hi who knows how to solve the charger problem takes a long time Is it necessary to change the socket and cable black shark 4 - Xiaomi Black Shark 3 Questions & Answers

after the update to Android 11 a period of days ... what happened to my bs3 was that the charging time took longer than before the update ... and the bs3 became hot .... indeed it was a hyper change .... I used a charger and cable original .... I hope the black shark can solve this problem ... so that it does not happen to other black shark users .... thank you

Related

MDA3 wont go on anymore

Dear All
i have a big problem i last used my MDA3 4 days ago and i forgot to put in in a charger and now it wont come on if i put the charger in the mda it doesn't respond at all and no lights come on. If i take out the battery and then put the charger in, the orange light of the mda3 burns and if i put the charger itself in the docking station it charges aswell. It is a huge problem and it is a bit worrying that it doesn't work anymore
can somewone please help me with this one
thnx a lot
donot worried about that!
I had same problem like a few days before, but now it's ok. it should be you take off your battary and leave it more than 20 mins, the extra-battary was no more energy. next time, just remeber change your second battary ASAP!
hi
i removed the battery like a whole night butit didn't go on
thnx anyway

RedMi 1S won't Turn on after Battery drain

Hi
I have a RedMi 1S running V45 (Indian Version). I am using this mobile since last 1 month. I am facing a strage issue with the phone.
Whenever the battery drains completely and the phone get switched off, it is taking forever to switch on the phone even after charging. I atleast need to charge it for 1 or 2 hours to see something on the screen. Its like the phone is completely dead.
I tried taking of the battery and inserted it and then charged. At this stage only thing I notice is the status LED glows in RED for a couple of seconds and like dead. After one or 2 hours, I see that LED starts blinking in RED. After this I need to wait for another 30 min or 1 hour to be able to switch on the phone. It is like the phone is taking almost 2 hours to get the initial charge to switch on the phone.
Is anyone facing same kind of issue?
Thanks
No mine is fine..
It only takes about 10-15s normally to gain initial charge to boot up !
Maybe some issue with charging?
No such issue faced yet. Once mine got fully discharged , but started in few seconds of charging.
Issue with the Charger
Hi
Looks like issue/compatibility with the Charger. I was using Samsung 2.5A charger which I bought for old mobile. Today, I tested with the original MI charger and the phone immediately showing the charging status. The MI original charger is 2A one. But still I think it has some compatibility issue with other chargers.
Thanks for your replies.
Dont!!!
@mail2eswar Please Dont use any other charger except xiaomi charger!! Its Snapdragon 400 8228 and it actually supports Qualcomm Quick charge 2.0 but its not working (donno bcaz of kernel or its locked) So if u use any other charger u'll end up in SoC failures :silly: and leads Motherboard replacement!!!! :cyclops:
Pavan l said:
@mail2eswar Please Dont use any other charger except xiaomi charger!! Its Snapdragon 400 8228 and it actually supports Qualcomm Quick charge 2.0 but its not working (donno bcaz of kernel or its locked) So if u use any other charger u'll end up in SoC failures :silly: and leads Motherboard replacement!!!! :cyclops:
Click to expand...
Click to collapse
Thank you. I just started using the Original Mi charger today. I will continue using the same.
i'm newbie ! ( sorry for bad english )
I'm new here. i did everything in this thread and i don't think the battery works for me . how many percent battery drained over 1 hour ?
and universal initd said that my kernel does not support init.d . had anyone encountered this ?
mail2eswar said:
Hi
Looks like issue/compatibility with the Charger. I was using Samsung 2.5A charger which I bought for old mobile. Today, I tested with the original MI charger and the phone immediately showing the charging status. The MI original charger is 2A one. But still I think it has some compatibility issue with other chargers.
Thanks for your replies.
Click to expand...
Click to collapse
Don't ever use another's phone as your Charger. Different V and A are the main cause of your issue.
mail2eswar said:
Hi
I have a RedMi 1S running V45 (Indian Version). I am using this mobile since last 1 month. I am facing a strage issue with the phone.
Whenever the battery drains completely and the phone get switched off, it is taking forever to switch on the phone even after charging. I atleast need to charge it for 1 or 2 hours to see something on the screen. Its like the phone is completely dead.
I tried taking of the battery and inserted it and then charged. At this stage only thing I notice is the status LED glows in RED for a couple of seconds and like dead. After one or 2 hours, I see that LED starts blinking in RED. After this I need to wait for another 30 min or 1 hour to be able to switch on the phone. It is like the phone is taking almost 2 hours to get the initial charge to switch on the phone.
Is anyone facing same kind of issue?
Thanks
Click to expand...
Click to collapse
Did you get any solution for this issue I'm facing the same the same problem. I'm unable to restart my redmi 1s
Eaxct same problem on my Redmi 1S
Exactly the same issue with mu Redmi 1S. Initially everything was fine. Then one day I lost my original Charger (1 Amp) , and I started looking for a replacement charger. I got one 2 Amp Fast charger from a local store and initially everything was fine and the Phone used to charge fine but then it wont hold the charge for too long. So I started using my Redmi Note4 charger which again is a 2 Amp charger.
But as I see is that if my phone is once drained fully, it is not easy to start back. 2 Amp charger connected for 3 hours straight did'nt help, apart from the intermittent flicker of the LED once a while. No battery charging animation on the screen.
Then I took 1.2 Amp Nexus Charger and behold the full screen battery charging animation pops up immediately. I could start my phone while charging.
My inference is that get an original Xiaomi Redmi 1S (1 Amp) charger if you can. Or else suffer like me
i have the same problem . did you fix it
exactly same problem here. Difference is that I'm using Redmi 1s for more than 3 yrs and suddenly out of nowhere these happened ( after battery discharged its not starting and a red led is blinking, even removing battery and connecting to the charger didn't work). Someone mentioned here not to use different charger, probably they r right bcz I used samsung charger while this happened. Went to Mi Authorized Servicing Centre they told Motherboard is damaged and will cost Rs. 4800/-. No way man! my Mi was of 5999/- not gonna fix it with 4800/-. I'll rather go for a new one.
can i solve this problem by changing another os
Yes You are right. Today after complete battery drain, I have connected phone to another charger that time LED on mobile start blinking so I assume that it started charging while it was not. After another one hr I tried to switched on but it was not switching on so I was worried and I started searching solution, Strangly when I connected Orignal Charger , it immediately shows battery symbol which was showing 0% charge. Thanks to this thread which help me to find solution.

There is no charge of battery...desp

Hi everyone! Sorry for my poor english but I need help. I know that maybe there is solution inside the forum but I can't find it (blind!). So...few weeks ago I noticed that tablet's energy suddenly went down from about 30% -> 0% (and it happened after each charching) . Before this situation I was able to work on 1% (with dimming of course) for quite long time... So a week ago after connecting charger I saw on the screen a charching logo but there was now effect (You know - the green battery). I connected tablet to AC charger and to USB port on my PC there was no effect. When I tried to switch on - tablet starts and after booting showed 0% of charge and ****ched of. So... I took back cover and disconnected battery for few houres...and without USB charging tablet starts and showed 6% of battery then went o 5% (dimming) and it happends again and again. So my question is: Anybody knows if changing the old battery for a new one (replacement) about 30$ will solve this situation? Thank you in advance for your replies
Battery and charging port will fix this. Only mention charching port because its cheap and easy to replace while swapping batteries
Ok! So now I have to look also for a charging port . I'll do it. Thank you for advice!
I had the same issue. I sent the tablet to a service center. They said the charging port was gone, and the battery is weak too (after 3 years of heavy use). Both replaced for $69 (including tax). The battery is OEM, much better than cheap Chinese ones on eBay.

I have an issue with my gt-n5100 . please gauid me

Hi, these are my problems to charging ;
After 7,8 months since i rooted my tablet can't charging when connected to the Ac . In the right above of LCD dosen't appearence any charging sign. But after one or two hours it start to be charge , and again it stop and miss Ac.
I changed its power hardwaer and charging usb suket and AC power , but no any effected on it to solving my problem. . At last i re-rooted my tablet by odin , but this issue also not solved. Please help me.
Android ver. 4.4.2
Galaxy note8. (Gt-n5100)

Poco M3 does not turn on anymore ( Solution / Fix )

Problem with this phone the new update xiaomi original rom / kernel discharge battery to 0.00 V ( i measured it with multimeter ) and you cant charge phone and thats why you cant turn on this phone anymore .
But i found the fix
Steps :
1 . Just dissasembly the phone
2 . Remove the battery from motherboard
3 . From backside of motherboard remove metal plates from the chips the CPU heat that side for 2-3 minutes with hair dryer when you dont have heating gun ( I was inspired using hair dryer in times of iPhone 4S wifi / signal problem )
4 . Put every parts back with battery plugged on motherboard
5 . Put the charger to your Poco M3 and turn it on
6 . You are done let phone charge to 100 % and remove that crappy Xiaomi ROM named MIUI and install any rom what you like .
I know its stupid fix but its working . I dont know its permamently damaged IC charge chip / CPU chip because of kernel / rom new update but its works for me fine for now .
Update : you need change PMI632 902-00 chip and it will fix you this problem
so after doing this you can reboot or have it shutdown lets say using a custom rom?
Hi. I encountered this problem with my phone but I don’t have the skills and the equipment to disassemble my phone so I tried other solutions.
I wait for days until the battery is completely discharged. When I plug it to charge, the screen turns on again and it begins charging again, initially showing an empty battery icon. Before unplugging, I check the battery percentage. If it’s at 10%, I wait for the screen to turn off again and then unplug the charger. The screen turns on again and I press the power button and my phone is alive again. These specific steps are important as well as timing. I had failed a few times so I had to wait for the battery to discharge again to retry. Hope this helps someone else.
But I have another question and I hope it’s ok to ask here. Is this a hardware problem? I was thinking it was a software problem so I was planning to root my phone hoping to not encounter this problem of my phone suddenly not turning on.
HexA7 said:
Hi. I encountered this problem with my phone but I don’t have the skills and the equipment to disassemble my phone so I tried other solutions.
I wait for days until the battery is completely discharged. When I plug it to charge, the screen turns on again and it begins charging again, initially showing an empty battery icon. Before unplugging, I check the battery percentage. If it’s at 10%, I wait for the screen to turn off again and then unplug the charger. The screen turns on again and I press the power button and my phone is alive again. These specific steps are important as well as timing. I had failed a few times so I had to wait for the battery to discharge again to retry. Hope this helps someone else.
But I have another question and I hope it’s ok to ask here. Is this a hardware problem? I was thinking it was a software problem so I was planning to root my phone hoping to not encounter this problem of my phone suddenly not turning on
Click to expand...
Click to collapse
i concern about this cause i have this phone too.. and as i know its a hardware problem, mb faulty

Categories

Resources