I am quite sure this is the most efficient way of making paperweights, but will one golden percentage of installation progress bar work?
Related
Hello EveryOne,
I have Imate PDA2K and any one who is going to solve my following two issues i will pay him $5 as a gift from me by PayPal.
The problems are:
1. When ever i remove the battery of my phone to change the sim card the time and date changes to the default time and date something like the manufature date. I try to upgrade the rom to wm5, then wm6 but nothing help. Even the backup battery is showing 100% full all the time.
2. When ever i try to call i press the answer button but the call don't connects. Some times connects and some time i have to try hundreds of time to connect my call. Same thing is for the recieving the call. Some time it connects and sometimes it hangs during answering the call.
I will really pay $5 who will help me to sort out these problems. I buy this device as pre-owned device that's why not able to get help at clubimate.com and hence plan to get help here and pay a part of pre-owned fee to someone here.
Thank you,
1.) it's a backup battery problem, change the backup battery.
eventhough it says 100% doesnt mean it's not failing.
the backup battery is charging from your main battery.
it may show 100% but easy recharged when you put the main battery.
if it is easily recharged... it will easily discharge... hence, flat batt.
2.) i dont know this but it maybe related to main battery failing to give power to the phone module. i had a BA with no service /and/ talks disconnection once but when i changed to a new battery it was gone.
SilverSamurai said:
1.) it's a backup battery problem, change the backup battery.
eventhough it says 100% doesnt mean it's not failing.
the backup battery is charging from your main battery.
it may show 100% but easy recharged when you put the main battery.
if it is easily recharged... it will easily discharge... hence, flat batt.
2.) i dont know this but it maybe related to main battery failing to give power to the phone module. i had a BA with no service /and/ talks disconnection once but when i changed to a new battery it was gone.
Click to expand...
Click to collapse
Thanx for your response...
1. Can backup battery easily changable i mean is it like a big battery like we have in our pc motherboards or a special service center have to change it?
2. Let me change the baterry today and see what happens.
no prob... just add your reward to your battery procurement.
and i hope that works...
What else may be?
mustking said:
Thanx for your response...
1. Can backup battery easily changable i mean is it like a big battery like we have in our pc motherboards or a special service center have to change it?
2. Let me change the baterry today and see what happens.
Click to expand...
Click to collapse
I have changed the battery today and it done the same call answering problem just one time in over 20 calls before this ratio was 99% of 100% times.
What else may be creating this problem of hanging mobile during recieving the call. And also please tell me which rom of wm6 is best you think i will use?
install 2003se rom back, if u hv 2005.
try xplode's latest cook. it's in the WM6 thread of BA
The rom does not matter (well mine is a lil quicker than others but)
1. Simple SIM change procedure - press power, wait 10-20 sec. , then remove the battery and change the sim. after powering on hit reset once (or you will get no radio) - this way the date will not reset
2. Phone LAG - this problem occures when a lot of memory and cpu power is used for the OS, then the phone starts to lag. Here is a simple tweak which will speed up the phone app - press Start => Settings => Sounds & Notifications , remove the check for Events (warnings, system events)
there are a lot of tweaks which will speed up overall performance of the phone, but you need to search the forums for them
And remember, the phone app is the same for all WM5/6 devices so the tweaks are the same, you can look in other devices forums for tweaks
Thnx Every One!
Hello,
Thank you every one for your replies.
I changed the battery and currently checking it to make sure the problems got solve out.
Hi
I have a trinity with the Dopod WM6 Rom installed.
The problem is when it comes from sleep the battery status is not automaticly updated, it takes up to 10 seconds to update the status... This happens almost every time the pda comes from sleep.
Is it normal???
Yes that's normal...
Battery status is not immediately available upon wake-up, and the display of the battery percentage is refreshed only x seconds. Together, this makes for a little delay...
thanks for quick reply
I thought it was hardwre related, so i was thinking it could be a problem with my device...
Glad it's not, but it is rather anoyng, that is why i don't use the status bar on the top bar... every time i turn on the lcd of the device it shows batery status unknown, or something like that!
I have an odd issue. I am running the stock ATT rom until I can get the stupid phone to take the HardSPL (different issue being worked on).
The icon at the top shows the battery at full capacitiy all the time. I have Phone alarm on and it has a battery indicator that shows it as low as 20% while battery icon is still 4 bars full. Also there are times when I remove it from the usb and the charging icon stays on instead of showing the battery icon. If I soft reset then it seems to go to normal and the charging icon is replaced by battery which seems to always show full.
I am quickly getting frustrated at this ATT rom. My Kaiser was set up perfectly for my liking and I want to get this to the same point.
I flashed a custom Rom, and it doesn't have the start up battery meter. It's the one, that if you turn your phone completely down, and tap power, it displays this cool little guy. I want to add the battery meter to my Rom. any idea?
http://imgur.com/12gTZxC
Here I have a link to the description that I am talking about.
BoneStock 1.2 has it, and its the best ROM I've seen so far, that's all i can suggest though.
After upgrading to latest 6.0.1 32.2A.0.224 I have notice that I can't tap on battery graph to get more details about screen on or awake and wifi as before is it happen only with me or it is new feature or common bug pls advice
same here probably stamina mode don't allow
but if you click on the the spec like screen will popup a new window with more detail
U r right but how can we renable it?
i think it's impossible, probably the stamina mode integration work in this way
Nothing to do with stamina mode. This is just Sony's own battery graph. Which is a botched up version of the stock one. Just one of the few things wrong with the latest update.
Sent from my iPad using Tapatalk
Guys this is similar to Note 5 battery graph! For some reason you can't click on it to go into details (Screen, charging, wifi, signal, GPS etc...) use graph! Really sad to see sony following that!