I'm wondering how can I get my original IMEI number which is lost after flashing Stock ROM via SP Flash tool. I mistakely selected Format + Download option in SP flash tool while flashing, Now after flash process is done, there's nothing showing in IMEI status. I lost my Phone's box too where original IMEI is printed. Now I have no Original IMEI of my Phone. I s there any way to get original IMEI number of my Phone's Model Lenovo K8 note XT1902-3 (oreo) ?
Thanks
Related
Recently I bought mi max 32/3GB in stable ROM.
I checked software, hardware, imei (imei1 &imei2 different number just like in the box) etc no problem.
So, I try to unblock bootloader but doesn't works out.
I flash to developer rom, try again and succeed, bootloader unlocked.
Flash TWRP, flash MIUI EU boot successfully, and i think I don't like MIUI ?
So, back to TWRP now flash AICP.
Now, hydrogen run smoothly,l. I checked imei imei1 and imei2 same number ?
Why they got same number?
What did I miss?
Any solution?
Hello dear XDA users!
First of all I would like to give offer to one that will solve my problem, I will send him 30 EUR directly to his PayPal account.
I am Note 7 Lover as I am collector of these phones.
I have many succesful Note 7 phones recovered from death updates which were fully discharged.
But I did great mistake which I can´t live with.
I had one Note 7 , fully functioning with all connectivities. I managed to install HydraRom and Hydrakernel there on my own as I did it many times before. I am an idiot I didn´t make backup of the system and mainy EFS in working state.
I broke display a little on my primary Note 7 so I needed to recover my TWRP backup on another phone but I accidentally checked restore also EFS partion from my previous phone.
So the phone just turned on and No service, Baseband unknown. My great mistake.
Tried lots of original ROM restore, reflashing HydraRom or radios/kernels, nothing works.
I read a lot about what i did, I have no backup of EFS partion from the one that has problem. I have only Samsung Box with only IMEI written on it, back cover is changed so there is no IMEI or S/N.
I googled a lot, tried all the programs (Z3x, Chimera, Octopus) but none of them has capability to write IMEI directly to the this N930F phone.
I finally found a software called SAMFIX V1.3 and after clicking Baseband in the HydraRom phone menu is visible
The phone is able to look for carriers (but only one) but had NULL IMEI.
Wifi and Bluetooth works well, but there is no IMEI when i dial *#06# and imei is 0000000000. And Bonus is that the phone acts as Dual SIM, through it is only N930F single SIM. So the phone menu in HydraRom after dialing says 0000 for both IMEIs.
I tried to write IMEI with software IMEI changer via xposed, but it "writes" it only for the system instance.
Phone is still unable to find my carrier of connect to one.
When i tried to see device info with all softwares it says:
PDA Version: N930FXXU2BPJ8
Baseband Version: N930FXXU2BPI5
CSC Version: N930FOXM2BPI5
Please help me to restore EFS somehow, or at least to succesfully write IMEI and S/N (which i don´t really have) to phone and can connect to my network as before my idiosm I did with restoring ROM from "same" but different device.
Who will help me will get 30EUR from me (student) on his PayPal.
Did you tried stock firmware? If not flash N930FXXU3BPL2, and do wipe. https://forum.xda-developers.com/note-7/help/n930fxxu3bpl2-t3520988/page2
Hello!
I tried flashing oficial firmware, didn´t solve my problem, or something called COMBINATION Factory binary but this failed.
Radio and baseband is all OK, I have two other phones exactly with this firmwares and versions and they work all OK.
Problem is with EFS and CERT, before wrongly restoring this partion with TWRP backup from another NOTE 7 SM-N930F the phone worked all OK.
I managed to do with many softwares to write IMEI and S/N and it succeeded!
It is written in CERT file and not only with some IMEI changer for system run instance. It is readable via ADB.
Phone can unlock the SIM card but is unable to load carriers.
I read a lot of this problem and I compared CERT file of a backuped one and CERT on the restored one after my IMEI repair.
The CERT on the recovered one has it´s own IMEI now but has same ImeiSign,PubKey,PubKeySign as the backuped one from what I made restoration with TWRP.
So these codes are OK for the IMEI and S/N on the working one but they are inconert for the not working one because of encrypting.
I tried to flash CERT from the working one to bricked one but this does not work because of some CPID encrypting or so.
Have you please any solution to
1. Fully restore working EFS on the phone to work as before?
2. Try to make calculation for the right ImeiSign,PubKey,PubKeySign for that IMEI?
i have Samsung note 7 n930f
hey how u doing ?
i have Samsung note 7 n930f
and i have on it pie 9 SuperFast9 H5
on it but i have small issue
how to restore my s/n on my samsung sm- n930f
i got the phone with changed s/n
and want restore the original s/n
Hi,
I have a redmi note 5 AI/Global which I've had problems with - it's unable to get a signal with the sim card. It lost the imei numbers (and I'm assuming Baseband) with a TWRP restore where the user tried restoring the efs/modem partitions. The phone does pick up the network, but it doesn't show any reception. The sim card works fine in another phone.
I have:
1. flashed the baseband using the model's qcn using QPST
2. Changed the imei back to default using the imei change tool
It's currently on the latest dev rom. I'd really appreciate some help with it
try to search for qcn for the same model and restore it on your phone, it will work for sure
I've been looking for it, unfortunately I haven't been able to find it - it's M1803E7SG
because your modem file corrupt ,try this method may be can help you... i try this at other phone is work !!
https://www.theandroidsoul.com/fix-...d-wifibluetooth-issues-restoring-twrp-backup/
try last method fastboot erase modemst1 , modemst2 than use miflash flash again your firmware
Download the same fastboot Rom version and flash it via mi flasher, don't forget to choose flash all
qcn
Hello keljian, I want to know if you found the qcn for RN5 M1803E7SG, if so, please share it with me, thanks
Hello i have Global Device 6/128 GB unlocked.
i Successfull flashed xiaomi.eu_multi_MIMAX3_9.7.4_v10-9 Weekly and then i make full BACKUP with TWRP.
All just run fine.
Then i Updated via TWRP c...
Theni testet Ressurection Kernel 6.
After that i cannot use Fingerprint anymore.And cannot delet the Fingerprints that i learned with Phone.
Wiping Cache and Dalvik also didnt Help.
So i thoght its because the Kernel.
So i Dirty flashed again xiaomi.eu_multi_MIMAX3_9.8.1_v10-9 .
After tha the password of my phone didnt match.So i Make full WIPE of my Device "YES" in TWRP. FORMAT DATA.
Then i tryed to Restoere my Backup wich was make with TWRP.But it always Hangs on "SYSTEM Image" and FAILS.
So i tryed to make a new Install with xiaomi.eu_multi_MIMAX3_9.8.1_v10-9.
It boots and i can Use it but my IMEIs from SLOT1 and SLOT2 are "0" ...No imei.
Also it shows no Baseband and no Bluetooth Address.
MAc Adress is Present.
So i searched Internet that i have to restore the EFS Partition.
I done zthis but Imei is again not showing.
Is my Phone now bricked or is there a chance to get my imei back ?
Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.
mierlo420 said:
Try flashing stock fastboot rom with MiFlash.
And if you have a 6/128 model it is a China version, Global version of that model doesn't exist. So if you flash Global fastboot rom keep in mind to choose 'Clean all' instead of 'Clean all and lock' in MiFlash. This is very important because it will brick your phone when done wrong.
Click to expand...
Click to collapse
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...
majo3000 said:
I tryed this. Flashed via MiFlashtool the Global Stable .Did not Help me.
Again no Imei and no Baseband Available.....
Its now on Global Stable 10.3.3.0 ...
Click to expand...
Click to collapse
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319
eliaztheone said:
You need to reflash persist.img that matches your firmware
here is the instructions
https://translate.googleusercontent...Jrhi2V70LG9aacGv6M8dbfpVoZLb1Ew#entry78571590
check even this one out
https://translate.googleusercontent...JrhieUa5tVbP0pu8QSGUm8vr0V5ZN6A#entry79813319
Click to expand...
Click to collapse
this doesnt HELP.
I tryed it in TWRP
But again no EMEI Present after reboot =(
NEED QCN FIle.
After a long search i think i have to do this tutorial.But i need help !
https://www.androidbrick.com/ultima...agon-xiaomi-mi5-imei-and-baseband-repair-fix/
I need a ".qcn" Backup File from another MiMax3 and the "imei" wich belongs to that backup and Phone from another Person.
if have this i can search the "Imei" in backup File and can Add my "IMEI" wich is present on my Phonepacking.
If someone can help me that would be very wonderfull. But better help me on "PN" ....
Tryed really all things.... i think that would help.
Things i tryed : Flash Modem , Flash Firmware , MIflash (fllashall),flash Persist ....and so on.....
Hope someone can help me
Mismo problema
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
kacike69 said:
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Hello, I am in the same situation although worse ... I have a bootloader locked and since I do not have imei I cannot activate my xiaomi account.
In the manual I have read that you are backing up the .qcn file from the phone. I'm wrong? My problem is that I cannot activate the USB diagnostic mode.
Click to expand...
Click to collapse
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?
majo3000 said:
Do you have also a China Version of that Phone and a Global Image was flashed ? 6/128 GB is sure China Version.
Yes i need a .qcn Backup from another Phone with an "imei" Present.then i can add my imei and flash back the qcn file.
I tryed everything.Only thing i didnt is flashing a China Fastboot Rom. Its because i flashed 10.3.3.0 Global ....but at the moment only china 10.3.2.0 is present....
And it will Hardbrick the Device if i try to flash China.I must wait that Version 10.3.3.0 is out.
The thing to enable diag mode is..... i did it with ADB.But i think phone must be rooted.
# adb shell
# su
# setprop sys.usb.config diag,adb
have you tryed to make a clean flash via Miflash with fastboot rom ?
Click to expand...
Click to collapse
I am in the same boat! exact same situation, did you manage to ever solve this?
any one has idea that how i got my phone the unknown baseband. " my phone was in 9008 mode due to rooting & using chinese app which moved my phone to 9008 mode automatically & no way to come back from that hell zone (9008) because it needed an mi auth to flash the whole firmware. really xiaomi ? it should be my phone & with my mi account i should be able to flash but these jerk company wanted to make bucks for their server too. anyway, i flashed with the auth account from some tool & after it my baseband was unknown. what was the reason ? i just upgraded my firmware & that's it. also, i haven't done any efs clear ? anyway to get that baseband back. i tried rooting & diag mode it doesn't work ? i tried the reverse eng firmware but for this model may be it was wrong because after flashing it with eng firmware phone keep rebooting.