Hi,
I have xiaomi mi 10T Pro Global - miui 12.1.5 Global (Android 11)
My big problem is listening to music in the car.
It keeps pausing every couple of seconds and then reconnects.
I looked for some information on the internet. They proposed: put in airplane mode, reboot and format the cell, which I just did. I have not found any benefit.
Now I wait 7 days to have the unlock code sent to me, but it seems drastic as what.
Do you have any advice to help me?
On my Mi10T Pro the OTA update from Android 10 had all sorts of problems and I had to Factory Reset to get it going. Now it mostly works well, including bluetooth completely stable on headphones and car.
chisnz said:
On my Mi10T Pro the OTA update from Android 10 had all sorts of problems and I had to Factory Reset to get it going. Now it mostly works well, including bluetooth completely stable on headphones and car.
Click to expand...
Click to collapse
very lucky you don't update to android 11. A very buggy update
Related
Phone is Redmi Note 2, smartwatch is Moto 360.
Devices are paired but Bluetooth keeps disconnecting after a while - on smartwatch i have an icon of a cloud with strikethrough. Restarting and re-pairing helps but also - for a while.
I know this is MIUI problem because on unnofficial AOSP this problem does not exists.
Reported this in the bugs section on official MIUI forum but maybe someone knows some workaround. They don't seem to care much :/
Clean install of MIUI 5.10.15
Please help!
Hi all,
I have been using LineageOS 14.1 on my Moto G5 for the past year without any issues. However, of late, I am having problems with the audio. I can't figure out what is happening or why it is happening. What has happened is that the phone speaker is not working at all. No matter what I do, whether it is taking a call, listening to media files, or playing videos on YT or in the browser, I cannot hear anything at all. I can hear the audio if I plug in a headset. I have never had this problem before and then it suddenly popped up a few weeks ago. Thinking it was a major problem and wanting to upgrade, I wiped the ROM and installed LOS 15.1. That got the speaker working but it was giving me other issues so I went back to 14.1 about two weeks back. The speaker was working fine until today when it has died yet again. I have tried restarting but it hasn't fixed the issue. Is this a know bug? Is there any standard way of dealing with the issue? After the last time I needed to reimage my phone, I have been taking regular backups so I can do yet another reimaging and reinstall everything but I really don't want to do that. Please help.
Update: I did a factory reset, did a fresh reinstall of OS 14.1 but still no sound Please help!
aksnitd said:
Hi all,
I have been using LineageOS 14.1 on my Moto G5 for the past year without any issues. However, of late, I am having problems with the audio. I can't figure out what is happening or why it is happening. What has happened is that the phone speaker is not working at all. No matter what I do, whether it is taking a call, listening to media files, or playing videos on YT or in the browser, I cannot hear anything at all. I can hear the audio if I plug in a headset. I have never had this problem before and then it suddenly popped up a few weeks ago. Thinking it was a major problem and wanting to upgrade, I wiped the ROM and installed LOS 15.1. That got the speaker working but it was giving me other issues so I went back to 14.1 about two weeks back. The speaker was working fine until today when it has died yet again. I have tried restarting but it hasn't fixed the issue. Is this a know bug? Is there any standard way of dealing with the issue? After the last time I needed to reimage my phone, I have been taking regular backups so I can do yet another reimaging and reinstall everything but I really don't want to do that. Please help.
Click to expand...
Click to collapse
Does the sound work with the stock Nougat/Oreo?
Andrej_SK said:
Does the sound work with the stock Nougat/Oreo?
Click to expand...
Click to collapse
Hey,
I have never used the phone with the stock ROM. I bought it over a year ago and immediately installed 14.1. I can tell you the speaker was working both on the stock ROM out of the box and on 14.1 as well. It ran perfectly fine till a month ago when the speaker stopped working out of the blue. I did a factory reset and installed 15.1 and the speaker started working again. Then I went back to 14.1 a week later as mentioned. The speaker was working fine till yesterday when it conked out again. After that, I did a factory reset and reinstalled 14.1 which didn't fix it.
Sorry if I'm repeating myself too much, I'm just trying to give a clear timeline of events. Right now, I am using the phone with my handsfree. Everything other than the speaker is working. I can make calls and listen to media on my headset, just not on the speaker.
If you need me to run any diagnostics or terminal commands for testing, let me know. I would very much like to resolve this without another reinstall if possible.
Second update - I was so sure this was a software issue that I didn't even bother to check the hardware. Turns out the G5 has a contact problem with the speaker which has to be fixed by squeezing the top half of the phone to get it to make better contact. I did that and problem solved. Consider this thread closed.
Sinds a few day/a week my Samsung S20 with all latest updates installed is rebooting when connecting to my car with Android Auto. The S10 of my wife is still working fine.
Today tested with another Samsung S20 and this one has the same issue.
Also tried clearing cache and rebooting in safe mode but nothing seems to fix the problem.
Anyone can help?
wouterverboom said:
Sinds a few day/a week my Samsung S20 with all latest updates installed is rebooting when connecting to my car with Android Auto. The S10 of my wife is still working fine.
Today tested with another Samsung S20 and this one has the same issue.
Also tried clearing cache and rebooting in safe mode but nothing seems to fix the problem.
Anyone can help?
Click to expand...
Click to collapse
I'm facing the same issue with my S20 - only started happening in the last week. I have tested with two other phones and the headunit works perfectly. Also tested with another S20 and the phone just reboots
As a work around, I've installed headunit reloader until an update is released for it
Seems u have indeed exactly the same problem.
What does your workaround do? i'm little confused here
wouterverboom said:
Seems u have indeed exactly the same problem.
What does your workaround do? i'm little confused here
Click to expand...
Click to collapse
Sorry I bought the headunit reloaded app( it does an android auto emulator on your headunit)... but a friend sent me the fix this morning. It looks like its caused by the latest update to google chrome, if you uninstall the latest update it should fix your issue. I just tested and it worked for me ( There is a thread on another site about it )
Cool! This was the workaround for me 2 Now it's working again.
I am having the exact same problem. Right after the latest Verizon update. Plug it in to the Car and automatically reboots. After the major Android update, wireless AA stopped working. And now, Android Auto will not even load when plugged in. Charges fine outside the car. Looks like it's time to dump this super expensive POS phone. Too many issues are piling up
Hi I have recently bought a second hand redmi note 8 pro to use with a drone I have also recently purchased.
everything has been working fine. Until last night 21/07/21 I had a notification of the new miui 12.5 update. which I left to do its thing. The issue is the screen does not respond to touch. it appears to boot up ok gets to the screen shown. I have had it on fastboot screen and also wiped all data (can't seem to get mi assistance to work.)
Has anyone else had the update/ issue?
How would you recommend proceeding.
I have the same problem (Redmi Note 8 Pro Global - MI firmware). After updating from 12.0.8, the touchscreen stopped working.
I had to roll back through the fastboot. I also tried to flash version 12.5.1.0 via fastboot - the problem persists.
The phone had a replacement display module, but with an original one.
There is an idea to try to flash it with a version for Indonesia or China, but so far I have not tested it.
Issue with SIM selection for calling on MIUI 12.5 Global - Redmi Note 8 Pro
Anyone experiencing this bug with default SIM for call?
The Google Dialer will ask for which SIM to call on reboot even tho I already set it as SIM1 or SIM2 in the Settings.
The workaround is manually reselecting the SIM but only effective till next reboot.
Same exclusive Xiaomi Update Fail Forget about help or information from the official Support.
Connect a mouse with a USB-C to USB Adapter and backup your personal data.
I have exact same issue on this update. I also replaced the screen some time ago. I belive it's android 11 problem, because CFWs like PE doesn't work too. ROMs with Android 10 also seems weird to me, because digitizer keeps "jumping" and clicking random places. Android 9 - all works perfectly fine. I am going to find out which partition is used to use touchscreen and check if it's possible to flash it over PE ROM to solve the problems.
I have some problems after updating to MIUI 12.5.1:
1. Have to repeat the procedure twice for uploading any picture from gallery to anywhere on Internet. It doesn't work in first attempt.
2. Fingerprint sensor shows many errors off & on. 3-4 attempts to open the phone. Tried re-registering my fingers.
3. Option of Completely Hide Notch gone
4. While playing Facebook videos, sound continues, video stops.
Too annoying these bugs are.
AlphaBravo said:
I have some problems after updating to MIUI 12.5.1:
1. Have to repeat the procedure twice for uploading any picture from gallery to anywhere on Internet. It doesn't work in first attempt.
2. Fingerprint sensor shows many errors off & on. 3-4 attempts to open the phone. Tried re-registering my fingers.
3. Option of Completely Hide Notch gone
4. While playing Facebook videos, sound continues, video stops.
Too annoying these bugs are.
Click to expand...
Click to collapse
5. Battery drain ("...even on miui 12.5 battery drain too much high...")
Compass.
slashimi said:
I have exact same issue on this update. I also replaced the screen some time ago. I belive it's android 11 problem, because CFWs like PE doesn't work too. ROMs with Android 10 also seems weird to me, because digitizer keeps "jumping" and clicking random places. Android 9 - all works perfectly fine. I am going to find out which partition is used to use touchscreen and check if it's possible to flash it over PE ROM to solve the problems.
Click to expand...
Click to collapse
Just now,i found that the user Wai_Yan
slashimi said:
I have exact same issue on this update. I also replaced the screen some time ago. I belive it's android 11 problem, because CFWs like PE doesn't work too. ROMs with Android 10 also seems weird to me, because digitizer keeps "jumping" and clicking random places. Android 9 - all works perfectly fine. I am going to find out which partition is used to use touchscreen and check if it's possible to flash it over PE ROM to solve the problems.
Click to expand...
Click to collapse
Yes, the great manufacturer has kept its information behind the mountain. I have just found a contribution to this in the mi community.
It only briefly mentions that repairs should be made with an official display. I also do not understand why Xiaomi makes such a secret of it and does not give the reasons. Link
I have installed the Global 12.0.5 Stable QGGEUXM and I am also aware of these display anomalies.
Do you have any results in the project?
Boo-Kah-Kee said:
Just now,i found that the user Wai_Yan
Yes, the great manufacturer has kept its information behind the mountain. I have just found a contribution to this in the mi community.
It only briefly mentions that repairs should be made with an official display. I also do not understand why Xiaomi makes such a secret of it and does not give the reasons. Link
I have installed the Global 12.0.5 Stable QGGEUXM and I am also aware of these display anomalies.
Do you have any results in the project?
Click to expand...
Click to collapse
I've tested all partitions but any of them seems to be changing display driver. So sorry, no luck there, I think we're stuck with android 9. It looks like it is hard-coded into firmware.
slashimi said:
I've tested all partitions but any of them seems to be changing display driver. So sorry, no luck there, I think we're stuck with android 9. It looks like it is hard-coded into firmware.
Click to expand...
Click to collapse
I noticed a break in a layer of the display within 14 days of use. There was no heavy use or pressure on the display. Xiaomi - K.O.
How to bring back the option of "Completely Hide the Notch" in MIUI 12.5.1?
I have just realised I didn't update. I was having lots of trouble fixing this. I think my reply from xiaomi was wait for the next update this might fix it.
Thank you to Boo-Kah-Kee, I never knew you could plug a mouse in.
anyway I eventually got it back to the prievious rom by following this Video.
No more updates it works fine.
Hi everyone, I bought a OP11 Jupiter version from China and flash it from ColorOS to OxygenOS CPH2447_11_A.09. I've use it for a while and found some critical bugs like:
1. Auto brightness not working all time
2. Wake up screen but super laggy refresh rate (Randomly)
3. No response after screen off and need to long press power button to restart (Randomly)
4. Fingerprint sensor not working in always-on-display (Randomly)
4. Camera lagging when using social media apps (Randomly)
Waiting a stable OxygenOS ROM update for China version.
A10 is out today, just upgraded on mine through oxygen updater.
RHodgett said:
A10 is out today, just upgraded on mine through oxygen updater.
Click to expand...
Click to collapse
Any bugs?
I can't update through oxygen update I got failed I try both small and full update
Michaeljaiv3v said:
Hi everyone, I bought a OP11 Jupiter version from China and flash it from ColorOS to OxygenOS CPH2447_11_A.09. I've use it for a while and found some critical bugs like:
1. Auto brightness not working all time
2. Wake up screen but super laggy refresh rate (Randomly)
3. No response after screen off and need to long press power button to restart (Randomly)
4. Fingerprint sensor not working in always-on-display (Randomly)
4. Camera lagging when using social media apps (Randomly)
Waiting a stable OxygenOS ROM update for China version.
Click to expand...
Click to collapse
Maybe a proper way to fix issues after converting Color to Oxygen
Tian San Ying(天伞桜) proposed that if there is no discernible hardware change between the Chinese and foreign versions of OnePlus 11, then the issue of converting Color OS to Oxygen OS may be caused by software issues. Previously, the...
forum.xda-developers.com
Have you tried this? It may solve all the problems listed. Let me know if it solves the randomly restart problem, thanks.
jinglei207 said:
Maybe a proper way to fix issues after converting Color to Oxygen
Tian San Ying(天伞桜) proposed that if there is no discernible hardware change between the Chinese and foreign versions of OnePlus 11, then the issue of converting Color OS to Oxygen OS may be caused by software issues. Previously, the...
forum.xda-developers.com
Have you tried this? It may solve all the problems listed. Let me know if it solves the randomly restart problem, thanks.
Click to expand...
Click to collapse
Can I get official update after flashing this?
Also, I found that there is a bug after A09 to A10.
For example, when I tap something in the telegram, the tapped item should be greyed shortly. But I cannot see this....
nonegor said:
Can I get official update after flashing this?
Also, I found that there is a bug after A09 to A10.
For example, when I tap something in the telegram, the tapped item should be greyed shortly. But I cannot see this....
Click to expand...
Click to collapse
Based on what author said, you should be able to directly install official updates.
Did you factory reset your smartphone?
Let me know if it still randomly shuts off.
I have PB110 512GB, and the seller did flash the oxygen os (CPH2447_11_A.06) for me. My oneplus 11 is NOT ROOTED, and bootloader is NOT UNLOCKED, I cannot afford to lose security over unlocked bootloader
I cannot get any incremental updates so far and is stucked on A.06 for some time now. HOWEVER, I managed to find some workarounds some of the bugs, and my oneplus 11 is serving me as my daily driver, without TOO MUCH issue, it is now "quite stable".
From the said issue :
1. Auto brightness not working all time
2. Wake up screen but super laggy refresh rate (Randomly)
TURN OFF auto brightness and uses MANUAL brightness.
ALSO, DO NOT, I REPEAT DO NOT use QHD, STICK IT TO FHD mode, NOT STANDARD, but FHD MODE for displays, RESTART your phone if you get resolution after switching to FHD. FHD will eventually FIX some of the issues like FLASHY LOCK SCREEN, and other issues.
YOUTUBE LAG/OTHER FPS ISSUES : Use SETEDIT and adjust Peak Refresh from 120.001 fps to 59.99 fps, this will fix most of the stutering issue
3. No response after screen off and need to long press power button to restart (Randomly)
This bugs is seems to be NOTIFICATIONS. You have to CLEAR NOTIFICATIONS from time to time, DO NOT let notifications hanging and keep pushing too much into your notification bar, once a treshold is hit, the lock screen will crash and causes you need to REBOOT by pressing power button to restart
4. Fingerprint sensor not working in always-on-display (Randomly)
This got no fix, HOWEVER,off and on the screen will fix the issue, NOT a big deal.
4. Camera lagging when using social media apps (Randomly)
I dont use the social media camera that much often but I didnt see issue in using camera in whatsapp.
jinglei207 said:
Based on what author said, you should be able to directly install official updates.
Did you factory reset your smartphone?
Let me know if it still randomly shuts off.
Click to expand...
Click to collapse
No, nothing problem after update and install the ocdt.
NO randomly shut off
nonegor said:
No, nothing problem after update and install the ocdt.
NO randomly shut off
Click to expand...
Click to collapse
Did you get the pop-up about how the device is from China.
acm1108 said:
Did you get the pop-up about how the device is from China.
Click to expand...
Click to collapse
what pop-up?
I didn't receive about that