{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 11 (R), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree source code: https://github.com/Inkypen79/device_xiaomi_andromeda
Kernel source code: https://github.com/Inkypen79/kernel_xiaomi_andromeda
Working:
Almost everything
Broken:
You tell me
Compatibility:
This is for Mi Mix 3 5G (andromeda) only. Not compatible with regular Mix 3 (perseus)
Downloads:
https://sourceforge.net/projects/xiaomi-andromeda/files/T/LineageOS
Installation:
Reboot to recovery
Wipe /system, /vendor, /data and /cache
Install LineageOS zip package
A LineageOS package with built in Gapps is available. No need to flash separately.
Important notes:
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
Contributors
Inkypen
ROM OS Version: Android 13
ROM Kernel: Linux 4.x
Based On: AOSP
Additional installation instructions if coming from stock MIUI:
In order to install a custom ROM you must have an unlocked bootloader. You can apply for this at Xiaomi's official site: https://en.miui.com/unlock/
You then need to install a custom recovery. Official TWRP builds are available, and the official maintainer has a thread with installation instructions here: https://forum.xda-developers.com/mi...covery-unofficial-twrp-xiaomi-mi-mix-t3941867
The official TWRP for Mix 3 5G cannot decrypt A12+ encryption scheme so if you see scrambled filenames in recovery mode and want to access your files then use my unofficial build (version 3.7.0-12.0).
https://sourceforge.net/projects/xiaomi-andromeda/files/twrp-3.7.0_12-0-andromeda.img/download
Once you have TWRP installed, boot into recovery mode. Wipe cache,dalvik,system,vendor partitions.
You are strongly advised to flash the latest modem firmware. You can grab that here: https://xiaomifirmwareupdater.com/firmware/andromeda/
This only needs to be done once, once the updated firmware has been flashed you can forget about it.
WARNING: You will lose all saved files on your internal storage in the next step, make a backup of important files before proceeding
Data partition must be formatted (not wiped) to remove forced encryption. Use the bottom right "Format Data" button in the Wipe menu. You will be asked to type "yes" to confirm your choice.
At this point your internal storage will be empty. Copy the ROM from your PC to the phone, click install in TWRP and select the ROM. If you wish to install gapps/nanodroid, copy it to the phone and install after the ROM. Once you have flashed the ROM and any add ons, you must format internal storage again. Internal storage must be completely empty for the very first custom ROM boot, once a custom ROM has been installed and you want to swap to a different one, further formatting is not necessary.
Reboot back to system and enjoy custom ROM goodness
This post is reserved for FAQs and will be added to when frequently asked questions pop up.
How can I stop the slider from opening the camera?
Go to Settings->System->Gestures->Slider settings
Thanks alot for this Man! Will check it out today and let you know!
I have lineage-18.0-20201204-UNOFFICIAL-andromeda.zip installed. Can I just flash lineage-18.1-20210101-UNOFFICIAL-andromeda-signed.zip over this, wipe /cache and keep /data as is?
Hello, I really want to install this rom especially as it seems the device won't be upgraded. I've never done this before, and tried today but I soft bricked my phone . Got the standard ROM back on now.
Can someone help with what I did wrong.
I followed the instructions on this to down load recovery, https://www.xda-developers.com/how-to-install-twrp/?amp
I managed to get the phone into recovery.
I wiped the cache etc, then I installed the modem firmware which was successful.
Then I formatted the drive as the instructions.
I went to move the ROM into the device but when doing this on the PC is timed out, it wouldn't allow me to move the ROM, once I rebooted the device it continued to go into fast boot.
Any help would be welcome.
Oldmanam said:
Hello, I really want to install this rom especially as it seems the device won't be upgraded. I've never done this before, and tried today but I soft bricked my phone . Got the standard ROM back on now.
Can someone help with what I did wrong.
I followed the instructions on this to down load recovery, https://www.xda-developers.com/how-to-install-twrp/?amp
I managed to get the phone into recovery.
I wiped the cache etc, then I installed the modem firmware which was successful.
Then I formatted the drive as the instructions.
I went to move the ROM into the device but when doing this on the PC is timed out, it wouldn't allow me to move the ROM, once I rebooted the device it continued to go into fast boot.
Any help would be welcome.
Click to expand...
Click to collapse
If you are blocked into fastboot you can reflash the official firmware.
Choose the firmware format : https://xiaomifirmwareupdater.com/miui/andromeda/
pommefrite8 said:
If you are blocked into fastboot you can reflash the official firmware.
Choose the firmware format : https://xiaomifirmwareupdater.com/miui/andromeda/
Click to expand...
Click to collapse
Hi there, I installed the original ROM straight after. Just wondering what I've done wrong. Why I couldn't move the lineage os from the computer to the device.
Looks like ive managed to install it just set it up as i write....
Hey Inkypen,
Thanks a lot for the ROM, it's currently my daily driver.
What's the upgrade process between the linked Lineage 18 ROMs? Also, do you have a change log somewhere?
You mentioned in the other thread that you are more active in the Telegram chat - how can I join that?
carimatia said:
Hey Inkypen,
Thanks a lot for the ROM, it's currently my daily driver.
What's the upgrade process between the linked Lineage 18 ROMs? Also, do you have a change log somewhere?
You mentioned in the other thread that you are more active in the Telegram chat - how can I join that?
Click to expand...
Click to collapse
Apologies for the late reply, for some reason I don't get email notifications about this thread even though I'm subscribed. The Mix 3 support group can be found at https://t.me/mimix3_5G and I'm way more active there. All the admins are pretty friendly and willing to help, I'm about most of the time for help and troubleshooting. You can also get access to all the latest builds and other stuff you can't get on XDA
Hello, thank you for all the detailed explanations but I am currently having some trouble with purple/green lines at the bottom of the screen or at the edges of white tabs? I have installed lineage os and have also tried pixel experience but i have had the same results, I have reinstalled lineage a few time but still the same, with miui I haven't had this problem, so my screen isn't faulty, I will try and install the android 10 version of pixel exp and lineage os to see if there is a difference. the green and purple lines aren't too noticeable but I can't stop looking at them! maybe I have ocd?
pm4rcin said:
Hi @Inkypen, I saw that you've pushed the update yesterday but unfortunately it's not available. Did you discover a critical bug or something? Also what's the current status on that ROM. Is there something that doesn't work?
Click to expand...
Click to collapse
I uploaded a testing build to the wrong place. I've now uploaded the proper build with the May security patch. I've added an additional two extras not in official Lineage which are long screenshot and built in signature spoofing support for micro-g users.
https://sourceforge.net/projects/xiaomi-andromeda/files/R/LineageOS/lineage-18.1-20210507-UNOFFICIAL-andromeda-signed.zip/download
thx great work.
Is there any known issue with the gps?
Lately i have some problems to find my position.
ive been been on 17.1 since last year and decided to upgrade to 18.1. seems pretty stable however i get random lockup/freezes which requires me to perform a shutdown/power up by holding in the power button. i followed the guide, updated to the latest twrp and using the latest build. other than that the battery life and speed is great
Hi! Could files accept characters that are not typically accepted in Windows systems but are in Linux? Like ':', or '?'.
First of all thanks a bunch for this ROM. Been running it for several weeks now, everything has worked fine so far.
Today however I stumbled into an issue: USB Tethering does not seem to work for me.
- tried with 3 computers and different OSs (Windows, Linux) ... never worked
- I have another Android10-based Sony smartphone - for this one USB tethering works fine with all 3 computers
- the computers all recognize my Mi Mix 3, but fail to establish a network connection (no IP obtained?)
Does USB Tethering work for you guys? Or anybody having similar issues?
Thanks!
Sorry guys, I pretty much missed out on A12 Lineage, but I'm back with A13 Lineage for you guys! I will provide both integrated gapps builds and vanilla builds for those that don't want gapps. The official TWRP for andromeda isn't able to decrypt A12+ encryption scheme so I've ported the A12 version of TWRP and OrangeFox for our device. Don't try and install the updated recovery if you're running A11 or below, in that case stick with the official version.
Biggest change to my builds is that OTA updates are now enabled, you'll get a notification prompting to update. The builds are hosted on sourceforge and download speeds can be very slow depending on where in the world you are and which mirror it selects. It might be quicker to download updates on a PC. Not a lot I can do about it, that's the downside of free file hosting.
LOS builds: https://sourceforge.net/projects/xiaomi-andromeda/files/T/LineageOS/
TWRP: https://sourceforge.net/projects/xiaomi-andromeda/files/twrp-3.7.0_12-0-andromeda.img/download
Orangefox: https://sourceforge.net/projects/xi...A12.1-R11.1-Unofficial-andromeda.zip/download
Inkypen said:
Sorry guys, I pretty much missed out on A12 Lineage, but I'm back with A13 Lineage for you guys! I will provide both integrated gapps builds and vanilla builds for those that don't want gapps. The official TWRP for andromeda isn't able to decrypt A12+ encryption scheme so I've ported the A12 version of TWRP and OrangeFox for our device. Don't try and install the updated recovery if you're running A11 or below, in that case stick with the official version.
Biggest change to my builds is that OTA updates are now enabled, you'll get a notification prompting to update. The builds are hosted on sourceforge and download speeds can be very slow depending on where in the world you are and which mirror it selects. It might be quicker to download updates on a PC. Not a lot I can do about it, that's the downside of free file hosting.
LOS builds: https://sourceforge.net/projects/xiaomi-andromeda/files/T/LineageOS/
TWRP: https://sourceforge.net/projects/xiaomi-andromeda/files/twrp-3.7.0_12-0-andromeda.img/download
Orangefox: https://sourceforge.net/projects/xi...A12.1-R11.1-Unofficial-andromeda.zip/download
Click to expand...
Click to collapse
Hi,
first of all, thank you for your follow-up on the roms on the mi mix 3 5g.
I just have one question, why not make it official?
pirloui said:
Hi,
first of all, thank you for your follow-up on the roms on the mi mix 3 5g.
I just have one question, why not make it official?
Click to expand...
Click to collapse
I have one question for you. What benefit is there to being official? The only real perk is OTA updates, which my builds now have.
The requirements to go official for LOS are unbelievably strict, for example I wouldn't be allowed to patch the ROM to pass safetynet or be allowed to take updated device drivers from a QCOM BSP (which I already have done several times). I don't have the time or energy to work around their restrictions.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for Lineage OS is available in the LineageOS Github repo. And if you would like to contribute to Lineage OS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Instructions
First time flashing Lineage OS 14.1 your device?
Coming from a SENSE ROM?
Enable all location services: Settings > Location > (all location services) = On
Coming from another ROM?
Download the zip(s).
Install a compatible Recovery
Perform a NANDroid backup of your current ROM (Optional)
Wipe data & cache partitions of your device (required when coming from stock!).
Flash LineageOS.
Optional: Install the Google Apps addon package.
Downloads
AFH - https://download.lineageos.org/himawl
Root - https://download.lineageos.org/extras
Changelog - https://www.lineageoslog.com/14.1/himawl
Google Apps - http://opengapps.org/?arch=arm64&api=7.1&variant=nano
Official status guys! That was quick. Remember to post some good logs if any problems so we can attempt a fix... https://review.lineageos.org/#/c/167878/
Flyhalf205 said:
Official status guys! That was quick. Remember to post some good logs if any problems so we can attempt a fix... https://review.lineageos.org/#/c/167878/
Click to expand...
Click to collapse
Awesome news, I can't wait to download the first build once the build servers spit it out! Thanks for everyone's continued work on the m9! I'm sure a lot of non-VZ folks will be excited as well!
I'm assuming we should be on the latest Verizon 6.0 firmware for this, 3.37.605.19? (Edit: At time of posting)
I cant wait
Rain__ said:
Awesome news, I can't wait to download the first build once the build servers spit it out! Thanks for everyone's continued work on the m9! I'm sure a lot of non-VZ folks will be excited as well!
I'm assuming we should be on the latest Verizon 6.0 firmware for this, 3.37.605.19? (Edit: At time of posting)
Click to expand...
Click to collapse
As long as you are on any MM firmware. It might not be till next week for official build. You can go ahead and download my custom build to make sure all the bugs are out before official builds get here.
Flyhalf205 said:
As long as you are on any MM firmware. It might not be till next week for official build. You can go ahead and download my custom build to make sure all the bugs are out before official builds get here.
Click to expand...
Click to collapse
Does official Lineage mean official Resurrection Remix (7.1.1)?
If not, I have it ready and will make a thread once you verify.
Thanks
klabit87 said:
Does official Lineage mean official Resurrection Remix (7.1.1)?
If not, I have it ready and will make a thread once you verify.
Thanks
Click to expand...
Click to collapse
Post away.
Sent from my HTC6535LVW using Tapatalk
is VoLTE working with this????
GohanBurner said:
is VoLTE working with this????
Click to expand...
Click to collapse
volte will probably never work on hima aosp roms. HTC have weird modems.
Looking forward to the official LineageOS 14.1 release for the Verizon HTC M9. Thanks for all your hard work, Flyhalf.
In addition to the OS update, I was also looking to update to the latest firmware, 3.37.605.19. I'm currently on the latest unofficial LineageOS 13.0 release from 03/16 with firmware 3.37.605.15.
2 part question--to simply update the firmware, is the correct firmware to flash the 3.37.605.19_NoBoot-NoRecovery_firmware.zip from santod's thread? And is it safe to flash future firmware updates as they are released?
Just trying to avoid any incompatibility with LineageOS (if that's even a thing) and a bricked device.
Thanks!
lithophone said:
Looking forward to the official LineageOS 14.1 release for the Verizon HTC M9. Thanks for all your hard work, Flyhalf.
In addition to the OS update, I was also looking to update to the latest firmware, 3.37.605.19. I'm currently on the latest unofficial LineageOS 13.0 release from 03/16 with firmware 3.37.605.15.
2 part question--to simply update the firmware, is the correct firmware to flash the 3.37.605.19_NoBoot-NoRecovery_firmware.zip from santod's thread? And is it safe to flash future firmware updates as they are released?
Just trying to avoid any incompatibility with LineageOS (if that's even a thing) and a bricked device.
Thanks!
Click to expand...
Click to collapse
Not sure about the firmware version, but keep in mind if you flash the "NoRecovery" firmware, you'll need to flash twrp separately. I just installed "3.37.605.19_NoBoot_TWRP3.0.2-0_firmware.zip" without any issues. I'm on latest LOS 13.0
lithophone said:
Looking forward to the official LineageOS 14.1 release for the Verizon HTC M9. Thanks for all your hard work, Flyhalf.
In addition to the OS update, I was also looking to update to the latest firmware, 3.37.605.19. I'm currently on the latest unofficial LineageOS 13.0 release from 03/16 with firmware 3.37.605.15.
2 part question--to simply update the firmware, is the correct firmware to flash the 3.37.605.19_NoBoot-NoRecovery_firmware.zip from santod's thread? And is it safe to flash future firmware updates as they are released?
Just trying to avoid any incompatibility with LineageOS (if that's even a thing) and a bricked device.
Thanks!
Click to expand...
Click to collapse
Well technically the latest firmware is 3.37.605.28 as of a day or two ago... But to answer you question, yes. All you have to do is flash the NoBoot-NoRecovery_firmware.zip and is perfectly fine to flash future updates.
Remember: Make sure you use the NoBoot No Recovery or else you'll have to find a computer to flash twrp back onto it and flash LineageOS before your phone can boot again.
Thank you both for your replies. Slightly different answers, so I just need 1 thing clarified.
I currently have TWRP installed. If I flash the No Boot-No Recovery, will it only update the firmware and leave TWRP in place and untouched?
lithophone said:
Thank you both for your replies. Slightly different answers, so I just need 1 thing clarified.
I currently have TWRP installed. If I flash the No Boot-No Recovery, will it only update the firmware and leave TWRP in place and untouched?
Click to expand...
Click to collapse
Yes
Battery life seems slightly worse than 13.0 was for me. I'm not a heavy screen-on-time user, so most drain is just passive standby screen off time. If I had to randomly guess, the screen-off drain rate is maybe 35% faster on 14.1 so far.
I have the performance profile set to Efficiency, as I did in 13.0. I may root (or use ADB) and have a look at wakelocks, but based off the battery "History Details" in Settings, the phone does not seem to be getting stuck awake for extended periods of time or anything. I periodically monitored battery voltages too and the battery percentage seems to be accurate, though I don't really have anything to base that on other than knowledge of LiPo/Li-ion batteries.
I'll follow up if I discover anything helpful, but has anyone else noticed slightly worse screen-off battery performance too?
Ok, can someone here tell me how to get root access on this rom? I have tried flashing the armsupersuaddon and armsupersux64 zips, neither worked. Then I tried enabling root access in the dev options and installing SuperSu from the store, that seemed to and went ahead and attempted to install binaries, but now my phone is bootlooping...I am on the latest nightly if that helps, but the first one didn't work with the flashable zips either.
I got root by installing "the LineageOS su add-on", as described in the wiki: https://wiki.lineageos.org/devices/himawl/install#installing-lineageos-from-recovery (addon zip comes from https://download.lineageos.org/extras, "addonsu-arm64-signed.zip").
I tried that one...didn't work. Might try it again after I get my phone setup again, but that's going to take a long while. Ended up having to factory reset, so I need to download a hundred apps and reset all my 2 factor authentications...all for root. Not keen to go through this again.
soulshot96 said:
I tried that one...didn't work. Might try it again after I get my phone setup again, but that's going to take a long while. Ended up having to factory reset, so I need to download a hundred apps and reset all my 2 factor authentications...all for root. Not keen to go through this again.
Click to expand...
Click to collapse
After you flash the root addon zip you have to enable root in developer settings and it should work after that. I know it is a pain but you may want to try to start over again.
But a lot of users are using root less and less these days. I don't have root currently on mine. Don't need it.
Flyhalf205 said:
After you flash the root addon zip you have to enable root in developer settings and it should work after that. I know it is a pain but you may want to try to start over again.
But a lot of users are using root less and less these days. I don't have root currently on mine. Don't need it.
Click to expand...
Click to collapse
Thanks, I'll give it a shot...and I agree about root. I only wanted it because I have the Pixel launcher flashed to my phone as a system app, but its been glitching up and making it to where I cannot swipe cards away on google now, so I was going to install pixelize and use that to see if it's version of the launcher didn't have the issue. So I found myself needing root for the first time since my M7.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community.
It can be used without any need to have any Google application installed.
You will need to provide your own Google Applications package (gapps).
LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo.
And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. Your changelog is whatever was merged into gerrit.
Important information:
This thread is for unofficial LineageOS 13.0 builds for LG G4 model H815 only.
Its a continuation of the official one as it was abandoned back in July and I still prefer MM (N has still bugs and does not support encryption).
Known issues:
the kernel has security bugs which need to be addressed
its in testing state as I cant test it atm.. please report back! PLEASE MAKE A FULL BACKUP BEFORE TESTING!!
Installation:
First time flashing LineageOS 13.0 on your device, or coming from another ROM?
Download the zip(s)
Install latest TWRP from the official twrp.me website
Perform a nandroid backup of your current ROM (optional but recommended)
Wipe data/factory reset
Flash LineageOS
Optional: Install the Google Apps addon package, install the SU addon package(https://download.lineageos.org/extras, choose arm64)
Reboot
Download:
Google Apps:
OpenGApps (choose arm64, 6.0, nano)
TWRP Recovery:
https://twrp.me/devices/lgg4.html
Full Stock ROMs:
H815 V20D
Bootloader:
Remember ---> Flashing bootloader is risky so you flash at your own risk!
H815 V20D
Modem:
H815 V20D
ROM:
Last known fully working is 20170813! Sorry have to fix the blobs first!
Nightlies: http://droid.binbash.it
Sources:
Android: https://github.com/LineageOS
Device: https://github.com/steadfasterX/los_android_device_lge_h815
Kernel: https://github.com/LineageOS/android_kernel_lge_msm8992
G4 common device tree: https://github.com/LineageOS/android_device_lge_g4-common
Proprietary files: https://github.com/TheMuppets/proprietary_vendor_lge
.
XDA:DevDB Information
lineage-13.0-unofficial, ROM for the LG G4
Contributors
steadfasterX, codeworkx, genesixxbf3
Source Code: https://github.com/steadfasterX/los_android_device_lge_h815
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Bootloader unlocked, v20A (or greater) bootloader stack
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2017-08-21
Created 2017-08-21
Last Updated 2017-11-03
FAQ
1. Q: Encryption is not possible?
A: if the GUI for encrypting the device is not working:
Its highly recommended to backup all your data including the internal storage (I recommend FlashFire or / and Titanium)
Flash my screenlock fix (search here at XDA) in TWRP.
Reboot to android.
ensure that you met all usual requirements (battery, screen lock set) and then open a terminal or adb shell. Type:
vdc cryptfs enablecrypto inplace pin 1234
Replace 1234 with your desired pin ofc.
sfX
Reserved
Hi steadfasterX !
Thanks for keeping this alive ! I'm still on an old 13.0 version, it runs fine ATM.
steadfasterX said:
the kernel has security bugs which need to be addressed
Click to expand...
Click to collapse
Could you please be more precise on this ?
Where those bugs also in genesixx build, or are they specific to your build ?
Are these bugs LOS specific, or are they AOSP related ?
Thanks !
thewild said:
Hi steadfasterX !
Thanks for keeping this alive ! I'm still on an old 13.0 version, it runs fine ATM.
Could you please be more precise on this ?
Where those bugs also in genesixx build, or are they specific to your build ?
Are these bugs LOS specific, or are they AOSP related ?
Thanks !
Click to expand...
Click to collapse
its the same source then the official build (and so genessix) used so it should work the same way but as my device is broken atm and I await repair I cannot test it..
Last time I checked the security patches in my build got increased to July 2017 where the latest official ones had June..
so afaik there should be no critical issues in Android but the kernel is last time updated in May 2016 (should be the same for genessix builds).
My plan is maybe to integrate the Llama kernel and backport fixes from the 14.x tree.
don't expect that this happen in the near future (we can hope though) because atm I'm quite busy with my unofficial unlock stuff.
.
OK I'll keep an eye on this thread then.
Good luck !
Any tester reports?
Netsab said:
Any tester reports?
Click to expand...
Click to collapse
Yes.. I use that ROM with my unofficial unlock testers. Atm I cannot test cell service but it boots up fine, WiFi, cam etc works fine.
sfX
Sent from my LG-H815 using XDA Labs
Hi,
I can't make encryption work.
Can you write a procedure to use it with this ROM, please?
What I did:
- Install TWRP latest version
- Install latest nightly
- Remove gate keeper (using this)
- Launch encryption
What happened:
- Device reboot, display a green android on a black screen for a second, then reboot again try to boot on LineageOS but it froze after maybe a minute.
- I put off the battery and reboot the phone, that boot normally (data not encrypted but not corrupted either).
Thanks by advance
zeduck said:
Hi,
I can't make encryption work.
Can you write a procedure to use it with this ROM, please?
What I did:
- Install TWRP latest version
- Install latest nightly
- Remove gate keeper (using this)
- Launch encryption
What happened:
- Device reboot, display a green android on a black screen for a second, then reboot again try to boot on LineageOS but it froze after maybe a minute.
- I put off the battery and reboot the phone, that boot normally (data not encrypted but not corrupted either).
Thanks by advance
Click to expand...
Click to collapse
thx for testing..
yea I rem that there was a "trick" .. Could you try this build pls: http://droid.binbash.it:58885/h815/lineage-13.0-20170912-UNOFFICIAL-h815.zip
It includes an insecure kernel which will allow to debug.
Factory Reset in TWRP
Flash in TWRP
Boot Android
Enable encryption
when it reboots open a terminal and type (linux or FWUL): while true; do adb logcat ;done
on windows ensure that once the logcat aborts that you restart it immediately again!! and use just adb logcat
if using windows or linux: ensure the terminal buffer is big enough bc thats a a lot to handle.. (go into the settings of the cmd or terminal and set it to a very high value. e.g. 5000000)
let it bootloop and boot into Android again (logcat should run all the time)
CTRL+C when its completed with the above
copy & paste the whole stuff in a text file and attach it here
sfX
Are there any special modifications that would make it work?
Because I use this ROM as a daily driver and I would appreciate not to backup and reflash several times
If not, I will take the time to test this weekend.
zeduck said:
Are there any special modifications that would make it work?
Because I use this ROM as a daily driver and I would appreciate not to backup and reflash several times
If not, I will take the time to test this weekend.
Click to expand...
Click to collapse
without logs I cannot say anything for sure...
It may can be solved by just typing the encrypt command over adb or it requires to modify the ROM..
If you like you can try the following but keep in mind that having a complete Backup is a good idea always and when I say complete I mean including internal storage which is not be backuped by TWRP!! Use e.g FlashFire app to accomplish this. I would take a TWRP backup for all (use my latest beta!!!) and then FlashFire to backup internal storage.
Encryption often fails to a wrong formatted data partition so this can be a reason as well.
Try this:
Backup as described above
In TWRP select wipe - advanced - press "Format data" button to format the data partition
Boot android
set a pin or password for the lock screen!
Encrypt
If succeeded restore backup with FlashFire
As always there is a risk and it requires some time so I would not recommend to do this on a busy day.. as you say at the weekend fe.
Then we can try to use the adb commands and if that doesn't work as well the logcat..
sfX
Sent from my LG-H815 using XDA Labs
Hi !
I gave a try with lineage-13.0-20170918-UNOFFICIAL-h815.zip that I dirty-flashed over my previous lineage-13.0-20170204-UNOFFICIAL-h815 version.
Everything went fine (I had to replace the su zip/app though), except that satellite location would not work (network location was fine) : I kept getting
Code:
QCOM PowerHAL : Failed to acquire lock.
in logcat.
I'll give another try with the latest lineage-13.0-20170927-UNOFFICIAL-h815.zip.
If that fails too, I guess I'll have to clean-flash it then.
EDIT :
Bad news : after a clean flash, I keep getting
Code:
QCOM PowerHAL : Failed to acquire lock.
in logcat.
No GPS?! Kind of annoying bug... I'm still in 20170608 build and that news don't make me want to updated. I use GPS everyday, so this is very annoying
Netsab said:
No GPS?! Kind of annoying bug... I'm still in 20170608 build and that news don't make me want to updated. I use GPS everyday, so this is very annoying
Click to expand...
Click to collapse
After flashing several successive versions of that ROM, I discovered that version lineage-13.0-20170813-UNOFFICIAL-h815.zip seems to be the last one with satellite location working fine.
Starting from lineage-13.0-20170814-UNOFFICIAL-h815.zip, satellite location stops working. I guess something is broken in that build.
@steadfasterX :
Can you look and see what's happened with 20170814 ? Thanks !
@Netsab :
You can safely upgrade to 20170813.
breversa said:
After flashing several successive versions of that ROM, I discovered that version lineage-13.0-20170813-UNOFFICIAL-h815.zip seems to be the last one with satellite location working fine.
Starting from lineage-13.0-20170814-UNOFFICIAL-h815.zip, satellite location stops working. I guess something is broken in that build.
@steadfasterX :
Can you look and see what's happened with 20170814 ? Thanks !
@Netsab :
You can safely upgrade to 20170813.
Click to expand...
Click to collapse
Thanks you, I'll try.
breversa said:
After flashing several successive versions of that ROM, I discovered that version lineage-13.0-20170813-UNOFFICIAL-h815.zip seems to be the last one with satellite location working fine.
Starting from lineage-13.0-20170814-UNOFFICIAL-h815.zip, satellite location stops working. I guess something is broken in that build.
@steadfasterX :
Can you look and see what's happened with 20170814 ? Thanks !
@Netsab :
You can safely upgrade to 20170813.
Click to expand...
Click to collapse
thanks for your report. btw a dmesg is very helpful in these cases but the above should be fixed on next build.
next build will also have all proprietary stuff upgraded to v20p.
sfX
EDIT
new build is up
.
Hey sfX,
When trying to dirty-flash 20170930 over 20170813, the phone gets stuck on the boot animation (for over 30 minutes).
I did not try to clean-flash it though ; I thought I'd let you know first.
Sir SteadfasterX!
I use Unofficial 13.0-20170625-UNOFFICIAL-h815 as a daily driver and it never crashed once. I will try yours in near future, beginning with a dirty flash (but with a backup in case).
My question is, do the Bluetooth APT-X include in this rom?
One of my other phones Sony Z5 (modded stock) includes from factory an APT-X notifier, whenever it connects to a Bluetooth with APT-X I get a toast message that the device using "BLUETOOTH apt-x".
I see in Nougat 7 that it is possible to check in "developer mode" which Bluetooth protocol that currently is in use.
[Request] It would be nice if you could pick Bluetooth APT-X drivers/codec from above version of LinageOS14
Thank you very much!
I have attached the spoken AptxNotifier.APK from Sony z5 Marshmallow
datorprofessor said:
Sir SteadfasterX!
I use Unofficial 13.0-20170625-UNOFFICAIL-h815 as a daily driver and it never crashed once. I will try yours in near future, beginning with a dirty flash (but with a backup in case).
My question is, do the Bluetooth APT-X include in this rom?
One of my other phones Sony Z5 (modded stock) includes from factory an APT-X notifier, whenever it connects to a Bluetooth with APT-X I get a toast message that the device using "BLUETOOTH apt-x".
I see in Nougat 7 that it is possible to check in "developer mode" which Bluetooth protocol that currently is in use.
[Request] It would be nice if you could pick Bluetooth APT-X drivers/codec from above version of LinageOS14
Thank you very much!
I have attached the spoken AptxNotifier.APK from Sony z5 Marshmallow
Click to expand...
Click to collapse
Better wait until I fixed the current nightlies..
nice app btw. when all is fixed i may take a look into it
Sent from my LG-H815 using XDA Labs
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree source code: https://github.com/Inkypen79/device_xiaomi_andromeda
Kernel source code: https://github.com/Inkypen79/kernel_xiaomi_andromeda
Working:
Almost everything
Broken:
You tell me
Compatibility:
This is for Mi Mix 3 5G (andromeda) only. Not compatible with regular Mix 3 (perseus)
Downloads:
https://sourceforge.net/projects/xiaomi-andromeda/files/
Installation:
Reboot to recovery
Wipe /system, /vendor, /data and /cache
Install LineageOS zip package
Install [optional] a Google Apps package of your choice (Open GApps is advisable, but stock and super variants are not recommended!!!)
Important notes:
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
XDA:DevDB Information
LineageOS, ROM for the Xiaomi Mi Mix 3
Contributors
Inkypen
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Testing
Created 2020-06-08
Last Updated 2020-06-08
Additional installation instructions if coming from stock MIUI:
In order to install a custom ROM you must have an unlocked bootloader. You can apply for this at Xiaomi's official site: https://en.miui.com/unlock/
You then need to install a custom recovery. Official TWRP builds are available, and the official maintainer has a thread with installation instructions here: https://forum.xda-developers.com/mi...covery-unofficial-twrp-xiaomi-mi-mix-t3941867
Once you have TWRP installed, boot into recovery mode. Wipe cache,dalvik,system,vendor partitions.
You are strongly advised to flash the latest modem firmware. You can grab that here: https://sourceforge.net/projects/xiaomi-andromeda/files/firmware.zip/download
WARNING: You will lose all saved files on your internal storage in the next step, make a backup of important files before proceeding
Data partition must be formatted (not wiped) to remove forced encryption. Use the bottom right "Format Data" button in the Wipe menu. You will be asked to type "yes" to confirm your choice.
At this point your internal storage will be empty. Copy the ROM from your PC to the phone, click install in TWRP and select the ROM. If you wish to install gapps/nanodroid, copy it to the phone and install after the ROM. Once you have flashed the ROM and any add ons, you must format internal storage again. Internal storage must be completely empty for the very first custom ROM boot, once a custom ROM has been installed and you want to swap to a different one, further formatting is not necessary.
Reboot back to system and enjoy custom ROM goodness
Reserved
Thanks, been waiting for this. Will test it out
Just switched to this one because Xiaomi probably won't ever release Q for andromeda. Working great so far!
Can you flash modem via twrp or do I need to use Odin?
Arcticsoldier said:
Can you flash modem via twrp or do I need to use Odin?
Click to expand...
Click to collapse
twrp
pm4rcin said:
1. After some trouble with installing (first time so...) system works fine but when I plug my usbc-jack adapter and headphones it doesn't see them. How can I fix that?
2. Another thing is no 4k option in camera app for recording.
PS. Thanks for your work delivering that ROM.
Click to expand...
Click to collapse
I got no problem with headphones here.
Stock LineageOS Snap camera can't do 60fps or 4k recording. There are plenty of camera apps on the play store that have these options.
If you want to use GCam then this port is the most compatible with andromeda, it can do 1080p/60fps and 4k/30fps video recording. https://f.celsoazevedo.com/file/cfiles/gcm1/GCam_7.3.018_Urnyx05-v1.9.apk
This GCam port does not work with selfie camera at all, you must use the built in Snap cam for that. My suggestion would be to set the slider to open the default camera app and to have have GCam on your home screen.
Phone is not rooted, but many apps do not work because they think its rooted. I.E. Revolut, banking apps, Outlook, Teams. Is there an workaround for this?
flori.one said:
Phone is not rooted, but many apps do not work because they think its rooted. I.E. Revolut, banking apps, Outlook, Teams. Is there an workaround for this?
Click to expand...
Click to collapse
This problem with false positives happens on stock ROMs as well. When I owned a Zuk Z1, loads of apps thought the stock ZUI was a rooted custom ROM. Not a lot can be done about it because each app uses it's own detection method and the companies that make these apps obviously aren't going to broadcast the detection methods they use.
You may have success running these apps by actually rooting your phone and using Magisk Hide on the apps that don't work.
It's the first time I install a non-official Lineage ROM and I've found that both SELinux and device encryption are disabled. I also got a notification saying this was due to the ROM being built with public keys?
I don't know if this is normal and if there's something I can do to enable SELinux and searching for solutions hasn't returned any
Also, what's the keys thing about?
Thanks for your efforts!
Groctel said:
It's the first time I install a non-official Lineage ROM and I've found that both SELinux and device encryption are disabled. I also got a notification saying this was due to the ROM being built with public keys?
I don't know if this is normal and if there's something I can do to enable SELinux and searching for solutions hasn't returned any
Also, what's the keys thing about?
Thanks for your efforts!
Click to expand...
Click to collapse
I'm not on the LineageOS team so I don't have access to their build system or their private keys, hence the warning about public keys. If you really want encryption it is possible but would involve formatting your data partition again and losing all your files. Writing SELinux policy is a bigger task than porting the ROM and I'm only one guy working alone in his free time. If you try to force SELinux to enforcing mode it's quite likely the ROM won't even boot.
If you're worried about a security risk, considering you have unlocked your boot loader and installed an unknown firmware from a random person on the internet, I would say you have already made a decision concerning your phone's security. All my source code is linked in the first post, so feel free to look it over to make sure I'm not doing anything shady
Inkypen said:
I'm not on the LineageOS team so I don't have access to their build system or their private keys, hence the warning about public keys. If you really want encryption it is possible but would involve formatting your data partition again and losing all your files. Writing SELinux policy is a bigger task than porting the ROM and I'm only one guy working alone in his free time. If you try to force SELinux to enforcing mode it's quite likely the ROM won't even boot.
If you're worried about a security risk, considering you have unlocked your boot loader and installed an unknown firmware from a random person on the internet, I would say you have already made a decision concerning your phone's security. All my source code is linked in the first post, so feel free to look it over to make sure I'm not doing anything shady
Click to expand...
Click to collapse
Well, I've never read a better argument for security! I'll try to learn about writing a SELinux policy and will PR you if I can get it to work in my own device. Once again, thank you very much for your contribution!
Hello
Great Job. Hope you could be merged soon in Official build, they announce a relaxed form in order to submit devices BTW.
Also, i'm trying to get encryption working and i'm stuck.
Like my old phone, after a fresh install a go to encrypt my phone.
I have a little droid during few seconds and a reboot (without progressing bar, a classic boot).
After checks phones still unencrypted.
Just for my reminder here are the steps:
- Flash MIUI EEA
- Boot MIUI
- Fastboot > flash TWRP
- Reboot Recovery
- Wipe Cache, System, Vendor, Data
- Install firmware
- Format Data
- Install lineage
Is it correct ?
kikadisa said:
Hello
Great Job. Hope you could be merged soon in Official build, they announce a relaxed form in order to submit devices BTW.
Also, i'm trying to get encryption working and i'm stuck.
Like my old phone, after a fresh install a go to encrypt my phone.
I have a little droid during few seconds and a reboot (without progressing bar, a classic boot).
After checks phones still unencrypted.
Just for my reminder here are the steps:
- Flash MIUI EEA
- Boot MIUI
- Fastboot > flash TWRP
- Reboot Recovery
- Wipe Cache, System, Vendor, Data
- Install firmware
- Format Data
- Install lineage
Is it correct ?
Click to expand...
Click to collapse
I have testing builds with encryption enabled. The good news is the next update will have encryption enabled, bad news is you'll have to format data partition again to get it working.
The LineageOS team have added in Qualcomm's Bluetooth stack so I've uploaded a new build. You probably won't notice any changes because these are "under the hood" improvements, but if you have some high end headphones you may hear a difference!
Also this build and all future builds have encryption enabled. Unfortunately this means you will need to format your data partition in order to install this build, but this is a one time only thing. I can also confirm that F2FS is working perfectly with encryption if you wish to change filesystems. I can also confirm you can switch to a different ROM without formatting (just the usual wipes) so long as the new ROM you are installing is also encrypted. This change might mean that you can come straight from MIUI without formatting but this is completely untested by me.
Here's the link, and remember you MUST format internal storage if you are on an unencrypted build:
https://sourceforge.net/projects/xi....1-20200630-UNOFFICIAL-andromeda.zip/download
I have tried to flash after format data partition, but I had a bootloop. I was forced to do a clean install after that. I don't know why, but it's working now.
Thanks for your work
Hello, does 5G work on this custom rom?
karolwojak said:
Hello, does 5G work on this custom rom?
Click to expand...
Click to collapse
yes it does
I really need to record conversations or have. I would love to try it out if it had this function
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS 18.1 is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
We have progressed to LineageOS 18.1
Flash instructions :
Use latest pbr recovery for miatol, supports decryption - beta available here, https://pitchblackrecovery.com/joyeuse/.
DO NOT - Wipe data!, ONLY FORMAT, otherwise you may hose the phone.
There is a way to fix this without the fastboot factory clean, flash and lock with the official Xiaomi tool, which was forcing you to clean and lock... now available here: https://github.com/Szaki/XiaomiADBFastbootTools
If you hose the phone, use this tool - you need to install JRE though, as the tool is Java base. Put your phone is fastboot, use the tool to download the latest global rom (or whichever). Then go to where its downloaded, extract the .xy/tar file, then go back into the tool and under "image" select the folder INSIDE the folder you just extracted, then select "clean install" and install it. This will flash the majority of imgs but will error out at the end and be unable to create the "user data" partition.
That's okay, because all of the partitions will be setup again, and you can flash any rom you want again. So when its done, and still in fastboot, fastboot flash recovery recovery.img (recovery.img being the latest joyeuse pbr recovery, you renamed to recovery.img and were in that folder in the command prompt, so it will flash that recovery) or use the tool to select that recovery and it will flash it for you and reboot into for you if you like.
(Do this step last, after Magisk, if you want to unencrypt, no worries if you don't unencrypt - PBR recovery will decrypt your data ON THE SECOND TRY OF ENTERING YOUR SCREENLOCK PIN NUMBER...), the new PBR Miatol Beta 10/14/20, fixes this issue, it is now decrypted on the first entry of the phone's lockscreen PIN. Then flash disable_dm-verity_forceencrypt.zip available here for those who want decrypted data partition: https://zackptg5.com/android.php#disverfe and other places as well.
If you are encrypted and decide to unencrypt later, you will need to flash the disable_dm-verity_forceencrypt.zip in miatol recovery, then format data. Store roms, gapps, recoveries (just in case), disable_dm-verity, magisk install and uninstall and all that stuff on the SD card, so you can use them in PBR after you format DATA (the first step after installing PBR miatol recovery), just FYI. Then do the following:
Flash ROM
Flash OpenGAPPS for android 11 nano
Boot into android, make sure its working and install Magisk Manager 8.0.7, then reboot into recovery and install Magisk 21.4 (in recovery, I did not need to extract the boot.img and patch in Magisk Manager, and reboot into recovery to flash the patched boot.img, but your results may be different): https://github.com/topjohnwu/Magisk/releases. If you want to unencrypt (no guarantees its permanent though) you need to format data, THEN FLASH MAGISK, then flash disable_dm-verity (always the last step)- I usually wipe dalvik and cache too.
USE LATEST MIATOL PBR RECOVERY, PLEASE.
SD card issues resolved with the implementation of the EXFat android driver.
Source Code: https://github.com/LineageOS
Kernel Source: https://github.com/Redmi-SM6250 or Stock kernel from Miui
Apologies for the lack of updates, was diagnosed with stage 4 metastatic cancer and this project was not on my priority list anymore...
Update 28/1/21:
Release notes:
LineageOS
Device: Unified (Miatoll)
Developers: ScaryMen1325 & Loptr4
ROM Version: 18.1
Android Version: Android 11
Build date: 22/01/2021
Status: UNOFFICIAL
Changelog:
• Fixed power related issues
• Added useful apps (thanks to Dev: Emulond for that)
• Other fixes and performance improvements
Notes:
• It's 2nd test version, if you found bugs, give log.
• Using loki kernel by default, haven't tested custom kernel.
Download here:
https://drive.google.com/file/d/1M5-cRBfrRdBdNYGzy5G9bOa1Ncf5JkE4/view?usp=sharing
Please note this is a unified release, you should do a clean install unless you're coming from a unified ROM alreadyl.
Will keep you more regularly updated now that I'm out of the hospital....
Perfect will try tonight
Belpek said:
Perfect will try tonight
Click to expand...
Click to collapse
Have you tried it?
How is it? Good for daily?
There are so many Joyeuse LineageOS ROMs I don't even know where to start.
i don't see you mentioned mobile network in bugs section; does it work? i'll try this rom in a couple hours
Tell me please. If phone will be locked with black screen and i say "ok google". Will it work? Or it will work only if screen is unlocked?
sorry if its not much, since i can't do much on this rom. flashed nikogapps, google sign-in succeded but it seems that i cant install anything from play store.
(dumb me forgot to screenshot, it only says "something went wrong" when i try to install an app from play store)
about ok google from lockscreen/screen off, i tried it, also not working. can't confirm about volte since volte still relatively new here and hasn't developed that much.
Why nikgapps? Open gapps nano is recommended.
Sent from my Redmi Note 9 Pro using Tapatalk
Flash it and using it by now, so far so good, sometimes it gets a little freeze but nothing serious, miracast reboots phone so dunno if this is a bug or not, proximity sensor is another one cuz while I was in speaking with my pal screen was on all the time and my ear activated bluetooth and DND
Have nothing to talk about VoLTE cuz in my country is not available.
ANX modules left my phone in bootloop so instead I went for GCam. Flash unofficial opengapps nano and make sure to use Wi-Fi to complete the first run.
Magisk canary works so it can be rooted.
Keep the hard work!
*Sorry if I made some writing mistakes, english is not my native language. Cheers!!
Tried flashing the latest build (02.10.20) using the latest TWRP from the thread you linked but I get the "can't install package over new build" error. Is it required to come from stock miui?
gigahurts said:
...
Newer Build:
https://mega.nz/file/PlkgiSzS#C_tIspgbtGDrweztQ83lADHyEQf4dTkIUiSAqgjVAFk
NOTE: You should be on 11.0.7.0 QJZMIXM (EU) Global firmware for this build. Also, I have a newer build, but its not ready for primetime and has issues with SMS and Call Log enabling permissions.
Oh, and BTW, if you hose your ROM/Phone, just flash vbmeta.img in fastboot to avoid using the factory fastboot img flash, otherwise you many need to wait another 7 days to unlock the bootloader.
...
The dev for this build is: @wight554, all thanks and credit go to him, he is awesome, and I, for one, seriously appreciate this ROM as it works very well for me. It is so snappy and smooth, with a super fast boot time, no reboots and generally pretty frickin AWESOME!
...
Click to expand...
Click to collapse
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Swiftor said:
First of all, thank you guys @gigahurts & @wight554 very much for working on supporting this device :good::good:
Could you pretty please confirm that you intend to continue working on this and maintain this device? I am planning to buy two joyeuse devices for daily usage and I would like to be at least partially sure I can run LineageOS on them. Also do you think the current known issues will be possible to resolve in the near-ish future? :fingers-crossed: Thanks for your reply in advance. All the best.
Click to expand...
Click to collapse
hey Swiftor,
We will continue to work on this rom. LineageOS has been around a long time, development has spread across so many devices, however, the hardware of many devices is very similar, so support will continue. The last Redmi Note 8 pro, had a mediatek SOC, and made development difficult until MIUI decided to release its source. The snapdragon platform is very mature and is more easily and readily available to develop roms for. Redmi Note 10 pro has been released in India, and has a slightly better processor 765g vs 730g, but the kernel and hardware are very similar, so I development for this phone and the Note 10 pro should parallel and continue. We are working on submitting an official 18.0 release, but have to have all hardware (and software) fully functional and as close to zero bugs as possible. I predict development to continue as long as Xiaomi continues to release new MIUI roms for this device (and they continue to release roms for phones much, much older than this).
I have updated the first post with a newer release. Let me know if you have any issues and I will try to help.
Thanks for the props too
does magisk 21 work on the latest build? really excited for android 11
So this will not be compatible with curtana devices?
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.??
everything is working perfectly and its showing charging rapidly , it was on 88% and showing 10 minutes until full
everything is completely smooth gonna keep it for my daily use
Bantryred said:
Thanks to all developers for this rom. Installed on Curtana with Magisk canary, I had to use Magisk props to pass safetynet. All seems to be working ok.
Click to expand...
Click to collapse
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
there're few thing that you need to fix @gigahurts
1) you putting wrong kernel source. its should be this link
2) why would you mirror it when you can get it in his sourceforge
Why is today's build 590MB while all others are 1.1GB?
pwnaz said:
hi! wich props do u use for fingerprint? i can't pass safety on my joyeuse
Click to expand...
Click to collapse
Sorry for the delay, Im on Curtana so dont know if it makes a difference, but I used no. 16 - mi 10 Global(11)
I also had to hide Magisk Manager
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is a free, community built, aftermarket firmware distribution of Android 10, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Introduction:
This is the unofficial Lineage OS thread for the Motorola Edge, codename racer.
We support all the T-Mobile, International, and Project Fi variants, as their bootloaders are unlockable, while we can't support the Verizon and AT&T variants, as their bootloaders are permanently locked.
How to install:
Boot the newest lineage recovery .img from the Link (or use TWRP).
IF YOU ARE COMING FROM STOCK AND WANT TO INSTALL CUSTOM ROMS FOR FIRST TIME, INSTALL "Copy Partitions Zip" FROM POST #2
In Recovery, click "Format Data".
ADB sideload the newest weekly
Click "Reboot, then choose "Recovery", this will boot you to either Lineage Recovery or TWRP depending on your choice to install TWRP or not. It is necessary to reboot between ROM flash and GApps/Addon flash due to verity/slot-swap logic.
(Optionally) Flash GApps - MindTheGApps arm64 are recommended, OpenGApps are compatible with A/B as of 09102018, but I still only recommend and support MindTheGApps.
Reboot
Download:
Racer Builds
Screenshots:
XDA:DevDB Information
Lineage OS 17.1, ROM for the Motorola Edge
Contributors
erfanoabdi, @SyberHexen, @Jleeblanch, Lineage Team
Source Code: https://github.com/LineageOS & https://github.com/moto-sm7250
ROM OS Version: 10.x Oreo
ROM Kernel: Linux 4.19
ROM Firmware Required: Official Android 10
Version Information
Status: Stable
Reserved
Once i'll have the chance i'll try on my Moto Edge
I was literally gonna learn how to build my own ROM, but this is awesome!
Hey guys, is there anything not working or buggy with this build? I mean no disrespect, but need to know if I can use this as a daily driver.
Also, I have an unbranded (at least with regards to cellular providers) Motorola Edge XT2063-2 I bought from Best Buy unlocked. This should work with that, right?
erfanoabdi said:
Reserved
Click to expand...
Click to collapse
As ALWAYS, Thanks For YOUR Hard work Kid.....
Tef
*edit*
Thanks to everyone!
I have successful flashed it on my amazon unlocked version. only issue I faced was with phones display not turning on due to sensor or something, disabled ambient gestures and always on and haven't faced the problem again . I have also update the adreno Opengl/Vulkan drivers by flashing zip from another post
I have been unable to find twrp but lineage recovery worked fine.
Ezekiel_devoid said:
I have successful flashed it on my amazon unlocked version. only issue I faced was with phones display not turning on due to sensor or something, disabled ambient gestures and always on and haven't faced the problem again . I have also update the adreno Opengl/Vulkan drivers by flashing zip from another post
I have been unable to find twrp but lineage recovery worked fine.
Click to expand...
Click to collapse
Check yo PMa
Has anybody made at least an unofficial TWRP for this phone? I see the Edge+ has had a TWRP for the longest time that was built with the source from THIS phone... anybody??
ToolBoyNIN said:
Has anybody made at least an unofficial TWRP for this phone? I see the Edge+ has had a TWRP for the longest time that was built with the source from THIS phone... anybody??
Click to expand...
Click to collapse
Yes, we are still in testing with TWRP 3.5.0 img but no installer yet, o believe its on his Todo list...
There are 4-5 head Devs working with this device, but why go and build a bunch of 10 ROMs when we are awaiting the first 11 soak to drop any time...
shiboby said:
Hey guys, is there anything not working or buggy with this build? I mean no disrespect, but need to know if I can use this as a daily driver.
Also, I have an unbranded (at least with regards to cellular providers) Motorola Edge XT2063-2 I bought from Best Buy unlocked. This should work with that, right?
Click to expand...
Click to collapse
Absolutely, everything, seems almost flawless. yes, should work on ALL unlocked Edge 5G variants.
I need a better step by step to do this without a computer
Burtandrew8 said:
I need a better step by step to do this without a computer
Click to expand...
Click to collapse
Did u unlock bootloader? gonna need a PC for that at least...
Yeah it's unlocked an rooted
Installing LineageOS via TWRP
Attention! Installation was performed on clean Stock firmware installed in Slot A.
1. Necessary files for installation.
Spoiler
TWRP -3.5.0_10-0 install via fastboot with the command:
fastboot flash recovery twrp-3.5.0_10-0-racer.img
Download and copy to the SDCard:
- archive copy-partitions-20200903_1329.zip to copy from active slot A to inactive slot B the necessary partitions bootloader, logo, etc.
- ROM archive ;
- archive TWRP_Installer
- GApps archive. I made an archive to install GApps based on the installer from FlameGApps. The apps are updated on 01/27/21. The archive contains the following apps:
Spoiler
Android Migrate
Carrier Setup
Config Updater
GMS Core (GMS)
GMS Core Setup
Google Ext Shared
Google Ext Services
Google Services Framework
Google Calendar Sync Adapter
Google Backup Transport
Google Clock
Google Calculator
Google Calendar
Google Contacts
Google Contacts Sync Adapter
Google Dialer
Google Chrome
Google Keyboard
Google Mail
Google Messages
Google Package Installer
Google Restore
Google Search with Assistant
Google Web View
Device Health Services
Device Personalization Services
Digital Wellbeing
Phonesky (Google Play Store)
Setup Wizard
- Magisk-disable-dm-verity-v21.4 Special Magisk installer for Motorola devices.
2. Installation instructions
Spoiler
1. Install TWRP and boot the phone into it.
2. Go to "Install" section and install sequentially:
- copy-partitions-20200903_1329.zip archive;
- LineageOS 17.1 archive;
- TWRP_Installer archive.
3. Go to "Reboot" section, choose "Recovery". The phone will reboot back to TWRP. Now if we go to "Reboot" we will see that the device is in Slot B.
4. Go to "Install" and install the Google App archive.
5. Go to "Wipe" and do "Format Data".
6. Reboot into the system to the language selection menu and then reboot back to TWRP.
7. Go to the "Install" section and install the Magisk installer archive.
8. Reboot into the system.
Great work. can't wait for LineageOS coming to the Edge+.... desperately waiting.
Ezekiel_devoid said:
I have successful flashed it on my amazon unlocked version. only issue I faced was with phones display not turning on due to sensor or something, disabled ambient gestures and always on and haven't faced the problem again . I have also update the adreno Opengl/Vulkan drivers by flashing zip from another post
I have been unable to find twrp but lineage recovery worked fine.
Click to expand...
Click to collapse
I had the same problem about an hr ago
*edit*
I been on 013121 Build for about (3) days now. Cant get the dam device to wake up for the life of me. Phone Call? Yea, screw that, gotta hold in power and reboot to have the dam thing awaken....
Anyway to do this without computer
I updated Mode FlameGApps to the base of 03.02.2021
Added PixelLauncher, disabled removal of SnapCamera and other camera apps.
371.78 MB file on MEGA
mega.nz
The last posts in this thread have been edited/deleted. I take this opportunity to remember where you can read the forum rules
After reading the rules and even though you think something is against it, you should use the report button instead of create spam topics that bring nothing of value to our community.
Thank you!
FSadino