Related
Currently, Ventriloid and Mangler are non functional for the Android JB firmware. Although the Ventriloid dev has posted a temp fix in the app description, it crashes alot and will not serve much use for me. Is it possible for someone to post a fixed app or a way to access vent on JB?
Store link:
https://play.google.com/store/apps/details?id=com.jtxdriggers.android.ventriloid&hl=en
Temporary fix link:
https://code.google.com/p/ventriloid/downloads/list
Buuump. I totally need this, and many do aswell.
Metal Slug said:
Buuump. I totally need this, and many do aswell.
Click to expand...
Click to collapse
Ventriloid dev here. What issues are you having with the test version on the site? I just finished up my semester at school and will hopefully have an official release out by January, but I need some help testing.
Ventrilo for JB not working?
jtxdriggers said:
Ventriloid dev here. What issues are you having with the test version on the site? I just finished up my semester at school and will hopefully have an official release out by January, but I need some help testing.
Click to expand...
Click to collapse
Just wanted to jump in and mention that I am having issues too. Samsung SII, cm10. When I start ventriloid is initially says connecting, but then very often goes back to mobile's home screen. It then leaves a notification bar entry saying that it is connected. When you click on that, it does its two vibrates and goes off entirely. Sometimes I can get it going again, but is very fiddly. Dont know if this helps. Hope so.
London Lad
LondonLad said:
Just wanted to jump in and mention that I am having issues too. Samsung SII, cm10. When I start ventriloid is initially says connecting, but then very often goes back to mobile's home screen. It then leaves a notification bar entry saying that it is connected. When you click on that, it does its two vibrates and goes off entirely. Sometimes I can get it going again, but is very fiddly. Dont know if this helps. Hope so.
London Lad
Click to expand...
Click to collapse
Hey LondonLad, thanks for the report.
Are you using the Play Store version of the app or the Alpha on my Google Code?
jtxdriggers said:
Hey LondonLad, thanks for the report.
Are you using the Play Store version of the app or the Alpha on my Google Code?
Click to expand...
Click to collapse
Playstore version.
LondonLad said:
Playstore version.
Click to expand...
Click to collapse
Go try out the Alpha at ventriloid.googlecode.com in the downloads section and let me know how it works for you. I apologize for any lack of features in that version but it's a huge work in progress.
jtxdriggers said:
Go try out the Alpha at ventriloid.googlecode.com in the downloads section and let me know how it works for you. I apologize for any lack of features in that version but it's a huge work in progress.
Click to expand...
Click to collapse
Have downloaded and it seems to work well. (Did loose the Ventriloid icon though!) One comment: One must tick the box Enable Global Push to Talk in order to see key. That is fine, but it does cover up part of you keyboard if you, for example, need to type in a password for a channel. Not a problem, but thought I would at least mention it.).:good:
LondonLad said:
Have downloaded and it seems to work well. (Did loose the Ventriloid icon though!) One comment: One must tick the box Enable Global Push to Talk in order to see key. That is fine, but it does cover up part of you keyboard if you, for example, need to type in a password for a channel. Not a problem, but thought I would at least mention it.).:good:
Click to expand...
Click to collapse
I'm glad it's working for you I'm working on a complete UI overhaul and that global push to talk was more or less a proof of concept for being able to talk outside of the app. Android has limitations for hardware key interception that won't allow push to talk while the app is in the background, so hopefully people will enjoy this new button. It will eventually be a bar with other options that can be hidden. Thanks so much for testing, I'm glad the ICS/JB fix is working.
jtxdriggers said:
I'm glad it's working for you I'm working on a complete UI overhaul and that global push to talk was more or less a proof of concept for being able to talk outside of the app. Android has limitations for hardware key interception that won't allow push to talk while the app is in the background, so hopefully people will enjoy this new button. It will eventually be a bar with other options that can be hidden. Thanks so much for testing, I'm glad the ICS/JB fix is working.
Click to expand...
Click to collapse
Thank you for your work on this. It is helping a lot of people! (I will make a donation shortly.)
LondonLad said:
Thank you for your work on this. It is helping a lot of people! (I will make a donation shortly.)
Click to expand...
Click to collapse
I greatly appreciate it I need to get a Bluetooth headset for testing, but Christmas and next semester's tuition has completely drained me haha. Let me know if you have any other issues or feature requests!
Smart Screen
Simple application with two powerful features Smart Stay & Smart Widgets
Smart Stay :
"It waits till you're done"
The screen maintains a bright display as long as you're interacting with it.
Smart Widgets :
"It learns you're applications usage"
Displays "Most Launched,Most Recently Launched and Most Addicted" applications
on the home screen (widget),click on the App icon to launch
https://play.google.com/store/apps/details?id=com.dondeti.smartscreen
11/6/2015
Android M support
Nice app
Great app man, it works fine. But i think it should let the user select which app to make use of the function.
Thank you for the feedback
and i'm very happy to hear back..i'm working on it..will bee out soon...!
Will be updating to a new version before October 2nd
this will have features of a pro version but it just gives the feel not the functionality
Please let me know your comments
@MultiPDev V2 will give you the option to select your own app
ravitez86 said:
@MultiPDev V2 will give you the option to select your own app
Click to expand...
Click to collapse
Awesome! I'll give it a try. Waiting for it to be available in the playstore.
V2.2 is the latest
may take some time to get published
V2 is already out...check it out and provide your feedback..!
ravitez86 said:
V2.2 is the latest
may take some time to get published
V2 is already out...check it out and provide your feedback..!
Click to expand...
Click to collapse
Good job!! I love the app, the concept is great. I think the idea is better than Samsung's Smart Stay(or something like that) that never worked well enough for me. I'd surely use this app daily when it's finished. I didn't vote on the playstore because it needs some more development.
Here's a major bug I encountered: It sometimes doesn't work until you switch the feature off and on again, and switch between apps.
Also the sensibility is kinda low, i think ot should be higher(or maybe let the user select some kind of levels?).
Anyways, I call this app a good example of great use of a smartphone's sensor.
I have a question, does this app only work on Samsung devices? if not, I think you should make a thread in a general forum so any people can give you feedback, not only s3 owners.
I'm a student developer, so I hope I will submit an app to the store soon.
Cheers!!:good:
Thank you for the valuable feedback....
Its a strange issue..! Will definitely look in to the issue
When you said its not working are telling based on the Message you see on the screen when you open the app..if so that message will be displayed only for the first launch of the app.
right now sensitivity is at the best lowest as possible
you need not move the device slight angle change will also be considered
Good Luck with you app
and this will support all phones running android 4.0 and above
ravitez86 said:
Thank you for the valuable feedback....
Its a strange issue..! Will definitely look in to the issue
When you said its not working are telling based on the Message you see on the screen when you open the app..if so that message will be displayed only for the first launch of the app.
right now sensitivity is at the best lowest as possible
you need not move the device slight angle change will also be considered
Click to expand...
Click to collapse
I'm sorry, I forgot to tell you what I meant by "it doesn't work".
Well...sometimes the screen just forgets to turn off, even if phone is on the table.
About the sensibility, I think the app should detect a trembling hand, so it knows you're holding the phone. It's just a suggestion, I don't know how practical this would be.
---------- Post added at 02:32 ---------- Previous post was at 02:30 ----------
ravitez86 said:
Good Luck with you app
and this will support all phones running android 4.0 and above
Click to expand...
Click to collapse
Thanks!
cool...from the last movement detected phone will wait for (defaultscreentimeout - say 3 seconds) to actually turn off the screen..
is the screen staying on for more than defaultscreentimeout value...!
ravitez86 said:
cool...from the last movement detected phone will wait for (defaultscreentimeout - say 3 seconds) to actually turn off the screen..
is the screen staying on for more than defaultscreentimeout value...!
Click to expand...
Click to collapse
Yes it is, the screen timeout was actually 15 secons...just for testing. But the screen just refused to turn off while on the selected app. So I had tu turn the app off and on again few times till it worked. I think it's only the first time, after you install the app, I'm not sure. But it happened more tan once. Needs more testing.
MultiPDev said:
Yes it is, the screen timeout was actually 15 secons...just for testing. But the screen just refused to turn off while on the selected app. So I had tu turn the app off and on again few times till it worked. I think it's only the first time, after you install the app, I'm not sure. But it happened more tan once. Needs more testing.
Click to expand...
Click to collapse
Thank you...Will have an eye on it...please let me know if you can find a sequence and the app that's causing the issue,i will try to run it from my end
ravitez86 said:
Thank you...Will have an eye on it...please let me know if you can find a sequence and the app that's causing the issue,i will try to run it from my end
Click to expand...
Click to collapse
It happened to me again. The default timeout was 15 seconds. I just started Word app and kept the phone still. But the screen just refused to turn off(I waited 2 minutes). I solved this by turning the app off and on and switching between timeout times. However, it may be a rom bug (I'm running a cm12 based rom), as I found out it happens even after I turn off the app.
Good luck!!
Hello
Thank you for the info i tried to reproduce but couldnt
please find the screen shot please check if the app is correct "Word app"
since you have the issue even when you turn off the service i think its not related to SmartScreen
ravitez86 said:
Hello
Thank you for the info i tried to reproduce but couldnt
please find the screen shot please check if the app is correct "Word app"
since you have the issue even when you turn off the service i think its not related to SmartScreen
Click to expand...
Click to collapse
No buddy, I meant the "Word" application. You know...the one from Microsoft. Lol!! Anyway, the bug happened also with firefox...
Yeah maybe it's my rom's fault. I'll give it a try again when I switch to another one.
Good luck with the app!!
Ooops sure let me know if you come up with any issues..working on optimizing it so may be an update with minor improvements will be out later some time...
Thank you
V2.4 is out...!
V2.6 is out...Check it out
https://play.google.com/store/apps/details?id=com.dondeti.smartscreen
tl;dr my phone is laggy only when I'm typing and sometimes reverse letters.
I've had a Xiaomi Mi 5 until recently, then I bought a Redmi Note 8 and I noticed the typing experience isn't the same. I mean, the screen is different and I didn't use MIUI on the Mi 5, but that's the only difference. I use the GBoard app with the exact same configurations as it were on the Mi 5.
The problem lies mostly when I type letters that are in the border of the screen, like "q", "p" or the button that change to the Symbols and Numbers. The typing feels a bit "laggy" and sometimes the q's and p's reverses the order like when I type "problem" it goes like "rpoblem", same with "queue" and it goes like "uqeue". When I type fast, the problem always occurs, when I type slowly it's more rare, but also occurs.
For the center of the screen, no other letters does this reversing thing, but I can feel that when I press the letters, there's a micro-delay between me pressing and the letter actually showing, something that I've never felt while using the Mi 5.
I'm tempted on rooting my phone and changing the OS, but I don't know if it'll solve the problem. Did anyone feel or notice something similar to my rpoblem?
(I've had to correct nearly all the words that came out reversed while writing this)
slyd1619 said:
tl;dr my phone is laggy only when I'm typing and sometimes reverse letters.
I've had a Xiaomi Mi 5 until recently, then I bought a Redmi Note 8 and I noticed the typing experience isn't the same. I mean, the screen is different and I didn't use MIUI on the Mi 5, but that's the only difference. I use the GBoard app with the exact same configurations as it were on the Mi 5.
The problem lies mostly when I type letters that are in the border of the screen, like "q", "p" or the button that change to the Symbols and Numbers. The typing feels a bit "laggy" and sometimes the q's and p's reverses the order like when I type "problem" it goes like "rpoblem", same with "queue" and it goes like "uqeue". When I type fast, the problem always occurs, when I type slowly it's more rare, but also occurs.
For the center of the screen, no other letters does this reversing thing, but I can feel that when I press the letters, there's a micro-delay between me pressing and the letter actually showing, something that I've never felt while using the Mi 5.
I'm tempted on rooting my phone and changing the OS, but I don't know if it'll solve the problem. Did anyone feel or notice something similar to my rpoblem?
(I've had to correct nearly all the words that came out reversed while writing this)
Click to expand...
Click to collapse
Try clearing app data of Gboard.
jc9896 said:
Try clearing app data of Gboard.
Click to expand...
Click to collapse
Doesn't work, unfortunately.
slyd1619 said:
Doesn't work, unfortunately.
Click to expand...
Click to collapse
All rn8 has this problem,i flashed european rom to solve this problem and nearly it is solved ,no laggy also try to make gboard size longer than normal from settings ,this will terminate this problem
slyd1619 said:
Doesn't work, unfortunately.
Click to expand...
Click to collapse
weird, never had this issue before. friends of mine fixed theirs by clearing Gboard data.
try clearing cache in storage settings and restarting.
I had same problem as you when I was using global MIUI 10 (tianma panel). After unlocking bootloader and installing localized MIUI 11 ROM, I don't experience such problems anymore.
niceman2007 said:
All rn8 has this problem,i flashed european rom to solve this problem and nearly it is solved ,no laggy also try to make gboard size longer than normal from settings ,this will terminate this problem
Click to expand...
Click to collapse
Tried all sizes, didn't work.
pqhaz said:
I had same problem as you when I was using global MIUI 10 (tianma panel). After unlocking bootloader and installing localized MIUI 11 ROM, I don't experience such problems anymore.
Click to expand...
Click to collapse
Thanks for the advice, I'll try another ROM.
jc9896 said:
weird, never had this issue before. friends of mine fixed theirs by clearing Gboard data.
try clearing cache in storage settings and restarting.
Click to expand...
Click to collapse
Cleared everything, nothing works unfortunately.
slyd1619 said:
Cleared everything, nothing works unfortunately.
Click to expand...
Click to collapse
Is it a hardware issue? Maybe check if it shows up in other apps, if your device is still covered by warranty get it replaced or fixed.
jc9896 said:
Is it a hardware issue? Maybe check if it shows up in other apps, if your device is still covered by warranty get it replaced or fixed.
Click to expand...
Click to collapse
It only happens when I'm typing and I've only tested while using GBoard, it's the app I've always used and I don't want to change.
But if you have any other keyboard app suggestion for me to try I'll do it.
slyd1619 said:
It only happens when I'm typing and I've only tested while using GBoard, it's the app I've always used and I don't want to change.
But if you have any other keyboard app suggestion for me to try I'll do it.
Click to expand...
Click to collapse
Used to use Swiftkey, but Microsoft.
I mainly use GBoard, its a good app. Most keyboard apps I see on the store are either paid, riddled with ads or something from Clean Master (data collection, privacy issues, and ads). Your best bet would be sideload a keyboard app from APKMirror such as the Xperia keyboard, remembered that to be quite good.
jc9896 said:
Used to use Swiftkey, but Microsoft.
I mainly use GBoard, its a good app. Most keyboard apps I see on the store are either paid, riddled with ads or something from Clean Master (data collection, privacy issues, and ads). Your best bet would be sideload a keyboard app from APKMirror such as the Xperia keyboard, remembered that to be quite good.
Click to expand...
Click to collapse
I don't think it's worth the effort since I'm using it like this for the past three weeks. I'm thinking about unlocking the bootloader next week when I'm home to install another ROM, do you have any suggestions? I don't quite like MIUI.
Also, is there a RN8 Telegram group?
slyd1619 said:
I don't think it's worth the effort since I'm using it like this for the past three weeks. I'm thinking about unlocking the bootloader next week when I'm home to install another ROM, do you have any suggestions? I don't quite like MIUI.
Also, is there a RN8 Telegram group?
Click to expand...
Click to collapse
There is Pixel Experience and POSP. Haven't tried either yet though. You can also wait for LineageOS.
Not sure about the telegram group, but there's been some stuff on XDA about telegram groups for a device though.
its a rom issue
change the rom
jc9896 said:
There is Pixel Experience and POSP. Haven't tried either yet though. You can also wait for LineageOS.
Not sure about the telegram group, but there's been some stuff on XDA about telegram groups for a device though.
Click to expand...
Click to collapse
I think I'm gonna try POSP. For now, I don't want to lose my warranty. About the tianma panel problem (temporary image retention), do you think I should try a replacement?
slyd1619 said:
I think I'm gonna try POSP. For now, I don't want to lose my warranty. About the tianma panel problem (temporary image retention), do you think I should try a replacement?
Click to expand...
Click to collapse
If you are still under warranty, by all means give it a try.
The replacement may not come with a different panel though, as some have been stating.
Hey man! Did the ROM change fix it?
I just received my RN8 today and immediately noticed the laggy borders. Even in the nav bar.
Hello,
I need a bit of help on this, my phone has really weird permissions issues. For example, when I want to configure an app for the first time that tells me to go enable notification access and it sends me to the screen where you can toggle notification access for a lot of apps and you activate the access for the app in question, the app doesn't see that you turned the permission on when it is on (double checked). I'll link a YT video I made that shows the issue perfectly. (please take note that this happens on EVERY app that asks for permissions this way)
The video might be blurry due to YT taking its time to process the video in its full HD glory.
https://youtu.be/lPkQYS7XURo
I tried resetting the phone and clearing the dalvik cache to no avail... And I don't know if its related, but both the Facebook app and the Messenger App crash really easily while doing the most mundane stuff (sending an image is often too much). They both have full permissions enabled. Weird, huh ?
If you know how to fix this, don't hesitate to post your method in this thread
Allmightyusfame said:
Hello,
I need a bit of help on this, my phone has really weird permissions issues. For example, when I want to configure an app for the first time that tells me to go enable notification access and it sends me to the screen where you can toggle notification access for a lot of apps and you activate the access for the app in question, the app doesn't see that you turned the permission on when it is on (double checked). I'll link a YT video I made that shows the issue perfectly. (please take note that this happens on EVERY app that asks for permissions this way)
The video might be blurry due to YT taking its time to process the video in its full HD glory.
I tried resetting the phone and clearing the dalvik cache to no avail... And I don't know if its related, but both the Facebook app and the Messenger App crash really easily while doing the most mundane stuff (sending an image is often too much). They both have full permissions enabled. Weird, huh ?
If you know how to fix this, don't hesitate to post your method in this thread
Click to expand...
Click to collapse
That video is in spanish. Some people like me will have no idea what the first screen requested
v.konvict said:
That video is in spanish. Some people like me will have no idea what the first screen requested
Click to expand...
Click to collapse
Hello,
Sorry, I just edited the YT link, now the vid is in english
Hello,
I don't know if it's allowed but I'm desperate soooo... Bump.
Okay i just saw the video. Can you disable notifications during the setup just so that you finish setting up the buds then try again enabling notification access from within the app after finishing setting it up
v.konvict said:
Okay i just saw the video. Can you disable notifications during the setup just so that you finish setting up the buds then try again enabling notification access from within the app after finishing setting it up
Click to expand...
Click to collapse
I tried, it keeps asking for notification permissions and won't go forward. And it does that for other apps that rely on notifications (NotifyEdge for example).
Allmightyusfame said:
I tried, it keeps asking for notification permissions and won't go forward. And it does that for other apps that rely on notifications (NotifyEdge for example).
Click to expand...
Click to collapse
Let me download it as well and see. What version os are you running?
Wierdly its working fine on mine. Am on beta 8 by the way.
I'm on 10.0.9.HD01BA
It's a french phone. I may try to join the beta ^^
Allmightyusfame said:
I'm on 10.0.9.HD01BA
It's a french phone. I may try to join the beta ^^
Click to expand...
Click to collapse
Maybe something wrong with the European firmware. That BA at the end indicates that. Try global firmware. Either stable or beta
Thanks for the advice man, I'll try with the beta and I'll get back to youas soon as possible to let you know and maybe make a psa about EU fw if it's that.
Alright, I'm downloading the beta rn and I'll update you on that ASAP.
Thanks for your time !
Well, no dice, even after the beta install... I'll try wiping everything tonight. I'll keep you updated !
Allmightyusfame said:
Well, no dice, even after the beta install... I'll try wiping everything tonight. I'll keep you updated !
Click to expand...
Click to collapse
Wait before you continue. Do other apps that require notification access give u a hard time besides the notifyedge and bud app that i could try as well to make sure its phone not the app that has a problem
v.konvict said:
Wait before you continue. Do other apps that require notification access give u a hard time besides the notifyedge and bud app that i could try as well to make sure its phone not the app that has a problem
Click to expand...
Click to collapse
I tried to use NotifyBuddy and it has the same issue
Allmightyusfame said:
I tried to use NotifyBuddy and it has the same issue
Click to expand...
Click to collapse
Wierd coz that also definately works on mine. Must be a firmware issue
v.konvict said:
Wierd coz that also definately works on mine. Must be a firmware issue
Click to expand...
Click to collapse
Is there a good stock Android cfw for this device ?
Allmightyusfame said:
Is there a good stock Android cfw for this device ?
Click to expand...
Click to collapse
I am on beta 8 and i have no complaints
Hey there guys!
I just wanted to post this in case anybody out there wants to have Google Screen Call feature on their stock phone app.
It's pretty easy to be honest
Since the OnePlus 9 and 9 Pro have the google phone apk built in, I had to look at a bunch of info to see how it could work but figured out that it's a lot easier than I thought.
Requirements needed:
-Rooted One Plus 9/ 9Pro
-Termux installed (Play Store)
- Busy Box module installed
-Magisk Hide Props module installed
-PrefEdit installed (Play Store)
1st Step:
Open Termux
Type
su
Click to expand...
Click to collapse
Grant root permission
Then Type
props
Click to expand...
Click to collapse
If you have enable Device Simulation then skip 2nd step (If not then continue)
2nd Step:
Type in "1" ( to edit device fingerprint)
Type "f" (to pick a certified fingerprint)
After that you are going to choose Google and type the number it corresponds to ( Mine was 7)
It will show you a bunch of phones.
Just find the Pixel 4 XL and type the number it corresponds to ( mine was 23)
In reality I don't think it matters which phone you use just make sure it was a pixel phone that has screen call built in.
It's going to be give you some options of which OS version you want
I chose android 11 just to be sure
Type
2
Click to expand...
Click to collapse
Then it will ask you if you want to reboot
Type in "y" to finish the 2nd Step
3rd step:
Open Termux again and redo 1st step
once your on the page it should say "device Fingerprint (active)"
Type
2
Click to expand...
Click to collapse
The next page will show you a bunch of options that you can enable.
The ones you need to enable are-
1,2,3,4,5,6,7,9,10
Click to expand...
Click to collapse
(DON'T enable "8") I accidentally enabled it and screen call didn't work
once it says it's finished Type in "y"
then it will reboot
4th Step:
Once your phone has booted up
you need to go to settings then apps and clear phone data and cache
then find Google Play services and clear data and cache
After that open the phone app and go to settings to see if screen call feature is there
If it isn't showing up then you'll need to use PrefEdit
Close the phone app (if you haven't already)
Open PrefEdit and find Phone
It should show you like 5 files
Choose dialer
Once there tap on "dialer_phenotype_flags.xml"
then search for "speak"
Find this code line
G_speak_easy_bypass_locale_check
Click to expand...
Click to collapse
tap on it and change it from false to true
then tap the save button
Now you're finished!!
Things to note once you go back to the phone app you'll need to be on Wifi to enable the feature.
If you have any questions just let me know and I'll help you out as best I can !
I will post ScreenShots of what to do if you need to see how yours should look like.
Outstanding guide ty!
Have this option already without any mods.
Very nice guide! Man, I'm super conflicted. I'd love to have the screen call feature, but I'm already using the OP dialer for call recording. No way to have the best of both worlds I guess.
r4p70r said:
Have this option already without any mods.
Click to expand...
Click to collapse
How?
Hey that's a really good guide. And a good way to get that feature. But can u not still go back and just change the flags??? And make it work with out changing the fingerprint?
bb12489 said:
How?
Click to expand...
Click to collapse
I don't know. I have the EU Version and I am from Germany. This feature may already be officially available here in Germany. I have no other explanation for this.
amaroney55 said:
Hey that's a really good guide. And a good way to get that feature. But can u not still go back and just change the flags??? And make it work with out changing the fingerprint?
Click to expand...
Click to collapse
I've tried it but it doesn't seem to want to work on my device.
r4p70r said:
I don't know. I have the EU Version and I am from Germany. This feature may already be officially available here in Germany. I have no other explanation for this.
View attachment 5282765
Click to expand...
Click to collapse
I'm translating so I could be wrong but pretty sure that's "Caller-ID and Spam" which is the option you get when you don't have Call Screening. So you don't actually have Call Screening I believe.
JayGoat said:
I'm translating so I could be wrong but pretty sure that's "Caller-ID and Spam" which is the option you get when you don't have Call Screening. So you don't actually have Call Screening I believe.
Click to expand...
Click to collapse
Yes, you are right
r4p70r said:
Yes, you are right
View attachment 5282983
Click to expand...
Click to collapse
No worries! Just wanted to make sure.
Off topic, how did you get that circle battery around the camera hole?
JayGoat said:
No worries! Just wanted to make sure.
Off topic, how did you get that circle battery around the camera hole?
Click to expand...
Click to collapse
It's an app called Energy Ring
Nice easy to follow guide but will not activate at all. Just stuck at activating call screen (requires wifi) and yes wifi is working.....lol
bamemanxxa3416 said:
Nice easy to follow guide but will not activate at all. Just stuck at activating call screen (requires wifi) and yes wifi is working.....lol
Click to expand...
Click to collapse
hm thats odd, ry leaving the app open while connected to wifi and see if that changes cause it took a while for me when it activated
wooo000 said:
hm thats odd, ry leaving the app open while connected to wifi and see if that changes cause it took a while for me when it activated
Click to expand...
Click to collapse
I tried an older method that worked on my 7t and it's now working but it had to be done on an older google dialer ver 39.270.
It's not the fancy newer version but it works
wooo000 said:
Hey there guys!
I just wanted to post this in case anybody out there wants to have Google Screen Call feature on their stock phone app.
It's pretty easy to be honest
Since the OnePlus 9 and 9 Pro have the google phone apk built in, I had to look at a bunch of info to see how it could work but figured out that it's a lot easier than I thought.
Requirements needed:
-Rooted One Plus 9/ 9Pro
-Termux installed (Play Store)
- Busy Box module installed
-Magisk Hide Props module installed
-PrefEdit installed (Play Store)
1st Step:
Open Termux
Type
Grant root permission
Then Type
If you have enable Device Simulation then skip 2nd step (If not then continue)
2nd Step:
Type in "1" ( to edit device fingerprint)
Type "f" (to pick a certified fingerprint)
After that you are going to choose Google and type the number it corresponds to ( Mine was 7)
It will show you a bunch of phones.
Just find the Pixel 4 XL and type the number it corresponds to ( mine was 23)
In reality I don't think it matters which phone you use just make sure it was a pixel phone that has screen call built in.
It's going to be give you some options of which OS version you want
I chose android 11 just to be sure
Type
Then it will ask you if you want to reboot
Type in "y" to finish the 2nd Step
3rd step:
Open Termux again and redo 1st step
once your on the page it should say "device Fingerprint (active)"
Type
The next page will show you a bunch of options that you can enable.
The ones you need to enable are-
(DON'T enable "8") I accidentally enabled it and screen call didn't work
once it says it's finished Type in "y"
then it will reboot
4th Step:
Once your phone has booted up
you need to go to settings then apps and clear phone data and cache
then find Google Play services and clear data and cache
After that open the phone app and go to settings to see if screen call feature is there
If it isn't showing up then you'll need to use PrefEdit
Close the phone app (if you haven't already)
Open PrefEdit and find Phone
It should show you like 5 files
Choose dialer
Once there tap on "dialer_phenotype_flags.xml"
then search for "speak"
Find this code line
tap on it and change it from false to true
then tap the save button
Now you're finished!!
Things to note once you go back to the phone app you'll need to be on Wifi to enable the feature.
If you have any questions just let me know and I'll help you out as best I can !
I will post ScreenShots of what to do if you need to see how yours should look like.
Click to expand...
Click to collapse
Going to add to this, if it doesn't show up in your dialer settings, clear the cache from both your Phone app and from Google Play Services, then open the Phone app again, and wait a few minutes if you still don't see it. Once you do, toggle it and see if your basic phone functions are still working. Believe it or not, some people's microphones wouldn't work with this trick in effect.
And now a rant of sorts.
The problem with this process is that in doing such, you are tricking not only the Google Phone application into thinking you're running actual Pixel hardware, but everything else, too. So this opens a whole can of worms when it comes to things like software/OOS updates, kernels, Magisk modules, etc.
For example, Elemental Kernel refused to install on my OP 7T because it was identifying itself as a "Pixel 4a." And even then, while I did get call screening to work, briefly, having to revert the changes to update things, then redo the changes, and hope they stick again.... wasn't worth it for me to do all that. I just wish we could officially get their call screening technology on EVERY Google device. Or at least ones that can use the Google Dialer framework.
So be prepared for a lot of troubleshooting and frustration. You may have to ask yourself if this is worth it.
Ty so much for this. I finally had time to do it. But the weirdest thing happened it never showed the screen option or hold for me option. But like 9 hours later I used my phone and there it was setting up.
Is it possible to enable call recording with this method as well?
according to the link, call recording should be integrated in the dialer starting vom version v63:
OnePlus exploring adding automatic call recording support in India
OnePlus devices don't support automatic call recording, but this may change in future in India, at least according to a staff member.
piunikaweb.com
So I've tried this a numerous amount of times with zero luck on firmware 11.2.4.4. does anyone have any ideas as to why it's not working for me?
ilikepie___ said:
So I've tried this a numerous amount of times with zero luck on firmware 11.2.4.4. does anyone have any ideas as to why it's not working for me?
Click to expand...
Click to collapse
Could you explain? Which part is failing? What isn't working? The call screen part? The dialer?