Develop Bugs

[GUIDE][A/B][A505x] Guide on How to flash GSI

I'm not responsible for whatever damage this could possibly cause to your device.
If you appreciate the work i have done, Feel free to buy me a cup of coffee @paypal
Welcome to GSI For Galaxy A50 ONLY FOR A505F/A505FN/A505GN​
Some information you should know..
Full TREBLE Documentation here : https://source.android.com/devices/architecture
Generic System Image (GSI) Documentation here : https://source.android.com/setup/build/gsi
If any bugs you face, Report them to the appropriate Threads of the GSI you installed or github issues section, as those are not mine to fix i only provide Guide that allows GSIs to run on.
- VENDOR FEATURES:
Wi-Fi & Hotspot
Telephony & Ril (Mobile Data, Calls, SMS, MMS)
NFC
Camera
Bluetooth
GPS
All Sensors
- STEPS FOR INSTALLING GSIs:
Download the desired GSI (it MUST be A/B_arm64 Variant)
unpack it if it wasn't in .IMG format
Go to TWRP , Install , Install IMAGE
Pick your GSI and select SYSTEM IMAGE
- STEPS FOR INSTALLING GAPPS
Download the appropriate OpenGapps.org
Go to TWRP , Install
Pick your OpenGapps.zip
Reboot to System
- FOR INSTALLING FIXES:
Camera Fix (Flash only on NON Working GSIs)
- KNOWN BUGS:
Fingerprint
Bluetooth calls are broken
May be more, Let me know
Downloads. F.A.Qs below
XDA:DevDB Information
Guide on How to flash GSI, ROM for the Samsung Galaxy A50
Contributors
prashantp01
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
Version Information
Status: Beta
Created 2019-05-26
Last Updated 2019-05-26

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Come hang with us on our chat : Telegram
----------------------------------------------------------------
Generic System Image (GSI) : Github
Treble folder : Gdrive
---------------------------------------------------------------
Bugs :
1- some users might face SDCard issues
If you did , back up its data and format it in GSI.
2- If you face "Error 70: Insufficient storage space available in the system partition" while flashing Gapps
If you get do this : Wipe > Advanced Wipe > select system > Repair or Change File System > Resize File System
Go back and flash Gapps

F.A.Q
Q : Do i need to format internal storage ?
A : No
Q : What Camera is recommended ?
A : Footej and open camera works the best
Q : Can i flash any GSIs ?
A : No, only AB_ARM64 Are supported
Q : Can i flash any sGSIs ?
A : No unless they match the Arch above

But our device is A only right? why flash AB

Lynjun002 said:
But our device is A only right? why flash AB
Click to expand...
Click to collapse
your device is System-as-root, which is somewhat similar to A/B, so AB GSI will boot on your device.

Lynjun002 said:
But our device is A only right? why flash AB
Click to expand...
Click to collapse
for more information : https://source.android.com/devices/bootloader/system-as-root

Lynjun002 said:
But our device is A only right? why flash AB
Click to expand...
Click to collapse
yes its A, flash A only

kamalkiraa said:
yes its A, flash A only
Click to expand...
Click to collapse
You can even flash A only gsi, but it will not boot, so prefer A/B

does anyone try any GSI?

kamalkiraa said:
yes its A, flash A only
Click to expand...
Click to collapse
Hi thanks for response

kamalkiraa said:
does anyone try any GSI?
Click to expand...
Click to collapse
It's great for the novelty but without fingerprint recognition and bluetooth calls, not to mention other bugs that will crop up, this isn't going to be a daily driver. Custom ROMs are still the best bet but without any developers on board, it doesn't seem like much development will be happening for this device.

t3chg33k said:
It's great for the novelty but without fingerprint recognition and bluetooth calls, not to mention other bugs that will crop up, this isn't going to be a daily driver. Custom ROMs are still the best bet but without any developers on board, it doesn't seem like much development will be happening for this device.
Click to expand...
Click to collapse
Ultra Wide Angle work on GSIs ?

Arnaud Créative Studios said:
Ultra Wide Angle work on GSIs ?
Click to expand...
Click to collapse
No as you wont have the stock samsung camera and gcam or any other 3rd party camera does not support the wide angle lens on our devices *yet*.

Doubt
Do the in display fingerprint scanner work? Or does even does face unlock work? I am very curious

bobandar said:
No as you wont have the stock samsung camera and gcam or any other 3rd party camera does not support the wide angle lens on our devices *yet*.
Click to expand...
Click to collapse
Ok I think they'll add support in future,a lot of phone have Wide Angle cam
---------- Post added at 07:49 PM ---------- Previous post was at 07:48 PM ----------
Pratham Gajjar said:
Do the in display fingerprint scanner work? Or does even does face unlock work? I am very curious
Click to expand...
Click to collapse
Face Unlock work on all devices for Fingerprint I can't answer you I haven't buy A50 yet I'll do next month for my birthday

Just inquisitive as I have rooted my device with stock recovery only. From what I have read, TWRP doesn't work with the latest kernels, so how are all the patches going to be flashed assuming the system image is flashed using fastboot?

t3chg33k said:
Just inquisitive as I have rooted my device with stock recovery only. From what I have read, TWRP doesn't work with the latest kernels, so how are all the patches going to be flashed assuming the system image is flashed using fastboot?
Click to expand...
Click to collapse
I think this is a good beginning please keep the good work

Any update please :angel: ?
Maybe someone has tried which roms is the best for our lovely A50 ?

Pratham Gajjar said:
Do the in display fingerprint scanner work? Or does even does face unlock work? I am very curious
Click to expand...
Click to collapse
as i mentioned in bug list FP will not work
xsleena said:
Any update please :angel: ?
Maybe someone has tried which roms is the best for our lovely A50 ?
Click to expand...
Click to collapse
Do u have twrp installed ?

prashantp01 said:
Do u have twrp installed ?
Click to expand...
Click to collapse
not for now

MIUI 11 9.9.25

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flashing Instructions
- First of all you need to flash the twrp. You can also use recovery of your choice
- Boot into twrp and Format data and wipe system/data/cache/dalvik.
- Flash the rom zip
- Flash Magisk if you want to use TWRP in future
- Reboot to System.
- For every upgrade you dont need to format your device.
Download
*CLICK HERE TO DOWNLOAD*
Screenshots:
XDA:DevDB Information
China Weekly , ROM for the Redmi Note 8 Pro
Contributors
fi4tch
ROM OS Version: 2.3.x Gingerbread
Version Information
Status: Beta
Created 2019-09-25
Last Updated 2019-09-25

Hey @fi4tch
Any chance you could get us the global Rom
I've done a search and there is one preinstalled in European ver of the phone and from what i see xiaomi didn't release even stock global Rom mb you will know if we have to wait or just hope for some developer beacuse xiaomi eu won't ne supporting this device Cheers have a nice day

Hi,
As the owner of the Redmi Note 8 Pro bought fro the official Xiaomi Store in Europe/France, I would like to say that the global ROM for this phone exists.
As it is officially released in at least France, Spain and Germany I would say that chances are, the Global ROM will show up pretty quickly. My guess is : for the next official update, we will have it.
If there is a way to "extract" a whole ROM from a phone, I would be glad to share the ROM provided in my phone.
Regards.

NexusPenguin said:
Hi,
As the owner of the Redmi Note 8 Pro bought fro the official Xiaomi Store in Europe/France, I would like to say that the global ROM for this phone exists.
As it is officially released in at least France, Spain and Germany I would say that chances are, the Global ROM will show up pretty quickly. My guess is : for the next official update, we will have it.
If there is a way to "extract" a whole ROM from a phone, I would be glad to share the ROM provided in my phone.
Regards.
Click to expand...
Click to collapse
Im not an developer but my guess is you could boot twrp make a backup and then share that backup with us

Monratis said:
Im not an developer but my guess is you could boot twrp make a backup and then share that backup with us
Click to expand...
Click to collapse
Hi,
I could do that, but that would require to have an unlocked bootloader.
I have applied to get one, but that will take another 5 days or so.
When I have unlocked bootloader, Global ROM might already be available.
If not, we'll see
Regards.

NexusPenguin said:
Hi,
I could do that, but that would require to have an unlocked bootloader.
I have applied to get one, but that will take another 5 days or so.
When I have unlocked bootloader, Global ROM might already be available.
If not, we'll see
Regards.
Click to expand...
Click to collapse
Hey
I guess we will have a global rom in a few days but if not would like to get your backup
Cheers

Monratis said:
Hey
I guess we will have a global rom in a few days but if not would like to get your backup
Cheers
Click to expand...
Click to collapse
Not need to backup. Just want to track the link before your phone with next upgrade packages.....

Any news from global rom?

bourlias7 said:
Any news from global rom?
Click to expand...
Click to collapse
the global rom release.search like this 'begonia_id_global_images_V10.4.2.0.PGGIDXM_20190926.0000.00_9.0_global'
I advice Don't flash the magisk .
This global rom is ok,I have tested it.

https://c.mi.com/oc/miuidownload/detail?device=1900375

Monratis said:
Hey @fi4tch
Any chance you could get us the global Rom
I've done a search and there is one preinstalled in European ver of the phone and from what i see xiaomi didn't release even stock global Rom mb you will know if we have to wait or just hope for some developer beacuse xiaomi eu won't ne supporting this device Cheers have a nice day
Click to expand...
Click to collapse
Its finally realized.. I want also to change my EU to MI ROM

The source of the Global ROM is this:
http://c.mi.com/thread-2508132-1-0.html

tze_vitamin said:
Its finally realized.. I want also to change my EU to MI ROM
Click to expand...
Click to collapse
Please tell if you managed to change roms?

I will need to test it someday.

T30K said:
Please tell if you managed to change roms?
Click to expand...
Click to collapse
I dont know.. I satisfied with this MIUI.. but on my Samsung I was having Resurrection remix custom os, the best rom for me,and custom kernel.. I was change governor and have much better battery life and work of phone.. so.. I dont know.. its to early for this phone for custom rom.. maybe if I dont sell it, after the Xiaomi stop updating the system I will flash custom ROM

robbie_lpl said:
https://c.mi.com/oc/miuidownload/detail?device=1900375
Click to expand...
Click to collapse
What is the Redmi Note 8 Pro EEA version whats the difference with global?

Can anybody please tell that MIUI 11 has cross link sharing platform or not (Like Realme share, Oppo share and Vivo share)
If not when it will be available in MI devices and what are those....
Thanks in advance

Any update for stock Android 10 for Redmi Note 8 Pro

Gcam for note 8 pro and it is available in two versions.
#Google camera 5.1. 018
What is in this version
1.night sight
2.photosphere
3.photobooth
4.slow motion
5.raw support
6.HDR+
7.motion
8.panorama
9.lens blur
10.potrait
11.G lens
Download
https://mega.nz/#!jZA1HCTL!9XPoWAE6ZMhLe3IYJ4QOk9uTUTW-q9WJRSkGreuenYE
#Google camera 6.1.021
What is working
Other than the following, all the the specifications are working
1.potrait mode
2.slow motion
3.video mode
4.night sight
Download
https://f.celsoazevedo.com/file/cfiles/gcm1/Gcam_6.1.021_Advanced_V1.6.190614.0200.apk

[RECOVERY][UNOFFICIAL] OrangeFox Recovery R10.1_2 for Redmi Note 8/8T (ginkgo/willow)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OrangeFox Recovery R10.1
for
Redmi Note 8
Codename: ginkgo
Version: R10.1_x
Simple, Beautiful & Minimalistic!
Description
OrangeFox Recovery is a open-source recovery project based on TWRP Official Source Codes with more features that are needed by users most. OrangeFox Recovery aims to make simple and easy to use recovery with more advanced add-ons with it!
Features of R10.1
Check out this link= MOD EDIT: DOWNLOAD LINK REMOVED
Maintainer: Teguhpunya
Download Link:
MOD EDIT: DOWNLOAD LINK REMOVED ​

Work on willow ?!

aby.du.13 said:
Work on willow ?!
Click to expand...
Click to collapse
same question!

aby.du.13 said:
Work on willow ?!
Click to expand...
Click to collapse
Castaldelli said:
same question!
Click to expand...
Click to collapse
Should work:
Code:
META-INF/com/google/android/update-binary:
# ******************************************************
# Description: Installer script for OrangeFox Recovery
# Author: DarthJabba9
# Date: 12 January 2020
# ******************************************************
# the target device(s)
TARGET_DEVICE="ginkgo"
TARGET_DEVICE_ALT="willow"
PRODUCT_DEVICE=$(getprop "ro.product.device")

aby.du.13 said:
Work on willow ?!
Click to expand...
Click to collapse
Well, probably yes but not entirely sure because I am not the maintainer of this recovery.

AlliKix said:
*Updated Magiskboot to 20.2 stable.
Click to expand...
Click to collapse
It says '20.3' (in Magisk Manager).
And it works on willow (title could be adjusted accordingly?).

jer194 said:
It says '20.3' (in Magisk Manager).
And it works on willow (title could be adjusted accordingly?).
Click to expand...
Click to collapse
Say it was done.

jer194 said:
It says '20.3' (in Magisk Manager).
And it works on willow (title could be adjusted accordingly?).
Click to expand...
Click to collapse
Does it work normal? My god this is wonderful !!! Thanks!!

Castaldelli said:
Does it work normal? My god this is wonderful !!! Thanks!!
Click to expand...
Click to collapse
All good so far ...

jer194 said:
All good so far ...
Click to expand...
Click to collapse
How do I install ?? Just download and proceed with the normal installation ?? Or do I have to do something first ?? Thank you for your help and attention!

Castaldelli said:
How do I install ?? Just download and proceed with the normal installation ?? Or do I have to do something first ?? Thank you for your help and attention!
Click to expand...
Click to collapse
I've installed via custom recovery (Orange Fox in my case), as usual: just flashed the ZIP (I did via adb sideload).

Castaldelli said:
How do I install ?? Just download and proceed with the normal installation ?? Or do I have to do something first ?? Thank you for your help and attention!
Click to expand...
Click to collapse
TWRP is required, version 3.3.1.0. Flash Mauronofrio's TWRP via adb and then flash this zip. If you don't know how, google it.

AlliKix said:
TWRP is required, version 3.3.1.0. Flash Mauronofrio's TWRP via adb and then flash this zip. If you don't know how, google it.
Click to expand...
Click to collapse
Thanks!!!!

OrangeFox-R10.1_3-Stable-ginkgo.zip is good? i found this on there site

ryzen23 said:
OrangeFox-R10.1_3-Stable-ginkgo.zip is good? i found this on there site
Click to expand...
Click to collapse
Yes it is

New Version is available!
Changelog: OrangeFox recovery R10.1_3 for Redmi Note 8 / 8T - Ginkgo
>Prevent backup error caused by /data/per_boot
>Deal with backup issues relating to Dual-Apps
(/data/vendor_ce/999)
>Reduced brightness values to reduce chance to get
image retention
>Move status bar up behind notch
Download Link:
MOD EDIT: DOWNLOAD LINK REMOVED

Download link is broken
Download link is broken
AlliKix said:
Changelog: OrangeFox recovery R10.1_3 for Redmi Note 8 / 8T - Ginkgo
>Prevent backup error caused by /data/per_boot
>Deal with backup issues relating to Dual-Apps
(/data/vendor_ce/999)
>Reduced brightness values to reduce chance to get
image retention
>Move status bar up behind notch
Download Link:
Orange server
Click to expand...
Click to collapse

senpoos said:
Download link is broken
Click to expand...
Click to collapse
it's not..Downloading perfectly.. check again..or download from MOD EDIT: DOWNLOAD LINK REMOVED

the_weird_aquarian said:
it's not..Downloading perfectly.. check again..or download from here
Click to expand...
Click to collapse
These are old versions. They are R10.0.x, not R10.1.x.

senpoos said:
Download link is broken
Click to expand...
Click to collapse
You can download fromMOD EDIT: DOWNLOAD LINK REMOVED

[ROM][UNOFFICIAL] DotOS 5.2 [Judyp][11.0]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
" #DroidOnTime "
ROM Version: 5.2
Device: judyp
Maintainer: TatsuyaSou
Build Status: UNOFFICIAL
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
"This is a user-friendly thread, all your suggestions are important to us and will be taken into consideration.."
dotOS is an Android ROM that focuses on performance, stability, and User Experience. We focus on making our rom look and feel great without struggling on Performance and Battery! So that one can get the most out of your device.....
FLASH :
Remember: you must be on the Korean V30C stock
Download the latest build and GApps or rom with GApps
Fastboot boot to OFOX
Format Data
Flash the latest build
(optional, don't do this for a gapps rom) Flash gapps
Reboot
ROM
Complete Changelogs: https://changelogs.droidontime.com/
AOSP
Lineage OS
Pixel Experience
Dirty Unicorns
And all other open-source Devs/Teams.
Special thanks:
EmanuelCN - LG G7 dev, the most patient man in the world
LameMonster - LG G7 bed dev
SGCMarkus - LG V30,V40 dev
Important Links
dot OS source
dotOS-Device Sources
Telegram Group
Telegram Channel
Website
Downloads page
REPORTING BUGS !
As soon as the problem occurs, take a LOGCAT!
for more READ THIS
and do not forget to send it to us
​
Device Tree: https://github.com/TatsuyaSou/android_device_lge_judyp
Kernel Source: - https://github.com/EmanuelCN/android_kernel_lge_sdm845
ROM OS Version: 11.x Android R
Version Information
Status: STABLE?
Current Stable Version: v5.2

Wow finally it's on air!

This says its for the v30, would it work on a v35?

gambon0120 said:
This says its for the v30, would it work on a v35?
Click to expand...
Click to collapse
This is not for V30 (joan), this is for V35 (judyp).

If i crossflash to this ROM, can i still go back to 9.0 AWM later on?

ghylander said:
If i crossflash to this ROM, can i still go back to 9.0 AWM later on?
Click to expand...
Click to collapse
You can go back to a9 v350ulm. We also have a10 for awm.
V350AWM30e ATT_US stock & rooted partitions
V350AWM30e.zip (3.7GB) I pulled the stock unmodified slot partitions from a fully updated AT&T V35. I modified them with Magisk and TWRP, and disabled Dm-Verity and ForceEncrypt I flashed them to another V35AWM that had previously been...
forum.xda-developers.com

Kyrimeas said:
We also have a10 for awm.
Click to expand...
Click to collapse
How did you flash that image? with orangefox?

ghylander said:
How did you flash that image? with orangefox?
Click to expand...
Click to collapse
I haven't tried yet. But I can try today. I think it should work.

Kyrimeas said:
I haven't tried yet. But I can try today. I think it should work.
Click to expand...
Click to collapse
I'm a bit adamant of flashing that image, since the OP states many things could go wrong. If you can try it risk-free, please do

is there any bugs?

Well this is very cool going to try flashing this later. I'm on the linege os rom at the moment I'm assuming I have to flash back to the Korean firmware before trying to flash?

Andy2004 said:
Well this is very cool going to try flashing this later. I'm on the linege os rom at the moment I'm assuming I have to flash back to the Korean firmware before trying to flash?
Click to expand...
Click to collapse
Make a data format in ofox and flash DotOS. That should be enough.

thieutd said:
is there any bugs?
Click to expand...
Click to collapse
At the moment I know that:
Usb tethering and volte not working. They cannot be repaired.
Apparently some people have a problem with calling but it may be to blame Korean stock or lack of VoLTE support.

Kyrimeas said:
Make a data format in ofox and flash DotOS. That should be enough.
Click to expand...
Click to collapse
got stuck on a bootloop any idea on how to fix?

Andy2004 said:
got stuck on a bootloop any idea on how to fix?
Click to expand...
Click to collapse
Enter edl and qfil
Restore laf_a and laf_b
Flash stock

Kyrimeas said:
Enter edl and qfil
Restore laf_a and laf_b
Flash stock
Click to expand...
Click to collapse
Well I managed to enter the bootloader and boot into ofox and format data again that seemed to fix the issue thanks for responding anyways.

Kyrimeas said:
At the moment I know that:
Usb tethering and volte not working. They cannot be repaired.
Apparently some people have a problem with calling but it may be to blame Korean stock or lack of VoLTE support.
Click to expand...
Click to collapse
ohh i don't care much about VoLTE but really need Usb tethering. It could be inconvenient to me

ghylander said:
I'm a bit adamant of flashing that image, since the OP states many things could go wrong. If you can try it risk-free, please do
Click to expand...
Click to collapse
This is not a flashable zip. You need to exctract it and flash the partitions via adb or qfil. But the rom is working fine.

Thank you for your contribution.

Kyrimeas said:
This is not a flashable zip. You need to exctract it and flash the partitions via adb or qfil. But the rom is working fine.
Click to expand...
Click to collapse
Hi- Could you pelase explain how to flash the paritions? I am unlocked and can get boot to Orangefox but the ZIp file will not install. Do you mean faslh the partitions with fastboot? Thanks

[ROM][OFFICIAL][ginkgo][12.1] crDroidAndroid v8.x

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/12.0/README.mkdn
Flashing Instructions:
Pre-installation:
gapps (Download from here)
First time installation:
Boot recovery
Format Data, Wipe system
Install ROM
Install gapps (Optional)
Reboot
Update installation:
Boot recovery
Install ROM
Install gapps (Optional)
Reboot
NOTE: If all the flashing process succeeds the terminal output will stop at 47% and report adb: failed to read command: Success. In some cases it will report adb: failed to read command: No error which is also fine.
Sources:
ROM: https://github.com/crdroidandroid
Device sources: https://github.com/crdroidandroid
Download:
ROM https://crdroid.net/ginkgo
Changelog: https://raw.githubusercontent.com/c..._vendor_crDroidOTA/12.0/changelog_ginkgo.txt
Known issues:
* You tell me
Visit official website @ crDroid.net
DarkJoker360 Telegram Updates
crDroid Community Telegram
crDroid Updates Channel
Donate to help our team pay server costs

Reserved

Finish installing crdroid 8.2 on willow, fabulous rom so far!
A big thank for rolling on with crdroid on ginkgo/willow!

I remember flashing this on my sgs4 EU variant. Longest ROM I have ever used on that phone. Thanks for your work, keep it up.

First of all, thanks for keeping crdroid alive for ginkgo. Now the question. Since the title does not have the 'unofficial' tag are you going to apply for official? (I don't really care, but most likely the question will come up sooner or later anyway)

NeoPreacher said:
First of all, thanks for keeping crdroid alive for ginkgo. Now the question. Since the title does not have the 'unofficial' tag are you going to apply for official? (I don't really care, but most likely the question will come up sooner or later anyway)
Click to expand...
Click to collapse
It's already official: https://crdroid.net/ginkgo/8

What about“Fast charging on Chinese variant of Redmi Note 8”？

wsdyleon said:
What about“Fast charging on Chinese variant of Redmi Note 8”？
Click to expand...
Click to collapse
Ryzen kernel

NeoPreacher said:
Ryzen kernel
Click to expand...
Click to collapse
thanks。but i looked up the official site，it seemed like that only Redmi Note 7 Pro and MI A2/Mi 6X were supported。
and does it support ginkgo？or android12？
solved！finnally i find the 16 kernel on kde website！

Is it possible to upgrade from crDroid 6.12 without losing data or should I do a full clean install?

Stilghar82 said:
Is it possible to upgrade from crDroid 6.12 without losing data or should I do a full clean install?
Click to expand...
Click to collapse
If you are switching to an Android version, I recommend a clean installation.

Stilghar82 said:
Is it possible to upgrade from crDroid 6.12 without losing data or should I do a full clean install?
Click to expand...
Click to collapse
Maybe just try it yourself, after taking a full backup, and putting it to a save place?
You always can do a clean flash thereafter, if dirty flash is failing ...

Is it Feb security update?
We should get ready for crDroid 9

What version of TWRP recovery should I use?

kaem84 said:
What version of TWRP recovery should I use?
Click to expand...
Click to collapse
Latest..?

kaem84 said:
What version of TWRP recovery should I use?
Click to expand...
Click to collapse
In alternative try OrangeFox

American_Jesus said:
In alternative try OrangeFox
Click to expand...
Click to collapse
NeoPreacher said:
Latest..?
Click to expand...
Click to collapse
I have read in several places that there is no working TWRP for Android 12, so I am asking

kaem84 said:
I have read in several places that there is no working TWRP for Android 12, so I am asking
Click to expand...
Click to collapse
ah okay. actual twrp based recoveries can for sure flash a12 but you have to decrypt your internal data while flashing using a dfe zip. i don't know if it works with every rom but i know pixel-based roms are also working with encrypted data when using los-based recoveries that are mostly shipped with the rom, look out for it on threads first pages. can't tell more since i've no experience with these. hope it helps a bit. cheers

NeoPreacher said:
ah okay. actual twrp based recoveries can for sure flash a12 but you have to decrypt your internal data while flashing using a dfe zip. i don't know if it works with every rom but i know pixel-based roms are also working with encrypted data when using los-based recoveries that are mostly shipped with the rom, look out for it on threads first pages. can't tell more since i've no experience with these. hope it helps a bit. cheers
Click to expand...
Click to collapse
I have installed CrDroid 8. I have used Disable_Dm-Verity_ForceEncrypt. The system works, it is decrypted. Unfortunately, when I want to enter recovery, TWRP freezes at the logo screen
//edit
I installed OrangeFox recovery via the fastboot command and now recovery is working

Is sensor block per app working?