Alexenferman is not responsible for any damages or bricks made to your device. Please do some research if you have any concerns about rooting, its features and downsides. You are choosing to make these modifications, you should blame yourself for any mistakes you make.
Rooting may require a factory reset, please backup your data. Rooting will void your device warrany. By rooting your device, you will not be able to install OTA updates on your phone.
US carrier specific devices such as Verizon and Sprint might not be bootloader unlockable, therefore, not rootable.[/B]
You will need:
Platform Tools (Download from here)
Motorola Drivers
Windows or Linux PC
Bootloader Unlocked Moto E 2020
Your phone must be bootloader unlocked. Rooting your phone and not unlocking the bootloader will result in a soft brick.
Download the latest Magisk Manager APK from Github: https://github.com/topjohnwu/Magisk/releases/download/manager-v8.0.0/MagiskManager-v8.0.0.apk
Install the APK file. Make sure to enable "Unknown Sources" in the Settings app
Patching the boot image
To retrieve the boot image in order to patch it, you will need to download the stock ROM for your specific variant.
Download the ROM from your variant from here: https://mirrors.lolinet.com/firmware/moto/ginna/official/
To check which region is your device, go to Settings > About Phone > Software Channel.
After downloading, open the ROM zip file with an archive manager.
Extract the boot.img file only.
Transfer the boot.img file on your phone.
On your phone, open the Magisk app.
Select "Install" > "Install" > "Select and Patch a File"
Locate the boot image in the internal storage on your phone. Select the boot.img file.
Transfer the magisk_patched.img file on your computer.
Rooting the device
Boot the device into fastboot mode by holding the [Volume Down] and [Power] buttons.
Connect your phone to your PC.
On your PC, open a fastboot console window.
Type:
Code:
fastboot devices
Your phone serial number should be displayed along with the word "fastboot" or "device" in the console.
Now, type the following commands:
Code:
fastboot flash boot_a patched_boot.img
fastboot flash boot_b patched_boot.img
Replace patched_boot.img with the path to your boot image we patched previously.
To reboot the device, type:
Code:
fastboot reboot
Once the device rebooted, open the Magisk app.
If you see the "Magisk is installed" message, you have successfully rooted your device!
You are done!
To view instructions with images, follow these instructions: https://www.alexenferman.com/articles/MotoE2020/root-moto-e-2020-magisk
I can confirm this works, I was about to give up on root or TWRP until I saw this. I'm now rooted, but I still can't find a download link for the latest TWRP for the Ginna model.
Hypercore said:
I can confirm this works, I was about to give up on root or TWRP until I saw this. I'm now rooted, but I still can't find a download link for the latest TWRP for the Ginna model.
Click to expand...
Click to collapse
Me neither, can anyone provide a TWRP for ginna?
I eventually found it after a ton of digging. I've uploaded it to my drive to assure the link stays active for anyone else who may need it.
For peace of mind, here's the VirusTotal scan HERE.
And here is the link to twrp-3.4.0-10_0-ginna HERE.
Hypercore said:
I eventually found it after a ton of digging. I've uploaded it to my drive to assure the link stays active for anyone else who may need it.
For peace of mind, here's the VirusTotal scan HERE.
And here is the link to twrp-3.4.0-10_0-ginna HERE.
Click to expand...
Click to collapse
Confirmed working. Tyvm!
Before I brick my phone. Can anyone confirm if the Tracphone version XT2052DL is rootable?
I'd like to know, too. Can we root our Tracfone XT2025DLs? Anyone successful?
dragonfire0501 said:
Before I brick my phone. Can anyone confirm if the Tracphone version XT2052DL is rootable?
Click to expand...
Click to collapse
Ranthalion75 said:
I'd like to know, too. Can we root our Tracfone XT2025DLs? Anyone successful?
Click to expand...
Click to collapse
I have one too and I've tried to unlock the bootloader however Motorola's website says the bootloader for this phone is not unlockable. It seems like this is what's preventing me from being able to install a different firmware like the stock one or root the device.
I do not know if there is any sort of workaround for this
For some reason on a Moto E, after rescuing using the Moto rescue assistant and then using
you guys can also use OFox Recovery and swipe magisk to root
Thank you. I used this guide to root my Moto E
QPGS30.82-135-2_Root.img
This method works well for QPGS30.82-135-2, but I just attempted it with QPGS30.82-135-9 and unfortunately the Magisk patched boot image will not work. I tried it 3 times, re-patching boot image each time. I suppose Motorola updated something in android to block this?
i can't get this to work at all, i cannot find a matching stock firmware being qpg30.82-135, there's no extra S and nothing else after the 135, got this phone from my motorola insiders rewards and now it's bootlooping after trying the 135-2 patched image
Has anyone been able to root and hopefully install a custom recovery on the lastest update? Mine is QPGS30.82-135-14, and so far I've only been able to get orangefox to boot but couldn't get it to decrypt my storage or install magisk. I tried twrp first, but to no avail, touch screen still doesn't work on it, so now I'm asking on a few different threads for this phone lol. Any help would be great!
Do you know of an updated method to get it to flash correctly? I was able to boot into ofox, but couldn't get it to properly flash. Ended up stuck on a screen that said my phone was unlocked and couldn't be trusted and that it'll reboot in 5 seconds. I don't know much about ofox either, been using twrp for years lol, it looks too different. Anyhow, any help would be appreciate much!
ace120ms said:
you guys can also use OFox Recovery and swipe magisk to root
Click to expand...
Click to collapse
You have to fastboot boot it anyway I don't have this phone anymore so idk
bouyakasha said:
This method works well for QPGS30.82-135-2, but I just attempted it with QPGS30.82-135-9 and unfortunately the Magisk patched boot image will not work. I tried it 3 times, re-patching boot image each time. I suppose Motorola updated something in android to block this?
Click to expand...
Click to collapse
I have the same problem with QPGS30.82-135-9. I can't get it to boot after Magisk patched boot image.
Related
I bought a LG V35 recently. When I got the phone, I found its rooted already and looks like bootloader is unlocked since the 1st screen shows the warning unlocked messages. See attachments.
After I got into the system, I could see magisk and used root permission without any problem.
I wanted to do a system backup in the customer recovery like twrp or CWM. (I thought it should be there, since phone is rooted) But after I clicked "reboot to recovery" with TaiBackup APP, I could not get into recovery and screen shows "erasing data" and then rebooted. When system was started up again, phone was done a factory reset and magisk did not work any more...(I checked, I still can see the unlocked bootloader messages at that time)
Then I had to send my phone to the seller and got rooted again. I really do not understand how the seller rooted this phone!!
Now I am wondering if I can flash any custom recovery like twrp? I do not see LG V35 in official twrp's support device list. Dare I try the twrp for LG G7 or LG V30 or others?
If I have to try twrp for LG G7, is there anybody knows how to do a recovery backup via ADB beforehand? Anything I can do to minimize the risk?
He probably dumped the boot image with LGUP, and manually patched it with Magisk on another device
crumbling9999 said:
He probably dumped the boot image with LGUP, and manually patched it with Magisk on another device
Click to expand...
Click to collapse
Yes, I searched with google about patching magisk boot img and now I agree with you.
Now, when I trying to install some modules in magisk, I will get "installation failed". See the attachment.
I googled and tried to find the solution. It is said that I could update/re-install the magisk manager apk to solve the problem. But the seller told me DO NOT touch the magisk and even update it.
Do you know if I can update the magisk manager when rooted in the patching boot img way?
Do you know if I can install xposed in the magisk in this case?
Are there some DONTs when rooted in the patching boot img way?
Thanks for your reply.
Mate just start first with a backup via LGUP than check if you can reboot to bootloader. Then read a bit G7 thread and if you are confident in your knowledge and skills continue - it is an easy job to firstly backup your both boot mages, patch them and flash them back to your phone if you have fastboot.
vlad48 said:
Mate just start first with a backup via LGUP than check if you can reboot to bootloader. Then read a bit G7 thread and if you are confident in your knowledge and skills continue - it is an easy job to firstly backup your both boot mages, patch them and flash them back to your phone if you have fastboot.
Click to expand...
Click to collapse
Please tell me how to backup both boot images? Thx
alex.coffen said:
Yes, I searched with google about patching magisk boot img and now I agree with you.
Now, when I trying to install some modules in magisk, I will get "installation failed". See the attachment.
I googled and tried to find the solution. It is said that I could update/re-install the magisk manager apk to solve the problem. But the seller told me DO NOT touch the magisk and even update it.
Do you know if I can update the magisk manager when rooted in the patching boot img way?
Do you know if I can install xposed in the magisk in this case?
Are there some DONTs when rooted in the patching boot img way?
Thanks for your reply.
Click to expand...
Click to collapse
Is there somebody can tell me how to solve the issue that i can not install any module in magisk?
Can i update the magisk framework to 18.1 when the root method is coming from the patching boot image?
Since you have full fastboot, grab a copy of TWRP for the G7 and try booting it. I verified today that laf from the G7 boots just fine on the V35, so TWRP should work until (yes I am being optimistic here) I can get the V35 rooted and build our own TWRP.
In case you are new, the command will be:
Code:
fastboot boot twrp.img
Where twrp.img is whatever the filename of TWRP is. If the touch screen works, and the rest of the functionality is there, you can use that for now. However, you will have to have a PC and fastboot boot it every time you want to get into TWRP.
On SD845 and later devices (which the G7 and V35 have), recovery is no longer a separate partition -- it is included in boot. So, you do NOT want to flash the G7 version because while the G7 kernel may work fine for laf, and TWRP, it probably wouldn't be ideal to use as a system kernel.
Let me know if you have any questions.
I do have a question for you. Where did you get your phone from? I have a hard time believing that there are so many V35s out there with engineering bootloaders -- so I would like to get my hands on one and figure out how they unlocked the bootloader.
-- Brian
runningnak3d said:
Since you have full fastboot, grab a copy of TWRP for the G7 and try booting it. I verified today that laf from the G7 boots just fine on the V35, so TWRP should work until (yes I am being optimistic here) I can get the V35 rooted and build our own TWRP.
In case you are new, the command will be:
Code:
fastboot boot twrp.img
Where twrp.img is whatever the filename of TWRP is. If the touch screen works, and the rest of the functionality is there, you can use that for now. However, you will have to have a PC and fastboot boot it every time you want to get into TWRP.
On SD845 and later devices (which the G7 and V35 have), recovery is no longer a separate partition -- it is included in boot. So, you do NOT want to flash the G7 version because while the G7 kernel may work fine for laf, and TWRP, it probably wouldn't be ideal to use as a system kernel.
Let me know if you have any questions.
I do have a question for you. Where did you get your phone from? I have a hard time believing that there are so many V35s out there with engineering bootloaders -- so I would like to get my hands on one and figure out how they unlocked the bootloader.
-- Brian
Click to expand...
Click to collapse
Thanks for your answers.
I bought this phone from taobao which is a bigest famous online shopping site in China. I do not know how they unlocked the bootloader and tell me if something I can help with.
I unlocked LG G2/G4/oneplus 5T myself so I know the basic knowledges about how to execute ADB command and the normal root process. But I do not know the one using patched magisk boot img way.
As far as I understand, you meant that we can temporarily boot into the G7 twrp to use its functions but we cannot actually flash the twrp to the phone. Booting to G7 twrp image, is it safe? (The "safe" I mean is that, if I encounter problems, at least I still can startup the phone with rooted. Otherwise, I need to send my phone to the seller who is 2000KM away to root it again...Last time I booted into its recovery, all my data was erased...) Anyway, I will try it as you suggested, but I will put it the 2nd priority.
The 1st priority is that, I truely want to solve the problem I met about installing magisk module failed. See my attachment. I want to know if I can fix the problem by updating the magisk framework. I need the "safe" way as I just said.
So if I click "yes" in the 33.jpg I attached, do you know which would happen?
A. brick the phone
B. restart and get a factory reset, then I cannot use root any more
C. nothing changed, still install module failed but root can work
D. Solve the problem and can install module successfully
If you press "Yes" it will just download Magisk setup which will fail doing anything it will reboot to the stock recovery which will perform security check and wipeout magisk from boot image.
To solve your problem and install the module properly you need to patch externally your boot image and and flash it back in fastboot mode overwriting both a and b slots.
So:
1. Dump boot via LGUP download mode.
2. Patch it via Magisk Manager.
3. Flash it back under fastboot mode.
4. Install your module and enjoy...
P.S.: If you are not confident on how to perform any of the listed steps above please do not start it at all because definitely you will need to travel 200 km again for restoring root...
vlad48 said:
If you press "Yes" it will just download Magisk setup which will fail doing anything it will reboot to the stock recovery which will perform security check and wipeout magisk from boot image.
To solve your problem and install the module properly you need to patch externally your boot image and and flash it back in fastboot mode overwriting both a and b slots.
So:
1. Dump boot via LGUP download mode.
2. Patch it via Magisk Manager.
3. Flash it back under fastboot mode.
4. Install your module and enjoy...
P.S.: If you are not confident on how to perform any of the listed steps above please do not start it at all because definitely you will need to travel 200 km again for restoring root...
Click to expand...
Click to collapse
Thanks for explaining. That is what I worry about. Some questions for you:
1. I have used LGUP to dump boot_a and boot_b. (Very slow, took 1 hour. I renamed them to boot_a_org.img and boot_b_org.img, they are no difference with cksum). So this is currently boot images patched by seller? So, no matter what problems I encounter, I can flash boot_a_org.img(boot_b_org.img) back to boot_a and boot_b to recover my phone anytime and still get rooted? If so, I can feel free to do anything no worrying about the 2000KM delivery...
2. You mentioned "Patch it via Magisk Manager". I can directly patch boot_a_org.img to do it? I think boot_a_org.img is already patched by seller. (I do not have the original unpatched and unlocked bootloader img for V35...)
3. "Patch it via Magisk Manager". can only be done in my V35 phone, or it is OK to do it in other phones?
4. Can I try to boot into G7 twrp then I can flash the newest magisk via twrp? In this way I can fix my problem?
Thank you very much in advance.
1. Download LGUP from HERE
(make sure you put it in the right place afterwards: C:\Program Files (x86)\LG Electronics\LGUP)
2. Shut down your phone and then press VOL+ button and connect it via USB cable to your computer (The phone will boot in download mode).
3. Start LGUP.exe and select DUMP mode. DUMP only those partitions (place checkbox):
abl_a
abl_b
boot_a
boot_b
xbl_a
xbl_b
This will finish our backup preparation, so report back once done.
(Also just come to a better idea - compress and upload somewhere your boot_a file I'll try to patch it with latest Magisk and upload it back to you)
vlad48 said:
If you press "Yes" it will just download Magisk setup which will fail doing anything it will reboot to the stock recovery which will perform security check and wipeout magisk from boot image.
To solve your problem and install the module properly you need to patch externally your boot image and and flash it back in fastboot mode overwriting both a and b slots.
So:
1. Dump boot via LGUP download mode.
2. Patch it via Magisk Manager.
3. Flash it back under fastboot mode.
4. Install your module and enjoy...
P.S.: If you are not confident on how to perform any of the listed steps above please do not start it at all because definitely you will need to travel 200 km again for restoring root...
Click to expand...
Click to collapse
Laf has new security that prevents reading for now. LG UP 1.14 and 1.15 can't read .. and I can't find a copy of 1.16.
-- Brian
@runningnak3d maybe you are mixing V40 with V35. Using this DUMP only version of LGUP bootloader unlocked phones are able to dump all (even non kdz partitions) so he will be able to perform this operation.
vlad48 said:
@runningnak3d maybe you are mixing V40 with V35. Using this DUMP only version of LGUP bootloader unlocked phones are able to dump all (even non kdz partitions) so he will be able to perform this operation.
Click to expand...
Click to collapse
This only works for v35 phones with unlocked bootloader?
Yes, I have already dumped those part:
abl_a
abl_b
boot_a ============> I rename this one to boot.img
boot_b
xbl_a
xbl_b
Could you teach me what is each one used for?
So boot.img is currently boot image patched by seller? So, no matter what problems I encounter, I can flash boot.img back to boot_a and boot_b to recover my phone anytime and still get rooted? If so, I can feel free to do anything no worrying about the 2000KM delivery...
You mentioned "Patch it via Magisk Manager". I can directly patch boot.img to do it? I think boot.img is already patched by seller. (I do not have the original unpatched and unlocked bootloader img for V35...)
alex.coffen said:
Yes, I have already dumped those part:
abl_a
abl_b
boot_a ============> I rename this one to boot.img
boot_b
xbl_a
xbl_b
Could you teach me what is each one used for?
So boot.img is currently boot image patched by seller? So, no matter what problems I encounter, I can flash boot.img back to boot_a and boot_b to recover my phone anytime and still get rooted? If so, I can feel free to do anything no worrying about the 2000KM delivery...
You mentioned "Patch it via Magisk Manager". I can directly patch boot.img to do it? I think boot.img is already patched by seller. (I do not have the original unpatched and unlocked bootloader img for V35...)
Click to expand...
Click to collapse
The files I dumped from LGUP are bin file or img file?
I try to patch the boot.img file but everytime I get error. See attachment.
@alex.coffen Yes if you backup your boot image and do not boot into RECOVERY everything will be safe.
It appears your DUMP was not done properly. Please if possible open your boot.img with HEX editor and take a look at it - if there are only 0-es there than it appears something is wrong with your dump.
vlad48 said:
@alex.coffen Yes if you backup your boot image and do not boot into RECOVERY everything will be safe.
It appears your DUMP was not done properly. Please if possible open your boot.img with HEX editor and take a look at it - if there are only 0-es there than it appears something is wrong with your dump.
Click to expand...
Click to collapse
Yes, all 0-es. What should I do? I have already re-installed the USB dirver 4.2.0. See attachment.
Since I failed to use LGUP dump boot img, I think about another way.
I installed termintor on my phone. Under directory /dev/block/bootdevice/by-name, I execute "ls -l" then I can find all partitions, for one example:
boot_a -> /dev/block/sde11
In this case, do you know if I can use "dd if=/dev/block/sde11 of=/storage/emulated/0/Download/boot_a.img" to get the boot img?
@runningnak3d， @vlad48
Since I failed to use LGUP to dump boot img, I think about another way.
I installed termintor on my phone. Under directory /dev/block/bootdevice/by-name, I execute "ls -l" then I can find all partitions, for one example:
boot_a -> /dev/block/sde11
In this case, do you know if I can use "dd if=/dev/block/sde11 of=/storage/emulated/0/Download/boot_a.img" to get the boot img?
@runningnak3d， @vlad48
Disclaimer: This WILL void your warranty. I am not liable for breaking/bricking your phone, you losing your data, or any nuclear war/other catastrophe. This process WILL totally wipe all data on your phone. Make sure you have a backup! You will also forever see "bad key" displayed in the top left of your screen for a few seconds after a reboot after unlocking the bootloader. There is currently no way around this that I'm aware of (let me know if you have a way)
This guide was assembled from mingkee's G7 guide here: https://forum.xda-developers.com/moto-g7/how-to/root-g7-magisk-t3907084
You will need:
1. Your Moto G7 Power (Any hardware version, any carrier, but running Android 9 Pie)
2. A stock boot.img for your hardware version, here are the two that I have. You can just extract the boot.img from a stock ROM for a hardware version not listed, although I'm not sure it actually matters which one you use. Experiment at your own risk.
XT1955-5 US: https://mega.nz/#!L0sHzSKY!323GrDQ8BTsPmKvrSoU7DV-2kJuVris0cWN8Xt3u_6o
XT1955-2 LATAM: https://mega.nz/#!uk912I4B!12_EgPML2l5sIXDeDGVqiVDB2RwA6iF6-H-mivNecOo
(Full stock ROM's for both versions will be linked in the next post. )
3. A USB cable to connect your G7 to a computer
4. Motorola USB drivers: https://support.motorola.com/uk/en/...moto-g-family/moto-g7-power/documents/MS98028
4. Your bootloader unlock code from Motorola, more on that below
5. Android SDK
Step 1: Unlocking the bootloader
First we'll need to unlock the bootloader, to do this, you'll need your unlock code from Motorola:
https://support.motorola.com/us/en/bootloader
Note that this will require you to register your device with Motorola, and this WILL void your warranty.
Then, download and install the Motorola USB drivers (link above), you may need to reboot your computer after installation.
Next you'll need to download and extract/install the Android SDK
https://developer.android.com/studio/index.html#downloads
Note that you'll only need the "command line tools" for this guide, unless you really want the whole SDK (huge).
Extract the command line tools to anywhere really, C:\Android is fine for Windows. If you downloaded/installed the whole sdk, the tools you need will be in C:\Users\[your username]\AppData\Local\Android\Sdk\platform-tools
Once you have that, open up a powershell window in your tools folder by holding Shift and right-clicking in the folder.
Now, reboot your G7 to fastboot mode by powering off, then holding power+volume down until you're in the bootloader. Now, connect your G7 to your computer with your USB cable.
In powershell, verify your device is recognized by typing "./fastboot devices". Your G7 should show up by its serial number.
Now, type "./fastboot oem unlock [your motorola unlock code]". THIS WILL WIPE ALL DATA ON YOUR PHONE. After that, use the volume up and down buttons and then the power key to restart the bootloader. You should now see "flashing_unlocked" at the bottom of the bootloader screen. Now use the volume/power buttons to select "start" to boot the phone. You will see "bad key" displayed in the top left corner of the screen. This is normal. The phone should boot and bring you to the Android set up wizard. Go ahead and set up the phone as you normally would.
Note that at this time, if you go to "Update" in system settings, it may warn you that "system integrity is compromised" and that you will no longer receive OTA updates. This is also normal, we'll fix that in a bit.
Step 2: Rooting
Now that we have an unlocked bootloader, we can flash things to the phone through fastboot (at the time of this writing, TWRP or other custom recoveries are not available for the G7 Power. Once it is, you can use that to flash the Magisk .zip file instead of using powershell).
Copy the correct *_boot.img for your hardware version to a folder on your phone. I used the downloads folder. (not too sure if the version makes a difference; I was able to flash the entire US XT1955-5 firmware/rom to my Latin America XT1955-2 without a problem, but experiment at your own risk)
Download and install the Magisk Manager APK through Chrome or browser of your choice on your G7
https://github.com/topjohnwu/Magisk/releases
It will ask you if you want to allow [your browser] to install things from unknown sources. Say yes.
Then, open Magisk Manager and tap "Install". Then tap "patch boot image file". Select the *_boot.img you copied earlier and let it run. It will tell you when its done.
Once it completes, copy the patched *_boot.img back to your computer and place it in the same folder as your Android SDK tools (where fastboot.exe and adb.exe live)
Now power off the phone then boot to fastboot, again by holding power + volume down until the bootloader appears.
Now in powershell, type "./fastboot flash boot [the name of your patched boot.img].img" and hit enter. Alternatively, type "./fastboot flash boot" then hit space, then drag your patched *_boot.img into powershell and hit enter.
(Note, if you get an error saying "Invalid partition name boot__a" like I did, add a "_a" to "boot" ie "./fastboot flash boot_a [the name of your patched boot.img]" instead. )
Powershell should tell you "Image signed with key bad key". This is normal.
Now use the volume up/down buttons and power button to start the phone.
Once booted, load up Magisk Manager again. You should see all green checkmarks. Congrats, your G7 is now rooted! One last thing:
Tap where Magisk says "tap to start SafetyNet check". This tests to see if its able to fool Google's checks and let you install OTA updates or use Android Pay. If you did everything properly, this should all check out fine. Confirm by going into Updates in System Settings and verifying that you are up-to-date and it doesnt say anything about "device integrity compromised".
Thanks to everyone who's work I shamelessly paraphrased. I wanted to make a concise guide specifically for the G7 power as I didn't find much online regarding it. (And the stock US rom was ridiculously hard to find and acquire). I'll link stock US and Latin America G7 Power firmwares/roms in the post below in case anyone wants to go back to stock, once the upload finishes. Note: there is no known way at the time of this writing that you can ever get rid of "bad key" being displayed at boot once you unlock the bootloader (again, if anyone knows how, let me know! Thanks!)
gedster314 linked me to a site in another thread where stock ROMS for a lot of devices can be found, including the XT1955 (codename: Ocean).
https://mirrors.lolinet.com/firmware/moto/ocean/official/
"RETUS" on that page would signify "Retail, US"
until some good custom roms will pop out i don't have needs to unlick/root...
mrmcphisto77 said:
until some good custom roms will pop out i don't have needs to unlick/root...
Click to expand...
Click to collapse
Baby steps my friend.
Their are still reasons to Root a phone besides ROMs. Titanium backup, Root explorer, and having super user
access. I used to Root my Pixel 2 to enable tethering when the carrier blocked it. The fact that we don't have
the option of super user access on a device we own is crazy. Jailbreaking the iPhone opens up so many
customization's with tweaks and apps that I went to the dark side. I also have the G7 Power so I'm not a
total traitor.
mrmcphisto77 said:
until some good custom roms will pop out i don't have needs to unlick/root...
Click to expand...
Click to collapse
Got everything to work! Flashed Tethering Enabler too. Thank you!
nucher said:
Their are still reasons to Root a phone besides ROMs. Titanium backup, Root explorer, and having super user
access. I used to Root my Pixel 2 to enable tethering when the carrier blocked it. The fact that we don't have
the option of super user access on a device we own is crazy. Jailbreaking the iPhone opens up so many
customization's with tweaks and apps that I went to the dark side. I also have the G7 Power so I'm not a
total traitor.
Click to expand...
Click to collapse
There's one more reason to root: CF Lumen
I want all devices have same exactly same white tone.
Anyone with a regional phone that has NFC and 5ghz disabled try flashing to a region that has it enabled to see if it works?? I read the NFC and 5ghz options are just software locked
turboyo said:
Anyone with a regional phone that has NFC and 5ghz disabled try flashing to a region that has it enabled to see if it works?? I read the NFC and 5ghz options are just software locked
Click to expand...
Click to collapse
I've tried that. Flashing the XT1955-2 with the XT1955-5 firmware. It flashes and boots up without a problem but no dice for the 5Ghz. I have gotten ALL LTE bands unlocked however, about to write up a how-to. If I can get 5ghz wifi working then the XT1955-2 will be the cats meow with its 4gb ram and dirt cheap price.
diversenerd said:
I've tried that. Flashing the XT1955-2 with the XT1955-5 firmware. It flashes and boots up without a problem but no dice for the 5Ghz. I have gotten ALL LTE bands unlocked however, about to write up a how-to. If I can get 5ghz wifi working then the XT1955-2 will be the cats meow with its 4gb ram and dirt cheap price.
Click to expand...
Click to collapse
Perfect. How about NFC? Does the XT1955-2 come with NFC already enabled? Or does the -5 enable it?
turboyo said:
Perfect. How about NFC? Does the XT1955-2 come with NFC already enabled? Or does the -5 enable it?
Click to expand...
Click to collapse
I was wrong in my first thread, my -2 does NOT have NFC. Heres the newly minted LTE Band unlocking guide: https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-enable-lte-t3925246
After rooting i got some issues with appflix and a system app called motorolas notification
(I am peruvian i just tralated the name)
Anyone having the same issue?
Darkstarsx said:
After rooting i got some issues with appflix and a system app called motorolas notification
(I am peruvian i just tralated the name)
Anyone having the same issue?
Click to expand...
Click to collapse
What kind of issues? I haven't noticed any ill effects of rooting with this method.
my touchscreen is not working at all after the rooting step. how do i fix this?
jay8898 said:
my touchscreen is not working at all after the rooting step. how do i fix this?
Click to expand...
Click to collapse
Try rolling back to stock with my other guide. Then try again.
Thanks for the guide, phone is now rooted. Is it safe to do a factory reset to be able to start the phone set up again to automatically download apps, settings, etc from Google? If not, is there another, better way to do that?
diversenerd said:
Try rolling back to stock with my other guide. Then try again.
Click to expand...
Click to collapse
PLZ HELP!!!
before if found this thread, I unlocked the bootloader then i saw a magisk boot.img in another website that works with xt1955-5 & 1955-6 and hwen i flash it it said "Imaged signed with bad key bad" and when i reboot it bootloops between the "your device is now unlocked" and the motorola logo
This is my first time working with fastboot
i worked with EDL but not Fastboot
But after some research I FOUND out that i could have used "fastboot boot boot.img" before actually flashing it but I WAS TOO LATE.
ANY HELP
APPRECIATE IT SO MUCH
And i just bought this phone yesterday
jay8898 said:
my touchscreen is not working at all after the rooting step. how do i fix this?
Click to expand...
Click to collapse
Could you fix it? It also happened to me, xt1955-2 claro Colombia
---------- Post added at 09:47 AM ---------- Previous post was at 09:42 AM ----------
Chickenaa said:
PLZ HELP!!!
before if found this thread, I unlocked the bootloader then i saw a magisk boot.img in another website that works with xt1955-5 & 1955-6 and hwen i flash it it said "Imaged signed with bad key bad" and when i reboot it bootloops between the "your device is now unlocked" and the motorola logo
This is my first time working with fastboot
i worked with EDL but not Fastboot
But after some research I FOUND out that i could have used "fastboot boot boot.img" before actually flashing it but I WAS TOO LATE.
ANY HELP
APPRECIATE IT SO MUCH
And i just bought this phone yesterday
Click to expand...
Click to collapse
You could try to flash a stock firmware with diversenerd's guide
https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138
And try to root again,
Also, I tried to "fastboot boot boot.img" and it does not work, dont blame yourself for that
Poto222 said:
Could you fix it? It also happened to me, xt1955-2 claro Colombia
---------- Post added at 09:47 AM ---------- Previous post was at 09:42 AM ----------
You could try to flash a stock firmware with diversenerd's guide
https://forum.xda-developers.com/g7-power/how-to/guide-moto-g7-power-supra-flash-to-t3927138
And try to root again,
Also, I tried to "fastboot boot boot.img" and it does not work, dont blame yourself for that
Click to expand...
Click to collapse
It Worked and I root too
I was wondering if there's a twrp for this device and I want to install Dolby Digital Plus but Everytime I install it through a magisk zip module and then open it, it stop
Chickenaa said:
It Worked and I root too
I was wondering if there's a twrp for this device and I want to install Dolby Digital Plus but Everytime I install it through a magisk zip module and then open it, it stop
Click to expand...
Click to collapse
Someone on the Telegram group has a working TWRP build, he said he'll be posting it soon.
So after you unlocked the boot loader ( see my previous post)
you can start rooting with magisk manager / patching the boot.img from the original firmware
I used this thread in order to get root ; i modified the contents so it would fit the moto phone a bit better:, but thnx goes to Ibolito over at the pixel 3 forums
1 ) Download the latest Android factory image for your device ("see this guide on where to find it.
2 ) Extract the "boot.img" file from the downloaded image and copy it to your phone.
Warning! Make absolutely sure the firmware is exactly the same as the installed one. If not, you might loose touch.
Be aware that LMSA will download the latest firmware, even if it is not yet installed. That might break your touchscreen
Click to expand...
Click to collapse
3 ) Download latest Magisk Manager application on your phone and install it :
Link
4 )Press on the Install Magisk button (the one on the top, not the Magisk Manager), then Install > Select and Patch a File and now select the Boot.img file you extracted earlier. When the process is done, just put the patched boot.img file on your computer in the same folder as your ADB and FASTBOOT tools, the file's name is magisk_patched.img
edit: i received a comment that the name might be something like Magisk_patched_somerandomletters_.img since the latest magisk update
5 ) Enable adb debugging on your phone and connect it to your computer via USB.
Open a command prompt on your computer and migrate to the folder where the ADB and Fastboot tools are located.
(for exemple, for me it's : cd C:\adb).
7 ) Reboot your phone to fastboot by typing adb reboot bootloader
8 ) Flash the Boot.img you just patched with magisk by typing fastboot flash boot magisk_patched.img
extra: You could test a single boot with that image by typing "fastboot boot magisk_patched.img"
if it boots fine you should have root for this single boot / magisk would show as installed.
9 ) When it's done, reboot by typing fastboot reboot
10 ) Open your Magisk Manager app and check if everything is good, and it should be
extra info:
I did worry a bit because the original boot.img is 64 megs , while the patched version is only 12
but i went with it, and it was fine.
good luck to you all
Edit: rewritten entire post so it would look more like a guide, and extra warning because a lot of people seem to loose touch if they don't have the exact same firmware downloaded as on their phone.
Thanks for posting this. I unlocked my bootloader and would like to root like you did.
Do you install magisk first on your phone, then get the magisk_patched file from your phone? Or is the magisk_patched file obtained somewhere else?
testtubebaby said:
Thanks for posting this. I unlocked my bootloader and would like to root like you did.
Do you install magisk first on your phone, then get the magisk_patched file from your phone? Or is the magisk_patched file obtained somewhere else?
Click to expand...
Click to collapse
You need to install the magisk manager
In magisk manager you can click on "install (magisk)"--> "by patching a file"
then you select the file to be patched ( extracted from the original rom )
after that you can copy the patched file from your phone back to the pc and install it via fastboot.
After that magisk is installed
i hope you succeed
pjottrr said:
You need to install the magisk manager
In magisk manager you can click on "install (magisk)"--> "by patching a file"
then you select the file to be patched ( extracted from the original rom )
after that you can copy the patched file from your phone back to the pc and install it via fastboot.
After that magisk is installed
i hope you succeed
Click to expand...
Click to collapse
The firmware I see is the EU firmware. I don't see the GB firmware in the link you posted (it's RETGB). Any idea where I can find the correct firmware?
Sorry, no idea, i found the provided link via google,
testtubebaby said:
The firmware I see is the EU firmware. I don't see the GB firmware in the link you posted (it's RETGB). Any idea where I can find the correct firmware?
Click to expand...
Click to collapse
https://mirrors.lolinet.com/firmware/moto/sofiar/official/
zuggi_m said:
https://mirrors.lolinet.com/firmware/moto/sofiar/official/
Click to expand...
Click to collapse
@zuggi_m , how does posting the same url help?
i don't see a retgb here ....
Maybe someone with more dev experience can tell if you need the exact same firmware or if the version numbers are the same it is ok to use that file ?
No fastbootd?
One Hyper needs fastbootd in order to flash boot and root
mingkee said:
No fastbootd?
One Hyper needs fastbootd in order to flash boot and root
Click to expand...
Click to collapse
i don't really understand the question i guess,
a magisk patched boot is flashed via fastboot. after that you have magisk installed and root access.
pjottrr said:
i don't really understand the question i guess,
a magisk patched boot is flashed via fastboot. after that you have magisk installed and root access.
Click to expand...
Click to collapse
Yours should be G8 Power (9)
Native Android 10 uses fastbootd to flash boot, dtbo, and recovery
mingkee said:
Yours should be G8 Power (9)
Native Android 10 uses fastbootd to flash boot, dtbo, and recovery
Click to expand...
Click to collapse
maybe i'm missing your point here, my description is just so people who have to figure it out can just use my steps to get root, it is indeed based on fastboot flashing . so i'm not sure what you are trying to say, or am i misinterpreting something?
https://forum.xda-developers.com/motorola-one-hyper/development/rom-omnirom-t4044405
I did root on One Hyper (shipped with Android 10) using fastbootd method
Used old method soft brick my One Hyper
That's why I'd like to know
pjottrr said:
so after you unlocked the boot loader ( see my previous post)
you can start rooting with magisk manager / patching the boot.img from the original firmware
I used this thread in order to get root
you need to download the firmware for our device,
That can be found here;
https://mirrors.lolinet.com/firmware/moto/sofiar/official/RETEU/
after that, extract, patch, fastboot install patched version, done.
I did have some issues with the current magisk manager ( from highonandroid, i did find another source, installed version 7.5.1 of the magisk manager from this source
and that one was able to patch the boot.img
I did worry a bit because the original boot.img is 64 megs , while the patched version is only 12
but i went with it, and it was fine.
good luck to you all
Click to expand...
Click to collapse
There's a head up
US version: Sofia
The rest: Sofiar
I will buy US G Power in May and let's the fun begin
Check out One Hyper general to install Dolby Atmos and it can be toggle on/off.
Has anyone tried copying something to the root of the phone or making build.prop edits? I have the Stylus and have achieved root using the same method, however there is something not quite right with the permissions. I cannot make changes to any root files.
CCivale said:
Has anyone tried copying something to the root of the phone or making build.prop edits? I have the Stylus and have achieved root using the same method, however there is something not quite right with the permissions. I cannot make changes to any root files.
Click to expand...
Click to collapse
So you should know G Stylus ROM is Sofiap.
Be aware the way Android 10 flashing is different.
Download and install the latest ADB in order to access fastbootd (fastboot reboot fastboot) and flash boot, recovery, dtbo, vbmeta, and super
Hmmmm, I will have to read more about fastbootd in your other thread.
I did use the boot.img for the sofiap.
Hello,
I followed all the instructions in the first post and was able unlock the bootloader, install magisk, and use it to make the magisk_patched.img file from a boot.img file.
The only variation, was that I got my boot.img file from mirrors.lolinet.com/firmware/moto/sofia/official/RETUS/XT2041-4_SOFIA_RETUS_10_QPM30.80-13-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip since my phone is a US retail model.
After flashing, the phone boots up properly but the touchscreen does not work.
The side buttons do work and I was able to reboot into recovery. In recovery, the build on the phone is indicated as QPM30.80-51. The build in the above indicated file is QPM30.80-13-2. Could this be the source of the problem?
I have tried flashing the original boot.img (from the file above) back and the touchscreen still does not work. I have also tried “wipe data/factory reset” in recovery.
hazd said:
Hello,
I followed all the instructions in the first post and was able unlock the bootloader, install magisk, and use it to make the magisk_patched.img file from a boot.img file.
The only variation, was that I got my boot.img file from mirrors.lolinet.com/firmware/moto/sofia/official/RETUS/XT2041-4_SOFIA_RETUS_10_QPM30.80-13-2_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip since my phone is a US retail model.
After flashing, the phone boots up properly but the touchscreen does not work.
The side buttons do work and I was able to reboot into recovery. In recovery, the build on the phone is indicated as QPM30.80-51. The build in the above indicated file is QPM30.80-13-2. Could this be the source of the problem?
I have tried flashing the original boot.img (from the file above) back and the touchscreen still does not work. I have also tried “wipe data/factory reset” in recovery.
Click to expand...
Click to collapse
maybe try with the "correct" firmware? ( not sure if the minor diference changes anything, but you could try....
i found it here:
https://rsdsecure-cloud.motorola.co...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
pjottrr said:
maybe try with the "correct" firmware? ( not sure if the minor diference changes anything, but you could try....
i found it here:
rsdsecure-cloud.motorola.com/download/SOFIA_RETAIL_QPM30.80-51_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
Thanks for finding this link.
Unfortunately i am not able to download this for some reason. I get an access denied error message.
edit:
I was able to find the most recent firmware here:
github.com/AndroidDumps/motorola_sofia_dump/tree/sofia_retail-user-10-QPM30.80-51-bd0b4-release-keys
I downloaded just the boot.img file and flashed it. That fixed the touchscreen issue. I then used magisk to batch the boot.img and I now have root.
Just to be clear, this worked on a US retail moto g power purchased unlocked from best buy. The phone model number is XT2041-4.
Hope this helps.
hazd said:
Thanks for finding this link.
Unfortunately i am not able to download this for some reason. I get an access denied error message.
edit:
I was able to find the most recent firmware here:
github.com/AndroidDumps/motorola_sofia_dump/tree/sofia_retail-user-10-QPM30.80-51-bd0b4-release-keys
I downloaded just the boot.img file and flashed it. That fixed the touchscreen issue. I then used magisk to batch the boot.img and I now have root.
Just to be clear, this worked on a US retail moto g power purchased unlocked from best buy. The phone model number is XT2041-4.
Hope this helps.
Click to expand...
Click to collapse
I downloaded the kernel and waiting for the unit.
I can flash full ROM with fastboot and fastbootd, but just flashing kernel would be much faster.
Moreover, check One Hyper general to get Dolby Atmos because you can turn on and off anytime you want.
Here's a quick guide for rooting your Fairphone 4.
DISCLAIMER
I'm not the author of this method, merely sharing the informations that can be found on fairphone community forums.
All credit goes to hirnsushi from fairphone community forum.
I will not be held responsible for any damage caused by this operation, flashing your device always implies a risk of manufacturing your very own plastic brick.
PREREQUISITES
- Unlocked bootloader
- Computer with adb & fastboot
- Magisk app installed on your device
- FP4's official stock boot.img
HOW TO ROOT
1. Copy the boot.img file on your device's internal memory
2. Patch the boot.img file using Magisk -> Installation -> Patch a file
3. Transfer the patched boot.img back to your computer
4. Reboot to fastboot: Power + vol up from off device OR adb reboot bootloader
5. Boot from the patched img by running: fastboot boot patched_boot.img where patched_boot.img is actually replaced with the path and name of your patched file
DO NOT FLASH THE PATCHED IMG. BOOT ONLY.
6. Your device will take much much more time to boot than usual, be patient.
7. Once booted, open Magisk, run a direct Install and reboot.
You are now rooted.
This will break your ability to use Google Pay. Though a workaround is described below.
[OPTIONAL]- PASS SAFETYNET AND GPAY CERTIFICATION
1. Download and enable the following Magisk mod:
- Riru module
- Riru’s universal SafetyNet’s fix 2.1.2
- SQLLite for ARM aarch64 devices
- GPay SQLLite Fix 2.5
2. Enable Magisk hide and hide Magisk from the following packages:
- Google Play Store
- Google Pay
- Google Play Services
3. Now the part that is very important to follow otherwise it will not work :
- Put your phone in Airplane mode
- Clear all data from:
Google Play
Google Pay
Google Play Service: remember, clear ALL data, not just cache, even for this one
- Reboot
- Toggle Airplane mode off
You should now have a rooted device that can be used to pay for groceries. How cool is that.
If Pay app states device is not certified, there is high chances you did not follow exactly the described steps.
I really like a rooted phone as always. I will wait till there is a way to reinstall the standard ROM. Then it will be safe for me to try.
I'm on the latest update and not able to unlock the bootloader. I enabled OEM unlocking in developer options and rebooted to bootloader. On the first screen it says "Device status: Locked" and doesn't react on any fastboot command. When I enter recovery and start fastboot, each command will fail (command not present in this implementation). Any hints?
Finally managed to unlock the bootloader. The trick was to use an USB2.0 port on my PC.
I live in US so don't have one in my hands yet. Has anyone done a .QCN dump of the phone yet? Do you program the phone with Firehose EDL? Are there qualcomm drivers? I have so many questions.
I tried it with the latest boot.img avaliable here ('cause I have the A.094 ROM version on my phone)
Fairphone 4 Kernel Source Code — FAIRPHONE open source documentation
code.fairphone.com
https://storage.googleapis.com/fairphone-source/FP4/A.094-boot.img
And that works perfectly, that's my daily driving phone, and no problems
Generally speaking I can only but encourage you to register and browse the fairphone forum as there are much much more resources, guides and activity around the fairphone 4 than on xda.
I'm using latest magisk 24.1 and todays OTA fails. I tried with Zygisk on and off. In the magisk app under install there is a install to new slot thing but I feel like that's supposed to be used if it don't fail. will I brick my phone if i click it?
edit:
found this on fp forum
Fixing OTA after rooting
Because my FP is rooted, I couldn’t install the update right away. Message: Couldn't update, installation problem The problem is that the boot partition gets modified when you root your phone and this prevents the OTA package from installing. It’s described well on Quora. This is how I was...
forum.fairphone.com
citroniais said:
I tried it with the latest boot.img avaliable here ('cause I have the A.094 ROM version on my phone)
Fairphone 4 Kernel Source Code — FAIRPHONE open source documentation
code.fairphone.com
https://storage.googleapis.com/fairphone-source/FP4/A.094-boot.img
And that works perfectly, that's my daily driving phone, and no problems
Click to expand...
Click to collapse
My Build-Number say I am on:
FP4.FP3R.A.099.20220112
So it seems my Bootloader version should be A.099 but there is no file like this:
https://storage.googleapis.com/fairphone-source/FP4/A.099-boot.img
Is it okay to take a older boot img or another?
Latest seems to be
https://storage.googleapis.com/fairphone-source/FP4/A.094-boot.img
and before that:
https://storage.googleapis.com/fairphone-source/FP4/A.091-boot.img
yes I used 094 to root 099 yesterday, just don't flash the 094 or the modded 094.
I'm using latest magisk and safetynet-fix-v2.2.1, GPay.SQLite.Fix.v2.5, SQLite for ARM aarch64 devices.
Thomas.swe said:
yes I used 094 to root 099 yesterday, just don't flash the 094 or the modded 094.
Click to expand...
Click to collapse
okay, so you are on a magisk-boot-v-A.094? I thought Magisk, run a direct Install then is only able to patch your current running patched-A.094 boot.
Am I wrong?
I have rooted 099 with latest magisk 24.1 you only boot with the 094 versions to root the 099.
Thomas.swe said:
I have rooted 099 with latest magisk 24.1 you only boot with the 094 versions to root the 099.
Click to expand...
Click to collapse
Yes that it true, you are have root now.
But I think you are on the bootloader version A.094.
the 099 came from OTA so why whould bootloader be 094?
Thomas.swe said:
the 099 came from OTA so why whould bootloader be 094?
Click to expand...
Click to collapse
I am just thinking that you are on 094. Perhaps I am wrong.
But in step 5 you boot the patched 094 img and with this 094 boot image you run the direct magisk install on step 7. If I a not wrong magisk used the current running boot-image. So magisk patched your 094.
Perhaps I am wrong, I am not sure.
EDIT:
You are right @Thomas.swe Sorry for confusing.
See here: https://forum.fairphone.com/t/fp4-root-access-is-possible-maybe-a-bit-risky/76839/144
EDIT2:
@Eznaa does "our device will take much much more time to boot than usual, be patient." mean more than 20 minutes?
EDIT3:
No I used the wrong bootloader. Iode OS has its own bootloader-image upsi
I had root working using this method on A.116-boot.img. I then uninstalled Magisk, did an OTA (to A.128), did "Install Magisk to inactive Slot" (as I successfully did in older OTA updates), but it bootloops. If I `fastboot flash boot A.128-boot.img` it boots normally, but as expected, without root.
I tried an `adb wait-for-device shell magisk --remove-modules` to make sure no Magisk modules are causing the bootloop. I am on Magisk 25.1, btw.
Do you have any idea what could cause the Magisk-patched image to bootloop?
Hi,
Did you try to patch A.128 and boot on it ?
fastboot boot [image]
Please note : the best way to find an answer about any issue related to Fairphone is in the "Fairphone Community Forum" : forum.fairphone.com - The Fairphone users are not using that much XDA
I am thinking of buying Fairphone 4 and need magisk. Can anyone answer a question about the installation instructions above? Magisk website says to flash the magisk patched boot image but here the instruction is to first boot from the magisk patched image, not flash it, and then once booted run a direct install from the magisk app. What is the reason for this extra step?
Just a heads up. Root/Unlock voids FairPhone warranty unfortunately. Only reason I haven't bought this phone.
Hello Friends,
Android 12L Section
Android 12L has finally been released for Duo 1 and the update makes this device what it should have been from the beginning (again...). But root is always nice.
Pre-requisites
Unlocked bootloader
adb/fastboot set up properly
understanding what adb/fastboot and basic commands using these tools
How to open a CMD/Powershell in a given location
Windows 10/11 (you can make this work for MacOS/Linux but that isn't what this guide is based on)
I do not know if this will for at&t version or not. I do not have the at&t model so I cannot verify.
Download this patched boot.img (link)
This is simply the Android 12L stock boot img patched with magisk 25.2, I just did the hard work for you because it is a pain in the butt to get payload unloader to work.
If you want to go the payload dumper yourself and make your own boot.img, see below.
Install Magisk Manager 25.2 which is the current stable/beta build (link)
either via adb or manually
Open Magisk Manager Once after installation and before moving to the next step
Boot into bootloader
either from cmd adb while the device is booted via adb command
Code:
adb reboot-bootloader
or from issuing a reboot from the power menu and holding volume down while rebooting
or from power off, hold the power button and volume down for 3 seconds
Boot the patched boot.img you downloaded by opening a CMD in the location of the downloaded patched boot and issuing this command
Code:
fastboot boot patched.156.boot.img
The device will boot into Android system
Open Magisk Manager > Click "Install" > "Direct Install"
Maigsk will install and reboot
Your device is rooted
Android 11 Section
Android 11 has finally been released for Duo 1 and the update makes this device what it should have been from the beginning. But root is always nice.
Luckily Android 11 has made rooting a bit easier as well.
Pre-requisites
Unlocked bootloader
adb/fastboot set up properly
understanding what adb/fastboot and basic commands using these tools
How to open a CMD/Powershell in a given location
Windows 10/11 (you can make this work for MacOS/Linux but that isn't what this guide is based on)
I do not know if this will for at&t version or not. I do not have the at&t model so I cannot verify.
Download this patched boot.img (link)
This is simply the Android 11 stock boot img patched with magisk 23, I just did the hard work for you because it is a pain in the butt to get payload unloader to work.
If you want to go the payload dumper yourself and make your own boot.img, see below.
Install Magisk Manager 23 which is the current stable/beta build (link)
either via adb or manually
Open Magisk Manager Once after installation and before moving to the next step
Boot into bootloader
either from cmd adb while the device is booted via adb command
Code:
adb reboot-bootloader
or from issuing a reboot from the power menu and holding volume down while rebooting
or from power off, hold the power button and volume down for 3 seconds
Boot the patched boot.img you downloaded by opening a CMD in the location of the downloaded patched boot and issuing this command
Code:
fastboot boot patched.156.boot.img
The device will boot into Android system
Open Magisk Manager > Click "Install" > "Direct Install"
Maigsk will install and reboot
Your device is rooted
Extraction of payload.bin from OTA.
If you want to extract the boot.img yourself and patch it yourself, download the payload.bin extractor from here. Acquire the OTA either via recovery images or capturing the OTA URL during an update (link).
Use the payload dumper to get the boot.img, install Magisk on your device and transfer the boot.img to it to patch that stock boot.img using Magisk. After that, you will have your own patched boot.img.
Proceed with step number 4.
A huge thank you to @NTchrist and @Perseu5 for pathfinding this all and their amazing guides, give those guys some thanks and kudos please!
Unlocking Bootloader/ Magisk Attempt
MAGISK FULL GUIDE (APK for install and other mods coming soon!) The bootloader unlock is pretty similar to any other phone. Go to settings>about> click on build number until developer options are enabled. Go back and select system>Developer...
forum.xda-developers.com
Root guide (updated)
==== READ THIS POST BEFORE ROOTING ==== https://www.reddit.com/r/surfaceduo/comments/wn5joi/a_warning_to_wouldbe_developers_and_hobbyist/ (ORIGINAL GUIDE BELOW) Since the last guy hasn't been updating his op, I figured I'd start a fresh thread...
forum.xda-developers.com
Android 11 OTA Link & zip File, .img Files (Unlocked)
Hey friends! These are only for the unlocked Surface Duo. I am sorry At&t users. Here is the OTA link for Android 11: https://android.googleapis.com/packages/ota-api/package/a9bfdee15f2137f020fffded98b4bdee5d8bec8e.zip Link to the OTA.zip...
forum.xda-developers.com
Personally I've always been hesitant to provide pre-patched images. People just spam your inbox if it's not up to date five minutes after release. Also, people don't learn about what they're actually doing. I'd never be a developer today if I were just handed all the things I wanted to have and I suspect that'd be true of many of the best developers on this forum. That said, If there's a demand I'll make an updated full guide. Let me know in the comments on my original thread if you guys want that.
NTchrist said:
Personally I've always been hesitant to provide pre-patched images. People just spam your inbox if it's not up to date five minutes after release. Also, people don't learn about what they're actually doing. I'd never be a developer today if I were just handed all the things I wanted to have and I suspect that'd be true of many of the best developers on this forum. That said, If there's a demand I'll make an updated full guide. Let me know in the comments on my original thread if you guys want that.
Click to expand...
Click to collapse
I fully agree with you. I did magisk_patching for old nexus's, oneplus 6t, and a couple of the pixels and I actually didn't get that much spam. But go a ton of spam for system UI tweaks, twrp and such how-tos I posted.
The primary reason I provided a pre-patched one here is because I had a ton of issues getting payload dumper to work on my fresh windows 11. And this was just easier.
Finally a much more streamlined process, and it works perfectly. That back & forth patching each month was getting too hairy. Not too mention how much faster this device is now which has me into it all over again. This has all been worth it so far in my opinion based off of usage today. no random app crashes anymore , much better UI and control panel across the board, Hell it even sounds louder. I'm really happy with this update and root so far.
OK so I've got the AT&T variant (that I use as a secondary device with no SIM) that I've successfully flashed Android 11 onto using the filiphsandstorm script. I haven't reset the phone. Android 11 works fine so far like this. Unfortunately though I'm hanging on the boot screen when I fastboot the patched boot image. If I patch the boot image with an earlier version of Magisk it double boots and returns to the stock image. If I patch the boot image with the latest version of Magisk I get the boot hang. Obviously this could just be AT&T incompatibility but does anyone have any ideas? Has anyone with an AT&T device successfully rooted on Android 11?
-
delfuhd said:
OK so I've got the AT&T variant (that I use as a secondary device with no SIM) that I've successfully flashed Android 11 onto using the filiphsandstorm script. I haven't reset the phone. Android 11 works fine so far like this. Unfortunately though I'm hanging on the boot screen when I fastboot the patched boot image. If I patch the boot image with an earlier version of Magisk it double boots and returns to the stock image. If I patch the boot image with the latest version of Magisk I get the boot hang. Obviously this could just be AT&T incompatibility but does anyone have any ideas? Has anyone with an AT&T device successfully rooted on Android 11?
Click to expand...
Click to collapse
Dumb question on my part but are you booting the patched image or trying to flash it in bootloader?
Just making sure we are on the same page.
eqbirvin said:
Dumb question on my part but are you booting the patched image or trying to flash it in bootloader?
Click to expand...
Click to collapse
No problem. Not flashing, just trying to boot. From
adb reboot bootloader
I'm executing:
fastboot boot patchedboot.img
Trying to flash to the boot partition just gives me an error anyway.
Also, just to be clear, I've tried it with your patched image as well as a boot image that I extracted from payload.bin. Both same results.
EDIT: OK I bit the bullet and did a factory reset through recovery. I wanted to avoid this as it's a pain setting the device up again. However, this solved the problem. I was able to complete the steps above and successfully gained root permanently. Thank you for your help!
eqbirvin said:
Hello Friends,
Android 11 has finally been released for Duo 1 and the update makes this device what it should have been from the beginning. But root is always nice.
Luckily Android 11 has made rooting a bit easier as well.
Pre-requisites
Unlocked bootloader
adb/fastboot set up properly
understanding what adb/fastboot and basic commands using these tools
How to open a CMD/Powershell in a given location
Windows 10/11 (you can make this work for MacOS/Linux but that isn't what this guide is based on)
I do not know if this will for at&t version or not. I do not have the at&t model so I cannot verify.
Download this patched boot.img (link)
This is simply the Android 11 stock boot img patched with magisk 23, I just did the hard work for you because it is a pain in the butt to get payload unloader to work.
If you do not want to use my pre-patched boot that is understandable but at this time I am not providing a how-to on extracting the boot from the OTA. You can use the pre-existing root guide by @NTchrist and @Perseu5 to at least extract the stock boot and then patch it yourself, just make sure you use Magisk 23.
Install Magisk Manager 23 which is the current stable/beta build (link)
either via adb or manually
Open Magisk Manager Once after installation and before moving to the next step
Boot into bootloader
either from cmd adb while the device is booted via adb command
Code:
adb reboot-bootloader
or from issuing a reboot from the power menu and holding volume down while rebooting
or from power off, hold the power button and volume down for 3 seconds
Boot the patched boot.img you downloaded by opening a CMD in the location of the downloaded patched boot and issuing this command
Code:
fastboot boot patched.156.boot.img
The device will boot into Android system
Open Magisk Manager > Click "Install" > "Direct Install"
Maigsk will install and reboot
Your device is rooted
If there is enough demand, I will do a walk thought on extracting the stock boot and patching it because I understand some don't like to trust downloaded boots.
A huge thank you to @NTchrist and @Perseu5 for pathfinding this all and their amazing guides, give those guys some thanks and kudos please!
Unlocking Bootloader/ Magisk Attempt
MAGISK FULL GUIDE (APK for install and other mods coming soon!) The bootloader unlock is pretty similar to any other phone. Go to settings>about> click on build number until developer options are enabled. Go back and select system>Developer...
forum.xda-developers.com
Root guide (updated)
==== READ THIS POST BEFORE ROOTING ==== https://www.reddit.com/r/surfaceduo/comments/wn5joi/a_warning_to_wouldbe_developers_and_hobbyist/ (ORIGINAL GUIDE BELOW) Since the last guy hasn't been updating his op, I figured I'd start a fresh thread...
forum.xda-developers.com
Android 11 OTA Link & zip File, .img Files (Unlocked)
Hey friends! These are only for the unlocked Surface Duo. I am sorry At&t users. Here is the OTA link for Android 11: https://android.googleapis.com/packages/ota-api/package/a9bfdee15f2137f020fffded98b4bdee5d8bec8e.zip Link to the OTA.zip...
forum.xda-developers.com
Click to expand...
Click to collapse
Thank you very much for providing the patched boot and for the guide (although in my case I know the steps). You save me a lot of work. Excellent.
I got the AT&T version. I just booted the patched image from OP and it works. (i was having trouble patching the AT&T image. probably was my fault because i was using magisk v.24.1 rather than v.23)
Any one get a system update notification?
Quick question:
Can we use the generic boot image to get TWRP working on the Surface Duo?
eqbirvin said:
Any one get a system update notification?
Click to expand...
Click to collapse
Yes , a 565MB file !
How do we update and keep root?
diejuse said:
How do we update and keep root?
Click to expand...
Click to collapse
1st post ( thanks to NTchrist )
==== UPDATE WHILE ROOTED ==== Section
Root guide (updated)
==== READ THIS POST BEFORE ROOTING ==== https://www.reddit.com/r/surfaceduo/comments/wn5joi/a_warning_to_wouldbe_developers_and_hobbyist/ (ORIGINAL GUIDE BELOW) Since the last guy hasn't been updating his op, I figured I'd start a fresh thread...
forum.xda-developers.com
pvillasuso said:
1st post ( thanks to NTchrist )
==== UPDATE WHILE ROOTED ==== Section
Root guide (updated)
==== READ THIS POST BEFORE ROOTING ==== https://www.reddit.com/r/surfaceduo/comments/wn5joi/a_warning_to_wouldbe_developers_and_hobbyist/ (ORIGINAL GUIDE BELOW) Since the last guy hasn't been updating his op, I figured I'd start a fresh thread...
forum.xda-developers.com
Click to expand...
Click to collapse
This is actually no longer necessary on A11 in most cases. You can do the magisk "install to inactive slot" workflow here to ota and retain root
tl/dr:
magisk > restore images (do not reboot)
do ota (do not reboot)
magisk > install to inactive slot
reboot
done
NTchrist said:
This is actually no longer necessary on A11 in most cases. You can do the magisk "install to inactive slot" workflow here to ota and retain root
tl/dr:
magisk > restore images (do not reboot)
do ota (do not reboot)
magisk > install to inactive slot
reboot
done
Click to expand...
Click to collapse
Thanks, just did it with today's latest 2022.113.26 OTA !
Super easy
pvillasuso said:
Thanks, just did it with today's latest 2022.113.26 OTA !
Super easy
Click to expand...
Click to collapse
Updated to the latest , 2022.115.10 OTA
pvillasuso said:
Updated to the latest , 2022.115.10 OTA
Click to expand...
Click to collapse
Updated to the latest , 2022.215.137 OTA
pvillasuso said:
Updated to the latest , 2022.215.137 OTA
Click to expand...
Click to collapse
Same process as before?