Develop Bugs

Clean format, need to install software again!

I was trying to clean install Oxygen OS 4.0 onto my OnePlus 3. I did a huge mistake of formatting my entire data off of my OnePlus 3 using Wipe > Format Data > Yes in TWRP and now I cannot use my phone.
I don't know how to install the OS on the phone again and I am stuck. I don't even have a spare phone right now.
Can someone please help me? I tried checking the other forums, but they were confusing and I didn't understand anything. Please help me.
I tried downloading the software from OnePlus's website, but I couldn't install it through ADB cause the file is for some odd reason corrupt.
Please, somebody help me. I can't even send it back to OnePlus cause I am in a different country ATM.

I had trouble with OB10 and adb. Said it couldn't read the file. I instead flashed TWRP and enabled mtp from there. I then pushed the full ROM to internal storage. Fastboot flashed the stock recovery and used 'upgrade from internal'. That flashed it fine. Then I reinstalled TWRP and SuperSU.

yasinmys said:
I was trying to clean install Oxygen OS 4.0 onto my OnePlus 3. I did a huge mistake of formatting my entire data off of my OnePlus 3 using Wipe > Format Data > Yes in TWRP and now I cannot use my phone.
I don't know how to install the OS on the phone again and I am stuck. I don't even have a spare phone right now.
Can someone please help me? I tried checking the other forums, but they were confusing and I didn't understand anything. Please help me.
I tried downloading the software from OnePlus's website, but I couldn't install it through ADB cause the file is for some odd reason corrupt.
Please, somebody help me. I can't even send it back to OnePlus cause I am in a different country ATM.
Click to expand...
Click to collapse
Have you downloaded the full ROM? Make sure you download the full rom from oneplus's website or any of the mirrors available on various forums on xda. Flash it normally like you flash a custom rom. It will work as I have done it a lot of times. Your file must have been corrupt.

yasinmys said:
I was trying to clean install Oxygen OS 4.0 onto my OnePlus 3. I did a huge mistake of formatting my entire data off of my OnePlus 3 using Wipe > Format Data > Yes in TWRP and now I cannot use my phone.
I don't know how to install the OS on the phone again and I am stuck. I don't even have a spare phone right now.
Can someone please help me? I tried checking the other forums, but they were confusing and I didn't understand anything. Please help me.
I tried downloading the software from OnePlus's website, but I couldn't install it through ADB cause the file is for some odd reason corrupt.
Please, somebody help me. I can't even send it back to OnePlus cause I am in a different country ATM.
Click to expand...
Click to collapse
Go to: h*t*t*p*://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.8/ (REMOVE STARS) download both stock recovery and rom of OOS v3.2.8 (located at the bottom of the page). Flash stock recovery via fastboot (I hope you know how to). After it was flashed, disconnect the cable, turn off the device in fastboot (power off). Then hold power and volume down keys down to boot into recovery. From there ADB sideload the stock OOS v3.2.8. Let it boot up and update to OOS 4.0 via OTA.
P.s. If you need the actual steps, let me know. I'll update it in this post.
nine5raptor said:
I had trouble with OB10 and adb. Said it couldn't read the file. I instead flashed TWRP and enabled mtp from there. I then pushed the full ROM to internal storage. Fastboot flashed the stock recovery and used 'upgrade from internal'. That flashed it fine. Then I reinstalled TWRP and SuperSU.
Click to expand...
Click to collapse
I had an issue with custom twrp + Freedom OS v2.0 (OOS v4.0). No xposed, a lot of battery issues with performance and toggling settings issues too. So I decided to stick with Freedom OS 1.7 (OOS v3.2.8) until OnePlus fixes the issues, with xposed available for Nougat and official twrp being released to support Nougat. Also, whenever I flashed custom twrp, which was recommended by the dev, it always asked me for a password. I did have PIN code with fingerprint option, a pattern option or none at all. All of which did not help bypass it, even using "default_password". I was stuck with OOS v4.0, somehow, with no twrp to work with as it locked my data. I backed my files before flashing from OOS v3.2.8 to OOS v4.0, lucky me. I managed to do what I have explained in the first response.

Installed Lineage 14.1, get messages Hello, I've been trying to install Lineage 14.1

Hello,
[Sorry: can't edit title]
I've been trying to install Lineage 14.1 on my Samsung Galaxy Tab Pro (SM-T520), and haven't been successful.
I keep getting the message "Google Services Framework keeps stopping", sometimes alternating with the message "android.process.media has stopped".
I've used the following installation procedure:
1. Starting with the stock Samsung Android v4.4.2, I used Odin v3.1.2, to root the device, by installing
CF-Auto-Root-picassowifi-picassowifixx-smt520.tar.md
2. I used Odin to install picassowifi TWRP v2.8.7.0. I didn't use the latest v3.1.1-0, because it reboots the
device while making Nandroid backups. Available here
https://eu.dl.twrp.me/picassowifi/
3. I copied several versions of Lineage OS amd Gapps (see below) to the device's SD card
4. I used TWRP to wipe the cache/dalvic/data/system each time, using the Wipe->Advanced option
5. I used TWRP to install the Lineage OS amd Gapps as an atomic operation on the device
6. After installation, I rebooted from TWRP:
- without rooting: I get the message "Google Services Framework keeps stopping"
- with rooting, by installing SuperSU: The device enters into a boot loop, displaying the sliding Lineage logo
I followed the same procedure to update my Samsung Galaxy S4 Mini, and it worked flawlessly.
I tried the following Lineage OS versions, available here:
https://download.exynos5420.com/LineageOS-14.1/n2awifi/
lineage-14.1-20170506-UNOFFICIAL-n2awifi.zip
lineage-14.1-20170715-UNOFFICIAL-n2awifi.zip
I also tried the folowing Lineage OS versions, available here:
https://download.lineageos.org/n2awifi
lineage-14.1-20170608-nightly-n2awifi-signed.zip
lineage-14.1-20170713-nightly-n2awifi-signed.zip
I tried the following versions of Gapps, available here (32-bit arm, Android v7.1, stock variant):
http://opengapps.org/?api=7.1&variant=stock
open_gapps-arm-7.1-stock-20170505.ziip
open_gapps-arm-7.1-stock-20170711
I tried several combinations of these 2 packages. With all the combinations I tried, I got the results summarised above.
This post suggests installing Lineage OS alone without Gapps, and then install Webview Implementation, if not installed:
http://www.lineageosrom.com/2017/02/how-to-fix-google-play-services-error.html
When I tried this and reboot, I get the messages "android.process.media" has stopped, followed by the message "clock has stopped". When I click away these messages, and click on next on the Lineage OS screen, the device enters into a boot loop displaying the sliding Lineage logo. This agrees with the Lineage recommendation, that both packages need to be installed at the same time:
https://wiki.lineageos.org/devices/n2awifi/install
Can anyone please help? I really don't want to go back to Android v4.4.2 on my SM-T520.

Hello so to get rid of the error I would suggest downloading samsung kies 1 not 2 or 3 and flashing completely back to stock then try rooting and flashing rom should get rid of system errors and force closes. Kies will ask you for model and serial number. Serial is found on back of the tablet. As another suggestion I would try resurrection remix by cosmox. It is very stable everything works. I just posted a link in that thread with a link to download samsung kies for a 64 bit windows and other relevant files if you need. Let me know if you need any other help. Also closer inspection of your links. I think for sm-t520 u should be using twrp Picassowifi, not n2awifi so idk if that will work or not. Not sure about that part though because they may have made it work on Picasso.

Thanks paintball.
I confirm that I had used picassowifi TWRP. I've edited the original post to indicate this.
I've also tried what you suggested - I reinstalled the original stock Samsung firmware using Odin, and used TWRP to again install Lineage. Same result, still displaying the same Google Service errors.
I'll look at the Resurrection remix.
Paul

paintball,
I've found a solution, that I thought I'd post here in case anyone else has the same problem.
I wiped the cache/dalvic after each step of the installation:
Wipe-> Advanced -> wipe cache / data / dalvic / system
Install -> flash Lineage -> wipe cache/dalvic
Install -> flash Gapps -> wipe cache/dalvic
Reboot -> don't install SuRoot
I got a Music closed error during the first boot, which hasn't appeared since.
Afterwards, I used Odin to install CF-Auto-Root. The device rebooted twice after this step, but now appears to be OK.
A final problem I had was that it couldn't find my wifi SSID. I solved this by setting wifi region to Europe.

ppmoore said:
Thanks paintball.
I confirm that I had used picassowifi TWRP. I've edited the original post to indicate this.
I've also tried what you suggested - I reinstalled the original stock Samsung firmware using Odin, and used TWRP to again install Lineage. Same result, still displaying the same Google Service errors.
I'll look at the Resurrection remix.
Paul
Click to expand...
Click to collapse
I suggested using Samsung kies which I'm positive works, not Odin, but I'm glad you got it fixed.

ppmoore said:
Hello,
[Sorry: can't edit title]
I've been trying to install Lineage 14.1 on my Samsung Galaxy Tab Pro (SM-T520), and haven't been successful.
I keep getting the message "Google Services Framework keeps stopping", sometimes alternating with the message
<snip>
Click to expand...
Click to collapse
I'm having a similar issue. Mine differs in the following ways.
I was able to successfully install and run LineageOS with OpenGApps full, but reverted to a nandroid backup because I needed some information from the original install. Since then, I have been unable to get past the initial couple of screens for setting things up--and this with the constant "Google Services Framework keeps stopping" error.
I have tried most of the "fixes" I've found but to no avail. I notice that, (1) when I go to the drop-down menu and setup WiFi, as soon as the device connects to the Internet, I go to the Lineage bootup animation and get stuck there. If I hard boot from there, I can get in up to the point where I connect to the Internet (not just router, but actually get through to the Internet) and (2) I cannot enable Developer options--when I try, no matter how many times I click on the Build number, I get no indication of the options being enabled.
I have tried several permutations of Lineage OS nightlies along with various flavors of OpenGApps, with and without root, wiping cache/dalvik/data/system, wiping only some, wiping none.
I also cannot restore the backup of the running LOS that I had up (I did take a backup before going back to the original setup). When I try, I get the same results as above--as if I had backed-up an un-instantiated setup.
Any thoughts?

eckster said:
I'm having a similar issue. Mine differs in the following ways.
I was able to successfully install and run LineageOS with OpenGApps full, but reverted to a nandroid backup because I needed some information from the original install. Since then, I have been unable to get past the initial couple of screens for setting things up--and this with the constant "Google Services Framework keeps stopping" error.
I have tried most of the "fixes" I've found but to no avail. I notice that, (1) when I go to the drop-down menu and setup WiFi, as soon as the device connects to the Internet, I go to the Lineage bootup animation and get stuck there. If I hard boot from there, I can get in up to the point where I connect to the Internet (not just router, but actually get through to the Internet) and (2) I cannot enable Developer options--when I try, no matter how many times I click on the Build number, I get no indication of the options being enabled.
Any thoughts?
Click to expand...
Click to collapse
Hi Eckster,
I have exactly the same problem on a LG G2 with LOS 14.1. It ran July version perfectly but I didn't make a backup and now I'm stuck. Did you ever manage to fix this?
Thanks,
Kevin

Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.

detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
how did you format the partitions? I can only find "format data".. thx

detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
:thumbsup: I was on lineage 14, all was well. I tried an old stock rom NK2, that was fine. I tried to restore lineage backup via twrp, got this problem with the framework crashing. No amount of re-flashing twrp nor lineage, gapps, modem, bootloader, etc nothing worked; always crashed right after boot to lock screen. Finally twrp "format data" - yes. Now lineage boots to welcome, no crash; restore backup - after copying it back to internal - and all is good.
I'm glad it works but why is it needed in this case to remake the filesystem on data - does it work by removing some bad file or does it work by rebuilding the ext4 and security context? this is with latest twrp twrp-3.2.1-0-klte.

Hi,
don't know if you solved it eventually, or maybe helpful for other people with the same problem. I had the same problem, spent 6 days digging around on the internet why the framework keeps stopping and crashing.
I eventually found out that:
- TWRP 3.0.2.0 is WAY more stable than 3.1.1.0 (which never succeeded in installing gapps without crashing)
- Wiping system, data, dalvik recovery and internal storage is not the only thing that needs to be done. You also need to use the 'FORMAT DATA" button (everything will be wiped from your tablet, so, as always, backups )
- After that, install the lineageOS binary, after the installation, wipe dalvik/cache, go back and install the appropriate GApps package, wipe dalvik/cache and reboot
Say whatever you need to whatever deity you prefer and wait for the tablet to boot.
I hope to be of some help to other people having the same problem

Code:
Sent from my SM-S920L using Tapatalk

grammar
detlef25 said:
Managed to solve it. I formatted all partitions _including_ data (which means you'll also loose all zips you wanted to install so make sure that adb is working). Then rebooted into the recovery. Installed as usual, worked.
Click to expand...
Click to collapse
Was going crazy trying to figure out why LineageOS was encountering so many ANRs. The first time I flashed Lineage it worked beautifully but every time after that it just went nuts. This fixed it for me, thanks dude!
Note to others who may end up here, after formating data I had to install a stock ROM, then wipe and install Lineage. Lineage wouldn't install due to Updater process ended with ERROR: 7 which was because there was some bit of information that was on the data partition that showed the install script that the phone was actually a Note II. Formating data blows that info away but installing stock puts it back on.

LievenVanh said:
I eventually found out that:
- TWRP 3.0.2.0 is WAY more stable than 3.1.1.0 (which never succeeded in installing gapps without crashing)
- Wiping system, data, dalvik recovery and internal storage is not the only thing that needs to be done. You also need to use the 'FORMAT DATA" button (everything will be wiped from your tablet, so, as always, backups )
- After that, install the lineageOS binary, after the installation, wipe dalvik/cache, go back and install the appropriate GApps package, wipe dalvik/cache and reboot
Click to expand...
Click to collapse
Coming into this thread after a few hours of struggle with an old GS4 I can say that this method instantly worked for me as well.
Thanks!

Thanks for the help to resolve my issue of installation. Do you have a solution for Zoom , where my audio (cannot hear other speakers) and video is missing. Did enable access for Mic, Camera etc in App permission.

Look at this thread: https://forum.xda-developers.com/ga...-t520-unofficial-lineage-14-1-t3538770/page86 -- last two posts

hamudistan said:
Look at this thread: https://forum.xda-developers.com/ga...-t520-unofficial-lineage-14-1-t3538770/page86 -- last two posts
Click to expand...
Click to collapse
That solution didn't work. My Zoom audio still not working.

Several issues while trying to root pixel c

Hello, I am in need of assistance on rooting/my pixel C device.
I was trying to follow the steps outlined in this webpage: https://forum.xda-developers.com/pixel-c/general/guide-unlock-bootloader-install-custom-t3307183/page27
The tablet by itself had 8.1 to start out.
The steps I did so far is
1. Successfully unlocked the bootloader (the 30 second boot time and the beeping noise)
2. Installed TWRP
3. Installed superSU via TWRP
4. flashed the AOSP kernel from this link https://forum.xda-developers.com/pixel-c/development/rom-t3569215
5. Upon system reboot, I noticed two issues:
Issue 1: The apps is pretty empty, including no google play store. I am guessing this was by design, to keep things simple. In addition, I think the original author was saying to install opengapps manually.
Issue 2: Every time I boot to system, I get the message "google connectivity service stopped" error in the beginning (that wording might not be precise). I was able to connect to wifi and bluetooth with no problem, but maybe the connectivity service is responsible for something else, and it is concerning.
6. Another thing I noticed is an issue is when I boot back into TWRP, my internal storage is 0mb. In research it sounds like I need to implement some sort of passcode, as it might be due to the internal storage being encrypted (although I didn't set up any manual encryption myself).
However, when I boot back into system and look, there is no way to set up a screen lock passcode. There is a method to encrpyt the tablet data, but I didn't pursue that, because it projected a long wait time. (If this will indeed fix the problem I will do so)
If I format data through the twrp system, the internal storage comes back.
7. Nonetheless, I was hoping I can still navigate through the system if I just install opengapps. Therefore, I went to opengapps.org, and chose the arm64, 7.1 stock file to download, as this was the default choice it offered (and I couldn't find 8.1- please let me know what the correct one to install is)
8. I then used adb sideload to install the gapps. (As I couldn't access the internal storage)
9. Now, when I try to reboot to system, the TWRP recovery keeps on coming up, every time. Essentially a TWRP bootloop.
My wish is to just get back to the stock 8.1 os with root. Even if I go through a format erase on twrp, the aosp design defaults. Maybe it isn't completely erased?
I have been working days and nights. Maybe it is because I am a novice and a total newb on the pixel C, but looking everywhere it shows similar yet different suggestions, and hasn't been giving me what I am looking for.
Any insight/advice you can give me will be greatly appreciated.
Thank you for reading my long post.

I think I found the correct gapps just by a Google search. It is unfortunate that they're not just out there in plain view on the OpenGapps site. So you flashed the 7.1 apps, and did you get an error message while trying to flash them via TWRP?
To be quite honest, I had a lot of difficulty rooting and flashing a ROM on the Pixel C, myself. The process took me a couple days. I really had to play around with the drivers and the SDK...the latest wouldn't install to my computer unless I installed it using Android Studio. Once I finally had everything set up right, which I can't even remember how I had it set up, it worked. One ROM I flashed didn't boot, and the Lineage one did. Now, I'm on Resurrection Remix, my favorite ROM ever! Hope this helps!
---------- Post added at 08:05 AM ---------- Previous post was at 08:03 AM ----------
I found a link for some gapps for you
https://sourceforge.net/projects/unofficial-opengapps-8-1/files/arm64/20180227/

sabrdawg said:
I think I found the correct gapps just by a Google search. It is unfortunate that they're not just out there in plain view on the OpenGapps site. So you flashed the 7.1 apps, and did you get an error message while trying to flash them via TWRP?
To be quite honest, I had a lot of difficulty rooting and flashing a ROM on the Pixel C, myself. The process took me a couple days. I really had to play around with the drivers and the SDK...the latest wouldn't install to my computer unless I installed it using Android Studio. Once I finally had everything set up right, which I can't even remember how I had it set up, it worked. One ROM I flashed didn't boot, and the Lineage one did. Now, I'm on Resurrection Remix, my favorite ROM ever! Hope this helps!
---------- Post added at 08:05 AM ---------- Previous post was at 08:03 AM ----------
I found a link for some gapps for you
https://sourceforge.net/projects/unofficial-opengapps-8-1/files/arm64/20180227/
Click to expand...
Click to collapse
Hi, I have a suggestion for ya, You can either flash your tablet with the stock rom : https://developers.google.com/android/images , change the recovery to twrp and root your system with supersu Or you can install lineage 15.1 (oreo) + opengapps oreo 8.1 + supersu/magisk15 don't forget to change the vendor image and the boot image also if you want to have access on your internal storage on twrp. Hope that it will help you.

Thanks guys. Since this time, I was able to try different things and was able to get things rooted and erased using a combination of twrp and the original stock rom.
However, during this process, the TWRP recovery was overwritten with the stock one, and when I try to re-flash the twrp recovery using adb (at the Fastboot, using command: Fastboot flash recovery twrp.img ), command line just stalls with no progress.
Has anybody else encountered this before? Any way to re-flash the twrp file? thanks in advance.

ADB Sideload of Lineage OS fails at 47%

Hey everyone,
I've been trying to install Lineage OS on my Moto Z2 Force for about two months now and I'm starting to get pretty desperate
Every time I try to sideload Lineage via ADB (after flashing TWRP), the sideload fails at 47% stating "Total xfer: 1.00x". I tried half a dozen different versions of Lineage nightly for nash (15 and 16) but the result was always the same. I wasn't able to find a solution to my problem on the internet so I'd love for you to share your thoughts on this!

vincetoxicum said:
Hey everyone,
I've been trying to install Lineage OS on my Moto Z2 Force for about two months now and I'm starting to get pretty desperate
Every time I try to sideload Lineage via ADB (after flashing TWRP), the sideload fails at 47% stating "Total xfer: 1.00x". I tried half a dozen different versions of Lineage nightly for nash (15 and 16) but the result was always the same. I wasn't able to find a solution to my problem on the internet so I'd love for you to share your thoughts on this!
Click to expand...
Click to collapse
Awhile back I tried los, but I was having trouble with sideload too. I ended up just flashing it in twrp like a regular rom. Others who use los more and have more experience with it might have a better answer for you, but that worked for me. Just make sure that you have the base firmware required installed, and don't forget to format data.

Normally working fine. Read carefully the manual from lineage.org and learning by doing. Read the changelogs, too. That's helpful and read so much ypu can about A/B partion and if then working, don't update over Updater for few days. There is a bug, which is in the next days be fixed. So, you must invest some time to understand all. Here it was not easy, too. Maybe 2 days to learn from mistakes. Then you get it working.

41rw4lk said:
Awhile back I tried los, but I was having trouble with sideload too. I ended up just flashing it in twrp like a regular rom. Others who use los more and have more experience with it might have a better answer for you, but that worked for me. Just make sure that you have the base firmware required installed, and don't forget to format data.
Click to expand...
Click to collapse
Thank you for your reply! So what exactly would you propose I do? Wipe with TWRP first, then return to Fastboot and flash los from there?
Before booting I'd like to install an open gapps package which must be done before booting los for the first time. Could I do that via Fastboo as well?

vincetoxicum said:
Hey everyone,
I've been trying to install Lineage OS on my Moto Z2 Force for about two months now and I'm starting to get pretty desperate
Every time I try to sideload Lineage via ADB (after flashing TWRP), the sideload fails at 47% stating "Total xfer: 1.00x". I tried half a dozen different versions of Lineage nightly for nash (15 and 16) but the result was always the same. I wasn't able to find a solution to my problem on the internet so I'd love for you to share your thoughts on this!
Click to expand...
Click to collapse
Just flash it through twrp like a normal rom I have never heard of anyone sideloading a custom rom. If you're using a carrier variant of the Moto Z2 Force that may give you some issues too.

Hybrid Theory said:
Just flash it through twrp like a normal rom I have never heard of anyone sideloading a custom rom. If you're using a carrier variant of the Moto Z2 Force that may give you some issues too.
Click to expand...
Click to collapse
The wiki says to sideload for a reason -- you can bungle up FBE encryption keys by storing stuff in TWRP on a device where FBE decruption in TWRP is attempted (nash).
vincetoxicum said:
Thank you for your reply! So what exactly would you propose I do? Wipe with TWRP first, then return to Fastboot and flash los from there?
Before booting I'd like to install an open gapps package which must be done before booting los for the first time. Could I do that via Fastboo as well?
Click to expand...
Click to collapse
Follow the wiki description - it's a TWRP bug that sideload only goes to 47% - though it has actually suceeded. It would turn red and say "Failed" if it failed.
41rw4lk said:
Awhile back I tried los, but I was having trouble with sideload too. I ended up just flashing it in twrp like a regular rom. Others who use los more and have more experience with it might have a better answer for you, but that worked for me. Just make sure that you have the base firmware required installed, and don't forget to format data.
Click to expand...
Click to collapse
See above - it didn't fail.

Because of the A/B partition, you can only install through a temporary twrp. If you try permanent twrp, you won’t be able to boot

Same problem with Lineage Recovery. Followed exactly the wiki but it stays the same 15.1 version.

I'm on T-Mobile and I ALWAYS had that problem, totally forgot about it at this point. Just ignore it, the rom is flashes successfully anyway

Dany XP said:
I'm on T-Mobile and I ALWAYS had that problem, totally forgot about it at this point. Just ignore it, the rom is flashes successfully anyway
Click to expand...
Click to collapse
Well, but after reboot the new rom is not flashed or active (might be in one of A/B but no switch of slots).

carlos22b said:
Well, but after reboot the new rom is not flashed or active (might be in one of A/B but no switch of slots).
Click to expand...
Click to collapse
You might be right but last time I fastboot flashed anything was some time ago. Maybe after flashing I had to manually switch slot? I don't remember. I'm in Lineage 16 and is working great

Dany XP said:
You might be right but last time I fastboot flashed anything was some time ago. Maybe after flashing I had to manually switch slot? I don't remember. I'm in Lineage 16 and is working great
Click to expand...
Click to collapse
Ok. How can I change the slot manually?

carlos22b said:
Ok. How can I change the slot manually?
Click to expand...
Click to collapse
Of course, there Is a fastboot command for that, very simple. Just google it

Changed it so slot b - now bootloop in both a and b
This A/B system is really no help for custom roms...
Now try to flash with temporary twrp.

Same here.
Device: sweet TWRP: 3.6.1 and 3.6.2
Bash:
adb sideload CARBON-CR-9.0-R-WEEKLY-sweet-20230501-0124.zip
serving: 'CARBON-CR-9.0-R-WEEKLY-sweet-20230501-0124.zip' (~47%)
adb: failed to read command: Success
ROM flashed, booted, and seem to work fine.
EDIT:
It is normal. Found this:
https://www.reddit.com/r/LineageOS/comments/af12lu/_/edvwaex
That's an ADB issue, nothing is wrong with the device, cable, PC or the installation process.
If I remember correctly (from a discussion long ago), Google's ROMs are transferred about 2.2 times across the sideload. To make the progress bar add up to 100%, they said "2.2 times the file size equals 100%". Our ZIPs are transferred just once, so the final progress is at about 47% with a success. The xfer seems to show the transferred data compared to the file size. Ours clocks in at x1.00 or x1.01, while Google's is about x2.something.
Click to expand...
Click to collapse

Re-Root? Possible partition messup, Lost root now stuck in fastboot

Hello, Sorry to bug you guys...I read multiple different fourms/how2s and I guess I'm a little mixed at what i should do. I Have the oneplus 7t (hd1505) with android 11 rooted, and after that I installed NikGapps after I had it rooted, then flashed nethunter. Was in the terminal as root, all was well..I believe It rebooted and would'nt boot to rom so i went and re'did magisk, may have used a different patched magisk? but now is stuck fastboot. Cant get it to boot.
Sorry for the maybes but I had brain surgry and my memories not the best. Everything was going fine so I didn't document things like normal. Anyways, Is there a program that helps with thiss? MSM somthing? or could anyone please point me in to a nice how2 or some quality links to assist? I really apprricate it, normally I'd just test till I get it, but I think I may be at a point where I could really mess it up.

5k1tz0 said:
Hello, Sorry to bug you guys...I read multiple different fourms/how2s and I guess I'm a little mixed at what i should do. I Have the oneplus 7t (hd1505) with android 11 rooted, and after that I installed NikGapps after I had it rooted, then flashed nethunter. Was in the terminal as root, all was well..I believe It rebooted and would'nt boot to rom so i went and re'did magisk, may have used a different patched magisk? but now is stuck fastboot. Cant get it to boot.
Sorry for the maybes but I had brain surgry and my memories not the best. Everything was going fine so I didn't document things like normal. Anyways, Is there a program that helps with thiss? MSM somthing? or could anyone please point me in to a nice how2 or some quality links to assist? I really apprricate it, normally I'd just test till I get it, but I think I may be at a point where I could really mess it up.
Click to expand...
Click to collapse
If you don't care about data then use msm tools to factory restore. Or you can flash boot image of the rom you were using (unpatched) in fastboot mode itself.

No need to keep data, I'd prefer to wipe device and start fresh instead of getting stuck on the concept of A/B partitions. I get the CMD getvar, but I'm not sure if i flashed the lineage OS to one or both...at 1 point i think i was booted in A, now its saying B. I got overeager and downloaded multiple ROMs and not sure which one worked. In the past I usually downloaded a few and the first one to work I used. Not smart...I know. If I wanted to wipe all and start fresh with gaspps and root, where/how should I do that? I can't just fasatboot oem unlock , could I? Would you recommend stock OS? Lineage? Thanks for your help BTW.

5k1tz0 said:
No need to keep data, I'd prefer to wipe device and start fresh instead of getting stuck on the concept of A/B partitions. I get the CMD getvar, but I'm not sure if i flashed the lineage OS to one or both...at 1 point i think i was booted in A, now its saying B. I got overeager and downloaded multiple ROMs and not sure which one worked. In the past I usually downloaded a few and the first one to work I used. Not smart...I know. If I wanted to wipe all and start fresh with gaspps and root, where/how should I do that? I can't just fasatboot oem unlock , could I? Would you recommend stock OS? Lineage? Thanks for your help BTW.
Click to expand...
Click to collapse
Go to this thread for MSM Tool download and instructions: Unbrick tool to restore your device to OxygenOS