This is a Odin-flashable custom ROM for the S20 FE 5G (SM-G781B) by @fivanbe.
For now, this is just a base ROM without any significant mods or addons.
Installation instructions:
1. Download official U4CUH1 firmware from Samsung. I used the tool "Frija". Or from this website.
2. Download custom ROM SDRAGON_S20FE-R_U4CUH1_v1.1.zip.
3. Decompress SDRAGON_S20FE-R_U4CUH1_v1.1.zip, and copy the files SDRAGON_MODS-CSC .zip and SDRAGON_MOD-CSC-MULTIACTION.zip to your phones internal memory, not sd-card. If you want root, also copy magisk.apk to the same destination.
4. Put your phone into download mode. To do this, power off the phone. Press and hold vol+ and vol-. Now plug in the USB cable in your phone. When in download mode, press vol+ to continue in download mode.
5. Flash official U4CUH1 firmware with Odin.
Put BL in BL
Put AP in AP
Put CP in CP
Put HOME_CSC in CSC (this is important, otherwise you will lose data if you put CSC in CSC. Always use HOME_CSC)
In Odin options, uncheck "Auto Reboot".
6. Without restarting the phone, flash AP_SDRAGON_S20FE-R_U4CUH1_v1.1.tar and CSC_SDRAGON_S20FE-R_U4CUH1_v1.1.tar with Odin.
7. Reboot your phone into TWRP. To do this, restart your phone from download mode with vol- and power button. Immediately press and hold vol+ and power button to boot into TWRP.
8. Flash SDRAGON_MOD-CSC-MULTIACTION.zip and SDRAGON_MODS-CSC .zip. Optional flash magisk.apk for root.
9. Reboot
This ROM uses Samsung stock kernel source.
This ROM was developed, because I donated a phone to the developer.
this could be (should be) in kernels roms and recoveries. the right has been earned.
and congrats!!
EDIT: out of curiosity what region is U4CUH1 ?
EDIT 2: there's a subreddit called r/GalaxyS20FE maybe post a link to this in there too. I was gonna do it myself but it's you that made this happen so that honor should be yours too.
So if this is U4, doesn't that re-lock the bootloader if previously unlocked?.....nevermind its B....sorry.
I'm not the developer of this ROM, so a mod moved this thread from "kernels roms and recoveries" to here. Those are the XDA rules.
The region stays the same.
As far as I know, you cannot downgrade from U4 to U3 or below.
Ubimo said:
Je ne suis pas le développeur de cette ROM, donc un mod a déplacé ce fil de " roms et récupérations de noyaux " vers ici. Ce sont les règles XDA.
La région reste la même.
Pour autant que je sache, vous ne pouvez pas rétrograder de U4 à U3 ou en dessous.
Click to expand...
Click to collapse
Bonjour et merci pour votre contribution et votre partage. Quelle est la différence avec la ROM d'origine vous dites ne voir aucun changement ?
car ces fonctionnalités peuvent déjà être obtenues en utilisant les modules magisk.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Awesome work, couple quick questions how long has this been tested? Is it stable enough for daily use? Dose it include magisk or do people need to install it themselves
@Full House
Which magisk modules are you using?
This is a base stock rom. I'm running it since yesterday without problems.
Ubimo said:
@Full House
Which magisk modules are you using?
This is a base stock rom. I'm running it since yesterday without problems.
Click to expand...
Click to collapse
for the power menu it's an Xposed module here
[XPOSED][R] Firefds Kit 11.0.3.0-STABLE-2- Customize Samsung OneUI 3.x [28/04/22]
Version for Marshmallow is available here: https://forum.xda-developers.com/t/app-touchwiz-6-0-firefds-kit-customization-for-old-touchwiz-mm-framework.3372401/ Version for Nougat is available here...
forum.xda-developers.com
And for network speed and call recording it's a "DecodecCSC" magisk module from @ Morphée here is the zip to flash in Magisk reboot and enjoy.
If I understood correctly @fivanbe's ROM is not yet fully finished?
Don't wanna be negative or anything like that but from what I have read and quote me if I'm wrong on this ... is this just an official firmware from Samsung? You clam to have some tweaks done but are not working??? There's no real structure to your post stating changelog, screens or even if it's stable to use??? Personally I'm gonna hold off until I see some proper details about this rom and some actual progress...I'm not chancing anything nowadays especially with a phone that I use on a day to day basis
@Ubimo I've read this guide a couple of times with thought to flashing GSIs from PC.
maybe it could be of use to @fivanbe in packaging the rom so even non TWRP users can try this rom out...
[GUIDE] [CUSTOM] How to Install Custom ROM using ODIN without TWRP [PHH] [LineageOS]
Hello, This would be a short & sweet guide on how to install a custom ROM on your Samsung using ODIN. I'm going to tailored this guide for the S10e G9700 HK version (is the phone I own) I'm a linux user but Odin only runs on Windows so this...
forum.xda-developers.com
just a thought
QRCode said:
Is this just an official firmware from Samsung? Y
Click to expand...
Click to collapse
Read the OP, its based of stock Samsung ROM, in this instance is based on Android 11 (https://www.sammobile.com/samsung/galaxy-s20-fe/firmware/SM-G781B/#SM-G781B)
QRCode said:
ou clam to have some tweaks done but are not working??? There's no real structure to your post stating changelog, screens or even if it's stable to use???
Click to expand...
Click to collapse
Read the Op and his subsequent posts fella, Ubimo is not the dev. He donated an S20FE to the dev to get a custom ROM developed. But if you want to want for the dev to post in the ROM forum that's your prerogative.
3mel said:
curiosity what region is U4CUH1 ?
Click to expand...
Click to collapse
Seem to be all countries - https://www.sammobile.com/samsung/galaxy-s20-fe/firmware/SM-G781B/#SM-G781B
Ubimo said:
This is a Odin-flashable custom ROM for the S20 FE 5G (SM-G781B) by @fivanbe.
For now, this is just a base ROM without any significant mods or addons.
Click to expand...
Click to collapse
@fivanbe Thanks for making a start on this ROM, its been a long time coming
Can I/we assume that down the road your planning to make a TWRP flashable version of the ROM and for said ROM to be rooted?
Ubimo said:
I'm not the developer of this ROM, so a mod moved this thread from "kernels roms and recoveries" to here. Those are the XDA rules.
Click to expand...
Click to collapse
I have made a request to get this thread moved to the S20FE 'Roms & kernals" section, it doesen't make sense its here.
b1k3rdude said:
Read the OP, its based of stock Samsung ROM, in this instance is based on Android 11 (https://www.sammobile.com/samsung/galaxy-s20-fe/firmware/SM-G781B/#SM-G781B)
Read the Op and his subsequent posts fella, Ubimo is not the dev. He donated an S20FE to the dev to get a custom ROM developed. But if you want to want for the dev to post in the ROM forum that's your prerogative.
Click to expand...
Click to collapse
Look I'm not saying this to be an ass or anything like that it just needs more structure dev or not...if I wasn't the dev I would of setup this post properly with changelog some screens and make it look nice you don't have to be a dev to do that.. and it's based on the official samsung rom hmm interesting so what about those tweaks that were suppose to work from the get go? I can add those exact tweaks through magisk and xposed.. it's throwing alot of red flags for me and so many questions so I'm just gonna wait for some progress before I touch this..I've been in the custom rom game since my galaxy s5..
Why can't the dev just make the post in the proper section??? Why do we need to communicate through you as some sort of lawyer or something?
Doomer231 said:
Why can't the dev just make the post in the proper section??? Why do we need to communicate through you as some sort of lawyer or something?
Click to expand...
Click to collapse
That's what I find strange aswell
Doomer231 said:
Why can't the dev just make the post in the proper section??? Why do we need to communicate through you as some sort of lawyer or something?
Click to expand...
Click to collapse
the only reason this ''rom'' exists is because @Ubimo donated a phone to whoever would produce the rom he wanted, which was OneUI based.
I won't say anyone has been dishonest, maybe it was a tougher task than the dev anticipated or personal life time pressure meant it was difficult to get work done on it.
I will say I don't think Ubimo got his monies worth and maybe the phone should morally get given back. more so if the dev doesn't want to stand behind his work and even comment in this thread.
if the phone was in the hands of someone like Andy Yan or Phhusson we'd have amazing GSI roms fully working for this phone and real buzz going in this tragic forum.
Ubimo said:
The "developer" seems to have a played a cruel joke on us
Click to expand...
Click to collapse
This seems like the stock rom was just repacked into different segments and given out as a custom rom to flash. I really think this is a joke as a rom and the person who donated the phone towards development, i just feel sorry for them.
Update:
@fivanbe now starts working on the custom ROM and hopes to publish this ROM in a few days.
Related
New version uploaded, compiled on November 1. Latest CM changes, latest hardened kernel, enabled dock settings for OEM dock (see /settings/sound), dynamic system bars., added CMFile Manager. Many minor fixes.
Download link:
http://d-h.st/1xC
____________________________________________________________________________________
I am new to Z1, but have a lot of experience developing for Xperia ION.
Let me introduce to you my new rom, which is based on Cyanogenmod 11/KitKat 4.4 and DarkCm Projects. The rom was built on October 18 from latest sources.
MAIN AND UNIQUE CHARASTERISTCS:
1. Hardened Kernel with the following features:
a. Selinux disabled (don't trust them) and APPARMOR enabled as main security
b. All crypto core features enabled
c. All authenticated encryption modes enabled - CCM, GCM and SEQIV
d. All blocks enabled - CBC, CTR, CTS, ESB, LRW, PCBC and XTS
e. All hash modes enabled including SHA512 and others
f. All ciphers enabled including CAMELIA, TWOFIS, ANUBIS, SALSA20 and others
g. Compression - DEFLATE, ZLIB and LZO
h. Random number generation all options enabled to result in a better generation without CPU wakeups
2. Newest Sony proprietary blobs (published just several days ago) included
The rom feels fluid and smooth.
By the way, the boot image (kernel + CWM recovery) that is inside the zip file could be used with any CM11 rom, as long as your custom rom does not feature any non standard kernel modules...
CREDIT: Cyanogenmod, AOSP, Slimkat and DarkCM team. Especially big thanks to DarkCM team as most customizations were forked from their repositories
WARNINGS:
I am not responsible for your device becoming a paperweight. I am also not responsible for death and destruction caused by your flashing this rom on your device. You are at your own perill. Complain to Putin - he will surely help. :laugh:
INSTRUCTIONS
1. Unlocked Bootloader
2. If you have CWM, go to mounts and storage and wipe System/Cache/Data
3. If you have TWRP, go to advanced wipe and wipe System/Cache/Data
4. Flash the rom and reboot.
5. I recommend that you delete Cyanogenmod original animation as it slows down the boot significantly: without it your boot should take about 25 seconds. Once you remove bootanimation.zip in /syste/media, you will have a nice vanilla android bootanimation.
6. Enjoy the rom and hit Thank You or perhaps Donate?
P.S. Rom is in Download Section above
XDA:DevDB Information
Black Argon, ROM for the Sony Xperia Z1
Contributors
optimumpro
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP, CM, Slimkat
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2014-10-18
Created 2014-10-19
Last Updated 2014-11-01
Reserved
e30luismi said:
me downloading and test
Click to expand...
Click to collapse
Donde encontraste el link para descargar
MOD EDIT Translation
Where you found the link to download
Please post in the English language and use google translate if you need
Por favor, publique en el idioma Inglés y usar traductor Google si necesita
Source code ?
e30luismi said:
me downloading and test
Click to expand...
Click to collapse
Poor dev. Minutes after a new rom is published, the trolls are rising.
avirale123 said:
Donde encontraste el link para descargar
Click to expand...
Click to collapse
Read the damn OP, klick on the fu**ing download section and stop spamming in Spanish. If you wanna chit chat use PM.
:good: Great ! No Issues for now....
SoundPacks = Work
Apps to SD = Work
Cam = Work
smooth and fast since first boot.... testing few days, looks realy good
Thanks optimumpro
Welcome! I remember your roms from the ion...good work you did there!
awesome really nice and speed rom, all work good and no bug here for now
testing for some days and report
zhuoyang said:
Source code ?
Click to expand...
Click to collapse
Just look at download page. I haven't put in kernel changes online yet, because unfortunately the regular linux .config file is hidden in multiple files in android and only generated during the build. So, to save time, I tricked the "brunch honami" script by inserting my .config file during build.
avirale123 said:
Donde encontraste el link para descargar
Click to expand...
Click to collapse
link arriba donde pone downloads
MOD EDIT Translation
link above where it says downloads
Please post in the English language and use google translate if you need
Por favor, publique en el idioma Inglés y usar traductor Google si necesita
Bro you can release this but you need change anything add or delete a feature because if you will continue release the same changes from DCM you can't fork our work and only change the name's rom .....
Regards
davidteri91 said:
Bro you can release this but you need change anything add or delete a feature because if you will continue release the same changes from DCM you can't fork our work and only change the name's rom .....
Regards
Click to expand...
Click to collapse
Hey. The main changes to the rom were in kernel and sony blobs. Those are clearly unique and so far only in this rom. I gave you credit for everything else...
If you insist, I will sync the subsequent releases directly from Cyanogenmod
Regards
Link ?
link?!
7sen said:
Link ?
Click to expand...
Click to collapse
Now, let me understand: what link are you referring to? Download link? If you read the OP, it clearly says, go to Download Section in the title of the first post. This is where the rom sits. Or you were referring to something else. Help me out, brother?
I have problems with CWM
Backup of DarkCM I could not import
I had to flash the boot.img of DarkCM
Henry2o1o said:
I have problems with CWM
Backup of DarkCM I could not import
I had to flash the boot.img of DarkCM
Click to expand...
Click to collapse
You mean you could not restore data with CWM? That's not recommended, as it could lead to instability. You should use Titanium to restore apps, as opposed to restoring the whole data partition with CWM.
starting point: DarkCM v7
backup DarkCM v7 with CWM
then full wipe
Tested Black Argon CM11
wanted DarkCM of backup restore with CWM
SD card not found
DarkCM boot.img flashed
Recognized SD card in CWM
restored DarkCM v7 form Sd card
???
Henry2o1o said:
starting point: DarkCM v7
backup DarkCM v7 with CWM
then full wipe
Tested Black Argon CM11
wanted DarkCM of backup restore with CWM
SD card not found
DarkCM boot.img flashed
Recognized SD card in CWM
restored DarkCM v7 form Sd card
???
Click to expand...
Click to collapse
I don't have this problem. There were no changes in cwm, as compared with DarkCM. I can see both cards in CWM. I generally don't like CWM. Will try to get TWRP in next release.
optimumpro said:
I don't have this problem. There were no changes in cwm, as compared with DarkCM. I can see both cards in CWM. I generally don't like CWM. Will try to get TWRP in next release.
Click to expand...
Click to collapse
TWRP also like better
CWM with Black Argon
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
with DarkCM it works
Gesendet von meinem D6503 mit Tapatalk
This is a new update firmware made by me with my 6045Y OTA update
I don't made any modifications to system partition, no root, no debloat, it's a virgin update.
Please, don't mod or share without my permission !
Langage included: Catala, Deutch, English US and UK, Espanol, Euskara, Francais, Galego, Italiano, Magyar, Nederland, Portugues, Romana, Turkce, Arabe ? (can't read).
Instructions:
- You have to install it with TWRP and doing a wipe data/cache
- Reboot and that's all
Bugs: nothing - all fixed on EU4
New build 100% Europe EU4
Y7VGAZ60BG00
6045Y 6.0.1 Europe EU4This version is identical as Alcatel One Touch version, no modifications
>> Download it here <<
>> Fix for previous versions <<
++++++++++++++++++++++++++++++++++++++++++++
6045Y 6.0.1 Europe EU4.2Based on EU4
Rooted (by script) forced to systemless
Debloated
Xposed Installer LP-MM - You can install Xposed Framework directly with this app and manage modules
** xposed framework are not installed by default **
Battery friendly
Multi-Window ready (you have to enable it in developpment)
QuickBoot
>> Download it Here <<
-----------------------SCREENSHOTS
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Enjoy :silly:
murigny64 said:
Happy to begin festivities !This is a new update firmware made by me with a Mobile Upgrade Q extraction and some files (boot blocks and modules) from US update
I don't made any modifications to system partition, no root, no debloat, it's a virgin update.
TWRP is not deleted by update, so you can root after install and 1st boot !!
Please, don't mod or share without my permission !
Instructions:
- You have to install it with TWRP and doing a wipe data/cache
- Reboot and that's all
Bugs: nothing at all for me but probably PIN code method issue with lock schem
Download it here: https://mega.nz/#!CUlyxKDY!Sd3QwwVXIq73BGY1iegB35PvfpTCT7Xv6fWLXZ1ljV4
Enjoy :silly:
Click to expand...
Click to collapse
Good job as always Best
So, can we use this zip and we won't lose recovery?
Edit:
Sorry, sorry, forget it xd i have readed the OP again
Edit2:
Does this zip have official spanish language?
Now i'm on alekOS rom, are the steps the same to install it, or must i do something else?
Enviado desde mi 6045X mediante Tapatalk
TheWolfer22 said:
Now i'm on alekOS rom, are the steps the same to install it, or must i do something else?
Enviado desde mi 6045X mediante Tapatalk
Click to expand...
Click to collapse
It's on 1st post:
Instructions:
- You have to install it with TWRP and doing a wipe data/cache
- Reboot and that's all
builderkage said:
So, can we use this zip and we won't lose recovery?
Edit:
Sorry, sorry, forget it xd i have readed the OP again
Edit2:
Does this zip have official spanish language?
Click to expand...
Click to collapse
Look at 1st post
This is a new update firmware made by me with a Mobile Upgrade Q extraction and some files (boot blocks and modules) from US update
Click to expand...
Click to collapse
so how could it be EU?
keyra74 said:
so how could it be EU?
Click to expand...
Click to collapse
all system EU, modem EU , only aboot and boot are US
alright
i'll wait for it to be modded or to know if it really change something from the full us
keyra74 said:
alright
i'll wait for it to be modded or to know if it really change something from the full us
Click to expand...
Click to collapse
Modded for what? You don't believe me ?
murigny64 said:
Modded for what? You don't believe me ?
Click to expand...
Click to collapse
haha u misread me.
i just wanted to see if it really change something from the US version i already have on my french phone
keyra74 said:
haha u misread me.
i just wanted to see if it really change something from the US version i already have on my french phone
Click to expand...
Click to collapse
In french only for you:
Je peux te garantir que tu seras satisfait, notamment concernant la 4G qui marche nickel et la langue francaise est vraiment bien integrer.
Je l'utilise actuellement, le seul petit souci concernant la methode de verrouillage (PIN, schema, mot de passe) qui ne fonctionne pas sur l'ecran de verrouillage. Il suffit de laisser sur "balayage". Pour tout le reste, c'est zero defaut. Tu peux tester sans souci.
thx for the reply i won't use french to answer thou since we're on a us forum.
i have no problem with 4G on freemobile and i don't use any lockscreen so for now i don't see why i would change to this one.
thx anyway
keyra74 said:
thx for the reply i won't use french to answer thou since we're on a us forum.
i have no problem with 4G on freemobile and i don't use any lockscreen so for now i don't see why i would change to this one.
thx anyway
Click to expand...
Click to collapse
My build is more recent (apps and libs) but it's your choose. Update: new boot version EU !
Ok i ll nandroid backup and test
Envoyé de mon 6045I en utilisant Tapatalk
Problem on EU2: wind IT sim does not work, now i will try with EU3
MtDNA said:
Problem on EU2: wind IT sim does not work, now i will try with EU3
Click to expand...
Click to collapse
What is wind IT sim ? EDIT: ok, Italian carrier provider
Hello
New version EU4 is up
changelog: lockscreen security issue fixed
There is a fix for previous version too
:good:
how long should it take to install.
stuck on this file as no md5 blablabla since more than 10 min
nevermind my transfert was corrupted
optimizing apps now
keyra74 said:
how long should it take to install.
stuck on this file as no md5 blablabla since more than 10 min
nevermind my transfert was corrupted
optimizing apps now
Click to expand...
Click to collapse
Don' take care about md5 checksum, it's flashing correctly.
Flash process is about 10mins and 1st boot is about 5mins, like other MM roms (alekos, dallascz).
MIUI 9 by xiaomi.eu for Nubia Z17 (Android N)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
MIUI (which stands for Mi User Interface and pronounced "Me You I", a play on the common abbreviation of the words user interface as UI), developed by Xiaomi, is a stock and aftermarket firmware for smartphones and tablet computers based on the Google Android operating system. MIUI includes various features such as theming support
Disclaimer: This ROM has been tested and verified to be stable for daily use but there may be still some unknown bugs. I am not responsible for any damage to your device or your data
Features
- Xiaomi.eu base ROM
- Magisk integrated
- DoubleTap2wake
- Some other little optimizations...
Download Links
- ROM:
GDrive: https://drive.google.com/open?id=1flBvAV4MezbEEIcCg7YlPyqtlx_sEZWm
MEGA: https://mega.nz/#!4IJUzDoL!Le-KG1EFiC6yOszG-PvCgDosLRJOWp37qonqb4OCcD8
Yandex: https://yadi.sk/d/YspL9VPM3SgDK8
- BT audio patch: https://drive.google.com/open?id=1aMXg2rU62O4HEt4Nxd76iWG1UWbFq50-
Known Bugs
- NFC not working.
- Brightness is a bit low when using NubiaCam.
- BT car/headset audio doesn't work.
- You tell me...
Screenshots
...
Installation
1. Boot into TWRP recovery
2. Wipe Data, Cache & Dalvik
3. Flash the ROM.
4. Reboot.
It has a little bug with battery drain, but you can solve it by doing this:
1.- Enable developer settings by pressing Miui version.
2.- Go to Additional settings>Developer options.
3.- Disable MIUI optimization at the bottom, reboot and re-enable it and reboot.
With this trick you will have a lot better battery life.
CREDITS:
- Xiaomi.eu team for modding Global ROMs.
- Chinese version's dev.
- Thanks to Seraish, Stefano and Miguel for Yandex, GDrive and MEGA mirrors.
Base ROM: https://tieba.baidu.com/p/5545916870?pn=0&
You can buy me a drink if you like my work and you want to support it
Thanks for your contribution to Z17.
Thanks <3
Thanks a lot for this rom!
Regarding the BT patch, does this need to be installed before flashing the rom or after?
enforcermoh said:
Regarding the BT patch, does this need to be installed before flashing the rom or after?
Click to expand...
Click to collapse
After
Mobstergunz said:
After
Click to expand...
Click to collapse
Thanks, just tested the BT and it works great in my car. I tried to do the MIUI Optimalization trick but the option does not seem available in the additional settings. Have you guys been able to find it? Seems like there are no developer options at all.
good job !
thanks
Thanks
It's just the best Rom that exists for Nubia z17.
Thank you so much for your work. I say that after having tested almost all available roms :good:
First day usage results
So after my first day of use, here a small report of my findings:
- Bluetooth is working perfect, maybe even better than the ROM the Geekbuying Z17 version shipped with
- The speed of the phone is insane on this ROM, all animations are super smooth. As addition to that, the AnTuTu score of my device went up from 160.000 to 210.000. Thats an absolutely insane improvement. Guess the other ROM was full of bloat ware
- The touch screen is a little too sensitive on the edges on this ROM. Often I find myself accidentally activate apps or buttons. The most practical fix is to hold the phone in a different way. But maybe a setting for this available or a flashable zip?
- Most apps i install complain about wanting rights for NFC, my guess this is related to the NFC being bugged at this time. Still would be nice if we can somehow suppress this rights request.
- I have not find any clues of this ROM draining the battery. I lost only 2% after a complete night of sleep.
So overall I can say I'm amazed by your work Arceoxis! Still a few small things to fix, but for day to day use I think this ROM can be the game changer.
gapps? btaudio_patch?
Is this rom gapps included? I guess it will be necesary to flash it, in that case is Android 7.0 or 7.1?
Has the btaudio_patch to be flashed after flashing the rom?
Thanks
SegundaC said:
Is this rom gapps included? I guess it will be necesary to flash it, in that case is Android 7.0 or 7.1?
Has the btaudio_patch to be flashed after flashing the rom?
Thanks
Click to expand...
Click to collapse
Google Apps are included. You can Flash the BT patch after rom flash.
Hi,
i install the New Version Today,and have Problems. After Reboot i got info that the Process com.android.phone or com.android.acore
was stopped (i translate from german,maybee little diffrent).All 1-3s i got new message if klick on it
What is maybee the Problem?
I follow the manuel, and clean Cache/Dalvik. and restart the flash process 10 times now,all with same result..
OK now i Stop the Problem.
Made a mistake with cleaning Cache/dalvik..
There is a new ROM made by SY.
Here is the origin source: http://bbs.zhiyoo.com/thread-13501974-1-1.html
I have upload it to GDrive: https://drive.google.com/open?id=1ad8b_DU2-38k4_SDCjIewDaNF9N9Eh7G
It seems that I do not have the permission to open a new thread in this section. Hope you can post it to let more people know.
Also, hope anyone can port it to OxygenOS.
scwsdhr said:
There is a new ROM made by SY.
Here is the origin source: http://bbs.zhiyoo.com/thread-13501974-1-1.html
I have upload it to GDrive: https://drive.google.com/open?id=1ad8b_DU2-38k4_SDCjIewDaNF9N9Eh7G
It seems that I do not have the permission to open a new thread in this section. Hope you can post it to let more people know.
Also, hope anyone can port it to OxygenOS.
Click to expand...
Click to collapse
u have to be registered to open original forum.:S
how to ınstall thıs new rom ?
ıs ıt muı 9 ?
scwsdhr said:
There is a new ROM made by SY.
Here is the origin source: http://bbs.zhiyoo.com/thread-13501974-1-1.html
I have upload it to GDrive: https://drive.google.com/open?id=1ad8b_DU2-38k4_SDCjIewDaNF9N9Eh7G
It seems that I do not have the permission to open a new thread in this section. Hope you can post it to let more people know.
Also, hope anyone can port it to OxygenOS.
Click to expand...
Click to collapse
What Rom is that?
Guys please only discuss about the MIUI 9 port here and create a new topic for the other ROM
enforcermoh said:
Guys please only discuss about the MIUI 9 port here and create a new topic for the other ROM
Click to expand...
Click to collapse
I failed to open a new thread due to the permission problem, but I really want others to know about the new H2OS. I will delete the reply after somebody done this.
---------- Post added at 04:09 PM ---------- Previous post was at 04:07 PM ----------
sewkanteam said:
u have to be registered to open original forum.:S
how to ınstall thıs new rom ?
ıs ıt muı 9 ?
Click to expand...
Click to collapse
This is H2OS, with some features by SY.
scwsdhr said:
I failed to open a new thread due to the permission problem, but I really want others to know about the new H2OS. I will delete the reply after somebody done this.
---------- Post added at 04:09 PM ---------- Previous post was at 04:07 PM ----------
This is H2OS, with some features by SY.
Click to expand...
Click to collapse
ı ınstalled succes . ıts almost same lıke lıgeonas 15 wıth chınese apps.
Is this based on Nougat 7.x or Oreo 8.x?
I'm asking because if it's 8.x I'd wanna know if bluetooth works...
experiencia con la rom
24h with Miui 9 and everything is perfect, the best one I have had in the phone.
Estaba un poco harto del teléfono después de 6 meses, había tenido distintas roms y ninguna terminaba de estar completamente a gusto como ésta. Un detalle, es la única que puedes apagar el móvil y se enciende solo al programar la alarma, tal como la rom original.
DISCLAIMER:
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, or dead SD cards,
* nuclear war, penguin invasions or that you are getting fired because the alarm app failed.
* before flashing it! YOU are choosing to make these modifications, and if
* If you point your finger at me for messing up your device, I will laugh at you. Hard
*/
Hey there! I know that very few people still have this 2012-era device, and that the stock ROM is (like most low-end devices at the moment) sluggish and REALLY laggy.
As I'm going to sell the device, just wanted to publish he port I've made!
What does work
Wi-Fi
Camera
Sound & Microphone
Graphic acceleration
USB
Sensors
Sd card
What doesn't work
RIL (SIM and such)
Bluetooth
Wi-Fi Direct
DOWNLOADS
TWRP for restoring the ROM (flashable through Odin/Heimdall)
The ROM backup in zip format (DON'T FLASH IT)
READ THIS:
This ROM is a port of the original CM11 built for the Fame by wulsic.
This ROM isn't a common flashable ZIP, as the patches I did in order to make it work were applied in the system itself. It may be possible to make a flashable zip form this, but meanwhile I will publish it as a TWRP backup.
PLEASE INSTALL TWRP BEFORE DOING ANYTHING ELSE, without it you can't restore the ROM backup.
The ROM is in Spanish language by default, so to set it back to English go to Settings icon at launcher, then the "Idioma e introducción de texto" section, tap "Idioma" and select English.
The ROM includes some gapps (as they need to be modified in order to work nicely)., If I need to remove them please contact me!
ADDED THINGS
Xposed Framework installed and running
GravityBox
XuiMod
Service Disabler (for making google play services usable on low end devices like this)
At developer settings, some options are enabled by me (like Show touches or Stay awake while USB connected). Disable them if you want.
The ROM includes Xposed just for some animations and GravityBox, you can disable most things at their respective modules (for animations disable XuiMod and for quick action tweaks and RAM bar in recents disable GravityBox). Those mods seemed to produce almost no lag so I did keep them.
HOW TO INSTALL THIS BACKUP
As I've said before, this ROM is a TWRP backup, so in order to install (restore) it you need to do the following steps:
Unzip the file and put the 4204134ec2ea3100 folder at /emmc/TWRP/BACKUPS (if BACKUPS folder doesn't exist create it) so the path looks like /emmc/TWRP/BACKUPS/4204134ec2ea3100/
Go to TWRP's main menu, select Restore and select the cm11-nevisvess-backup entry.
Iif it asks you for which partition restore, select ALL of them. They all are important (without data the system may not boot cause of xposed, for example).
After restoring everything, restart the phone. It should boot and you will get to the unlock screen (system done)
Credits:
Cyanogenmod for the base ROM
All fame devs as they work is the ground I'm building upon
The base ROM link, there's more info (like sources): https://forum.xda-developers.com/galaxy-fame/rom-cyanogenmod11-t2897673
The guy who published a surprisingly working way to port the ROM: https://www.htcmania.com/showthread.php?t=1161445
Screenshots:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hola!! Gracias x el desarrollo! No hay nada parecido para este celular! Tengo un problema con la red movil. sera un problema de IMEI? que solución podria darla.
desde ya muchas gracias
Greetings!
I am trying to get a degoogled smartphone. Would you please upload a GApps-less version of this TWRP backup ROM?
Thanks.
galaxyfame said:
Hola!! Gracias x el desarrollo! No hay nada parecido para este celular! Tengo un problema con la red movil. sera un problema de IMEI? que solución podria darla.
desde ya muchas gracias
Click to expand...
Click to collapse
Please write in english, and read forum rules... (por favor escribe en inglés y lee las reglas del foro)
Check at settings->about phone->status if it recognizes your IMEI, if not you may need to flash modem with Odin
NotHereToStay said:
Greetings!
I am trying to get a degoogled smartphone. Would you please upload a GApps-less version of this TWRP backup ROM?
Thanks.
Click to expand...
Click to collapse
You can just check the opengapps package for APK file names, and delete them from /system/app or /system/priv-app.
Yes, the libraries will stay here but they can´t do much without the apps that manage them.
Anyway, I don't have the phone anymore, else I would upload such a modified version! Sorry
MLX said:
You can just check the opengapps package for APK file names, and delete them from /system/app or /system/priv-app.
Yes, the libraries will stay here but they can´t do much without the apps that manage them.
Anyway, I don't have the phone anymore, else I would upload such a modified version! Sorry
Click to expand...
Click to collapse
The OpenGApps package weighs a lot (100 KBps download speed by the way).
Can I use something like this instead? https://github.com/ANDROID2468/Remove-Gapps
EDIT: TWRP boots, but the touchscreen does not work. My device is GT-S6790L. Is that the reason why it does not work?
I thought this was a regular ROM, and I do not know where to get the original recovery ROM now.
EDIT 2: This guy's stock recovery worked. https://forum.xda-developers.com/t/q-galaxy-fame-lite-cwm-twrp.2779754/ God knows if this does something bad on the phone, but it seems to be exactly the same.
NotHereToStay said:
The OpenGApps package weighs a lot (100 KBps download speed by the way).
Can I use something like this instead? https://github.com/ANDROID2468/Remove-Gapps
Click to expand...
Click to collapse
It may work, never tested and can´t guarantee anything.
NotHereToStay said:
EDIT: TWRP boots, but the touchscreen does not work. My device is GT-S6790L. Is that the reason why it does not work?
Click to expand...
Click to collapse
Strange, mine was also a 6790L and it worked just fine. Did you change the touchscreen at any time? (It should work anyway).
NotHereToStay said:
EDIT 2: This guy's stock recovery worked. https://forum.xda-developers.com/t/q-galaxy-fame-lite-cwm-twrp.2779754/ God knows if this does something bad on the phone, but it seems to be exactly the same.
Click to expand...
Click to collapse
That guy just uploaded his stock recovery, that's not a problem. Anyway, I'm confused with TWRP not working for you, IDK what the problem is...
MLX said:
It may work, never tested and can´t guarantee anything.
Strange, mine was also a 6790L and it worked just fine. Did you change the touchscreen at any time? (It should work anyway).
That guy just uploaded his stock recovery, that's not a problem. Anyway, I'm confused with TWRP not working for you, IDK what the problem is...
Click to expand...
Click to collapse
I do not know if people changed the smartphone's touchscreen. It is an old smartphone from my grandma I am trying to fix (bootloop, I am privacy-conscious).
We live in Venezuela, so I think our stock ROM is the NBS (South American).
I would really like this ROM to be repackaged into a flashable ZIP, though. That would be so awesome.
NotHereToStay said:
I do not know if people changed the smartphone's touchscreen. It is an old smartphone from my grandma I am trying to fix (bootloop, I am privacy-conscious).
Click to expand...
Click to collapse
Okay then, anyway (as said) touchscreen should not be an issue...
NotHereToStay said:
We live in Venezuela, so I think our stock ROM is the NBS (South American).
Click to expand...
Click to collapse
I'm also Latin American, so we can talk better via PM if you want (in spanish)
NotHereToStay said:
I would really like this ROM to be repackaged into a flashable ZIP, though. That would be so awesome.
Click to expand...
Click to collapse
Sorry, as said I dont have the device anymore so I can't try doing so, however you should be able to install the ROM via ADB (using the console and ADB). Send me a PM for more details if you want to follow this way.
MLX said:
Okay then, anyway (as said) touchscreen should not be an issue...
I'm also Latin American, so we can talk better via PM if you want (in spanish)
Sorry, as said I dont have the device anymore so I can't try doing so, however you should be able to install the ROM via ADB (using the console and ADB). Send me a PM for more details if you want to follow this way.
Click to expand...
Click to collapse
I thought about it more carefully. I may or may not have accidentally discovered that the thing has the touchscreen broken.
I think it will be pretty complicated and time consuming for me to manually remove the GApps by myself and will probably regret the results if I accidentally delete stuff.
Does anybody have a debloated (includes degoogling) version of this ROM? This is giving me a headache. Almost literally, the back of my eyes hurt.
MLX said:
Screenshots:
Click to expand...
Click to collapse
Can this work with sim cards and data? (Claro argentina)
Ezet uwu said:
Can this work with sim cards and data? (Claro argentina)
Click to expand...
Click to collapse
Nope, sadly I never got it to work
Hello community, I really need your help, I searched for hours but couldn't really find an answer and a simple tutorial. To explain to me step by step
I have just acquired an OP 9Pro LE2127, it is in TMobile version 11.2.3.3 LE5ACB
I want to flash it completely to see the phone put in EU or GLOBAL version.
Is someone available to help me.
The phone is unlocked from the T-MOBILE application.
Thank you very much for your help.
tom78610 said:
Hello community, I really need your help, I searched for hours but couldn't really find an answer and a simple tutorial. To explain to me step by step
I have just acquired an OP 9Pro LE2127, it is in TMobile version 11.2.3.3 LE5ACB
I want to flash it completely to see the phone put in EU or GLOBAL version.
Is someone available to help me.
The phone is unlocked from the T-MOBILE application.
Thank you very much for your help.
Click to expand...
Click to collapse
Took about a 10 second search in Bing.com.......
https://forum.xda-developers.com/t/...7-to-eu-via-msm-no-unlock-bin-needed.4272837/ and
[GUIDE] Complete Step-by-Step Convert T-Mobile to Global (or other) firmware
*** Use this at your very own risk. *** You will lose all data *** Backup your working modem and persist, just in case. *** USE USB 2.0 Port and Windows Machine !!! BEFORE YOU CONTINUE, POST #3 CONTAINS AN IMPORTANT MESSAGE SPECIFICALLY FOR...
forum.xda-developers.com
Thank you, for this precious help, I see, but from what I see, I will always have to do some manipulation after making an update?
tom78610 said:
Thank you, for this precious help, I see, but from what I see, I will always have to do some manipulation after making an update?
Click to expand...
Click to collapse
Maybe, maybe not. Only one way to find out! I find staying with original stock firmware is less hassle or better yet, hassle free! Just a thought!
TheGhost1951 said:
Maybe, maybe not. Only one way to find out! I find staying with original stock firmware is less hassle or better yet, hassle free! Just a thought!
Click to expand...
Click to collapse
I'm looking for a phone with an original OnePlus rom without T-Mobile overlay
TheGhost1951 said:
Took about a 10 second search in Bing.com.......
https://forum.xda-developers.com/t/...7-to-eu-via-msm-no-unlock-bin-needed.4272837/ and
[GUIDE] Complete Step-by-Step Convert T-Mobile to Global (or other) firmware
*** Use this at your very own risk. *** You will lose all data *** Backup your working modem and persist, just in case. *** USE USB 2.0 Port and Windows Machine !!! BEFORE YOU CONTINUE, POST #3 CONTAINS AN IMPORTANT MESSAGE SPECIFICALLY FOR...
forum.xda-developers.com
Click to expand...
Click to collapse
That guide pertains to the OnePlus 8. Are we assuming it works for the 9 Pro as well?
DaveImagery said:
That guide pertains to the OnePlus 8. Are we assuming it works for the 9 Pro as well?
Click to expand...
Click to collapse
That guide in the first link is for the 9 pro
I had thought to read somewhere that the L2127 were different in terms of partitions. A real pain to have a mobile operator phone
DaveImagery said:
That guide pertains to the OnePlus 8. Are we assuming it works for the 9 Pro as well?
Click to expand...
Click to collapse
My bad, point I was trying to make is it only takes less than a minute to search for what you are looking for through Google or Bing. Just add XDA at the end of your search criteria. Not hours or days.....
tom78610 said:
I had thought to read somewhere that the L2127 were different in terms of partitions. A real pain to have a mobile operator phone
Click to expand...
Click to collapse
It's not a big pain brother. Follow the Tmo->Eu MSM guide posted in the first link above. I'm on le2127 Tmo as Eu and everything is fine/normal. Following that guide above (https://forum.xda-developers.com/t/...7-to-eu-via-msm-no-unlock-bin-needed.4272837/)
The steps are laid out. Except #4, you don't have to be sim unlocked, you can use another tool to enable oem unlock toggle if necessary.
What step or steps are you getting stuck at? Don't be overwhelmed, it's pretty straightforward
Hello, after verification, it seems that my bootloader is locked, when I perform an unlock, I am asked for a token.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
tom78610 said:
Hello, after verification, it seems that my bootloader is locked, when I perform an unlock, I am asked for a token.View attachment 5772393View attachment 5772409
Click to expand...
Click to collapse
If you use the Tmo-eu msm tool, it will bypass the need for the token.
If you wish to stay on tmobile firmware and root/unlock bootloader, you will need to submit your imei, serial and unlock code to OnePlus.com/unlock_token - it will take one week to get the file back.
If you're planning to go to eu, global firmware, or custom rom, you don't need to do that. Just do the Tmo->eu msm tool and unlock the bootloader traditionally from there
Appreciative said:
If you use the Tmo-eu msm tool, it will bypass the need for the token.
If you wish to stay on tmobile firmware and root/unlock bootloader, you will need to submit your imei, serial and unlock code to OnePlus.com/unlock_token - it will take one week to get the file back.
If you're planning to go to eu, global firmware, or custom rom, you don't need to do that. Just do the Tmo->eu msm tool and unlock the bootloader traditionally from there
Click to expand...
Click to collapse
Oh thanks, now I understand why it didn't work. I had the wrong software version. I will try tomorrow and let you know
I don't understand anything anymore,
tom78610 said:
I don't understand anything anymore, View attachment 5773769
Click to expand...
Click to collapse
I do. Try again and uncheck sha256 check and check use lite firehose and do your research instead of trying to have everything handed to you. If you did a search on your own, you would have found this tool on your own.
TheSayaMan said:
Je le fais. Essayez à nouveau et décochez la case sha256 et cochez la case use lite firehose et faites vos recherches au lieu d'essayer de tout vous remettre. Si vous aviez fait une recherche par vous-même, vous auriez trouvé cet outil par vous-même.
Click to expand...
Click to collapse
Thank you for this precious help. I obviously understand that I have to search on my own, in fact that's what I've been doing for almost a week.
So you can imagine that if I ask for help it means that I find myself in a dead end. And I've tried a lot of things that don't work.
So I think you can understand a minimum
tom78610 said:
Thank you for this precious help. I obviously understand that I have to search on my own, in fact that's what I've been doing for almost a week.
So you can imagine that if I ask for help it means that I find myself in a dead end. And I've tried a lot of things that don't work.
So I think you can understand a minimum
Click to expand...
Click to collapse
I understand, it's just there are many that ask questions, not you, that were already asked and it gets frustrating when someone has to repeat themselves. I don't mind helping at dead ends. I have gotten help so I don't mind helping others. Is this the tool your using? https://forum.xda-developers.com/t/...7-to-eu-via-msm-no-unlock-bin-needed.4272837/
TheSayaMan said:
Je comprends, c'est juste qu'il y en a beaucoup qui posent des questions, pas vous, qui ont déjà été posées et ça devient frustrant quand quelqu'un doit se répéter. Cela ne me dérange pas d'aider dans les impasses. J'ai obtenu de l'aide donc ça ne me dérange pas d'aider les autres.
Click to expand...
Click to collapse
of course i understand,
You might be using the wrong tool. You need this one. https://forum.xda-developers.com/t/...7-to-eu-via-msm-no-unlock-bin-needed.4272837/
I think I see what's confused him. In the conversion thread, the first link is to download stock MSM tools. Ignore those for now and download the conversion package as pictured below.