Related
At first I tried to update my existing TWRP (3.2.1-0) to the 3.2.1-2 variant. It flashed ok, but then the phone would only boot to TWRP (reason for upgrade is that 3.2.1-0 would hang). I was attempting initially to put myself on the path to a "custom rom". When this failed, I manually flashed the latest google firmware from their page and it still will not do anything other than fastboot mode. No recovery, no firmware load. When I try to do the flash-all.bat method now, all I get after it loads the archive contents is "error: Cannot generate image for userdata. Guess I got a $1000 brick at this point?? Image from the PC screen included.
See if this thread helps.
https://forum.xda-developers.com/pi...ory-image-flashing-fails-t3715350/post7649698
I am going to have to find another way to look at that thread. My ipad is getting directed to some HTC desire article about and orange and black theme.
I have tried so far very unsuccessfully to wipe everything by booting to twrp via fastboot method. Then I used the dueces script to reflash everything completely (both partitions). No matter whether I flash complete stock or flash magisk and verizon radio files, it just hangs on the white google screen now and that is as far as I have gotten. Left it at home in this mode hoping it will clear.
JoeNeckbone said:
See if this thread helps.
https://forum.xda-developers.com/pi...ory-image-flashing-fails-t3715350/post7649698
Click to expand...
Click to collapse
That link is bad. Three devices are going to an htc desire theming page.
remove the -w from the update line in flash-all.
I have got the same problem since yesterday and search for a solution.
ctradio said:
That link is bad. Three devices are going to an htc desire theming page.
Click to expand...
Click to collapse
Not sure what happened with link, https://forum.xda-developers.com/pi...ry-image-flashing-fails-t3715350/post74751631
new adb dont help for me. I cannot flash slot a and change to b and got the error message that no slot is supported.
Still need help? Have you tried Skipsoft? Sure its not been updated but it might beable to help ..
Where fastboot flashing failed for me one time it got me out of a hole....
Otherwise i can try and remote and help... BTW its not finding the userdata file in the fastboot side... Something isnt right hence why it cant create the userdata file...
I try to boot with skipsoft to temp twrp but stuck on boot.img loading. the flashed twrp stuck on twrp logo and before I have changed from slot b to a inside twrp i can boot. now I cannot flash inside fast boot or delete anything.
Have you guys tried Deuces Bootloop Recovery & Flashing Script? I'd imagine you'd run into the same issues as the script runs a lot of the same fastboot commands...but it has worked wonders for many other users so......
I also might try re-downloading the factory image and comparing the Checksums to make sure you have a whole exact download just in case that's getting in the way of properly generating the userdata image. I'd also suggest making sure you have more than 4GB of space on your C drive; I was getting similar messages about not finding or not generating system images because they couldn't be fully extracted (temporarily) because I didn't have sufficient temp space on my C drive.
But I had encountered this issue before. It was either userdata or system_other partition. I did attempt to fastboot erase and fastboot format those partitions and other tweaks; even messed with changing the size of the partition (you might have better luck). What I seemed to conclude is that I was flashing the wrong month's Full Factory image; i.e. I was manually flashing system_other image from February when the whole phone was still on January. But I believe what I ended up doing was flashing a Full Factory image with the "-w" intact; therefore, if you still have access, you should copybackcup (via TWRP or adb pull) your internal storage (/sdcard and-or /data/media) and simply flash a Full Factory image with wipe option enabled...
Just some thoughts and suggestions...hope this helps...
I figured it out finally. Even though my ADB/Fastboot tools were a later creation date than the ones posted online, the ones online worked great. Even used the dueces script to ensure the junk is gone. Thanks all! Hate pesky gotchas like that!!
I'm about 4 hours of reading in on this matter, and I still don't have a proper answer. I've run through countless threads with similar titles, and found some helpful tidbits, but nothing the resolves or fully explains what is going on here.
I just made the jump from Android 9.0.0 (latest) rooted to Android 10.0.0 (latest.) Here were my steps:
Download the latest Platform Tools & unzip
Download the latest Android 10.0.0 Factory image for Pixel 2 XL & unzip into the platform tools folder
Download the latest USB drivers & install
Hook up my phone to the computer (Windows 10) and verify that ADB & Fastboot are working properly via command prompt
Execute the flash-all.bat (left the -w flag in so that it wiped my data) -- it appeared to be only flashing the one slot except for a couple mentions of the other slot's system towards the end of the commands
The phone booted just fine and I went through and installed TWRP and Magisk 23 and so on
Here's where I encountered the error:
As I was rebooting out of TWRP, I realized I'd never used the "Slot A" or "Slot B" buttons, so I picked one, and it started rebooting the phone. The normal screen with the yellow text about phone being unlocked came up, then switched to the white background with the 'G' as expected. The expected next step would've been the 'G' spinning into a circle for a second, and then going to the homescreen, but instead what happened was the screen went black, and then a screen that said "Your device is corrupt. It can't be trusted and may not work properly." showed. It looked similar to the one when the phone first boots with the yellow text about the bootloader, but this text was red. I attempted to use the power button to bypass it, and when I did, it switched the the normal yellow-text-about-bootloader screen, and then switched to the 'G' with the white background again, but there it stayed, just frozen.
I was still able to boot to bootloader by using the power + down button, and could then boot to the stock recovery, but that was it. After a bit of reading, I discovered the following command:
fastboot set_active a
or
fastboot set_active b
and also fastboot getvar all
The set_active command chooses which Slot is being used, and the getvar command shows all the fastboot variables, one of which shows the "current_slot." Once I set the other Slot to be the active one and rebooted, the phone booted normally. Buuut, now I'm concerned that someone is screwed up with my phone, and it's going to fail at some point when I don't have my computer handy, so I went back to work trying to resolve the error when I booted out of the one slot.
Here's what I've tried:
Run the flash-all.bat file in one slot, let the phone reboot, boot to bootloader, switch slots, reboot to bootloader, flash-all.bat in the other slot.
Same as above, but without the -w flag.
Manually flash the bootloader, radio and image zip on both slots
Install the TWRP while booted into the adb-loaded TWRP img (this seems to write to both slots based on the output)
Install and uninstall Magisk both via recovery and via the patched stock boot image.
After every single attempt, the one slot would work just fine, and the other slot would exhibit the behavior I mentioned. Depending on which Slot is flashed first, the Slot that fails to boot properly does change (ie. it's not always Slot A or Slot B that fails.)
Untested methods:
Screwing with dm-verity -- I saw one thread that gave a few fastboot commands to disable dm-verity, and a couple people reporting success with it. After searching around and doing a bit of reading on dm-verity, I still don't understand what it does, whether disabling it would have any negative repercussions, and whether disabling it would fix the issue legitimately, or just kinda mute it.
Using Deuce's bootloop recovery tool -- again, I don't really know what that thing is running, it hasn't been maintained in quite some time as far as I can tell, and there are several threads indicating that it runs a bunch of haphazard stuff that could cause more problems. Some reports indicated it worked for them, but I'm concerned about what else it might be doing that may negatively affect things down the road.
Re-locking the bootloader -- I saw this one mentioned several times, but I also saw several people warning that you could brick your phone if you do it wrong. I also saw one or two folks who seemed like they couldn't get back to being unlocked after re-locking. I don't want to screw with this option given those risks.
Can anyone give me any more tips on how to resolve this? I'm pretty sure that the Pixels are supposed to run equally well from both slots, so I'd really like to get the matter resolved so I don't have to worry about what would happen if my phone moved me over to the other Slot for some reason. Any insight and explanations are appreciated!
People say that you cannot install both TWRP and magisk (I haven't tried it myself). So start again with a flash-all, and then, instead of installing TWRP, run it using fastboot boot whenever you need it.
The OP needs to flash a factory image first or the corruption message will never disappear. While he's at it he should make the jump to Android 11...latest radios and all that. If he doesn't want to lose data he can edit flash-all.bat in the factory image and remove the -w flag in that batch file.
From there he can flash anything he wants. If he plans on rooting however he cannot install TWRP, only boot it using ADB. The combination of Magisk and TWRP causes a bootloop.
runekock said:
People say that you cannot install both TWRP and magisk (I haven't tried it myself). So start again with a flash-all, and then, instead of installing TWRP, run it using fastboot boot whenever you need it.
Click to expand...
Click to collapse
The problem presents with even the stock boot image though.
Strephon Alkhalikoi said:
The OP needs to flash a factory image first or the corruption message will never disappear. While he's at it he should make the jump to Android 11...latest radios and all that. If he doesn't want to lose data he can edit flash-all.bat in the factory image and remove the -w flag in that batch file.
From there he can flash anything he wants. If he plans on rooting however he cannot install TWRP, only boot it using ADB. The combination of Magisk and TWRP causes a bootloop.
Click to expand...
Click to collapse
Understood on the magisk / twrp thing, but regarding the factory image, that is exactly what I was going. The problem presents even after doing that. That's why it's so puzzling.
Edit: it's admittedly a very long post, but if you look at the section that's numbered, you'll see I'm grabbing the latest factory image for Android 10 and flashing it. Then in the section labeled "Here's What I've Tried" (aka my attempts to troubleshoot) the very first thing I did was flash the factory image (including the wipe) to both Slots and then trying to boot from one slot and then from the other.
Grab an Android 11 package and don't remove the -w flag when installing. The corruption may be persisting because user storage isn't being wiped.
The factory image - NOT OTA - is the only way to fix this short of sending the device to Google for service.
Strephon Alkhalikoi said:
Grab an Android 11 package and don't remove the -w flag when installing. The corruption may be persisting because user storage isn't being wiped.
The factory image - NOT OTA - is the only way to fix this short of sending the device to Google for service.
Click to expand...
Click to collapse
Why would it be any different when I wipe with Android 10 or Android 11? I flashed the latest Android 10 factory image to the phone *with* the -w flag as mentioned in my "here's what I tried" section. I even went so far as to force the phone to Slot A with the "set_active" command, and then set_active Slot B and flashed the factory image (not the OTA) again. After doing that, the one slot will boot just fine while the other gives the error. If I change it up and flash Slot B first and then Slot A the same thing occurs, just in reverse (the slot that booted before throws the error while the slot that threw the error before now boots.)
My initial post explains why I recommended an Android 11 ROM (updated radio). Any of them will of course work, but that's beside the point. Try using ADB to format the partitions and see if that resolves the issue. Otherwise contact Google, as I can't think of anything else that would be blocking you.
I had this same issue and Flashing Android 11 on both partitions (without removing the -w command) resolved it.
I first booted into Recovery Menu and wiped both slots. Then downloaded the factory image (not ota) and flashed each slot separately wiping the device after each flash in recovery menu. it's the only way to fix this just like user @Strephon Alkhalikoi
If that doesn't resolve it then you have an issue that's more serious and will require a repair of some sort (not necessarily hardware).
Good Day All, I've seen a few thread regarding this but nothing stating what causes it to happen. Can anyone provide any insight?
I was about to perform a reflash of my rom but didn't even reach that far.
I restarted phone to recovery
Was going flash a firmware before the rom flash but decided to switch from slot a to b cuz i wasn't sure if the firmware is a global thing or per slot
Changed slots and restarted to recovery
Noticed no prompt for decryption key and my data/media was gone.
Changed slots again without doing anything and restarted (TWRP prompted no OS found)
After the recovery started again no prompt for decryption key again and no data
Figured twrp loaded badly or something. Restarted to recovery one more time
Phone did not boot to recovery. Keep bootlooping to fastboot
Attempted to reflash TWRP when I encounted the error "Failed to load/authenticate boot image"
After a quick google the solution seemed to be the flash over the stock rom via miflash and start over which I unfortunately did
While the solution worked. Does anyone have any clue why this might've happened so I can avoid it in the future? I don't think the Rom matters but I was running Arrow-v12.1-alioth-OFFICIAL-20220819-VANILLA.zip and the recommended firmware V13.0.4.0.SKHMIXM
Hello guys, I recently formatted data on my phone to fix a bootloop I had. After fixing everything, SIM card and wifi was not working, I downloaded the Official Stock ROM of my phone and flashed bluetooth, modem, dsp and dtbo. The original plan was to run "flash_all_except_storage.bat" but that kept throwing errors. After I flashed those things I booted successfully and unlocked my phone. Problem is Wifi still doesn't work. So once again got into fastboot, tried running "flash_all_except_storage.bat", once again it threw an error, so I restarted my phone and ever since I can't boot into system. Whenever I restart it goes straight into fastboot, Power off and on again goes to fastboot, I can boot into TWRP, rebooting from there still goes into fastboot mode. I fix a problem and 2 more take it's place, I really need your help here.
Thanks a lot !
Edit:
Fix Attempt 1 (FAILED): I tried formating data through TWRP as I read online, it did not work
Attempt 2 (FAILED): Used
Code:
fastboot continue
and got this error:
Code:
Resuming boot FAILED (remote: 'Failed to load image from partition: No Media')
fastboot: error: Command failed
Attempt 3 (HALF FIX): After some digging I realized after a failed attempt to run "flash_all_except_storage.bat", the boot was erased. I tried flashing only the boot.img and the phone booted up with the wifi working as well. Problem is after a reboot I go back into fastboot and I have to flash boot.img again to boot into system.
Here is recovery.log Pastebin
Leonniar said:
Hello guys, I recently formatted data on my phone to fix a bootloop I had. After fixing everything, SIM card and wifi was not working, I downloaded the Official Stock ROM of my phone and flashed bluetooth, modem, dsp and dtbo. The original plan was to run "flash_all_except_storage.bat" but that kept throwing errors. After I flashed those things I booted successfully and unlocked my phone. Problem is Wifi still doesn't work. So once again got into fastboot, tried running "flash_all_except_storage.bat", once again it threw an error, so I restarted my phone and ever since I can't boot into system. Whenever I restart it goes straight into fastboot, Power off and on again goes to fastboot, I can boot into TWRP, rebooting from there still goes into fastboot mode. I fix a problem and 2 more take it's place, I really need your help here.
Thanks a lot !
Edit:
Fix Attempt 1 (FAILED): I tried formating data through TWRP as I read online, it did not work
Attempt 2 (FAILED): Used
Code:
fastboot continue
and got this error:
Code:
Resuming boot FAILED (remote: 'Failed to load image from partition: No Media')
fastboot: error: Command failed
Attempt 3 (HALF FIX): After some digging I realized after a failed attempt to run "flash_all_except_storage.bat", the boot was erased. I tried flashing only the boot.img and the phone booted up with the wifi working as well. Problem is after a reboot I go back into fastboot and I have to flash boot.img again to boot into system.
Here is recovery.log Pastebin
Click to expand...
Click to collapse
Can you flash full rom with mi flash tool
Rares6567 said:
Can you flash full rom with mi flash tool
Click to expand...
Click to collapse
Already did, it didn't work...
Leonniar said:
Already did, it didn't work...
Click to expand...
Click to collapse
Maybe is some motherboard issues?
I don't believe so. The problem I originally had was that after a restart the phone was booting into fastboot. But if I didn't restart the phone was working fine, cellular, wifi google services everything. So in order to fix that I flashed the full stock rom and that's how I ended up in the restart loop in the first place.
https://forum.xda-developers.com/t/decrypting-xiaomi-mi10t-pro-internal-storage.4544271/page-2#posts
Here are all the details, I started from a completely different problem and ended up here. They entire process I took is in that thread
Leonniar said:
I don't believe so. The problem I originally had was that after a restart the phone was booting into fastboot. But if I didn't restart the phone was working fine, cellular, wifi google services everything. So in order to fix that I flashed the full stock rom and that's how I ended up in the restart loop in the first place.
https://forum.xda-developers.com/t/decrypting-xiaomi-mi10t-pro-internal-storage.4544271/page-2#posts
Here are all the details, I started from a completely different problem and ended up here. They entire process I took is in that thread
Click to expand...
Click to collapse
There is no volume buttons problem?
If no maybe you should reflash whole phone, fastboot, recovery, all, using edl ig.... I don't have this phone or any Snapdragon phone, so I don't really know....
Yeah I did, I used the flash_all.bat that comes with the ROM file and pretty much replaced everything. I tried to run it a couple of times and it failed mostly but I was able to run it twice I think (without changing anything, just running it again and again at some point it worked)
Leonniar said:
Yeah I did, I used the flash_all.bat that comes with the ROM file and pretty much replaced everything. I tried to run it a couple of times and it failed mostly but I was able to run it twice I think (without changing anything, just running it again and again at some point it worked)
Click to expand...
Click to collapse
So then why your phone goes to fastboot?
I really don't know, after running flash_all the second time now my phone is stuck in a restart loop. Shows the MI logo and restarts. I can manually boot to recovery or fastboot but if I leave it on it's own it keeps turning on and off
Leonniar said:
I really don't know, after running flash_all the second time now my phone is stuck in a restart loop. Shows the MI logo and restarts. I can manually boot to recovery or fastboot but if I leave it on it's own it keeps turning on and off
Click to expand...
Click to collapse
It seems that this a software bug ig, can you try go to recovery and flash the rom?
I could try but I am not sure how to do that. My rom comes in a .tgz format and not .zip and all guides mention you need a .zip file
Leonniar said:
I could try but I am not sure how to do that. My rom comes in a .tgz format and not .zip and all guides mention you need a .zip file
Click to expand...
Click to collapse
So where u downloaded the fastboot rom, there is a recovery rom too :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
Be sure u download the recovery rom not fastboot.
Btw use your miui version u had
Tho I'm not 100% sure if you flashed the fastboot rom correctly, did u :
1. Open MiFlashTool : download the tool from here if you don't have it ---> https://xiaomiflashtool.com/
2. Select your rom ( make sure your path to the rom isn't long and the folder/folders don't have long names )
3. Connect your phone
4. Click Refresh ( to make your device appear)
5. And click flash
I didn't do it with MiFlashTool because it kept throwing errors at me whenever I launched it so I tried the flash_all.bat batch file that runs cmd commands and flashes everything. the ROM I installed was the fastboot version. The official website on the recovery ROM stated that "This page shows a single update only" so I assumed it's just an update and not the full ROM. I was also told I should use the fastboot variant in the above mentioned thread
Leonniar said:
I didn't do it with MiFlashTool because it kept throwing errors at me whenever I launched it so I tried the flash_all.bat batch file that runs cmd commands and flashes everything. the ROM I installed was the fastboot version. The official website on the recovery ROM stated that "This page shows a single update only" so I assumed it's just an update and not the full ROM. I was also told I should use the fastboot variant in the above mentioned thread
Click to expand...
Click to collapse
Ok so to fix the error : go to miflashtool folder and create a new folder called : log
Fixed the start up error, I get the screen that says "Please install driver", I press Install and I get this:
https://prnt.sc/I53g6bs_8i5w
Pressing ok gets me back to the "Please install driver" screen
Well I just closed the Install driver window and flashed as is, I got this:
https://prnt.sc/Bk2eaj9w5Lq7 so presumably it failed but my devices rebooted and is now on system set up
Edit:
3 reboots later and phone still boots fine to system
Rares6567 said:
It seems that this a software bug ig, can you try go to recovery and flash the rom?
Click to expand...
Click to collapse
flashing miui_APOLLOEEAGlobal_V12.5.4.0.RJDEUXM_451a2324af_11.0.zip from stock recovery is good idea, you can do this from MicroSD card to circumvent any usb issues you are obviously facing on fastboot.
Leonniar said:
Well I just closed the Install driver window and flashed as is, I got this:
https://prnt.sc/Bk2eaj9w5Lq7 so presumably it failed but my devices rebooted and is now on system set up
Edit:
3 reboots later and phone still boots fine to system
Click to expand...
Click to collapse
So it worked?
This "error" isn't an "error" so don't worry about it
Leonniar said:
Well I just closed the Install driver window and flashed as is, I got this:
https://prnt.sc/Bk2eaj9w5Lq7 so presumably it failed but my devices rebooted and is now on system set up
Edit:
3 reboots later and phone still boots fine to system
Click to expand...
Click to collapse
This error is normal since you are not re-locking the bootloader.
If some functions are inoperative.
Try to flash the same rom (fastboot) that you had when you bought the phone, probably an A11.
Use clean all(flash_all.bat).
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
So I messed up when i was trying to move from a calyxos image to ubuntu touch on my 3aXL. I started the flash with ubports installer but i didnt put the factory image on it first. I've since tried to get a factory image working on it and the 9.0 image touch wants before their install. not having any luck with this. on the android flash tool when loading the factory image it fails with a connection error issue (there is not physical connection problems) verified on multiple pc's.
Problems:
USB debugging was not enabled when the phone did have a boot-able image on it
there is some form of UBports recovery image on it
ADB does see the recovery image but in sh most dirs seem to be empty or currupt
The Good:
bootloader is unlocked
FYI I'm no dev just an idiot that breaks things. any help is appreciated Tanks!
as long as bootloader is unlocked just flash from fastboot.
https://developers.google.com/android/images#bonito
got it running again Tanks!