Hello everyone,
How do I resolve the message "MDM IS SET. Phone will be reboot 3 sec" and or "MDM MODE. CAN'T DOWNLOD [2] eMMC write fail: SBL1".
I have a device samsung galalxy A6+ (SM-a605GN) in a loop showing the message "MDM IS SET. Phone will be reboot 3 sec", I can't get into recovery mode or hard reset, I can only access download mode. However, I can't install a new rom via odin (stock or custom, I tried several versions of binary and odin), how do I solve or what would be "MDM MODE. CAN'T DOWNLOD [2] eMMC write fail: SBL1" or would it have some other way to fix without odin
You're in the wrong forum buddy.
Related
problem: bootloops, impossible to recovery/install recovery/rom/flash
model: samsung galaxy nexus gt-i9250
bootoloader: locked (unlocked by fastboot just for follow tests)
rom: factory stock original 4.3 JB (JWR66Y)
USB debub: disable (impossible to disable in bootloop)
Developer option: disable (impossible to disable in bootloop)
smartphone boot loop (really it loads android, but reboots randomly after a few second explecially if i try to use it immediately )
in fastboot mode/recovery mode/downloading mode smartphone don' have a bootloop
i tried to reset by different ways:
1) "flash stock + unroot " (soft-bricked/bootloop ) by "nexus root toolkit" , all operation complete correctly but after that , when i restart a phone , it start in the same condition before the reset. i try to use different image (factory image/cyanogenmod /clockworkmod ), same result
2) flash with utility fastboot in fastboot mode and install differente image
3) flash with utility adb in adb mode and install differente image
4) reset with odin utility in downloading mode and install differente image
all operation (erase/sending/write ) complete, but really when start a phone it come back to initial condition.
PS: i try to make any simple operation during system is up and before it have bootloop, but it don't save never, I fear not able to write nothing in all mode
PS2: i try olso to "erase all nand" with odin, and in this condition i recived a "write error" (differt in a normal reset i don't have this error)
it's possible that my NAND is coocked? it's possible to test it in my condition? how to check hardware status? i must change all system board? or all smartphone ?
thanks
Sir,
Please wait until mods will move this thread to the device specific forum for more relevant answers.
Register an account on XDA to have full acces on site.
Stand by
Good luck
Hi guys,
I was trying to find out how to restore my phone because it's dead after receiving and installing the last firmware (Netherland PHN 4.4.2 stock ROM-there was no Custom ROM) by OTA. It was working for few days but after that my phone began restarting and finally it stopped work at all. I wasnt able to turn in on, charge it or simply connect to pc (PC didnt recognized driver - qhsusb_dload) there was no respond so it was completely dead.
I found some solution with debrick image here on forum, but when i putted debrick.img (found some for I9195 android 4.4.2 on web) into sd card via win32diskmanager and inserted it into my phone i was able to get some respond by a phone.
Withou debrick image on sd cart i can't turn my phone on at all but with inserted debrick image i have a chance to turn it on but with some kind of boot loop.
Boot loop:
BOOT RECOVERY MODE (Green row)
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY..
WRITE 139008 sectors.
REBOOT
And it repeats all the time.
With SD Card PC can recognised samsung drivers for my phone but odin can't connect.
I dont know what i did once time but i get another message when odin was able to recognise it
BOOT RECOVERY MODE (Green row)
CHECK BOOT PARTITIONS.
COPY FROM T-FLASH.
BOOT RECOVERY..
WRITE 139008 sectors.
FLASH WRITE FAILURE (Red row)
ddi: mmc_read failed
ODIN MODE (Red row)
PRODUCT NAME: GT-I9195
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x0
CSB-CONFIG-LSB: 0x30
BOOTLOADER RP SWREV: 2
WRITE PROTECTION: Enable
But i'm not able to get into this anymore.
Last status is repetitive first bootloop and i cant get further.
I dont know what to do, to repair my phone or if its completely dead (mean eMMC fail).
Can someone help me with this issue or know some solution
Thanks in advance
Hi
I am trying to install lineageos onto a used samsung galaxy s4 mini I recently bought, but I cannot boot TWRP (yes, I am using the correct recovery-boot button combination,
vol-up + home + power). I've tried searching, but nearly all posts with similar titles have been closed when someone tells OP the recovery-boot button combination, and the
others were various unique problems, as far as I can see.
I used the v3.0.3-0 TWRP from here https://forum.xda-developers.com/showthread.php?t=2678420, extracted the file recovery.tar.md5 and used odin v 3.12.3 to flash it onto the
phone using the "AP" option. Odin displayed no errors, only "PASS" and other success messages. I had switched off auto-reboot, so I rebooted to recovery using vol-up + home + power but I only get the screen:
"Could not do a normal boot. ODIN MODE PRODUCT NAME: GT-I9195I CURRENT BINARY: Custom SYSTEM STATUS: Custom REACTIVATION LOCK(KK): OFF KNOX WARRANTY VOID: 0x0 QUALCOMM
SECUREBOOT: ENABLE (CSB) AP SWREV: S1, T1, H1, A1, P1 SECURE DOWNLOAD: ENABLE"
"Downloading... Do not turn off target!!"
This is not download mode (which I normally reach with vol-down + home + power), but looks very similar aside from the
"Could not do a normal boot." message.
I've tried this several times, trying alternatives Odin 3.10.6 and TWRP v2.6.3.0.
I've not got to any recovery mode for this phone, TWRP or otherwise.
It is not bricked or in a bootloop. If I reboot I can get to android and use the phone.
Can anyone help me install and boot to TWRP please?
I don't know what to try next.
I bought this phone used so I do not know its installation/updates/rooting/flashing history, though it looks pretty vanilla.
Thanks
Crap, I have the exact same issue with TWRP versions higher than 3. Version 2.8.7.0-serranoveltexx does work, but I cannot install lineage (I tried 16 and newer). I simply get "Error executing updated binary in zip '...' and 'Error flashing zip'. And before that, for most versions of linage, it says "the package is for device: serranovelte,serranoveltexx; this device ."
If I tried a lineageversion from another developer, it says that the device is "serranovelte". So yeah, I'm stuck with that unfortunately. Any help would be much appreciated.
Hello dear friends.Here is the problem
I own a N7100 and the mother board was broken.So i got a new one from china.They say it is original and when i check it visually i think that it is original.(i am not sure).It had been working normal by original 4.1 rom.It had cwm recovery.And i wanted to flash a custom rom and it rocommends to use TWRP.So i tried to flash it.But it seemed that i could not install it.It showed CWM when i try to enter recovery mode.After 2-3 attempt it started to stuck on SAMSUNG N7100 screen.Now i neither can enter recovery mode nor to the rom.It loops on samsung screen.The only thing works is download mode.On download mode screen
Product name : GT-N7100
And it says " RPMB: INVALID RPMB DATA"
I can not flash a rom via odin.it always give an error.What can i do to fix it?Is it a hardware problem?can you please explain the ways of fixing it?
Thank you.when i try to flash by heimdall on linux it says
Heimdall v1.4.1
ERROR: Failed to send end session packet!
Releasing device interface...
Hello, i think i have bricked my m30s during procedure of rooting.
i used odin to install twrp recovery.tar.md5, after that the phone start in bootloop and wrote "error recovery" or similar.
then i wrote this: https://forum.xda-developers.com/t/official-recovery-twrp-3-5-0-for-galaxy-m30s.4035019/
and i made: Disable auto reboot in Odin options, Flash vbmeta.tar in AP slot using Odin tool
since this my phone starts with failure: " ! This phone is not running Samsung official software..."
no option of connect, no downloader, nothing.
what can i do now?