Related
While trying to root my redmi 1s, i accidentally pressed a wrong button due to which it seemed like if recovery is no longer functioning.
The mobile is getting struck at mi logo and is not proceeding forward.
Pressing volume down+power button successfully opens fastboot screen. Earlier when I was connecting it to mi suite on pc, i was able to flash. But due to incomplete charged battery, flashing procedure stopped. After the recent windows update, mi pc suite is recognizing the android but is not able to flash it. It pops out a dialogue box saying "cant flash the device". Any idea what can i do now?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
akshat2119 said:
While trying to root my redmi 1s, i accidentally pressed a wrong button due to which it seemed like if recovery is no longer functioning.
The mobile is getting struck at mi logo and is not proceeding forward.
Pressing volume down+power button successfully opens fastboot screen. Earlier when I was connecting it to mi suite on pc, i was able to flash. But due to incomplete charged battery, flashing procedure stopped. After the recent windows update, mi pc suite is recognizing the android but is not able to flash it. It pops out a dialogue box saying "cant flash the device". Any idea what can i do now?
Click to expand...
Click to collapse
If your phone boots into fastboot, then try installing twrp recovery and then flash the rom you wish.
vicky romero said:
If your phone boots into fastboot, then try installing twrp recovery and then flash the rom you wish.
Click to expand...
Click to collapse
but how to flash twrp via fastboot. i.e. which software would recognize fastbooting android?
akshat2119 said:
but how to flash twrp via fastboot. i.e. which software would recognize fastbooting android?
Click to expand...
Click to collapse
Flashing twrp is done by fastboot using adb tools. First install the USB drivers of your phone. You can simply google them. Then go to this link https://drive.google.com/open?id=0B_43Fi9T_yqvUy1jOWk0cnJyZEk
and download the four files in the adb folder. Now download the latest twrp image i.e, twrp 3.0.0-0 from this link
https://dl.twrp.me/armani/
keep the adb tools i.e, the four files you had downloaded and the twrp image in the same folder. Rename the twrp 3.0.0-0 to recovery.img. Now hold shift key and press right click on your mouse. From there select open command window here. Now open fastboot and connect your phone through Usb and type this code
Code:
fastboot devices
This is to check wheather your device is connected or not. If it's connected then it will show some code. After that type this code
Code:
fastboot flash recovery recovery.img
That's it twrp will be flashed right away. Then you can flash MIUI or any other custom rom.
Thank you
vicky romero said:
Flashing twrp is done by fastboot using adb tools. First install the USB drivers of your phone. You can simply google them. Then go to this link https://drive.google.com/open?id=0B_43Fi9T_yqvUy1jOWk0cnJyZEk
and download the four files in the adb folder. Now download the latest twrp image i.e, twrp 3.0.0-0 from this link
https://dl.twrp.me/armani/
keep the adb tools i.e, the four files you had downloaded and the twrp image in the same folder. Rename the twrp 3.0.0-0 to recovery.img. Now hold shift key and press right click on your mouse. From there select open command window here. Now open fastboot and connect your phone through Usb and type this code
Code:
fastboot devices
This is to check wheather your device is connected or not. If it's connected then it will show some code. After that type this code
Code:
fastboot flash recovery recovery.img
That's it twrp will be flashed right away. Then you can flash MIUI or any other custom rom.
Click to expand...
Click to collapse
A big thank you. I owe you for helping out. By the way after installing recovery I tried downloading rom(both armani which was earlier working and miui official). The script gets sideloaded successfully but again the operating system is not loading. ie mobile is still struck in bootloader
akshat2119 said:
A big thank you. I owe you for helping out. By the way after installing recovery I tried downloading rom(both armani which was earlier working and miui official). The script gets sideloaded successfully but again the operating system is not loading. ie mobile is still struck in bootloader
Click to expand...
Click to collapse
Flash this firmware before installing the rom. It'll fix the bootloops.
https://www.androidfilehost.com/?fid=24052804347850305
Thanks @fefifofum for this flashable zip.
First of all, before i start, I'll make this clear, i have done this procedure and rooted my IN1B successfully BUT if anything goes wrong with your device,
I WILL NOT BE RESPONSIBLE FOR BRICKED DEVICES
PreRequisites (Stuff you will need)
So, Let's get into it.
Before Begining, Here are the things you'll need :-
1. A windows PC with all the necessary drivers.
2. ADB and fastboot which you can get from here.
3. A USB C cable, preferably the original one.
4. Make sure your Device is atleast 60% charged.
5. Backup all your data because the very first step will reset your phone.
NOTE- MICROMAX DOES NOT PROVIDE ANY USB DRIVERS. So i had trouble finding the Drivers too, so i recomend you use "Driver booster" it's free, you can get it from here. After installing the driver booster, let it scan and then update all the drivers related to "Android" and "ADB".
That's it, once you are done with all the above points we are good to start.
These are the PATCHED files you need to flash to root your device.
1. Get the files from Here
After you download the files, copy and paste the files in the folder where ADB & Fastboot is located, if you have not changed the Install location, it should be at this directory- C:\Program Files (x86)\Minimal ADB and Fastboot
After you paste all the 3 downloaded files in the ADB folder, the process will now start.
Unlocking the BootLoader
The first step is to unlock the boot loader.
1. Connect your device with a USB C cable.
2. Enable USB debugging from the developer options-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Now run ADB and run this command- adb devices As you run this, something like this should appear on your mobile-
4. Now allow it and Voila!, you are now connected!
5. Now find "OEM Unlocking" and enable it.
6. Now enter this command- adb reboot bootloader As you run this command your device will reboot and show a black screen with only "fastboot" written on it.
7. Now finally Enter this command- fastboot flashing unlock
8. Now it will ask you to confirm, if you change your mind and dont want to root now, press the "Volume-Down" Button or if you want to root, press the "Volume-Up" button.
NOTE- UNLOCK MAY VOID SOFTARE WARRANTY. FOR DETAILS, CHECK THIS (Read 6e)
9. Awesome! Now you have unlocked your boot loader!!
Flashing the Patched Files
Now remember you need the 3 files i linked above, once you get them, paste them in the ADB folder.
Make sure you DON't change the file names.
Let's Start!
1. Run this command- fastboot flash boot patched_boot.img
2. After that, Run this- fastboot --disable-verification flash vbmeta vbmeta.img
3 And he final command, run this- fastboot flash recovery recovery.img
After all these 3 complete succesfully, Just run- fastboot reboot This will start your device normally, go on and set up your device.
1.As you complete the setup, you should see the magisk app-
2. Now the magisk app will ask you to install the full version, click on confirm and it will install the magisk app, you will have to turn on the "Unknown sources" option.
3. Once it is installed, you can ENJOY YOUR ROOTED IN 1B!!
IF YOU NEED ANY HELP, FEEL FREE TO WRITE IT BELOW, OR DM ME ON TELEGRAM- Âkio or DISCORD- Âkio#7134
Akahat27 said:
First of all, before i start, I'll make this clear, i have done this procedure and rooted my IN1B successfully BUT if anything goes wrong with your device,
I WILL NOT BE RESPONSIBLE FOR BRICKED DEVICES
PreRequisites (Stuff you will need)
So, Let's get into it.
Before Begining, Here are the things you'll need :-
1. A windows PC with all the necessary drivers.
2. ADB and fastboot which you can get from here.
3. A USB C cable, preferably the original one.
4. Make sure your Device is atleast 60% charged.
5. Backup all your data because the very first step will reset your phone.
NOTE- MICROMAX DOES NOT PROVIDE ANY USB DRIVERS. So i had trouble finding the Drivers too, so i recomend you use "Driver booster" it's free, you can get it from here. After installing the driver booster, let it scan and then update all the drivers related to "Android" and "ADB".
That's it, once you are done with all the above points we are good to start.
These are the PATCHED files you need to flash to root your device.
1. Get the files from Here
After you download the files, copy and paste the files in the folder where ADB & Fastboot is located, if you have not changed the Install location, it should be at this directory- C:\Program Files (x86)\Minimal ADB and Fastboot
After you paste all the 3 downloaded files in the ADB folder, the process will now start.
Unlocking the BootLoader
The first step is to unlock the boot loader.
1. Connect your device with a USB C cable.
2. Enable USB debugging from the developer options-
View attachment 5326971
3. Now run ADB and run this command- adb devices As you run this, something like this should appear on your mobile-
View attachment 5326979
4. Now allow it and Voila!, you are now connected!
5. Now find "OEM Unlocking" and enable it.
View attachment 5326983
6. Now enter this command- adb reboot bootloader As you run this command your device will reboot and show a black screen with only "fastboot" written on it.
7. Now finally Enter this command- fastboot flashing unlock
8. Now it will ask you to confirm, if you change your mind and dont want to root now, press the "Volume-Down" Button or if you want to root, press the "Volume-Up" button.
NOTE- UNLOCK MAY VOID SOFTARE WARRANTY. FOR DETAILS, CHECK THIS (Read 6e)
9. Awesome! Now you have unlocked your boot loader!!
Flashing the Patched Files
Now remember you need the 3 files i linked above, once you get them, paste them in the ADB folder.
Make sure you DON't change the file names.
Let's Start!
1. Run this command- fastboot flash boot patched_boot.img
2. After that, Run this- fastboot --disable-verification flash vbmeta vbmeta.img
3 And he final command, run this- fastboot flash recovery recovery.img
After all these 3 complete succesfully, Just run- fastboot reboot This will start your device normally, go on and set up your device.
1.As you complete the setup, you should see the magisk app-
View attachment 5326989
2. Now the magisk app will ask you to install the full version, click on confirm and it will install the magisk app, you will have to turn on the "Unknown sources" option.
3. Once it is installed, you can ENJOY YOUR ROOTED IN 1B!!
IF YOU NEED ANY HELP, FEEL FREE TO WRITE IT BELOW, OR DM ME ON TELEGRAM- Âkio or DISCORD- Âkio#7134
Click to expand...
Click to collapse
ON which android version u have done this given me firmware name
pankspoo said:
ON which android version u have done this given me firmware name
Click to expand...
Click to collapse
I did on the android 10 which it initially came with..
Hello everyone. This is my post here on XDA.
I'm using Nokia G20 TA-1365 Model (INDIA).
Let's get to the tutorial.
Prerequisites:
1. A Windows PC.
2. ADB and Fastboot Drivers.
3. Nokia G20 or G10.
Switch off your Nokia G20 device.
Press and Hold Volume down and Power Key together.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
After 3 seconds device will boot into fasboot mode.
Now connect your device to your computer and it will appear as Android Bootloader Interface in the device manager as shown below.
Then open CMD or Command Prompt Window as Administrator and type command as "fastboot reboot recovery" and hit enter
Once you hit enter "CMD" will show <Rebooting into recovery> and your phone will reboot and show Android One logo and then show a android logo with exclamation mark No command text right below it.
Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.
Just to add to this thread: This device uses fastbootd. To get into fastbootd, you must have the latest adb drivers. Connect your phone and type:
adb reboot fastboot -- not "bootloader". This will get you into the fastbootd screen. From there you can type fastboot reboot recovery which will take you into the normal recovery screen. Hope this helps. Remember -- you must be in fastbootd to accomplish this.
mvikrant97 said:
Hello everyone. This is my post here on XDA.
I'm using Nokia G20 TA-1365 Model (INDIA).
Let's get to the tutorial.
Prerequisites:
1. A Windows PC.
2. ADB and Fastboot Drivers.
3. Nokia G20 or G10.
Switch off your Nokia G20 device.
Press and Hold Volume down and Power Key together.
View attachment 5444075
After 3 seconds device will boot into fasboot mode.
View attachment 5444077
Now connect your device to your computer and it will appear as Android Bootloader Interface in the device manager as shown below.
View attachment 5444081
Then open CMD or Command Prompt Window as Administrator and type command as "fastboot reboot recovery" and hit enter
View attachment 5444087
Once you hit enter "CMD" will show <Rebooting into recovery> and your phone will reboot and show Android One logo and then show a android logo with exclamation mark No command text right below it.
Keep holding Power key and press Volume up once and you will enter recovery mode. Release the keys.
View attachment 5444095
Click to expand...
Click to collapse
Thank you so much love! I hate this phone's stock everything, time to fix that~!
@joegib thank you for adding on about the fastbootd systems. I haven't encountered this before and your post was a lot of help :>
jenneh said:
Thank you so much love! I hate this phone's stock everything, time to fix that~!
@joegib thank you for adding on about the fastbootd systems. I haven't encountered this before and your post was a lot of help :>
Click to expand...
Click to collapse
Can anyone here help unlocking bootloader for g20
Step 11 does not work. I tried it at least 5 times.
Nokia G10 (TA-1334)
Build 00WW_1_260
Android 11
Lebedew said:
O passo 11 não funciona. Tentei pelo menos 5 vezes.
Nokia G10 (TA-1334)
Construir 00WW_1_260
Android 11
Click to expand...
Click to collapse
Também estou na mesma situação
Lebedew said:
Step 11 does not work. I tried it at least 5 times.
Nokia G10 (TA-1334)
Build 00WW_1_260
Android 11
Click to expand...
Click to collapse
Same problem. Have you found a solution?
KeinName_exe said:
Same problem. Have you found a solution?
Click to expand...
Click to collapse
You need to type command "fastboot reboot fastboot" first. Then type "fastboot reboot recovery"
You may also face problem booting your device after factory reset. If you do, you need to boot into fastboot again using steps 1-8 and then type command "fastboot --set-active="b""
Jonny_Zebberty said:
You need to type command "fastboot reboot fastboot" first. Then type "fastboot reboot recovery"
You may also face problem booting your device after factory reset. If you do, you need to boot into fastboot again using steps 1-8 and then type command "fastboot --set-active="b""
Click to expand...
Click to collapse
Thankyou so much! This worked for me.
I've got nokia G10 TA-1334 and best further i went is this. at point 6 best raindance i done with drivers as attached. using this binded with this doesnt giving a result. my phone goes in shadows in fastboot mode and my pc doesnt seeing it. litteraly spend 12 hours just on drivers and nothing.
Can anyone help me go to recovery mode.
crispy_fry said:
I've got nokia G10 TA-1334 and best further i went is this. at point 6 best raindance i done with drivers as attached. using this binded with this doesnt giving a result. my phone goes in shadows in fastboot mode and my pc doesnt seeing it. litteraly spend 12 hours just on drivers and nothing.
Can anyone help me go to recovery mode.
Click to expand...
Click to collapse
crispy_fry said:
same problem with nokia G10 TA-1334.. did you found and solution yet ???????
Click to expand...
Click to collapse
still none
Put device in fastboot mode (vol - power), connect to PC, install adb drivers, in cmd (admin rights) type:
fastboot devices
fastboot reboot fastboot
fastboot reboot recovery
thorn_pl said:
Put device in fastboot mode (vol - power), connect to PC, install adb drivers, in cmd (admin rights) type:
fastboot devices
fastboot reboot fastboot
fastboot reboot recovery
Click to expand...
Click to collapse
CD/
CD adb_folder
thorn_pl said:
CD/
CD adb_folder
Click to expand...
Click to collapse
Thanks!
thorn_pl said:
View attachment 5692381View attachment 5692387
Click to expand...
Click to collapse
any thoughts on this? And any way to unlook the bootloader of G10? The tools I found are not working for the G10. I loved to use Magisk for root but since I'm not able to get into Recovery Mode... btw are there any custom roms for the G10?
I tried to enter fastboot through fastboot, a message was displayed. With the fastboot reboot recovey command, the smartphone simply reboots. Diveces Nokia G21
Hello together,
today i tried to install /e/ OS on my new FP4.
I did everything like in the official description:
> ## Unlocking the bootloader
>
> 1. Boot the device
> 2. Enable and connect Wifi
> 3. Enable Developer options
> 4. From developer options, enable OEM unlock
> * Get the unlock code from [this site](https://www.fairphone.com/en/bootloader-unlocking-code-for-fairphone-3/) and enter it
> 5. Reboot on fastboot by running the command in the PC console `adb reboot bootloader`
>
> 6.*Tip:** All the console commands are run on an adb enabled PC and in the `adb` console.
>
> 7. Ask for unlock with `fastboot flashing unlock`
> 8. Approve with <kbd>volume +</kbd> then <kbd>power</kbd>
> * The device proceed with a factory reset, and automatically reboots
At 8 i maybe made a mistake, when you are in the fastboot mode, you can choose different options, i choosed something like FFBM or something like this. Then the device restarted and since that it always shows the "blue dots" like in the beginning but nothing more happens, since hours.
I turned it off and on again, without success.
I can not load the fastboot again via ADB, because the device is not recognized.
If i try to use the volumeUP or VolumeDOWN at the startup, nothing happens and it restarts again after a few seconds.
So there is no way for me to enter the fastboot mode again.
So I have two questions to you, lovely community.
One is, can anybody help me?
Second, can somebody tell me how the different options are called in the fastboot mode, so i can google it and do more research.
THANKS a lot and sorry for my english :slight_sm
Hi,
Are you able to launch the stock rom or are u stuck on bootloop or bootloader page ?
If you can launch the stock rom, enable oem, debugging and unlock bootloader in developper options.
Then connect phone to pc with the cable and type adb devices
see if the phone is recopgnized.
Then adb reboot bootloader and do all steps of the official guide.
If you use Windows I suggest you to put all file to your adb folder, type CD /path/to/folder/
And copy paste all commands at once, this will avoid error of mishandling during fastboot operations.
If you stuck on a "waiting for phone" when you are in fastboot mode, check you driver, or test with a linux machine or see Hulk's solution here
If you stuck on a bootloop just use the key combo to enter bootloader. check on the bootloader is everything is ok (unlock) if not redone steps to unlock bootloader, then flash recovery from /e/ os folder fastboot flash recovery recovery.img
Then enter in recovery use the combo key to have the menu choice between bootloader, recovery... then enter recovery and wipe data...
Then restart the official guide of /e/ os.
You may ask on /e/ os forum too many much more Fairphone user are there and can help you (link i gave you above).
A944684 said:
Hi,
Are you able to launch the stock rom or are u stuck on bootloop or bootloader page ?
If you can launch the stock rom, enable oem, debugging and unlock bootloader in developper options.
Then connect phone to pc with the cable and type adb devices
see if the phone is recopgnized.
Then adb reboot bootloader and do all steps of the official guide.
If you use Windows I suggest you to put all file to your adb folder, type CD /path/to/folder/
And copy paste all commands at once, this will avoid error of mishandling during fastboot operations.
If you stuck on a "waiting for phone" when you are in fastboot mode, check you driver, or test with a linux machine or see Hulk's solution here
If you stuck on a bootloop just use the key combo to enter bootloader. check on the bootloader is everything is ok (unlock) if not redone steps to unlock bootloader, then flash recovery from /e/ os folder fastboot flash recovery recovery.img
Then enter in recovery use the combo key to have the menu choice between bootloader, recovery... then enter recovery and wipe data...
Then restart the official guide of /e/ os.
You may ask on /e/ os forum too many much more Fairphone user are there and can help you (link i gave you above).
Click to expand...
Click to collapse
Hello,
thanks for your reply.
I posted the same comment at the /E/ OS Forum as well.
I Can not load the stock rom, there are only this blue dots circling around for hours:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I can not enter anything else, using ADB is not possible because the device is not recognized and the combination of volumeUP and power or volumeDOWN and power only restarts the device.
Do you have a FP4 and you maybe can tell me which options in the top of the fastboot menu you can choose?
Something like reboot and so on.
I will try the solution in your link in a few hours when i have more time.
Thanks a lot and BR
Bootloader menu options are "start / restart bootloader / recovery mode / power off / boot in ffbm / boot to qmmi"
I don't understand your problem if your bootloader is unlock you must have accesss to bootloader.
Are you sure you didn't relock bootloader before checking the rom is correctly installed ?
Contact /e/ support to have the precise combo key to enter bootloader. sometimes it change from phone to phone.
Does your computer works well with adb and fastboot before ? did you already flash rom ? Maybe a driver is missing or adb/fastboot is not on the last version. You may try with a linux pc to aovid those problem.
From /e/ Os website : https://doc.e.foundation/devices/FP4/install
How to Boot into bootloader mode
This section will be relevant later throughout the guide, when you need to reboot into bootloader mode.
Remove any USB-C cable and turn off your Fairphone 4
Tip: If you cannot turn your device off, remove the battery for about 5 seconds, then put it back in.
Press and hold the Volume Down button.
Insert a USB-C cable connected to the power (can either be a power outlet or a computer).
Release the Volume Down button as soon you boot into bootloader mode
For more details on how to erase the data on your FP4 refer this guide
I just try this and works great : power off the phone (if you can't just remove battery as said), press vol down and plug the usb cable
My phone has the bootloader locked and flashing locked and it works. try this
You are my hero.
I dont know how many times i read that but i was to stupid to do that correctly.
Now i tried it again and it worked well!
Thanks a lot!
Problem solved.
Just for other idiots like me, i choosed the option boot into ffbm into the bootloader menu, this was my mistake.
Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz
Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler
Moritz_pro said:
Hello comunity,
I installed TWRP on my Galaxy A72 to install Magisk but now I cant Boot any more. Please help my.
I hope you can help me. Moritz
Click to expand...
Click to collapse
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot
hey Idk Who can help me for SPOOF(Change by random TEXT) Any android 5.1 to Android8's BASEBRAND Version and KERNEL Version ? How I can change it ? Phone ROOTED and XPosed module ready(not Virtual xposed) ? Please find it or Create new Xposed APK or SUPERuser(ROOT right) APK for Change BASEBRAND and Kernel Version,You know it writes under settings/about phone,Everything changing exclude these.Please Helpme,or if i can do this manually from which file /system or where ?
ineedstoplaggerwatchers said:
Probably you flashed TWRP image at "fastboot boot TWRPLOL.img" this happens it . now do this,fastboot flash recovery YourTWRP.img then type fastboot reboot then Get your orginal boot.IMG from your Phone version's firmare folder by 7zip or winrar. then do fastboot flash boot boot.img then type fastboot reboot
Click to expand...
Click to collapse
I'm not sure if I am understanding all what you are saying right, so please tell me more detailed so I dont't make it worse.
turn of ur phone by holding power button 15 second then wait and be sure phone will not try reboot,then
Press and hold the Power, Volume Down and Home buttons for seconds;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Then the device will be the fastboot mode.
get this file then open it (Try open it by 7zip or winrar then extract it there),then click startCMD then type fastboot commands that i talked about it. but first type "fastboot devices" for be sure if it see your fastboot mode phone....... download this https://dl.twrp.me/a72q/twrp-3.6.2_11-1-a72q.img then rename it recovery(Right click on file then click properties and be sure if it says type of file: img file , so fullfile name must be recovery.img then put it into Adb&FastbootCommnderPrayForMe folder then enter this command "fastboot flash recovery recovery.img" then type fastboot reboot then remove cable quick,try power on ur phone, if it still stuck on boot then Poweroff by holding power button 15 second then 2 second later press power button by Volume Up Button together after 3 second later unpress power then continue holding volume up button,If twrp menu opened,swipe right adn go Wipe menu and ONLY chose Clear Cache , then restart phone . if still stuck then go Adb&FastbootCommnderPrayForMe folder and copy recovery.img file to same place and rename it boot(full file name must be boot.img), then go open command then type "fastboot flash boot boot.img" after enter it,Then type fastboot reboot and enter it. if still do same . then Find ur firmware's actual boot.img from your phone device model's firmare version File(firmware versions around 2GB to 10GB)'s boot.img . u can find it in internet too.Hope all works and i will be happy for u too
when I type Fastboot devices my Phone is not regionized what should I do?
Normally PC does not find your device as MTP device while you Hold POWER+home+volumeDown button(I mean fastboot mode without phone bootup).Coz it Shows device as MTP device after Phone bootedup(online).Maybe you tried install its driver as MTP by chosing manual install ? first download and install real usb driver(Adb&fastboot driver) of your samsung phone. https://developer.samsung.com/android-usb-driver then install it. then replug ur phone. Then go Device Manager of your PC,then replug your usb cable,and if you see New Device found like "unknow device or fastboot" then click them then click Properties on it, then click Update driver then click browse for Driver then click Let me pick from list then UNCHECK(unclick) "Show compatible hardware" then find your SAMSUNG ADB driver(if u cant see then click PORTS maybe it installed under Ports drivers) then click next to update it as Fastboot driver . but You can change your PC language to English for See same words in your Pc menus for I help you better coz im not German . but if already your secreen opens ? then you need go phone Settings / about phone/ Tap your phone Firm version 10 times and enable developer menu then enable USB ADB debug for install adb driver easily.if your phone screen not showing anything on screen . then you must just do fastboot mode by fastboot mode keys for install fastboot(samsung android usb driver or ADB driver another name)
When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.
Moritz_pro said:
When I am in the recovery mode then I see the MTP Window. When I am in the Download Mode I see the other window. I don't now waht the fastboot mode is.
Click to expand...
Click to collapse
Ignore what the other guy said above, fastboot is not a thing on Samsung phones. You can make it work with some patches however, but by default there is no fastboot.
ok can you tell me in detail so what do you think is the problem and wehre can I find these patches
Simon1511 said:
Did you follow all the steps on the XDA thread?
If yes, it could be possible that you additionally need to flash services disabler
Click to expand...
Click to collapse
There should be no issues if properly following the XDA thread's instructions.
Moritz_pro said:
ok can you tell me in detail so what do you think is the problem and wehre can I find these patches
Click to expand...
Click to collapse
Thank you for remaining me this option I forgot about it, but I installed a custom Rom, but I'd like to run again on the original software can I install it again. If not, it doesn't matter, but it would be better.
The Rom won't start, the start sign appears but doesn't finish loading.
[ROM][12.1][ENCRYPTION][EOL] LineageOS 19.1 for A52 4G and A72
LineageOS is a free, community built, aftermarket firmware distribution of Android 12.1/12L, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with...
forum.xda-developers.com