Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Click here to get to the new post where we'll keep updating this rom
What it is
It is an LineageOS 14.1 alpha build from official LineageOS sources devices trees and fresh caf 3.4 kernel port. This is not related anymore (2017-03-22) to the Sony Open Device Project (sonyxperiadev). They work on a different way and we are helping each others as often as possible.
This rom is worked to be as stable as possible to be used as a daily driver. There are no changes into LineageOS sources, manifest to build is attached in this post. The idea is to share this built with the community to improve this rom. If it is good enough, maybe, someday, get official again for our D6603. Thanks a lot to @tomascus who made this possible. (his donate link)
Disclaimer
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Who can use it
It is only for Z3 and UNLOCKED UPGRADED BOOTLOADERS
How to install
%= Only needed at first flash
% Update ROM to .291 with emma (or Flashtools)
% When install is done go into fastboot mode (plug usb + vol down key = blue led)
% Flash this TWRP (version 3.1.x) | If you are a Z3 Dual user, flash zip below before installing Z3 Dual version. / If you already are in .291 and have a working TWRP (modded rom/kernel/adv kernel) you can use the flashable zips below instead.
Shutdown the device
Unplug the usb cable
Maintain volume down & power until you see twrp splash screen
% Wipe system, cache and data
Install rom zip (+ % gapps if you need it)
Reboot
Rolling back to stock
Flash stock rom with emma or flashtool
If you flash with flashtool remember to check wipe apps_log and userdata partitions to get a clean install
What gapps to flash?
Use f-droid
You can flash any gapps you want, our partition is 2GB and rom is 700MB:
Code:
z3:/ # df -h
Filesystem Size Used Avail Use% Mounted on
/dev/block/mmcblk0p23 2.4G 680M 1.7G 28% /system
Just take 'arm' and not 'arm64'
Gapps need to be flashed at first rom flash!
NEW RELEASE
2017-06-13:
Xperia Z3
Download
md5: 2d4ca5f88de0303575f2ab9c249d521f
TWRP 3.1.1 - 2017/06/09
Xperia Z3 Dual
See below
md5: 360fd6f9e0e22eb4ff0de72059c7de24
TWRP 3.1.1 - 2017/06/09 | Mandatory if coming from Z3 builds or new to the rom.
Temporal Z3 Dual rom (fixes SIM problems)
nailyk said:
Many thanks to @xkeita for providing a working rom as soon as the device get delivered.
20170622 / b8a79c826ddf0a786010cc04b3943b2e
twrp / 61e8c27f19c114dc9ac1f33dd4c7fb39
Rom is tagged nailyk because I build it but everything on it is @xkeita work!
Many thanks everybody
Click to expand...
Click to collapse
What's new:
Code:
- Updated Camera profiles
- Reworked Z3 Dual RIL
- Updated Audio HAL flags
- BFQ I/O Scheduler
- Bluetooth aptX support
- Qualcomm Connectivity Engine support
- Imported audio ids from original .291
- ANC Headphones support
- Dual Mic config enabled for voice calls/audio recording
- Ok Google everywhere fixed (untested)
- Tweaked autobrightness (again)
Release notes:
2017-06-09 is just a minor update with some [experimental] tweaks for bt connections and fixed minor issues with z3dual
Older Releases
Based on Kernel 3.4
Some of these can be found here
Release History
Code:
2017-06-09:
- Tweaked a little bluetooth values (untested)
- Fixed Z3 Dual sim problems
- Latest Google source (7.1.2_r17)
- June security updates
- Permission fixes for new PowerHAL
- Z3 and Z3 Dual code cleanup
- Forced camera modes to [email protected], [email protected], [email protected], [email protected]
- Fixed all of the device sensors (they're all online and working properly now)
- Latest LineageOS updates
- Smoother UI rendering with CPU
2017-05-17:
- Tweaked general audio output processing
- Updated vendor audio libraries configs (enables qcom effects)
- Auto brightness/brightness changes
- New thermanager configs based on stock
- Changed deprecated Gello for Jelly
- Some device tree cleanup
- General radio/wifi tcp updates
2017-04-16
- Audio changes,
- NFC fixes,
- Brightness changes,
- Verbosity increased for logs after night reboot + PERISTENT_TRACER
- No more vol- buton at boot time
- A lot more
2017-04-05:
- Enforcing selinux
2017-04-01:
- Audio fixes
- Encryption fix
- A lot more that I can't remember right now
2017-03-22:
- Full rework based on stock 3.4 kernel
Based on Kernel 3.10 by @nailyk
2017-01-23:
Download
md5: 04a3a614d820df78e7a70538df61203d
sha1: 10a3ea95d823a6b87b5f5a8f79896e3dabf7a8b5
Status
Workaround for in-call reboot
Include PR1130 PR1128
2017-01-15:
Download / 2
md5: 8b8898c18d631dc7f9d78a18b1e7500f / b40c7ba870ae579827e1bd7a427afc1f
sha1: 588d2c1e0fd2ef4790706980fc1050a8d793d559 / f28ba7714987a94c5ba43a6ee39fe05f0b5a5fca
Use of the reworked device trees
Include some experimental kernel pull requests
2017-01-01:
Download
md5: 6c5abcbeda01c75344cd4296bb2358d1
sha1: a46ef81e2d26ac9610f16cb90bc13e63d58a2983
Switch to LineageOS
Bluetooth deepsleep fixed
2016-12-02:
Download
md5: 496de65608fd4236f5d451a4179e1ce8
sha1: 74a25eabc0f8ac5be3458bd9d98461f9519c7c73
Bluetooth improvements
P.S.: i'm almost affiliated to LineageOS, just like tomascus who made everything.
Sources
Manifest file.
Everything else is Lineage.
Contribute gerrit.
XDA:DevDB Information
LOS-14.1, ROM for the Sony Xperia Z3
Contributors
nailyk, xkeita
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Beta
Beta Release Date: 2017-06-09
Created 2016-11-27
Last Updated 2017-07-01
Thank you!
Thanks to
@tomascus
@xkeita
@derf elot
@panzerox123
@Robot76
@gr8st
@mcgi5sr2
@rcstar6696
@yecomixer
@TheAvengingTITAN
@@AdrianDC
@@doriandiaconu
@SuperLamic
@DiscMan55
@drakonizer
@aclegg2011
@DevUt
@tomascus
@blackhawk_LA
@erickas
@malacha
@jimRnor
@optimumpro
@steadfasterX
@Myself5
All the members of the ivy team: @Quarx, @Olivier, @cdesai, @Myself5 and the one I miss.
TeamWin
LineageOS
All the dev who made the downstream kernel
All of you for testing rom and supporting me
FAQ
How to post
I want to say thanks --> Thanks you. Gratitude is really important for us. Find some posts from us and hit thanks buttons. It will be most appreciated You can also use @tomascus donate link.
We are here into the dev thread, not user one. For now the rom is under development.
We wont talk here about not related to device problems (where is foo setting, how to flash bar).
Reports will simply be ignored if already answered.
Reports without logs or step to reproduce are useless (read contribute).
Substratum is officially not supported into Lineage.
You are welcome to post your review: what is working, not working, etc... Check into know issues before.
You are welcome to post your unusual and not supported use-cases (like: "I have only ipv6 at home and the RA doesn't work without IPv4")
You are welcome to report any typo, error, etc...
No variant are supported now. Only D6603. You want support for variant? Consider help on porting or a hardware donate.
My device is screwed and I need it for my job interview in 1h --> go to IRC (how to report problem, #3)
I want say how SODP is bad --> Read this and above.
This is not against you but try to keep thread clean as a dev reference. Thanks in advance.
What is not working
BT headset calls --> pending. Detailed post.
OTG --> 2017-04-16
Wifi auto connect (boot/deepsleep),
HW Encryption, --> 2017-04-16
Vibrator level
4k (unfixable without Sony camera app)
120 fps (pending)
Some volume loudness problem --> not reported
Microphone when ok google is installed (do not install gapps will fix! An app which constantly record your microphone is a malware!) -->Pending,
Slow charging,
Phone reboot at 3AM while plugged-in, --> Workaround disable "auto time" into settings.
NFC, --> topic
Wifi access point,
Adaptive brightness not good. --> Fixed by @xkeita
How to report problems
To report problems there are multiples ways, depend on each person. The How to contribute section provide information on the way to do and should be applicable to everyone. The How to get logs section is the final touch on how to report problems.
Thanks wanting reporting, as, for an early development rom, reports are a necessary step to move forward
Some examples:
I cannot record videos with open camera.
Click to expand...
Click to collapse
Is useless on a dev thread and you probably won't get an answer.
Just wanted to report that this ROM doesn't support my 128gb sandisk SD card..and gives a message, unsupported SD card and asks to format.. this is the only bug which prevents me from using this ROM.. however the same card works perfectly fine on all other ROMs like 7.1 CM or AICP ROM and also all lollipop ROMs and stock ROM.
Click to expand...
Click to collapse
Is better as there is explanation, context and cross rom tests. With log this report used to be perfect.
This guide is really detailed and explained everything about bug reports. (deserve all bug-report cases, not specially this thread or xda)
@steadfasterX write a good guide about IRC, here you can get quick support (like when your device is totally broken, etc...)
steadfasterX said:
You talked about using IRC to get support. What is this and how can I use that?
Meaning of IRC => Internet Relay Chat. A very good IRC client is this one here: hexchat <-- download it and read the quick intro to get started: Quick-Start
--> when asked if you want to join a channel type in "#LineageOS" and after connected you will be in.
If you do not want to install anything you can simply use the webchat instead directly over here: Webchat
Howto communicate? IRC means many people talking the same time and there are some goods and bads to know about using IRC.
So please read this mini and very quick overview (especially the good manners there): Good manners in IRC (matches for all OS not for fedora only)
Click to expand...
Click to collapse
How to get logs
Here you have some info about how collecting log. It is always better to include reference to the Installed version.
How to contribute
I have c knowledge:
All the sources to build this rom are public and are provided into the manifest, in the howto build section. It means all the repository are from LineageOS github, except those mentioned into this manifest. Depending on where you find the bug/improvement there is different way to contribute: gerrit, github PR, etc... Contact me to test with you patch as everyone can try and give feedbacks then join IRC to discuss the best way to merge.
Code is like hieroglyphs for me:
No worries you can contribute anyway! Install the rom, do tests, read failure logs, look at internet for potential fix/similar users experience, is the biggest part of debugging. Then collect all of this and write your results here.
Code is like hieroglyphs for me and logs are worst:
No problem, collects logs the right way if you can, explain how you encounter the problem: detailed step to reproduce could be enough: explain exactly how you encounter the error/problem, it should produce each time someone repeat your steps. Then we will be able to fix it.
Installed version
When reporting problems, specially for work in progress, it is good to provide the build version:
- 'uname -a' will give you the kernel version,
- 'getprop ro.cm.display.version' will give you the rom build version.
What is LineageOS
LineageOS is re-brand of CyanogenMOD. At the end of 2016 some bad things appends. Lineage is the same rom that CyanogenMOD so you can still dirty flash, etc... However as all *cyanogenmod.org services are down, OTA update will not work until you flash lineage one time.
Thanks for posting this rom. Thank you for your awesome developing.
Great work man!!! I hope you will continue you work on CyanogenMod for Xperia Z3!!! Thanks
great work and z3 compact?
What I don't understand is you seem to be having a whole bunch of issues with CM, whereas Rhine devices build perfectly well and all features work on them.
Have you tried building AOSP using Sony Xperia dev sources?
Back in the cm13.0 days, all I used to do to build cm13.0 was use all AOSP device trees and HALs and just make a cm.mk and include vendor/cm/common_phone.mk and everything used to work perfectly fine. Have you tried that?
Anyway, I love the way you develop and your determination. I hope to see you around here often!
drakonizer said:
What I don't understand is you seem to be having a whole bunch of issues with CM, whereas Rhine devices build perfectly well and all features work on them.
Have you tried building AOSP using Sony Xperia dev sources?
Back in the cm13.0 days, all I used to do to build cm13.0 was use all AOSP device trees and HALs and just make a cm.mk and include vendor/cm/common_phone.mk and everything used to work perfectly fine. Have you tried that?
Anyway, I love the way you develop and your determination. I hope to see you around here often!
Click to expand...
Click to collapse
Thanks a lot but your are in a position to know that all the dev had been done by others and I am only porting for now
The biggest source of issue building CM was the codename change. Into sonyxperiadev and all other close to OEM codename is 'leo'. Historically cm rename the device to 'z3' because they already have leo (HTC hd2, IIRC). Here start the pain: as you build too you know a *bunch* of files are codename dependent. Also I wonder if a codename check isn't present into blobs.
I haven't tried to build aosp for now as I didn't have enough free space and wont learn another toolchain. But I test carbon rom which is really efficient.
I tried what you said and give me the best result. Now my branch are ~even with sonyxperiadev. The problem is those version can't be pushed to official CM repo.
We are now experiencing problems on hardware accelerated display, like FPS drop, but I'm not able to fix this. So next step is deep sleep. Are you experiencing this too? Can I ask you some points about this please? Like enabling debugfs, collecting logs after tests etc...?
Edit:
mcgi5sr2 said:
We are still getting echo on the line and a static in call volume issue on the d5803 with latest sources. rancidfrog has provided logs
https://github.com/sonyxperiadev/device-sony-aries/issues/49#issuecomment-263256754
is the issue isolated to the Aries or do Leo users have this issue as well? Similar question to Honami board devices?
Click to expand...
Click to collapse
Can you report me as I can answer please?
nailyk said:
Thanks a lot but your are in a position to know that all the dev had been done by others and I am only porting for now
The biggest source of issue building CM was the codename change. Into sonyxperiadev and all other close to OEM codename is 'leo'. Historically cm rename the device to 'z3' because they already have leo (HTC hd2, IIRC). Here start the pain: as you build too you know a *bunch* of files are codename dependent. Also I wonder if a codename check isn't present into blobs.
I haven't tried to build aosp for now as I didn't have enough free space and wont learn another toolchain. But I test carbon rom which is really efficient.
I tried what you said and give me the best result. Now my branch are ~even with sonyxperiadev. The problem is those version can't be pushed to official CM repo.
We are now experiencing problems on hardware accelerated display, like FPS drop, but I'm not able to fix this. So next step is deep sleep. Are you experiencing this too? Can I ask you some points about this please? Like enabling debugfs, collecting logs after tests etc...?
Edit:
Can you report me as I can answer please?
Click to expand...
Click to collapse
As far as I know, which is from my honami tests, deep sleep issue was present only in AOSP builds. A quick look at BBS revealed that it was the radio(ProxyServer) that kept the device awake, and using the phone without SIM would let it go into deep sleep.
When I got a chance to build and test cm14.1, there was no such issue with deep sleep.
In order to figure out whether we have the same issue, could you (or someone else in this thread) use BBS and tell me what the app says?
As for hardware issues: since you're using Sony HALs and device trees, I don't understand why you're having said issues.
AOSP doesnt need any new knowledge, in fact, it should be easier to build and test. If you can clear some space, I suggest you try it. It could rule out any issues with the device trees or Sony HALs, and then you can focus on finding the issue with CM.
Hello, I dont get it, where is the download?
I want it sooo badly, but I am to dumb to find the download
Shadow of Destiny said:
Hello, I dont get it, where is the download?
I want it sooo badly, but I am to dumb to find the download
Click to expand...
Click to collapse
As you can see there are no releases in the opening post. I guess that if you really want to help testing you have to ask nialyk for a flashable version. Be aware though that, as stated by the developer, the ROM has still many bugs that harm usability.
mattia.bf said:
As you can see there are no releases in the opening post. I guess that if you really want to help testing you have to ask nialyk for a flashable version. Be aware though that, as stated by the developer, the ROM has still many bugs that harm usability.
Click to expand...
Click to collapse
Well, thanks then.
Shadow of Destiny said:
Hello, I dont get it, where is the download?
I want it sooo badly, but I am to dumb to find the download
Click to expand...
Click to collapse
Link is not yet added because I'm dealing with weird GPU issues and I'm waiting for a feedback about a fix before adding it. It should be ok in some hours.
drakonizer said:
As far as I know, which is from my honami tests, deep sleep issue was present only in AOSP builds. A quick look at BBS revealed that it was the radio(ProxyServer) that kept the device awake, and using the phone without SIM would let it go into deep sleep.
When I got a chance to build and test cm14.1, there was no such issue with deep sleep.
In order to figure out whether we have the same issue, could you (or someone else in this thread) use BBS and tell me what the app says?
As for hardware issues: since you're using Sony HALs and device trees, I don't understand why you're having said issues.
AOSP doesnt need any new knowledge, in fact, it should be easier to build and test. If you can clear some space, I suggest you try it. It could rule out any issues with the device trees or Sony HALs, and then you can focus on finding the issue with CM.
Click to expand...
Click to collapse
IDK what BBS is but the /sys/kernel/debug/wake_lock table is really instructive. From the early experiments we have two issues: like you ril is one of them, and usb is the second one. If your reboot the device in airplane mode without usb attached wake_locks are a bit better.
Yes building AOSP is a good idea but @accleg2011 never get it working so I really doubt I can. Device was really fine on CAF display, game were really smooth, menu too. With SODP display menu are ok now but game are laggy and I don't know how to check if they are software or accelerated rendered. I tried to mimic hammerhead config.mk (it is the same device than z3 except for camera) but it doesn't provide results. I'm almost sure it is another PEBKAC with a missing flag.
I have a bunch of log to analyse and will post my results a bit later. Thanks for your advice, maybe I simply should buy another ssd.
If you have some time to waste, can you try frozen bubble on your device with SODP display, please? When balls pop, it is the most GPU intensive rendering. Is it laggy for you too? (from what I see ~5FPS)
nailyk said:
Thanks a lot but your are in a position to know that all the dev had been done by others and I am only porting for now
The biggest source of issue building CM was the codename change. Into sonyxperiadev and all other close to OEM codename is 'leo'. Historically cm rename the device to 'z3' because they already have leo (HTC hd2, IIRC). Here start the pain: as you build too you know a *bunch* of files are codename dependent. Also I wonder if a codename check isn't present into blobs.
I haven't tried to build aosp for now as I didn't have enough free space and wont learn another toolchain. But I test carbon rom which is really efficient.
I tried what you said and give me the best result. Now my branch are ~even with sonyxperiadev. The problem is those version can't be pushed to official CM repo.
We are now experiencing problems on hardware accelerated display, like FPS drop, but I'm not able to fix this. So next step is deep sleep. Are you experiencing this too? Can I ask you some points about this please? Like enabling debugfs, collecting logs after tests etc...?
Edit:
Can you report me as I can answer please?
Click to expand...
Click to collapse
Hi I posted this in a different thread and am confused as to how it came up in your CM14.1 thread. I build using all the sonyxperiadev device trees
mcgi5sr2 said:
Hi I posted this in a different thread and am confused as to how it came up in your CM14.1 thread. I build using all the sonyxperiadev device trees
Click to expand...
Click to collapse
Pardon my clumsy. I quote you here because thinking that cm can provide useful results for your question as we are using the same devices trees and blobs. Won't do it again.
nailyk said:
Pardon my clumsy. I quote you here because thinking that cm can provide useful results for your question as we are using the same devices trees and blobs. Won't do it again.
Click to expand...
Click to collapse
Hey no problems, I'm actually battling just to get my latest CM build to install properly
mcgi5sr2 said:
Hey no problems, I'm actually battling just to get my latest CM build to install properly
Click to expand...
Click to collapse
Do you take a look at Myself5 repos ? You can ask him a CarbonRom test but his repo where very helpful for leo. Also, maybe you can reuse mine and we can concentrate our efforts. I try to be as close as possible to SonyCM ones.
I will update the OP with the build instructions when XDA will work.
2016-11-28 release
Rom link added.
I'm currently uploading screenshots.
A bunch of peripherals are broken. Since I test this PR bluetooth is broken.
Hardware accelerated part are missing or broken.
Camera is partially working, switching to video mode crash camera app.
Deep sleep still not working.
Gps seems to be broken too.
Don't forget we are into a dev thread please, so post comments with logs, faulty line or patches. Thanks.
This rom is not intended to be used as a daily driver and is unstable!
cm14.1 wowww :good:
After a total mess-up with bluetooth, a full rebuild make it ~work again (still some crash).
And 3D apps seems to be working too.
Can you confirm/infirm difference please?
It's me again with the Oreo Edition of Aldeon Surround Sound Mod
Download the attachment, go to /system/etc and rename the existing mixer_paths_0.xml to mixer_paths_0.xml.bak then copy the new mixer_paths_0.xml and change the permissions to rw-r--r-- or 0644.
It won't damage your earpiece so keep calm
Features:
- louder than stock
- left and right channels
- better for utilisation in landscape
- now clicks will work in "surround mode"
To download on mobile just use Chrome, long press on attachment and click "Download link".
To adjust the volumes:
- open /system/etc/mixer_paths_0.xml
- search for "Output volume stage" then look at the "gain-media-speaker" path
- decrease or increase by 2 or more (not recommended) the "46" and "36" values (2 values for HPOUT3 and 2 for AIF4TX) to the values you want
Don't ask me "Does this mod work on XYZ ROM?". The answer is "I don't know, test and report!".
It should be compatible with all models.
Compatible with all 8.0.0 ROMs.
Possibly compatible with S7
If you want to use this in your ROM, give me the proper credits and you are done.
Credits to @AlexisXDA for his original work on the 7.0 Surround Sound. After converting his changes to a "patch" I was able to apply that "patch" to our mixer_paths_0.xml. It needed a lot of testing.
Nice work. Will be useful in the near future
rifek4 said:
Nice work. Will be useful in the near future
Click to expand...
Click to collapse
minealex2244 said:
It's me again with the Oreo Edition of Aldeon Surround Sound Mod
Download the attachment, go to /system/etc and rename the existing mixer_paths_0.xml to mixer_paths_0.xml.bak then copy the new mixer_paths_0.xml and change the permissions to rw-r--r-- or 0644.
It won't damage your earpiece so keep calm
Features:
- louder than stock
- left and right channels
- better for utilisation in landscape
- now clicks will work in "surround mode"
To download on mobile just use Chrome, long press on attachment and click "Download link".
To adjust the volumes:
- open /system/etc/mixer_paths_0.xml
- search for "Output volume stage" then look at the "gain-media-speaker" path
- decrease or increase by 2 or more (not recommended) the "46" and "36" values (2 values for HPOUT3 and 2 for AIF4TX) to the values you want
Don't ask me "Does this mod work on XYZ ROM?". The answer is "I don't know, test and report!".
It should be compatible with all models.
Compatible with all 8.0.0 ROMs.
Possibly compatible with S7
If you want to use this in your ROM, give me the proper credits and you are done.
Credits to @AlexisXDA for his original work on the 7.0 Surround Sound. After converting his changes to a "patch" I was able to apply that "patch" to our mixer_paths_0.xml. It needed a lot of testing.
Click to expand...
Click to collapse
it worked correctly, but when it increases to the maximum, the music just pauses, and the volume goes down, what can it be?
LuizHBr said:
it worked correctly, but when it increases to the maximum, the music just pauses, and the volume goes down, what can it be?
Click to expand...
Click to collapse
I didn't have that issue but it could happen because of a "safety decrease" of volume so it won't damage your speakers.
Thanks you ???
On 8.1 no file found. Why
zeuszos said:
On 8.1 no file found. Why
Click to expand...
Click to collapse
There is.
minealex2244 said:
There is.
Click to expand...
Click to collapse
No
zeuszos said:
No
Click to expand...
Click to collapse
Then I have no idea.
Works on Lineage os 15! Thank you! Sound from earpiace at Max volume is a bit dissorted but not much
will try near future
zeuszos said:
No
Click to expand...
Click to collapse
Try in /system/vendor/etc
That's where it was for me (RR 8.1).
It works, but I don't know, sounds wrong in a weird way.
Thanks for your work anyway!
This overlay APK it's "born" because of the necessity to overcome missing overlays (thanks Huawei, love ya xoxo) under /vendor/overlay .
What it does exactly?
Nothing more than adding AOSP overlay matching our device capabilities and also, inherits Prague power profile.
Do I need it?
Well, better having than don't.
This will conisderably enhance your experience on every GSI ROM giving better functionality overall.
Why you did that?
Because I'm sick of inheriting stuff that belongs to /vendor, in system.
Project Treble it's all about separating vendor implementation from system.
So why we should keep adding OEM stuff in there, if it doesn't belong no more in /system?
I have XYZ device with ZYX firmware can I use it?
As long as you're on a PRA-*** device (with a non-EMUI firmware), you're good to go.
Otherwise DO NOT USE IT FOR THE LOVE OF MANKIND.
I don't have PRA, but I want it on my Huawei device !
Well, that's fine, join the Telegram group @GSI_HI6250, so that you could help me with stock files grabbing to make an overlay for your device.
Overlay configs (aka "what does dis do, ser tell pl0x"):
Allows all rotations;
Configs autobrightness levels;
Configs autobrightness Lcd values;
Configs BLE;
Sets Doze Component;
Sets Doze After screen off;
Configs autopowermodes (doze related);
Configs power management on:
screen off due to proximity sensor interaction;
decouple on suspend state;
Configs brightness doze value;
Configs Intrusive led;
Configs dual band wifi support (where available);
Configs hotswap (where available);
Configs Color Transform on HWC;
Configs VoLTE available (even tho it needs support on GSI side);
Configs WFC over IMS;
Configs wifi background scanning support.
Installation Instructions
Download the overlay from the Downloads session.
With root, push the overlay to /vendor/overlay. Create the folder if it doesn't exist.
Run the following command in a rooted terminal or ADB shell:
Code:
chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay;chcon u:object_r:vendor_overlay_file:s0 /vendor/overlay/dil3mm4-overlay-PRA.apk
XDA:DevDB Information
[Overlay] Dil3mm4's Overlays for Prague Series devices (all variants), Device Specific App for the Huawei P8lite/P8 Lite
Contributors
Dil3mm4
Version Information
Status: Stable
Created 2018-06-26
Last Updated 2018-06-26
Definitely will be useful. Thanks a lot, Dil3mm4!
Hi Dil3mm4,
Thanks for your work, but I'm not sure what this app does exactly, will it help me for example with substratum themes? Thanks
Hi @Dil3mm4 let me understand correctly:
- i'm under LineageOS 14.1 (Haky86 version). Am i concerned with your fixes ?
- i plan to go to LOS 15.1. Should i flash LOS 15.1 before, then install your fixes ?
- if i can go to LOS15.1 from Prject Treble, what device should i choose ? A or A/B ? I assume this is ARM64.
Thank you VM back in the ROM selection after 1 year, and i have things to understand
Graveen said:
Hi @Dil3mm4 let me understand correctly:
- i'm under LineageOS 14.1 (Haky86 version). Am i concerned with your fixes ?
- i plan to go to LOS 15.1. Should i flash LOS 15.1 before, then install your fixes ?
- if i can go to LOS15.1 from Prject Treble, what device should i choose ? A or A/B ? I assume this is ARM64.
Thank you VM back in the ROM selection after 1 year, and i have things to understand
Click to expand...
Click to collapse
Our device is arm64 A only (PRA-LX1 is my device)
If the APK is included in the rom u want to flash just run the command below, if not, after flashing just install the overlay according to the instructions. Have a nice day!
I will probably make a question that doesn't make sense since it's probably hardware related. But will this overlay add 5ghz support to our devices?
mannas said:
I will probably make a question that doesn't make sense since it's probably hardware related. But will this overlay add 5ghz support to our devices?
Click to expand...
Click to collapse
Nope
UPDATE
-P compatibility
-Improved brightness levels
DOWNLOAD
Hey Dilemma! I have an issue with all the Treble Roms. After listening to music for a while, the playback stops and I have to restart it, or when I plug a headphone in and then out, sound usually doesnt come out of the speaker. Will this overlay fix the issues I have with treble Roms? Thanks in advance
Please help with a little overlay
Dil3mm4 said:
This overlay APK it's "born" because of the necessity to overcome missing overlays (thanks Huawei, love ya xoxo) under /vendor/overlay .
I don't have PRA, but I want it on my Huawei device !
Well, that's fine, join the Telegram group @GSI_HI6250, so that you could help me with stock files grabbing to make an overlay for your device.
Click to expand...
Click to collapse
Hello Dil3mm4.
Sorry to send you PM, i see after sending that's not ok. I really want to solve Overlay issue for my Huawei Fig-LX1.
I try to join Telegram group indicated by you but could not find it. Maybe is not existing anymore. So - my last chance is you to respond here.
I just want you to make an overlay for my phone to work better with Phusson Treble 8.1. Just tell me what files do you need and i will do it.
Maybe you answer me.
Thanks!
Hi, by fixing BLE, you mean bluetooth low energy, like huawei band, fossil Q ?
thanks
Thanks! U did great!
Hi
I've tried to install this file but after I've enter the code, it says system is readable only.
I've tried with adb shell and terminal(booth of them rooted) and it didn't work
I've even tried to mount system as rewritable but it didn't work.
I'm on Aex 6.6 latest version(and I was on PRA-LA1 8.0.0.370 C185 before i flashed this custom rom)
What should I do to fix this error?
Traceur017 said:
Hi
I've tried to install this file but after I've enter the code, it says system is readable only.
I've tried with adb shell and terminal(booth of them rooted) and it didn't work
I've even tried to mount system as rewritable but it didn't work.
I'm on Aex 6.6 latest version(and I was on PRA-LA1 8.0.0.370 C185 before i flashed this custom rom)
What should I do to fix this error?
Click to expand...
Click to collapse
install terminal emulator , put the .APK (be sure to rename the last build taking the -P ) in the mencioned directory but first run the following command:
su
mount -o remount,rw /vendor
after this you can run the command for the apk.
It worked for me. or at least.. didnt gave an error... so.. lolol
I think I've installed it correctly but How can I see changes? Nothing added!
Hello, I have a PAR-AL00 device. Can you make an overlay for me.and Telegram group @GSI_HI6250, I can't find it.Thank you verymuch.
I don't understand, where is the overlay link?
Edit : Sorry, I didn't know it was in the download tab.
I can't find it where is it?
artus777 said:
I don't understand, where is the overlay link?
Edit : Sorry, I didn't know it was in the download tab.
Click to expand...
Click to collapse
Is this overlay necessary under Lineage 18.1 (PRAGUE device and EMUI 8.0.0.390)?
@Dil3mm4 Thread closed! Please advise the moderators team (best via the report function) to re-open the thread when ready to provide a download link for this former DevDB thread.
Regards
Oswald Boelcke
Senior Moderator
Code:
*** Disclamer
Please behave responsibly and avoid thermonuclear war. I am
not responsible for any bricked devices, etc.
Introduction
This is Zest Kernel. It's an optimized kernel for our device which includes a few nifty features. Built, on every security update, you'll have the best of the best. Features will be listed below and shared, to the most of my ability, across all my supported devices. This isn't just my kernel it's yours too - request any features you like and I'll try to add them in. However, I'm also busy with studies so please don't ask for dumb stuff.
Click to expand...
Click to collapse
Images
Possibly the fastest [clean] ROM for our device, benchmarks coming soon .
Click to expand...
Click to collapse
Features
Google's exclusive features for Pixel devices (except Music Ticker and Call Screening)
Lawnchair launcher
Spoofed stock device to pass SN
Widevine L3
Faster encryption device-wide
Daydream VR
Fast, optimised Zest Kernel
EAS
Markup screenshot editing
Google Sound Picker
Google Wallpapers
Digital Wellbeing
Optimised GPU rendering for Pie
Custom Clang and GCC toolchains for building - optimised LLVM with PGO, and GCC 9.1
OpenGApps pico included
GCam HDR+ support
Click to expand...
Click to collapse
Installation instructions
* Go download https://developer.sony.com/file/download/software-binaries-for-aosp-pie-android-9-0-kernel-4-9-yoshino.
* Unzip the download to get an .img file.
* Install fastboot (drivers for this can be gotten from Google directly), drivers for flashmode for Windows can be gotten from newflasher.
* Enter your command prompt or terminal whatever and fastboot flash oem THEFILEYOUEXTRACTED.img.
* Find a decent TWRP and flash it.
* Download the ROM for your device. They are all in this folder https://jenkins.cosmic-os.org/job/zfsodp-core/ws/lastbuild so click the one for your codename (eg. G8141 is single sim maple and G8142 is dual sim maple).
* Flash it in TWRP and wipe internal storage and format data (the option that has red text and makes you type yes).
* Enjoy!
Click to expand...
Click to collapse
Download
Latest is on my Jenkins job.
Click to expand...
Click to collapse
FAQ
PM me in XDA's Sony group.
Click to expand...
Click to collapse
Special Thanks To
Code:
* @kholk for his kernel advise
* @Sultanxda for his kernel advise
* @deletescape for Lawnchair
XDA:DevDB Information
Zest-flavoured SODP, ROM for the Sony Xperia XZ Premium
Contributors
LazerL0rd, The entire SODP team
Source Code: https://github.com/ZfSODP
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest Sony OSS OEM binaries
Based On: SODP
Version Information
Status: Beta
Beta Release Date: 2019-07-06
Created 2019-07-06
Last Updated 2019-08-10
Reserved
Reserved
nice, try tonight:good:
----------------------------------------------------------------------------------------------
HAVE BEEN DELETED, I don't know what happen, his own website and his kernel is also deleted.
I have the same as the #5, but a bit different, there were 4 identical page on the screen, such like 4 1080p in a 4k screen, I think the 120HZ 1080p display driver is the reason.
I was on latest stock when flashing (following every step), when it boots and show the sony logo, it gets distorted (characters in the top and middle) and then reboots. I've reflashed stock, wiped everything including system, tried older twrp, and even flashed the G8142 image on my G8141, but i keep getting the distorted sony logo followed by a reboot. Is there anything else i have to do?
I had this issue before with AOSP but i never figured out how to fix it.
G8141, unlocked bootloader, .80 stock, twrp 3.3.1.0 and 3.2.3.0
del
Can I flash the kernel through twrp, then flash the zip?
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Psychoticism said:
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Click to expand...
Click to collapse
Give it a week or so mate, lazerl0rd is studying/having exams for a while.
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Any screenshot of the performance?
It was stopped at the android logo, it ran all night and did not enter the system. please help me!
still on logo android !/
Sjll said:
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Click to expand...
Click to collapse
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Laplacetor said:
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Click to expand...
Click to collapse
EAS is not stable on SODP. GPU of MSM8998 is hard to afford 120Hz.
Smooth, fast(20sec boot time including 5 second bootloader unlocked nag!) and clean rom thanks a lot! Sadly not going to be my daily driver because lack of features, and my device overheats sadly because of 120hz. Also it takes me 3 reboots to get into recovery any idea why?
Advices:
Get rid of pre installed google, allow users to install separately.
JamesDSP should be stabilized, I just get FC all time can't get it to work. (Would be better to just remove as well and allow user to install separately)
Default DPI is too low, should be 420 for ease of use.
Sony camera should be added, as in Sjll's LineageOS. ***
Ancient app logos (kitkat calendar calculator etc) should be updated.
Device-wide dark mode which includes Phone, Calendar, Settings and Files should be made. **
Phone application should be de-google-ified, Spam filter inside just feeds Google with private call data. ***
Option to switch resolution and frame rate on the go.
Heyo, wondering if you can add a quick and dirty CIFS kernel module. There are some universal versions floating around online.
Signing them is above my skill level. I don't know if the signing process has to be implemented on a device by device level. If that is an impediment, maybe consider removing the requirement for kernel modules to be signed in the first place? I don't know, I'm no expert.
Just a PSA. Someone got rclone mounts working via Magisk. Can be found in repo. Sadly, no support for cifs or nfs. But webDav works. The largest downside is that the mounts can't be mounted directly onto sdcard. Something the cifs kernel module did no problem. With rclone you'll need an app with root browsing capability. Or at least full access to /storage.
UPDATE: The rclone Magisk version has been updated to support direct sdcard mounts! Yay! So, there isn't really a need for a cifs module.
However, I'm certain the performance will be better with a cifs module. So, it's not necessary, but could be a cool benefit if added.
Thanks for all the work! It doesn't go unnoticed.
i hope you add other version special 90hz because 120hz make my device overheats and thank you
Moarten said:
I was on latest stock when flashing (following every step), when it boots and show the sony logo, it gets distorted (characters in the top and middle) and then reboots. I've reflashed stock, wiped everything including system, tried older twrp, and even flashed the G8142 image on my G8141, but i keep getting the distorted sony logo followed by a reboot. Is there anything else i have to do?
I had this issue before with AOSP but i never figured out how to fix it.
G8141, unlocked bootloader, .80 stock, twrp 3.3.1.0 and 3.2.3.0
Click to expand...
Click to collapse
Try again, a few of the previous builds were bootlooping, I'll try update instructions too.
Laplacetor said:
nice, try tonight:good:
----------------------------------------------------------------------------------------------
HAVE BEEN DELETED, I don't know what happen, his own website and his kernel is also deleted.
I have the same as the #5, but a bit different, there were 4 identical page on the screen, such like 4 1080p in a 4k screen, I think the 120HZ 1080p display driver is the reason.
Click to expand...
Click to collapse
Psychoticism said:
Hey the Download Link is unavailable. Also your website is 404. I can't obtain your Kernel -OR- rom
Click to expand...
Click to collapse
Try again, a few of the previous builds were bootlooping, I'll try update instructions too. ROM isn't on my website and never was .
wolfmanstr said:
Can I flash the kernel through twrp, then flash the zip?
Click to expand...
Click to collapse
Don't use my stock kernel with this.
Sjll said:
Hey, have you tested the performance of EAS kernel ?
Could you please test the scores of GeekBench ?
BTW, you'd better remove the rqbalance in devices tree and disable cpu_quiet in kernel.
Besides, you need to replace the PowerHal in common. The PowerHal of SODP doesn't support EAS, you need to port it from Pixel 2.
All in all, well done!
Click to expand...
Click to collapse
It performs better, battery is decent now (after a load of changes). We now (as of today) have a Power HAL (libperfmgr) which supports DT2W on supported devices too. I may or may not update it to version 1.3.
SilverGamer_YT said:
Any screenshot of the performance?
Click to expand...
Click to collapse
No, it's EAS and you could test it out.
tronganhha29 said:
It was stopped at the android logo, it ran all night and did not enter the system. please help me!
Click to expand...
Click to collapse
Yeah, I fixed that a while ago - try again please.
CRNO said:
still on logo android !/
Click to expand...
Click to collapse
Yeah, I fixed that a while ago - try again please.
Laplacetor said:
SOME Screenshots here. driveDOTgoogleDOTcom/folderview?id=1rrF_kQA5sU_FIlXxERuZG0dxiX3xHn1m(Sorry but I cannot put link before I have 10 post)
It broken easily if screen off so please hold it on all the time.
With 120Hz all the gpu text showed obvious frame fluctuation.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get lag" and like our phone can handle it on UI, at least. The worst case is battery but IIRC it wasn't too different from 60Hz. Anyways it's 90Hz now.
Sjll said:
EAS is not stable on SODP. GPU of MSM8998 is hard to afford 120Hz.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get lag" and like our phone can handle it on UI, at least. The worst case is battery but IIRC it wasn't too different from 60Hz. Anyways it's 90Hz now. EAS seems stable, here. The bugs we have aren't really EAS related.
undefine said:
Smooth, fast(20sec boot time including 5 second bootloader unlocked nag!) and clean rom thanks a lot! Sadly not going to be my daily driver because lack of features, and my device overheats sadly because of 120hz. Also it takes me 3 reboots to get into recovery any idea why?
Advices:
Get rid of pre installed google, allow users to install separately.
JamesDSP should be stabilized, I just get FC all time can't get it to work. (Would be better to just remove as well and allow user to install separately)
Default DPI is too low, should be 420 for ease of use.
Sony camera should be added, as in Sjll's LineageOS. ***
Ancient app logos (kitkat calendar calculator etc) should be updated.
Device-wide dark mode which includes Phone, Calendar, Settings and Files should be made. **
Phone application should be de-google-ified, Spam filter inside just feeds Google with private call data. ***
Option to switch resolution and frame rate on the go.
Click to expand...
Click to collapse
I don't get all this 120Hz issue, it's not as simple as "set 120Hz get overheat" and like our phone can handle it on UI, at least. I changed up the thermal driver so it should be good now. Btw those thermal modules in Magisk won't change a thing as I use sultan's thermal framework now - not RQBalance stuff. DPI has an option on setup under "vision", choose what you like. I added GCam instead, it's gonna be better quality than Sony's crappy cam app. Ancient app logos aren't gonna be updated, these are ASOP packages - instead I'm replacing them with Google packages. Also I made everything Squircle shaped too. Device-wide dark mode will be coming soon, needs some kanging [with original authorship] from Q. Phone application should be de-google-ified -> you can turn off the spam filter and install any Dialer you want. I'm not dealing with darkening AOSP's package so that's why I'm using Googles. Google can get your data if Play Services is installed anyways. Option to switch resolution and frame rate on the go -> idk why SODP removed that.
Astoras said:
Heyo, wondering if you can add a quick and dirty CIFS kernel module. There are some universal versions floating around online.
Signing them is above my skill level. I don't know if the signing process has to be implemented on a device by device level. If that is an impediment, maybe consider removing the requirement for kernel modules to be signed in the first place? I don't know, I'm no expert.
Just a PSA. Someone got rclone mounts working via Magisk. Can be found in repo. Sadly, no support for cifs or nfs. But webDav works. The largest downside is that the mounts can't be mounted directly onto sdcard. Something the cifs kernel module did no problem. With rclone you'll need an app with root browsing capability. Or at least full access to /storage.
UPDATE: The rclone Magisk version has been updated to support direct sdcard mounts! Yay! So, there isn't really a need for a cifs module.
However, I'm certain the performance will be better with a cifs module. So, it's not necessary, but could be a cool benefit if added.
Thanks for all the work! It doesn't go unnoticed.
Click to expand...
Click to collapse
For Android kernels, you can't just chuck a module in. But I'll add it to the kernel config for ya.
CRNO said:
i hope you add other version special 90hz because 120hz make my device overheats and thank you
Click to expand...
Click to collapse
Already done. And - "I don't get all this 120Hz issue, it's not as simple as "set 120Hz get overheat" and like our phone can handle it on UI, at least."
HELLo everyone...
After several weeks, months and before Android 12 released, i decided to share this ROM to this A51 community. Hopefully you guys enjoy it and don't offend me if the ROM is bad, so....let's get it ON.
Things to do before flashing:
1. Make sure you're on binary 5 (this ROM tested and using binary 5 vendor, so to avoid any broken or whatever error flash your device with latest firmware).
2. Backup your IMEI (highly recommended).
Flashing:
1. Clean flash is recommended. Flash kernel, flash J4F vendor and system.img, flash multy disabler (if necessary) then full wipe and also you can perform "typing YES" format. Reboot to recovery again, then flash as usual you guys always do (Magisk etc.).
ROM Features from S20 and Note 20 line up:
1. Samsung Dex (not full features coz need fix at kernel level).
2. Flagship live blur
3. Flagship edge lighting style
4. AirCommand (S pen)
5. LiveDrawing
6. Multy screen resolutions (HD+ - FHD+ - WQHD+)
7. 1000++ system fonts
8. Flagship sound quality and effects
9. Camera features unlocked (pro video etc.)
10. All original A51 features
11. Common tweaks here and there and so many possibility to unlock another S20 features
Bugs:
Minor glitch in pro mode video, and not really remember and deep testing everything, but hopefully still acceptable (hopefully ) but yeah..nothing's perfect, if you found one let's discuss together in A51 telegram group: https://t.me/samsunga51
Hall of Fame:
@MrWaehere for his awesome CRB kitchen
@VDavid003 and his rom TreeUI for my inspiration and countless help
@Yillié and his OFox recovery and also countless help and advise and ideas
@BlassGO and his Dynamic Installer, patches, advise and countless contributions (thanks for making AirCommand even greater lol)
@manudinath and his projects.
@Winb33 for fonts mod
@topjohnwu for Magisk
@ianmacd for multy disabler and TWRP
Stock Kernel Source
PM me if i forgot to mention someone.
Advise and Tips:
- It's normal during first boot if lags occurs, give the ROM some times to settle, finish your setup, update your apps and you good to go..
- It's better to avoid update in Galaxy store related to system app, such as MDE Service Framework, Samsung Core Services etc. It might causing conflict due to mixed up firmware. But anyway it's up to you.
- Please do not complain regarding app missing (getting debloated) and related to debloat. Because it's very hard to acomodate every person's taste. Bloatware is very Objective and absurd for each person and I know it's supposed to be using Aroma installer or any script but i don't have time that much to do that.
Download link:
**when you click this link and downloading, that's mean you're agree to all the consequences and i'm not responsible to anything - do with your own risk**
LINK
Pero peeps. Sorry for not being able to test all the stuff properly xD.
Yillié said:
Pero peeps. Sorry for not being able to test all the stuff properly xD.
Click to expand...
Click to collapse
nah, you have doing so great/ thank you s much for everything.
Testing .
perro
Ole its already, nice
Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.
@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50
BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
Ia possible wirh This vendor run fingerprint perfectly in havoc
Badger50 said:
@jagpanzer Please check your PM inbox. Thank you.
-Regards: Badger50
Click to expand...
Click to collapse
If run for You send details my friend
Someone knows how to pass CTSprofile in magisk with this rom?
gobblefunk said:
Quick question, what am i supposed to select while flashing J4F.img in TWRP, boot, recovery, optics img, prism img or super.
Click to expand...
Click to collapse
system and vendor.
BlassGO said:
Ole its already, nice
Click to expand...
Click to collapse
mhm...thanks for everything
jagpanzer said:
system and vendor.
Click to expand...
Click to collapse
Kernel 11 support this ROM?
Magisk 23.1
Download Magisk 706a4922 alpha apk
Download File Magisk 706a4922 alpha apk
apkadmin.com
Changelog magisk 23.1
DOWNLOAD VERSion ALPHA:
Magisk v23.1 (706a4922-alpha)
Changelog:
• Switch to zygisk to execute the deny list,
• Magiskhide has been completely removed
• Denylist Added
• Restart to take effect after changing the switch state of zygisk
• Major changes, some problems may occur, temporarily not pushed to the update channel
Others changes in APK:
[General] supports pure 64-bit devices
-[General] Support Android 12 emulator
-[Zygisk] code injection framework
-[General] Remove MagiskHide
-[General] Support simulator loading module
-[MagiskBoot] supports zImage format
-[MagiskBoot] Add zopfli encoder
-[MagiskInit] supports boot configuration
-[App] Repair installation function will now check whether the script under /data/adb/magisk/ is not updated
-[MagiskInit] supports some Meizu devices
-[MagiskSU] If supported by the kernel, use isolated devpts
-[MagiskSU] Fix pts configuration code, no additional sepolicy rules are now required
-[MagiskBoot] supports v4 boot image header format
-[MagiskInit] Support some OnePlus and Opal devices Oplus.fstab
-[App] The update module needs to be restarted, mark deletion is not allowed
-[App] Delete online warehouse
-[App] Add mount information to the saved log file
-[App] Adapt to Android 12 API level
-[App] Display running waiting pop-up window when hiding/resuming the application
-[Stub] Open source obfuscation function
-[Script] View and display the sepolicy rule folder of the module
-【App】Hide the screen overlay when you need to pop up the window. Android 12+
-[App] Delete the floating bottom bar and change it to a general bottom operation bar
-[General] Support compilation cache
-[General] Added rejection list function
-[App] Delete DoH
-[App] Delete SafetyNet
Can you please also make this rom for M30s ??
Because both have similar specs and same soc !
Bluetooth connect error
hacker812c said:
Kernel 11 support this ROM?
Click to expand...
Click to collapse
during testing i only test with BF2. you can try
Arya1999 said:
Can you please also make this rom for M30s ??
Because both have similar specs and same soc !
Click to expand...
Click to collapse
sorry, no time.
Inomjon6940🇺🇿 said:
Bluetooth connect error
Click to expand...
Click to collapse
last time i try with old BT 4.0 earphone was fine and also BT call. will test again, on last build i've made changes and could be broke something