[Recovery][ALPHA][ANDROID-10][22-05-2021] LineageOS Recovery 17.1 for Realme X50 Pro 5G (RMX2076) - Realme X50 Pro ROMs, Kernels, Recoveries, & Other

Introduction
This is a LineageOS Recovery compiled from the source tree of LineageOS 17.1 for Realme X50 Pro 5G. This is part of my ongoing work to port LineageOS 17.1 to this device. Work on the actual LineageOS 17.1 ROM is still under way (but it should be available very soon), while the recovery has been usable for quite some time now. Since it is not possible for TWRP to support any device launched with Android 10 for now, I figured that this might be useful even before I release the LineageOS custom ROM (e.g. people may want to flash Magisk on official ROMs).
Instructions (Installing Recovery)
1. Run `fastboot flash recovery recovery.img`
2. Run `fastboot reboot recovery` to enter LineageOS Recovery
Instructions (Installing Magisk)
You have to use the official Magisk, version 20.4 or later. Installing an older Magisk will make the system unbootable.
1. Download Magisk >= 20.4, put onto computer
2. Reboot to LineageOS recovery, select `Mount /system` (you may see some errors, but they can be safely ignored)
3. Select `Apply update from ADB`
4. Run `adb sideload Magisk-xxx.zip`
5. You will see a signature verification error, select `Yes` to bypass the check
6. Reboot to system to enjoy your Magisk installation.
DOWNLOADS
DOWNLOAD lineageos recovery for X50 Pro 5G
Need few testers to test roms, recoveries etc.

Will it work for realme ui 2.0(Android 11)?? ,I want to flash magisk on realme ui 2.0

ac386 said:
Will it work for realme ui 2.0(Android 11)?? ,I want to flash magisk on realme ui 2.0
Click to expand...
Click to collapse
Read it properly. Its clearly mentioned that its for only RMX2076 and Android-10 only.

Mohzuned said:
Read it properly. Its clearly mentioned that its for only RMX2076 and Android-10 only.
Click to expand...
Click to collapse
Yes but can u tell me is there any way to flash magisk in realme ui 2.0(Android 11) ? There is no firmware file available for my device (RMX2086) ,So I can't even use boot img patch method to flash magisk , I don't want to downgrade to android 10 to flash magisk

ac386 said:
Yes but can u tell me is there any way to flash magisk in realme ui 2.0(Android 11) ? There is no firmware file available for my device (RMX2086) ,So I can't even use boot img patch method to flash magisk , I don't want to downgrade to android 10 to flash magisk
Click to expand...
Click to collapse
First tell me your current firmware version. And there is no benefit to flash magisk in android-11 because it will damage your wifi, mobile connection, bluetooth etc. So I won't recommend you to flash magisk on android-11. If you still want to flash it better to downgrade to Android-10 there is everything fine with magisk.

Finally someone tried to make custom rom for this phone good job

Un
afgboy said:
Finally someone tried to make custom rom for this phone good job
Click to expand...
Click to collapse
UnLuckily i don't own this device. But i have build for testing. Last one booted. Few bugs were present, so latest build need to be tested.

hi bro, do you successfully port lineageos to cn rom?

maczekiel27 said:
hi bro, do you successfully port lineageos to cn rom?
Click to expand...
Click to collapse
Its not port but yes it will work for rmx2071cn also android -10 only

Mohzuned said:
Its not port but yes it will work for rmx2071cn also android -10 only
Click to expand...
Click to collapse
i'm planning to port LineageOs to rmx2072, i have all the files needed,

maczekiel27 said:
i'm planning to port LineageOs to rmx2072, i have all the files needed,
Click to expand...
Click to collapse
I built lineageos Android-10 already. Need to be tested.

Mohzuned said:
I built lineageos Android-10 already. Need to be tested.
Click to expand...
Click to collapse
i have files for android 11, i share it with you, so we can cook TWRP for android 11

maczekiel27 said:
i have files for android 11, i share it with you, so we can cook TWRP for android 11
Click to expand...
Click to collapse
I don't own the device but i have source codes for roms and recovery. Pm me on telegram.
Telegram: Contact @Xtyscissor
www.telegram.me

Mohzuned said:
I built lineageos Android-10 already. Need to be tested.
Click to expand...
Click to collapse
give me the link let me test, my unit is rmx2072 not 2071

Mohzuned said:
I don't own the device but i have source codes for roms and recovery. Pm me on telegram.
Telegram: Contact @Xtyscissor
www.telegram.me
Click to expand...
Click to collapse
i dont have telegram, facebook only or line?

maczekiel27 said:
give me the link let me test, my unit is rmx2072 not 2071
Click to expand...
Click to collapse
It should work for all varient. Pm on telegram

Mohzuned said:
It should work for all varient. Pm on telegram
Click to expand...
Click to collapse
i pm you on telegram

This looks interesting I'm following this thread!

I need something for RMX2071

Jacob_Bentzen said:
I need something for RMX2071
Click to expand...
Click to collapse
???

Related

i need help!!!

Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
You should use treble twrp to install rom
JR Bautista said:
You should use treble twrp to install rom
Click to expand...
Click to collapse
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
update your bootloader to oreo?
JR Bautista said:
update your bootloader to oreo?
Click to expand...
Click to collapse
Yes, 0xC182
MirandaEduardo said:
If I am using a TWRP of treble, however as i say that if installing an AOSP ROM with Android 9 or 8.1 does not pass from the logo and restarts, but if you install the Rom Xperience. 8.1 If run without problems, but the same Rom Xperience. 13 (Android P) does not run, I have tried with the DPI images and do not correrily
Click to expand...
Click to collapse
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
TeamMex said:
do a backup of your files (if you are installing xpe you need a Treble supported TWRP) in xpe 13 maybe you need to do a format data (idk why but some users have a weird bug and only can be fixed if you do a format data
so do a format data from TWRP wipe-->format data-> write yes do a swipe reboot to recovery
copy all your files the rom , install it and enjoy!
if you are installing AOSP you should use twrp from alberto
Click to expand...
Click to collapse
Ok, thanks, friend, I'm going to try it like that
MirandaEduardo said:
Greetings developers, someone of you can help me with the following problem, I can not install the rom AOSP the TWRP does not mark me any problem simply installs but when starting it restarts constantly without going through the restart, like the rom AOEX rom Validus, however I can install the rom Xperience, DotOs, RRemix and the Stock without any problem, you know why that happens, my device is a Moto Z Play XT1635-02.
Click to expand...
Click to collapse
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
khanpatriot said:
Hello brother i think you have a stock rom for xt 1635 02 addison single sim. Bro can you upload it for me or some kind of link? Appreciate your kind help
Click to expand...
Click to collapse
Yes, this Is a link
https://drive.google.com/file/d/1W-DXW1qm0g6GaALjKuA1pvM-_RHqlZ4j/view
Thanks alot
Oooppss one more query does software channel matter? I'm currently running lineage os 14.1 and i can't find the exact software channel of my device I'm little confused is it retus retail or some other channel. Can u plz help?

Working Gsi roms and flashing guide A50DD

Oki guys i want to share whit A50 community,working
SyberiaOs Gsi android 10
Flash tutorial
https://master.dl.sourceforge.net/project/zjrdroid-gsis//GSIs/SyberiaOS-AB-10-20191013-GSI.img.gz
https://mega.nz/#!ZhgXWSxT
Key:
X4IG1jc0v33Pe77280ZR2VRUZ4Xt6aIvP9stXAouWng
Pixel experience 10 android Q
ZJRDroid
Wipe cache,dalvik cache,data,system
Flash Gsi reboot
https://mirrors.lolinet.com/firmware/gsi/Generic/Generic-AB-10-20191007-ErfanGSI.img.7z
Erfan Geneic build Gsi android 10 Q
Wipe data,cache,dalvik cache,system
Flash Gsi reboot
GSI roms.And flashing guide.
First you need TWRP no need to be rooted.
Before starting whit flashing GSI make backup
Android 10 Q Phh built (Flashed whit geiti94 TWRP and multidisabler)
https://github.com/phhusson/treble_.../download/v200.c/system-quack-arm64-ab.img.xz
https://sourceforge.net/projects/op...64-10.0-nano-20190920-UNOFFICIAL.zip/download
Flashing guide
Resize system,reboot recovery and flash gapps
Android 9 Havoc (Flashed whit geiti94 TWRP and multidisabler)
http://bit.ly/2mhhmxf
https://opengapps.org/
Flash guide
Android 9 Pixel Experience (flashed whit Zvox TWRP no multidisabler)
https://github.com/EnesSastim/Downl...19-08-24/PixelExperience_Plus-9.0-arm64_ab.7z
Gapps inside rom
Flash guide:
PE Working only whit Zvox TWRP
Andoid 9 Arrow Os (flashed whit geiti94 TWRP and multidisabler)
https://mega.nz/#!BopFTQIT
Gapps inside rom
Flash guide:
Flash gsi
Go to mount system, advanced, file menager,system,system,bin,delet system-rw.sh
Reboot
Video will upload
Android 9 Blissrom (flashed whit Zvox TWRP no multidisabler)
https://mega.nz/#!F4hABI6T
Flash gsi
Reboot
Video will upload
Special thx
geiti94 for TWRP
Zvox for TWRP
Ianmacd for multidisabler
Good news guys, soon we will be able to flash various Gsi builds:
Miui
OOS
Flame Os
etc
Thx to phhusson and erfanoabdi.New builds from erfanoabdi will support our device (exynos).
I will share whit you for all flushable Gsi build.
Special thx for geiti84 for his TWRP
Zvox for TWRP
Ianmacd for Multidisabler
Are ya gonna make a bugs list for each? Would just be nice to know what is and isn't working. Thanks
RandomAJL said:
Are ya gonna make a bugs list for each? Would just be nice to know what is and isn't working. Thanks
Click to expand...
Click to collapse
Nope i don't have that much time.General problem is FP don't work in all GSI
Video for flashing android 10 updated no need for flashing magisk
Which is the best rom as of now
mmahith18 said:
Which is the best rom as of now
Click to expand...
Click to collapse
Android 10
muhamet said:
Android 10
Click to expand...
Click to collapse
So for me, I had a lot of lag after using video apps such as Netflix or YouTube. Do you know if this issue still persist on the android 10 ROM? I don't care about the fp (it's crap), but face unlock would be nice
Agil1ty said:
So for me, I had a lot of lag after using video apps such as Netflix or YouTube. Do you know if this issue still persist on the android 10 ROM? I don't care about the fp (it's crap), but face unlock would be nice
Click to expand...
Click to collapse
I used 2,3 days daily drive.And i didn't have such problem.
muhamet said:
Android 10
Click to expand...
Click to collapse
is face unlock working??
MateoQ said:
is face unlock working??
Click to expand...
Click to collapse
Didn't try
what about GCAM?
Mega links need decryption key
The links below need a key to download. Does anyone know what the keys are?
muhamet said:
Oki guys i want to share whit A50 community,working GSI roms.And flashing guide.
First you need TWRP no need to be rooted.
Before starting whit flashing GSI make backup
Android 10 Q Phh built (Flashed whit geiti94 TWRP and multidisabler)
https://github.com/phhusson/treble_.../download/v200.c/system-quack-arm64-ab.img.xz
https://sourceforge.net/projects/op...64-10.0-nano-20190920-UNOFFICIAL.zip/download
Flashing guide
Resize system,reboot recovery and flash gapps
Android 9 Havoc (Flashed whit geiti94 TWRP and multidisabler)
http://bit.ly/2mhhmxf
https://opengapps.org/
Flash guide
Android 9 Pixel Experience (flashed whit Zvox TWRP no multidisabler)
https://github.com/EnesSastim/Downl...19-08-24/PixelExperience_Plus-9.0-arm64_ab.7z
Gapps inside rom
Flash guide:
PE Working only whit Zvox TWRP
Andoid 9 Arrow Os (flashed whit geiti94 TWRP and multidisabler)
https://mega.nz/#!BopFTQIT
Gapps inside rom
Flash guide:
Flash gsi
Go to mount system, advanced, file menager,system,system,bin,delet system-rw.sh
Reboot
Video will upload
Android 9 Blissrom (flashed whit Zvox TWRP no multidisabler)
https://mega.nz/#!F4hABI6T
Flash gsi
Reboot
Video will upload
Special thx
geiti94 for TWRP
Zvox for TWRP
Ianmacd for multidisabler
Click to expand...
Click to collapse
demunted said:
The links below need a key to download. Does anyone know what the keys are?
Click to expand...
Click to collapse
I checked the link,only blissrom was with key.I fixed,other links are direct links.If you whant some rom t dawnload and you can't for any reason just pm i will help you my frend
You are most awesome, thank you. Do you know at all if these will work on the A505W? I will try anyways, I am not happy with the Havoc GSI thus far. Magisk won't stick (applies in TWRP successfully but app after boot shows not installed for kernel module). Also, fingerprint not working (though thats the case with all custom ROMs right now) and MTP File sharing is broken.
muhamet said:
I checked the link,only blissrom was with key.I fixed,other links are direct links.If you whant some rom t dawnload and you can't for any reason just pm i will help you my frend
Click to expand...
Click to collapse
demunted said:
You are most awesome, thank you. Do you know at all if these will work on the A505W? I will try anyways, I am not happy with the Havoc GSI thus far. Magisk won't stick (applies in TWRP successfully but app after boot shows not installed for kernel module). Also, fingerprint not working (though thats the case with all custom ROMs right now) and MTP File sharing is broken.
Click to expand...
Click to collapse
For twrp patched whit magisk i don't know,because i didn't flashed.I just waiting to be more stable.For MTP i know that we have wonderful devs like geiti84 and zvox.geiti84 its aware for problem whit MTP and is working t fix that problem.For FP sensor i asked Phhuson and maybe next Android 10 realise this will be fixed.And yes all custom Gsi have FP sensor problem
Can you post the screenshot???
Add new 2 working Gsi Android 10 links
Does Pixel Experience Android 10 works as daily driver?
Dhrubo2000 said:
Does Pixel Experience Android 10 works as daily driver?
Click to expand...
Click to collapse
I've tried it and it works for the most part. Camera, LED Flash, Bluetooth, Rotation, WiFi, Calls, Data, Audio. MTP for some reason does not seem to work. Gestures work but there is no nav bar on bootup. There is network but the signal bar shows empty. Fingerprint sensor does not work. There is a bit of lag when opening apps for the first time but they do ok afterwards. Gonna do some more testing and gather logs and see what I can fix on my own.

TWRP 3.5.1 Supports Android 11

I noticed a few days ago that a new version of TWRP that supports Android 11 is available for a lot of popular phones including the Pixel 3a. I was wondering if anyone has tried installing and using this version of TWRP yet. If you have, did you have any issues installing and using it?
TWRP 3.5.1
Tried it already, and got an error. However I am on A10. This was a mini update before A11 support. Read here.
Can you install android twrp on android 10? and can u install 10 based roms using said twrp?
Denu228 said:
Can you install android twrp on android 10? and can u install 10 based roms using said twrp?
Click to expand...
Click to collapse
No, our official TWRP only supports A9 for now.
MoistPicklez said:
No, our official TWRP only supports A9 for now.
Click to expand...
Click to collapse
Any idea if 3.5.2_9 ( https://dl.twrp.me/sargo/ ) does support Android 11? No instructions about how to install it....
Fentadroid said:
Any idea if 3.5.2_9 ( https://dl.twrp.me/sargo/ ) does support Android 11? No instructions about how to install it....
Click to expand...
Click to collapse
It doesn't work on A11 or A10 yet. These are mini releases before A11 support.
MoistPicklez said:
It doesn't work on A11 or A10 yet. These are mini releases before A11 support.
Click to expand...
Click to collapse
Ok, thank you
Using 3.5.1_9 on LG V20. Any idea why it seems to think that the year is 2067? I thought the flux capacitor in my DeLorean was broken.
is there android 11 support yet?
They would have to figure out the A/B partition thing.
That was the issue a year ago, at least.
blksith0 said:
They would have to figure out the A/B partition thing.
That was the issue a year ago, at least.
Click to expand...
Click to collapse
I really enjoyed using TWRP on older android versions but sadly, I don't think the A/B partition issue will be resolved.
Hey, a working TWRP for A11 on Sargo has been created by @Captain_Throwback on the Sargo/Bonito Telegram group. Should be available soon.
Anghirrim said:
Hey, a working TWRP for A11 on Sargo has been created by @Captain_Throwback on the Sargo/Bonito Telegram group. Should be available soon.
Click to expand...
Click to collapse
Could you share the Telegram group link please?
edit: found it: https://t.me/pixel3a/
benji said:
Could you share the Telegram group link please?
edit: found it: https://t.me/pixel3a/
Click to expand...
Click to collapse
Yep, saw you joining.
Has anyone had any luck with the news 3.6 build of twrp from nov 21?
Download TWRP for sargo
Download TWRP Open Recovery for sargo
dl.twrp.me
sciwhiz said:
Has anyone had any luck with the news 3.6 build of twrp from nov 21?
Download TWRP for sargo
Download TWRP Open Recovery for sargo
dl.twrp.me
Click to expand...
Click to collapse
No, I updated to Android 12 in November before TWRP 3.6 was released.
I was able to boot 3.6.0 with android 12 installed, BUT /data failed decryption, so I'm guessing needs a12 encryption update. I did not try to install it, just fastboot the image.
This is the first time I tried TWRP on the 3a, as I upgraded to a10 immediately after getting the phone two years ago.
Google Pixel 3A is Stuck in Bootloader & OEM is Unlocked while performing software Update.
please help installing TWRP with ADB unauthorized.
Any update on this? I'd like to use TWRP and flash Lineage 18 (Android 11)

[RECOVERY] (3.5.1_10) [hotdog][11]Unofficial TWRP recovery for OnePlus 7T Pro

3.5.1_10 - Hotdog - Unofficial
Releases · Systemad/android_device_oneplus_hotdog
TWRP tree for OnePlus 7T/Pro (Hotdog/hotdogb). Contribute to Systemad/android_device_oneplus_hotdog development by creating an account on GitHub.
github.com
Found on Github. Test it
Same like before but updated twrp with oos11 blobs.
Thanks to the Autor don't wanted to post on xda.
If you use custom Rom you need format data in twrp. Choose the right one because stock is sdcardfs
Will this back up and restore the data partition on a customer ROM?
parag0n1986 said:
Will this back up and restore the data partition on a customer ROM?
Click to expand...
Click to collapse
No on OOS.
gumka77 said:
No on OOS.
Click to expand...
Click to collapse
I am not on oos I am using custom ROM Resurrection remix
Wiping/formating data partition on my 7T is not working, which causes data not readable. For the same reason, restoring data partition is not working. Backup and restore super partitions works properly.
Creator of this TWRP didnt want it on XDA.
If anybody is interested, here is TWRP installer for OnePlus 7T and 7T Pro. Flash with magisk as any other module. https://mega.nz/file/ZlQHDSxL#clPJylZ3zByh8yihP2YfeSv8ndaVxnC6NNSRBL0acDw
EugenStanis said:
If anybody is interested, here is TWRP installer for OnePlus 7T and 7T Pro. Flash with magisk as any other module. https://mega.nz/file/ZlQHDSxL#clPJylZ3zByh8yihP2YfeSv8ndaVxnC6NNSRBL0acDw
Click to expand...
Click to collapse
Magisk can install recoveries?
knpk13 said:
Magisk can install recoveries?
Click to expand...
Click to collapse
Yes
knpk13 said:
Magisk can install recoveries?
Click to expand...
Click to collapse
It can't. It just executes a simple dd command
Does it make any difference from the img version made by the same developer?
Lossyx said:
It can't. It just executes a simple dd command
Click to expand...
Click to collapse
So, if it just execute simple command resulting in recovery flash, doesnt it mean, it can? lol
EugenStanis said:
If anybody is interested, here is TWRP installer for OnePlus 7T and 7T Pro. Flash with magisk as any other module. https://mega.nz/file/ZlQHDSxL#clPJylZ3zByh8yihP2YfeSv8ndaVxnC6NNSRBL0acDw
Click to expand...
Click to collapse
EugenStanis said:
If anybody is interested, here is TWRP installer for OnePlus 7T and 7T Pro. Flash with magisk as any other module. https://mega.nz/file/ZlQHDSxL#clPJylZ3zByh8yihP2YfeSv8ndaVxnC6NNSRBL0acDw
Click to expand...
Click to collapse
What TWRP version does it dd?
parag0n1986 said:
What TWRP version does it dd?
Click to expand...
Click to collapse
Latest one from his github
EugenStanis said:
Latest one from his github
Click to expand...
Click to collapse
I tried it already and it didn't work for me. I'm on Android 10 firmware running resurrection remix. Any idea how to make it work? Is it the sdcardfs or non version? Sorry for all the questions! Be trying to find something other than the Chinese LR closed source BS that actually can backup and restore data partition. Even Chinese TWRP won't flash ROMs for me either....
parag0n1986 said:
I tried it already and it didn't work for me. I'm on Android 10 firmware running resurrection remix. Any idea how to make it work? Is it the sdcardfs or non version? Sorry for all the questions! Be trying to find something other than the Chinese LR closed source BS that actually can backup and restore data partition. Even Chinese TWRP won't flash ROMs for me either....
Click to expand...
Click to collapse
Use an older version, though it's not guaranteed everything will work as work has been shifted to Android 11.
Release 3.5.1_10 - Hotdog - Unofficial · Systemad/android_device_oneplus_hotdog
twrp release: 3.5.1_10 TWRP specific changes: https://gerrit.twrp.me/c/twrpme/+/3568/3/_posts/2021-03-09-twrp-3.5.1-released.markdown Device-specific changes: Switched to using reseprop from TWRP...
github.com
Not sure if this is known by now, but I installed on my OnePlus 7T Pro 5G McLaren just to test and was able to get MTP to work in recovery by disabling MTP then click Mount USB Storage then click unmount and it will enable MTP.
I was able to backup and restore my Super, Data (internal storage included), Boot, and Recovery partitions with this TWRP I am using Resurrection Remix on Android 10. I used the magisk zip that @EugenStanis linked in post #8. Took me a few hours of experimenting to get it done, but now I know how to do it! I was also able to flash HavocOS and Resurrection Remix ROM with this TWRP as well! Finally a TWRP that lets me play around with my phone, and not be afraid to lose all my data!
freemannhp said:
Does it make any difference from the img version made by the same developer?
Click to expand...
Click to collapse
@freemannhp Did you get a TWRP to work for you? What I found, is that it depends on what version of Android the ROM you are using is based off of, and also the ROM itself. What are you using? If you are using OOS, none of them will work on Data decryption. They only work on custom ROMs. I have backed up flashed and successfully restored my entire data partition including the media folder on Resurrection Remix from and now on MSM Xtended XR 6.0

Question C.40 rooted images or link to a full zip?

i've been looking for either of these, and have had no luck. before i lose all hope, does anyone have either handy they'd be willing to share with me?
aNGERY said:
i've been looking for either of these, and have had no luck. before i lose all hope, does anyone have either handy they'd be willing to share with me?
Click to expand...
Click to collapse
You can find them here.
[GUIDE] [Magisk] [Unlock / ROOT / Keep Root] OOS 13.1.0.500
Different variants of Magisk that are available for use : Magisk Variant Stable / Beta / Canary Release Official Android / OOS OOS 11 and above Maintainer topjohnwu Project Link GitHub Zygisk No...
forum.xda-developers.com
I'm not seeing c40 in the list
There is no full .zip for C40, only incr. Someone with C40 would need to pull it from their device with the msm commands that were shared somewhere (though I don't know how to do that, or which thread the commands were in). If I could find the commands I would pull my patched boot.img for you.
Just found this in my search though:
[GUIDE] [Magisk] [Unlock / ROOT / Keep Root] OOS 13.1.0.500
Different variants of Magisk that are available for use : Magisk Variant Stable / Beta / Canary Release Official Android / OOS OOS 11 and above Maintainer topjohnwu Project Link GitHub Zygisk No...
forum.xda-developers.com
terlynn4 said:
Just found this in my search though:
[GUIDE] [Magisk] [Unlock / ROOT / Keep Root] OOS 13.1.0.500
Different variants of Magisk that are available for use : Magisk Variant Stable / Beta / Canary Release Official Android / OOS OOS 11 and above Maintainer topjohnwu Project Link GitHub Zygisk No...
forum.xda-developers.com
Click to expand...
Click to collapse
good find. i still need the vbmeta and vendor_boot though, no?
aNGERY said:
good find. i still need the vbmeta and vendor_boot though, no?
Click to expand...
Click to collapse
You don't need any of that if you patch the boot.img with magisk alpha and install magisk alpha once booted.
Oxygen updater app has the full 4.18G download. Happy modding!
Nathan.7118391 said:
Oxygen updater app has the full 4.18G download. Happy modding!
Click to expand...
Click to collapse
Finally, good to know! Cheers
Nathan.7118391 said:
Oxygen updater app has the full 4.18G download. Happy modding!
Click to expand...
Click to collapse
Awesome! It wasn't there last time I checked, but I see it now!
terlynn4 said:
There is no full .zip for C40, only incr. Someone with C40 would need to pull it from their device with the msm commands that were shared somewhere (though I don't know how to do that, or which thread the commands were in). If I could find the commands I would pull my patched boot.img for you.
Click to expand...
Click to collapse
A full zip came out yesterday on Oxygen Updater, and being pushed to phones without A12
terlynn4 said:
There is no full .zip for C40, only incr. Someone with C40 would need to pull it from their device with the msm commands that were shared somewhere (though I don't know how to do that, or which thread the commands were in). If I could find the commands I would pull my patched boot.img for you.
Click to expand...
Click to collapse
The full zip was released on OU yesterday, and getting pushed out to phones not on A12
Is this update still android 11 or already Android 12?
Can't figure it out.
netgar said:
Is this update still android 11 or already Android 12?
Can't figure it out.
Click to expand...
Click to collapse
C44 is 12

Categories

Resources