Related
Here is unreleased B163 OTA update. (Must be on B156)
https://drive.google.com/file/d/0B79PB4FhWfJAM0hMUWNDanE1ZW8/view?usp=sharing
Note that I haven't found a way to install it yet.
Change log is:
Dear customers, this update improved experience of camera and system performance. involved latest Google patch, Please update your device for improved experience.
Optimized experience of camera.
Improved system performance.
Improved security of system.
Improved system stability.
I have found a way to get all OTA and full updates. Unfortunately, this update only exists in OTA form right now.
I'm hoping someone who has a non-Chinese Mate8 can get in touch with me and I can find all the updates for it as well.
Thank you. How would you install it on the AL10 (stock recovery/unrooted) device?
wow, good work there buddy! looking forward to more OTA leaks from your side
Hiw to install?
please read the first post: "Note that I haven't found a way to install it yet."
Guys full rom (B156) here to hope to pass to B163
https://androidfilehost.com/?fid=24399994186367275
i think this technique can be used if we are able to extract the files into the OTA file.
http://forum.xda-developers.com/showpost.php?p=65113953&postcount=166
CyberMomo said:
i think this technique can be used if we are able to extract the files into the OTA file.
http://forum.xda-developers.com/showpost.php?p=65113953&postcount=166
Click to expand...
Click to collapse
No, mate ota file don't work in this way
If I have enough free time, I will create a way to install whatever OTA you want by reverse-engineering the network protocol. Stay tuned
good stuff, hope we manage on how to update by ota zip .
it seems mate8 is not allow local ota update.
hkfriends said:
good stuff, hope we manage on how to update by ota zip .
it seems mate8 is not allow local ota update.
Click to expand...
Click to collapse
download the ota zip file but it in dload folder and but it in sd card
then power off mate 8
and push volume up+down+power for 10 second
the update will begin
rowihel2012 said:
download the ota zip file but it in dload folder and but it in sd card
then power off mate 8
and push volume up+down+power for 10 second
the update will begin
Click to expand...
Click to collapse
I tried that with B156 and it froze at 5%
ajsmsg78 said:
I tried that with B156 and it froze at 5%
Click to expand...
Click to collapse
I confirm that...putting the zip on internal sd it doesn't give the message "impossible to find the update package" (or similar I don't remember) as you put it in the external...the verification starts, starts also the "updating phase" but it freezes immediately at 5% (in my opinion without modifying anything, cause I was able to reboot normally)....just to be clear, I'm on B156 but I've root and decrypted boot...maybe the success could be obtained starting from a clean b156....maybe rowihel2012 could kindly give us more details on his upgrade success (phone model, starting firmware status,...)
lukemo said:
I confirm that...putting the zip on internal sd it doesn't give the message "impossible to find the update package" (or similar I don't remember) as you put it in the external...the verification starts, starts also the "updating phase" but it freezes immediately at 5% (in my opinion without modifying anything, cause I was able to reboot normally)....just to be clear, I'm on B156 but I've root and decrypted boot...maybe the success could be obtained starting from a clean b156....maybe rowihel2012 could kindly give us more details on his upgrade success (phone model, starting firmware status,...)
Click to expand...
Click to collapse
Non-root stock does not work either to install this. There's an .app file that HiSuite recognizes if you unzip the file that you downloaded... However once loaded and phone restarts it just takes you to a screen where you can wipe or restart. Tried the other way too and get the 5% and then freezes. Something isn't right with the archive. Saw another dload folder on root but can't mess with it since I'm stock. Maybe you could try that directory
acer73 said:
Guys full rom (B156) here to hope to pass to B163
https://androidfilehost.com/?fid=24399994186367275
Click to expand...
Click to collapse
This rom is for NXT-L29 version?
theyre both for AL10 but u can crossflash. also, no one has gotten B163 to work yet
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk
In the root directory there is a folder called dload and inside is a file called update_huawei_dload. Has anyone tried renaming the update to that same name and putting it in that folder?
Has anyone tried to flash this OTA zip file by TWRP ?
I just opened this zip file and found some of scripts which are similar with that's used in TWRP.
I flashed L29 152 update NXT-l29C432B152-FULL-OTA in TWRP on my AL10 after deleting all data. And everything works, so far, apart from themes.
They apply but doesnt do anything. Also it did throw up some error but forgot to take note of it.
I presume b163 will do the same thing,
ajsmsg78 said:
In the root directory there is a folder called dload and inside is a file called update_huawei_dload. Has anyone tried renaming the update to that same name and putting it in that folder?
Click to expand...
Click to collapse
it dosn't work.
The disclaimer is attached to the script file. When you open them, a disclaimer will show up with 2 choices: accept them or exit.
Hi guys
I'm here for give you a batch script (with repo) that works on all windows system without installing .net framework or other software!
The only thing that you need is WinRAR 5.30 or up! Otherwise you will aren't able to unpack all the folder.
I've made this because i see some people that wants to mod his One X, but they can't due to unknown errors with some tools.
This tool will do these functions:
*Bootloader Unlocker/Locker!
*Fastboot Recharger!
*Helps to root your device!
*Recovery Flasher! (New layout and Old layout, no need to download anything!)
*Guides to flash a custom rom!
*boot.img extractor and autoflasher!
*CID/MID Reader!
*Fastboot Emergency Recovery!
*Some accurates guides! (provided by @teemo)
*Integrated FAQ and How To!
*Fastboot&ADB status Connection Verifer!
*And much much more! Stay tuned!
Special contributors:
@teemo for providing all stuff needed like recoveries, guides and others.
Downloads and repo:
MEGA LINKS:
V1.0 Stable: https://mega.nz/#!NddVkTTb!aINZPwACwHgAYgpA4L8tR86dobJ9zGuGpY-5In3YE7E
Beta3: https://mega.nz/#!AFkEFJIL!jI3EJtJhbdiT_Q8I7tb3qnDINNj3os8CYNtB_htHGvA
Beta2: https://mega.nz/#!MUlSgZwI!SPaAKOkgt-xCHyzMwb6rJmzW0mQY66N8L87S5JbgZVs
Beta1: https://mega.nz/#!tRMDHDAZ!Cv09ijHB5WJrp5zNL4gzUyz3cv_1qy1X06Lx_e_t65k
Google Drive Links:
V1.0 Stable: https://drive.google.com/file/d/0BzLuAF-eWwH9VnIzNkxEbldsTjQ/view?usp=drivesdk
GitHub Repo: https://github.com/Giovix92/onex-modder.git
Tested OS:
*Windows 98 (Yeah, on VM )
*Windows XP (All SPs)
*Windows Vista (All SPs)
*Windows 7 (All SPs)
*Windows 8
*Windows 10
Download it and test if all works! If there is any bug, tell me! If anyone goes wrong, i'm happy to help you!
Please don't modify the batch code, or you can harm your device/pc.
Changelog:
V1.0 Stable: Added 5 more function. Check the new features pressing 11 on the menù!
V1.0b3: Added 7 more functions. Now there is 11 items + 2 hide on the menú. Check the new features pressing 11 on the menú!
V1.0b2: Added 2 new functions: Fastboot & Adb status connection verifer and Fastboot phone recharger
V1.0b1: Initial Release
Enjoy! )
How to use:
You don't need to setup anything.
You don't need .NET Framework. Simply install WinRAR 5.30 or up, download my rar package, decompress it and open the batch file. Make sure you have this tree:
|OneX_Modder (Folder)
|---OneX_Modder.bat
|---Resources
At first screen there is the disclaimer. After the disclaimer, there are some options:
If you want to unlock your bootloader, press 1. It will guides on how to. It includes an Unlock_code.bin auto flasher. )
If you want to flash a custom recovery, press 2. It will flash a custom recovery in the menú. Simply select a recovery, type Y (yes) and wait for the flashing. It's very easy. No more annoying manual-flashing
If you want to root your device, press 3. There is an explained how to.
If you want to flash a custom rom, press 4. There is an boot.img extractor and flasher and a guide provided by @teemo (thanks).
If you want to verify if the pc recognize the device, press 5, and the tool will show you the adb&fastboot status.
If you are desperatly in need to flash a rom but you haven't enough power, no more worries!! Reboot your phone in fastboot mode, connect to the pc, press 7 and your phone will be recharged!
If you want to read the about, press 9.
If you want to flash a new RUU, but you have the Bootloader unlocked and you need to flash a new RUU, press 8 and your bl will be relocked!
If you want to see the lasts changes, press 11.
If you want to flash a custom rom, but your hboot is older, press 0 and you will be guided. You need only to follow the first steps. The final process is automated!
FAQ:
Q: I have a problem with this tool! How can i do?
A: Don't worry! I will help you in any situation!
Q: Why some numbers aren't show?
A: They aren't shown because i'm working on their sections. I will add in new betas
Q: Really i need WinRAR? Why?
A: Yes, because the .rar archive is a RAR5 archive. Only WinRAR can open them.
Q: I really love it! How can i support you?
A: Simply press thanks button!
Q: How can i contact you if i have a problem with this tool?
A: Only this thread, because if a user has the same problem than you, he will find easily the solution without making a new post.
Added beta2! It has new functions: please check changelog (op post)
Thank you. Please place instructions of use/setup in op
nchc said:
Thank you. Please place instructions of use/setup in op
Click to expand...
Click to collapse
Yes, sure! There's no setup. I will add in 2nd post. Thanks for the tip.
Added an How to and FAQ. Enjoy! The beta3 is already ready for uploading! I will upload it the next week.
Guys, tell me your favourite colours for this little batch script and i will create 3 modded version with different colours! The beta3 will be published the next week due to much much work on it. It will has: HBOOT Upgrader, an how to and more more functions! The size is decreased of 30%. Sorry for this little problem
Some trouble.
Hello and thank you for your effort! I tried to flash twrp2853-endeavoru-NewLayout over the old one but while in recovery, the phone stays stuck at twrp hox welcome screen. Any idea of how can I pass this and access the twrp menu?
b12rtc said:
Hello and thank you for your effort! I tried to flash twrp2853-endeavoru-NewLayout over the old one but while in recovery, the phone stays stuck at twrp hox welcome screen. Any idea of how can I pass this and access the twrp menu?
Click to expand...
Click to collapse
Hmmm. Isn't passing at all TWRP welcome screen? The phone can boot up in fastboot? If yes, Try this: go on Resources-ADB_TOOLS. Right click on ADB_TOOLS and select command prompt. Then reboot your phone in bootloader mode and type: fastboot erase cache , press enter, type fastboot reboot bootloader or fastboot reboot-bootloader and try to access in recovery.
P.s. tomorrow i will publish beta3 with HBOOT Upgrader and much much more!
Giovix92 said:
Hmmm. Isn't passing at all TWRP welcome screen? The phone can boot up in fastboot? If yes, Try this: go on Resources-ADB_TOOLS. Right click on ADB_TOOLS and select command prompt. Then reboot your phone in bootloader mode and type: fastboot erase cache , press enter, type fastboot reboot bootloader or fastboot reboot-bootloader and try to access in recovery.
P.s. tomorrow i will publish beta3 with HBOOT Upgrader and much much more!
Click to expand...
Click to collapse
Thanks for reply! I've just tried what you suggested but in recovery I still can't pass the twrp ''hox teamwin big'' screen. If I put the old layout back everything is fine again but can't flash any newer rom.
I must tell you though, that I've tried to install it before using different ways but I had the same result There's no way to pass the twrp new layout's start scxreen. So I guess there's something wrong on my side... (I had cwmr before, it may be that?). If you have any other suggestion i'll be happy to try, If not I'll try to dig more.
Once again, thank you for your work and support.
b12rtc said:
Thanks for reply! I've just tried what you suggested but in recovery I still can't pass the twrp ''hox teamwin big'' screen. If I put the old layout back everything is fine again but can't flash any newer rom.
I must tell you though, that I've tried to install it before using different ways but I had the same result There's no way to pass the twrp new layout's start scxreen. So I guess there's something wrong on my side... (I had cwmr before, it may be that?). If you have any other suggestion i'll be happy to try, If not I'll try to dig more.
Once again, thank you for your work and support.
Click to expand...
Click to collapse
Hmmm... Probably the zip is damaged. The TWRP is flashed successfully or there are errors? No, the cwm doesn't make any problem. I will try to view if there is a problem on the code. Thanks for your test
Giovix92 said:
Hmmm... Probably the zip is damaged. The TWRP is flashed successfully or there are errors? No, the cwm doesn't make any problem. I will try to view if there is a problem on the code. Thanks for your test
Click to expand...
Click to collapse
I don't know for sure, but I rather think your zip file is ok. The flashing was ok, no errors. It's probably my phone. Of course, a double check on the code doesn't hurt, it just might be loosing time for nothing. Of course, if you will come back with something new tomorrow I will try my luck again
b12rtc said:
I don't know for sure, but I rather think your zip file is ok. The flashing was ok, no errors. It's probably my phone. Of course, a double check on the code doesn't hurt, it just might be loosing time for nothing. Of course, if you will come back with something new tomorrow I will try my luck again
Click to expand...
Click to collapse
I will check the code asap. In 10 minutes i will update you... No, if it's your phone other recoveries doesn't boot at all. Anyway, i will check. Retry and update me. Good luck!
Edit: I've checked all the code, of all recoveries.Now i will add stock HTC Recovery (if anyone wants the stock recovery). Anyway... I will add another TWRP with New Layout Support.
Edit2: Check the beta3!
Beta3 is out! Check the new version! It has 7 more functions. You can find them in OP post at Downloads section!
b12rtc said:
I don't know for sure, but I rather think your zip file is ok. The flashing was ok, no errors. It's probably my phone. Of course, a double check on the code doesn't hurt, it just might be loosing time for nothing. Of course, if you will come back with something new tomorrow I will try my luck again
Click to expand...
Click to collapse
Man, type fastboot getvar all into your cmd, and post here the result.
Guys, tell me any idea for the first stable. If you want any function on this script, tell me and i add them! (S-OFF is possible only on HTC One X+ and AT&T HTC One X)
Giovix92 said:
Guys, tell me any idea for the first stable. If you want any function on this script, tell me and i add them! (S-OFF is possible only on HTC One X+ and AT&T HTC One X)
Click to expand...
Click to collapse
Any chance of incorporating the ability to get Kali Nethunter on our One X(https://cyberkryption.wordpress.com/2014/10/13/the-quest-for-kali-nethunter-part1/)
pleomaxell said:
Any chance of incorporating the ability to get Kali Nethunter on our One X(https://cyberkryption.wordpress.com/2014/10/13/the-quest-for-kali-nethunter-part1/)
Click to expand...
Click to collapse
Hmmm... I've read all the steps... But i don't know kali nethunter. I know only Kali for pc. If you explain me because you want it i will add them in a separate batch that will be called by the main program. The main step is to build the cm... the 2nd is more difficult... The 3rd too... Please explain me. Thanks in advance.
Giovix92 said:
Hmmm... I've read all the steps... But i don't know kali nethunter. I know only Kali for pc. If you explain me because you want it i will add them in a separate batch that will be called by the main program. The main step is to build the cm... the 2nd is more difficult... The 3rd too... Please explain me. Thanks in advance.
Click to expand...
Click to collapse
I don't know how to explain it to you because I am not a programmer. I tried to follow that guide but got scared because it looked a bit complex.
pleomaxell said:
I don't know how to explain it to you because I am not a programmer. I tried to follow that guide but got scared because it looked a bit complex.
Click to expand...
Click to collapse
Okay, so... The process for me is a bit complicated because now i'm a win user, and not a linux user due to my bad pc (only 1gig of ram, single core 1.66GHz), but i can create an .sh script that can do this process automatically. Maybe if this work i will create some .sh script to build some custom rom . I need only to write the code that is in the guide (maybe with 2-3 sec of delay too and some echo) and optimizing them with some request. Anyway, stay tuned!
hey community
I've tested CAN-L11C432B320 a while and miss the equalizer-app, also have an extreme powersaving device (...) but if i'm running runtastic they will turn off gps after 30 seconds display-off-time, background-services like whatsapp, pushbullet, etc.. will close after a few hours "inactivity", bad fingerprint-performace, some xposed-plugins have massive battery-drain and wont work....
so on.. i still search a while if its possible to get my stock emui 4.1 back...
...and yesterday i found this post:
h**p://w*w.htcmania.com/showthread.php?p=24388723
it looks like there was a full CAN-L11C432B100 and CAN-L01C432B100 firmware but i could not install them
i put the update.app in SDCARD:\dload and tried to install them with original EMUI5-recovery and the extracted EMUI4.1-recovery - everytime it hangs up at 5% and reboots after ~5 minutes.
i'm clueless.. maybe someone will also downgrade and found a solution how to get them work...
sorry from my bad english and the link-modification but i'm new here
I think we need to flash first the EMUI 4.1 recovery.img
Houamei said:
I think we need to flash first the EMUI 4.1 recovery.img
Click to expand...
Click to collapse
i've flash erecovery.img and recovery.img extracted from the update.app --> reboots too on 5%
extracted 4.1 Recovery: mega.nz/#!1MdXmART!Bbd3COTNnCsOB4iVMwQ0vOQhdEvzWDaWVnRhMwFMg08
xCite86 said:
hey community
I've tested CAN-L11C432B320 a while and miss the equalizer-app, also have an extreme powersaving device (...) but if i'm running runtastic they will turn off gps after 30 seconds display-off-time, background-services like whatsapp, pushbullet, etc.. will close after a few hours "inactivity", bad fingerprint-performace, some xposed-plugins have massive battery-drain and wont work....
so on.. i still search a while if its possible to get my stock emui 4.1 back...
...and yesterday i found this post:
h**p://w*w.htcmania.com/showthread.php?p=24388723
it looks like there was a full CAN-L11C432B100 and CAN-L01C432B100 firmware but i could not install them
i put the update.app in SDCARD:\dload and tried to install them with original EMUI5-recovery and the extracted EMUI4.1-recovery - everytime it hangs up at 5% and reboots after ~5 minutes.
i'm clueless.. maybe someone will also downgrade and found a solution how to get them work...
sorry from my bad english and the link-modification but i'm new here
Click to expand...
Click to collapse
There is a link for a rollback update, but i'm not home. When I get there, I send it. About battery, try to use greenify to help it to last long.
You can't just try to use a full package because of versioning scheme they use.
Here http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v72696/f1/full/update.zip
Same problem here, still drops at 5% even with the new file
I just wana know the best way to revert to stock
---------- Post added at 07:32 PM ---------- Previous post was at 07:28 PM ----------
and sorry I don't have an SD Card
Vinnom said:
Here http://update.hicloud.com:8180/TDS/data/files/p3/s15/G79/g0/v72696/f1/full/update.zip
Click to expand...
Click to collapse
thanks for the file but it won't work for me too..
the install process stops at 5% "Installing update" and reboots after a few minutes
can we extract all from the ota update zip and install via flash? can this work?
xCite86 said:
thanks for the file but it won't work for me too..
the install process stops at 5% "Installing update" and reboots after a few minutes
Click to expand...
Click to collapse
Hmmm, sorry, I thought it would help. In fact, the package is listed as a rollback to M, but it is for CAN-L11. The rollback for CAN-L01, I didn't find. As there isn't many differences between those models, I thought it would work
EDIT: now that I read the op again, I noticed that your model is CAN-L11. I wonder why it didn't work
Houamei said:
can we extract all from the ota update zip and install via flash? can this work?
Click to expand...
Click to collapse
No, it won't.
The reason behind this is because system partition get smaller (because nougat way of update) after updating it to emui 5. So the old system.img won't fit the new partition
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Mikey94 said:
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Click to expand...
Click to collapse
So you downgraded?
Mikey94 said:
My phone only hangs up at 5% when the usb cable is connected. When i open the download mode without connected usb cable, it works.
Click to expand...
Click to collapse
did you downgrade your nougat successfully with the files above??
edit: i tried it without a connected usb cable and got "software install failed!" after short time
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
i think this should work if you or someone else share a backup i could try..
Michiel0912 said:
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
Click to expand...
Click to collapse
no, in my opinion the nougat bootloader want work with mm.
I would flash the firmeware of mm and after that flash twrp and restore the backup after that [emoji106]
It will work. There is a backup within twrp thread, from bluesmothie.
Vinnom said:
It will work. There is a backup within twrp thread, from bluesmothie.
Click to expand...
Click to collapse
found it...
https://forum.xda-developers.com/showpost.php?p=70259615&postcount=2
re-unlocked bootloader
flashed twrp with fastboot flash recovery twrp_huawei_generic_a53_YYYYMMDD.img
copied all the dropbox files to /external_sd/TWRP/BACKUPS/FPFDU16930014596/1970-03-18--16-40-58_CANC432B100/...
wipe all partitions except sd-card
recover the complete backup
so @Vinnom many thanks for your help. i got my phone back to life (after fomatted data partition) and got downgraded to CANC432B100 now.
Michiel0912 said:
Is a restore of a CAN-L11 backup from Android 6 in TWRP not possible?
Click to expand...
Click to collapse
Yeah, thanks Vinnom...
xCite86 said:
found it...
https://forum.xda-developers.com/showpost.php?p=70259615&postcount=2
re-unlocked bootloader
flashed twrp with fastboot flash recovery twrp_huawei_generic_a53_YYYYMMDD.img
copied all the dropbox files to /external_sd/TWRP/BACKUPS/FPFDU16930014596/1970-03-18--16-40-58_CANC432B100/...
wipe all partitions except sd-card
recover the complete backup
so @Vinnom many thanks for your help. i got my phone back to life (after fomatted data partition) and got downgraded to CANC432B100 now.
Click to expand...
Click to collapse
Did the same thing, but first TWRP didn't find the backup. So i did a small backup just of the boot partition, so that TWRP makes a new backupfolder "FPF4C16A07000014"". Now i renamed the " FPFDU16930014596" to the new "FPF4C16A07000014" and TWRP found the backup and i was able to restore :highfive::highfive:
Small Addition:
It was a freaking fight to get my bootloader unlocked again, cause i lost the unlock code.
The websites (english and asian) are freaking BS. Was not able to get to the page where you get the code, so i downloaded DC-Tool and payed 4 dollars for the damn code.
Now the code is saved in my owncloud, dropbox, google drive, on a sheet of paper and google notes. No way to lose it again
B100 firmware is much smoother than B320 but has a lack of comfort, like i'm missing the new quick settings with double pull down and the touch responsibility of slide bars (like the volume bars) is not very good in B100... But i won't upgrade to 320 again, because of the following points that make it a no go for daily driver:
- Camera is very slow and hangs up
- Video playback is very slow and buggy (no matter if it's in the galery or youtube, ect.)
- Fingerprint is too slow
- Whole system gets very slw if you dont clean up the app history
Will upgrade again when there is a new version out
please am having same issue here. tried restore but still not booting.
problem is cust. what do i do about it.
HELP ME
Hello,
hopefully you can help me with my seemingly bricked Honor Pro 8 because of root and stock rom update procedures. I bought the phone with amazon and the package seemes to give me the information to have an EU-version of the phone.
The fastboot get-oem-information code or so also puts out the status of an European bootloader.
Regarding my working steps first of all the phone took the new update. Then I was successful in unlocking the bootloader, installing TWRP and rooting it by supersu.
But after that I was curious about the "Magisk" rooting abilities. Therefore I tried a superuser-unroot via script finding inside this forum following by flashing a extracted boot.img of an update.app file of a DUK-L09C432B130 update. After ending in a bootloop by trying the 1.30 beta version of magisk I was able to boot the normal android desktop after I uninstalled the beta version and having flashed the normal 1.20 version.
But then I tried to install 2 certain modules inside of magisk. In consequence the problem was to see the rebooted android not to load any icons. In the other side it put up the message of not having enough mobile disk memory after some minutes which couldn't be true in fact. So I tried a factory reset inside TWRP and also a full wipe. Disappointingly I haven't been successful in rebooting android once more.
Therefore I unseccessfully tried to flash the Full-OTA-MF stock rom of DUK-L09C432B130 in two versions and the L09-C432b120a via the EMUI-install mode by pressing vol+ and - and power buttons. To do that I prepared a SD card as a exfat format. But I just received the message of "software install failed" when reaching 5 %.
So I got to the frustrating point not to know what stock rom I can flash in another try or doing anything else. I would be very glad if U could help me in this desperating situation. :fingers-crossed:
Thanks and best regards.
Can you boot to erecovery?
adriansticoid said:
Can you boot to erecovery?
Click to expand...
Click to collapse
I can but it just puts out the message "Getting package info failed"
Filo83 said:
I can but it just puts out the message "Getting package info failed"
Click to expand...
Click to collapse
Please try another version of firmware.
adriansticoid said:
Please try another version of firmware.
Click to expand...
Click to collapse
That is my problem not to know which version to use because three dowloaded EU-versions weren't successful to install. It resulted in an error at 5 % of the 3-buttons-install mechanism.
Filo83 said:
Hello,
hopefully you can help me with my seemingly bricked Honor Pro 8 because of root and stock rom update procedures. I bought the phone with amazon and the package seemes to give me the information to have an EU-version of the phone.
The fastboot get-oem-information code or so also puts out the status of an European bootloader.
Regarding my working steps first of all the phone took the new update. Then I was successful in unlocking the bootloader, installing TWRP and rooting it by supersu.
But after that I was curious about the "Magisk" rooting abilities. Therefore I tried a superuser-unroot via script finding inside this forum following by flashing a extracted boot.img of an update.app file of a DUK-L09C432B130 update. After ending in a bootloop by trying the 1.30 beta version of magisk I was able to boot the normal android desktop after I uninstalled the beta version and having flashed the normal 1.20 version.
But then I tried to install 2 certain modules inside of magisk. In consequence the problem was to see the rebooted android not to load any icons. In the other side it put up the message of not having enough mobile disk memory after some minutes which couldn't be true in fact. So I tried a factory reset inside TWRP and also a full wipe. Disappointingly I haven't been successful in rebooting android once more.
Therefore I unseccessfully tried to flash the Full-OTA-MF stock rom of DUK-L09C432B130 in two versions and the L09-C432b120a via the EMUI-install mode by pressing vol+ and - and power buttons. To do that I prepared a SD card as a exfat format. But I just received the message of "software install failed" when reaching 5 %.
So I got to the frustrating point not to know what stock rom I can flash in another try or doing anything else. I would be very glad if U could help me in this desperating situation. :fingers-crossed:
Thanks and best regards.
Click to expand...
Click to collapse
you download the nocheck recoveries from my rebranding guide, download the corresponding firmware by morph (important!), flash both recovery images just like stated in the guide, boot into recovery mode like you would do to boot into twrp, do a factory reset, reboot and insert the microsd with the dload folder from extracted downloaded firmware and boot into force dload mode (vol+ and vol- and power) - the installation should start now and reset everything back to full stock.
Regards
Thank you very much OldDroid. You're my hero. It worked fine.
But to install the new 130-update the phone starts inside TWRP and ends with an "error 9" and the words "block image verify", "asserts failed". Could it be possible to perform the update by starting the forced update process by pressing the three hardware buttons on booting? And is it possible not to wipe the data and losing root by using a update?
Viele Grüße aus Berlin nach Berlin
Filo83 said:
Thank you very much OldDroid. You're my hero. It worked fine.
But to install the new 130-update the phone starts inside TWRP and ends with an "error 9" and the words "block image verify", "asserts failed". Could it be possible to perform the update by starting the forced update process by pressing the three hardware buttons on booting? And is it possible not to wipe the data and losing root by using a update?
Viele Grüße aus Berlin nach Berlin
Click to expand...
Click to collapse
OTA packages cannot be installed via twrp at the moment
you should use stock recovery for that!
Best regards
Grüße zurrück aus Berlin nach Berlin
Could you explain me a bit more please? Is it the standard system update ins the systems menu, here it wants to load the 2,9 GB file. Updating this way with the "no check recovery" resulted in an checking error at about 12 %.
Or could it be via recovery shortly after starting the phone? But there are no choices to choice. It just automaticely begins installing something stopping at 5 %.
Hope you can help one more please.
Filo83 said:
Could you explain me a bit more please? Is it the standard system update ins the systems menu, here it wants to load the 2,9 GB file. Updating this way with the "no check recovery" resulted in an checking error at about 12 %.
Or could it be via recovery shortly after starting the phone? But there are no choices to choice. It just automaticely begins installing something stopping at 5 %.
Hope you can help one more please.
Click to expand...
Click to collapse
soooo, if you flashed one of @-=MoRpH=- 's firmwares, your device is back to stock and the recoveries have been overwritten again! I don't recommend flashing OTA updates or other things through the NoCheck version as it is only intended for worst-case cenarios.
But could you tell me the single steps to update from Morph's DUK-L09C432B120 version to the newest version DUK-L09C432B130?
I only got errors to update the firmware DUK-L09C432B130 from the stock rom thread in this forum and the russian website mentioned there.
Filo83 said:
But could you tell me the single steps to update from Morph's DUK-L09C432B120 version to the newest version DUK-L09C432B130?
I only got errors to update the firmware DUK-L09C432B130 from the stock rom thread in this forum and the russian website mentioned there.
Click to expand...
Click to collapse
extract the firmware and flash manualy using fastboot
thilak devraj said:
extract the firmware and flash manualy using fastboot
Click to expand...
Click to collapse
That is just needed to be done as last resort. Better stick with dload.
adriansticoid said:
That is just needed to be done as last resort. Better stick with dload.
Click to expand...
Click to collapse
he said he got some errors doing dload, so this method works too
thilak devraj said:
he said he got some errors doing dload, so this method works too
Click to expand...
Click to collapse
He must find the right firmware first.
adriansticoid said:
He must find the right firmware first.
Click to expand...
Click to collapse
finding a firmware for huawei devices is a pain in the ass, you know
thilak devraj said:
finding a firmware for huawei devices is a pain in the ass, you know
Click to expand...
Click to collapse
That's why we have Firmware Finder.
adriansticoid said:
That's why we have Firmware Finder.
Click to expand...
Click to collapse
even in firmware finder, it will be difficult sometimes for sone devices
thilak devraj said:
even in firmware finder, it will be difficult sometimes for sone devices
Click to expand...
Click to collapse
Maybe. But they are constantly improving.
adriansticoid said:
Maybe. But they are constantly improving.
Click to expand...
Click to collapse
i appreciate the firmware finder, but sometimes, its just inappropriate
Hi there,
I've combined some custom-kernel-like tweaks into a single flashable .tar file and I wanted to share it with you.
This .tar file contains:
-patched vbmeta image
-working magisk root with full Android 11 support
-magisk manager helper preinstalled
-a cleaned up boot screen + no bullsh*t on boot screen
-a cleaned up unlocked bootloader screen + no bullsh*t on unlocked bootloader screen
Prerequisites
-an unlocked bootloader
-firmware version CTL1 (A11)/BTJ3 (A10) or newer
-Odin 3.XX.X
-all data backed up
-fully functional brain
-stock recovery and firmware (this will not work if you have a custom recovery or run a custom rom)
STOCK BASED ROMS LIKE BEYONDROM WILL ALSO NOT WORK!
PLEASE NOTE:
-I am not responsible for a bricked device, please make backups and make sure to
always have the official firmware if something goes wrong
-flashing this requires you to factory reset your phone or else the phone won't boot
Instructions:
-unlock your phone's bootloader
-boot into download mode
-in Odin uncheck auto-reboot
-put the .tar file into the AP slot (If it doesn't work try USERDATA)
-after flashing boot into recovery with the key combination
-select factory reset and confirm (This will wipe everything from your phone)
-after factory reset reboot into system
-setup the phone and restore your backup (if you made one)
-Install Magisk and you're good!
If you have any problems
Please don't just comment "Doesn't work" and instead tell me about
the errors you encountered, your software info and other information
you think would be helpful.
Happy flashing!
If you still have questions make sure to ask them below
DOWNLOAD CTL1+: https://1drv.ms/u/s!AtNTTTF5vqOe73aVGDPSRGr5aria?e=dICFlS
DOWNLOAD BTJ3+: https://drive.google.com/file/d/1KqOGRbAy4fY1ghro4HoP-eDDYh4G7b5Z/view?usp=sharing
Tried it on my friend's phone,works great.Thanks
Can i flash it as my firmware version starts with QP1A.??(build number)..
Thanks in advance and cheers..
@[email protected] said:
Can i flash it as my firmware version starts with QP1A.??(build number)..
Thanks in advance and cheers..
Click to expand...
Click to collapse
This doesn't say anything. Can you tell me what custom ROM you are running? If you are on rooted stock also tell me.
Hi,yes,phone is rootedAndroid 10,,one Ui,v 2.1,build number QP1A 190711.020.G988BXXU1ATCT..
@[email protected] said:
Hi,yes,phone is rootedAndroid 10,,one Ui,v 2.1,build number QP1A 190711.020.G988BXXU1ATCT..
Click to expand...
Click to collapse
Geeeeeez! Update your phone! You have to have OneUI 2.5 BTJ3 or OneUI 3.0 CTL1 at least. What are you doing on 2.1? If you don't update, this will break your phone.
Okay buddy,ty..will do that.
Hi again m8,can i update Android 11,,One GUi 3.0,RP1A200720.012 G988B...
And ,or which file i have to use??
@[email protected] said:
And ,or which file i have to use??
Click to expand...
Click to collapse
Depends on the version. I don't want to be rude but how did you even manage to root your phone with this lack of knowledge?
If you update to Android 11/One UI 3.0 you chose the One UI 3.0 one. If you only update to 2.5 you chose 2.5. Remember to check the end of your firmware number:
There are supported firmware endings:
One UI 2.5:
-BTJ3
-BTJ4
One UI 3.0:
-CTL1
-CTL6
-Any One UI 3.0 firmware above that.
Download SM-G988B / Galaxy S20 Ultra 5G SM-G988B in Samfw - Samsung firmware download
Pick your CSC there, chose the newest one preferably (A11), press "Download on website", unzip it and flash it with Odin while in download mode. You should know how to do that.
After it's finished, complete setup (do not restore any backups yet!) and go into download mode again. Flash the file as AP or USERDATA (whatever works) and perform another factory reset. Done.
So i just reflashed stock because Beyond rom is givving me issues, says you removed all the BS from the boot screens but i still have that unlocked bootloader msg. i flashed in AP with no issues, that msg mean it didnt work?
BCityModz said:
So i just reflashed stock because Beyond rom is givving me issues, says you removed all the BS from the boot screens but i still have that unlocked bootloader msg. i flashed in AP with no issues, that msg mean it didnt work?
Click to expand...
Click to collapse
The unlackiert bootlaoder Massage Stars Tiere just wichtig Themen Bulletin
Edit: German Autocorrection sorry wait haha
JanBoyGamer23 said:
The unlackiert bootlaoder Massage Stars Tiere just wichtig Themen Bulletin
Edit: German Autocorrection sorry wait haha
Click to expand...
Click to collapse
Ok disabled the autocorrection. What I was trying to say is: The unlocked bootloader message is still there just without the bull**** about your phone being vulnerable to hackers and this other ****. It now just says that it is unlocked.
JanBoyGamer23 said:
Ok disabled the autocorrection. What I was trying to say is: The unlocked bootloader message is still there just without the bull**** about your phone being vulnerable to hackers and this other ****. It now just says that it is unlocked.
Click to expand...
Click to collapse
Ok sweet, so Im no pro at any of this but i know the basics to flash. and wasnt able to unlock my last phone because the unlock option never popped up in settings. but now my camera isnt working, i open it up and its just black, no errors or anything.
BCityModz said:
Ok sweet, so Im no pro at any of this but i know the basics to flash. and wasnt able to unlock my last phone because the unlock option never popped up in settings. but now my camera isnt working, i open it up and its just black, no errors or anything.
Click to expand...
Click to collapse
That can't be an issue with the script as it doesn't modify anything related to the camera
JanBoyGamer23 said:
That can't be an issue with the script as it doesn't modify anything related to the camera
Click to expand...
Click to collapse
Ok I may have to make a copy of my girls phone and flash original back to the phone and go again.
JanBoyGamer23 said:
That can't be an issue with the script as it doesn't modify anything related to the camera
Click to expand...
Click to collapse
yea IDK, did it all over again, even booting up to make sure the cam was working. same thing black screen when i open the camera app.
ok, i tried searching to see if this trips knox...so i am gonna ask at the risk of appearing stupid...
Does it trip knox??
frostmore said:
ok, i tried searching to see if this trips knox...so i am gonna ask at the risk of appearing stupid...
Does it trip knox??
Click to expand...
Click to collapse
Short answer: Yes
Long answer: You are unlocking your bootloader and flashing a custom image so you lose your warranty and trip knox
frostmore said:
ok, i tried searching to see if this trips knox...so i am gonna ask at the risk of appearing stupid...
Does it trip knox??
Click to expand...
Click to collapse
If you want to use s health: Download build.prop editor, grant it root access and and change the value of 'ro.config.tima' from 1 to 0