Develop Bugs

Has anyone tried DirtyUnicorns?

Seems that there are DU builds for the HTC 10 (pme). Here: https://download.dirtyunicorns.com/pme/
Has anyone tried them? If yes, what are your impressions? :laugh:

errikosd said:
Seems that there are DU builds for the HTC 10 (pme). Here: https://download.dirtyunicorns.com/pme/
Has anyone tried them? If yes, what are your impressions? :laugh:
Click to expand...
Click to collapse
It is AOSP based compared to LOS (CM) which the majority of the ROMs posted are.
DU is a great ROM. I found that it lacked some important features that I like, but a very solid ROM.

Yes i tried on Sprint but there was no data...even after entering the apn in

errikosd said:
Seems that there are DU builds for the HTC 10 (pme). Here: https://download.dirtyunicorns.com/pme/
Has anyone tried them? If yes, what are your impressions? :laugh:
Click to expand...
Click to collapse
Encryption was not working, even with a full data format prior to flashing.
Any other opinions?

I have been running the weekly and official builds with nebula eas kernel for about 5 weeks or so. I personally feel its the best non-sense based ROM for my usage. It does lack some customisations most others have but makes up for it by being super stable, fast, battery friendly and just works as its supposed to with bull. I use superSU, substratum and A.R.I.S.E audio mod with selinux permissive without dramas.

mrrflagg said:
I have been running the weekly and official builds with nebula eas kernel for about 5 weeks or so. I personally feel its the best non-sense based ROM for my usage. It does lack some customisations most others have but makes up for it by being super stable, fast, battery friendly and just works as its supposed to with bull. I use superSU, substratum and A.R.I.S.E audio mod with selinux permissive without dramas.
Click to expand...
Click to collapse
Does it come with root or Magisk out of the box?
To reverse the question, can I use it as clean Android without root, passing SafetyNet? Thanks!

errikosd said:
Does it come with root or Magisk out of the box?
To reverse the question, can I use it as clean Android without root, passing SafetyNet? Thanks!
Click to expand...
Click to collapse
It comes WITHOUT root. So you can choose your preffered method or no root at all.
I don't know about safetynet as I am not using android pay or anything that relies on it to pass.
Also I have not had any encryption issues as someone earlier replied

mrrflagg said:
I have been running the weekly and official builds with nebula eas kernel for about 5 weeks or so. I personally feel its the best non-sense based ROM for my usage. It does lack some customisations most others have but makes up for it by being super stable, fast, battery friendly and just works as its supposed to with bull. I use superSU, substratum and A.R.I.S.E audio mod with selinux permissive without dramas.
Click to expand...
Click to collapse
What firmware and TWRP Version are you using with it ? With the Nougat firmware and latest TWRP, I get the encryption issue..

Scutariu said:
What firmware and TWRP Version are you using with it ? With the Nougat firmware and latest TWRP, I get the encryption issue..
Click to expand...
Click to collapse
401.4 FW and 3.1.0 TWRP. What kind of encryption issue? I did have once only rebooted into recovery and it asked for the password but I just rebooted in recovery from TWRP and it never happened again.

mrrflagg said:
401.4 FW and 3.1.0 TWRP. What kind of encryption issue? I did have once only rebooted into recovery and it asked for the password but I just rebooted in recovery from TWRP and it never happened again.
Click to expand...
Click to collapse
I've tried several combinations, with older/latest firmware.
Every time, It would ask for the encryption password on bootup.
Even if I haven't set one up.. With data format prior to installing
Anyway, got sick of re-setting apps on my phone, just installed Maximus HD ROM, and that's that ?

Dirty Unicorns
errikosd said:
Seems that there are DU builds for the HTC 10 (pme). Here: https://download.dirtyunicorns.com/pme/
Has anyone tried them? If yes, what are your impressions? :laugh:
Click to expand...
Click to collapse
The 4-8-17 build is Android 7.1.2 and so far it is running really well. I am surprised that there​ is not a thread in the ROM section for DU.

morr22066 said:
The 4-8-17 build is Android 7.1.2 and so far it is running really well. I am surprised that there​ is not a thread in the ROM section for DU.
Click to expand...
Click to collapse
I think it was the DU team's decision to close all and not allow any XDA threads. Someone correct me if I am wrong.
No idea why though.

morr22066 said:
The 4-8-17 build is Android 7.1.2 and so far it is running really well. I am surprised that there​ is not a thread in the ROM section for DU.
Click to expand...
Click to collapse
A quick question.
What variant , firmware and TWRP are you using?
Everytime I try that rom..it encrypts itself with an unknown password, and upon restart I'm unable to access my phone

Encryption
Scutariu said:
A quick question.
What variant , firmware and TWRP are you using?
Everytime I try that rom..it encrypts itself with an unknown password, and upon restart I'm unable to access my phone
Click to expand...
Click to collapse
I have had that happen when switching from a sense based ROM to LOS or AOSP and it's a "pita"... Anything that I want to keep gets moved to my SD card before I reboot to recovery.
I read through several threads and tried several possible solutions so I can't remember exactly which one worked.
I am currently on Verizon, official Nougat with the flashed us unlocked "patch", TWRP 3.1.0-1. If you are on Verizon or Sprint you need to patch the image with a missing image that is found in the us unlocked model (there are threads discussing it where you can find the file).

LOS
Scutariu said:
A quick question.
What variant , firmware and TWRP are you using?
Everytime I try that rom..it encrypts itself with an unknown password, and upon restart I'm unable to access my phone
Click to expand...
Click to collapse
The Lineage is wiki spells things out pretty well.
https://wiki.lineageos.org/devices/pme/install
Here is another thread on twrp issues
https://forum.xda-developers.com/htc-10/how-to/guide-fix-pin-pattern-password-t3538438

morr22066 said:
The Lineage is wiki spells things out pretty well.
https://wiki.lineageos.org/devices/pme/install
Click to expand...
Click to collapse
It was not related to the data partition.
The format user data was done prior and after flashing it.

There is a DU Oreo-based build for the HTC 10: https://download.dirtyunicorns.com/?device=pme
For the time being it is under "RC". Downloading now, will report back!
Edit: ROM is very nice and is flying by. Only downside is that camera app is VERY slow... Also, woofer is not working (as expected).
What I like the most is that it is AOSP, i.e. no LineageOS stuff like AudioFX, etc. Customisation features are nice and the experience is close to Pixel with Stock OpenGapps. If the camera app is fixed, then this would be perfect (I believe it will, since this is the first RC release)!
Further notes: Capacitive buttons backlight is off by default (can't find any standard option to turn on, maybe with a kernel tool?) and notification LED does not work either. Don't mind for the capacitive buttons too much, but the LED is a real problem.

errikosd said:
There is a DU Oreo-based build for the HTC 10: https://download.dirtyunicorns.com/?device=pme
For the time being it is under "RC". Downloading now, will report back!
Edit: ROM is very nice and is flying by. Only downside is that camera app is VERY slow... Also, woofer is not working (as expected).
What I like the most is that it is AOSP, i.e. no LineageOS stuff like AudioFX, etc. Customisation features are nice and the experience is close to Pixel with Stock OpenGapps. If the camera app is fixed, then this would be perfect (I believe it will, since this is the first RC release)!
Further notes: Capacitive buttons backlight is off by default (can't find any standard option to turn on, maybe with a kernel tool?) and notification LED does not work either. Don't mind for the capacitive buttons too much, but the LED is a real problem.
Click to expand...
Click to collapse
Yea I'm having that sane problem with the touch key lights not working n it bothers me a bit. I didn't notice if the led was working or not. Keep me posted if u figure out the the key problem plz.

[ROM][P905][P555 Port] 6.0.1 TouchWiz 20170801

I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
This firmware was developed for the p905. It doesn't apply to the p905v at this time because it's bootloader locked and a custom recovery isn't possible.
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
This port based on firmware for Samsung Galaxy Tab A & S Pen (SM-P555) http://www.gsmarena.com/samsung_galaxy_tab_a_&_s_pen-7443.php
Based on:
libs and bins from original latest SM-G900F (Samsung s5) firmware (G900FXXS1CQD4)
framework from original latest SM-P555 firmware (P555XXS1BQA1)
Instructions
1. Install custom recovery
2. Download the zip - firmware
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware
First boot will be very long (10-12 minutes).
Known Issues
- error on search cell provider
- send sms
Important
After booting up in settings wizard, Be sure uncheck diagnostic data
If you already checked it, Settings - General management - Report diagnostic info - off then reboot
It can help, if you have gsm issues.
Links
5. 20170801: https://drive.google.com/file/d/0B-6nm7Jks0W5eFhmWGdCVjBaaUU/view?usp=sharing
Big thanks @alex22280 and @bonuzzz for help with this update
- sound (update mixer_path.xml) - in some cases sound was missed in audio players
- multi windows now allowed for all apps
- ril (updated telephony-common.jar - it should be more stable)
- applock - you can set password for any app
- youtube in up to 1440p resolution (model was changed to sm-a720)
- added csc stuff (merged csc from n7 port and original p555)
- updated s-pen\snone apps
- updated calculator (with converter) and s-music
4. 20170725: https://drive.google.com/file/d/0B-6nm7Jks0W5QmZVOGxrR3NpWjQ/view?usp=sharing
- ir blaster
- microphone - phone and voip
- gallery crash (thanks @alex22280)
- gears (during update on start system, was shifted down)
p.s. touchwiz settings will be reseted during this update.
3. https://drive.google.com/file/d/0B-6nm7Jks0W5Q1JqcTBkeUY3SUk/view?usp=sharing
- themes
2. https://drive.google.com/file/d/0B-6nm7Jks0W5VjhXall2b1lCdlk/view?usp=sharing
- BT, haptic and root (magisk)
1. https://drive.google.com/file/d/0B-6nm7Jks0W5ejktTGs3UkVQMUE/view?usp=sharing
- initial update
Mods
flash zip with mods right after main firmware:
1. S7 style - new icons for apps: https://drive.google.com/file/d/0B-6nm7Jks0W5WjlWM1Jyb2dxRVk/view?usp=sharing
2. S8 style - new icons for apps, big thanks @jjjhitel for icons pack: https://drive.google.com/file/d/0B-6nm7Jks0W5SFdRZG5mTWlNU0k/view?usp=sharing
Sources
Kernel: https://github.com/Valera1978/android_kernel_samsung_viennalte
Thanks
Thanks to Samsung

very good rom! much faster than n7 port
ps: upload some screenshots for guys

@Valera1978
Bro, you are the best dev ever! And also amazing person!
Thanks for this awesome rom!

Hi, thank you very much for your work.
I'm going to install it and see how it works.
Can I install it with DualBootPatcher?

Amazing work, thanks! Almost all working, just using external keyboard I have some issues with slow BT connectivity. Ah, how to root this? I tried with SuperSU, Cf-autoroot (for p555) and Kingoroot, nothing works :/

Alejuan2005 said:
Hi, thank you very much for your work.
I'm going to install it and see how it works.
Can I install it with DualBootPatcher?
Click to expand...
Click to collapse
DualBootPatcher should work.

ChristianMe said:
Amazing work, thanks! Almost all working, just using external keyboard I have some issues with slow BT connectivity. Ah, how to root this? I tried with SuperSU, Cf-autoroot (for p555) and Kingoroot, nothing works :/
Click to expand...
Click to collapse
BT connectivity done, will be today, but later.
Also will be haptic, flashlight in quick settings and root.

OH, nice!! Work in P905M?

jrbill said:
OH, nice!! Work in P905M?
Click to expand...
Click to collapse
Replying to myself lol
Yes! It works on the SM-P905M. 4G, wifi, bluetooth.
Great rom, congratulations !!!!

Valera, take a look in screen off memo (when we remove the spen with screen off), resolution is wrong (smaller). I'm using daily your rom in my GT-P905M and it's answering fine and very fast. Thanks

VERY GOOD ROM FAST AND STABLE THANK YOU.
I SEEM TO HAVE ONE ISSUE HELIUM BACKUP IS NOT COMPATABLE WITH MAGISK MANAGER I CANNOT GET ROOT privileges.
HELIUM IS ALWAYS ASKING FOR USB CABLE AND PTP MODE.
I CANNOT RESTORE MY BACKUPS .
I SEEM TO HAVE THE SAME ISSUE WITH titanium backup
PREVIOUS ROM [ROM][P905][N7 Port] HELIUM WORKED PERFECTLY
ANY HELP WOULD BE APPRECIATED THANKS

theogalaxy said:
VERY GOOD ROM FAST AND STABLE THANK YOU.
I SEEM TO HAVE ONE ISSUE HELIUM BACKUP IS NOT COMPATABLE WITH MAGISK MANAGER I CANNOT GET ROOT privileges.
HELIUM IS ALWAYS ASKING FOR USB CABLE AND PTP MODE.
I CANNOT RESTORE MY BACKUPS .
I SEEM TO HAVE THE SAME ISSUE WITH titanium backup
PREVIOUS ROM [ROM][P905][N7 Port] HELIUM WORKED PERFECTLY
ANY HELP WOULD BE APPRECIATED THANKS
Click to expand...
Click to collapse
Μην γραφεις με μεγαλα γραμματα. Titanium backup work fine

alex22280 said:
Μην γραφεις με μεγαλα γραμματα. Titanium backup work fine
Click to expand...
Click to collapse
my main problem as i quoted is helium backup .
titanium backup i rarely use but i could not get it root priviliges the first time i installed. now i am getting app not installed.
both apps worked perfectly with [ROM][P905][N7 Port] 6.0.1 .
problem is magisk

thanks for rom, work well, but I got issues with smart view or screen mirroring, it connects but then ended right away. is there anyway to fix this? thanks

A big thank you to Valera1978 after months and months of overheating , blue screens , and rebooting.
Finally no more issues with this rom for the the above mentioned problems thank you.
how ever i still cannot get helium root priviliges from mgaisk

Screen mirroring
Does anyone know if screen mirroring works on this rom?
Thank you in advance.

Great rom very smooth and fast! You are awesome for doing this!
---------- Post added at 03:08 AM ---------- Previous post was at 03:06 AM ----------
theogalaxy said:
A big thank you to Valera1978 after months and months of overheating , blue screens , and rebooting.
Finally no more issues with this rom for the the above mentioned problems thank you.
how ever i still cannot get helium root priviliges from mgaisk
Click to expand...
Click to collapse
Helium does not even require root priveledges? (Nevermind wrong helium saw u said helium blue I was thinking of helium back up by clockwork mod)

Loakidog said:
Great rom very smooth and fast! You are awesome for doing this!
---------- Post added at 03:08 AM ---------- Previous post was at 03:06 AM ----------
Helium does not even require root priveledges? (Nevermind wrong helium saw u said helium blue I was thinking of helium back up by clockwork mod)
Click to expand...
Click to collapse
thanks for your reply and i am sorry if i am being a little confused. i am talking about
Helium - App Sync and Backup.
with superuser it asked for root priviliges and i used it to restore and backup without a pc.
now i need a pc the usb cable connected and ptp mode . i think is someting to do with MAGISK.
thanks

@Valera1978 you are so awesome and I am so glad you are developing these roms this seems to be the smoothest yet! I have maybe a dumb question though is flashlight already done and I messed up or are you waiting to finish the camera video and Mic or something like that and including it with that update? Also I hate to even ask bc I have been trying to learn to port roms and I realize it's a lot of work so much so I may never get it right but I was wondering if you could include a few features or point me in the direction of a tutorial to include them myself? Magnify and gif maker in air command would be great but I would really most like the ability to include more apps in the air command menu like you did with the n7 port. I downloaded magnify and the screen record for gif maker but no luck doesn't even show up but s translate did. Also if anyone would like it there is an app available that is nearly identical to the edge screen in the play store if you miss that feature from the n7 port. There is a free version and a pro version. It works really well. Again Valera thank you so much for this amazing rom and I really like the inclusion of magisk and the ability to use systemless root and systemless xposed. I can now hide my custom rom and root privledges from the apps i use that check for them! Again thank you so much!

How to install kernel?
Anyone?:
love2dance said:
Does anyone know if screen mirroring works on this rom?
Thank you in advance.
Click to expand...
Click to collapse
I'm going to try this rom.
Could anyonw tell me how to install the kernel? I downloaded a zip file. Should I install the zip in the same manner as the rom?
Is the kernel necessary or could I skip it?
Thank you in advance.

[ROM][2017-10-22][UNOFFICIAL] XenonHD ROM for Mix 2 (Chiron) [7.1.2]

XenonHD ROM for Xiaomi Mi Mix 2
A Team Horizon ROM
Based on AOSP r36 7.1.2
This ROM has all the features XenonHD has to offer.
All hardware functions including:
NFC
Bluetooth Audio
Fingerprint Scanner
Doze & Wake-up Gestures (dtw works after the first reboot)
And...many more things.
Magisk is no longer built in, so you'll need to flash it when first installing, and after every dirty flash.
VoLTE doesn't work (at least on T-Mobile). I believe most of the pieces are in place, but there may be something in the firmware that's preventing it? If I could figure out how to tap into the stock cust files, I might be able to figure out how to get it working.
Proximity Sensor is working:
Notification Light:
I have slowed down the notification light so it isn't all amped up. To make it completely usable, go to:
Fixed default notification blinks for built-in apps so they are slowed down without needing to go to settings.
For use-installed apps, add them to custom notification list in settings > notifications > gear icon > notification light > + in upper right corner > select app. Apps added to that list will have slow notification blinks.
I simply cannot find a way to make user-installed app notifications behave the same as built-in apps. Grrr!!
I have also made the light sensor wait longer before dimming the screen. This helps with left-handed activities blocking the light sensor and almost immediately dimming the screen.
Reduced time to go back from dim to bright. Screen will dim after 5 seconds, returns to bright after 2 seconds.
I've remove configpanel & pocketmode...they did little to nothing, and may have caused more battery drain than I care for.
Required prior to installing:
Unlock Bootloader
Install custom recovery: https://www.androidfilehost.com/?fid=962021903579490303
HUGE thanks to IceMan for bringing this to Mix 2!
A quirk with this TWRP: This one looks for backups in TWRP/BACKUPS/MIX_2 folder. Normally, the MIX_2 folder is named after serial number of your device.
So, you existing backups won't be found until you rename the folder in BACKUPS to MIX_2.
Installation Instructions:
Dirty flash is now available with the above TWRP and 10-26-2017 rom.
Download the most recent build: https://www.androidfilehost.com/?fid=673791459329071426
Download Gapps (I use Open Gapps Mini) --> http://opengapps.org/
All versions from 10-24-2017 are now encryptable.
From TWRP Recovery:
IF COMING FROM MIUI-BASED ROM: FULL WIPE AND FORMAT DATA!!
If you encounter ERROR 7, during XenonHD install, install Global MIUI ROM, then do full wipe and data format again, then install XenonHD rom.
If coming from AOSP-based ROM:
- Full wipe (Cache, Davlik/ART Cache, System & Data)
- Flash ROM zip
- Flash Gapps zip
Huge thanks to Mokee for bringing this device up and making a great place to start.
Also a very HUGE thanks to @Arasthel for his work on proximity sensor and figuring out the bluetooth reboot stuff and other hints, suggestions and incalculable work.
I'd also like to thank all of you folks here for trying this ROM and providing constructive feedback.
In addition, I appreciate your patience when issues come up that need to be fixed. I am not a developer, and I have a full time job and a wife that takes precedence most of the time
Sources:
Vendor:
https://github.com/hondajohn88/android_vendor_xiaomi_msm8998-common
https://github.com/hondajohn88/android_vendor_xiaomi_chiron/tree/xenonhd
Kernel:
https://github.com/hondajohn88/android_kernel_xiaomi_msm8998/tree/xenonhd
Device:
https://github.com/hondajohn88/android_device_xiaomi_chiron/tree/xenonhd
https://github.com/hondajohn88/android_device_xiaomi_msm8998-common/tree/xenonhd

reserved

reserved 2

Does safety net pass with or without magisk?

subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
With magisk its working
Gesendet von meinem MI Mix 2 mit Tapatalk

THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs

Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)

KOLIOSIS said:
THX for the ROM @hondajohn88 ,very much appreciated. :good:
Is this 1st release identical to the beta?
Just curious,as I tried to dirty flash over the beta & got the same errors as if coming from another ROM (wouldn't flash).
Is a full wipe (less formatting data) necessary if updating ?
I don't mind setting up from new again,even if just updating from the beta build.
However,wondering if incremental updates are going to be an option on future builds.
THX.
Sent from my MI Mix 2 using XDA Labs
Click to expand...
Click to collapse
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.

subashchandran said:
Bluetooth seems to be working fine for audio/calls. Need to try video/youtube audio output on car (will do it on the drive back home)
ROM is slick, its been good so far (2 hours since i have set everything up)
Click to expand...
Click to collapse
Glad everything is working for you so far. Bluetooth audio in car should work (it does on mine), but I found the volume on the car set to zero so needed to turn that up. That was a brief "oh crap" moment that I thought it wasn't working lol

subashchandran said:
Does safety net pass with or without magisk?
Click to expand...
Click to collapse
I think it fails without it, but magisk is built in, so if have to remove it to find out for sure.

hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
IT'S ALL GOOD @hondajohn88 . :good:
This ROM is daily-driver material,every update from here on out is a bonus & very much appreciated. :good:

hondajohn88 said:
Oh yeah...I need to add that to the OP, for some reason, dirty flash won't work. There's a couple weird things with this build, one is I can't make a dirty build or it breaks Wi-Fi, and can't dirty flash. I don't know the reasons, but if I figure it out, I'll be sure to let everyone here know. It's an extreme pain in the ass.
Click to expand...
Click to collapse
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.

Arasthel said:
It seems that we both have faced this issue. I just got A2DP working yesterday on Resurrection Remix by using sagit as base - without msm-8998 common and all that -, imagine my surprise when I saw you also did .
Anyway, I think the WiFi bug may be related to something going wrong in the build. When you build the ROM, kernel sources are used and you can see that the wlan.ko module is built. The problem is, wlan.ko is also a binary blob found in vendor. I believe that on the 2nd build, if dirty, one of these modules overwrites the other - which worked. Maybe you can test this idea, I will be doing it too on the next days.
Click to expand...
Click to collapse
That's cool you got the Bluetooth working on RR, knocking little things out one by one ?
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ??
By the way, does android auto work on your rr?

Everything except proximity sensor works and works as good as stock. I have installed custom font, black swift substratum OMS theme without any hiccups. The rom is buttery smooth and I've been getting a better battery drain trend on this compared to resurrection/mokee. I have naptime doze installed to see if i can ooze out more battery goodness to the levels of epic Rom(miui 9)
Overall this is super encouraging to see a daily driver rom this early for mi mix 2.
There is one edge case which might be a bug, when connected on car Bluetooth and watching something on YouTube.. And then you get a call, i pressed answer on the car knobs/buttons.. I couldn't hear the person talking.. Car was displaying "audio disabled message ”. But talking/call and video/music in isolation works just fine.

Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel

slyyke said:
Android auto works for me. I'm on RR now. Might come to this if we can get Android auto working. How did you guys fix your Bluetooth audio on RR (we can move this to the RR thread if you prefer) @Arasthel
Click to expand...
Click to collapse
Thanks for the info about android auto on RR. I'll take a look at their repo and see if I messed up a USB setting somehow.
As far as I'm concerned, other ROMs can be discussed here.
Open source should be crowd sourced for maximum problem resolution.
RR probably (?) Did the same as me... Mokee made a commit in qcom/audio that did the trick.

hondajohn88 said:
That's cool you got the Bluetooth working on RR, knocking little things out one by one
Thanks for the idea on the Wi-Fi, I'll look into that this evening. Maybe there's a file I can delete before dirtybuilding. That would make testing things a lot faster! ?
By the way, does android auto work on your rr?
Click to expand...
Click to collapse
Hi... Thank you again for the wlan.ko tip. I deleted all instances of that in my out folder, dirty built and it's all good. Sped up my test time considerably! Woohoo! :good:

Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!

stu5797 said:
Thanks op for adding this to to the mix. Much appreciated. I am not sure if I can leave Resurrection due to all the customization options. Does this room offer as many customization options? Thanks so much!
Click to expand...
Click to collapse
I haven't used rr for this phone, but I think at this point rr probably has more options. This one has quite a few, and as son as I get most of this ROM straightened out, I'll try adding more options.
I'll add some screen shots of the settings to help people decide.
Thanks ?

Great work by a great Dev,
Thanks for putting in the work, smoothhhh rom~

[REQUEST][ROM][A520f/A720f][OFFICIAL] Resurrection Remix 6.0

please release [ROM][A720f/A520f] [OFFICIAL] Resurrection Remix 6.0
Everyone like this please say!

I'm trying to build one for a5, but may be unsuccessful.
Wish me luck!

Plz post new RR 6 thread for A520F.....now running 5.8.5

@matkali https://www.androidfilehost.com/?fid=1322778262904014011
Here you go.

Thanks
sheepkill15 said:
@matkali https://www.androidfilehost.com/?fid=1322778262904014011
Here you go.
Click to expand...
Click to collapse
thanks for it
if you can port this for a720f

@sheepkill15 I have a question mate. Is there anything specific regarding the installaton process of your ROM? I installed your RR-O-v6.1.0-20180907 and 8.1 GApps mini but I've been sitting on a bootanimation for over 20 minutes now. Thanks for your effort and sharing the ROM with us.

SoloMid Hazard said:
@sheepkill15 I have a question mate. Is there anything specific regarding the installaton process of your ROM? I installed your RR-O-v6.1.0-20180907 and 8.1 GApps mini but I've been sitting on a bootanimation for over 20 minutes now. Thanks for your effort and sharing the ROM with us.
Click to expand...
Click to collapse
There's nothing special to be done, but yes, sometimes it's stuck in bootloop. What I usually do is:
Hard reset, wipe everything except microsd, delete the zip from sd card, copy it again and install again.
Idk why it needs sometimes to be flashed again, but that way it will boot for sure. A normal first boot with this rom should be around 7 minutes

sheepkill15 said:
There's nothing special to be done, but yes, sometimes it's stuck in bootloop. What I usually do is:
Hard reset, wipe everything except microsd, delete the zip from sd card, copy it again and install again.
Idk why it needs sometimes to be flashed again, but that way it will boot for sure. A normal first boot with this rom should be around 7 minutes
Click to expand...
Click to collapse
I got it to work, and it is great. I just have one more question. Do you have any recommendations on which gcam version to use? Thank you once again.

SoloMid Hazard said:
I got it to work, and it is great. I just have one more question. Do you have any recommendations on which gcam version to use? Thank you once again.
Click to expand...
Click to collapse
I don't know which version is good, I don't use it

watched reddish purple balls for about 20 minutes... did the 2nd round and after maybe 90 seconds I am checking it out. Thanks!

+1 ThX

while flashing on SM-A520S 90% flashing bar showing then this error come
Eror 1001 cant mount system
sorry for bad english
try many times also format every thing but still got this error

question
is there any bugs in this rom ? is it stable and support the Dual sim configuration means both sim card can be detected ? cuz am using HadesRom v4.5 it's cool! but i get fed up from the TOUCHWIZ and i want the original google roms give my A5 2017 the full power of CPU and GPU ! more faster and more powerful but with the original looks heavy sometimes after maybe a month of using !
thnx if you reply bro

Chiha ALi said:
is there any bugs in this rom ? is it stable and support the Dual sim configuration means both sim card can be detected ? cuz am using HadesRom v4.5 it's cool! but i get fed up from the TOUCHWIZ and i want the original google roms give my A5 2017 the full power of CPU and GPU ! more faster and more powerful but with the original looks heavy sometimes after maybe a month of using !
thnx if you reply bro
Click to expand...
Click to collapse
In the current build, the biggest problem is that the buttons dont light up, but I fixed that in the meantime, just haven't uploaded it yet. The other noticeable issue is that the battery life is not perfect. I'm working on it too. The radio isn't working yet, but you don't use it, there's nothing more.
I don't know about dual sim, since I have the normal one.

Does anybody else face a problem of a laggy front camera using apps like snapchat/messenger/instagram?

Thank you very much for this rom bro
problems are :
The Rom :
- Didn't detect my saved contacts on both sim cards.
- Didn't have the same quality of image but it's not bad.
- The calculator app still more than 1 min to open ( something weird)!
- Battery usage looks perfect !
- The configurations in settings gives a lot of helpful things such as the customization of the notification panel and the power menu !
.
so what i did now is that i rooted with magisk and i installed ( Root explorer R ) pro version and installed ( System apps uninstall ).
i deleted ( Calculator,Camera,browser,messaging,music player,gallery.....etc) then i installed an Alternative for them. so now i have my customized RR V6.2.0
it's awesome with root. But for who installed this rom you can go to settings and find the display PPI ( you will find it about 400ppi ) i changed it up to 424ppi( the original A5 2017 ppi ) and now works perfectly .

Feedback RR-O-v6.2.0-20180925-a5y17lte-Unofficial
sheepkill15 said:
I don't know which version is good, I don't use it
Click to expand...
Click to collapse
Friend I've been with your rom for a few days and it's the BEST ROM OF EVERYTHING! I say this in a matter of customization and having a purest experience that samsung ...
I have an A520F (two-chip model) and both are OK.
The problem is that it has some really annoying bugs as a problem to play media (especially songs that get squeaked and at first I was worried if my headphones had damaged), also has bugs in the camera that seem to limit their quality a lot, bugs in the interface in general that make the device reboot out of nowhere (it happened to me 1 or 2 times during the time I am with the rom on the device [4 days]), bugs on the physical buttons as previously said, among others ... These were the most important bugs I had with rom.
I have some suggestions for interesting implementations to make in the rom like stereo audio (it has this function in Hades), just leave the pixel launcher more notifications optimization on the always on display and one good thing I believe developers should do is provide a form of install a separate galaxy s9 camera package that is present in rom Hades for all roms.
You are doing a good job and good luck for more projects in the future. I'll probably record a YouTube video about your future rom and give you the credits.

Zenfone 5 ZE620KL Project Treble GSI Test

After days of deciding..
Yes!! i have risked my device warranty for the sake of fun and excitement. HAHA LOL
For those who asked if we can flash Treble GSI (Generic System Image) on our device. The answer is Yes, FOR ME AT LEAST!
No complicated steps or whatsoever.
I just followed the steps from this link and downloaded the GSI of my choice. CREDITS TO ALL THE DEVELOPERS WHO WORKED FOR THIS PROJECT.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
TRY THIS AT YOUR OWN RISK! I will not be held accountable to whatever happens to your device. This post is just to prove that indeed our device is treble enabled.
Some important things to note:
- You have backup of your data
- You have a working ADB
- There might be functionalities that is not working at the moment (Read the changelogs of your GSI choice before downloading)
- The notch looks bad on these builds (Android P might be able to fix this when it arrives)
- Your device should be in stock ROM (no heavy modifications such as xposed , magisk etc..) ROOT Not needed
- You should put your device on factory reset before trying this.
I have attached some screenshots of my test.
LINK TO Treble-Enabled Device Dev
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
THANK ME LATER! PEACE OUT!

good job!

Yes great job hows the camera working for you

grodri19721 said:
Yes great job hows the camera working for you
Click to expand...
Click to collapse
Lineage includes a very basic camera. just photo and video no portrait mode etc..
Lineage also has no gapps, i dont have twrp to flash gapps still figuring out how to install it.
I switched to the PixelExperience rom its great and with gapps included.

illustrasszo27 said:
Lineage includes a very basic camera. just photo and video no portrait mode etc..
Lineage also has no gapps, i dont have twrp to flash gapps still figuring out how to install it.
I switched to the PixelExperience rom its great and with gapps included.
Click to expand...
Click to collapse
android p preview 2 developer?

Everything functional?, no bugs?

el canario said:
android p preview 2 developer?
Click to expand...
Click to collapse
No. Its Android 8.1
There is no gsi for Android P yet.

DocRambone said:
Everything functional?, no bugs?
Click to expand...
Click to collapse
The only bug i have notice so far in PixelExperience is sometimes mobile data does not turned on when you toggle it in the quick tiles. you have to restart your phone then it will work after that.

illustrasszo27 said:
The only bug i have notice so far in PixelExperience is sometimes mobile data does not turned on when you toggle it in the quick tiles. you have to restart your phone then it will work after that.
Click to expand...
Click to collapse
You have the Z version with 845-chipset?

DocRambone said:
You have the Z version with 845-chipset?
Click to expand...
Click to collapse
No this is the lower version. with snapdragon 636

im still waiting on android P rom XD

Is the status bar at the top still messed up on the pixel experience ROM?

hands0m3 said:
Is the status bar at the top still messed up on the pixel experience ROM?
Click to expand...
Click to collapse
Yes. same as with lineage. for me its tolerable since no information is being shown at that part of the status bar.

Do you think changing the dpi would help with that

hands0m3 said:
Do you think changing the dpi would help with that
Click to expand...
Click to collapse
I'm not sure bro. One thing i tried is changing the display size in settings. It looks better but everything looks so big. so i reverted to the default one.

Sir could you possibly upload the stock recovery.img of our device.? im stuck on TWRP and i cant flash regular OTA update from there

jrd1990 said:
Sir could you possibly upload the stock recovery.img of our device.? im stuck on TWRP and i cant flash regular OTA update from there
Click to expand...
Click to collapse
What ROM are you using right now? i think you can extract it from the image of that ROM. sorry if this not as helpful.

he is on Stock Rom and he would like one guy put the stock recovery.img here

Excellent job. Thank you. I understand the camera is basic, but how is image quality? Looking forward to Google Camera port tests. And perhaps the ZE620KL fully ported so can make use of the landscape camera. Not a huge deal, but would be nice, no?

As visible on screenshot, Asus Camera is properly visible in the launcher (because of being put to vendor by Asus), but does it run well?