[ROM][BETA/Unofficial] Resurrection Remix 8.6.5 [Avicii / OnePlus NORD] - OnePlus Nord ROMs, Kernels, Recoveries, & Other De

[ROM][BETA/Unofficial] Resurrection Remix 8.6.5 [Avicii / OnePlus NORD] - OnePlus Nord ROMs, Kernels, Recoveries, & Other De

* Your warranty is now.. not void?
* I am not responsible if your phone turns out into a high-tampered mutant or a brick to play lego with.
* Do some research if you don't have any experience in flashing ROMs as you will be needing it,apparently.
* You are choosing to flash my build yourself, I have not compelled you to flash it.
* If you ever say I am responsible for anything happening to your phone, I will just sit back and rejoice the new season of Attack on Titans.
Click to expand...
Click to collapse
I've been building and running RR on my Nord for quite some time now and so far I've not had any major issues, even went on vacation running RR with no hiccups, so thought I'd share it here too.
This is unofficial and will stay unofficial. I have no plans of being an official maintainer. If we do get an official maintainer I will be locking this thread. Until then I hope y'all enjoy the plethora of features RR has to offer.
What's working:
-Boots
-RIL (Calls, SMS, Data)
-VoLIT
-Wi-Fi
-Bluetooth
-Camera
-Camcorder
-Video Playback
-Audio
-Sensors
-Flash
-GPS
-Alert Slider
Partially working
- Fingerprint-on-display:
Unlocking the phone works, very few apps requiring fingerprint authentication work too (Bitwarden)
On most apps (GPay, PhonePe, PayTM, Authy) we see the fingerprint prompt but the high brightness "pressed" state animation does not appear. You'll need to use your pattern here OR setup face unlock if you think Google does not collect your face data for their own DLNNs.
I recommend you use the "Cyan (Shadow)" Pressed state icon in RR settings.
I also suggest to use the solid cyan fp icon & full brightness in RR settings so you don't have to rely on the pressed state animation.
Not Working / Untested:
-VoWiFi (Cannot test)
Pre-requisites:
-Latest OOS installed
Installation Instructions
I hope you know what you are doing before flashing this ROM. I didn't and I screwed up multiple times trying to figure out how to flash and ended up using the unbricking guide 96911 times only to find out how dumb I was (am?).
BACKUP BACKUP BACKUP!!
Spoiler: This may not work on the new build
Bash:
# Reboot to bootloader and run the following
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
# Reboot to fastbootd
fastboot reboot fastboot
fastboot erase scratch # Just a failsafe, any errors can be ignored
fastboot flash system system.img
fastboot flash product product.img
fastboot flash vendor vendor.img
fastboot -w # Wipes userdata
fastboot reboot
To update, just skip the fastboot -w step. YMMV
Use crDroid/LineageOS recovery and flash the ROM zip.
The ROM comes with GApps included.
Download Link: https://androidfilehost.com/?fid=17248734326145684745
Credits: @CryllicBuster273 @firebird11 for the bring-up and device trees of avicii
XDAevDB Information
OnePlus Nord: Resurrection Remix Unofficial for the OnePlus Nord
ROM OS Version: Android 10
Kernel: Source
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta

Reserved

new custom rom

Awesome to see new ROMs coming, I see that you said you don't plan to be an official maintainer, I'm just wondering why? Is that too much work or something else?

Andrica said:
Awesome to see new ROMs coming, I see that you said you don't plan to be an official maintainer, I'm just wondering why? Is that too much work or something else?
Click to expand...
Click to collapse
It's mainly because I have very limited free time to compile a new build and provide updates. Plus compiling Android now takes a significantly lot more time and compute resources than during Nougat days which can get frustrating. I prefer not to ruin the experience of an Official RR thread.

Does 5G and 5G DSS work with this Custom ROM? Thanks

Привет. Хочу установить твою прошивку. У вас самый последний стабильный выпуск?

Hey. I want to install your firmware. Do you have the most recent stable release?

I installed your firmware. Thank you. I liked it, it is smooth. 90Hz is for sure. I will use it. It would be great if you could solve the problem with google pay! Please, if you make an update, please post it, I'll put it to myself.

pedroxtucasa said:
Does 5G and 5G DSS work with this Custom ROM? Thanks
Click to expand...
Click to collapse
I don't have 5G in my country so I cannot test it
redangel.voivod said:
I installed your firmware. Thank you. I liked it, it is smooth. 90Hz is for sure. I will use it. It would be great if you could solve the problem with google pay! Please, if you make an update, please post it, I'll put it to myself.
Click to expand...
Click to collapse
Whats the issue with google pay? Is it Safetynet related? In that case there is not much that can be done in the ROM, rather you'll have to mess around with magisk , magiskprops etc.
I Do want to publish an update based on the official LineageOS sources however I just don't have the time due to work commitments. I'll see if I can publish an update on some weekends

DroidFreak32 said:
I don't have 5G in my country so I cannot test it
Whats the issue with google pay? Is it Safetynet related? In that case there is not much that can be done in the ROM, rather you'll have to mess around with magisk , magiskprops etc.
I Do want to publish an update based on the official LineageOS sources however I just don't have the time due to work commitments. I'll see if I can publish an update on some weekends
Click to expand...
Click to collapse
there is still a problem. File transfer via NSF from one smartphone to another does not work. It does not connect and crashes into recovery.

Is this rom stable enough for daily use?
Does face unlock work on this rom?

[QUOTE = "mongaidsd, post: 84373711, member: 11397017"]
Достаточно ли стабилен этот ром для повседневного использования?
Работает ли разблокировка по лицу на этом диске?
[/ QUOTE]
Да, стабильно. Я на нем больше недели. Разблокировка по лицу работает хорошо. Палец не работает. А нфс нужно было создать с помощью магии. В остальном мне все нравится. Я остаюсь на нем.

Managed to Flash the Zip directly through Pixel Experience Recovery. Also no problems with Evira Kernel which is a bonus. Just need some updates for the ROM and I'd be completely set.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

DroidFreak32 said:
I've been building and running RR on my Nord for quite some time now and so far I've not had any major issues, even went on vacation running RR with no hiccups, so thought I'd share it here too.
This is unofficial and will stay unofficial. I have no plans of being an official maintainer. If we do get an official maintainer I will be locking this thread. Until then I hope y'all enjoy the plethora of features RR has to offer.
What's working:
-Boots
-RIL (Calls, SMS, Data)
-VoLIT
-Wi-Fi
-Bluetooth
-Camera
-Camcorder
-Video Playback
-Audio
-Sensors
-Flash
-GPS
-Alert Slider
Partially working
- Fingerprint-on-display:
Unlocking the phone works, very few apps requiring fingerprint authentication work too (Bitwarden)
On most apps (GPay, PhonePe, PayTM, Authy) we see the fingerprint prompt but the high brightness "pressed" state animation does not appear. You'll need to use your pattern here OR setup face unlock if you think Google does not collect your face data for their own DLNNs.
I recommend you use the "Cyan (Shadow)" Pressed state icon in RR settings.
Not Working / Untested:
-VoWiFi (Cannot test)
Pre-requisites:
-Latest OOS installed
Installation Instructions
I hope you know what you are doing before flashing this ROM. I didn't and I screwed up multiple times trying to figure out how to flash and ended up using the unbricking guide 96911 times only to find out how dumb I was (am?).
Bash:
BACKUP BACKUP BACKUP!!
# Reboot to bootloader and run the following
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
# Reboot to fastbootd
fastboot reboot fastboot
fastboot erase scratch # Just a failsafe, any errors can be ignored
fastboot flash system system.img
fastboot flash product product.img
fastboot -w # Wipes userdata
fastboot reboot
You can even try to use crDroid/LineageOS recovery and flash the ROM zip. To update, just skip the fastboot -w step. YMMV
The ROM comes with GApps included.
Download Link: https://androidfilehost.com/?fid=17248734326145684745
Credits: @CryllicBuster273 @firebird11 for the bring-up and device trees of avicii
XDAevDB Information
OnePlus Nord: Resurrection Remix Unofficial for the OnePlus Nord
ROM OS Version: Android 10
Kernel: Source
ROM Kernel: Linux 4.x
Based On: LineageOS
Version Information
Status: Beta
Click to expand...
Click to collapse

I have an update released here:
https://github.com/DroidFreak32/OTA/releases/download/rr-q/RROS-Q-8.6.9-20210524-avicii-Unofficial.zip
You need to clean flash this upgrade. There are a lot of changes in the LineageOS Device tree for this phone since the last one I released here.
You can use TWRP to wipe data without wiping internal storage.
There are still a few known bugs.
1) FIngerprint requires the phone to be in full brightness for it to register. Unable to get HBM working. No workarounds found yet
2) In some apps the fingerprint "pressed-state" glow does not appear. As a workaround, go to RR Settings > Interface > Fingerprint Settings and use the FOD icon that looks like a Cyan-colored circle.
3) NFC is broken on source built kernel. Whereas prebuilt OOS kernel breaks dt2w gestures. NFC is less important to me so I haven't used a prebuilt OOS kernel.
mongaidsd said:
Is this rom stable enough for daily use?
Does face unlock work on this rom?
Click to expand...
Click to collapse
I would still take a complete backup before running any ROM and testing for a couple of days
And yes face unlock works
Sjuundla said:
Managed to Flash the Zip directly through Pixel Experience Recovery. Also no problems with Evira Kernel which is a bonus. Just need some updates for the ROM and I'd be completely set.
Click to expand...
Click to collapse
Please clean flash the update and let me know if any major bugs exist.
azarian k said:
hi been a big fan of RR roms , was hoping to try out this one too , just thought if it also came in a "with out Gapps" version Thanks
Click to expand...
Click to collapse
I have uploaded 1 here but I have not tested it yet. Unfortunately, I haven't got the time to test due to work stuff which requires me to have Gapps.
https://github.com/DroidFreak32/OTA/releases/download/rr-q/RROS-Q-8.6.9-20210524-avicii-NOGAPPS.zip

DroidFreak32 said:
I have an update released here:
https://github.com/DroidFreak32/OTA/releases/download/rr-q/RROS-Q-8.6.9-20210524-avicii-Unofficial.zip
You need to clean flash this upgrade. There are a lot of changes in the LineageOS Device tree for this phone since the last one I released here.
You can use TWRP to wipe data without wiping internal storage.
There are still a few known bugs.
1) FIngerprint requires the phone to be in full brightness for it to register. Unable to get HBM working. No workarounds found yet
2) In some apps the fingerprint "pressed-state" glow does not appear. As a workaround, go to RR Settings > Interface > Fingerprint Settings and use the FOD icon that looks like a Cyan-colored circle.
3) NFC is broken on source built kernel. Whereas prebuilt OOS kernel breaks dt2w gestures. NFC is less important to me so I haven't used a prebuilt OOS kernel.
I would still take a complete backup before running any ROM and testing for a couple of days
And yes face unlock works
Please clean flash the update and let me know if any major bugs exist.
I have uploaded 1 here but I have not tested it yet. Unfortunately, I haven't got the time to test due to work stuff which requires me to have Gapps.
https://github.com/DroidFreak32/OTA/releases/download/rr-q/RROS-Q-8.6.9-20210524-avicii-NOGAPPS.zip
Click to expand...
Click to collapse
Is the ROM zip flashable via TWRP or I'll have to sideload it with a different recovery?

Broo is the fp working on 8.6.9 latest build? What other bugs are there? Did u build another update for RR?

Installation process??
Help me how can I install this rom can I flash this directly with TWRP/orangefox?
Or with pixel experience recovery through ADB sideload method?

Related

[ROM][13.0][Daredevil] LineageOS 20.0 [UNOFFICIAL]

Note - please take your data backup and do clean flash as per the instructions linked in the main thread. On top of it, my builds will boot on any stock firmware as base. So there is no special recommendation towards which stock rom you need to be on.
Changelog - Sun Jan 22 19:01:23 UTC 2023
============================
• Initial Android 13 build
• Based on android-13.0.0_r20
• Improved system stability
• User interface enhancements
• Google security patch 2023-01
• Selinux enforced
• Vendor built from Source
• Imported CTS profile patches
• Safety net pass by default & no need zygisk
• Updated build fingerprint from Pixel 7 Pro (cheetah)
Reminder - for reporting bugs please mention the issue and attach the logcat.
Thank you!

Awesome..!

Any chance it would run on Nokia 8.1 after unlocking/rooting with Hikari files ?
I'm mean ... someday / when updates are over .

Changelog Sat Apr 3 08:41:31 UTC 2020
===================================
1. Initial stable build
2. March security patch
3. Comes with stock kernel
4. Linux version 4.4.194
5. Vendor image from 2250
6. System blobs from 2250
7. Ota support available
Note- Installation process changed so please go ahead and follow the instructions as I mentioned in installation section

I tested now and I found Google Services - are GApps included? I installed lineageos in this build to AVOID this. Or did I make something wrong?

overclockA said:
I tested now and I found Google Services - are GApps included? I installed lineageos in this build to AVOID this. Or did I make something wrong?
Click to expand...
Click to collapse
Thanks, saved me some time. Defeats the entire purpose for me.

xe500linux said:
Thanks, saved me some time. Defeats the entire purpose for me.
Click to expand...
Click to collapse
I wrote to Raghu varma for the same question.
Technically it seems to not be that simple - if lineage 17.1 has been compiled without gapps and the build process was done by using private keys, flashing gapps would brick the device or the lineageos installation.
So Raghu varma compiled the version with gapps included to avoid this.
So I took his scripts from github and I built lineageos 17.1 on my own (with private keys and without gapps as I don't think about flashing them afterwards) - this worked fine.
Now I couldn't find his scripts for Daredevil on his github profile anymore - maybe they will come back for the 7.2 build process.

overclockA said:
I wrote to Raghu varma for the same question.
Technically it seems to not be that simple - if lineage 17.1 has been compiled without gapps and the build process was done by using private keys, flashing gapps would brick the device or the lineageos installation.
So Raghu varma compiled the version with gapps included to avoid this.
So I took his scripts from github and I built lineageos 17.1 on my own (with private keys and without gapps as I don't think about flashing them afterwards) - this worked fine.
Now I couldn't find his scripts for Daredevil on his github profile anymore - maybe they will come back for the 7.2 build process.
Click to expand...
Click to collapse
Ah I see. Any chance you still have a copy of your non-g build?

xe500linux said:
Ah I see. Any chance you still have a copy of your non-g build?
Click to expand...
Click to collapse
This should be OK. I'll upload a copy and send a link.
Be aware that the security patch level is dated on march 2020 and doesn't include the latest Google security patches from june.

overclockA said:
This should be OK. I'll upload a copy and send a link.
Be aware that the security patch level is dated on march 2020 and doesn't include the latest Google security patches from june.
Click to expand...
Click to collapse
Much appreciated!!

i posted already in the twrp thread of my problem "touch not working with twrp", that's still persisting.
so i got another idea. i used adb commands to control twrp. like you know, adb shell twrp sideload and then do the adb sideload commands for installing lineageos 17.1.
what did i do so far is:
*flash twrp 3.4.0
*boot up to twrp 3.4.0
*use adb shell twrp remountrw
*use adb to sideload lineageos 17.1 zipfile with commands (adb shell twrp sideload and then adb sideload lineageos.zip) - but the progress bar only goes to 47% and say like it would have "finished" - i dont believe in it
*use adb to sideload vendor zipfile zipfile with commands (adb shell twrp sideload and then adb sideload vendor.zip) - that one works normally
*changed slot from B (i was on before) to A on fastboot and flashed the vbmeta to current slot (A)
*reboot without wiping system partition and installing lineageos only brings up normal stock rom
*even wiped system partition one time (or should i say system_root?) - and installed lineageOS via adb sideload. but nothing was in the system_root folder as i mounted it back again
*wiping system partition and reboot only brings up android one loading screen endlessly
so basically, the installer says it has installed the rom, but in reality it didnt seem to touch the system partition at all. am i doing something wrong or may it be that because i dont have touch access i miss to move some unlock slider which is not implemented via adb shell twrp? i think something along these lines might be the case but.. i was able to adb shell twrp wipe system. so basically it should not be a big deal to write to system partition or system_root in general.
oh and of accusation that the adb sideload probably doesnt send data correctly (from which i heard lots of stories of the past), i even pushed the zip file via adb push to / and installed it with adb shell twrp install /lineageos.zip. same result.
what i would really like to see is an debug log of the installer zip. you only see "part 1 and part 2" installing and percentage, but no informations what the installer is doing currently. this would help a lot if there would be a switch for the installer like "verbose information"
edit again.
I finally managed to do the install. You know what? it is possible without the touch gui. what i did was:
*reflashed via fastboot the stock rom
*booted normally, installed the latest upgrade (Stock ROM OTA - took a long while) - (may be obsolete)
*booted to fastboot, flashed newest twrp to boot
*booted to recovery
*adb shell twrp remountrw
*adb shell twrp remountrw (the /tmp/recovery.log showed interestingly at first remountrw the page set of readonly, at second time not - why?)
*adb shell
*entered in adb shell mount /system
*adb shell twrp wipe data
*adb push lineageos.zip /data/
*adb shell twrp install /data/lineageos.zip
*adb push ddv.zip /data/
*adb shell twrp install /data/ddv.zip
*adb shell getprop ro.boot.slot_suffix (to get the actual boot slot)
*adb reboot bootloader
*fastboot --set-active=_a (for me i was on b before, so i needed to go to a)
*fastboot flash vbmeta_a --disable-verity --disable-verification vbmeta.img
*fastboot reboot
*then the phone - now on lineage - asked me to factory reset, i did
*booted finally successfully up to lineage 17.1 - wlan, mobile network working just fine
if you want gapps on it, install them ideally direct after your custom rom is able to boot. in my case gps didnt worked with gapps and other apps till i did another factory reset. and the original launcher that comes with the cust-rom doesnt work anymore after installing the gapps. use the pixel launcher instead. after that, it works like a charme
in conclusion: a bit odd how the install not works as in the description was told. maybe the TA-1196 is just a bit different.

Hello Together,
i've installed LineageOs yesterday and i realy like it . I just can't find an camera App that supports the wideAngle Camera at the back.
Open Camera only recognizes 2 Cameras, and GCam 7.0 Nokia 7.2 Mod can't seem to access it either.
Is there a solution to this?
Best regards
Alex

Changelog Fri Nov 13 23:24:47 IST 2020
==============================
- based on latest lineage sources
- November 2020 security patch
- fixed bluetooth audio
- fixed mic
- fixed RIL
- fixed headset
- based on android 10 prebuilt vendor for now ( DDV2.340 )
- Comes with stock kernel
- linux version 4.4.192
- compiled using gcc
- fixed battery drain
- fixed styles and wallpapers
- selinux enforced
- banking apps working
- use NikGapps

Got brand new nokia 7.2 yesterday, developer loaded old android build 1_130 and unlocked bootloader, didnt recommend twrp as this wol break wi-fi. Can I flash this OS on my phone directly without twrp ? will wifi and camera work as it should? Sorry for the questions I am new here and just started reading this Thank you

Nokia is nowadays very slow in giving security patch updates to its devices. Its a high time we switch to custom rom..?
I'm waiting for my phone's warranty to get over. Anyways, do anyone have any eta on when this rom will get official?

I have managed finally to install it, but sorry, nothing mentioned work: no double tapp sleep or wake up, no fingerprint, no slinux enforced, camera is not worth to mention at all and i still didnt test bluetooth or microphones yet. ..

dariuslapsys said:
I have managed finally to install it, but sorry, nothing mentioned work: no double tapp sleep or wake up, no fingerprint, no slinux enforced, camera is not worth to mention at all and i still didnt test bluetooth or microphones yet. ..
Click to expand...
Click to collapse
I agree for tapp to wake up and selinux.
Nevertheless, bluetooth and microphones and fingerprint sensors are working like a charm.
NFC is not mentioned anywhere, but I don't need this function at all.
I installed the build from 14/11.
@Raghu varma: Can we help you out sending logfiles for some issues? Do you need testers?

Raghu varma said:
Note - Iam Not Responsible for bricked devices
About LineageOS
LineageOS is a free and open-source operating system for set-top boxes, smartphones and tablet computers, based on the Android mobile platform. It is the successor to the custom ROM CyanogenMod, from which it was forked in December 2016 when Cyanogen Inc. announced it was discontinuing development and shut down the infrastructure behind the project. Since Cyanogen Inc. retained the rights to the Cyanogen name, the project rebranded its fork as LineageOS.
LineageOS was officially launched on December 24, 2016, with the source code available on GitHub. Since that time, LineageOS development builds now cover more than 185 phone models with over 1.9 million active installs,having doubled its user base in the month February–March 2017 And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Installation procedure
Note - I don't recommend you people to flash any other custom kernels on this ROM untill Nokia release kernel sources. Because this ROM supports only stock kernel .
1. Download Rom.zip , twrp.img & vbmeta.img
2. power off your phone boot in to bootloader mode and flash twrp
3. Boot in to Twrp
4. Format data by typing yes
5. Wipe everything
6. Flash rom.zip & vendor.zip
7. Now tap on reboot and check your current active slot.
Example - if twrp shows current active slot A change to B if B change to A
8. Tap on reboot and tap on bootloader ( this will reboots your phone to bootloder mode )
9. Now open cmd in pc flash vbmeta using this command
for slot-a > fastboot flash vbmeta_a --disable-verity --disable-verification vbmeta.img
for slot-b> fastboot flash vbmeta_b --disable-verity --disable-verification vbmeta.img
( thanks to @singhnsk for this step )
10. now type fastboot reboot
and wait for 3 min rom will boot up
Credits
* LineageOS & CO (For Source Code)
* All the authors in my git sources
* Nokia For Prebuilt Vendor & Kernel Source
* Moderators (For Giving Freedom To Post Threads)
* My entire Nokia 7.2 community Thank you all for your massive support Again
Join Nokia 7.2 Community

Download Rom
Download Vendor
Download vbmeta
Download GApps
Download Official Twrp
Android OS version: 11.0.0_r17
Security patch level: November 2020
Build author: Raghu varma
My build script: https://github.com/RaghuVarma331/scripts
Kernel Source code: https://github.com/RaghuVarma331/android_kernel_nokia_sdm660
Source code: https://github.com/LineageOS
Click to expand...
Click to collapse
When i install this rom volte function not proper working outgoing not work incoming volte works reply what is this

When i install this rom volte function not proper working outgoing not work incoming volte works reply what is this

[ROM][OFFICIAL][hotdog][10] RESURRECTION REMIX [MAY] [2021]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Resurrection Remix Q
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Resurrection Remix the ROM has been based on LineageOS, SlimRoms, Omni and original Remix ROM builds, this creates an awesome
combination of performance, customization, power and the most new features, brought directly to your Device.
Many things that in previous versions were tweaked with mods, are now included by default in the ROM so, please enjoy!
Special thanks to, the LineageOS team, Omni team , SlimRoms and of course to all the supporters.
Flash 10.0.12 OOS firmware via fastboot. Link is below in Downloads
Clean flash (RECOMMENDED IF COMMING FROM ANOTHER ROM):
INSTRUCTIONS
• Unpack the payload.bin using Payload Dumper
• Make sure you have the latest fastboot installed
Reboot to Fastboot mode with key combinations or using adb reboot bootloader
Reboot to fastbootd using fastboot reboot fastboot (from active device use : adb reboot fastboot to boot directly to fastbootd)
Follow all the next instructions carefully
vvvvvvvvvvvvvvvvvvv
Code:
[/B][/CENTER][/B][/CENTER][/B][/CENTER]
[B][CENTER][B][CENTER][B][CENTER]• fastboot reboot fastboot
• fastboot devices
• fastboot -w[B][COLOR="darkred"] (THIS WIPES INTERNAL STORAGE SO BACKUP YOUR DATA)[/COLOR][/B]
• fastboot erase system
• fastboot erase boot
• fastboot erase odm
• fastboot erase product
• fastboot erase vbmeta
• fastboot erase vbmeta_system
• fastboot erase vendor
• fastboot erase dtbo
• fastboot flash system system.img
• fastboot flash boot boot.img
• fastboot flash odm odm.img
• fastboot flash product product.img
• fastboot flash vbmeta vbmeta.img
• fastboot flash vbmeta_system vbmeta_system.img
• fastboot flash vendor vendor.img
• fastboot flash dtbo dtbo.img
• fastboot reboot

-UPDATE INSTRUCTIONS-
- Download the latest build of Resurrection Remix ROM
• Unpack the payload.bin
No Need for fastboot -w as this wipes data and internal storage
Follow carefully
vvvvvvvvvvvvvvvvvvv
Code:
[/B][/CENTER][/B][/CENTER][/B][/CENTER]
[B][CENTER][B][CENTER][B][CENTER]• fastboot erase system
• fastboot erase boot
• fastboot erase odm
• fastboot erase product
• fastboot erase vbmeta
• fastboot erase vbmeta_system
• fastboot erase vendor
• fastboot erase dtbo
• fastboot flash system system.img
• fastboot flash boot boot.img
• fastboot flash odm odm.img
• fastboot flash product product.img
• fastboot flash vbmeta vbmeta.img
• fastboot flash vbmeta_system vbmeta_system.img
• fastboot flash vendor vendor.img
• fastboot flash dtbo dtbo.img
• fastboot reboot


ROM Download links and change-logs are below
ROM
FIRMWARE : 10.0.13
GAPPS Already included
Sources :
ROM
Device Source Code
Kernel
Major thanks to
-> RR Team <-
XDA Developers
Phhusson for Treble trees
LineageOs Team
Omni Team
DU Team
AICP
Crdroid
Special Thanks to : MR ACAR (former RR team member)
And Of Course To All The Supporters, Donators And Users
-> Reporting bugs <-
If you have a major bug to report that has not been reported already, please take the following steps to report it to us. It will save you, Team Resurrection Remix and me quite some time.
Download the Catlog app from the Play Store.
There is also a donate version which you can purchase to show appreciation.
After downloading the Catlog app, go to the app settings, and change the log level to Debug.
Clear all previous logs and take the exact steps to produce the error you are receiving. As soon as you receive the error (probably a force close), go straight into Catlog and stop the log recording.
Copy and paste the entire log either to Hastebin or Pastebin
Save the log, and copy and paste the link into the thread with a brief description of the error.
Join our Telegram channel : https://t.me/resurrectionremixofficial
Check FAQ on POST #2
Show your support to Resurrection Remix ROM

XDA:DevDB Information
Resurrection Remix, ROM for the OnePlus 7T Pro
Contributors
varund7726
Source Code: https://github.com/ResurrectionRemix/
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest OOS 10.0.13
Based On: LOS
Version Information
Status: Stable
Created 2020-04-12
Last Updated 2021-05-17

FAQS {READ BEFORE POSTING}
Q1 Why can't I reboot to fastbootd?
Because you don't have the latest fastboot tools from google. Get them HERE
Q2 Fastboot -w is not recognized as a command
You are not on fastbootd . You are on regular fastboot(bootloader)
Reboot to fastbootd with fastboot reboot fastboot( from bootloader) or adb reboot fastboot (from system).
Fastbootd looks like OOS recovery and not like regular fastboot
Q3 I can't pass safetynet/I can't get cts profile to be valid.Now?
Flash Magisk and enable Magisk Hide
Learn how HEREhttps://forum.xda-developers.com/7t-pro/how-to/10-0-3-patched-boot-image-oneplus-7t-pro-t3986351
Q4 OTA updater doesn't work? FIXED
On purpose. Because we don't have a twrp.
Q5 My Device is stuck in Booloop / Stuck on 1+ logo
Either you have not done a clean flash if coming from another rom (fastboot -w) or you have missed something in flashing.
Make sure you follow all the steps. and make sure you have the latest fastboot tools from the link above to access fastbootd
Q6 Fingerprint scanner causes screen glitch
Known issue in all roms NOT ANYMORE. FIXED!!
Q7 Google pay won't work. Says my device is rooted. What do I do?
Flash Magisk then follow these instructions
Q8 WIll This work for Mclaren Edition of the phone?
Yes. Im personally using a HD 1913 McLaren edition. Altough I have heard reports of the t-mobile one (HD1915) having issues with RIL.
Other variants should be fine.
HD1915 I'm not sure about the 5G being retained .if it works on LOS 17.1 it works here too. Same rules apply
Q9 Why isn't X feature there? Its there in xyz rom
I have recently worked on this due to the quarantine situations that gave me time to work on it. I have worked alone and currently I am working on my own because everyone is busy with their own lives right now. If you have a feature request, I will not guarantee adding it because I may get busy.
I built this ROM for personal use but since evryone is sitting at home now I thought to publish it.
Q10 Why didn't we develop RR Q this year?
Same reason. Everybody busy with real life.
Q11 Will we be back in the next Android version?
Sure.
Q12 Will this Rom get updates?
Yes. Regular upto some point
Q13 Does this ROM come with OOS CAM?
Yes although video recording is broken. Everything else works fine . Use Snap (stock) cam for this.
FIXED!
Q14 Can I build this rom from source?
Currently no as only I have access to that. I want to keep it this way for Android 10 to avoid all the hastle.
Q15 Any other supported devices?
None as of now and I dont plan to. This rom is only for the Oneplus 7T Pro, OnePlus 7 pro and OnePlus 6T fajita as the others have a lot of roms anyways. Although I might just make this build for Oneplus6 (enchilada)

Special Notice
Code:
Hi guys, I hope you guys are home and safe. These are crazy times and everybody is at home. This ROM is a little gift for those who are bored and want to have a little fun. Enjoy, be safe & take care

Screenshots

Can I use this one the OnePlus 7t pro 5g McLaren from tmobile and still get 5g if so how would I will I be able to flash this and is there a different steep I need to take to have it work

NickMidd91 said:
Can I use this one the OnePlus 7t pro 5g McLaren from tmobile and still get 5g if so how would I will I be able to flash this and is there a different steep I need to take to have it work
Click to expand...
Click to collapse
Please read FAQ
Like I said , if it works on LineageOS it will work with this rom as the kernel is the same

varund7726 said:
Please read FAQ
Like I said , if it works on LineageOS it will work with this rom as the kernel is the same
Click to expand...
Click to collapse
Ok thanks but I have not tried it on that rom

Holy **** that's awesome.
Any luck on future fixing oos camera recording?

kubek1334 said:
Holy **** that's awesome.
Any luck on future fixing oos camera recording?
Click to expand...
Click to collapse
Try this, go in OOS Camera, Enable Wide angle lens, then go to video.
Worked for me in other AOSP roms that had problems with video mode

New build is up
Main changes
--
Code:
--- added scrolling screenshot
-- added 2 new accents in themes ( lime and rich red).
-- fix screen recorder audio
-- added faceunlock (settings-> security -> face unlock)
--added AOD tile
-- Minor fixes

didn't expect this coming! good old RR mate tell us if gcam works with photo and video and if autobrightness works as it should? Lineage has this issue and this rom is based on Lineage, so is this working properly? thanks man for your hard work, I see you push builds today with fixes, I hope RR will shine on our beloved device

autobrightness is working fine,
could you add ambient display settings? (i dont see such option on settings)

When selecting a notificantion from the lockscreen doesnt let me use the fingerprint to unlock the device, only the pattern

Just booted for me, everything seems to work except of fingerprint sensor
thank's for your work

Fingerprint is working except fact that it causes screen to flash (usually issue on custom roms)
However autobrightness is too Darka.
Anyway awesome rom

cant get magisk to work
hey guys cant get magisk to work put boot img in internal storage and when to install it does nothing and cant twrp as it doesnt work atm oneplus 7t pro sorry noob david

There is no twrp. Read manual once more time

heardd11 said:
hey guys cant get magisk to work put boot img in internal storage and when to install it does nothing and cant twrp as it doesnt work atm oneplus 7t pro sorry noob david
Click to expand...
Click to collapse
you must patched first the boot img in magisk.
then boot the patched img in fastboot and if its boot go to magisk and do direct install. and reboot.
Verstuurd vanaf mijn OnePlus 7T Pro met Tapatalk

beaverhead said:
you must patched first the boot img in magisk.
then boot the patched img in fastboot and if its boot go to magisk and do direct install. and reboot.
Verstuurd vanaf mijn OnePlus 7T Pro met Tapatalk
Click to expand...
Click to collapse
you must patched first the boot img in magisk did this and it doesnt do anything were im stuck its weird done it on oxygen os david

Can we flash on regular 7p not t

[ROM][testing] AICP 15.0 - q10.0 - apollo (Sony XZ2 Compact)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Note: No official builds for now.
Test builds: https://androidfilehost.com/?w=files&flid=309318
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
- You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
No.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service. However, please make sure to backup your device regularly in case something goes wrong.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
0. Install the latest stock ROM, ideally to both slots or use the LineageOS copy-partitions.zip
1. Boot a current TWRP
2. Factory reset
3. Flash the ROM zip
4. Optional: Reboot to recovery, then flash add-ons like GApps, Magisk etc.
How to upgrade from an older AICP build to a newer test build:
1. Make sure you have advanced reboot enabled: Settings/AICP Extras/Auxiliary buttons/Power menu/Advanced Reboot
2. Press the power button, select "Advanced" and "Recovery" to enter the inbuilt TWRP recovery
3. Flash the ROM zip
4. Optional: Reboot to recovery, then flash add-ons like GApps, Magisk etc.
Old instructions:
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
1. Flash latest stock ROM (52.1.A.0.672)
-> either with sony flashtool ("emma") or xperifirm + newflasher
2. Unpack the ROM tar
Code:
> tar -xzvf the_file_you_downloaded.tar.gz
2. Flash the ROM
Code:
> fastboot flash boot boot.img
> fastboot flash dtbo dtbo.img
> fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
> fastboot flash system system.img
> fastboot flash vendor vendor.img
> fastboot flash userdata userdata.img
Skip flashing userdata if you are comming from an older AICP 15.0 build and want to upgrade without losing your data!
3. Reboot to the ROM
Code:
> fastboot reboot
First boot might take a few minutes.
4. Optional: flash GApps and/or Magisk
- Enable Advanced Reboot in Settings / AICP Extras / Hardware buttons / Power menu
- Press power button, select Advanced > Recovery
- Use the inbuilt TWRP recovery to flash zips
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
Note: no official builds for now.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_sony_sdm845/tree/q10.0
Device tree source:
https://github.com/AICP/device_sony_apollo/tree/q10.0
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
- Olivier
- Sjll
- MartinX3 - thanks to him for allowing me to include his TWRP
- The sony open devices team and contributors
- LineageOS team
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
Android Ice Cold Project (AICP) 15.0 (q10.0) apollo (Sony XZ2 Compact), ROM for the Sony Xperia XZ2 Compact
Contributors
SpiritCroc
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked bootloader
Version Information
Status: Testing
Created 2020-04-26
Last Updated 2020-10-18

Nice job!
SpiritCroc said:
Offline charging is broken, your device will boot when you connect a charger to a switched off
Click to expand...
Click to collapse
You may want to cherry-pick this kernel patch - it will fix offmode charging.

Olivier said:
Nice job!
You may want to cherry-pick this kernel patch - it will fix offmode charging.
Click to expand...
Click to collapse
Great, thank you!

Nice work!
(Damn! Not the first who comment!)
[emoji2957][emoji12]

don't need to flash sony oem? ( https://developer.sony.com/file/download/software-binaries-for-aosp-android-10-0-kernel-4-14-tama/ )

nikkdib said:
don't need to flash sony oem? ( https://developer.sony.com/file/download/software-binaries-for-aosp-android-10-0-kernel-4-14-tama/ )
Click to expand...
Click to collapse
No
It's a stock based ROM

MartinX3 said:
No
It's a stock based ROM
Click to expand...
Click to collapse
so in this rom will never be a gcam?

nikkdib said:
so in this rom will never be a gcam?
Click to expand...
Click to collapse
Yes, on the other side SODP and stock doesn't share the same bugs

nikkdib said:
so in this rom will never be a gcam?
Click to expand...
Click to collapse
In case the sony open devices program at any point in the future catches up with stock-based solutions concerning performance and functionality, I might switch to it as well.
For now, I experience the best results with a stock-based approach.

Would flashing this ROM fix the quiet microphone issue?

pakman5391 said:
Would flashing this ROM fix the quiet microphone issue?
Click to expand...
Click to collapse
The microphone is loud enough for me, but I don't know your issue personally, so your best bet is to try it out I guess

I uploaded a new build.
I have not tested a dirty flash this time, so I recommend to do a full backup to external storage in case something goes wrong if you try to upgrade from the previous AICP build (otherwise, you need a clean flash either way).
This time, it's a flashable zip (instead of images for fastboot), I have updated the install instructions accordingly.
This update features enforcing sepolicy (thanks to @Olivier and @Sjll for their work on the offcial lineage trees).
It might be ready for official AICP builds, but I don't know if it's worth it since I have not received any user feedback yet and don't know if there is actually demand... so if you use AICP, would be great if you could provide some feedback

I will definitely flash this when i'm in vacation. Needed a working phone to manage things because of a car accident.
Things are done now and it's time to say goodbye to pie.

Bug report: Proximity sensor not working
Edit: it seems that are other sensors too...

shamllakh said:
Bug report: Proximity sensor not working
Edit: it seems that are other sensors too...
Click to expand...
Click to collapse
These are working for me. Have you flashed the latest stock ROM (52.1.A.3.49) to both slots before flashing latest AICP?

SpiritCroc said:
These are working for me. Have you flashed the latest stock ROM (52.1.A.3.49) to both slots before flashing latest AICP?
Click to expand...
Click to collapse
I flashed the 52.1.A.3.49 using xperiafirmware flasher.
Then, i used the old method (fastboot method) to flash the AICP rom...
Did i miss anything?

shamllakh said:
I flashed the 52.1.A.3.49 using xperiafirmware flasher.
Then, i used the old method (fastboot method) to flash the AICP rom...
Did i miss anything?
Click to expand...
Click to collapse
So you flashed the old build (20200425_1435)? That one might need older firmware (around 52.1.A.0.672).
For the newest AICP build (20200731_1348), you need the new firmware (52.1.A.3.49) and the new instructions.

SpiritCroc said:
So you flashed the old build (20200425_1435)? That one might need older firmware (around 52.1.A.0.672).
For the newest AICP build (20200731_1348), you need the new firmware (52.1.A.3.49) and the new instructions.
Click to expand...
Click to collapse
Thanks a lot for the hint
I re-flashed the 25.1.A.3.49 via newflasher33, then flashed the AICP ROM via fastboot.
Now it works fine.
:fingers-crossed:

I finally found the time to flash my xz2c with this great rom and first i want to thank @Olivier for the official LOS base and second @SpiritCroc making this possible on this device!
As i use Aicp since years as my main Rom on my HTC One M8 i know what i'm getting with this.
However i had problems with installation: no matter what i did, i could not get the "zip" flashing to boot.
I first used Newflasher to update to the latest stock Rom, then i booted it twice to finish the carrier installation.
then i booted up twrp and flashed the zip file. Once, for the unused slot, then on the other slot. Spent a whole evening without succes...don't know what was wrong. Unfortunately i'm not used to this A/B flashing.
I then used this guide/files to extract the img files and flashed them with fastboot. That worked like a charm!
All in all this Rom has almost no problems and is faster than stock to me. Some things i noticed so far:
- biggest (and only real) problem (and as far as i heard it is the same on the LOS base) the ringtone/notification sound is is quieter than stock. I hope this can be solved, because stock was not really loud already
- flashlight brightness is not really bright, same like stock rom i think. I used some modded lib files from an Android 9 mod to make it brighter.
- i miss the option to change the visual appearance of the navbar button which was available until Android 9 in Aicp
- screen colors seems to be much more brighter, it looks much more better than stock to me
I will continue testing and see what i'll find.
All in all this Rom with it's many features is definitely worth flashing it!!!

!!! KUDOS !!!
AICP-q10.0_apollo_20200731_1348 is the first the most customizable and fully working ROM for Xperia XZ2C, if not the only one at all. I have not tested all the goods yet, but the most important features are here:
* fully working TWRP v3.4.0.0 - no issues with touch every time! until now the only TWRP working for me was the one booted with fastboot, all the flashed TWRPs had either touch issues or SD card issues
* SafetyNet basicIntegrity passed! - ctsProfile can be easily fixed with MagiskHide Props Config and therefor we have a full SafetyNet passed along with Magisk, allowing the banking and all the other sensitive apps to work
* WIFI
* Bluetooth (audio and calling)
* GPS
* fingerprint
* camera (but not the Sony one )
* encryption with TWRP decryption working
* SD card with exFAT
* notification LED
A few installations points from me
The ROM Installation was very easy and quick, but I was doing a total clean install. Here is what I did
1. Install Sony's stock ROM 52.1.A.3.49 with newflasher
2. Boot TWRP v3.4.0.0 stock version with fastboot
3. Flash AICP-q10.0_apollo_20200731_1348.zip (please note the messages, it should flash to "inactive slot B")
4. In TWRP select Reboot => Slot B => Recovery... to reboot the phone into recovery in Slot B
5. Flash Gapps
6. Format data (just in case, many times without format with other ROMs I got bootloop)
If you need fully working Magisk with full SafetyNet pass (steps are not logical and obvious but it works, tried it w few times):
1. Flash Magisk v20.1 or v20.3.... later versions breaks the basicIntegrity! If you have flashed later Magisk version simply use Magisk Unistaller zip in TWRP and flash v20.1 or v20.3
2. Boot the phone and update Magisk Manager to the latest version 8.0.2 (307) with an option inside the Magisk Manager
3. Go back to the TWRP and now you can flash Magisk v20.4 or v21.0 - this time flashing does not break the basicIntegrity and those versions are required to fix the ctsProfile
4. Install MagiskHide Props Config module in Magisk Manager
5. Install Terminal Emulator
6. Run terminal and enter the commands su followed by props
7. Change fingerprint to XZ2C with the following options: 1 => f => 27 => 20 => reboot
Ok, so what are the drawbacks? Well not much and more personal preferences I think:
1. Missing Sony's stock camera app. I tried to flash those zips below but I get "unknown error" when I try to launch the app. Do you think it would be possible to make the Sony camera work with your ROM?
https://androidfilehost.com/?w=search&s=semccamera
2. Missing custom navigation bar buttons. On the RR ROMs I used to work the most it was possible to add extra navigation buttons and assign customized actions for tap, long press, etc.
3. Slow auto brightness reaction (I can live with that)
4. Veeery low flashlight level (there was a solution for XZ1C to fix that, I have to dig a little bit to see if it can be done here as well)
5. Ambient Display - to show notifications on blocked screen
Please don't give up the project. There is not much going with the XZ2C custom development, the last and only "normal size" Android phone.
Do you think you can take a look at some of my "drawbacks" and try to fix them?
Do you think you will make some other ROMs for XZ2C in the future, like ResurrectionRemix, EvolutionX, HavocOS?

[ROM][10] LineageOS 17.1 [OFFICIAL]

FEATURES AND ISSUES
Code:
- Boot: Ok
- Bluetooth: Ok
- WiFi: Ok
- WiFi Hotspot: Ok
- Wireless display: Ok
- RIL - Phone - Data: Ok
- VoLTE: Ok
- GPS: Ok
- Camera: Ok
- Camcorder: Ok
- Lights: Ok
- MicroSD: Ok
- Accelerometer: Ok
- Compass: Ok
- Gyroscope: Ok
- QTI sensors: Ok
- Touchscreen: Ok
- FM Radio: NA
- Fingerprint: Ok
- Vibrator: Ok
- Microphone: Ok
- Audio & music: Ok
- Bluetooth audio: Ok
- NFC: Ok
- Kernel: Ok
- Graphics: Ok
- 3D Rendering: Ok
- Clock: Ok
- DRM: Widewine L3
- Offline Charging: Ok
- USB: Ok
- USB Tethering: Ok
- USB OTG: Ok
- Encryption: Ok
- SEPolicies: Enforce

Change Log
2020.7.30 The end of unofficial version
Support glove mode.
2020.7.25
Strengthen vibration.
Selinux enforced.
2020.7.19
Support Exfat.
2020.7.5
July security update.
Fix stock camera crashed sometimes.
Support 802.11ac wireless hotspot.
2020.6.15
New fingerprint drivers from SODP.
Support dual sim and SD cards at the same time.
Kernel update to 52.1.A.2.1.
June security patch.
2020.5.26
Fix mic when using loadspeaker.
Update to 52.1.A.2.1.
Creator mode ported from Xperia 1. (Livedisplay)
2020.5.25
Wireless display fixed.
Strict thermal config.
Single & dual model detect.
2020.5.24
Sony camera flashable zip.
2020.5.15
1. New notification LEDs.
2. Lineage Update
2020.5.3
1. Fix brightness control bug on 5.2.
2020.5.2
1. Fix notification LEDs.
2020.4.29
Fix USB tethering.

First!
Thank you for providing a stock variant of LineageOS!
We should distinguish them by writing SODP and STOCK in our thread titles or more people will ask questions.

MartinX3 said:
First!
Thank you for providing a stock variant of LineageOS!
We should distinguish them by writing SODP and STOCK in our thread titles or more people will ask questions.
Click to expand...
Click to collapse
Thank you for your effort on SODP as well, I agree with you

If you flashed oem and meet any issues, I could only say you are a hanhan.
You are a hanhan
Hanhan
Dose laowai know what's means of hanhan??
Anyway thank you for your new rom

tainhao said:
If you flashed oem and meet any issues, I could only say you are a hanhan.
You are a hanhan
Hanhan
Dose laowai know what's means of hanhan?
Anyway thank you for your new rom
Click to expand...
Click to collapse
We laowai should know it.
It's just a short google away. :silly:

你好，这个ROM我刷了一下，截个图然后在QQ想发给别人结果找不到，我重刷了3遍仍然无法解决，然后想问一下twrp和migisk应该如何刷入，希望您可以回复我

mingzhenliu said:
你好，这个ROM我刷了一下，截个图然后在QQ想发给别人结果找不到，我重刷了3遍仍然无法解决，然后想问一下twrp和migisk应该如何刷入，希望您可以回复我
Click to expand...
Click to collapse
Please use the english language.
Then more people can help you.
There are useful translators like https://translate.google.com/

sorry,I‘m a Chinese
the question is how to install twp and maagisk in this rom?
and in this rom,i take a screenshot,try to send it in social apps,but I can't find my screenshot
so,can you help me ?

mingzhenliu said:
sorry,I‘m a Chinese
the question is how to install twp and maagisk in this rom?
and in this rom,i take a screenshot,try to send it in social apps,but I can't find my screenshot
so,can you help me ?
Click to expand...
Click to collapse
No problem
It's just that we are an international community and don't want to exclude anyone
(I did learn English, too)
Since it's a stock based ROM and the official stock firmware is one month behind the security patch level, this April security patches lineageOS won't work with the twrp
(Google rollback protection)
But I will release a TWRP without userdata decryption, which should work anyway.
But rooting is still possible.
Just unzip the lineageOS.zip
Use the payload_dumper I linked in the SODP lineageOS thread to extract the boot.img file
Then patch the boot.img file in the magical manager app
And flash it back via fastboot

MartinX3 said:
No problem
It's just that we are an international community and don't want to exclude anyone
(I did learn English, too)
Since it's a stock based ROM and the official stock firmware is one month behind the security patch level, this April security patches lineageOS won't work with the twrp
(Google rollback protection)
But I will release a TWRP without userdata decryption, which should work anyway.
But rooting is still possible.
Just unzip the lineageOS.zip
Use the payload_dumper I linked in the SODP lineageOS thread to extract the boot.img file
Then patch the boot.img file in the magical manager app
And flash it back via fastboot
Click to expand...
Click to collapse
thanks alot

Disadvantages:
camera key:not working
lift to wake(抬起唤醒）：not working
application install:soooooo slow....
and always system crash(死机，卡死)
camera can use hmd camera,but when you try to manuall take photo(手动拍照),no apps can do
advantage:
it's a stable android 10!!!
Hope to fix that

My phone has one sim card but this rom shows two slots. Problems - doesn't detect my sim card. How fix?

tainhao said:
If you flashed oem and meet any issues, I could only say you are a hanhan.
You are a hanhan
Hanhan
Dose laowai know what's means of hanhan?
Anyway thank you for your new rom
Click to expand...
Click to collapse
Hanhan is "憨憨" in Chinese. The two words own tons of imformation. It is difficult to explain it in English.
mingzhenliu said:
你好，这个ROM我刷了一下，截个图然后在QQ想发给别人结果找不到，我重刷了3遍仍然无法解决，然后想问一下twrp和migisk应该如何刷入，希望您可以回复我
Click to expand...
Click to collapse
截图分享问题是Lineage或者QQ的问题，magisk用官方10的方法刷入，twrp没有，但是自带的Lineage recovery可以刷入Gapps，够用了。
If you met any problem about share screenshot, this is a bug of Lineage or tencent QQ. For Magisk, you could patch the boot image as stock 10.0. For recovery, we don't have twrp now, But you could use lineage recovery for Gapps.
mingzhenliu said:
Disadvantages:
camera key:not working
lift to wake(抬起唤醒）：not working
application install:soooooo slow....
and always system crash(死机，卡死)
camera can use hmd camera,but when you try to manuall take photo(手动拍照),no apps can do
advantage:
it's a stable android 10!!!
Hope to fix that
Click to expand...
Click to collapse
细枝末节的小问题我们正在处理，卡死的问题不存在，请检查你的官方固件版本、区域。任何第三方app的问题去反馈给相应的开发者，如果你使用Magisk遇到任何问题，请不要进行反馈，我只对固件负责，不对任何对系统的修改负责。
For some small issues, we are checking it now. System is stable, if you met any crash, try to check your stock FW's version and area. If you met any problem about 3rd apps or Magisk and its modules, pleasedon't feedback, we are only respon for LineageOS, not your hacks.
joro1973 said:
My phone has one sim card but this rom shows two slots. Problems - doesn't detect my sim card. How fix?
Click to expand...
Click to collapse
Our judgement for single model is not completed, you could try to flash stock firmware of dual model, after that you could flash LineageOS. Then sim card work work.
If you need VoLTE, you need to flash the oem.sin for your country/area after flash the dual FW.

The microphone cannot be used in speaker mode:crying:

mingzhenliu said:
The microphone cannot be used in speaker mode:crying:
Click to expand...
Click to collapse
Comfim it. Thanks.

音量大小不太正常，小于50%声音特别小，大于50%声音超级大…
Sound size is abnormal,less than 50% of the sound is particularly small, more than 50% of the sound is super loud ...

我用的H8296，在中国插移动卡，信号比官方版差太多…
My device is H8296，china mobile,signal is too poor

mingzhenliu said:
音量大小不太正常，小于50%声音特别小，大于50%声音超级大…
Sound size is abnormal,less than 50% of the sound is particularly small, more than 50% of the sound is super loud ...
Click to expand...
Click to collapse
音量的线性曲线是有点问题，我检查一下吧。
Ok, It seems that this problem exists, I will check the reason later.
mingzhenliu said:
我用的H8296，在中国插移动卡，信号比官方版差太多…
My device is H8296，china mobile,signal is too poor
Click to expand...
Click to collapse
我这里提个方法，麻烦你回去测试一下。你严格固定手机在同一个位置，在官方和LineageOS下面分别间隔3分钟测试三次信号强度值（一共6个）。信号强度，在设置-关于手机-SIM卡状态-信号强度。如实反馈给我。
Here is a method to dump the status of signal strength, Please make sure the phone keeps the same position when you test. Feedback the value of Setting-About phone-SIM status-Singal strength. Please test it on stock and LineageOS, dump value each 3 min. 6 values totally.

[12.1][GSI][ROM][ CURTANA | JOYEUSE | EXCALIBUR][AOSP+GAPPS][9/7/22]

Changelog:
9/7/22:
* July Google security patch
9/6/22:
* Fixed the fingerprint issue in 12.1 (12L) that prevented me from releasing the latest build
* June security patch (12L)
* Some performance tweaks
* Latest Phh patches
13/12/21:
* December patch
* Latest phh patches
* Fixed battery manager crash
24/11/21:
* Fixed bt offload not working
* Fixed monet not working on other 9S versions
23/11/21:
* November security patch
* Added magisk support
* Added monet (theme based on wallpaper)
* Fixed some props not being written on boot
* Fixed some bt issues
12/10/21:
* Fixed CTS not passing (safteynet)
* Added old behavior of power button
11/10/21:
First Beta
* Android 12 Aosp base
* Optimized dalvik vm for better performance in apps
* Updated Gapps wizard and core apps to A12 base
Please report issues

RESERVED...

A job well done, thank you for keeping Curtana alive!

Any issues with your install?

Nice, thanks for the hard work, miatoll rock

New build is on the way, should fix safteynet not passing and return the old behavior of the power button
EDIT: New build is up
Changes:
* Fixed CTS not passing (safteynet), please clear google play services data if you already flashed the old build, if you enable supersu from settings then it will break again so keep in mind, its only for unrooted
* Returned the power button to the old behavior

sooti said:
New build is on the way, should fix safteynet not passing and return the old behavior of the power button
EDIT: New build is up
Changes:
* Fixed CTS not passing (safteynet), please clear google play services data if you already flashed the old build, if you enable supersu from settings then it will break again so keep in mind, its only for unrooted
* Returned the power button to the old behavior
Click to expand...
Click to collapse
Is it possible to implement a setting to have 2 behaviours of the power button as on stock? Press to unlock, or touch to unlock? Press is really preferable as it prevents accidental unlocks when carrying the phone around with the screen off.

Thanks for your hard work.
I Will install the ROM when I get back from Holiday.
Still 3 weeks

Can anyone post some screenshots??

foneiamone said:
Can anyone post some screenshots??
Click to expand...
Click to collapse
It seems there is a problem with screenshot shortcut. I took these using google assistant.

Hello. Is there call recording?

And can i upgrade from android 11? Should i wipe the phone?

mib383 said:
Hello. Is there call recording?
Click to expand...
Click to collapse
Not that I know of.

mib383 said:
And can i upgrade from android 11? Should i wipe the phone?
Click to expand...
Click to collapse
I'm not sure but i think you can upgrade from Android 11. Although i would recommend wiping the phone and doing a clean install.

Thank's for the great work. Audio bluetooth not work, the app phone work ok but show a message when os opened. Android auto don't work, when connect original USB cable, the car detect Android auto but the screen is black. With other curtana MIUI work fine.
Great work!!

I have installed it. But my magisk is broken now as i understand. Can i bring it ti life? Or i should delete it?

rezzocapo said:
Thank's for the great work. Audio bluetooth not work, the app phone work ok but show a message when os opened. Android auto don't work, when connect original USB cable, the car detect Android auto but the screen is black. With other curtana MIUI work fine.
Great work!!
Click to expand...
Click to collapse
Bluetooth works fine here, what device are you using? and what firmware is your vendor?

mib383 said:
I have installed it. But my magisk is broken now as i understand. Can i bring it ti life? Or i should delete it?
Click to expand...
Click to collapse
Off topic, magisk isnt supported by me...

sooti said:
Bluetooth works fine here, what device are you using? and what firmware is your vendor?
Click to expand...
Click to collapse
I'm using curtana 9S. I don't know firmware vendor version. How to get It or flash it?

Develop Bugs

welcome