Develop Bugs

Treble TWRP Recovery 3.2.2 with different options

Hi, guys.
I have the indian stock rom (2.5.104 ST) and i decided to install a custom rom (Pixel Experience by Rodrigues). Then, i unlocked the bootloader and installed the twrp 3.2.2, but, when i get into recovery mode, there's only 3 options:
- Reboot
- Insttal Update Package
- Power off
How can i get the normal interface, with the regular options?
Thanks!

lucasmb27 said:
Hi, guys.
I have the indian stock rom (2.5.104 ST) and i decided to install a custom rom (Pixel Experience by Rodrigues). Then, i unlocked the bootloader and installed the twrp 3.2.2, but, when i get into recovery mode, there's only 3 options:
- Reboot
- Insttal Update Package
- Power off
How can i get the normal interface, with the regular options?
Thanks!
Click to expand...
Click to collapse
You haven't installed twrp.

After unlocking the bootloader, the very next step is installing the twrp, right? And i can do this in the indian version?
Also, i've installed the 3.1 after that, by flashing in the minimal adb and the same screen, with these 3 options appeared again... :/
Thanks!

lucasmb27 said:
After unlocking the bootloader, the very next step is installing the twrp, right? And i can do this in the indian version?
Also, i've installed the 3.1 after that, by flashing in the minimal adb and the same screen, with these 3 options appeared again... :/
Thanks!
Click to expand...
Click to collapse
Follow guide from kuber Sharma.. sticky thread in roms and guide section

I followed this guide: https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Founded in kubersharma topic
But I used this TWRP version (https://forum.xda-developers.com/le...lus-treble-roms-flashing-reverting-t3778287): treble-TWRP 3.2.2 v2
If TWRP is not installed, should i try again? Starting after the bootloader unlocking step? Is there any problem?
I'm confused, because there's these 2 guide topics... i don't know if i only have to do the bootloader unlocking + trwp + supersu or if i have to flash this factory2vendor...
Thanks!

lucasmb27 said:
I followed this guide: https://forum.xda-developers.com/lenovo-zuk-z2/how-to/z2-z2-plus-bootloader-unlock-twrp-t3615283
Founded in kubersharma topic
But I used this TWRP version (https://forum.xda-developers.com/le...lus-treble-roms-flashing-reverting-t3778287): treble-TWRP 3.2.2 v2
If TWRP is not installed, should i try again? Starting after the bootloader unlocking step? Is there any problem?
I'm confused, because there's these 2 guide topics... i don't know if i only have to do the bootloader unlocking + trwp + supersu or if i have to flash this factory2vendor...
Thanks!
Click to expand...
Click to collapse
Use treble version 3.2.1 dmg... Don't use SuperSU.. use magisk..better compatibility with latest security patches

sanjay.2704 said:
Use treble version 3.2.1 dmg... Don't use SuperSU.. use magisk..better compatibility with latest security patches
Click to expand...
Click to collapse
I'm searching a tutorial, but still didn't found...
And the Factory2Vendor? Is not necessary?
Thanks!

lucasmb27 said:
I'm searching a tutorial, but still didn't found...
And the Factory2Vendor? Is not necessary?
Thanks!
Click to expand...
Click to collapse
What have u done till now?? Are u getting the warning screen when u power up phone?
Have unlocked bootloader?

sanjay.2704 said:
What have u done till now?? Are u getting the warning screen when u power up phone?
Have unlocked bootloader?
Click to expand...
Click to collapse
I've unlocked the bootloader (i'm getting the warning screen when i power up) and tried to install the treble trwp 3.2.2... but, in the first reply, sharvanpn said that i haven't installed the trwp, so...
i was reading that i have to install the 2.8 version first... anyway

lucasmb27 said:
I've unlocked the bootloader (i'm getting the warning screen when i power up) and tried to install the treble trwp 3.2.2... but, in the first reply, sharvanpn said that i haven't installed the trwp, so...
i was reading that i have to install the 2.8 version first... anyway
Click to expand...
Click to collapse
Go to recovery from that start page .. if u can see twrp then u have twrp..
If u cannot see twrp then u don't have twrp..
Use this link.
https://androidfilehost.com/?w=files&flid=256191
The first twrp is simple non treble twrp.
Flash that... Reboot to phone.. reboot recovery.. flash factory2vendor.. after that flash the second dmg treble twrp.. reboot to recovery.. done.. now u can flash treble and non treble roms..
don't know about pie as still on oero

sanjay.2704 said:
Go to recovery from that start page .. if u can see twrp then u have twrp..
If u cannot see twrp then u don't have twrp..
Use this link.
https://androidfilehost.com/?w=files&flid=256191
The first twrp is simple non treble twrp.
Flash that... Reboot to phone.. reboot recovery.. flash factory2vendor.. after that flash the second dmg treble twrp.. reboot to recovery.. done.. now u can flash treble and non treble roms..
don't know about pie as still on oero
Click to expand...
Click to collapse
Thanks a lot, Sanjay! It finally worked! The problem was that i needed the simple twrp at first.
I'm using pixel experience 9.0.
Thanks again!

lucasmb27 said:
Thanks a lot, Sanjay! It finally worked! The problem was that i needed the simple twrp at first.
I'm using pixel experience 9.0.
Thanks again!
Click to expand...
Click to collapse
Any issues with pixel 9.0?
Enviado do meu Z2 Plus através do Tapatalk

imarco.box said:
Any issues with pixel 9.0?
Enviado do meu Z2 Plus através do Tapatalk
Click to expand...
Click to collapse
Not a single one!
I've installed the rom, magisk, fingerprint fix, u-touch mod and disabled the soft nav bar. It's perfect!

sanjay.2704 said:
Go to recovery from that start page .. if u can see twrp then u have twrp..
If u cannot see twrp then u don't have twrp..
Use this link.
https://androidfilehost.com/?w=files&flid=256191
The first twrp is simple non treble twrp.
Flash that... Reboot to phone.. reboot recovery.. flash factory2vendor.. after that flash the second dmg treble twrp.. reboot to recovery.. done.. now u can flash treble and non treble roms..
don't know about pie as still on oero
Click to expand...
Click to collapse
Hey, do we have to flash the factory2vendor and the treble twrp through PC or through the simple twrp?

Axoser said:
Hey, do we have to flash the factory2vendor and the treble twrp through PC or through the simple twrp?
Click to expand...
Click to collapse
both can be done through twrp.
first F2V and then treble twrp... reboot to twrp from twrp.. done.. ready to flash treble roms and non treble roms as well.. no need to do v2f and non treble twrp again.

Redmi Note 5 Global Version (MEE7S) how to flash TWRP?

can anyone tell me how to flash TWRP on my redmi note 5 global version? I've tried searching and it does not work after entering fastboot flash twrp.img on cmd fastboot mode. Thanks in advance guys

goodygoods said:
can anyone tell me how to flash TWRP on my redmi note 5 global version? I've tried searching and it does not work after entering fastboot flash twrp.img on cmd fastboot mode. Thanks in advance guys
Click to expand...
Click to collapse
Have you unlocked the bootloader yet? Do you get a success/failure when you try to flash using fastboot? Do you have twrp.img in the same folder as fastboot.exe?

goodygoods said:
can anyone tell me how to flash TWRP on my redmi note 5 global version? I've tried searching and it does not work after entering fastboot flash twrp.img on cmd fastboot mode. Thanks in advance guys
Click to expand...
Click to collapse
go to masik thread and in 2nd post download 1click twrp installation

goofball2k said:
Have you unlocked the bootloader yet? Do you get a success/failure when you try to flash using fastboot? Do you have twrp.img in the same folder as fastboot.exe?
Click to expand...
Click to collapse
yep, bootloader is already unlocked and no, haven't seen the result of flashing if it succeeded or failed cause it only said waiting for device

goodygoods said:
yep, bootloader is already unlocked and no, haven't seen the result of flashing if it succeeded or failed cause it only said waiting for device
Click to expand...
Click to collapse
Sounds like you need to update the fastboot drivers. While the device is in fastboot, go to device manager and look for an unknown device that is probably your phone. You'll need to update the drivers to have it show Android Bootloader Interface.

goofball2k said:
Sounds like you need to update the fastboot drivers. While the device is in fastboot, go to device manager and look for an unknown device that is probably your phone. You'll need to update the drivers to have it show Android Bootloader Interface.
Click to expand...
Click to collapse
there was an error while I flashed twrp, it said about anti rollback fail, can you guys help me how to flash twrp on this?

goodygoods said:
there was an error while I flashed twrp, it said about anti rollback fail, can you guys help me how to flash twrp on this?
Click to expand...
Click to collapse
I think method 1 is what you need to do
https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219

goofball2k said:
I think method 1 is what you need to do
https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219
Click to expand...
Click to collapse
which img should I download from this? the stable or the beta? I'm on miui 10 by the way

[GUIDE] How to change China ROM to Global ROM. TWRP and more...

Please leave "Thanks" if this thread helped you.
________________________________________
LEGEND :
(RECOVERY) : ZIP FILE FLASHED via TWRP
(FASTBOOT) : .IMG FILES FLASHED via MiFLASH
(TWRP) : Recovery .IMG file flashed via Fastboot
________________________________________
OTHER USEFULL FILES FOUND :
MIUIPRO.NET MIUI 11 9.10.10 ( RECOVERY ) : https://mega.nz/#!M8hXEYAC!e6BxOr5HngCmfNSCOo4ZVmkTKgkU8KUheaOkrKAOHyo
MIUIPRO.NET TWRP : https://mega.nz/#!004lWKjD!V2ZAWBv9zjMaNISkOAnuUlBzzet1QFIsEXFHBVFlaoM
________________________________________
Prequisites :
FASTBOOT + RECOVERY+BOOT : https://mega.nz/#!kpx2wIbY!sxWOxoRGjXribkqMuNSjJCIk94bhrf4M5MSdWpztspE
MiFLASH for REDMI NOTE 8 PRO : https://mega.nz/#!RpxkzSoK!UunxanbaWOkPVYq_NAJakWbc2D0lDygPuTNCc-OO2Og
LATEST EEA ( GLOBAL ) REDMI NOTE 8 PRO FIRMWARE : https://mega.nz/#!p8RDiCRB!2lSEAbtV364L61ZXd_tfAbs53AlsRjmQWa53JRE9BoU
________________________________________
1. Unlock bootloader.
2. Open the MiFLASH, and connect your phone via USB in Fastboot mode.
3. Your phone should be on the list of connected devices.
4. Click on "Browse" -> "Advenced|" and localize file : flash_all_except_data_storage.bat from downloaded FIRMWARE folder.
5. Click FLASH and wait patiently.
6. Phone will Reboot and wait patiently.
7. DONE
________________________________________
Q&A
Does TWRP from that chinese forum presist after flashing ?
No. Phone will go back to original RECOVERY after 2nd restart.
Does that TWRP is functional with REDMI NOTE 8 PRO ?
Some functions may work, some not.
Installing root with this TWRP will cause bootloop.
When something go wrong....
If you end up with BOOTLOOP, for any reason ( Magisk etc. )
Just flash boot.img from FASTBOOT + RECOVERY+BOOT and bring your phone back to life.
This boot.img was extracted from firmware linked above.
_____
Command : fastboot flash boot boot.img
_____
See also :
[GUIDE] How to increase cellular reception strenght in Redmi Note 8 Pro : https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-how-to-increase-cellular-t3987515

Why with TWRP? We can't use MI flash?
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
I am download MI global rom, and want to flash it instead if my EU rom that I have.
I try to unlock bootloader but must wait 52 hours more..
But I wanted to do it with Mi flash tools..can I do that?

Decryption key for mega links?
Decryption key for mega links?

tze_vitamin said:
Why with TWRP? We can't use MI flash?
---------- Post added at 06:59 PM ---------- Previous post was at 06:58 PM ----------
I am download MI global rom, and want to flash it instead if my EU rom that I have.
I try to unlock bootloader but must wait 52 hours more..
But I wanted to do it with Mi flash tools..can I do that?
Click to expand...
Click to collapse
Yes, I have also done it with Mi flash tools.

polfrank said:
So, I guess we have found a way to install twrp and it persists after flashing.
How about magisk? Does it still lead to bootloop efter following this process with twrp?
And how do we do a system update after at have twrp installed?
Click to expand...
Click to collapse
i was not able to install magisk, tried it several times yesterday.

astrakid said:
i was not able to install magisk, tried it several times yesterday.
Click to expand...
Click to collapse
Ok, thanks for reporting. I guess that Magisk just does not support our phone yet.
I have also tested Magisk v20 and got bootloop.

nakedowl said:
Personal note :
It may be possible to flash that chinese TWRP permanently, by replacing recovery.img in firmware images.
And flash it with MiFLASH.
Click to expand...
Click to collapse
Hey, it isn't working. error:"Flash recovery error"

polfrank said:
Yes, I have also done it with Mi flash tools.
Click to expand...
Click to collapse
Are you using the note 8 pro?
If yes, then it is fully supported by mi flash? I think it's the safest way to flash stock rom right now because you don't have to unlock the boot loader just to flash global or china rom.

enzy29 said:
Are you using the note 8 pro?
If yes, then it is fully supported by mi flash? I think it's the safest way to flash stock rom right now because you don't have to unlock the boot loader just to flash global or china rom.
Click to expand...
Click to collapse
I think that you have to unlock the BL first before you can access fastboot flashing, even with mi flash.l

enzy29 said:
Are you using the note 8 pro?
If yes, then it is fully supported by mi flash? I think it's the safest way to flash stock rom right now because you don't have to unlock the boot loader just to flash global or china rom.
Click to expand...
Click to collapse
polfrank said:
I think that you have to unlock the BL first before you can access fastboot flashing, even with mi flash.l
Click to expand...
Click to collapse
Unlock bootloader before use Mi flash. Trust me. You don't want to resurrect phone via adl mode

polfrank said:
I guess that Magisk just does not support our phone yet.
Click to expand...
Click to collapse
I use MIUI 11 9.10.17 (MiuiPro edition) for Redmi Note 8 Pro. Magisk work without problem (19.3). Some screenshots for you (Greek Translation by Spiros Kaparos) in attachment.

BusnjukAn said:
I use MIUI 11 9.10.17 (MiuiPro edition) for Redmi Note 8 Pro. Magisk work without problem (19.3). Some screenshots for you (Greek Translation by Spiros Kaparos) in attachment.
Click to expand...
Click to collapse
please give links, thanks

BusnjukAn said:
I use MIUI 11 9.10.17 (MiuiPro edition) for Redmi Note 8 Pro. Magisk work without problem (19.3). Some screenshots for you (Greek Translation by Spiros Kaparos) in attachment.
Click to expand...
Click to collapse
how did you install magisk? it is not working for me with original miui global 10.4.2.

astrakid said:
how did you install magisk? it is not working for me with original miui global 10.4.2.
Click to expand...
Click to collapse
The ROM is based on the Chinese beta version 9.10.17 Miui 11 and the Magisk is integrated into the ROM. Just flashed the archive with ROM from TWRP. I do not have a direct link to ROM - I downloaded it from the OTA server. You need to ask on the developers site.

BusnjukAn said:
The ROM is based on the Chinese beta version 9.10.17 Miui 11 and the Magisk is integrated into the ROM. Just flashed the archive with ROM from TWRP. I do not have a direct link to ROM - I downloaded it from the OTA server. You need to ask on the developers site.
Click to expand...
Click to collapse
Which ota server is it? Which developer site?

polfrank said:
Which developer site?
Click to expand...
Click to collapse
https://miuipro.info

BusnjukAn said:
https://miuipro.info
Click to expand...
Click to collapse
There is no links to Redmi Note 8 Pro ROM

https://www.staygyan.in/miui-11-beta-update-9-10-17-for-xiaomi-devices-download-links/

robbie_lpl said:
https://www.staygyan.in/miui-11-beta-update-9-10-17-for-xiaomi-devices-download-links/
Click to expand...
Click to collapse
Is this the one that is pre rooted with magisk?

nakedowl said:
Hello everyone,
I recently decided to have a go with swapping from Chinese ROM to Global ROM.
________________________________________
Prequisites :
FASTBOOT + RECOVERY+BOOT : https://mega.nz/#!kpx2wIbY!sxWOxoRGjXribkqMuNSjJCIk94bhrf4M5MSdWpztspE
MiFLASH for REDMI NOTE 8 PRO : https://mega.nz/#!RpxkzSoK!UunxanbaWOkPVYq_NAJakWbc2D0lDygPuTNCc-OO2Og
LATEST EEA ( GLOBAL ) REDMI NOTE 8 PRO FIRMWARE : https://mega.nz/#!p8RDiCRB!2lSEAbtV364L61ZXd_tfAbs53AlsRjmQWa53JRE9BoU
________________________________________
1. Unlock bootloader.
2. Open the MiFLASH, and connect your phone via USB in Fastboot mode.
3. Your phone should be on the list of connected devices.
4. Click on "Browse" -> "Advenced|" and localize file : flash_all_except_data_storage.bat from downloaded FIRMWARE folder.
5. Click FLASH and wait patiently.
6. Phone will Reboot and wait patiently.
7. DONE
________________________________________
Q&A
Does TWRP from that chinese forum presist after flashing ?
No. Phone will go back to original RECOVERY after 2nd restart.
Does that TWRP is functional with REDMI NOTE 8 PRO ?
Some functions may work, some not.
Installing root with this TWRP will cause bootloop.
When something go wrong....
If you end up with BOOTLOOP, for any reason ( Magisk etc. )
Just flash boot.img from FASTBOOT + RECOVERY+BOOT and bring your phone back to life.
This boot.img was extracted from firmware linked above.
_____
Command : fastboot flash boot boot.img
_____
Personal note :
It may be possible to flash that chinese TWRP permanently, by replacing recovery.img in firmware images.
And flash it with MiFLASH.
Click to expand...
Click to collapse
Does the TWRP and Magisk required to flash the global rom? Or if i flash your files via Mi flash it will flash only Stock Global Rom?

Flashing TWRP and rooting chinese variant phone with global Rom

I bought my redmi note 8 pro in China with a chinese version, then a few days ago i flashed a global rom with fastboot on the device.Then I tried to flash TWRP recovery and i did everything correctly but my phone doesn’t boot and go twrp directly repeatedly. Then i unroot from TWRP and it was normal again but there is no recovery now, not the stock as well but fastboot works. Now can you guys suggest me how to flash TWRP recovery on this and how to root this? Thanks in advance..

There is a threat for this

F3F3 said:
There is a threat for this
Click to expand...
Click to collapse
Link please?

You need to close avb and remove force encrypt

wang1chung said:
You need to close avb and remove force encrypt
Click to expand...
Click to collapse
Is there any thread where it is written step by step? Because i am not that much advanced user.

rubel623 said:
Is there any thread where it is written step by step? Because i am not that much advanced user.
Click to expand...
Click to collapse
Step 9 and 10, but this guide only works with LR TWRP
https://c.mi.com/thread-2735547-1-0.html

How to relock and restore original fw?

Hello everyone. I tried relock the bootloader, but when the process finished it gave me the error "The system has been destroyed". I unlocked it again and retried the procedure with the same result. Do you have any idea what's the problem? Thank you.

I am quite surprised that it allowed you to unlock it again.
Anyway, are you sure that you have 100% stock ROM? Including, but not limited to system, boot and recovery partitions?

_mysiak_ said:
I am quite surprised that it allowed you to unlock it again.
Anyway, are you sure that you have 100% stock ROM? Including, but not limited to system, boot and recovery partitions?
Click to expand...
Click to collapse
I flashed the original fastboot rom. I try first whit the command 'flash all" successfully. Then i try "flash all and lock" and compare error message. Fortunately in the fastboot mode i unlock again. Sorry for bad english.

xire68 said:
I flashed the original fastboot rom. I try first whit the command 'flash all" successfully. Then i try "flash all and lock" and compare error message. Fortunately in the fastboot mode i unlock again. Sorry for bad english.
Click to expand...
Click to collapse
After flashing, can you start the phone? Does it boot completely to the welcome screen?

_mysiak_ said:
After flashing, can you start the phone? Does it boot completely to the welcome screen?
Click to expand...
Click to collapse
When I "flash all" start normally.
When I "flash all and lock" bootloop

Did you have a custom ROM installed before? If so, which one?

_mysiak_ said:
Did you have a custom ROM installed before? If so, which one?
Click to expand...
Click to collapse
Yes, xiaomi.eu, Arrows, lineage OS and dotOS, evidently one of these ROM has corrupted the system files. With other models I have never had similar problems (redmi note 7, note 8t etc ...)

xire68 said:
Yes, xiaomi.eu, Arrows, lineage OS and dotOS, evidently one of these ROM has corrupted the system files. With other models I have never had similar problems (redmi note 7, note 8t etc ...)
Click to expand...
Click to collapse
The only thing which comes to my mind is that there might be some partition which has been modified by custom ROM, but did not get reflashed with stock image. You will probably need to check installation script of all ROMs which you tried to check which partitions are overwritten and compare it with stock ROM flashing script.

_mysiak_ said:
The only thing which comes to my mind is that there might be some partition which has been modified by custom ROM, but did not get reflashed with stock image. You will probably need to check installation script of all ROMs which you tried to check which partitions are overwritten and compare it with stock ROM flashing script.
Click to expand...
Click to collapse
Ok thanks for support.

Xiaomi Provides Flashable ROMs of MIUI Updates for all its Devices
Step 1: Download MIUI Fastboot ROM for your Device.
Step 2: Extract the ROM package on your Computer.
Step 3: Boot your device into Fastboot Mode.
Step 4: Launch Mi Flash Tool on the Computer.
Step 5: Install Xiaomi USB Drivers (if Required)

xire68 said:
When I "flash all" start normally.
When I "flash all and lock" bootloop
Click to expand...
Click to collapse
xire68 said:
When I "flash all" start normally.
When I "flash all and lock" bootloop
Click to expand...
Click to collapse
here is a guide

Mi flash let's you lock the bootloader again

No
Mi Flash
1.clean all - flash_all.bat
2.save user data - flash_all_except_storage.bat
3.clean all and lock - flash_all_lock.bat
Install number 2
MiFlash2020-3-14-0

Thanks, but all the proposed solutions, I have already tried them without success.

I wonder if anyone else successfully re-locked bootloader... I hope that someone will give their experience!

It's definitely dead. QDLoader 9008.

xire68 said:
It's definitely dead. QDLoader 9008.
Click to expand...
Click to collapse
Are you saying you broke the mobile?
F

EDL methode install rom

jinx11 said:
EDL methode install rom
Click to expand...
Click to collapse
Yes, but I need an autorired account for this...

Not
download program QPST_2.7.496.zip
download prog_emmc_firehose_Sdm660_ddr.mbn
download phone fastboot rom
Download QPST Flash Tool & How to Use it to Flash Firmware on Qualcomm Android Devices
Download all versions of QPST Flash tool and learn how to use the QFIL and Software Download programs to flash firmware files on Qualcomm Android devices.
www.thecustomdroid.com
QPST Tool v2.7.480 - QPST Tool
Download the official QPST Tool v2.7.480 which allows you to flash the stock firmware on your Qualcomm Smartphone and Tablets.
qpsttool.com
illustration video QPST is on youtube