{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specifications:
Xiaomi Hongmi 1S Red Rice MSM8228 Quad Core 1.6GHz 1G Ram 8G Rom 4.7 Inch HD Screen 3G WCDMA
- Qualcomm Snapdragon MSM8228 Quad Core 1.6GHz
- 4.7 inch 1280 * 720 Pixel HD IPS Screen
- 1GB RAM + 8GB ROM
- 8.0MP Rear Camera + 1.6MP Front Camera
- Support 3G WCDMA Network, GPS, WIFI, Bluetooth, etc
Tested With Windows 7
1. Restore Stock Rom with MiFlash
2. Root
3. Update Ota Stable (JHCCNBD24) Rom And Ota Stable (JHCCNBF31 Rom
4. install Touch TWRP Recovery 2.7.1 And Touch CWM Recovery v6.0.3.6
5. WSM Manager and XExtStorage
6. Extra
7. Cyanogenmod 11 Rom
8. Xposed installer and modules
9. Full Backup TWRP Recovery / Backup and Restore only apps +data/ Backup and Restore only IMEI
10. Anti -Theft
Tread updated 16/11/2014
--------------------------------------------------------------------------------------------------------------------------------------------------------
I am not responsible for any damage on your phone !
---------------------------------------------------------------------------------------------------------------------------------------------------------
1. Restore Stock Multi Lang Miui v5 Rom (JHCCNBD23) 531 Mb With MiFlash
Link: http://www.mediafire.com/download/ex1ggyxmrctr99x/armani_images_JHCCNBD23.0_4.3_340628b41f.tgz
MiFlash
Link: http://www.mediafire.com/?v8k67vsb9a62xks
Unzip JHCCNBD23 Rom
Install Miflash ,Connect phone in Fastboot to pc
Run as Administrator MiFlash klik Refresh you will see your phone is connected (See picture) and Navigate to armani_images_JHCCNBD23.0_4.3 Folder and Flash Phone.
Takes about 2 to 3 min.
----------------------------------------------------------------------------------------------------------------------------------------------------------
2. Root
Download the RootHM1SW.zip and install with update app.
Link: http://www.mediafire.com/download/bxei26g0645v6ru/Root+HM1SW.zip
----------------------------------------------------------------------------------------------------------------------------------------------------------
3. Update OTA
Update Ota Multi Lang stable (JHCCNBD24)365 Mb
Update Ota Multi Lang Stable (JHCCNBF31) 410 Mb
backup your phone before installing the update
Download and install Rom with update app or Fresh install
(JHCCNBD24) Link: http://www.mediafire.com/download/b...ani_mam_JHCCNBD24.0_24.0.0_41880f3302_4.3.zip
(JHCCNBF31) Link: https://www.mediafire.com/?60p28a8g6678jw9
On (JHCCNBF31) Backup app is Missing.
Delete With Root Explorer in System/app The ( Backup.app only) And and copy the downloaded Backup app in System/app and Reboot Phone.
Backup app Link: http://www.mediafire.com/download/jpuylktd11azdy5/Backup.apk
it is best not to remove the SDCard from the phone
----------------------------------------------------------------------------------------------------------------------------------------------------------
4. TWRP Recovery 2.7.1 ( See Picture )
Thanks to juliusssss !!
Download Tool For Fasboot on (Thread)
Go in Fastboot with phone connect to pc
unzip Cambio_Recovery_Redmi1S_TWRP_juliusssss_MiRecovery_20140705.7z
Run (administator) the Cambiar_Recoverys_Redmi1S.bat and select
Number 1. = (TWRP Touch Recovery) Press enter.
Number 2. = (TWRP Stock Recovey)
After flashing Recovery discconect and Reboot phone.
Translated Note of Thread:
If you are an official rom, we can certainly be installed / system / etc / install-recovery.sh file that cause us to re-install the official Mirecovery the RM restart. For this we need to install first to prevent root delete the file with root explorer.
Thread: http://foro.miui.es/index.php?topic=8614.0
----------------------------------------------------------------------------------------------------------------------------------------------------------
CWM Recovery v6.0.3.6 ( See Picture )
Thanks to brainfog !!
if you have already flashed TWRP Recovery and want to flash CWM Recovery
Download signed_cwm_update.zip to SDCard
Install with update app or
in Recovery install signed_cwm_update.zip
With stock Recovery:
download signed_cwm_update.zip to pc Rename signed_cwm_update.zip to update.zip
Connect phone to pc and copy update.zip to root of Internal storage go with phone in recovery and select Install update.zip to System.
Source Thread:https://techpunked.wordpress.com/2014/07/08/cwm-touch-recovery-v6-0-3-6-for-redmi-1s-wcdma/
CWM Recovery Link: https://mega.co.nz/#!RQkVAIDB!OWecFNTcKm9vufDhk0vGX9K3vsL10Djf9YuCFKS7Wg0
Restore Stock Recovery Link: https://mega.co.nz/#!EElW0QIZ!3frRQB8iEvjTpuf6XTBtbA5SxCo0FEBvLVSqiWZQaXY
Boot into recovery is faster with CWM Recovery v6.0.3.6
----------------------------------------------------------------------------------------------------------------------------------------------------------
5. WSM Manager
Reboot,EXxtStorage options and much more....
Download on thread
Install WSM manager
Root Permission
install Xposed
The Phone will Restart.
Thread: http://forum.xda-developers.com/showthread.php?t=2481178
----------------------------------------------------------------------------------------------------------------------------------------------------------
XExtStorage
install XextStorage
open XExtStorage and set
Primary SDCard 1
Secondary SDCard 0
(see picture)
Enable XExtStorage in WSM manager
Copy Android Folder from internal storage to SDCard !
Reboot Phone.
Link: http://www.mediafire.com/download/jlj4c48t1c4c2ay/XExtStorage.apk
----------------------------------------------------------------------------------------------------------------------------------------------------------
6. Google Camera
From Thread: http://forum.xda-developers.com/showthread.php?t=2341080
Link : https://www.dropbox.com/s/l2at3wzy8t5st3m/Gallery.apk
----------------------------------------------------------------------------------------------------------------------------------------------------------
Android L Keyboard
Just install
Link: http://www.apkmirror.com/apk/google-inc/google-keyboard/google-keyboard-4-0-21173-1568296-apk/
-----------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube 4.4.11
Tread: http://forum.xda-developers.com/showthread.php?t=1529715
----------------------------------------------------------------------------------------------------------------------------------------------------------
Lenovo Calendar
Link : https://www.mediafire.com/?2btogoz6dhrgl1z
----------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube Downloader v4.3
Tread: http://forum.xda-developers.com/showthread.php?t=2137743
-----------------------------------------------------------------------------------------------------------------------------------------------------------
7. Stable Multi Lang Cyanogenmod 11 R3 Rom 230Mb ******
Thanks to , Kra1o5,fefifofum,Tarun93, MAITREYA
Rom Pictures
Link: https://mega.co.nz/#F!AItk3C4J!ED70gSDJG38YOMEAzxjE3A
Install in TWRP Or CWM Recovery
Wipe data,cache and dalvik cache.
Flash Rom
Flash GApps.zip
Thread http://thebroodle.com/xiaomi/redmi-1s/cm11-stable-xiaomi-redmi-1s-android-4-4-4-kitkat-bugless-rom/
Link Rom https://s.basketbuild.com/filedl/de...i/armani/cm-11-20140920-UNOFFICIAL-armani.zip
Download GApps.zip from link on Thread
How to enable Developer settings
1. Select settings
2. Select about phone
3. tab 7 times on build-Number
----------------------------------------------------------------------------------------------------------------------------------------------------------
8. Xposed Installer
Install Xposed Installer
And you can install Modules to Customize your phone
Link: http://repo.xposed.info
Modules ( Tweaks )
-Download2SD Download location on Sdcard ( Tested )
http://dl-count.xposed.info/modules/..._v9_acf08f.apk
-NoSafeVolumeWarning No Warning Volume( Not Tested )
http://dl.xposed.info/modules/com.py...6_485a40_0.apk
-SMS Xposed Wake on sms and Flash Flashlight ( Not Tested )
http://dl-xda.xposed.info/modules/co...v11_85cb23.apk
-AlternateAppPicker Select Default app ( Not Tested )
http://dl-xda.xposed.info/modules/pk..._v3_6c8c0f.apk
Extra
-Smart Network Network options ( Not Tested )
http://dl-xda.xposed.info/modules/ma...123_4c575d.apk
-Gravitybox customize phone: Physical Go to sleep button, quickunlock,Torch and much More settings ( Tested )
http://dl.xposed.info/modules/com.ce...111_70a4b6.apk
-XCoolDroid v1.0 Resize of your Google keyboard ( Not Tested )
http://forum.xda-developers.com/atta...0&d=1410005819
-Chromepie Fast settings module for Google Chrome( Not Tested )
http://dl.xposed.info/modules/com.jt..._v2_2c7b0d.apk
-Advanced Power Menu Soft Reboot option and more ( Tested )
http://dl-xda.xposed.info/modules/hk...v33_2b5ca5.apk
-Battery Thermeing HDPI Statusbar Battery ( Not Tested )
http://forum.xda-developers.com/xpos...meing-t2407727
--------------------------------------------------------------------------------------------------------------------------------------------------------
9. Full Backup Rom
1. With CWM Recovery
Boot in Recovery With a Rebooter app
Select in CWM Recovery backup and restore
Select Backup
The Easyt Way
This step only once
Install Rom Manager
Select Recovery Setup
Select Below (Clockworkmode Recovery)
Select below ( Device Not Listed Above)
Select 3.x+
Select OK
Then
Select Backup Current Rom
Location Backup Folder
sdcard1/clockworkmod
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Backup only apps+data to restore in a different Rom
Download Helium Premium
select apps (not system apps)
Disable (Small Backup)
select backup
select Save on sdcard
Location Backup Folder sdcard/carbon Folderr
Link : http://www33.zippyshare.com/d/122513...PK4Fun.com.apk
Helium Tool Pc/Mac/Linux
Link: https://www.clockworkmod.com/carbon
Resore only apps+data
Install and open Helium Premium
Select Restore backup
Select apps
Select Restore
----------------------------------------------------------------------------------------------------------------------------------------------------------
Backup IMEI
Install Mobileuncle MTK Tool
Select IMEI Backup Restore (MTK)
Select Backup IMEI to SDCARD2(MTK)
Location - SDCARD/IMEI.bak
Restore IMEI in a different Rom
Copy the IMEI.bak to SDCARD
Select IMEI Backup Restore (MTK)
Select Restore IMEI to SDCARD2(MTK)
Select Ok
Reboot Phone Ok
Link: https://play.google.com/store/apps/d...euncle.toolbox
---------------------------------------------------------------------------------------------------------------
Easy Phone Tunes
Synchronize music from Itunes to Internal /Sdcard on phone
Install Easy phone Tunes from Playstore
Install SetupEasyPhoneTunes Windows
or
Install SetupEasyPhoneTunes Mac
Connect PC/MAC - Phone (MTP)
Select Settings
Select Storage
Select
App: https://play.google.com/store/apps/d...es.android.app
Windows
http://f0da7f376559b2016640-1cc6f615...E]oneTunes.exe
----------------------------------------------------------------------------------------------------------------------------------------------------------
10. Anti -Theft
Thanks to leducbao
Theftie Find My Phone
As Root System app
Download Theftie to phone
Go with Root Explorer To system/app
Mount R/W
Copy Theftie.apk to The folder
Set root premision to "0644"
Mount R/W
Reboot Phone
Enable Theftie in Xposed
If you install Theftie as system app can then secured to restore Settings -factory Reset - lock, wipe, sdcard remotely.
Link: http://forum.xda-developers.com/andr...phone-t2802092
Instuctions: http://www.theftie.net/manual
Find your phone: http://www.theftie.net
----------------------------------------------------------------------------------------------------------------------------------------------------------
Easy Phone Tunes
Synchronize music from Itunes to Internal /Sdcard on phone
Install Easy phone Tunes from Playstore
Install SetupEasyPhoneTunes Windows
or
Install SetupEasyPhoneTunes Mac
Connect PC/MAC - Phone (MTP)
Select Settings
Select Storage
Select
App: https://play.google.com/store/apps/details?id=com.easyphonetunes.android.app
Windows
http://f0da7f376559b2016640-1cc6f61...a.r34.cf3.rackcdn.com/SetupEasyPhoneTunes.exe
@77777777777777
You have done amazing job here Thank!!
I'm using stock Rom Stable 24.0.0 Rom + Rooted running beautiful!!..
Now I can't wait for custom Rom for our Redmi 1S:good:
Thanks !
Sent from my HM 1SW using XDA Premium 4 mobile app
On miui.su available version 31.0 (JHCCNBF31.0)
---------- Post added at 12:25 AM ---------- Previous post was at 12:07 AM ----------
In title error: right name "Redmi 1S", not "Redmi S1"
Thanks overlooked !
Sent from my HM 1SW using XDA Premium 4 mobile app
Official TWRP recovery 2.7.1.0
77777777777777 said:
4. TWRP Recovery 2.7.1 ( See Picture )
Thanks to juliusssss !!
Go in Fastboot with phone connect to pc
unzip Cambio_Recovery_Redmi1S_TWRP_juliusssss_MiRecovery _20140705.7z
Run (administator) the Cambiar_Recoverys_Redmi1S.bat and select
Number 1. = (TWRP Touch Recovery) Press enter.
Number 2. = (TWRP Stock Recovey)
After flashing Recovery discconect and Reboot phone.
Tread: http://foro.miui.es/index.php?topic=8614.0
Link https://www.copy.com/s/0n8u9amfhdG4/...ry_20140705.7z
Click to expand...
Click to collapse
Also TWRP recovery 2.7.1.0 Official by Dev (Dees_Troy) and ( DarkNightmare)
http://en.miui.com/thread-29291-1-1.html
Anybody successfully install it?
Redmi 1S Fastboot Stock Rom / Unbrick
Hi every one following link contains all stock version of redmi 1s Rom choose the latest rom AND use MiFlash tool.
ROM Link en.miui.com/thread-21812-1-1.html
MiFlash Tool link bigota.d.miui.com/tools/MiPhone20140509.exe
please use http:\\ before the above links as xda not allowing to post outside links and roms are not surely indian edition. but english language option comes in boot
Nice share...
just subscribe this thread
Redmi 1S Fastboot Stock Rom / Unbrick
Use Latest redmi 1s Rom link is http://bigota.d.miui.com/JHCCNBF36.0/armani_images_JHCCNBF36.0_4.3_cn_5360473a1c.tgz
No Need of Using OTA Roms in between till the latest one arrives
and the following link contains many Recovery and Fastboot rom
http://en.miui.com/forum.php?mod=viewthread&tid=21812&highlight=fastboot+redmi+1s
77777777777777 said:
1. Restore Stock Rom with MiFlash
2. Root
3. Update Ota Stable (JHCCNBD24) Rom And Ota Stable (JHCCNBF31 Rom
4. install Touch TWRP Recovery 2.7.1 And Touch CWM Recovery v6.0.3.6
5. WSM Manager and XExtStorage
6. Extra
7. How to Manual flash Recovery.img (ADB-Fastboot for Windows) [/B]
Tread updated 04/09/2014
1. Restore Stock Multi Lang Miui v5 Rom (JHCCNBD23) 531 Mb With MiFlash
Link: http://www.mediafire.com/download/ex1ggyxmrctr99x/armani_images_JHCCNBD23.0_4.3_340628b41f.tgz
MiFlash
Link: http://www.mediafire.com/?v8k67vsb9a62xks
Unzip JHCCNBD23 Rom
Install Miflash ,Connect phone in Fastboot to pc
Run as Administrator MiFlash klik Refresh you will see your phone is connected (See picture) and Navigate to armani_images_JHCCNBD23.0_4.3 Folder and Flash Phone.
Takes about 2 to 3 min.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
2. Root
Download the RootHM1SW.zip and install with update app.
Link: http://www.mediafire.com/download/bxei26g0645v6ru/Root+HM1SW.zip
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
3. Update Ota Multi Lang stable (JHCCNBD24) 365 Mb
Update Ota Multi Lang Stable (JHCCNBF31) 410 Mb
backup your phone before installing the update
Download and install Rom with update app or Fresh install
(JHCCNBD24) Link: http://www.mediafire.com/download/b...ani_mam_JHCCNBD24.0_24.0.0_41880f3302_4.3.zip
(JHCCNBF31) Link: https://www.mediafire.com/?60p28a8g6678jw9
On (JHCCNBF31) Backup app is Missing.
Delete With Root Explorer in System/app The ( Backup.app only) And and copy the downloaded Backup app in System/app and Reboot Phone.
Backup app Link: http://www.mediafire.com/download/jpuylktd11azdy5/Backup.apk
it is best not to remove the SDCard from the phone
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
4. TWRP Recovery 2.7.1 ( See Picture )
Thanks to juliusssss !!
Download Tool For Fasboot on (Thread)
Go in Fastboot with phone connect to pc
unzip Cambio_Recovery_Redmi1S_TWRP_juliusssss_MiRecovery_20140705.7z
Run (administator) the Cambiar_Recoverys_Redmi1S.bat and select
Number 1. = (TWRP Touch Recovery) Press enter.
Number 2. = (TWRP Stock Recovey)
After flashing Recovery discconect and Reboot phone.
Translated Note of Thread:
If you are an official rom, we can certainly be installed / system / etc / install-recovery.sh file that cause us to re-install the official Mirecovery the RM restart. For this we need to install first to prevent root delete the file with root explorer.
Thread: http://foro.miui.es/index.php?topic=8614.0
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
CWM Recovery v6.0.3.6 ( See Picture )
Thanks to brainfog !!
if you have already flashed TWRP Recovery and want to flash CWM Recovery
Download signed_cwm_update.zip to SDCard
Install with update app or
in Recovery install signed_cwm_update.zip
With stock Recovery:
download signed_cwm_update.zip to pc Rename signed_cwm_update.zip to update.zip
Connect phone to pc and copy update.zip to root of Internal storage go with phone in recovery and select Install update.zip to System.
Source Thread:https://techpunked.wordpress.com/2014/07/08/cwm-touch-recovery-v6-0-3-6-for-redmi-1s-wcdma/
CWM Recovery Link: https://mega.co.nz/#!RQkVAIDB!OWecFNTcKm9vufDhk0vGX9K3vsL10Djf9YuCFKS7Wg0
Restore Stock Recovery Link: https://mega.co.nz/#!EElW0QIZ!3frRQB8iEvjTpuf6XTBtbA5SxCo0FEBvLVSqiWZQaXY
Boot into recovery is faster with CWM Recovery v6.0.3.6
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
5. WSM Manager
Reboot,EXxtStorage options and much more....
Download on thread
Install WSM manager
Root Permission
install Xposed
The Phone will Restart.
Thread: http://forum.xda-developers.com/showthread.php?t=2481178
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
XExtStorage
install XextStorage
open XExtStorage and set
Primary SDCard1
Secondary SDCard0
(see picture)
Enable XExtStorage in WSM manager
Copy Android Folder from internal storage to SDCard !
Reboot Phone.
Link: http://www.mediafire.com/download/jlj4c48t1c4c2ay/XExtStorage.apk
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
-----------------
6. Google Camera
From Thread: http://forum.xda-developers.com/showthread.php?t=2341080
Link : https://www.dropbox.com/s/l2at3wzy8t5st3m/Gallery.apk
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Google Keyboard (AOSP) 4.4
All language settings
Just install
Do NOT copy it in system/app !
if you want you can remove the stock keyboard !
backup app always recommended !
Link: http://www.mediafire.com/?2qer4ys05hfpnyu
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube 4.4.11
Tread: http://forum.xda-developers.com/showthread.php?t=1529715
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
YouTube Downloader v4.3
Tread: http://forum.xda-developers.com/showthread.php?t=2137743
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
7. How to Manual flash Recovery.img (ADB-Fastboot for Windows)
Create a folder in
Hard-drive C: (folder-name)
----Android-----
Copy the recovery.img file in C: Android folder
Connect Phone in Fastboot to pc
Option 1.
Open as Administrator Command promp :
(Windows 7 ,Open the Start Menu, type cmd in the search box and press Enter)
Option 2.
Run as an Administrator the START.cmd file
Type:
cd \Android
Thrust Enter
c:\Android>fastboot flash recovery recovery.img
Thrust Enter
Manual reboot phone
Link: http://www.mediafire.com/?8c5r3xmh71i6k62
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
All about Redmi 1s rooting, custom rom installation, upgrading to kitkat
Mokee ROM For Xiaomi Redmi 1S - Android
4.4.4 Indian version
http://forum.xda-developers.com/android/general/mokee-rom-xiaomi-redmi-1s-android-4-4-4-t2886275
custom cyanogenmod android 4.4 ROM for
redmi 1S with preinstalled xposed framework
http://forum.xda-developers.com/android/general/custom-cyanogenmod-android-4-4-rom-t2888971
Custom rom xiaomi redmi 1s indian
version
http://forum.xda-developers.com/android/general/custom-rom-xiaomi-redmi-1s-indian-t2882604
Unbrick Redmi 1s unbrick (indian version)
rooting, installing CWM & custom ROM guide
http://forum.xda-developers.com/android/general/redmi-1sindian-version-unbricking-t2882369
Root redmi 1S (Indian version) with
SuperSU installed (No native root method)
http://forum.xda-developers.com/android/general/root-redmi-1s-indian-version-supersu-t2881416
Handy topic. But i would advice people not to install TWRP or CWM but instead just load it once needed with fastboot.
Because it might still have some problems and once it goes wrong, your device will be bricked.
I am not sure how far the development is for armani regarding TWRP and CWM, I've been using the beta version of CWM without problems howsoever.
NiTrOwow said:
Handy topic. But i would advice people not to install TWRP or CWM but instead just load it once needed with fastboot.
Because it might still have some problems and once it goes wrong, your device will be bricked.
I am not sure how far the development is for armani regarding TWRP and CWM, I've been using the beta version of CWM without problems howsoever.
Click to expand...
Click to collapse
i agreed. I almost bricked my armani, using twrp trying to update mokee n then it failed. reverting back to stock I got my touchscreen not working:silly: now im happy with stock rooted armani with all chinese bloatware removed
Friend i got this version
Kernel - 3.10.84
Build - MRA58K
Software - V20h-EUR-XX
And i like to root to use a software to recovery video i delete.
Can you indicated the best root for my version
Thanks
I am on v20h EUR like you and I have successfully done the root by this: https://forum.xda-developers.com/g4/general/howto-complete-guide-to-unlock-twrp-t3370003
And unlocking the bootloader will erase all your data - just in case you don't know it
Steps to root
1. Unlock bootloader with
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryId=CTULRS0702
2. Download
https://dl.twrp.me/h815/twrp-3.0.2-1-h815.img.html
3. Download and unzip -- android-studio-ide-145.3537739-windows.zip
https://developer.android.com/studio/index.html#downloads
4. Download
https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
put this on the root of sdcard of the phone
5. If you unzip on C:\
go to c:\android-studio\bin\ and run studio64.exe
skip the install, then pres configure in the right bottom - SDK Management
pres on- Android SDK Location
create an folder on c:\sdk and next
you have now c:\sdk\platform-tools\
6. Copy the twrp-3.0.2-1-h815.img to c:\sdk\platform-tools\
7. Opend an CMD and type
cd /d c:\sdk\platform-tools\
-Put your phone in download (fastboot) mode with ( you must have USB debugging on )
adb reboot bootloader
fastboot boot twrp-3.0.2-1-h815.img
8. on twrp
Install button, select storage and select internal on micro SDCARD (the location of the SuperSU-v2.79-201612051815.zip)
select SuperSU-v2.79-201612051815.zip install and then reboot
9. now you must have root
Thanks for all replay
So anyone now a program to recovery video files? And dont need root the mobile?
This video is very important
Thanks
If you still use that phone, and some apps write on SDCard or on location of the movie, you are with no luck.
The index of the file is deleted and the rest of the file is declared as free, and it well be used as such.
If you dot use that phone, you can try this
1. https://play.google.com/store/apps/details?id=fahrbot.apps.undelete
2. Wondershare Dr.Fone for Android – $49.95
3. MyJad Android Data Recovery
Big thanks to ghepardus!!! i finally succeeded to root my LG G4!! This root tutorial is working fine!
With twrp you can root with the fabulous SimpleGX kernel (previous version v2.0.3 with the classical superSU ) !!!
Best battery life +fiops scheduler(best balanced !) + westwood tcp manager
ghepardus said:
Steps to root
1. Unlock bootloader with
http://developer.lge.com/resource/mobile/RetrieveBootloader.dev?categoryId=CTULRS0702
2. Download
https://dl.twrp.me/h815/twrp-3.0.2-1-h815.img.html
3. Download and unzip -- android-studio-ide-145.3537739-windows.zip
https://developer.android.com/studio/index.html#downloads
4. Download
https://s3-us-west-2.amazonaws.com/supersu/download/zip/SuperSU-v2.79-201612051815.zip
put this on the root of sdcard of the phone
5. If you unzip on C:\
go to c:\android-studio\bin\ and run studio64.exe
skip the install, then pres configure in the right bottom - SDK Management
pres on- Android SDK Location
create an folder on c:\sdk and next
you have now c:\sdk\platform-tools\
6. Copy the twrp-3.0.2-1-h815.img to c:\sdk\platform-tools\
7. Opend an CMD and type
cd /d c:\sdk\platform-tools\
-Put your phone in download (fastboot) mode with ( you must have USB debugging on )
adb reboot bootloader
fastboot boot twrp-3.0.2-1-h815.img
8. on twrp
Install button, select storage and select internal on micro SDCARD (the location of the SuperSU-v2.79-201612051815.zip)
select SuperSU-v2.79-201612051815.zip install and then reboot
9. now you must have root
Click to expand...
Click to collapse
Hi same step for v20p version?
jurastefo said:
Hi same step for v20p version?
Click to expand...
Click to collapse
It is univeral way to root v20+ on phone with unlock bootloader
## first version , errors may still occur
Hi everybody, as a noob in the rooting world , here is my small contribution. A step by step how-to , to completely root + installing a custom.
DO NOT HESITATE TO COMMENT SO I CAN IMPROVE THE DOC:
=======================================================================
Read the complete procedure carefully before start: Beware you will loose all data you may have on the phone .and you will loose warranty .
## REQUIREMENTS :a brand new redmi note 9T (direct from the store, no modifications), a pc with windows , the usb cable to link the pc to the phone.
A sdcard where you can store the rom and some zip to put in your phone
Make sure the pc is up ot date with latest android usb driver and adb available :
usb drivers here : https://developer.android.com/studio/run/win-usb
adb software : https://www.xda-developers.com/install-adb-windows-macos-linux/
we also need 7zip https://www.7-zip.org/
Also try to update your phone with the latest MIUI version you can get (at the the time I'm writing this it should be MIUI 12.5, based on android 11).
To upgrade go to system/about phone/ tap on the MIUI logo/ check for update .
If your phone is still stuck to a lower version, you may trick it by changing the region (I choose hong kong) in system/additional settings/region
then try to check for MIUI update again.
## FIRST STEP : unlock the booloader .for this you need a xiaomi account (if you created one with your phone , use it)
You also need to enable developper mode in your phone , so you can access usb debuging . (see the video tutorial)
a video tutoriel here :
you will probably have to wait 168 hours before you can unlock the phone (Yes you're not alone to think it's annoying, do not hesitate to complain to xiaomi business department)
there is also this version of the unlocker (to bypass the wait time), but I have not tested it
Moreover the bypass works for devices not yet linked to mi account
Download MiUnlock_bypass_OTP.zip - Generic
Download file MiUnlock_bypass_OTP.zip - Generic - in MiFirm ✅ - Xiaomi MIUI Firmware - ROM - TWRP download free and max speed - The biggest Xiaomi Mi download
mifirm.net
Once your bootloader unlock you phone will be reseted and when you restart it you will be asked for the xiaomi account password again (and you need a network connection).
After completing the setup again, don't forget to reactivate usb debuging option .
### SECOND STEP download and save files
In case your want to rollback, and also if your want to install magisk in some custom rom , you need to download the original MIUI rom here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
from the zip file , you need to extract the boot.img file and transfer the file on your phone
then the install on your phone the magisk apk file : https://magiskapp.com/#magisk-app-apk
run the magisk app , choose install magisk , select patch a file and choose the boot.img file then press the let's go button
Magisk will generate a patched_image_file in your download folder .
copy the patched image file to your sdcard.
on your phone you can install this : https://play.google.com/store/apps/details?id=tk.hack5.treblecheck
It will help you select the type of rom you need to download
Plug your phone to the computer , open a command shell in your adb fastboot directory and type :
adb devices
you should see something like :
List of devices attached
sceqxxxxxxxxxxk device
(if not check your phone screen ,if there is some grant access dialog)
download orangefox from here https://github.com/gsuzeda/twrp_cannon/releases/
put the vbmeta.zip and OrangeFox-R11.0-Unofficial-cannong.zip on the sdcard
put the recovery.img in the same directory than your adb fastboot program
download the latest magisk files release from here :
first the zip : https://magiskapp.com/zip/#download-now
and the apk file : https://magiskapp.com/#magisk-app-apk
and put them on the sdcard
download the latest of the custom rom you want to install. Based on this link (thank you @gsuzeda) https://docs.google.com/spreadsheets/d/1Nm1RAQ_kiSoSBgtzux8uKklLF9TF6-1QvIVCPzW3OCs/edit#gid=0
, I will try AOSP rom here : https://github.com/phhusson/treble_experimentations/releases/latest
but you can also try lineageOS here : https://sourceforge.net/projects/andyyan-gsi/files/
(if you choose AOSP , you can not install magisk , at least for now)
NOTE: If your choose another custom rom , remember you may also need to install google apps as a separate package .
Example for lineageOS , you can download the gapps (MindtheGapps for arm64 )here https://androidfilehost.com/?fid=2188818919693781601
and copy the file to your sdcard
The redmi note 9T code name is CANNONG . It uses ARM64 A/B IMAGES and we want vndklite (read/write on system)
This is important whatever the custom rom you choose to download and install
Now we prepare the image files from the custom ROM so we can choose between two install methods
METHOD ONE is flashing the system.img from the computer with the phone in fastboot mode plugged to the pc.
METHOD TWO is flashing a zip file with the phone in recovery mode (using the orangefox program or twrp)
I choose his method , because you can do all the operation from orangefox recovery
for method two we will use https://forum.xda-developers.com/attachments/gsi_flasher_sdcard-zip.5183639/
(thank you @gsuzeda for the complete method here https://forum.xda-developers.com/t/...ung-galaxy-a51-super-partition-image.4216083/ )
unzip the gsi flasher somewhere on your PC (for me Mydocument\gsiflasher)
exemple usage with AOSP rom:
uncompress the system-roar-arm64-ab-vndklite-gapps.img.xz
copy the img file in the gsi directory of the gsi flasher and rename it system.img (so for me cp system-roar-arm64-ab-vndklite-gapps.img to Mydocument\gsiflasher\gsi\system.img).
then create a zip file with the 3 directories (gsi, META-INF, scripts) in Mydocument\gsiflasher using 7 zip , for example system-roar-arm64-ab-vndklite-gapps.zip.
And finally copy this zip to the root of your sdcard .
## THIRD STEP : install orangefoxorangefox is a recovery program like twrp but with more option.
Check if you booloader is unlock in your phone by going to system\additonal settings\developper option\mi unlock status
If the booloader is unlock then you can install recovery orangefox .
Make sure than usb debugging and install via usb is checked in the developper option of your phone
power off your phone and restart your phone in fastboot mode (volume down + power )
plug it to your pc .
open a command shell in the directory were fastboot is installed
write the command :
fastboot devices
it should give you a list with your device
then write the command
fastboot flash recovery recovery.img
once the install complete reboot your phone in recovery mode with the command :
fastboot reboot recovery
once boot in recovery mode you should see the orangefox menu.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Use the "Files" at the bottom at the screen explore to go to the sdcard and tap on the orangefox zip files .
then swipe to install
Once the file installed , the phone should reboot in recovery.
Then use the file explorer to find the vbmeta.zip
ttap the file and swipe to install
after the install the phone should reboot.
a simple check step to see if everything went right
## FOURTH STEP , test and install custom OSThere is two method to install , via recovery or via fastboot
I choose to use orangefox recovery
via recovery
reboot in recovery mode (volume up +power)
Once booted in orangefox recovery
first format the DATA (using the wipe menu,and you need to type yes to confirm )
Then reboot to recovery (from the orangefox menu choose reboot then recovery)
once rebooted in recovery
wipe data cache and dalvik
then with the file menu of orangefox navigate to the root of your sdcard where you stored the system zip we created for example system-roar-arm64-ab-vndklite-gapps.zip.
tap the zip and swipe to install
(if your choose another rom , do the same thing to also intall the gapps zip file)
once the install complete
wipe data cache and dalvik
reboot the phone .
## FIFTH STEP check installyour phone should now start with AOSP version of android and start the setup program.
If you get a message like your device is not play protect certified :
connect your phone to your computer, in a command shell type :
adb root
adb shell
sqlite3 /data/data/com.google.android.gsf/databases/gservices.db
select * from main where name = "android_id";
then copy the id number printed and go there :
Sign in - Google Accounts
and enter the id in the text box and press register
wait 15 minutes and reboot your phone and finish the setup process and connect to google store with your gmail account
If your installation complain about the sd card, choose format as external. (you may have to transfer the files of step one in the card again)
## SIXTH STEP : install magisk(DOES NOT WORK WITH AOSP ROM)
reboot in recovery.
in the orangefox file menu :
search your magisk.zip file on the sdcard , tap and swipe to install.
Then choose the patched_boot_img file and choose /boot to install
Then choose the vbmeta.zip and install
wipe cache and reboot
All you want to know about magisk is here : https://magiskapp.com/
### LAST STEP , secure backnow disable usb debugging
unchecked the option : install app from unknow sources
### ROLLBACKIn case you want to rollback to MIUI rom
go there : https://www.getdroidtips.com/guide-flash-miui-rom-xiaomi-devices/
and follow the chapter : the How to Flash Xiaomi Firmware via TWRP Recovery
## TO DO
improve the magisk part :
adding a list of apps for securing the phone
## TO DO: EXTRA STEP :
how to move back from custom to stock rom
Looks good.
The default PHH GSI Custom Rom has inbuilt root rather than Magisk, which is a bit annoying as you can't get SafetyNet working, so can't use Google Pay (and other apps that require SafetyNet).
You can uninstall the inbuilt root and replace it with Magisk, but it's a bit fiddly (like most things on this phone!), as the Magisk app has an issue finding the Magisk su binary.
You need to be using the vndklite build so you can get write access to the system partition. From a root shell (which will be using the inbuilt root to start with). You need to run this:
Code:
mount -o remount,rw /
echo 'export PATH /sbin:/product/bin:/apex/com.android.runtime/bin:/apex/com.android.art/bin:/system_ext/bin:/system/bin:/system/xbin:/odm/bin:/vendor/bin:/vendor/xbin' >> init.environ.rc
mount -o remount,ro /
Reboot to OrangeFox, and in terminal run this (to remove the inbuilt su):
Code:
mount /system_root
mount -o remount,rw /system_root
touch /system_root/system/phh/secure
umount -l /system_root/system/xbin/su
rm /system_root/system/xbin/su
rm /system_root/system/bin/phh-su
rm /system_root/system/etc/init/su.rc
rm /system_root/system/bin/phh-securize.sh
rm -Rf /system_root/system/{app,priv-app}/me.phh.superuser/
rm -Rf /system_root/data/su
umount /system_root
Download the latest Magisk apk (v23 at time of writing) from https://github.com/topjohnwu/Magisk/releases/download/v23.0/Magisk-v23.0.apk and rename it to Magisk-v23.0.zip. Copy it over to your phone, and install it using OrangeFox (topjohnwu has stated in future Magisk versions the renaming to zip will stop working, but it's good for now).
From memory I think you now need to wipe the data partition again, but it's worth a try without, and see if you bootloop?
Once you're back into the regular system you'll need to install the Magisk app (if you haven't done so already), and then activate MagiskHide, and install the MagiskHide Props Config module. You can then use Google Pay again!
very good, Congratulations!
I added a link in my table that redirects to your post
dsclee1 said:
Looks good.
The default PHH GSI Custom Rom has inbuilt root rather than Magisk, which is a bit annoying as you can't get SafetyNet working, so can't use Google Pay (and other apps that require SafetyNet).
You can uninstall the inbuilt root and replace it with Magisk, but it's a bit fiddly (like most things on this phone!), as the Magisk app has an issue finding the Magisk su binary.
You need to be using the vndklite build so you can get write access to the system partition. From a root shell (which will be using the inbuilt root to start with). You need to run this:
Code:
mount -o remount,rw /
echo 'export PATH /sbin:/product/bin:/apex/com.android.runtime/bin:/apex/com.android.art/bin:/system_ext/bin:/system/bin:/system/xbin:/odm/bin:/vendor/bin:/vendor/xbin' >> init.environ.rc
mount -o remount,ro /
Reboot to OrangeFox, and in terminal run this (to remove the inbuilt su):
Code:
mount /system_root
mount -o remount,rw /system_root
touch /system_root/system/phh/secure
umount -l /system_root/system/xbin/su
rm /system_root/system/xbin/su
rm /system_root/system/bin/phh-su
rm /system_root/system/etc/init/su.rc
rm /system_root/system/bin/phh-securize.sh
rm -Rf /system_root/system/{app,priv-app}/me.phh.superuser/
rm -Rf /system_root/data/su
umount /system_root
Download the latest Magisk apk (v23 at time of writing) from https://github.com/topjohnwu/Magisk/releases/download/v23.0/Magisk-v23.0.apk and rename it to Magisk-v23.0.zip. Copy it over to your phone, and install it using OrangeFox (topjohnwu has stated in future Magisk versions the renaming to zip will stop working, but it's good for now).
From memory I think you now need to wipe the data partition again, but it's worth a try without, and see if you bootloop?
Once you're back into the regular system you'll need to install the Magisk app (if you haven't done so already), and then activate MagiskHide, and install the MagiskHide Props Config module. You can then use Google Pay again!
Click to expand...
Click to collapse
oupps . Finally things did not as planned . After the running the commands , I was stuck in a loop , always going back to recovery (even if after wipe data). Finally I decided to reflash completely, but this time with lineage OS .
This time I did :
boot to recovery
format data
install lineageOS zip
I tried to install the gapps but the install crash (out of ressources)
so i reboot in system
then reboot back in recovery
flash the gapps file
flash the magisk.zip (the apk previously renammed ) and got an error.
reboot back to system , took the opportunity to declare the phone so google app store works.
then resynchronize with my google account.
once the update and sync completed boot to recovey
flash the magisk zip (the real one from here https://magiskapp.com/zip/#download-now
flash the vbmeta
then reboot to system
It boots fine But I have no root acces . Below are a few screenshot from magisk :
@gsuzeda , @dsclee1
trying to redo the al process all other again. Things are getting worse.
This time, I can flash the lineage rom but when I try to flash the gapps , I got a not enough space .
whatever I do , i got the error, I tried try wipe format everything :
Here is quick step
boot in recovery
format data,
wipe cache , dalvik, internal storage, data.
flashing lineage OS
flashing the gapps (there i get a not enough space)
What did I missed ??
Meanwhile I'l go back to AOSP without magisk
I also updated the doc . Can you check especially the flash ROM part and the magisk part ?
Thanks
chmick said:
@gsuzeda , @dsclee1
trying to redo the al process all other again. Things are getting worse.
This time, I can flash the lineage rom but when I try to flash the gapps , I got a not enough space .
whatever I do , i got the error, I tried try wipe format everything :
Here is quick step
boot in recovery
format data,
wipe cache , dalvik, internal storage, data.
flashing lineage OS
flashing the gapps (there i get a not enough space)
What did I missed ??
Meanwhile I'l go back to AOSP without magisk
I also updated the doc . Can you check especially the flash ROM part and the magisk part ?
Thanks
Click to expand...
Click to collapse
I think you can only install gapps if they are systemless like litegapps
chmick said:
## first version , errors may still occur
Hi everybody, as a noob in the rooting world , here is my small contribution. A step by step how-to , to completely root + installing a custom.
DO NOT HESITATE TO COMMENT SO I CAN IMPROVE THE DOC:
=======================================================================
Read the complete procedure carefully before start: Beware you will loose all data you may have on the phone .and you will loose warranty .
## REQUIREMENTS :a brand new redmi note 9T (direct from the store, no modifications), a pc with windows , the usb cable to link the pc to the phone.
A sdcard where you can store the rom and some zip to put in your phone
Make sure the pc is up ot date with latest android usb driver and adb available :
usb drivers here : https://developer.android.com/studio/run/win-usb
adb software : https://www.xda-developers.com/install-adb-windows-macos-linux/
we also need 7zip https://www.7-zip.org/
Also try to update your phone with the latest MIUI version you can get (at the the time I'm writing this it should be MIUI 12.5, based on android 11).
To upgrade go to system/about phone/ tap on the MIUI logo/ check for update .
If your phone is still stuck to a lower version, you may trick it by changing the region (I choose hong kong) in system/additional settings/region
then try to check for MIUI update again.
## FIRST STEP : unlock the booloader .for this you need a xiaomi account (if you created one with your phone , use it)
You also need to enable developper mode in your phone , so you can access usb debuging . (see the video tutorial)
a video tutoriel here :
you will probably have to wait 168 hours before you can unlock the phone (Yes you're not alone to think it's annoying, do not hesitate to complain to xiaomi business department)
there is also this version of the unlocker (to bypass the wait time), but I have not tested it
Moreover the bypass works for devices not yet linked to mi account
Download MiUnlock_bypass_OTP.zip - Generic
Download file MiUnlock_bypass_OTP.zip - Generic - in MiFirm ✅ - Xiaomi MIUI Firmware - ROM - TWRP download free and max speed - The biggest Xiaomi Mi download
mifirm.net
Once your bootloader unlock you phone will be reseted and when you restart it you will be asked for the xiaomi account password again (and you need a network connection).
After completing the setup again, don't forget to reactivate usb debuging option .
### SECOND STEP download and save files
In case your want to rollback, and also if your want to install magisk in some custom rom , you need to download the original MIUI rom here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
from the zip file , you need to extract the boot.img file and transfer the file on your phone
then the install on your phone the magisk apk file : https://magiskapp.com/#magisk-app-apk
run the magisk app , choose install magisk , select patch a file and choose the boot.img file then press the let's go button
Magisk will generate a patched_image_file in your download folder .
copy the patched image file to your sdcard.
on your phone you can install this : https://play.google.com/store/apps/details?id=tk.hack5.treblecheck
It will help you select the type of rom you need to download
Plug your phone to the computer , open a command shell in your adb fastboot directory and type :
adb devices
you should see something like :
List of devices attached
sceqxxxxxxxxxxk device
(if not check your phone screen ,if there is some grant access dialog)
download orangefox from here https://github.com/gsuzeda/twrp_cannon/releases/
put the vbmeta.zip and OrangeFox-R11.0-Unofficial-cannong.zip on the sdcard
put the recovery.img in the same directory than your adb fastboot program
download the latest magisk files release from here :
first the zip : https://magiskapp.com/zip/#download-now
and the apk file : https://magiskapp.com/#magisk-app-apk
and put them on the sdcard
download the latest of the custom rom you want to install. Based on this link (thank you @gsuzeda) https://docs.google.com/spreadsheets/d/1Nm1RAQ_kiSoSBgtzux8uKklLF9TF6-1QvIVCPzW3OCs/edit#gid=0
, I will try AOSP rom here : https://github.com/phhusson/treble_experimentations/releases/latest
but you can also try lineageOS here : https://sourceforge.net/projects/andyyan-gsi/files/
(if you choose AOSP , you can not install magisk , at least for now)
NOTE: If your choose another custom rom , remember you may also need to install google apps as a separate package .
Example for lineageOS , you can download the gapps (MindtheGapps for arm64 )here https://androidfilehost.com/?fid=2188818919693781601
and copy the file to your sdcard
The redmi note 9T code name is CANNONG . It uses ARM64 A/B IMAGES and we want vndklite (read/write on system)
This is important whatever the custom rom you choose to download and install
Now we prepare the image files from the custom ROM so we can choose between two install methods
METHOD ONE is flashing the system.img from the computer with the phone in fastboot mode plugged to the pc.
METHOD TWO is flashing a zip file with the phone in recovery mode (using the orangefox program or twrp)
I choose his method , because you can do all the operation from orangefox recovery
for method two we will use https://forum.xda-developers.com/attachments/gsi_flasher_sdcard-zip.5183639/
(thank you @gsuzeda for the complete method here https://forum.xda-developers.com/t/...ung-galaxy-a51-super-partition-image.4216083/ )
unzip the gsi flasher somewhere on your PC (for me Mydocument\gsiflasher)
exemple usage with AOSP rom:
uncompress the system-roar-arm64-ab-vndklite-gapps.img.xz
copy the img file in the gsi directory of the gsi flasher and rename it system.img (so for me cp system-roar-arm64-ab-vndklite-gapps.img to Mydocument\gsiflasher\gsi\system.img).
then create a zip file with the 3 directories (gsi, META-INF, scripts) in Mydocument\gsiflasher using 7 zip , for example system-roar-arm64-ab-vndklite-gapps.zip.
And finally copy this zip to the root of your sdcard .
## THIRD STEP : install orangefoxorangefox is a recovery program like twrp but with more option.
Check if you booloader is unlock in your phone by going to system\additonal settings\developper option\mi unlock status
If the booloader is unlock then you can install recovery orangefox .
Make sure than usb debugging and install via usb is checked in the developper option of your phone
power off your phone and restart your phone in fastboot mode (volume down + power )
plug it to your pc .
open a command shell in the directory were fastboot is installed
write the command :
fastboot devices
it should give you a list with your device
then write the command
fastboot flash recovery recovery.img
once the install complete reboot your phone in recovery mode with the command :
fastboot reboot recovery
once boot in recovery mode you should see the orangefox menu.
View attachment 5349227
Use the "Files" at the bottom at the screen explore to go to the sdcard and tap on the orangefox zip files .
then swipe to install
Once the file installed , the phone should reboot in recovery.
Then use the file explorer to find the vbmeta.zip
ttap the file and swipe to install
after the install the phone should reboot.
a simple check step to see if everything went right
## FOURTH STEP , test and install custom OSThere is two method to install , via recovery or via fastboot
I choose to use orangefox recovery
via recovery
reboot in recovery mode (volume up +power)
Once booted in orangefox recovery
first format the DATA (using the wipe menu,and you need to type yes to confirm )
Then reboot to recovery (from the orangefox menu choose reboot then recovery)
once rebooted in recovery
wipe data cache and dalvik
then with the file menu of orangefox navigate to the root of your sdcard where you stored the system zip we created for example system-roar-arm64-ab-vndklite-gapps.zip.
tap the zip and swipe to install
(if your choose another rom , do the same thing to also intall the gapps zip file)
once the install complete
wipe data cache and dalvik
reboot the phone .
## FIFTH STEP check installyour phone should now start with AOSP version of android and start the setup program.
If you get a message like your device is not play protect certified :
connect your phone to your computer, in a command shell type :
adb root
adb shell
sqlite3 /data/data/com.google.android.gsf/databases/gservices.db
select * from main where name = "android_id";
then copy the id number printed and go there :
Sign in - Google Accounts
and enter the id in the text box and press register
wait 15 minutes and reboot your phone and finish the setup process and connect to google store with your gmail account
If your installation complain about the sd card, choose format as external. (you may have to transfer the files of step one in the card again)
## SIXTH STEP : install magisk(DOES NOT WORK WITH AOSP ROM)
reboot in recovery.
in the orangefox file menu :
search your magisk.zip file on the sdcard , tap and swipe to install.
Then choose the patched_boot_img file and choose /boot to install
Then choose the vbmeta.zip and install
wipe cache and reboot
All you want to know about magisk is here : https://magiskapp.com/
### LAST STEP , secure backnow disable usb debugging
unchecked the option : install app from unknow sources
### ROLLBACKIn case you want to rollback to MIUI rom
go there : https://www.getdroidtips.com/guide-flash-miui-rom-xiaomi-devices/
and follow the chapter : the How to Flash Xiaomi Firmware via TWRP Recovery
Click to expand...
Click to collapse
I will try after thanks you and everybody who help to do this !
for those that may interest, I've not been able to make the fastboot cli tool work on windows in a virtualbox virtual machine (all my computers run on Debian), so unable to unlock from a VM (tried different versions of windows and Android fastboot USB drivers).
I had to find a windows machine for the unlock tool to work.
So don't waste your time fighting with VMs for this phone at least (it used to work just fine on my old redmi note 5 pro).
i can't flash system on my note 9t 5g
my flash system : octavi os
Hi, what is the difference between lineage-18.1-20210914-UNOFFICIAL-treble_arm64_bvS.img.xz and lineage-18.1-20210914-UNOFFICIAL-treble_arm64_bvS-vndklite.img.xz please ?
Please i follow steps but t's made a bootlop after flash rom (AOSP or lineage), only stock rom works...
chmick said:
## first version , errors may still occur
Hi everybody, as a noob in the rooting world , here is my small contribution. A step by step how-to , to completely root + installing a custom.
DO NOT HESITATE TO COMMENT SO I CAN IMPROVE THE DOC:
=======================================================================
Read the complete procedure carefully before start: Beware you will loose all data you may have on the phone .and you will loose warranty .
## REQUIREMENTS :a brand new redmi note 9T (direct from the store, no modifications), a pc with windows , the usb cable to link the pc to the phone.
A sdcard where you can store the rom and some zip to put in your phone
Make sure the pc is up ot date with latest android usb driver and adb available :
usb drivers here : https://developer.android.com/studio/run/win-usb
adb software : https://www.xda-developers.com/install-adb-windows-macos-linux/
we also need 7zip https://www.7-zip.org/
Also try to update your phone with the latest MIUI version you can get (at the the time I'm writing this it should be MIUI 12.5, based on android 11).
To upgrade go to system/about phone/ tap on the MIUI logo/ check for update .
If your phone is still stuck to a lower version, you may trick it by changing the region (I choose hong kong) in system/additional settings/region
then try to check for MIUI update again.
## FIRST STEP : unlock the booloader .for this you need a xiaomi account (if you created one with your phone , use it)
You also need to enable developper mode in your phone , so you can access usb debuging . (see the video tutorial)
a video tutoriel here :
you will probably have to wait 168 hours before you can unlock the phone (Yes you're not alone to think it's annoying, do not hesitate to complain to xiaomi business department)
there is also this version of the unlocker (to bypass the wait time), but I have not tested it
Moreover the bypass works for devices not yet linked to mi account
Download MiUnlock_bypass_OTP.zip - Generic
Download file MiUnlock_bypass_OTP.zip - Generic - in MiFirm ✅ - Xiaomi MIUI Firmware - ROM - TWRP download free and max speed - The biggest Xiaomi Mi download
mifirm.net
Once your bootloader unlock you phone will be reseted and when you restart it you will be asked for the xiaomi account password again (and you need a network connection).
After completing the setup again, don't forget to reactivate usb debuging option .
### SECOND STEP download and save files
In case your want to rollback, and also if your want to install magisk in some custom rom , you need to download the original MIUI rom here :
Xiaomi Firmware Updater
The ultimate script that provides firmware packages for Xiaomi devices.
xiaomifirmwareupdater.com
from the zip file , you need to extract the boot.img file and transfer the file on your phone
then the install on your phone the magisk apk file : https://magiskapp.com/#magisk-app-apk
run the magisk app , choose install magisk , select patch a file and choose the boot.img file then press the let's go button
Magisk will generate a patched_image_file in your download folder .
copy the patched image file to your sdcard.
on your phone you can install this : https://play.google.com/store/apps/details?id=tk.hack5.treblecheck
It will help you select the type of rom you need to download
Plug your phone to the computer , open a command shell in your adb fastboot directory and type :
adb devices
you should see something like :
List of devices attached
sceqxxxxxxxxxxk device
(if not check your phone screen ,if there is some grant access dialog)
download orangefox from here https://github.com/gsuzeda/twrp_cannon/releases/
put the vbmeta.zip and OrangeFox-R11.0-Unofficial-cannong.zip on the sdcard
put the recovery.img in the same directory than your adb fastboot program
download the latest magisk files release from here :
first the zip : https://magiskapp.com/zip/#download-now
and the apk file : https://magiskapp.com/#magisk-app-apk
and put them on the sdcard
download the latest of the custom rom you want to install. Based on this link (thank you @gsuzeda) https://docs.google.com/spreadsheets/d/1Nm1RAQ_kiSoSBgtzux8uKklLF9TF6-1QvIVCPzW3OCs/edit#gid=0
, I will try AOSP rom here : https://github.com/phhusson/treble_experimentations/releases/latest
but you can also try lineageOS here : https://sourceforge.net/projects/andyyan-gsi/files/
(if you choose AOSP , you can not install magisk , at least for now)
NOTE: If your choose another custom rom , remember you may also need to install google apps as a separate package .
Example for lineageOS , you can download the gapps (MindtheGapps for arm64 )here https://androidfilehost.com/?fid=2188818919693781601
and copy the file to your sdcard
The redmi note 9T code name is CANNONG . It uses ARM64 A/B IMAGES and we want vndklite (read/write on system)
This is important whatever the custom rom you choose to download and install
Now we prepare the image files from the custom ROM so we can choose between two install methods
METHOD ONE is flashing the system.img from the computer with the phone in fastboot mode plugged to the pc.
METHOD TWO is flashing a zip file with the phone in recovery mode (using the orangefox program or twrp)
I choose his method , because you can do all the operation from orangefox recovery
for method two we will use https://forum.xda-developers.com/attachments/gsi_flasher_sdcard-zip.5183639/
(thank you @gsuzeda for the complete method here https://forum.xda-developers.com/t/...ung-galaxy-a51-super-partition-image.4216083/ )
unzip the gsi flasher somewhere on your PC (for me Mydocument\gsiflasher)
exemple usage with AOSP rom:
uncompress the system-roar-arm64-ab-vndklite-gapps.img.xz
copy the img file in the gsi directory of the gsi flasher and rename it system.img (so for me cp system-roar-arm64-ab-vndklite-gapps.img to Mydocument\gsiflasher\gsi\system.img).
then create a zip file with the 3 directories (gsi, META-INF, scripts) in Mydocument\gsiflasher using 7 zip , for example system-roar-arm64-ab-vndklite-gapps.zip.
And finally copy this zip to the root of your sdcard .
## THIRD STEP : install orangefoxorangefox is a recovery program like twrp but with more option.
Check if you booloader is unlock in your phone by going to system\additonal settings\developper option\mi unlock status
If the booloader is unlock then you can install recovery orangefox .
Make sure than usb debugging and install via usb is checked in the developper option of your phone
power off your phone and restart your phone in fastboot mode (volume down + power )
plug it to your pc .
open a command shell in the directory were fastboot is installed
write the command :
fastboot devices
it should give you a list with your device
then write the command
fastboot flash recovery recovery.img
once the install complete reboot your phone in recovery mode with the command :
fastboot reboot recovery
once boot in recovery mode you should see the orangefox menu.
View attachment 5349227
Use the "Files" at the bottom at the screen explore to go to the sdcard and tap on the orangefox zip files .
then swipe to install
Once the file installed , the phone should reboot in recovery.
Then use the file explorer to find the vbmeta.zip
ttap the file and swipe to install
after the install the phone should reboot.
a simple check step to see if everything went right
## FOURTH STEP , test and install custom OSThere is two method to install , via recovery or via fastboot
I choose to use orangefox recovery
via recovery
reboot in recovery mode (volume up +power)
Once booted in orangefox recovery
first format the DATA (using the wipe menu,and you need to type yes to confirm )
Then reboot to recovery (from the orangefox menu choose reboot then recovery)
once rebooted in recovery
wipe data cache and dalvik
then with the file menu of orangefox navigate to the root of your sdcard where you stored the system zip we created for example system-roar-arm64-ab-vndklite-gapps.zip.
tap the zip and swipe to install
(if your choose another rom , do the same thing to also intall the gapps zip file)
once the install complete
wipe data cache and dalvik
reboot the phone .
## FIFTH STEP check installyour phone should now start with AOSP version of android and start the setup program.
If you get a message like your device is not play protect certified :
connect your phone to your computer, in a command shell type :
adb root
adb shell
sqlite3 /data/data/com.google.android.gsf/databases/gservices.db
select * from main where name = "android_id";
then copy the id number printed and go there :
Sign in - Google Accounts
and enter the id in the text box and press register
wait 15 minutes and reboot your phone and finish the setup process and connect to google store with your gmail account
If your installation complain about the sd card, choose format as external. (you may have to transfer the files of step one in the card again)
## SIXTH STEP : install magisk(DOES NOT WORK WITH AOSP ROM)
reboot in recovery.
in the orangefox file menu :
search your magisk.zip file on the sdcard , tap and swipe to install.
Then choose the patched_boot_img file and choose /boot to install
Then choose the vbmeta.zip and install
wipe cache and reboot
All you want to know about magisk is here : https://magiskapp.com/
### LAST STEP , secure backnow disable usb debugging
unchecked the option : install app from unknow sources
### ROLLBACKIn case you want to rollback to MIUI rom
go there : https://www.getdroidtips.com/guide-flash-miui-rom-xiaomi-devices/
and follow the chapter : the How to Flash Xiaomi Firmware via TWRP Recovery
Click to expand...
Click to collapse
please when I want install magisk i have a big issue:
E:unable to open block devices /dev/blocks/loop16: No such device or adress ! I have these lines a loop16 to loop62 !
Could you help to fix it please ?
My wife is angry that i stay too much times on this problem and me too !!! thanks you so much
dsclee1 said:
Looks good.
The default PHH GSI Custom Rom has inbuilt root rather than Magisk, which is a bit annoying as you can't get SafetyNet working, so can't use Google Pay (and other apps that require SafetyNet).
You can uninstall the inbuilt root and replace it with Magisk, but it's a bit fiddly (like most things on this phone!), as the Magisk app has an issue finding the Magisk su binary.
You need to be using the vndklite build so you can get write access to the system partition. From a root shell (which will be using the inbuilt root to start with). You need to run this:
Code:
mount -o remount,rw /
echo 'export PATH /sbin:/product/bin:/apex/com.android.runtime/bin:/apex/com.android.art/bin:/system_ext/bin:/system/bin:/system/xbin:/odm/bin:/vendor/bin:/vendor/xbin' >> init.environ.rc
mount -o remount,ro /
Reboot to OrangeFox, and in terminal run this (to remove the inbuilt su):
Code:
mount /system_root
mount -o remount,rw /system_root
touch /system_root/system/phh/secure
umount -l /system_root/system/xbin/su
rm /system_root/system/xbin/su
rm /system_root/system/bin/phh-su
rm /system_root/system/etc/init/su.rc
rm /system_root/system/bin/phh-securize.sh
rm -Rf /system_root/system/{app,priv-app}/me.phh.superuser/
rm -Rf /system_root/data/su
umount /system_root
Download the latest Magisk apk (v23 at time of writing) from https://github.com/topjohnwu/Magisk/releases/download/v23.0/Magisk-v23.0.apk and rename it to Magisk-v23.0.zip. Copy it over to your phone, and install it using OrangeFox (topjohnwu has stated in future Magisk versions the renaming to zip will stop working, but it's good for now).
From memory I think you now need to wipe the data partition again, but it's worth a try without, and see if you bootloop?
Once you're back into the regular system you'll need to install the Magisk app (if you haven't done so already), and then activate MagiskHide, and install the MagiskHide Props Config module. You can then use Google Pay again!
Click to expand...
Click to collapse
Is it possible to somehow pack all this into a Zip archive for convenience? So that you can simply install through the recovery.
I recommend this rom.
https://sourceforge.net/projects/gsi-projects/files/v415-Aug/crDroid-8.8/crDroid-8.8-arm64_bgN-vndklite-Unofficial.img.xz/download