone. So I did that. Spesifically I extracted the zip, and assigned the BL, AP, CP and CSC (not HOME) files each to their corresponding field in the gui and hit Start to flash it after I put the phone into download mode. It successfully loaded the firmware. After I did that, I upgraded the phone via OTA to Android 10. I was very happy that I finally had Android 10 on my A50 and could do this fancy multi-tasking gesture from the navigation bar . Because I was the whole time at home, connected to WiFi, I didn't notice the problem. When I went out, I saw that I have no service. No call, no mobile data, etc. So my investigation continued. I then found out that there is something with the modem (?), the CP file I am flashing (?), that it has to be up to date and that OTA updates don't update that? So I went ahead and downloaded the latest firmware from Sammobile (A505FDDU5BTJ2) and flashed it as described before. Both times I carefully selected the version matching my region (TR). Unfortunately that didn't help either.
So now I am stuck with the latest firmware and an "Emergency Calls Only" warning, not being able to do anything. The IMEI is still there. I can check it with *#6...
When I go into Network Operators under Mobile networks and hit "select manually", I get "Error while searching for Network". And when I hit "select automatically", I get "Unable to connect. Try Later."
Other than that, everything seems to be okay with the phone.
I would really appreciate any help. I'm out of town thus, not gonna be able to give it to some service.
Also, all this firmware, partition, modem, etc.pp.-world... it's really exhausting to understand. Everybody is saying something else. There really should be a unifying approach to this..
Sorry for the long post
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Did you find any solution yet?
Facing the same problem...

Related

[Q] Phone doesn't connect to GSM

Hello.
So my N7100 doesn't connect to mobile network. No voice calls, text messages or mobile internet. Wifi works just fine, although signal seems to be a little weaker (maybe just my imagination).
What I did and how it happened:
I got sick of Samsung being assholes and not pushing out software updates, so I decided to flash some custom ROM. I choose CM, because they had that "one click installation", so I didn't have to do a lot of work. After a week of using CM I decided that it sucks and wanted back my original android with all gimmicks from Samsung, mostly because battery life with CM was terrible, not even one day. And that's when everything went downhill. I downloaded and installed firmware for Baltic region, because I live here and I bought my phone here. From that moment my phone stopped being phone and evolved into wifi only tablet. After being very pissed and trying to flash couple different roms I gave up. Found my phones original box user manual and other papers. It turns out that my phone is made for Hungary region. So shop where I bought it must have imported wrong models (most likely cheaper for bigger profit). Flashing original for Hungary made firmware doesn't resolve this issue.
Guys, I really need help. I just want to return to stock - original firmware and reset flashing counter. Please help, and if possible in layman's terms...
EddsLV said:
Hello.
So my N7100 doesn't connect to mobile network. No voice calls, text messages or mobile internet. Wifi works just fine, although signal seems to be a little weaker (maybe just my imagination).
What I did and how it happened:
I got sick of Samsung being assholes and not pushing out software updates, so I decided to flash some custom ROM. I choose CM, because they had that "one click installation", so I didn't have to do a lot of work. After a week of using CM I decided that it sucks and wanted back my original android with all gimmicks from Samsung, mostly because battery life with CM was terrible, not even one day. And that's when everything went downhill. I downloaded and installed firmware for Baltic region, because I live here and I bought my phone here. From that moment my phone stopped being phone and evolved into wifi only tablet. After being very pissed and trying to flash couple different roms I gave up. Found my phones original box user manual and other papers. It turns out that my phone is made for Hungary region. So shop where I bought it must have imported wrong models (most likely cheaper for bigger profit). Flashing original for Hungary made firmware doesn't resolve this issue.
Guys, I really need help. I just want to return to stock - original firmware and reset flashing counter. Please help, and if possible in layman's terms...
Click to expand...
Click to collapse
Press *#06# and see if your EMEI is fine... If it says something like 000000000049 it seems to be bugged and you can try this solution:
I flashed the firmware N7100XXDMF2_N7100OLBDMD2_XME using ODIN PC and follow the below using root explorer:
- copy /efs/ to the sdcard
- delete /efs/
- reboot (after reboot I got the yellow recovery mode window floating over, no lock screen, and pressing power button turns the phone off directly)
- /efs/ will be autocreated again. copy the efs folder from the sd card to / (root explorer will tell you that the folder already exists and it will merge them)
- reboot
PS: I did not have an /efs/ backup before applying the above.
Click to expand...
Click to collapse
I saw from another post. Im going to try this too since Im having the same problem as you.
Find your ROM here: http://www.sammobile.com/firmwares/1/?model=GT-N7100&pcode=CHE#firmware I selected Chile Entel, but you can choose your country and company, it is the original ROM and it should fix our problem, Im downloading the ROM by now.
To use Odin, just put your phone in download mode (vol up/down + home + power) and then plug in to your PC, open Odin and at "PDA" select your ROM, then put start and just wait a few minutes and it should be working again...
After this, you should make a back up of your EFS file using a root explorer and then flash with any ROM you want (Im trying Ditto 3, it seems to be a cool jelly bean) and after this flash, you should put your new EFS file... Just the problem that Im facing is how to put this backup since the EFS is a folder being readed all the time, so there should be a program to do this, but I cant figure this out yet.
My phone doesn't have any IMEI any more. "null/null" is value given by my phone after requesting IMEI. I already flashed original ROM, problem is still here.
About /efs/ I could backup it with "File Manager"app from google play, but I can't delete it, because it is in read only.
EddsLV said:
My phone doesn't have any IMEI any more. "null/null" is value given by my phone after requesting IMEI. I already flashed original ROM, problem is still here.
About /efs/ I could backup it with "File Manager"app from google play, but I can't delete it, because it is in read only.
Click to expand...
Click to collapse
Somehow you will have to access to edit it and you will be able to solve that problem... Otherwise go to technical service.
kito2 said:
Somehow you will have to access to edit it and you will be able to solve that problem... Otherwise go to technical service.
Click to expand...
Click to collapse
In order to delete /efs/ you have to be rooted, when you flash factory rom you loose root privileges.
EddsLV said:
In order to delete /efs/ you have to be rooted, when you flash factory rom you loose root privileges.
Click to expand...
Click to collapse
After flash factory rom is easy to make root again hehe.. Anyways keep reading and maybe you will find another solution, you can't be the only one who had that problem... Good luck my friend.
Try this link http://forum.xda-developers.com/showthread.php?t=1896696
kito2 said:
After flash factory rom is easy to make root again hehe.. Anyways keep reading and maybe you will find another solution, you can't be the only one who had that problem... Good luck my friend.
Click to expand...
Click to collapse
Thanks. So I rooted my phone and did all than you wrote above - copied, deleted, replaced. It didn't helped and now I have that yeleow recovery window all the time :/

[Q] Note 2 Root fails - seems like I've tried everything.

Ok, first of all, new to rooting and all that follows. However, I'm not new to forums and if this is in the wrong category, or if I overlooked a similar post, I am sorry. Feel free to redirect me to wherever you see fit. I know just too well how similar posts can be annoying, but I feel like I've exhausted Googlesearching and looked everywhere I can think of.
So, I have a Note II. N7100, Android 4.4.2 and I want to root it. Googlesearching has found me a lot of nice looking ROMs, and besides looks the added functions tempt me. Wont be long until I upgrade to a Note 4 or 5 anyway, figure I might as well. For what its worth, I live in Norway, and AT&T does not exist over here, nor does any other major american carrier. USB debugging was on the entire time.
I got the Odin V3.10, and appropriate clockworksmod files, and thought everything was peaches. Into download mode (after backing up ofc), Odin finds it, I upload everything and Odin says "PASS" in nice, green letters. When it reboots, it looks the same as before, but.. "Unfortunately, SuperUser has stopped", Titanium backup does not work since it apparently isnt rooted. Root Checker says the same. However, when checking for updates my phone displays "The operating system on your device has been modified in an unautorized way. Try downloading software updates using Samsung KIES on your PC, or visit a customer service center."
Read alot about devices having to be unlocked from carrier, however all google searches on "how to check for carrier lock on Note 2" yields numbersequences I have to input into the dialler and dial. None of the sequences give anything other than "Connection problem or invalid MMI code". I honestly dont remember if its carrier locked or not.
I came across an article here on XDA saying that with the later versions of android, KNOX has become an issue when trying to root, but someone had found a way around it. I downloaded MJ5BLPatch.tar.md5, uploaded to my phone via Odin, and here it fails, looses connection with the device and cant reconnect. Phone displays something alon the lines of "Invalid magic code" or the similar in red text.
I am the newb here, looking for help, and if I screwed up big somewhere I am cool with a little flaming. I just want to squeeze this for what use I can before upgrading, and probably rooting that too.
Any help as to how I can root it and load custom ROMs? I appreciate any and all help, sincerely.
Forget that MJ5 bootloader related stuff.
Reflash CWM using Odin and untick auto reboot, run through and reboot manually.
After reboot into recovery flash SuperSu.zip, start supersu after reboot system and disable knox by following the advices from app.
Thank you very much. i feel exceedingly stupid, I had been using the guide found on Note2root.com, when I applied step by step from this guide (http://forum.xda-developers.com/showthread.php?t=2143479) everything worked out. hope this may be of help to anyone having the same issues.
Again, thank you very much for your help.

First time messing with my phone, and it looks super soft bricked.

Hello, first timer here. I have never tried rooting or anything, but today I finally decided to... and messed it up.
Verizon Samsung Note 2 SCH-i605 (yes, still.)
Got it on July 2nd, 2013, so I believe it was build 4.1.1 kernel 3.1? Not too sure on the legalities
Completely unrooted and unmodded
I was using kingo root and everything was fine until it hit about 52% on the rooting process when my computer lost connection with my phone. Since, it gave me the "Firmware upgrade encountered an issue" problem. So then I google-fu'd and followed directions of:
http://forum.xda-developers.com/showthread.php?t=2040264
http://forum.xda-developers.com/showthread.php?t=2120726
http://forum.xda-developers.com/showthread.php?t=2582290
http://forum.xda-developers.com/showthread.php?t=2024207
etc.
and used Odin 3.10.7 (and 3.10.0 just in case, both on and off admin mode cause why not) on every single md5 available in all those links and the one from sammobile.com for sch-i605.
And each time, I would either received failure on "sboot.bin" or receive the "System Software Not Authorized" error if succeeded (it was stuck in bootload? too, kept flashing the logo then the error message). The VERY first time, however, it actually brought me to that page where I'm allowed to press things like erase cache, factory reset, or reboot my phone. There, I chose all those options in the order I've listed them. And ever since I haven't seen that screen again.
My issue seems to be every problem I can find put together, and can't seem to resolve it with my skills alone. I honestly don't care about recovering my data (which I believe is impossible now anyway) or rooting my phone. I just want it to turn on again.
Thanks in advance.
p.s. getting a new phone isn't an option currently
-edit-
Checked my verizon wireless software upgrade assistant for some info, and it says "Up to date" and "Version ND3" if that means anything to you pros out there.
jk1982 said:
Hello, first timer here. I have never tried rooting or anything, but today I finally decided to... and messed it up.
Verizon Samsung Note 2 SCH-i605 (yes, still.)
Got it on July 2nd, 2013, so I believe it was build 4.1.1 kernel 3.1? Not too sure on the legalities
Completely unrooted and unmodded
I was using kingo root and everything was fine until it hit about 52% on the rooting process when my computer lost connection with my phone. Since, it gave me the "Firmware upgrade encountered an issue" problem. So then I google-fu'd and followed directions of:
http://forum.xda-developers.com/showthread.php?t=2040264
http://forum.xda-developers.com/showthread.php?t=2120726
http://forum.xda-developers.com/showthread.php?t=2582290
http://forum.xda-developers.com/showthread.php?t=2024207
etc.
and used Odin 3.10.7 (and 3.10.0 just in case, both on and off admin mode cause why not) on every single md5 available in all those links and the one from sammobile.com for sch-i605.
And each time, I would either received failure on "sboot.bin" or receive the "System Software Not Authorized" error if succeeded (it was stuck in bootload? too, kept flashing the logo then the error message). The VERY first time, however, it actually brought me to that page where I'm allowed to press things like erase cache, factory reset, or reboot my phone. There, I chose all those options in the order I've listed them. And ever since I haven't seen that screen again.
My issue seems to be every problem I can find put together, and can't seem to resolve it with my skills alone. I honestly don't care about recovering my data (which I believe is impossible now anyway) or rooting my phone. I just want it to turn on again.
Thanks in advance.
p.s. getting a new phone isn't an option currently
-edit-
Checked my verizon wireless software upgrade assistant for some info, and it says "Up to date" and "Version ND3" if that means anything to you pros out there.
Click to expand...
Click to collapse
Greetings,
Thank you for using XDA Assist. To get you the best possible assistance, I'm going to move this thread to your device's Q&A forum. Good luck!
install kies and try flashing rom. do you have rom from i.e. sammobile? use different odin versions and do not mark repartition
yaro666 said:
install kies and try flashing rom. do you have rom from i.e. sammobile? use different odin versions and do not mark repartition
Click to expand...
Click to collapse
KIES is unable to read my phone (tried the bottom 3 versions of it), and I've tried running Odin 3.07 and unchecked repartition for every stock and restore md5s I had for my phone... the ones that didn't fail sboot.bin are still giving me unauthorized error.
I'll keep trying all the combinations, but it seems moot at this point.

Need help updating with odin. I've tried everything

I'm so lost on how to use this forum, and I'm really stuck. I've got an sm-g986u on at&t, it's not got an update since June. I'm trying to update it via odin. I don't use a sim card in it as it's not my main phone so I can't get ota updates, and smart switch doesn't work either. I would just throw a sim in it but I guess I bought a blacklisted phone, I didn't realize until long after I couldn't return it. Anyway, if I use frija it detects a T-Mobile update for it, but it won't download. It goes for a bit and then drops to zero mb/s. I downloaded the update myself and when I enter the files into oidn, it freezes after I select the cp file and says not responding indefinitely. I just want to get this thing to one ui 2.5. I cannot find any guide for how to do this. I've managed to confirm odin 3.14.4 is the right version of odin to use, but I can't find what the correct update should be, or a good source for it, as sam mobile's free server has been down. Can anyone help? Thank you in advance.
EDIT I found a thread explaining the process pretty well but now I have a new problem. I downloaded the suggested 3.14.13b version of odin, which is fine, and I downloaded the latest u1 update from sammobile. I'm getting an error when unzipping the ap file. I've tried the stock windows unzipper, 7 zip and 9 zip, all three error out. I tried to add the file in odin to see if it would go through it not and it just freezes, as it did before. Any help?

Problem with Odin, flashing stock firmware

Hello!
I'm a total novice in this and I admit that maybe I shouldn't have gotten into it. Here's my story: I have a Samsung Galaxy S9 (SM-G960F) and I bought it in France (I don't know what kind of model it is exactly). Last June I had installed crDroid 6.7 without any problem, and yesterday I thought that it's been a long time since I updated the OS so I wanted to upgrade to crDroid 7.2. But this upgrade didn't suit me at all because I hadn't installed the right GApps packages.
So I formatted everything thanks to TWRP but the mistake is that I checked everything in "Advanced wipe" so I find myself without any firmware nor anything. I searched for a few hours for a stock G960F firmware compatible with my phone blindly because I don't know my precise model. On Odin, it's always blocked at the "recovery.img" step. The only time it went further than that, there was a "fail" and an error was and is still displayed: "An errror has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software".
Here's what I'm wondering: did I totally brick my phone and it's a waste of time? Or I'm just looking wrong and I downloaded the wrong firmware all the time. (I'd like to go back to the basic Galaxy OS, i.e. One UI, but I have to install the stock firmware first, right?)
Thanks for reading, I know it's stupid of me to want to do something without a tutorial or anything, sorry
Zealest said:
Hello!
I'm a total novice in this and I admit that maybe I shouldn't have gotten into it. Here's my story: I have a Samsung
Click to expand...
Click to collapse
Your exact model will be SM-960F, you can check this in 'Download Mode'. I'm sure you know how to get into that as you mention you're using Odin. Third line down, look for 'Product Name'.
If you can get into Download Mode, then its likely not hard bricked.
Try getting your firmware from sammobile, take a few hours in free mode.
vinokirk said:
Your exact model will be SM-960F, you can check this in 'Download Mode'. I'm sure you know how to get into that as you mention you're using Odin. Third line down, look for 'Product Name'.
If you can get into Download Mode, then its likely not hard bricked.
Try getting your firmware from sammobile, take a few hours in free mode.
Click to expand...
Click to collapse
by exact model, I mean like the "PDA" or "CSC" ; by the way I don't really know what this stands for and what is it exactly.
On SAMMobile should I download a firmware of my country (France) or something else? is it that important?
** The downloads are extremely slow, shouldn't I download my firmware through a third-party software like Frija ?

Categories

Resources