Trying to get these 2 paired. But with no luck. Bluetooth connection no issue but there is no control on the phone. Initial setup has no problem but at the last stage using the USB activator to bypass the Black Shark mapping setting cannot be activate. Instead a green light to finish installing it came out a slow blinking green light.
I tried it on Samsung Note 8 with no issue.
Have any of you guys out there using this pair? Able to work?
Pls advice. Thanks.
Related
Hi, I just like to share my experience with problem connection my Galaxy S3 to my 2nd new Samsung Allshare cast dongle. As you can see, I have two Samsung Allshare cast dongles. One in the bedroom, the new one for the sitting room. The first one was bought long time ago and had been working fine. Got latest ME29 firmware. Connection is fast and no problem at all. Now, the price of this dongle has dropped so I proceeded to get myself another one for the sitting room, saving me unplugging it and plugging it, etc.. The new one has the JB version of firmware. The phone detected it without any problem but it kept on showing failed to connect message almost instantly when I tapped on the detected device on the touch screen. This is how I have ended up here at this website. After hours of reading, stock.rom, custome.rom, .pdk, etc.. I was still getting nowhere. But I don't know why. I kept on seeing in my head the blue LED showing on the dongle. Well, stupid of me, I had thrown away the packaging and with it the manual. So, I tried to download it from Samsung website. There is nothing about this dongle on the UK Samsung support website. From my experience with other worldwide hardware companies, so I tried Samsung support website in other countries. And I found a customer commented on another customer's query. So, here is the solution for those people with connection problem after updating the dongle's firmware to ME29. No harm to try this before going down the custom rom route.
After updating the firmware of the Allshare cast dongle, (by the way, my S3 has the latest jelly bean on), it will say Allshare is closed. At the same time, the red LED that was flashing would be solid red now (not flashing). Unplug the power (miniUSB) from the dongle, count to 10 and plug it back. The dongle should be showing a solid red LED now. Press and hold the button at the back of the dongle for about 15 seconds and the red LED should be flashing now. At this point, you can restart your phone just in case. Or just disable the WiFi and then enable it on your S3. Now, go to the dongle, press and hold the button for one or two seconds, the flashing red LED will change to solid BLUE. Now, go to your S3, turn on AllShare. It will detect the dongle. Tap on the detected device on your S3..... lo and behold....it connects!!!!!! Just to repeat, I have not downloaded or mod my S3 in anyway.
The blue LED is only for use in the very first time of connection. So, I guess updating the firmware constitutes a "first time connection" condition. I hope this information help. Good luck all.
What app is used to update dongle? Sorry if this is a NOOB question. ..
Hi,
I have not been able to find an app either on the Google play store or the Sammy app store to upgrade firmware.
The version shown is LJ02. But I seem to have constantly re - pair every time I try to use it.
Help on the firmware elsewhere on the forums someone mentioned there was a better device now (linksys dlink? I don't remember)
TIA - Thanks in advance
Frank
I've got a note 2, running 4.4.2, a note pro 8.4 running 4.4.2, and an asus win7 computer
i can run sidesync on the pc, connect the note via usb or wifi, and get keyboard/mouse sharing working just flawlessly
as soon as I attempt to do screen sharing, the note2 goes black (which it should) but the virtual phone just loads endlessly, and eventually times out. doesn't matter wifi or usb
if I launch sidesync on the tablet, and then the phone, the tablet see's the phone and attempts to make the connection. phone goes blank, and virtual phone just eventually times out, just like on the pc
has anyone gotten this working on the note 2? is there a specific version that works?
so, 5 minutes after the post, there's windows update notification, and the update is related to samsung USB driver update
do the update, reboot, and holy jebus, screen sharing works!
sorta
now I get connection (usb and wifi work) and I can see the screen mirrored. the phone screen does not black out, but I can't interact with it either. on the pc, I can see the mouse icon turn from spinny blue thing, to solid blue donut, but it does't interact with the phone. I can click the home, back and menu buttons on the bottom of the virtual phone, and they work, but nothing else does
bleh
any ideas?
Hi, I am having issues with using a xbox 360 pad with my galaxy tab s 10.5 with an OTG cable. I am trying to use limelight game streaming and the OTG/xbox 360 pad works pefectcly on my nexus 10. However when I connect it to my galaxy tab s 10.5 it just keeps blinking and never stops blinking and chooses a user slot on the controller. (the ring of 4 lights around the xbox button usually blinks a couple times then selects player 1 top left corner on my nexus 10, it never does this and keeps blinking on the galaxy tab s 10.5)
anyone have any idea why and how i might fix this? its standard OTG stuff I thought and support is baked into android I thought, so did samsung remove this support for some reason?
thanks
The Tab S doesnt provide enough power to the 360 controller to allow it to work, having tried , myself and had the same issue!
yep sadly no go here either, just keeps blinking
lynxblaine said:
The Tab S doesnt provide enough power to the 360 controller to allow it to work, having tried , myself and had the same issue!
Click to expand...
Click to collapse
Thanks guys, thankfully the amazon fire tv bluetooth controller I got in the mail today is working.
Hello everyone,
I love my Zenfone 2 Z00A, me and my girlfriend, both have one. I need help with both of them. We bought a car that comes with a multimedia sound system, witch in cludes a display that is both compatible with IOS and Android. My problem is that neither my Zenfone 2 Z00A running Lineage OS (last weekly build 27/01/18), nor my girlfriend´s Zenfone 2 Z00A running stock 6.0 android, can´t mirror our screen in the device. The audio system is a DD2026 Hansei model.
I´ll run the steps so that anyone can plz tell me what else can I try.
1 - Enable USB debugging in phone settings.
2 - Activate the mirroring function in the car display.
3 - Connect the USB cable
4 - My phone asks to permit the USB debugging, and I say yes.
5 - On the screen a message telling that the connection is starting gets a green arrow indicating that the conection happend.
6 - In the cellphone the app easyconnection opens automatically.
7 - The car display freezes in a screen that says "Please autorize the instalation of cellphone internet service in the cellphone". This message keeps blinking and nothing else happens.
What makes me mad is that I tried with my sister in law MOTO G4 and after the step 5 the screen in the car just changes to mirror her MOTO G4 screen. In her phone, the message indicated above do not blink while the connection is happening.
What can be happening that permits the conection between the car and the phone, but then don´t complete the connection? Anybody has a clue? I´ve been trying every change possible in settings and can´t make it work.
Please Help
hi guys i need your help regarding nubia red magic earbuds as the left and right not working together and appear s in bluetooth 2 times and if one is work the other one not working even in red magic 6 pro the same issue i tried ti rest in many times but nothing happened... so any way to solve this ? thanks guys