ive been try everything but i still can't flash magisk patched boot.img in fastboot or threw qfill in edl mode or threw the sp flash tool, its hopeless right?
Related
Ive got twrp installed but every rom i install doesn't boot up so i need to get into QCloader9008 mode so i can flash stock rom via Miflash. Any mehods for reaching dat via twrp or fastboot??
Another question: can the stock rom be flashed from twrp (its a 7z file)?
For going to edl
fastboot -i 0x2b4c reboot edl
It might work
And no you can't flash stock unmodified rom via twrp.
Short usb cable's black wire and power on your phone. While connecting to mi flash.
Hey guys I think i have a problem
I was trying to flash v4a, and realized that I needed to downgrade twrp from RC2 to RC1. My phone had been rooted by SU.
I proceeded to do the flash and then flashed the v4a mod but now my phone can't get out of TWRP. When I click reboot, it boots into the recovery mode.
Any ideas on how to solve this? I cannot use my phone now
Use fastboot to flash stock boot on both slots
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Fastboot boot twrp.img
Then flash twrp and all should be fine
mikaole said:
Use fastboot to flash stock boot on both slots
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
Fastboot boot twrp.img
Then flash twrp and all should be fine
Click to expand...
Click to collapse
Just wanted to chime in so people in the future can see that this worked, at least for me on my Pixel 2 XL.
hey, I tried this method to boot back into system but lost TWRP recovery... any way to install TWRP without flashing boot.img again? or which boot.img should I be flashing back to slot A and B.. i extracted the boot.img from factory images but i lose TWRP recovery
Hi,
I recently installed magisk, then xposed and my phone went into bootloop. I reflashed with original boot image and wipped data and it was starting ok.
Then i installed magisk threw TWRP.
But the OTA would not work.
Si I'd like to flash the stock rom to restart from zero.
Can I just flash it like that, with mi flash ?
Or do I have first to unroot ? And to relock bootloader ?
takhama said:
Hi,
I recently installed magisk, then xposed and my phone went into bootloop. I reflashed with original boot image and wipped data and it was starting ok.
Then i installed magisk threw TWRP.
But the OTA would not work.
Si I'd like to flash the stock rom to restart from zero.
Can I just flash it like that, with mi flash ?
Or do I have first to unroot ? And to relock bootloader ?
Click to expand...
Click to collapse
no need of unrooting and never lock your bootloader with custom recovery or rom .
I recommend you to flash the stock rom in edl mode , connect your device in fastboot mode to your PC and open command prompt in your adv/fastboot folder .
then type the command : fastboot oem edl , the screen of the device will turn off , but notification led will blink , then flash stock firmware via MiFlash, after flash completed , hold power button for about 10 seconds(until you feel the vibration)
Thanks Mate ! I do this rght now !
(my phone is out: only starting if I install magisk with TWRP... Flashing the stock boot img will go in boot loop. So weird that let's go back to the stock )
nikoman1987 said:
no need of unrooting and never lock your bootloader with custom recovery or rom .
I recommend you to flash the stock rom in edl mode , connect your device in fastboot mode to your PC and open command prompt in your adv/fastboot folder .
then type the command : fastboot oem edl , the screen of the device will turn off , but notification led will blink , then flash stock firmware via MiFlash, after flash completed , hold power button for about 10 seconds(until you feel the vibration)
Click to expand...
Click to collapse
Where i can download stock firmware sir ?
I was in realme UI 2.0, I wanted to downgrade it into RUI 1.0.
So I downloaded rmx1931 c27.ofp fastboot rom and tried flashing it using realme flashtool.
it failed several time and sometime showed flashed successful but didn't bootup, keep booting into fastboot mode.
I tried to get into recovery but it also boot into flastboot mode again, then I tried flash twrp and orangefox using cmd menu. everything flashed successfully but doesn't work. I tried flashing vbmeta also, it doesn't work either.
How can I fix this now?
Someone help me Please.
I was doing the whole shebang, got my bootloader unlocked via QFIL and installed ArrowOS successfully, somewhere along the way I went wrong when flashing magisck, now I'm bootlooping in fastboot.
I can access Fastboot and flash the recovery that shows you which slot you're in via QFIL, but I can't go any further. I have backups of my abl and my boot, and my custom magisk IMG .
Can I fix this or do I throw it away?