[RECOVERY][OFFICIAL][Q-T][picasso] OrangeFox Recovery Project [R11.1_2.2] | Redmi K30 5G / K30i 5G - Redmi K30 5G ROMs, Kernels, Recoveries, & Other D

[RECOVERY][OFFICIAL][Q-T][picasso] OrangeFox Recovery Project [R11.1_2.2] | Redmi K30 5G / K30i 5G - Redmi K30 5G ROMs, Kernels, Recoveries, & Other D

OrangeFox Recovery Project [R11.1]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is partially void.
*
* We're not responsible for bricked devices, dead OTGs,
* thermonuclear wars, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
OrangeFox is FREE SOFTWARE
This recovery supports treble, MIUI and custom ROMs.
* OrangeFox version: R11.1
* Device codename: picasso
* Maintainer/authors build: masemoel
* OrangeFox source: GitLab
* Device tree: GitLab
Downloads
* Official OrangeFox builds here
NOTE: bear in mind that there is no build cicle. OrangeFox will be updated when it's needed.
This recovery is compatible with Redmi K30 5G, K30i 5G and K30 5G Racing editions.
Increase my motivation: PayPal
Donations to OFRP: Open Collective (they deserve as well!)
Installation
Update from your current recovery/older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to your current custom recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
From fastboot:
1. Download the OrangeFox zip file to your PC.
2. Extract the recovery.img file from the zip.
3. Reboot your phone into fastboot mode.
4. Type the following command in your console (you need adb drivers to do this)
fastboot flash recovery recovery.img
From OFRP app [NEW!]
(Ideal if you don't own a PC)
Official builds can be flashed with the new OrangeFox app. Get it here (needs root access).
How to use OrangeFox recovery
* See the official OrangeFox guides.
* Source changelogs
News
* Stay tunned to my new releases (either test or stable) in my Telegram channel
* Chat with other picasso users in a global Telegram chat
* Follow the news from the OFRP team in their TG channel
Support
* Official OFRP Telegram support group
Bugs
* Check the release bugs and notes in the download page.
TIP: check current issues at the GitHub Issues tracker before reporting one (it may already exists).
Credits
* TeamWin - for TWRP.
* OrangeFox Team - for your hard and brilliant work.
Features
* Updated with latest TWRP changes
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* Flashlight
* Password security.
* Support for MIUI and custom ROMs
* Superb new UI and themes
* OrangeFox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more! Feel free to give a go
Version Information
Status: Stable
Current Stable Version: R11.1_2.2
Stable Release Date: 2023-01-25
Created: 2021-02-02
Last Updated: 2023-01-26

Important note:
Since 2.1 release, decryption is only working with Android 12 and upper. So, my suggestion is:
- Use R11.1_10 release if you are using Android 10 or 11.
- Use the latest release for Android 12, 13 or upper.
All the features left will work fine on all Android versions but if you want to decrypt your internal storage on recovery you must follow the indications from above.

Great WOrk Sir Mase!

New OFRP builds are getting cooked! [A10-A11]
NOTE: Remember that I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.0_1.3:
- Bump to 2021-02-03 OFR codebase, and version tag to R11_1.3.
- Some decryption improvements.
- Fixed OF getting overwritten in MIUI CN.
- Fixed ADB Sideload.
- Fixed assert errors related to building dates.
- Fixed EFS and other partitions that were mounted as read-only — you can backup and restore now in all partitions!
- Fixed some A11 issues with /tmp/install directories.
- Better status bar padding.
- Fixed magiskboot error from previous release.
- Functions that were disabled aren't visible now (such as Aroma Installer or app manager on A11...).
- Fixed some other minor bugs.
- Fixed Splash customization and some other improvements by OFR team.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coofee here
Finally, I hope you enjoy this new, stable and customizable recovery!

masemoel said:
[Reserved]
Click to expand...
Click to collapse
Hi Bro, this recovery, is there bootloop for eu rom after flash magisk or not?
I remember that. On your AICP rom, we have to fix it manually.
Thank you

vudungcom said:
Hi Bro, this recovery, is there bootloop for eu rom after flash magisk or not?
I remember that. On your AICP rom, we have to fix it manually.
Thank you
Click to expand...
Click to collapse
OFR uses the magiskboot tool, which it's supposed to patch the boot images better. However, there is a tiny chance of facing bootloop, so I would make a backup of the boot image, so that you can easily restore again and boot normally if you face any bootloop issue.

New OFRP builds are up! [A10-A11]
NOTE: Remember that I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.0_1.4:
- Bump to 2021-02-19 OFR codebase, and version tag to R11.0_1.4.
- Fixed MTP not working after formatting data and rebooting.
- Fixed fastbootd.
- Full NTFS support (useful for OTG).
- Removed status bar offset.
- Minor improvements.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coofee here
Finally, I hope you enjoy this new, stable and customizable recovery!

Looking forward to that MTP fix. I don't feel safe pushing the files though ADB, sometimes it looks like it works but doesn't.
Lot of thanks to masemoel for his work!

New OF oficial builds are up! [A10-A11]
NOTE: Remember that I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
IMPORTANT NOTE: A10 build from today is UNOFFICIAL and won't receive updates anymore! So R11.0-1.5 is the last stop for android Q.
Changelog R11.0_1.5:
- Bump version tag to R11.0_1.5.
- Add hide notch option.
- Update status bar paddings (almost perfect).
- Add exFAT support.
- Fixed Migrate mounting data error.
- Some decryption improvements by QCOM.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]
Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
Finally, hope you enjoy this first official release!

Incredibly nice! It's amazing that the best recovery for the K30 5G is now official.

New OF official beta build is up! [A11]
NOTE: Remember that I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_1.6:
- Fully fix MTP issues after formatting data.
- Some decryption improvements: attempt to fix decryption on CN ROM.
- Bump to new R11.1 source and version tag to R11.1_1.6.
- Minor additions.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]
Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
Finally, hope you enjoy this new official release!

New OF official stable build is up! [A10+]
NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_1.7:
- First stable R11.1 release for picasso.
- Fixed system_root typo (caused flashing errors in some ROMs).
- Switch totally to twrp-common decryption tree (fixes decryption in stock CN ROM).
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]
Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
Finally, hope you enjoy this first stable official release!

Can I use this recovery on Redmi K30i 5G?

Little Zed said:
Can I use this recovery on Redmi K30i 5G?
Click to expand...
Click to collapse
Yes

New OF official stable build is up! [A10+]
NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_1.8:
- Fixed wrong CPU temp info.
- Fixed all decryption issues with MIUI 12.x CN ROM.
- Enabled backup and flash features to dynamic partitions.
- Bump version tag to R11.1_1.8.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]
Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
Finally, hope you enjoy this new official, stable release!

New OF official stable build is up! [A10-A12]NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_1.9:- Bump version tag to R11.1_1.9.
- Fixed bootloop issues with Android 12.
- Updated prebuilt Magisk zip to 23.0.
- OTA feature is now enabled by default.
- Update to latest R11.1 improvements.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
Finally, this project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
I hope you enjoy this new official, stable release!

Can I flash it to my K30 4G，Is that any problem？

StrangeCat0711 said:
Can I flash it to my K30 4G，Is that any problem？
Click to expand...
Click to collapse
No. Flash the official build for phoenix (Redmi K30/POCO X2)

New OFRP official stable build is up!NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_2.1:- Allow installation of files higher than 4GB.
- Support Android 12 decryption.
- Release based on fox_12.1 source.
- Add EROFS support.
- Other enhancements.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
Finally, this project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
I hope you enjoy this new official, stable and decryptable release!

New OFRP official stable build is up!NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_2.2:- Update prebuilt kernel.
- Hide some low-level partitions for a normal backup (you can still find them on advanced backup!).
- Support decryption for all A13 ROMs, even those which doesn't support wrappedkey (such as SparkOS).
- Fixed CPU temperature always showing 0º.
- Sync with latest source and update to R11.1_2.2 version.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP appOfficial builds can be flashed with the new OrangeFox app. Get it here (needs root access).
Finally, this project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
I hope you enjoy this new official, stable and decryptable release!

Related

[OFFICIAL][RECOVERY][ginkgo/willow] OrangeFox Recovery Project

OrangeFox Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
INSTALLATION:
0. Backup your ROM, your data, your internal storage, and your settings/apps, to an external device
1. Download the OrangeFox zip file to your device
2. Reboot to your custom TWRP-based Recovery
3. Install the OrangeFox zip file as a normal zip
4. The device will automatically reboot into OrangeFox recovery after installation (allow this to happen)
5. Enjoy!
Frequently Asked Questions; Installation from stock recovery; MIUI OTA; Troubleshooting; Sundry Information:
* See
Guides and FAQ: https://wiki.orangefox.tech/en/guides
Setup OTA: https://wiki.orangefox.tech/en/guides/ota
Discussion about MIUI OTA for our device: https://forum.xda-developers.com/redmi-note-8/how-to/guide-flashing-miui-ota-rom-recovery-t4041591
How to report bugs properly: https://wiki.orangefox.tech/en/guides/report#what-you-must-provide
Credits
* TeamWin - for TWRP
* The OrangeFox Team - for your hard work
* mauronofrio - for bring up ginkgo device tree
* All our testers - for your patience and help
Features
Spoiler: Features
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* Built-in Magisk Manager
* Flashlight
* Password, torch, led
* Support for Miui and Custom ROMs
* Superb new UI and themes
* OrangeFox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more!
DOWNLOADS
https://orangefox.download/en/device/ginkgo
Screenshots
See https://files.orangefox.tech/Screenshots/R10/
Contact Us
Telegram: https://t.me/OrangeFoxChat
XDA:DevDB Information
OrangeFox Recovery Project, Tool/Utility for the Redmi Note 8
Contributors
Teguhpunya, DarthJabba9, MrYacha, mauronofrio
Source Code: https://gitlab.com/OrangeFox
Device Tree: https://gitlab.com/OrangeFox/device/ginkgo
Version Information
Status: Stable
Current Stable Version: R11.1
Stable Release Date: 2022-01-01
Current Beta Version: R11.1_1
Beta Release Date: 2021-08-09
Created 2020-03-04
Last Updated 2022-01-01

Changelog
--NEW--
Stable
R11.1 Stable
* Initial R11.1 stable build
* Updated prebuilt kernel
* Fixed stuck on OrangeFox splash screen in some cases
--OLD--
Stable
R11.0_1
* Fixed decryption in Android 11 and some MIUI
* Enabled turn off screen feature
R11.0
* Initial stable R11.0 build
* Manage a new Willow version (commit from mauronofrio)
R10.1_4
* Allow backup Persist image
* Add support for metadata encryption
* Fix status bar padding
* Fix problem with queueing zip for flashing
* Fix some issues related to backup
* Add support for block-based incremental OTA updates in AOSP ROMs that support this
* Fix issue "boot to fastboot" after successfully decrypted data from mount menu
* Update OrangeFox codebase to 2020.05.29
R10.1_3
* Prevent backup error caused by /data/per_boot
* Deal with backup issues relating to Dual-Apps (/data/vendor_ce/999)
* Reduced brightness values to reduce chance to get image retention
* Move status bar up behind notch
R10.1_2
* Updated Magiskboot to 20.2 stable
* Updated DM-verity and forceencrypt disabler (Menu - Gear icon - MIUI OTA - Patch ROM)
* Updated initd addon to anykernel3 version
* Fix languange translations
* many more
R10.1_1
* Initial R10.1 stable build.
* Fixed format partition problem.
* Added support for willow (Not tested).
* Updated magisk to 20.1.
* Enabled Nano editor.
Beta
R11.1_1
* Now supports encryption on all MIUI
Notes:
* Doesn't support Android 11's metadata encryption for now. It will stuck at OrangeFox's splash image
R11.1_0
* Updated to R11.1 ( See Changelogs at https://wiki.orangefox.tech/en/changelog/ )
* Added support for willow hwversion 18.31.0
* Changed max screen brightness
R10.1_4
- Continuation from R10.1_3 Stable
- Add support for metadata encryption (need more test)
- Fix reading device name (ginkgo as willow or vice versa) (need more test)
- Fix status bar padding
- Fix problem with queueing zip for flashing
- Update Magisk to 20.3 in Fox addons
- Update magiskboot
- Update languange translations
- and more…

Reserved

I have a "ginkgo", when I tried to flash the firmware there was an error that said: "E3004: This package is for ginkgo this is a willow" and obviously the package with the firmware was correct.

elfabo88 said:
I have a "ginkgo", when I tried to flash the firmware there was an error that said: "E3004: This package is for ginkgo this is a willow" and obviously the package with the firmware was correct.
Click to expand...
Click to collapse
If you are absolutely sure it's a ginkgo, and you are flashing a ginkgo rom/firmware then in the rom/firmware.zip you can go to META-INF/com/google/android/updater-script->here remove the following line:
Code:
getprop("ro.product.device") == "ginkgo" || abort("E3004: This package is for \"ginkgo\" devices; this is a \"" + getprop("ro.product.device") + "\".");
Now recovery won't verify your device and you can flash the proper rom. Although don't extract your full rom.zip. Just open(not extract) with winrar, go to the mentioned path and extract the updater-script, make changes with notepad++ and drag the new modified updater-script back in the same path.

elfabo88 said:
I have a "ginkgo", when I tried to flash the firmware there was an error that said: "E3004: This package is for ginkgo this is a willow" and obviously the package with the firmware was correct.
Click to expand...
Click to collapse
I have test build to solve that problem (hopefully). If you're interested to be tester, PM me.

Please release that version, same result here...

is this has data encryption issue?
if have what i have to do...

imonshahed said:
is this has data encryption issue?
if have what i have to do...
Click to expand...
Click to collapse
Format data after flash rom

imonshahed said:
is this has data encryption issue?
if have what i have to do...
Click to expand...
Click to collapse
select "disable force encryption" option in orangefox seetings > miui ota everytime you flash rom

Update please
Needs a twrp with metadata

Beta update version R10.1_4
R10.1_4 Beta
Changelog:
- Continuation from R10.1_3 Stable
- Add support for metadata encryption (need more test)
- Fix reading device name (ginkgo as willow or vice versa) (need more test)
- Fix status bar padding
- Fix problem with queueing zip for flashing
- Update Magisk to 20.3 in Fox addons
- Update magiskboot
- Update languange translations
- and more..

Stability on Beta and questions.
Hi there, I just got a RN8 and want to try out this recovery. It seems great and supports MIUI OTA updates.
How stable is the Beta version as compared to the Stable one? Is there any major improvements that I should choose the Beta one over the Stable one or vice versa?
Besides, this should support the MIUI.EU ROMs' OTA updates, right? And is its functionality is the same as TWRP (e.g. anything that TWRP supports, OrangeFox will also support) ?
Thank you!

PorridgePi said:
Hi there, I just got a RN8 and want to try out this recovery. It seems great and supports MIUI OTA updates.
How stable is the Beta version as compared to the Stable one? Is there any major improvements that I should choose the Beta one over the Stable one or vice versa?
Besides, this should support the MIUI.EU ROMs' OTA updates, right? And is its functionality is the same as TWRP (e.g. anything that TWRP supports, OrangeFox will also support) ?
Thank you!
Click to expand...
Click to collapse
This is, basically, TWRP on steroids.
If you know what you're doing, hop on the BETA train, otherwise, stable is the safest choice.
Sent from my Redmi Note 8 using Tapatalk

isamwise said:
This is, basically, TWRP on steroids.
If you know what you're doing, hop on the BETA train, otherwise, stable is the safest choice.
Click to expand...
Click to collapse
Ok thanks. I think I will stay with the stable build then since I'm a newbie at all this flashing stuff. Should I flash TWRP first and then flash OrangeFox from TWRP or flash OrangeFox directly? Is it the same result?

PorridgePi said:
Ok thanks. I think I will stay with the stable build then since I'm a newbie at all this flashing stuff. Should I flash TWRP first and then flash OrangeFox from TWRP or flash OrangeFox directly? Is it the same result?
Click to expand...
Click to collapse
It depends on your method of flashing...
If you extract the img from Orangefox archive, you can flash it directly from fastboot, otherwise, flash TWRP first, then flash the Orangefox zip from TWRP.
Sent from my Redmi Note 8 using Tapatalk

But will flashing from TWRP keep both TWRP and OrangeFox?

PorridgePi said:
But will flashing from TWRP keep both TWRP and OrangeFox?
Click to expand...
Click to collapse
No, it won't.
Sent from my Redmi Note 8 using Tapatalk

Thank you so much for clearing my doubts. I will flash OrangeFox directly then. I still need to wait for quite a while for my bootloader to be unlocked...

PorridgePi said:
Thank you so much for clearing my doubts. I will flash OrangeFox directly then. I still need to wait for quite a while for my bootloader to be unlocked...
Click to expand...
Click to collapse
You're welcome and good luck.
Sent from my Redmi Note 8 using Tapatalk

[RECOVERY][OnePlus 6/6T][OFFICIAL] Pitch Black Recovery Project [v3.4.0]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.7.0
PitchBlack version: 4.0
For device: enchilada & fajita
Maintainer/Authors build: @Siddk
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Device tree: Fajita Enchilada
Kernel: Prebuilt
PitchBlack Team: @rezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Fully native android like UI
Supports Treble and non-Treble ROMs
Up-to-date kernel, built from sources
Full dark theme with changeable accents
Reorganized menus
MIUI OTA support
Disable DM Verity
Use AromaFM as default file manager
Various tools are include
Universal flash-able file for all variant of a device
Many bug fixes & optimization & much more
Click to expand...
Click to collapse
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Boot into recovery by fastboot boot recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
PBRP Side Changelog
Code:
V4.0
- Bump to 4.0
- Based on TWRP 3.7.0
- Based On A12.1 Manifest
V3.2.0
- Bump to 3.2.0
- Based on TWRP 3.6.2
v3.1.0
- Bump to 3.1.0
- Based on TWRP 3.5.2
- Redesigned homescreen
- Fixed minor glitches
- Added more languages support
v3.0.0
- Fully Redesigned UI
- Added new Keychecks While Flashing PBRP or recovery.img or Ramdisk
- Fully Redesigned Website https://pitchblackrecovery.com
- New Android like Power Menu (Activated via power key hold)
- Flashlight toggled by Vol up(+) on hold
- New Scrollable Advanced menu
- Totally Redesigned Icons
- Removed old unnecessary Theming Stuff
- Tested on almost all handy Resolutions
- Flashlight toggle on Lockscreen
- More checks for SAR/Non-SAR\
- New Navbar
- Support on almost all Android version (5.0+)
- Update ozip decrypt
- Fix up ozip print logs & take all paths
- Update FUNDING.yml
- Fixed encrypted removal checks & buttons
- Add Flag for disabling treble compatibility by default
- Is_Data_Wiped: Simplify function signature
- Unified AB_OTA_UPDATER
- Change AB device log storage to /data/recovery
- Delay start if specified in board
- Optimize touchscreen driver initialization delay.
v2.9.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
Device Side Changelog
Code:
Encryption support for A12 & above
Slot switching fix
Seprate Build
Bugs
- You tell me!
Downloads
Oneplus 6
Oneplus 6T

3.1.0 Redesigned homescreen Screenshot

Reserved

Siddk said:
Code:
/*
*Disclaimer
*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Introduction
Pitch Black Recovery is a fork of TWRP with many improvements to make your experience better. It's more flexible & easy to use.
Based on TWRP version: 3.4.0
PitchBlack version: 3.0.0
For device: YourDeviceCodeNameHere
Maintainer/Authors build: Mention your xda profile here
PitchBlack Source Code: https://github.com/PitchBlackRecoveryProject
Device tree: https://github.com/siddhrsh/android_device_oneplus_enchilada
Kernel: Prebuilt
PitchBlack Team: @rezaadi0105, @shovon, @manjot.gni, @androiabledroid, sagar
Features
Installation Instructions
From previous version or other recovery
Download the PitchBlack zip to your device
Reboot to your current custom recovery
Flash the PitchBlack zip
The device will automatically reboot into PitchBlack Recovery after installation
Enjoy
From PC
Download PitchBlack Recovery flashable zip from bellow
Extract the PBRP zip
Goto fastboot mode in your device
Flash the recovery.img by fastboot flash recovery.img
Boot into PBRP
Copy the zip to internal storage
Flash it
Enjoy
Changelog
PBRP Side Changelog
Code:
v3.0.0
- Fully Redesigned UI
- Added new Keychecks While Flashing PBRP or recovery.img or Ramdisk
- Fully Redesigned Website https://pitchblackrecovery.com
- New Android like Power Menu (Activated via power key hold)
- Flashlight toggled by Vol up(+) on hold
- New Scrollable Advanced menu
- Totally Redesigned Icons
- Removed old unnecessary Theming Stuff
- Tested on almost all handy Resolutions
- Flashlight toggle on Lockscreen
- More checks for SAR/Non-SAR\
- New Navbar
- Support on almost all Android version (5.0+)
- Update ozip decrypt
- Fix up ozip print logs & take all paths
- Update FUNDING.yml
- Fixed encrypted removal checks & buttons
- Add Flag for disabling treble compatibility by default
- Is_Data_Wiped: Simplify function signature
- Unified AB_OTA_UPDATER
- Change AB device log storage to /data/recovery
- Delay start if specified in board
- Optimize touchscreen driver initialization delay.
v2.9.0
- Update kernel
- Update DM Verity Logic
- Update magisk
- Update unroot magisk
- Some bug fixed
Device Side Changelog
Code:
Bugs
- You tell me!
Downloads
Image
https://drive.google.com/file/d/1R7DBtONE2NDUCLRu12kDMQHU8RzJXHgM/view?usp=sharing
Flashable zip
https://drive.google.com/file/d/1s9Vej-wNqravr5VZWqTVUIHoSZQ7ZWGu/view?usp=sharing
Special Thanks to @mauronofrio for tree
Click to expand...
Click to collapse
hello.. i cant access the flashable zip.. i click the link and it shows error!

We're sorry. You can't access this item because it is in violation of our Terms of Service.
This is error we are getting while trying to download ZIP

Cannot download from Google drive

CYB3R0ID694 said:
We're sorry. You can't access this item because it is in violation of our Terms of Service.
This is error we are getting while trying to download ZIP
Click to expand...
Click to collapse
Yes,can't download

CYB3R0ID694 said:
We're sorry. You can't access this item because it is in violation of our Terms of Service.
This is error we are getting while trying to download ZIP
Click to expand...
Click to collapse
Me too getting same error

The file will have to be reuploaded again somewhere else since google flagged it
Wait for the dev to update the link

Although those who can't wait to try this recovery out(me) can flash recovery in this way:
WARNING: If you know what you're doing then only follow these steps otherwise wait for the dev to upload the zip file. Don't blame me for bricking your device. Do it at your own risk!
A) If you have TWRP installed then:
1. Reboot to recovery
2. Select Install/Flash
3. Select Install Image
4. In partitions Select Recovery Ramdisk
5. Swipe to Flash
6. Let it complete and then Reboot back to Recovery to check if everything went fine.Enjoy!
B) If you don't have TWRP installed then:
1. Reboot to fastboot
2. run fastboot boot twrp.img(use the latest one as we are just going to boot into TWRP)
3. After booting into recovery follow the steps from Section A) Step 2 above and you're good to go!

Thanks. i can install the image but i like to have the zip on hand also, so ill be looking forward to the re-upload.

Aduser345 said:
The file will have to be reuploaded again somewhere else since google flagged it
Wait for the dev to update the link
Click to expand...
Click to collapse
Wait for a lot? Waiting to see any change in download

Aduser345 said:
Although those who can't wait to try this recovery out(me) can flash recovery in this way:
WARNING: If you know what you're doing then only follow these steps otherwise wait for the dev to upload the zip file. Don't blame me for bricking your device. Do it at your own risk!
A) If you have TWRP installed then:
1. Reboot to recovery
2. Select Install/Flash
3. Select Install Image
4. In partitions Select Recovery Ramdisk
5. Swipe to Flash
6. Let it complete and then Reboot back to Recovery to check if everything went fine.Enjoy!
B) If you don't have TWRP installed then:
1. Reboot to fastboot
2. run fastboot boot twrp.img(use the latest one as we are just going to boot into TWRP)
3. After booting into recovery follow the steps from Section A) Step 2 above and you're good to go!
Click to expand...
Click to collapse
but you cant access it feature if flashed using this method

umangtayal said:
hello.. i cant access the flashable zip.. i click the link and it shows error!
Click to expand...
Click to collapse
CYB3R0ID694 said:
We're sorry. You can't access this item because it is in violation of our Terms of Service.
This is error we are getting while trying to download ZIP
Click to expand...
Click to collapse
Puthenpurayilgeorgechacko said:
Cannot download from Google drive
Click to expand...
Click to collapse
Puthenpurayilgeorgechacko said:
Me too getting same error
Click to expand...
Click to collapse
Aduser345 said:
The file will have to be reuploaded again somewhere else since google flagged it
Wait for the dev to update the link
Click to expand...
Click to collapse
mixlex said:
Thanks. i can install the image but i like to have the zip on hand also, so ill be looking forward to the re-upload.
Click to expand...
Click to collapse
sorry for inconvenience link updated also zip file attached in forum

Siddk said:
sorry for inconvenience link updated also zip file attached in forum
Click to expand...
Click to collapse
thank you!!

Siddk said:
sorry for inconvenience link updated also zip file attached in forum
Click to expand...
Click to collapse
Thanks man really appreciate your work!!!!!

umangtayal said:
thank you!!
Click to expand...
Click to collapse
Got it, thanks!

Cannot flash any kernel due to change in codename via PBRP. Currently the name is oneplus6. Please change it to enchilada. ATM we have to change device codename to flash kernel via PBRP.

I just flashed AOSP Rom with PBRP, I don't have any problems.

Vivekvlr771 said:
Cannot flash any kernel due to change in codename via PBRP. Currently the name is oneplus6. Please change it to enchilada. ATM we have to change device codename to flash kernel via PBRP.View attachment 5150983View attachment 5150991
Click to expand...
Click to collapse
i will fix it

[ROM][OFFICIAL][11.0_r48][STABLE][picasso] LegionOS 3.14

[Reserved]

hi, this rom can use gesture zoom on story fb,instagram and google map ?

TQHuuThuan said:
hi, this rom can use gesture zoom on story fb,instagram and google map ?
Click to expand...
Click to collapse
Hello, sorry for my late reply.
I tested on Instagram stories and it works. It's inside Accesibility settings. It also works on launcher, so yeah it seems to work under any app.

New stable update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 29-3-2021:
- Fixed autobrightness not working.
- SELinux is now enforcing.
- Source updated (fixes bubbles chat and adds more features).
Full device tree details
How to upgrade:
Dirty flash should be ok (if you face weird issues/bootloop, then try a clean flash before reporting them!).
Dirty flash:
1. Reboot to recovery (latest OFRP version recommended)
2. Flash ROM.
3. Flash GApps (if you had).
4. Flash Magisk (optional, as always).
5. Wipe dalvik & cache.
6. Reboot to system (realize that first boot might take longer than usual).
If you face any flashing error and the ROM doesn't flash succesfully, take recovery.log and send here.
Clean flash:
1. Download the ROM and GApps package (optional) and transfer them to your device.
2. Boot to recovery (OFRP recommended).
5. Flash xiaomi.eu (v21.3.17/24 is strongly recommended).
6. Flash ROM.
7. Flash GApps (optional, needed for. Google Playstore or Google Camera to work).
8. Flash Magisk (optional as well).
9. Format data and wipe cache partition.
10. Reboot (realize that first boot might take longer than usual).
11. Enjoy!

New stable update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 13-5-2021:
- Update prebuilt kernel to MIUI EU 21.5.12.
- Merged May 2021 security patch.
- Source updated to LegionOS 3.8 source.
- Enabled LTE+ icon.
- Added camera pinner (improves its performance).
- Boosted initial bootup time.
- Added some gaming, battery-saving and performance props.
- Updated brightness screen values.
- Added Clear Speaker and Touch Gaming profiles to XiaomiParts.
- Bluetooth improvements.
- Addressed some SELinux denials.
Full device tree details
How to upgrade:
Dirty flash should be ok (if you face weird issues/bootloop, then try a clean flash before reporting them!).
Dirty flash:
1. Reboot to recovery (latest OFRP version recommended)
2. Flash ROM.
3. Flash GApps (if you had).
4. Flash Magisk (optional, as always).
5. Wipe dalvik & cache.
6. Reboot to system (realize that first boot might take longer than usual).
If you face any flashing error and the ROM doesn't flash succesfully, take recovery.log and send here.
Clean flash:
1. Download the ROM and GApps package (optional) and transfer them to your device.
2. Boot to recovery (OFRP recommended).
5. Flash xiaomi.eu (v21.5.12 or higher is strongly recommended).
6. Flash ROM.
7. Flash GApps (optional, needed for. Google Playstore or Google Camera to work).
8. Flash Magisk (optional as well).
9. Format data and wipe cache partition.
10. Reboot (realize that first boot might take longer than usual).
11. Enjoy!

Redmi K30i 5G don't have OFRP. Can I use TWRP?

New stable official update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 23-5-2021:
- Update prebuilt kernel to MIUI EU 21.5.20.
- First official build, with GApps included.
- Source updated to LegionOS 3.9 source (3.9 changelog here).
- Added face unlock feature.
- Some bluetooth audio improvements.
- Some performance tweaks.
- Include APN configs from stock (fixes data mobile issues in some countries).
- Increased status bar padding at the left of the status bar.
- Added Notch bar killer overlay to developer options (lets you fill the screen completely in landscape mode).
- Added Hide notch overlay to developer options (fills the status bar space empty).
Full device tree details
How to upgrade:
Clean flash is recommended!
Clean flash:
1. Download the ROM and transfer it to your device.
2. Boot to recovery (OFRP recommended).
5. Flash xiaomi.eu base (v21.5.20 or higher is strongly recommended).
6. Flash ROM.
7. Flash Magisk (optional).
8. Format data and wipe cache partition.
9. Reboot (realize that first boot might take longer than usual).
10. Enjoy!

Hey Google Don't work when screen is off

waiphyoaung88 said:
Hey Google Don't work when screen is off
Click to expand...
Click to collapse
You mean the "OK Google" wake-up?

masemoel said:
You mean the "OK Google" wake-up?
Click to expand...
Click to collapse
yes

HI!ROMER.Many of the settings in ROM are still in English, even if the system language has been changed to Chinese

Unite_LD said:
HI!ROMER.Many of the settings in ROM are still in English, even if the system language has been changed to Chinese
Click to expand...
Click to collapse
Yes, no one translated the LegionSettings to Chinese yet... Feel free to do it!

great work,keep it up!

New stable official update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 30-06-2021:
- Update prebuilt kernel and blobs to MIUI EU 21.6.23.
- Source updated to LegionOS 3.10 source (see LegionOS 3.10 changelog here).
- Fixed "OK" Google Assistant issues.
- Enabled more audio features (see under developer options).
- SafetyNet now passes even without MagiskHide.
- Added FPS overlay info.
- Fixed screen lag during screen recording.
- Added bass booster preset in Mi Sound Enhacer.
- Implemented dynamic refresh rate (improves battery life).
- Some performance tweaks.
Full device tree details
How to upgrade:
Clean flash is recommended!
With OTA, dirty may be enough though... (just ensure you have the OTA feature enabled in your recovery).
Clean flash:
1. Download the ROM and transfer it to your device.
2. Reboot to recovery.
5. Flash xiaomi.eu base (v21.5.20 or higher is strongly recommended).
6. Flash ROM.
7. Flash Magisk (optional).
8. Format data and wipe cache partition.
9. Reboot (realize that first boot might take longer than usual).
10. Enjoy!

Hi, masemoel.
Thank you very much for the ROM!
I flashed LegionOS-v3.10-picasso-20210630-OFFICIAL-GAPPS.zip (build: RQ3A.210605.005) from that MEGA link. The ROM is great. The animation and design are pretty smooth. It has a fantastic overall experience!
Almost everything works well, except that:
1. Google Camera (version: 8.2.400.377695972.29) always keeps stopping, even though the phone camera works well in various other apps. I am sure that every other GApps bundled are functioning. I tried to clean its storage & cache several times and uninstall & re-install the app from the Play Store. But it does not help.
2. Pixel Launcher won't show the popup for adding new shortcut icons to the home screen. e.g. the weather shortcut from the Google app. But a shortcut can be added via long pressing app icons and dragging manually. I tried to clean its storage & cache and reset its all permissions several times. But it does not help. (Not sure whether it is specific to the ROM or a general problem of Pixel Launcher itself).

Hi, masemoel.
I downloaded and installed the latest image ( LegionOS-v3.10-picasso-20210630-OFFICIAL-GAPPS.zip ) , but found that the back gesture did not work.
Is there something wrong with my installation? How do I fix it?

New stable official update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 16-07-2021:
- Source updated to LegionOS 3.11 source (see LegionOS 3.11 changelog here).
- Update prebuilt kernel and blobs to MIUI EU 21.7.14.
- Fixed Wi-Fi display not working.
- Fixed some GPS issues.
- Fixed low signal with dual-SIM.
- Fixed GApps not included in GApps OTA package.
Full device tree details
How to upgrade:
Clean flash is recommended!
With OTA, dirty may be enough though... (just ensure you have the OTA feature enabled in your recovery).
Clean flash:
1. Download the ROM and transfer it to your device.
2. Reboot to recovery.
5. Flash xiaomi.eu base (v21.7.14 or higher is strongly recommended).
6. Flash ROM.
7. Flash Magisk (optional).
8. Format data and wipe cache partition.
9. Reboot (realize that first boot might take longer than usual).
10. Enjoy!

1.Is it contains weather widget?Just like most Chinese rom does?
2.How to use NFC to simulate the IC Card?

New stable official update is up!
NOTE: I've created a TG chat, so that you will get notified whenever a new build from my part is released, and also direct support from me! Join here
Changelog 14-08-2021:
- Source updated to LegionOS 3.12 source (see LegionOS 3.12 changelog here).
- Kernel updated to EU 21.8.11 one.
- Improved performance.
- Fixed laggy media in Google Photos.
- Decreased drain on idle.
- Added more BT and RIL configs.
- Added dynamic refresh rate options.
- Improved HDR rendering performance on GCams.
- Added NFC Mifare classic support.
Full device tree details
How to upgrade:
Clean flash is mandatory!
Clean flash:
1. Download the ROM and transfer it to your device.
2. Reboot to recovery.
5. Flash xiaomi.eu base (v21.8.11 or higher is strongly recommended).
6. Flash ROM.
7. Flash Magisk (optional).
8. Format data and wipe cache partition.
9. Reboot (realize that first boot might take longer than usual).
10. Enjoy!

[ROM][OFFICIAL][ginkgo][11] AICP r16.1 for Redmi Note 8 / 8T

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://dwnld.aicp-rom.com
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal GApps packages still have issues, however feel free to try other GApps if you want to, just try MindTheGapps if you have any GApps related issues
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (OrangeFox Recovery recommended).
3. Wipe the System, Vendor, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM zip file.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest OrangeFox recovery, keep in mind that this could also be an unofficial version!
On encrypted devices, you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_ginkgoDevice tree source:
https://github.com/AICP/device_xiaomi_ginkgoVendor source:
AICP/proprietary_vendor_xiaomi
Contribute to AICP/proprietary_vendor_xiaomi development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@Adithya R
@madmax7896
Information:
ROM OS Version: 11.x
Kernel: Linux 4.14
ROM Firmware required: Latest Firmware from MIUI 21.4.28 and up
Status: STABLE
Release Date: 05-20-2021
You want to see a "normal" night at the "DEV office", click here!!

May 20, 2021
- Initial Build

May 28, 2021
Changelog:
• Fixed Battery Capacity Values
• Switched to Arrow Tree
• Kernel Upstream for 4.14.234
June 20, 2021
Changelog:
• Initial Official release
• June Security Patch
• Fixed missing APN and Keyboard when booting without gapps
• Updated blobs from MIUI 21.5.27
• Upstreamed SurgeX .237
• Disabled blur by default
August 6, 2021
Changelog :
* Blobs updated from LA.UM.9.11.r1-04500-NICOBAR.0 (CAF)
* Updated blobs from MIUI V12.0.1.0.RCOMIXM
* Upstreamed SurgeX .241
* Enabled IORap prefetching
* Undervolt GPU to reduce heat
* Boost GPU to max for blur
August 20, 2021
Changelog :
* Updated blobs from MIUI V12.0.2.0.RCOMIXM
* Upstreamed SurgeX .242
* Various updates and optimization in kernel
* Removed Widewine hack (R fw is now required)
* Boost I/O during bootup to improve boot speed
* Boost CPU during wake for faster faceunlock
* Increased default f2fs checkpoint interval
* Disabled conservative PL boost
October 15, 2021
Changelog:
* Switched to QuicksilveR kernel
* Fixed wakeup spams
* Updated KCAL preview from MIUI12
* Added 2 KCAL preview
* Disable Notification LED on willow
* Fix mic issues
* Added CABC and HBM support
* More changelog from past weekly builds in support group

Screenshots
https://drive.google.com/drive/folders/1FAkpBX5RaIKjc6KaRxsIaeeoZkN8hs9T?usp=sharing

nice

Why does it come without a keyboard? Can't connect to WiFi or login into Play Store because of that.
The ROM feels pretty snappy tho.
I'm on willow (8T) btw.

I'm on willow.
for me, all works perfect, smooth, fabulous battery life !!!!
After three days of use 40% left with 1h 43 min screen on. All the other room I've tried had a lot more battery drain per hour without any usage.

Hi! Few questions:
Does this ROM pass SafetyNet?
In the guide you suggest OrangeFox as recovery, but for OTA you say TWRP is recommended...so which recovery we should flash?

GattoLesso said:
Hi! Few questions:
Does this ROM pass SafetyNet?
In the guide you suggest OrangeFox as recovery, but for OTA you say TWRP is recommended...so which recovery we should flash?
Click to expand...
Click to collapse
• Pass even without Magisk
• It does support both recovery but I recommend OrangeFox

CSAPawn said:
• Pass even without Magisk
• It does support both recovery but I recommend OrangeFox
Click to expand...
Click to collapse
perro

Hi all , i am on latest at this moment version 31/12/2021 . It seems to me that the sound enhancement does not work as it should. Turning these options on or off will not change the sound quality. For example, the same settings on RedmiNote9S "miatoll" work fine .. and you can clearly hear the difference ..

Hayastan said:
Hi all , i am on latest at this moment version 31/12/2021 . It seems to me that the sound enhancement does not work as it should. Turning these options on or off will not change the sound quality. For example, the same settings on RedmiNote9S "miatoll" work fine .. and you can clearly hear the difference ..
Click to expand...
Click to collapse
Sound enchantment do you mean the Xiaomi Parts one?

CSAPawn said:
Sound enchantment do you mean the Xiaomi Parts one?
Click to expand...
Click to collapse
Sorry , yes , i forgot to mention about that . yes i am about Xiaomi Parts

Hayastan said:
Sorry , yes , i forgot to mention about that . yes i am about Xiaomi Parts
Click to expand...
Click to collapse
Will look into it, in the meantime do you have any magisk modules? That can break sound enchantment?

CSAPawn said:
Will look into it, in the meantime do you have any magisk modules? That can break sound enchantment?
Click to expand...
Click to collapse
No i don't , only systemless hosts .

CSAPawn said:
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS), we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q-R with a base of AOSP repositories and some additions from LineageOS for device-specific repositories.
If there are any bugs we will sort them out if it concerns our codebase. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@maxwen and the rest of the OmniRom team
DU team
Resurrection Remix team
AOSiP team
Community
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 16.1
Download link: https://dwnld.aicp-rom.com
Please note that official builds will be deleted from our servers every month due to maintenance services.
Starting with AICP 15 we will be storing a copy of the most recent release here: https://media.aicp-rom.com/vault/.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
Google Apps:
We recommend MindTheGapps as it has been thoroughly tested and it works well with the ROM, some other minimal GApps packages still have issues, however feel free to try other GApps if you want to, just try MindTheGapps if you have any GApps related issues
MindTheGapps: https://androidfilehost.com/?w=files&flid=322935
Mirror: http://downloads.codefi.re/jdcteam/javelinanddart/gapps
You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but the discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Does this ROM include GApps or do I have to flash them separately?
A. No, we do not include prebuilt GApps, because of possible licensing issues with Google Software and because some users do not want GApps preinstalled as they want to use alternative services like MicroG or just prefer flashing a GApps "flavor" of their liking.
Q. Does this ROM use the camera or gallery app from stock?
A. It depends on the device. In most cases these apps include proprietary libs/code and cannot be included in the device trees on Github or we risk having the ROM banned from Github. In this case, we might try to make them installable (separate from the ROM zip), or we might provide a version of these apps with the ROM that doesn't include any proprietary libs. It's also sometimes the case that these apps are simply not included because we didn't feel the need to do so for the device in question.
Q. Does this ROM have Extended/Scrolling screenshot?
A. No, extended screenshot was implemented using an app extracted and modified from manufacturer firmware/system images and is proprietary as well. It led to the closing of many ROM's sources on GitHub.
Q. Does this ROM have FaceUnlock?
A. No, FaceUnlock was also an app extracted and modified from some manufacturers. Even Google removed the Trusted Face (FaceUnlock) feature for security reasons on Android 9.0/10.x. Adding the modified feature did the same to ROM sources as described above.
Q. Can you add (insert favorite weather provider)?
A. No, we cannot add more weather providers as the implementations change and we (the ROM) now have to pay for most services, and that is not cheap, so we decided to use the best free service that we could find, the only way to add your own is for users to apply for their own API key to use their preferred service.
Q. Does this ROM have private official builds with the above proprietary libs included?
A. No, we believe in open source software, this way users know what's in the build and can replicate it themselves, all official builds are built on our build servers using the public sources from github and no one can (or would) add their own private sources to the build.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behavior on flashing a new official build by (or using) the build-in updater service.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache, and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution, and reboot. Or just use the OTA app to perform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to lose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to lose root. Now swipe to flash and reboot afterward.
Using the ROM:
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. Do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get, and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section on the AICP Extras main page.
The ROM should contain everything you need to enjoy Android R. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM zip file.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (OrangeFox Recovery recommended).
3. Wipe the System, Vendor, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM zip file.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.4 don't usually need to be flashed on every dirty flash.
Depending on the device, you may need to flash it every time, unless your maintainer says otherwise, you should be fine.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest OrangeFox recovery, keep in mind that this could also be an unofficial version!
On encrypted devices, you will have to enter your PIN/password in TWRP before the process starts.
If you want to contribute to AICP, or if you want to see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_xiaomi_ginkgoDevice tree source:
https://github.com/AICP/device_xiaomi_ginkgoVendor source:
AICP/proprietary_vendor_xiaomi
Contribute to AICP/proprietary_vendor_xiaomi development by creating an account on GitHub.
github.com
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
@Adithya R
@madmax7896
Information:
ROM OS Version: 11.x
Kernel: Linux 4.14
ROM Firmware required: Latest Firmware from MIUI 21.4.28 and up
Status: STABLE
Release Date: 05-20-2021
You want to see a "normal" night at the "DEV office", click here!!
Click to expand...
Click to collapse
Does AptX and LDAC work?

promethsuresh said:
Does AptX and LDAC work?
Click to expand...
Click to collapse
Don't know bout LDAC, but AptX worked flawless last time I ran the rom (some weeks ago).

NeoPreacher said:
Don't know bout LDAC, but AptX worked flawless last time I ran the rom (some weeks ago).
Click to expand...
Click to collapse
LDAC doesn't work

Hmm cant find anything related Xiaomi Parts in the changelog for 07/01/2022 build , but dirty flashed over previous build and now Audio Enchantment of Xiaomi Part works as expected )

Hello, does your rom support signature spoofing for microG ? thanks

[ROM][UNOFFICIAL][12.1_r22][STABLE][picasso] crDroid v8.10

Reserved

New stable update is up!NOTE: I've created a TG chat, so that you will get notified whenever a new build from my part is released, and also direct support from me! Join here
Changelog 03-02-2022:- New customization features by crDroid (status bar icons, incall vibration, game space, flash on call, force small lockscreen clock...).
- Added battery-friendly pocket mode.
- Go back to crDroid launcher.
- Other improvements.
Full device tree details
How to upgrade:Dirty flash should be ok (if you face weird issues/bootloop, then try a clean flash before reporting them!).
Dirty flash:1. Reboot to recovery (latest OFRP version recommended)
2. Flash ROM (remember to transfer the ROM zip to OTG or your PC to sideload it as decryption is broken on Android 12 at this moment...).
3. Flash GApps (if you flashed them).
4. Flash Magisk (optional as well).
5. Wipe dalvik & cache.
6. Reboot to system (realize that first boot might take longer than usual).
If you face any flashing error and the ROM doesn't flash succesfully, take the recovery.log file and send it here.

Swipe up to go home doesn't working, pixel launcher keep not responding

gnaoh1007 said:
Swipe up to go home doesn't working, pixel launcher keep not responding
Click to expand...
Click to collapse
Your GApps are damaged. Which one did you flashed?

masemoel said:
Your GApps are damaged. Which one did you flashed?
Click to expand...
Click to collapse
I flashed stock NikGApps. I am trying FlameGApps

gnaoh1007 said:
I flashed stock NikGApps. I am trying FlameGApps
Click to expand...
Click to collapse
For me both worked fine. Are you deleting the setup wizard?

I cannot install some apps from Google Play Store. It said "Your device isn't compatible with this version."

siamese007 said:
I cannot install some apps from Google Play Store. It said "Your device isn't compatible with this version."
Click to expand...
Click to collapse
Which app can't you install?

masemoel said:
Which app can't you install?
Click to expand...
Click to collapse
Some apps that I usually use are bank apps, Chrome fast & secure. I searched about how to fix this but does not seeam to fix this issue yet.
Edit: This happens for my K30 5G since MIUI.eu and Stock ROMs 12.5 - 13. Is there any clue of how to fix this?

siamese007 said:
Some apps that I usually use are bank apps, Chrome fast & secure. I searched about how to fix this but does not seeam to fix this issue yet.
Edit: This happens for my K30 5G since MIUI.eu and Stock ROMs 12.5 - 13. Is there any clue of how to fix this?
Click to expand...
Click to collapse
You don't have those apps available on xiaomi.eu as well?

masemoel said:
You don't have those apps available on xiaomi.eu as well?
Click to expand...
Click to collapse
Correct. And some ROMs as well. But A12 Arrow and Elixir ROMs for K30 5G do not have this issue.
If I install MIUI.eu 12 and flash GSI ROM, I won't have this issue. If I install MIUI.eu 12.5 or above and flash GSI ROM, I will have this issue.

New stable update is up!NOTE: I've created a TG chat, so that you will get notified whenever a new build from my part is released, and also direct support from me! Join here
Changelog 13-02-2022:- Bump to crDroid v8.2 and February 2022 security patch.
Full device tree details
How to upgrade:Dirty flash should be ok (if you face weird issues/bootloop, then try a clean flash before reporting them!).
Dirty flash:1. Reboot to recovery (latest OFRP version recommended)
2. Flash ROM (remember to transfer the ROM zip to OTG or your PC to sideload it as decryption is broken on Android 12 at this moment...).
3. Flash GApps (if you flashed them).
4. Flash Magisk (optional as well).
5. Wipe dalvik & cache.
6. Reboot to system (realize that first boot might take longer than usual).
If you face any flashing error and the ROM doesn't flash succesfully, take the recovery.log file and send it here.

Does this ROM support L1 DRM ? How is the screen on time on CR Droid?

trunglevt said:
Does this ROM support L1 DRM ? How is the screen on time on CR Droid?
Click to expand...
Click to collapse
Yes, flash crDroid on top of latest xiaomi.eu stable release and you must have L1. And the battery is not bad, but subjective to the use of the phone you do.

masemoel said:
Yes, flash crDroid on top of latest xiaomi.eu stable release and you must have L1. And the battery is not bad, but subjective to the use of the phone you do.
Click to expand...
Click to collapse
Tks. I am using arrow 12 but the battery drains pretty fast when using.

New big stable update is up!Looong time since the last update hehe... a lot of work in the background
NOTE: I've created a TG chat, so that you will get notified whenever a new build from my part is released, and also direct support from me! Join here
Changelog 29-06-2022:- Bump to crDroid v8.6 source, based on Android 12.1.
- A total rebase of a new device tree with OSS vendor.
Full device tree details
How to upgrade:As I have rebased the device tree, doing a clean flash is totally mandatory from all previous versions.
Clean flash:1. Flash crDroid zip.
2. Flash GApps and Magisk (optional).
3. Format data. Also wiping cache & dalvik is recommended.
4. Reboot to system (realize that first boot might take longer than usual) and enjoy!
If you face any flashing error and the ROM doesn't flash succesfully, take the recovery.log file and send it here.

Masemoel bro can u try to build >>>pixel os<<< rom plzzz.... Now a day most popular rom

masemoel said:
New big stable update is up!Looong time since the last update hehe... a lot of work in the background
NOTE: I've created a TG chat, so that you will get notified whenever a new build from my part is released, and also direct support from me! Join here
Changelog 29-06-2022:- Bump to crDroid v8.6 source, based on Android 12.1.
- A total rebase of a new device tree with OSS vendor.
Full device tree details
How to upgrade:As I have rebased the device tree, doing a clean flash is totally mandatory from all previous versions.
Clean flash:1. Flash crDroid zip.
2. Flash GApps and Magisk (optional).
3. Format data. Also wiping cache & dalvik is recommended.
4. Reboot to system (realize that first boot might take longer than usual) and enjoy!
If you face any flashing error and the ROM doesn't flash succesfully, take the recovery.log file and send it here.
Click to expand...
Click to collapse
Thank you for the update. I hope the new build will make the phone able to install Google Chrome. The previous build did not make it capable to. I love crDroid the most. Even though someone would say other OSs are better.

Great Rom and it s butter smooth. Thank you for all the effort. Is AOD recommended for IPS display for this rom?

Develop Bugs

welcome