Develop Bugs

[ROM][OFFICIAL][10.0] crDroid [dipper]

<!---This is a forum post template for manitainers to use on XDA, or whatever forum you post your build(s) on. You can copy/paste what is here and edit as necessary for your purposes-->
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
Copy crDroid zip, gapps zip, magisk zip
Boot into Recovery
Wipe cache, system, & data (or just cache for a dirty flash).
Flash ROM
Flash gapps
Flash Magisk
Boot up
Sources:
ROM: https://github.com/crdroidandroid
Kernel: https://github.com/LineageOS/android_kernel_xiaomi_sdm845
Download:
ROM https://crdroid.net/dipper
Changelog: https://raw.githubusercontent.com/crdroidandroid/android_vendor_crDroidOTA/10.0/changelog_dipper.txt
Known issues:
Visit official website @ crDroid.net
crDroid <device> Telegram
crDroid Community Telegram
Donate to help our team pay server costs

Thnks

Do you have a step by step coming from MIUI11

antharys96 said:
Do you have a step by step coming from MIUI11
Click to expand...
Click to collapse
Normally , you will lost your internal data after you flash from miui.
1. you must unlock your phone, the bootloader must be unlocked.
2. use fastboot to flash twrp
3. boot to recovery
4. use cable to copy Rom, magisk, gapp
5. wipe davik cache, system ,data
6. flash the rom, magisk, gapp
7. in wipe page ，format data，type yes to confirm.
8. reboot system , wait for new system.

Hi,
I just tried installing crDroid, since it seems well-maintained, includes signature patching support, and I want to switch to a microg installation. Unfortunately, I end up in a bootloop.
Here’s what I did:
* Boot TWRP 3.4.0-0
* Wipe: Cache, Dalvik, System, Data
* Sideload: fw_dipper_miui_MI8Global_V11.0.5.0.QEAMIXM_86e58a41cd_10.0.zip
* Sideload: crDroidAndroid-10.0-20200801-dipper-v6.8.zip
* Reboot into System
This leads to Mi logo ⇒ crDroid logo ⇒ No change for >5minutes. Upon observing adb logcat, I can see repeating patterns, although I’m not sure where exactly they start to loop, and where the loop ends ….
I deliberately did not flash any Magisk, MinMicroG-Installer or GApps as I wanted to get the bare rom to boot first.
I also tried a older crDroid, namely crDroidAndroid-10.0-20200326-dipper-v6.4.zip — this one boots just fine …
Did I do anything wrong? Before posting a big bad bunch of logcat, I’d love to know if I’m mistaken somewhere rather basic …
… Thanks for all the work you put into this ^_^
Best,
-NebuK

did you flash Dm verity.zip?

Great ROM
Also, battery is good and the user interface is liquid smooth. Regarding that matter THE best ROM out there.
But It's still buggy a little bit for me.
For example the dialer needs to be closed and reopened to properly display information about calls that are just made or just deleted. It doesn't refresh UI automatically.
.zip i attached bellow contains a .mp4 video that describes the dialer UI update problem i'm facing. Also, camera app crashes if you fiddle with its settings and needs the device reboot to be able to use it again.
Hope they fix these tiny problems.

I wiped system and caches, formatted data, flashed V11.0.5.0.QEAMIXM firmware, crDroid, OpenGapps and a disable forced encryption zip. My phone only boots to fastboot. Luckily, I can still boot into TWRP.
Does crDroid not like having encryption disabled, or have I done something else incorrectly?
EDIT: I tried again and it worked when I didn't flash DFE. The Mi8 doesn't like DFE?
Also, swiping down in recent apps doesn't clear the recent apps list, despite it being enabled in the home screen settings (long-press on the home screen-> settings-> miscellaneous).

Hi! Does not pass the Safetynet check. Will this be fixed?

Hey. Can't install version 7. After booting the system, the initial settings do not work. What am I doing wrong?

Smooth Android 11 ROM using Nikgapps.

Is there a way to use face unlock with the MI 8 infrared camera to unlock the phone in the dark? And also the battery bar (crDroid Settings, Status bar) can't be really used because of the device cutout(can't really see it), and it can't be moved.
Otherwise it's a great beta ROM.

Can anyone post MD5 sum of file final release crDroid version 6.12 named "crDroidAndroid-10.0-20201115-dipper-v6.12" please?
I have issues with downloading.

Thank you for your beautiful works!
The bluetooth can be connected to the speaker but there was no sound at all.

A perfect ROM on Android 11.
Thanks developer

NFC is nowhere to be found, not even in search bar, in quick settings it's greyed out so not available, only me?

The Rom is really good my only trouble is signal/reception is poor. Getting no signal in my house whereas normally I'd get minimal 2 or 3 bars.
UPDATE: flashing latest firmware fixed issue.

burgess_boy said:
The Rom is really good my only trouble is signal/reception is poor. Getting no signal in my house whereas normally I'd get minimal 2 or 3 bars.
Click to expand...
Click to collapse
Did you try to update to latest firmware?

predragiPredrag said:
Did you try to update to latest firmware?
Click to expand...
Click to collapse
Yes I did and that fixed the issue.

Trying the last crdroid 11 , only bug for me in Android auto Not working...
Any advices ?

[ROM][13.0][OFFICIAL] Pixel Experience for Mix 3 5G [andromeda]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Mi Mix 3 5G [andromeda]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 13.0
Whats working?
Wifi
RIL
Mobile data (including 5G)
GPS
Camera
Flashlight
Camcorder
Bluetooth
Fingerprint reader
NFC
Lights
Sound / vibration
Facelock
VoLTE
VoWiFi
Known issues/Bugs
You tell me
DON'T FLASH GAPPS, ALREADY INCLUDED
Download from Pixel Experience website
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Telegram channel
Our Telegram channel
Our blog​
Build author: Inkypen
Source code: https://github.com/PixelExperience
Kernel source code: https://github.com/PixelExperience-Devices
ROM Developer: jhenrique09

Additional installation instructions if coming from stock MIUI:
In order to install a custom ROM you must have an unlocked bootloader. You can apply for this at Xiaomi's official site: https://en.miui.com/unlock/
You then need to install a custom recovery. Official TWRP builds are available, and the official maintainer has a thread with installation instructions here: https://forum.xda-developers.com/mi...covery-unofficial-twrp-xiaomi-mi-mix-t3941867
Once you have TWRP installed, boot into recovery mode. Wipe cache,dalvik,system,vendor partitions.
The official TWRP for Mix 3 5G cannot decrypt A12+ encryption scheme so if you see scrambled filenames in recovery mode and want to access your files then use my unofficial build (version 3.7.0-12.0).
https://sourceforge.net/projects/xiaomi-andromeda/files/twrp-3.7.0_12-0-andromeda.img/download
You are strongly advised to flash the latest modem firmware. You can grab that here:
https://xiaomifirmwareupdater.com/firmware/andromeda/
This only needs to be done once, once the updated firmware has been flashed you can forget about it. If you get any warnings while trying to flash the firmware just delete "compatibility.zip" from inside the firmware zip.
WARNING: You will lose all saved files on your internal storage in the next step, make a backup of important files before proceeding
Data partition must be formatted (not wiped) to remove MIUI encryption. Use the bottom right "Format Data" button in the Wipe menu. You will be asked to type "yes" to confirm your choice.
At this point your internal storage will be empty. Copy the ROM from your PC to the phone, click install in TWRP and select the ROM. If you wish to install magisk or any other zips, copy it to the phone and install after the ROM. Once you have flashed the ROM and any add ons, you must format internal storage again as it must be completely empty for the very first custom ROM boot.
Reboot back to system and enjoy custom ROM goodness

To finish off the true Pixel experience, most users would like to install Google Camera. Unfortunately most gcam ports don't work very well on this device. The most compatible version that was found by the testers on the Mix 3 5G telegram group (https://t.me/mimix3_5G) is this build by Urnyx: https://f.celsoazevedo.com/file/cfiles/gcm1/GCam_7.3.018_Urnyx05-v1.9.apk
This version has full 1080p/60fps and 4k/30fps support on the rear camera, but the front selfie camera will cause the app to crash.
The stock camera works fine with selfies and also starts when you open the slider. If you really want gcam, I would advise to install Urnyx's port and set the slider to open stock camera. Best of both worlds

Great ROM phone works better than ever. One question though, I'm unable to update Chrome, is there a work around?

Yes just go to apkmirror and download the latest chrome APK sorted it for me

Custom rom installed, I'm starting testing

Hi,
First of all, thanks for your work. I have 2 question, first I saw that this rom seems to in selinux permissive mode, do you intend to try to get in enforcing mode?
Second, I'm new to Pixel Experience (more used to lineageos) what is the difference between the normal an the "plus edition"
Thanks

ARCore doesn't seem to be working (incompatible) with PE currently without rooting the device and changing the fingerprint. Any fix soon?
Also a port of Gcam that works on the device is called pixelcam 2.0 and the gcam it is based on, although you have to mess around in the settings to recognise both the telephoto and rear camera. The only things that don't work is blur and focus tracking, although the gcam port it's based on does do these correctly, it doesn't detect the telephoto lens. (The front 'selfie' flash doesn't work on both)
[EDIT]: FOR THE PEOPLE THAT GET INTO A SOFT LOCK AFTER FORMATTING YOUR PHONE.
You have to use the official miui tools (miflash) (https://androidmtk.com/download-xiaomi-mi-flash-tool) as well as appropriate fastboot miui rom (the file you want ends in .tgz)(https://xiaomifirmwareupdater.com/archive/miui/andromeda/).
After downloading your files, put miflash in the root directory of your C:\ drive. Then keep on extracting the rom archive untill you end up with a folder and also put it in the root directory of your C:\ drive.
Reboot the phone into fastboot mode and connect it to your computer.
Then use miflash, select the rom folder, and completely wipe and reflash your phone (remembering to select the option to not relock the bootloader). If the flash fails, try changing your cable.
You then allow for a couple of minutes for miui to start and format the internal storage.
After the set-up screen appears, you go into fastboot and flash the custom recovery (TWRP) (https://dl.twrp.me/andromeda/). Go into the recovery and copy across your zip files for PE and optionally Magisk. Then wipe the dalvik, system, and cache. Then immediately flash your zips.
Don't format your data otherwise you end up back at step 1.
Then restart and boot back into the recovery and wipe data and internal storage. Then boot into PE.
Edit 2: Or you can just flash vbmeta as shown further in the thread.
Inkypen said:
You have tripped AVB (Android Verified Boot) which can be disabled by flashing a modified vbmeta image. All of my ROMs contain the disabled vbmeta image, but when coming from MIUI for the first time sometimes the enabled vbmeta persists and you got this load error. The following steps assume you have working fastboot and drivers, which must be true otherwise you wouldn't be able to install TWRP lol
Download this: https://www.androidfilehost.com/?fid=2188818919693780960
Reboot into fastboot mode (hold volume down button while resetting phone)
Connect to PC and type the following in a terminal:
fastboot flash vbmeta vbmeta.img
The authenticate error will now be gone and you can try to install the ROM again.
Click to expand...
Click to collapse
[edit 3]: A method to get gpay working is avalible here:
Magisk-safety net verification error / Google pay
I can't use a credit card via google pay. Google pay writes that I have a root device even though it is marked in magisk in exceptions. Magisk show - safety net verification error. Please help. Thanks
forum.xda-developers.com
Releases · stylemessiah/GPay-SQLite-Fix
A magisk module that ONCE allowed Google Pay to work on rooted phones - stylemessiah/GPay-SQLite-Fix
github.com

Question for Mi Mix 3 (no 5g)
Good evening everyone. Quick question. I search at the official pixel experience site for Mi mix 3, and I only find Mi Mix 3 5G.
Is it the same? Compitable with Mi Mix 3 (no 5G)

Search Andromeda

tomguymer said:
Search Andromeda
Click to expand...
Click to collapse
Andromeda is Mi Mix 3 5G, I think you meant ‎"perseus"

Shiblyx said:
Good evening everyone. Quick question. I search at the official pixel experience site for Mi mix 3, and I only find Mi Mix 3 5G.
Is it the same? Compitable with Mi Mix 3 (no 5G)
Click to expand...
Click to collapse
The Mix 3 (codename perseus) has completely different hardware (Snapdragon 845 vs Snapdragon 855) compared to the Mix 3 5G (codename andromeda) which makes them completely incompatible with each other.

Phone doesn't want to charge when it reaches zero battery (device shut down) unless its booted into recovery mode (TWRP).
Not 100% sure where to report bugs so I'm putting it here.

UnderscoreKer said:
Phone doesn't want to charge when it reaches zero battery (device shut down) unless its booted into recovery mode (TWRP).
Not 100% sure where to report bugs so I'm putting it here.
Click to expand...
Click to collapse
Yes I have experienced the same issue plus my phone isn't fast changing with the official charger and usb cable supplied.

I'm aware of the offline charging bug and I already have it fixed in my testing builds. For now just hold volume up button when connecting charger so that it boots in to recovery mode.

You should use anx camera with this Rom instead of Google camera
To anyone using this rom, anxcamera is a must have! It's the miui camera ported over to AOSP and everything is working fine (incudes front flash, 960fps slow motion, 4k h265, filters and effects and the lot) I haven't experienced any bugs with it either and the quality in on par with the Google camera app. Download from the official website as the developer closed his xda forum

Nobodyisme said:
To anyone using this rom, anxcamera is a must have! It's the miui camera ported over to AOSP and everything is working fine (incudes front flash, 960fps slow motion, 4k h265, filters and effects and the lot) I haven't experienced any bugs with it either and the quality in on par with the Google camera app. Download from the official website as the developer closed his xda forum
Click to expand...
Click to collapse
What version and fix did you install to get everything working? I would like to know because I also like MIUI Camera

mensoif said:
Andromeda is Mi Mix 3 5G, I think you meant ‎"perseus"
Click to expand...
Click to collapse
I have the ROM on my phone. It is great except for sliding the screen, and no 5G.

I flashed the latest build 185 and the "ANXCustLibs For Q" although I tired the "48MPFixQ_181.GlossyIntelligentCock.zip" file too which also worked perfectly. I installed it using magisk
Inkypen said:
To finish off the true Pixel experience, most users would like to install Google Camera. Unfortunately most gcam ports don't work very well on this device. The most compatible version that was found by the testers on the Mix 3 5G telegram group (https://t.me/mimix3_5G) is this build by Urnyx: https://f.celsoazevedo.com/file/cfiles/gcm1/GCam_7.3.018_Urnyx05-v1.9.apk
This version has full 1080p/60fps and 4k/30fps support on the rear camera, but the front selfie camera will cause the app to crash.
The stock camera works fine with selfies and also starts when you open the slider. If you really want gcam, I would advise to install Urnyx's port and set the slider to open stock camera. Best of both worlds
Click to expand...
Click to collapse
Inkypen said:
Additional installation instructions if coming from stock MIUI:
In order to install a custom ROM you must have an unlocked bootloader. You can apply for this at Xiaomi's official site: https://en.miui.com/unlock/
You then need to install a custom recovery. Official TWRP builds are available, and the official maintainer has a thread with installation instructions here: https://forum.xda-developers.com/mi...covery-unofficial-twrp-xiaomi-mi-mix-t3941867
Once you have TWRP installed, boot into recovery mode. Wipe cache,dalvik,system,vendor partitions.
The offical TWRP doesn't currently support F2FS encryption (as of version 3.4.0-0) so if you wish to make use of F2FS you can use my unofficial build. EXT4 partitions are unaffected.
https://mega.nz/file/aVwSHCZC#VkJV3Mby5pQmxzVcI500EB0jBPqMX76PlVJHwJh6MB4
You are strongly advised to flash the latest modem firmware. You can grab that here: https://sourceforge.net/projects/xiaomi-andromeda/files/firmware.zip/download
WARNING: You will lose all saved files on your internal storage in the next step, make a backup of important files before proceeding
These builds have encryption enabled so it may be possible to directly install without formatting data, but this is completely untested by me.
Data partition must be formatted (not wiped) to remove MIUI encryption. Use the bottom right "Format Data" button in the Wipe menu. You will be asked to type "yes" to confirm your choice.
At this point your internal storage will be empty. Reset the phone and go back into recovery. Copy the ROM from your PC to the phone, click install in TWRP and select the ROM. If you wish to install gapps/nanodroid, copy it to the phone and install after the ROM.
Reboot back to system and enjoy custom ROM goodness
Click to expand...
Click to collapse
zmbk said:
What version and fix did you install to get everything working? I would like to know because I also like MIUI Camera
Click to expand...
Click to collapse

Bug fixes
Will there be bug fixes for not functioning ai button settings or live display settings? The first ones don't work and live display resets after a while.

LIR GSI Rom for Nord N10 5g

For these of you who wanna try good custom rom instead buggy roms filled with same google ****. I got good expierience with these GSI roms. On my Nokia 7.2 I'm running Bless 306 and on Nord N10 5g i'm using LIR as my daily drive. Keep in mind I'm not gamer.Here is the link to the rom:
[UNOFFICIAL] LineageOS R Mod //LiR
L i R < Your warranty is now void! > We're not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in...
forum.xda-developers.com
Installation;
First at all my cell was already on Android 11, not sure about 10. 2nd it's my expirience and my opinion.
fastboot flashing unlock and then fastboot flashing unlock_critical
dev mode enabled
adb reboot bootloader
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
If you got error like these
Code:
fastboot flash system.img
Invalid sparse file format at header magic
Resizing 'system_a' FAILED (remote: 'Not enough space to resize partition')
fastboot: error: Command failed
DON"T DO as same advised fastboot delete-logical-partition product you will got problems when return back on stock ,with Magisk or installing diff roms. If you already did read guide about phones with dynamic partitions https://forum.xda-developers.com/t/tutorial-magisk-on-gsi-on-devices-with-dynamic-partition.4311045/, download product_gsi.img form there and do.
fastboot flash product product_gsi.img
fastboot flash system lir-v313+211012-arm64-bvZ.img. I used image w/o google staff
fastboot -w
fastboot reboot
Setup and enjoy
Root avalible in Settings/Misc features/SuperUser or use Magisk 23
For SMS/MMS I installed ims apk for Qualcomm vendor .You find it in Settings/Phh Treble Settings/Misc (see pics)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Well put, I flashed and booted the crdroid11 gapps gsi with oxygen 11 firmware following this, booted on the first attempt, twenty minutes after oneplus gave unlock token. twrp does not go into fastbootd, had to use stock recovery after initial backup. Sanity returns, been without rooted device over two months.

Glad it helps. Yes twrp not fully working avoid it. I forgot to mention to use stock recovery or recovery from any roms posted in this forum (derpfest,oneplus or lineage). They are same.

Wow, do biometrics work on this GSI?

It based on PHH's AOSP R and AndyYan Lineage GSI. All errors same, but fingerprints working.They have versions with Gapps but I don't use them. I'm don't need custom ROM with Google. Pointless! Rooted and debloated stock OxygenOS in my opinion is best way in that case.
Buy the way I'm thesting right now latest Phh AOSP 400.d with Android 12. It works flawless on my phone.

boom15 said:
It based on PHH's AOSP R and AndyYan Lineage GSI. All errors same, but fingerprints working.They have versions with Gapps but I don't use them. I'm don't need custom ROM with Google. Pointless! Rooted and debloated stock OxygenOS in my opinion is best way in that case.
Buy the way I'm thesting right now latest Phh AOSP 400.d with Android 12. It works flawless on my phone.
Click to expand...
Click to collapse
If A12 GSI has fingerprint working on N10 5G, it'll be a perfect daily driver. Getting annoyed with all bloat. Does 5G work properly too?

UsedNametag said:
If A12 GSI has fingerprint working on N10 5G, it'll be a perfect daily driver. Getting annoyed with all bloat. Does 5G work properly too?
Click to expand...
Click to collapse
I don't have 5g plan, can't tell you. On last version of android 11 it used to show you option to change to 5G/LTE/3G/2G. On Android 12 it not shows on my phone.Fingerprints working.
And couple glitches if you try it. In my case after setup preferred mobile network setuo on 3G, so change it . Install ims. Check post above.BT,Camera,Sound, Storage,Tethering,OTG,Seedvault, AdAway, Google Maps and su working. I'm using arm64-ab-vndklite-vanilla on top of Android 11 with unlocked bootloader,stock boot and recovery. Not sure about any fancy stuff and banking apps.

Yes five 5G works on this one and all the gsi's on that source forge. And it works on a11 firmware(I haven't tried 10 firmware), I keep reading we're stuck on 10 for gsi's, that has not been my experience at all! Also the product_gsi.img is the proper method over deleting the product partition.
You can install Google's 12 gsi(on 11 firmware as I tested it), I grabbed the image from /data/gsi/dsu after downloading it through dsu loader in developer setting. The gsi's it seems attempt dsu install, I think OnePlus would need to enable it, it ends up booting whatever system you have installed with the new blank userdata image. The would-be Google 12 gsi system will flash with fastboot.

mrbox23 said:
Yes five 5G works on this one and all the gsi's on that source forge. And it works on a11 firmware(I haven't tried 10 firmware), I keep reading we're stuck on 10 for gsi's, that has not been my experience at all! Also the product_gsi.img is the proper method over deleting the product partition.
You can install Google's 12 gsi(on 11 firmware as I tested it), I grabbed the image from /data/gsi/dsu after downloading it through dsu loader in developer setting. The gsi's it seems attempt dsu install, I think OnePlus would need to enable it, it ends up booting whatever system you have installed with the new blank userdata image. The would-be Google 12 gsi system will flash with fastboot.
Click to expand...
Click to collapse
Thank you for advise. I tried google before phh.Prefer phh.Maybe because of name goo.... Long time using phones without less google stuff if possible. Used CalixOS on my last Pixel until it decided to jump from cliff!
But any way I build my own using phh code, implement some changes related to phone and provider (ims, mobile network detection, ril, bt headset connection,MicroG).

boom15 said:
Thank you for advise. I tried google before phh.Prefer phh.Maybe because of name goo.... Long time using phones without less google stuff if possible. Used CalixOS on my last Pixel until it decided to jump from cliff!
But any way I build my own using phh code, implement some changes related to phone and provider (ims, mobile network detection, ril, bt headset connection,MicroG).
Click to expand...
Click to collapse
I somehow disabled my accelerometer, and proximity sensor. I did the usual msm restore, to no avail. I'm stumped. It broke after a botched fastboot flashing. How might you approach such a situation? You might have experience with something like making an overlay specific to a device? I am so stumped with this, I have reflashed every partition I can find from payload bins and ops files....I use one of those sensor apps(the one in phh settings shows nothing at all, or crashes) more than one says simply "this device has no sensors"

mrbox23 said:
I somehow disabled my accelerometer, and proximity sensor. I did the usual msm restore, to no avail. I'm stumped. It broke after a botched fastboot flashing. How might you approach such a situation? You might have experience with something like making an overlay specific to a device? I am so stumped with this, I have reflashed every partition I can find from payload bins and ops files....I use one of those sensor apps(the one in phh settings shows nothing at all, or crashes) more than one says simply "this device has no sensors"
Click to expand...
Click to collapse
Check if you have /persist/sensors first. If you on stock try factory mode as someone sugested here on these forum.

Life after Root pt 2

Ok, so I have been experimenting and torturing this device for months now and I still love it. I have learned sooo much using this as my test bunny for all the cool custom ROMS and extra bells and whistles that it can possibly throw at it and in it. I owe it all to everyone that posts in this forum and XDA. I learned all this stuff from you,
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and it has become a passion of mine now. I have experimented with other devices as well using knowledge and tools acquired here. And now here I am today.
This is my current set up:
Nord N10 5G T-mobile US Variant
I used MSM tools and some file manipulation to kill the T-mobile issue {evil grin} thanks to "some random username: and "Kronflux"
* =sorry fellas if I goofed up your nicks
I installed a stable working release of Android 12 running on a Pixel 5 GSI from ErfanGSI.Tools
I am rooted thru Magisk 23 using a *PE boot image and flashed patch thru Platform tools (the old school method)
I use Nova Prime Beta as a launcher
*does not pass safety net but can run and use most all mods work
It runs very smooth, however Chrome does *not work yet all other Google crap seems to be fine.
5G WORKS!!!! There is a hardware error on bootup, but it doesn't flake out.
Battery life is terrific, and it doesn't get hot.
No camera app with this GSI but I have an app I prefer, and it performs perfect.
90hz refresh has to be forced in dev options.
No SD access from PC only access thru device
All the sudzie powers of Hell and Android 12 work perfectly.
Overall this build is great, and it's running Android 12!! A12 is not going to be awarded the chance to run officially on this device so it makes me happy to run it "our way"!
All software install and mods were performed using the newest Platform tools with ADB and fastboot. Also, I used the latest lineage recovery during the setup.
No TWRP, no sideloads. This is a GSI not a ROM.
Again, big thanks to you all for making these things available.
#XDA rocks!

You on 10 firmware? There's no reason you shouldn't get 5G I have metro and this phone rocks 15-20 mb down, and 5g all day. My goal is to hit a terrebyte of data in a month. I'm eight days in the cycle and have 90 gigs so far, 3x the throttle limit. I think the 5g radio likely has to do with the 10.x firmware. I know it's written here and telegram that customs only run on 10 firmware, however I've been running a11 treble gsi's on 11 firmware the whole time, The gsi's from lir lineage post run perfect on 11 firmware,
https://forum.xda-developers.com/t/lir-gsi-rom-for-nord-n10-5g.4353167/
as for safety net, magisk hideprops does the trick with a quick setup. everything workings on these phones, double tap to wake, bluetooth, wired headsets, i hear trouble with nfc, google pay has worked the couple times i tried(thats how i confirm safety net).
One plus are nice phones right? Ive had the 6t and have my sights on 8t as well, 6t i had dualboot and it runs postmarketos with mainline 5.x linux kernel. all oneplus phones far as i know, including this one, support monitor mode and wifi with hotspot at the same time, they are nethunter friendly.
My favorite with this phone though, is the stereo speakers, loudest phone in my circle of friends, and decent quality.
Have fun hacking your phone!

mrbox23 said:
You on 10 firmware? There's no reason you shouldn't get 5G I have metro and this phone rocks 15-20 mb down, and 5g all day. My goal is to hit a terrebyte of data in a month. I'm eight days in the cycle and have 90 gigs so far, 3x the throttle limit. I think the 5g radio likely has to do with the 10.x firmware. I know it's written here and telegram that customs only run on 10 firmware, however I've been running a11 treble gsi's on 11 firmware the whole time, The gsi's from lir lineage post run perfect on 11 firmware,
https://forum.xda-developers.com/t/lir-gsi-rom-for-nord-n10-5g.4353167/
as for safety net, magisk hideprops does the trick with a quick setup. everything workings on these phones, double tap to wake, bluetooth, wired headsets, i hear trouble with nfc, google pay has worked the couple times i tried(thats how i confirm safety net).
One plus are nice phones right? Ive had the 6t and have my sights on 8t as well, 6t i had dualboot and it runs postmarketos with mainline 5.x linux kernel. all oneplus phones far as i know, including this one, support monitor mode and wifi with hotspot at the same time, they are nethunter friendly.
My favorite with this phone though, is the stereo speakers, loudest phone in my circle of friends, and decent quality.
Have fun hacking your phone!
Click to expand...
Click to collapse
I need to change the part about 5G It works!! Yes, I started from scratch with an MSM build from A10, swapped the T-mobile crap out and made it International during set up, flashed GSI, flashed* PE boot.img then patched Magisk file. All works perfectly now other that the hardware error during GUI launch at boot time {due to processor I imagine} This phone is a beast. I have run every single available ROM I could put in it with no problems. I want to run Derpfest 12 as soon as I can find a stable one. I actually got Derp 12 to run but it wasn't even for this device!! Ive even run dual boot chaos and havoc on this thing once I figured the A/B thing out. This is my first year testing and studying development on my own so it's really exciting.

After bricking it, I did:
msm international
ota from 10 to 11.02
from there its ota again to 11.03(right back to slot a)
I run debloater, toggle unlock oem, flash token,
"fastboot flashing unlock_critical" next boot is flash the vbmeta images with --disable-verity --disable-verification then flash recovery from pixel experience and sideload magisk via adb. I avoid flashing a patched boot image over a stock on devices with shared blocks, so recovery via sideload or through orange fox/twrp/booted system works as well.
Deleting partitions on any oneplus is bad etiquette as I've learned from other devices, there's a product_gsi.img linked in lir post or make a 16kb blank sparse image to flash as a "place holder" for the partition. i use crdroid11 w gapps on system_a with an already patched boot. Another important detail is to use the platform-tools from sdk website, reboot to bootloader to flash and use fastboot -w if y= you'll see the android's custom f2fs utility do it's thing. Right here you would have the the a11 phh_based gsi a stable 5g radio, you have to enable ims in settings, along with the apn, to get calls and text going you install ims apk from phh settings, that's also where you turn on auto brightness, disable a2dp offloading for bluetooth, enable dt2w and I forget to mention check the safety net box. I go as far as to patch the super image resize vendor/system to allow rw and a little wiggle room to disable force encryption, then add a bootanimation.zip from the op6 crdroid.

mrbox23 said:
After bricking it, I did:
msm international
ota from 10 to 11.02
from there its ota again to 11.03(right back to slot a)
I run debloater, toggle unlock oem, flash token,
"fastboot flashing unlock_critical" next boot is flash the vbmeta images with --disable-verity --disable-verification then flash recovery from pixel experience and sideload magisk via adb. I avoid flashing a patched boot image over a stock on devices with shared blocks, so recovery via sideload or through orange fox/twrp/booted system works as well.
Deleting partitions on any oneplus is bad etiquette as I've learned from other devices, there's a product_gsi.img linked in lir post or make a 16kb blank sparse image to flash as a "place holder" for the partition. i use crdroid11 w gapps on system_a with an already patched boot. Another important detail is to use the platform-tools from sdk website, reboot to bootloader to flash and use fastboot -w if y= you'll see the android's custom f2fs utility do it's thing. Right here you would have the the a11 phh_based gsi a stable 5g radio, you have to enable ims in settings, along with the apn, to get calls and text going you install ims apk from phh settings, that's also where you turn on auto brightness, disable a2dp offloading for bluetooth, enable dt2w and I forget to mention check the safety net box. I go as far as to patch the super image resize vendor/system to allow rw and a little wiggle room to disable force encryption, then add a bootanimation.zip from the op6 crdroid.
Click to expand...
Click to collapse
Man you are pretty savvy with this stuff.!! That's awesome!
I learn more every day. I'm trying to decide what my next device project will be. I admit i still like messing with this one lol

[TESTING] TrebleDroid - Android 13 for SM-A730F/DS

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
A couple of days ago my mom gave me this phone. So, i want a new Android (and kick the s**t out all the bloatware of Samsung). After several tries, i make TrebleDroid vanilla works. And really good! Hell, even shows dual sims!
...And since there's no trace of someone doing this (or a guide), here are the steps. It was trial and error but i did it and it worked. (Sorry for english, i'm a native spanish speaker):
On original firmware:
- Activate OEM unlock in Developer Options
- Enable USB debugging
This is the version I used for Android 13 (at the moment, system-td-arm64-ab-vndklite-vanilla.img.xz from ci-20230510)
Releases · TrebleDroid/treble_experimentations
Scripts to automatically build/CI/Release TrebleDroid GSI - TrebleDroid/treble_experimentations
github.com
Vendor-Quack is required for SaR.
[SAR][Vendor][10][A530F/A530W/A730F] Vendor Quack V2.5 For Galaxy A8/A8+ 2018
Dude did you tried to enable magisk hide from settings? That should pass safety net on all Android 10+ roms :) Hey, i'm succesfully flashed magisk 21.1 beta version with safety net passed on Android R
forum.xda-developers.com
Vendor-Quack_V2.6
MediaFire is a simple to use free service that lets you put all your photos, documents, music, and video in a single place so you can access them anywhere and share them everywhere.
www.mediafire.com
To load TWRP and change the system to Treble-compatible, instructions here. Download TWRP-jackpot2lte-Treble.img and TrebleCreator-A730F.zip
[GUIDE][TREBLE][A730F] Project Treble Guide for Galaxy A8+ 2018 (18/04/2019)
Project Treble Guide for Samsung Galaxy A8+ Just to make it clear I'm not responsible for whatever damage this could possibly cause to your device. Treble is everywhere, so why shouldn't we join it? I'm proud to announce that Galaxy A8+...
forum.xda-developers.com
ONCE TWRP IS LOADED, THE PHONE SHOULD NOT BE RESTARTED OR IT WILL BE OEM LOCK AND YOU WILL HAVE TO INSTALL THE ORIGINAL FW AND DO THE TRICK TO ELIMINATE THE KG-RMM STATUS:
[GUIDE][17.06.2019] RMM/KG bypass - Root/Install TWRP on Exynos Samsung after 2018
UPDATE 17.06.2019 - NEW RMM/KG bypass patch UPDATE 23.02.2019 - Pie and more Please take some time and read carefully the whole post. I am not and i won`t be responsable for anything. Disclaimer I am not responsible for bricked devices, dead...
forum.xda-developers.com
download patch:
https://forum.xda-developers.com/attachments/rmm_bypass_v3_corsicanu-zip.4778435/
YOU MUST LOAD THE PATCH.
In my case to not wait 7 days:
RMM a730f
I commented my experience on my a730f with bit 4, 1.- After flash rom, select a manual date 10 days before the current date. 2.- remove the automatic update option, and select manual download, then restart. 3.- Verify that the phone shows the...
forum.xda-developers.com
1.- After flashing OEM rom, select a manual date 10 days before the current date of the phone.
2.- remove the automatic update option, and select manual download, then restart. Check that developer options is disable.
3.- enter google and samsung account on the phone.
4.- wait 3 hours (in my case, less. 1 hour), enable developer options and there will be the OEM unlock enabled.
With ODIN load TWRP-jackpot2lte-Treble.img (it's version 3.2.3 - 3.3.0 didn't give me good results)
All of the following steps refer to TWRP:
- After installing TWRP without entering the rom, /data must be formatted. After that, reboot into recovery mode using the reboot menu. If /data is not formatted, the partitions will remain encrypted and the rest cannot be wiped.
-------------------------------------------------- -----------------------
From now on, every time you make a change, you must reboot, because without this step, loading anything via TWRP will fail (if you didn't reboot, the rom will not start or froze, or the zip will not load correctly, or you'll see partition access errors on the log). ALL STEPS MUST BE FOLLOWED OR THE SYSTEM WILL REMAIN ON THE ANDROID LOADING SCREEN FOREVER.
-------------------------------------------------- -----------------------
- After reboot, Wipe in /cache,/vendor (if it exists. Otherwise it will be created later),/system,/data,/dalvik. Reboot into recovery mode using the reboot menu.
- Load TrebleCreator-A730F.zip. It will create the partitions for treble. It has an automatic reboot. After the reboot it should show the script and then reboot again and go back to TWRP. If the automatic reboot does not happen and the script screen doesn't show up, you will have to start again from the /data format step. It is vital since the automatic reboot and script screen indicates that the partitions were all correctly loaded.
- Load RMM_Bypass_v3_corsicanu.zip. This is to bypass the OEM lock. It should be done before Vendor-Quack, as the vendor zip encrypts the /vendor partition and makes it inaccessible. Reboot into recovery mode using the reboot menu.
- Load Vendor-Quack_V2.6.zip. Reboot into recovery mode using the reboot menu.
- Finally, the .img of Android 13. One last reboot to recovery and THEN reboot to system.
After this the rom should start without problems. TWRP builds with treble are now LOCKED once booted. When trying to enter recovery, they get frozen at the TWRP boot screen. In order to load gapps, you must load the "latest" version of TWRP (in quotes because TWRP version 3.7.0 does not load since it is larger than the /boot partition. In this case, you must load 3.6.2 ) using Odin and Download mode.
Download TWRP for jackpot2lte
Download TWRP Open Recovery for jackpot2lte
dl.twrp.me
Once the latest version of TWRP is loaded, the zips can be loaded without problems. IN THIS VERSION OF TWRP IT IS SUGGESTED NOT TO MAKE ANY CHANGES. ZIP INSTALLATION ONLY. Surely something will ruin this version of twrp if something is done with it since it does not show the /vendor partition.
Gapps that works: NikGapps. That's it
Go! Get crazy and share the results!
THINGS THAT DONT WORK SO FAR:
- Lantern (with the system doesn't work. If u use flash on camera, WORKS)
- Brightness is very picky. (on settings you'll find "Phh Treble Settings". There are some extra functions disabled -- by default? -- go check and see whats best for u. BUT! Careful, Icarus. Don't mess with stuff u dont know.)
- i don't have a SIM at the moment, so i can't tell if phone works.
- Root? Don't need it. Don't know if it's working.
THANKS TO:
@phhusson for TrebleDroid and Exynos updates, and aaaall his long work!
@prashantp01 for Vendor_Quack, Treble, and the patched TWRPs for this phone.
@corsicanu and all the people behind the KG bypass patch.
@juankp9086 for the guide to reset KG status.
aaand finally the team behind TWRP.

Is this a GSI? If not, you MUST provide the source you used for your kernel, as required by the GPL Policy.
Further, did you base this on someone else's work? You MUST give credit where due, per the Forum Rules.

V0latyle said:
Is this a GSI? If not, you MUST provide the source you used for your kernel, as required by the GPL Policy.
Click to expand...
Click to collapse
Yes. It's a GSI from @phhusson. All vanilla, no modification whatsoever. Kernel is included on Vendor_Quack, a SaR posted here too, from @prashantp01 . All is based on guides and files from this same forum (and all files and sources are linked here), except the steps.
V0latyle said:
Further, did you base this on someone else's work? You MUST give credit where due, per the Forum Rules.
Click to expand...
Click to collapse
No problem. I'll quote everyone involved for making this Done
As for the steps, as i said, it was trial and error. There was no guides or something that i know of (FOR ANDROID 13). I just take a leap of faith based on last good know version working (Android 11) and use that, since Android 12 was no good in some details.

BernoO said:
Yes. It's a GSI from @phhusson. All vanilla, no modification whatsoever. Kernel is included on Vendor_Quack, a SaR posted here too, from @prashantp01 . All is based on guides and files from this same forum (and all files and sources are linked here), except the steps.
Click to expand...
Click to collapse
A GSI does not include a kernel, but since you linked to an established project that already has a published source, everything is good.
Thank you for adding credits.
I don't know if you saw this, but the Magisk installation instructions include details on how to defeat KG/Vaultkeeper.

Did Android 13 worked for you , and did you try setting lock as that seems to cause a bootloop .
If it worked can you tell me how you did it as my phone's seems to bootloop after trying to set a lock (pin,etc) on Android 12 and 13 and I have already tried PixelExperience and LineageOs .

NVM wrong topic

AlphaMaster08 said:
Did Android 13 worked for you , and did you try setting lock as that seems to cause a bootloop .
If it worked can you tell me how you did it as my phone's seems to bootloop after trying to set a lock (pin,etc) on Android 12 and 13 and I have already tried PixelExperience and LineageOs .
Click to expand...
Click to collapse
Can confirm. Since i was just testing, didnt need to lock it. After trying to set a pattern or pin lock (and systemUI crashes), ive reboot and then a soft bootloop (for 3 seconds i can see lock screen, then android boot screen, 3 sec lock screen and so...).
After another reboot, bootloop.
I dont have this issue since lock screen was just sliding.
Another issue: bluetooth is working, but when wireless speakers are on sync, no sound whatsoever. A common fault on several android 13 installations as i can tell.
Remember that @phhusson is adding exynos updates on TrebleDroid, so we should expect (or beg, cant tell ) that more fixes are on the way?

And BTW if Someone needs it the best Roms/GSI for A8+ are TreeUi(S20 Port) , PixelExperience (11) and FusionX(10,maybe) and Don't try Android 12 /13Gsi as they don't work currently.

AlphaMaster08 said:
And BTW if Someone needs it the best Roms/GSI for A8+ are TreeUi(S20 Port) , PixelExperience (11) and FusionX(10,maybe) and Don't try Android 12 /13Gsi as they don't work currently.
Click to expand...
Click to collapse
Thanks!
This guide most of all was because a couple of users were asking if there's a way to run Android 13 on their A8s. So there's an answer for that now. Almost.