How to go from Lineage OS 14.1 to stock? (Updated with the process & latest links)
I am currently on lineage OS 14.1 (7.1.2) dated 18.09.2017.
I want to go back to stock firmware as I am facing some issues with lineage.
How to find the latest firmware. Found this website which has all the images https://firmware.center/firmware/Motorola/Moto Z Play/Stock/XT1635-02/
But I am unable to select the correct one for my device. (do not want to brick it). Also found another thread stating latest firmware
https://forum.xda-developers.com/moto-z-play/help/addisonnpns26-118-22-1cid50subsidy-t3675521
I am an Indian MOTO Z Play
Is there a way to go full stock and also start to receive OTA updates. Can someone provide me with full guide with links?
First you need exactly your software channel and the build of your baseband and bootloader. You know how to get this information?
After a lot of tries, finally was able to go back to stock. Will be compiling a guide for other to follow with links.
On latest 7.1.1 with August patches.
Is there a problem with audio fx,
Even viper4android not working.
kkube said:
After a lot of tries, finally was able to go back to stock. Will be compiling a guide for other to follow with links.
On latest 7.1.1 with August patches.
Is there a problem with audio fx,
Even viper4android not working.
Click to expand...
Click to collapse
I'll be waiting for it.
Process to go from custom rom back to stock (August update)
There are several guides on going back from custom rom to full stock, but still I made this guide with latest links. I just went from LOS 14.1 back to full stock. Below is the step I took:
1) Download and install minimal ADB AND FASTBOOT
I used version 1.4.2 which is the latest version https://www.androidfilehost.com/?fid=745425885120698566
2) Download and install motorola drivers
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
3) Download the latest firmware
I used ADDISON_NPNS26.118-22-1 which has august security updates https://www.androidfilehost.com/?fid=673368273298986785
4) Extract the zip file (firmware) and move all its contents to the folder where you have installed minimal adb and fastboot
5) Create a text file, add the following text to it and save it as "launch.bat" in the same folder.
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk.0
fastboot flash system system.img_sparsechunk.1
fastboot flash system system.img_sparsechunk.2
fastboot flash system system.img_sparsechunk.3
fastboot flash system system.img_sparsechunk.4
fastboot flash system system.img_sparsechunk.5
fastboot flash system system.img_sparsechunk.6
fastboot flash system system.img_sparsechunk.7
fastboot flash system system.img_sparsechunk.8
fastboot flash system system.img_sparsechunk.9
fastboot flash system system.img_sparsechunk.10
fastboot flash system system.img_sparsechunk.11
fastboot flash system system.img_sparsechunk.12
fastboot flash oem oem.img
fastboot erase modemst1
fastboot erase modemst2
fastboot erase carrier
fastboot erase cache
fastboot erase userdata
fastboot erase DDR
fastboot flash fsg fsg.mbn
fastboot oem fb_mode_clear
echo -------------------------------------------------------------------------
echo please scroll up and check your flash for any errors
echo -------------------------------------------------------------------------
pause
fastboot reboot
exit
Click to expand...
Click to collapse
6) Switch off your phone and open it in fastboot mode (press power and volume down button for few seconds after phone as switched off)
7) Connect your mobile to your computer
8) Click on the launch.bat file that you saved and it will install stock firmware on to your mobile. It will take a couple of minutes. (It will wipe everything on your mobile so take a backup of your important data)
9) Once the process is complete, it will ask you to enter any key, after which it will reboot itself.
Once rebooted, you will have full stock, non rooted, and latest firmware with august patches.
Is this works with European version of Moto Z Play? Like I bought it from France. Thanks.
And can we do OTA updates after doing this?
Thank you so much for this guide, my phone was rebooting to recovery every single time and nothing worked. I flashed this rom as you said and my phone just booted and it's working. I can't believe it.
Is this works with European version of Moto Z Play? Like I bought it from France. Thanks.
Click to expand...
Click to collapse
My phone is reteu and after flashing is still on reteu, so it should be fine, dont worry. Also you should get any future updates via OTA.
kkube said:
There are several guides on going back from custom rom to full stock, but still I made this guide with latest links. I just went from LOS 14.1 back to full stock. Below is the step I took:
1) Download and install minimal ADB AND FASTBOOT
I used version 1.4.2 which is the latest version https://www.androidfilehost.com/?fid=745425885120698566
2) Download and install motorola drivers
https://motorola-global-portal.custhelp.com/app/answers/detail/a_id/88481
3) Download the latest firmware
I used ADDISON_NPNS26.118-22-1 which has august security updates https://www.androidfilehost.com/?fid=673368273298986785
4) Extract the zip file (firmware) and move all its contents to the folder where you have installed minimal adb and fastboot
5) Create a text file, add the following text to it and save it as "launch.bat" in the same folder.
6) Switch off your phone and open it in fastboot mode (press power and volume down button for few seconds after phone as switched off)
7) Connect your mobile to your computer
8) Click on the launch.bat file that you saved and it will install stock firmware on to your mobile. It will take a couple of minutes. (It will wipe everything on your mobile so take a backup of your important data)
9) Once the process is complete, it will ask you to enter any key, after which it will reboot itself.
Once rebooted, you will have full stock, non rooted, and latest firmware with august patches.
Click to expand...
Click to collapse
Thanks a lot for this guide! Just wanted to ask if it's safe and stable to root this and pass safetynet check.
Thanks for you time
Only way to root and still pass safetynet is via magisk
But unfortunately it needs a custom kernel with f2fs fix. However with 7.1 update motorola fixed it but broke some other things.
There is not a custom kernel for 7.1, so till then no way to root and have safety net.
But you can easily root via magisk
akshaypatil869 said:
Thanks a lot for this guide! Just wanted to ask if it's safe and stable to root this and pass safetynet check.
Thanks for you time
Click to expand...
Click to collapse
Only way to root and still pass safetynet is via magisk
But unfortunately it needs a custom kernel with f2fs fix. However with 7.1 update motorola fixed it but broke some other things.
There is not a custom kernel for 7.1, so till then no way to root and have safety net.
But you can easily root via magisk
Does anyone receive the update with September patch via OTA after back to stock following post #5 instructions?
This a fantastic guide - THANKS!!! - I have linked to it giving credit. Thanks!
I have also a thread, if you follow that one. Bootloader is locked/ u will be able to get ota'$
First, I assume you know what root, fastboot, SafetyNet, bootloader, adb is ( SEARCH FIRST BEFORE DOING THESE STEPS! ) and you know the risks of rooting a device!
Me nor the XDA guys are responsible for bricked devices, nor any damage to you and/or your device.
So, after that, let's dive into the steps of rooting it
First of all is to download your stock android image ( in case something goes wrong plus the boot.img needed for this process )
You can download your stock image the way you want, you can use lolinet etc, just make sure it matches your device!
So, open the image you downloaded, extract the boot.img file and put it on the phone's internal memory, then download Magisk Manager ( I personally used GitHub to download.... ) and open it.
Now, select 'Install' ( the one that says Magisk, not the manager ), go to 'Select and Patch a file'
Navigate and select your boot.img, then wait for it to complete, after that, you'll see a file in the Download folder on the phone called 'magisk_patched.img' grab this file and put it on the computer.
The next step is that you'll need to unlock your bootloader ( I'll not cover how to do that here, but a quick search on ' how to unlock Motorola bootloader' should help ), but be aware that it will format your phone ( you'll lose any saved data, so pay attention! )
After, put the phone in fastboot mode again ( vol minus + power button ), then on the terminal window you're using fastboot, run this command:
fastboot boot magisk_patched.img
( I assume you put the magisk_patched in the same folder you're running fastboot ( Windows case ) )
REMEMBER TO TEST EVERYTHING ON YOUR DEVICE IN THIS PART BEFORE CONTINUING!!!!!
IF YOUR PHONE DIDN'T BOOT OR BOOTED BUT WITH MALFUNCTION STOP NOW AND REBOOT IT, MAYBE YOUR STOCKROM WASN'T CORRECT OR SOMETHING ELSE...
After that your device will normally boot, install Magisk Manager and check if it "says" installed and displays the version.
If so and your device runs fine, reboot again to fastboot then run on the terminal window:
fastboot flash boot magisk_patched.img
This will make the root persistent after reboots
Now as you expected, you're rooted
A bonus tip:
Safetynet will fail! To fix that, open Magisk Manager, then go to it's settings, then tap to enable "MagiskHide" and then tap "Hide Magisk Manager" type a new name for the Manager and boom, that's it, now SafetyNet will work ( In my case it did hehe )
I'm new to English, learning alone, so any mistyping etc tell me and I'll fix it
Also I'm new to XDA too hihi
Thanks a lot for sharing your experience!
Has there been anyone else who managed to root this device?
I really want to buy one but first I want to make sure I will be able to root it from day 1. I don't like to use an unrooted phone
I bought my device last Black Friday and rooted it this week with this guide.
I’ve downloaded my boot.img from Lolinet and googled how to unlock a bootloader of a Moto phone.
I’ve also enabled oem unlock in developer settings.
It’s not so difficult.
The bonus tip from the OP is very helpful. Only rename Magisk is not enough. Also hide the manager to pass the safetynet test.
ReneZeiss said:
I bought my device last Black Friday and rooted it this week with this guide.
I’ve downloaded my boot.img from Lolinet and googled how to unlock a bootloader of a Moto phone.
I’ve also enabled oem unlock in developer settings.
It’s not so difficult.
The bonus tip from the OP is very helpful. Only rename Magisk is not enough. Also hide the manager to pass the safetynet test.
Click to expand...
Click to collapse
Amazing tips. I think in the end we are free to root it without screwing the device for good
Thanks!!
Ok, I got mine yesterday, and today I successfully root it.
It worked flawlessly!!
Thanks for the guide and advices!!
Root now si possible with twrp, new update thanks @seba_3567
MrZeroXD said:
First, I assume you know what root, fastboot, SafetyNet, bootloader, adb is ( SEARCH FIRST BEFORE DOING THESE STEPS! ) and you know the risks of rooting a device!
Me nor the XDA guys are responsible for bricked devices, nor any damage to you and/or your device.
So, after that, let's dive into the steps of rooting it
First of all is to download your stock android image ( in case something goes wrong plus the boot.img needed for this process )
You can download your stock image the way you want, you can use lolinet etc, just make sure it matches your device!
So, open the image you downloaded, extract the boot.img file and put it on the phone's internal memory, then download Magisk Manager ( I personally used GitHub to download.... ) and open it.
Now, select 'Install' ( the one that says Magisk, not the manager ), go to 'Select and Patch a file'
Navigate and select your boot.img, then wait for it to complete, after that, you'll see a file in the Download folder on the phone called 'magisk_patched.img' grab this file and put it on the computer.
The next step is that you'll need to unlock your bootloader ( I'll not cover how to do that here, but a quick search on ' how to unlock Motorola bootloader' should help ), but be aware that it will format your phone ( you'll lose any saved data, so pay attention! )
After, put the phone in fastboot mode again ( vol minus + power button ), then on the terminal window you're using fastboot, run this command:
fastboot boot magisk_patched.img
( I assume you put the magisk_patched in the same folder you're running fastboot ( Windows case ) )
After that your device will normally boot, install Magisk Manager and check if it "says" installed and displays the version.
If so and your device runs fine, reboot again to fastboot then run on the terminal window:
fastboot flash boot magisk_patched.img
This will make the root persistent after reboots
Now as you expected, you're rooted
A bonus tip:
Safetynet will fail! To fix that, open Magisk Manager, then go to it's settings, then tap to enable "MagiskHide" and then tap "Hide Magisk Manager" type a new name for the Manager and boom, that's it, now SafetyNet will work ( In my case it did hehe )
I'm new to English, learning alone, so any mistyping etc tell me and I'll fix it
Also I'm new to XDA too hihi
Click to expand...
Click to collapse
yes or yes I must download the full firmware, can't find the boot.img directly?
Hi, I root the G9+ with your guide and now it's rooted, thank you for post it. I want to change te system fonts, I have some visual impediments and I need a fonts with more contrast and bold. I try with Fontster, HiFonts, Zfonts, and many more. I grant root privileges to these via MagiskManager, but without any success. It's normal that? any idea why? The rootchecher confirm that the phone it's rooted. Please can help me? Thank you and please excuse my poor english
pmb6000 said:
Hi, I root the G9+ with your guide and now it's rooted, thank you for post it. I want to change te system fonts, I have some visual impediments and I need a fonts with more contrast and bold. I try with Fontster, HiFonts, Zfonts, and many more. I grant root privileges to these via MagiskManager, but without any success. It's normal that? any idea why? The rootchecher confirm that the phone it's rooted. Please can help me? Thank you and please excuse my poor english
Click to expand...
Click to collapse
I think u'll need to port your custom fonts as Magisk Modules, since you can't change system files directly ( even with root ).
Hi, I'm new to rooting the phone, I managed to unlock the bootloader, I did everything as in the description except the last step because the fastboot boot magisk_patched.img command did not work. So I copied the magisk file to the adb folder and typed: fastboot flash boot C: \ adb \ magisk_patched_INTjS.img. My phone touchscreen has stopped working. I'm very worried. Is it possible that I used the wrong stock image version or did I do it wrong? Now I wish the phone would just work
taboelephant said:
Hi, I'm new to rooting the phone, I managed to unlock the bootloader, I did everything as in the description except the last step because the fastboot boot magisk_patched.img command did not work. So I copied the magisk file to the adb folder and typed: fastboot flash boot C: \ adb \ magisk_patched_INTjS.img. My phone touchscreen has stopped working. I'm very worried. Is it possible that I used the wrong stock image version or did I do it wrong? Now I wish the phone would just work
Click to expand...
Click to collapse
So maybe your stock was wrong, if ' fastboot boot magisk_patched.img ' failed then u can't force ( fastboot flash ) the installation since it'll probably cause problems...
I suggest you try to download your stock rom and re-flash the boot partition, if no lucky, try using ' Lenovo rescue and smart assistant ' and hope it works again...
MrZeroXD said:
So maybe your stock was wrong, if ' fastboot boot magisk_patched.img ' failed then u can't force ( fastboot flash ) the installation since it'll probably cause problems...
I suggest you try to download your stock rom and re-flash the boot partition, if no lucky, try using ' Lenovo rescue and smart assistant ' and hope it works again...
Click to expand...
Click to collapse
Yes, I tried to enter this command but it said that it cannot find the file magisk. Tomorrow I will try to install the stock rom with RSD Lite if that's the right decision, with the help of this website: https://www.androidinfotech.com/moto-g9-plus-odessa-android-10/. If that doesn't help, I will have to give it to repaired because I won't be able to handle it myself.
taboelephant said:
Yes, I tried to enter this command but it said that it cannot find the file magisk. Tomorrow I will try to install the stock rom with RSD Lite if that's the right decision, with the help of this website: https://www.androidinfotech.com/moto-g9-plus-odessa-android-10/. If that doesn't help, I will have to give it to repaired because I won't be able to handle it myself.
Click to expand...
Click to collapse
Sincerely I would suggest using the Lenovo tool, it's simple to use, and guaranteed to pick the correct rom.
MrZeroXD said:
Sincerely I would suggest using the Lenovo tool, it's simple to use, and guaranteed to pick the correct rom.
Click to expand...
Click to collapse
OK I wiil try tomorrow reapir it with this lenovo tool, I wish it will help.
taboelephant said:
OK I wiil try tomorrow reapir it with this lenovo tool, I wish it will help.
Click to expand...
Click to collapse
It's should work since it's an official tool, any news tell us. Good lucky buddy.
Lenovo tool does not work although my model exists its: G9 plus XT2087-2 error that appears: Unable to match tche appropriate firmware. Some key information cannot be read from the device. You can find my stock room here:
https://mirrors.lolinet.com/firmware/moto/odessa/official/. Its RETEU or RETEU_PL version: XT2087-2_ODESSA_RETEU_10_QPA30.19-Q3-32-50_subsidy-DEFAULT. I am from Poland, so it could be RETEU_PL. How can I install this stock room if the lenovo tool doesn't work?
taboelephant said:
Lenovo tool does not work although my model exists its: G9 plus XT2087-2 error that appears: Unable to match tche appropriate firmware. Some key information cannot be read from the device. You can find my stock room here:
https://mirrors.lolinet.com/firmware/moto/odessa/official/. Its RETEU or RETEU_PL version: XT2087-2_ODESSA_RETEU_10_QPA30.19-Q3-32-50_subsidy-DEFAULT. I am from Poland, so it could be RETEU_PL. How can I install this stock room if the lenovo tool doesn't work?
Click to expand...
Click to collapse
So, I've a code that I use on my Linux box, it should work in windows too, but all of your stock rom ( bootloader.img ; got.bin; recovery.img ; etc ) must be in the same folder as fastboot.exe
Here's the code
Spoiler
fastboot --set-active=a
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot flash radio_a radio.img
fastboot flash radio_b radio.img
fastboot flash bluetooth_a BTFM.bin
fastboot flash bluetooth_b BTFM.bin
fastboot flash dsp_a dspso.bin
fastboot flash dsp_b dspso.bin
fastboot flash logo_a logo.bin
fastboot flash logo_b logo.bin
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot erase carrier
fastboot erase userdata
fastboot erase metadata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot reboot
MrZeroXD said:
So, I've a code that I use on my Linux box, it should work in windows too, but all of your stock rom ( bootloader.img ; got.bin; recovery.img ; etc ) must be in the same folder as fastboot.exe
Here's the code
Spoiler
fastboot --set-active=a
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot flash radio_a radio.img
fastboot flash radio_b radio.img
fastboot flash bluetooth_a BTFM.bin
fastboot flash bluetooth_b BTFM.bin
fastboot flash dsp_a dspso.bin
fastboot flash dsp_b dspso.bin
fastboot flash logo_a logo.bin
fastboot flash logo_b logo.bin
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash recovery_a recovery.img
fastboot flash recovery_b recovery.img
fastboot flash super super.img_sparsechunk.0
fastboot flash super super.img_sparsechunk.1
fastboot flash super super.img_sparsechunk.2
fastboot flash super super.img_sparsechunk.3
fastboot flash super super.img_sparsechunk.4
fastboot flash super super.img_sparsechunk.5
fastboot flash super super.img_sparsechunk.6
fastboot flash super super.img_sparsechunk.7
fastboot flash super super.img_sparsechunk.8
fastboot erase carrier
fastboot erase userdata
fastboot erase metadata
fastboot erase ddr
fastboot oem fb_mode_clear
fastboot reboot
Click to expand...
Click to collapse
Room that I will download should I unpack to adb folder or where? Is it safe to install it yourself or is it better to go to a local phone repairer? It may be hard to find someone who knows what to do.
taboelephant said:
Room that I will download should I unpack to adb folder or where? Is it safe to install it yourself or is it better to go to a local phone repairer? It may be hard to find someone who knows what to do.
Click to expand...
Click to collapse
Yeah, as I said, u need to unpack it to the folder where you see the ' fastboot.exe ' file, and then copy all the spoiler commands I sent, put the phone in fastboot mode, and open the cmd in the folder where fastboot.exe and your extracted rom is, then paste and run the spoiler commands and you're good to go, remember that it'll take a while since it'll re-flash all your system.
MrZeroXD said:
Yeah, as I said, u need to unpack it to the folder where you see the ' fastboot.exe ' file, and then copy all the spoiler commands I sent, put the phone in fastboot mode, and open the cmd in the folder where fastboot.exe and your extracted rom is, then paste and run the spoiler commands and you're good to go, remember that it'll take a while since it'll re-flash all your system.
Click to expand...
Click to collapse
Ok I will try this method in the evening when I have free time, thank you for your help and sorry for my lack of knowledge. I'm also afraid that when I install the wrong room, usb debugging will turn off, although the theoretical version number is correct.
taboelephant said:
Ok I will try this method in the evening when I have free time, thank you for your help and sorry for my lack of knowledge. I'm also afraid that when I install the wrong room, usb debugging will turn off, although the theoretical version number is correct.
Click to expand...
Click to collapse
No prob, we're all learning, and all you need to fix a device that doesn't boot, is an unlocked bootloader, since u can re-flash, I did this on a few devices ( moto x4 ; moto G5s ; moto g9+ ) and succeeded on repairing those...
I want to specifically thank @Electimon for all his code and help he provided along the way. Although imperfect, this is the first attempt
Hi All, We have tried building lineageos 18.1 for capri. Its not perfect yet but you can try and test this.
Many things are working. 4G LTE for JIO in India tested with calls, internet and sms. Headphone jack isn't working yet. There can be other things not working yet. But as of now, not seriously looking into fixing headphone jack issue. Will work on standardizing the build scripts first. The more we use, the more we can figure out things not working.
In the video I have not shown the about device page for privacy of my mobile number
For ROM developers out there, this isn't a complete working tree to build any ROM. Its still under development
Device Tree: https://github.com/sultanahamer/android_device_motorola_capri/tree/nio_replica
branch: nio_replica
Kernel source: https://github.com/moto-common/android_kernel_motorola_msm-4.19
branch: 12
Instructions to flash: These are a bit different from standard so please follow carefully. These are hybrid to GSI and ROM flash instructions. Don't flash anything else which isn't present in instructions.
Code:
Make sure you are on latest of ur stock Android 11. Booted and the rom is working. Any other android version won't work I guess
Download zip
adb reboot bootloader
fastboot -w
fastboot reboot fastboot
fastboot resize-logical-partition system_a 1073741824
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash product product.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot reboot
Our telegram group: https://t.me/MotoG10Official
sultanahamer said:
I want to specifically thank @Electimon for all his code and help he provided along the way. Although imperfect, this is the first attempt
Hi All, We have tried building lineageos 18.1 for capri. Its not perfect yet but you can try and test this.
Many things are working. 4G LTE for JIO in India tested with calls, internet and sms. Headphone jack isn't working yet. There can be other things not working yet. But as of now, not seriously looking into fixing headphone jack issue. Will work on standardizing the build scripts first. The more we use, the more we can figure out things not working.
In the video I have not shown the about device page for privacy of my mobile number
For ROM developers out there, this isn't a complete working tree to build any ROM. Its still under development
Device Tree: https://github.com/sultanahamer/android_device_motorola_capri/tree/nio_replica
branch: nio_replica
Kernel source: https://github.com/moto-common/android_kernel_motorola_msm-4.19
branch: 12
Instructions to flash: These are a bit different from standard so please follow carefully. These are hybrid to GSI and ROM flash instructions. Don't flash anything else which isn't present in instructions.
Code:
Make sure you are on latest of ur stock Android 11. Booted and the rom is working. Any other android version won't work I guess
Download zip
adb reboot bootloader
fastboot -w
fastboot reboot fastboot
fastboot resize-logical-partition system_a 1073741824
fastboot flash system system.img
fastboot flash system_ext system_ext.img
fastboot flash product product.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system vbmeta_system.img
fastboot reboot
Our telegram group: https://t.me/MotoG10Official
Click to expand...
Click to collapse
thank you for this you are my hero
lassarote said:
thank you for this you are my hero
Click to expand...
Click to collapse
I pass this on to @Electimon
I am so happy. Thank you so much! I hope everything will be alright and we get official. G10 is my main phone and I do not want to get unexpected soft brick. This days when everything is more expensive. The lineage os is essential after market.
We are currently trying out lineageos 19.1 Using it for almost a week now. Will post it if everything feels alright.
!!!!!!!!!!!!!!!!!!!!!!!!!WE ARE NOT RESPONSIBLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE TRYING TO INSTALL THIS ROM!!!!!!!!!!!!!!!!!!!!!!
This ROM has been tested for about a week on two capri devices one from India and other from South America
Loads of thanks to @Electimon for his trees and all his help fixing issues we faced in bringing this ROM
Kernel Source: https://github.com/sultanahamer/android_kernel_motorola_msm-4.19 (forked from electimon)
Manifest: https://github.com/sultanahamer/local_manifests
Not working:
FM Radio
Dual Sim (Will look into this soon) - Looked into it. This is being flaky once enabled. Will need more time to fix this.
Telegram group: https://t.me/MotoG10Official
Flashing instructions:
Code:
Make sure you are on latest of your stock Android 11, Booted and the rom is working.
Download zip and extract it and run the following commands
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot -w
fastboot reboot fastboot
fastboot flash system system.img
# In case the above command fails saying parititon size is not enough then try to resize it with below command
fastboot resize-logical-partition system_a 1073741824 #(run this only if the above command fails and if you are on slot_a else change it to system_b)
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot reboot
thanks for the amazing work on this rom
sultanahamer said:
!!!!!!!!!!!!!!!!!!!!!!!!!WE ARE NOT RESPONSIBLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE TRYING TO INSTALL THIS ROM!!!!!!!!!!!!!!!!!!!!!!
This ROM has been tested for about a week on two capri devices one from India and other from South America
Loads of thanks to @Electimon for his trees and all his help fixing issues we faced in bringing this ROM
Kernel Source: https://github.com/sultanahamer/android_kernel_motorola_msm-4.19 (forked from electimon)
Manifest: https://github.com/sultanahamer/local_manifests
Not working:
FM Radio
Dual Sim (Will look into this soon)
Telegram group: https://t.me/MotoG10Official
Flashing instructions:
Code:
Make sure you are on latest of your stock Android 11, Booted and the rom is working.
Download zip and extract it and run the following commands
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot -w
fastboot reboot fastboot
fastboot flash system system.img
# In case the above command fails saying parititon size is not enough then try to resize it with below command
fastboot resize-logical-partition system_a 1073741824 #(run this only if the above command fails and if you are on slot_a else change it to system_b)
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot reboot
Click to expand...
Click to collapse
Thank you, guys, for your awesome work. Hope we'll get a stable update. Good luck
sultanahamer said:
!!!!!!!!!!!!!!!!!!!!!!!!!WE ARE NOT RESPONSIBLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE TRYING TO INSTALL THIS ROM!!!!!!!!!!!!!!!!!!!!!!
This ROM has been tested for about a week on two capri devices one from India and other from South America
Loads of thanks to @Electimon for his trees and all his help fixing issues we faced in bringing this ROM
Kernel Source: https://github.com/sultanahamer/android_kernel_motorola_msm-4.19 (forked from electimon)
Manifest: https://github.com/sultanahamer/local_manifests
Not working:
FM Radio
Dual Sim (Will look into this soon)
Telegram group: https://t.me/MotoG10Official
Flashing instructions:
Code:
Make sure you are on latest of your stock Android 11, Booted and the rom is working.
Download zip and extract it and run the following commands
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot -w
fastboot reboot fastboot
fastboot flash system system.img
# In case the above command fails saying parititon size is not enough then try to resize it with below command
fastboot resize-logical-partition system_a 1073741824 #(run this only if the above command fails and if you are on slot_a else change it to system_b)
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot reboot
Click to expand...
Click to collapse
So installed fine on a G10 now the problem is a lack of google apps I want it and I need magisk for half the apps to to add a custom way to run apps that need root.
I cannot get gapps on it for starters as can't go into a recovery menu it's twrp I need to do all this with and the recovery on this is stock really, I will say though that is is an amazing firmware I mean really clean brilliant work but I must have twrp so I can root but also so I can add google apps which is my primary necessity root is a distant second if at all needed i do newed my apps to make images and other tools I use it for daily driver wise.
l Tried to use this TWRP https://cloudhazy.com/download/motorola-moto-g10-xt2127-2-twrp-recovery-3-5-2/ and it fails but I know the model number XT2127-2 is correct so it just doesn't allow installing or launching it, from inside platform tools openeing in a command window here mode????
I am stuck completely now.
@PHYSC-1 you should be able to find magisk inside the attached lineageos zip. Flash that to boot and you should be rooted. I am working on gapps and dual sim currently. Also, don't feel like you are stuck. At any moment, you can flash the stock firmware and go back to stock if you are not able to daily drive lineage os without gapps.
I don't want to have gapps on my phone so I didn't work on it at all until now. I see that many people are asking for gapps, so giving it a try.
In case you don't find the magisk boot image in the lineage os zip, you can create one yourself by installing magisk app and passing this lineageos boot image to it.
@PHYSC-1 we are testing gapps on this ROM now. Me and two users present on our group are testing GAPPS on this ROM. As of now, its running smooth, will publish the update in a week or so.
sultanahamer said:
!!!!!!!!!!!!!!!!!!!!!!!!!WE ARE NOT RESPONSIBLE FOR ANYTHING THAT MIGHT HAPPEN TO YOUR DEVICE TRYING TO INSTALL THIS ROM!!!!!!!!!!!!!!!!!!!!!!
This ROM has been tested for about a week on two capri devices one from India and other from South America
Loads of thanks to @Electimon for his trees and all his help fixing issues we faced in bringing this ROM
Kernel Source: https://github.com/sultanahamer/android_kernel_motorola_msm-4.19 (forked from electimon)
Manifest: https://github.com/sultanahamer/local_manifests
Not working:
FM Radio
Dual Sim (Will look into this soon) - Looked into it. This is being flaky once enabled. Will need more time to fix this.
Telegram group: https://t.me/MotoG10Official
Flashing instructions:
Code:
Make sure you are on latest of your stock Android 11, Booted and the rom is working.
Download zip and extract it and run the following commands
adb reboot bootloader
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash vendor_boot vendor_boot.img
fastboot -w
fastboot reboot fastboot
fastboot flash system system.img
# In case the above command fails saying parititon size is not enough then try to resize it with below command
fastboot resize-logical-partition system_a 1073741824 #(run this only if the above command fails and if you are on slot_a else change it to system_b)
fastboot flash system_ext system_ext.img
fastboot flash vendor vendor.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
fastboot flash vbmeta_system vbmeta_system.img
fastboot reboot
Click to expand...
Click to collapse
Thank you for this work! I'm also anxious to get a stable, dual chip working version too.
I think the Gapps should be separate to ROM. Of course if it is possible.
Gapps works 2 problems found in testing 1 is a big one for anyone using screen cast the network auto switches from 2.4ghz to 5ghz and back intermittently causing screen cast to drop out mid use and this stuns it and creates constant bad image quality and freezing completely up.
Secondly this could be unrelated to the OS but it doesn't happen on official Motorola OS's when using the app from F-Droid called simple gallery pro if you edit an image and try to draw on an image the drawing occurs in the wrong position the pointer is below where you draw on?