Hi to all...
I have found that changing bootlogo has 3 ways:
1)param.bin
2)initlogo,logo.bin
3)model.rle at /
Our Gio has the bootlogo in /GIO.rle so to edit it, you have to extract boot.img of your favorite rom by android image kitchen and replace it by micro fire tool and repack it and then flash it via recovery.Please note that flashing boot image via apps will not affect.
It's a quick guide for flashing custom ROMs, especially for Android 10
Files to download
Recovery img
https://androidfilehost.com/?fid=4349826312261779448
Recovery zip
https://sourceforge.net/projects/shrp/files/laurel_sprout/
Flashing guide
If you're coming from stock android 9, flash android 10 in both slot a & b,
1. For flashing android 10, follow this guide
https://forum.xda-developers.com/mi-a3/how-to/guide-how-to-flash-stock-recovery-rom-t4078773
Note : If you're already on android 10, skip step 1
2. Flash recovery IMG
fastboot flash boot SHRP_v2.2_laurel_sprout.img
3. reboot to recovery by pressing power & volume up key for 5-10sec
4. Wipe data/factory reset in SHRP recovery
5. flash ROM zip and SHRP recovery zip
6. reboot recovery
7. flash gapps zip
8. reboot system
9. Enjoy
If you have any doubt, read the steps twice
Credits
SHRP team for recovery
Note:
SHRP img is dump img, so that I uploaded in afh
I'm not mirroring official SHRP img
Hit thanks ? it encourage me to create more like this
Reserved
Rajendran Rasa said:
Reserved
Click to expand...
Click to collapse
I am new to this recovery thing so can you explain 2 step a little bit more.
And after this is my mi a3 is rooted??
In case you ask "i am doing this to install miui 12 on mia3
Hello
I tried modifying the logo.bin png files to customize the boot logo. I used LOGO BUILDER v 1.6 to extract the 60 png images. I checked the header and logo.bin file (same header), I resized the pngs to have crisp png. But, number 37 is a distorted 16x19 image (not possible to have a sharp image). Even extracting the logo.bin, then recompiling it (without modification) with LOGO BUILDER and flashing it with fastboot or with SP Flash tool: unable to start the device. Anyone have an idea to modify the logo.bin file and flash it to customize the note 8 pro?
Thank you.
Hi. It has been almost 7 years since i have flashed any rom. I wanted easy way to flash xiaomi eu in Mi 11x, indian variant.
In this thread - https://forum.xda-developers.com/t/did-anyone-installed-xiaomi-eu-on-mi-11x.4276167/
it was said that you can flash fastboot rom by renaming alioth to aliothin in 'windows_fastboot_first_install_with_data_format.bat' file. This methods feels way more easy than flashing TWRP.
Nowadays many users here and on youtube are flashing roms with recovery using TWRP. Is there any reason to use TWRP method instead of fastboot method. It seems TWRP method uses more custom things having higher chances of bricking the phone. in fastboot we are using default MIUI fastboot making it safer. Anyone experienced in flashing what would be the easiest way to flash EU Rom in Mi 11x (indian variant?
Hi there,
different roms have different methods of flashing nowadays, and especially for our device.
Fastboot flashing is incredibly easy. Just boot into fastboot and run the windows_fastboot_first_install_with_data_format.bat
which will be extracted with the rom.
before you do this please make sure you have unlocked the bootloader which takes 7 days to receive an unlock token from xiaomi servers.
RS156 said:
Hi. It has been almost 7 years since i have flashed any rom. I wanted easy way to flash xiaomi eu in Mi 11x, indian variant.
In this thread - https://forum.xda-developers.com/t/did-anyone-installed-xiaomi-eu-on-mi-11x.4276167/
it was said that you can flash fastboot rom by renaming alioth to aliothin in 'windows_fastboot_first_install_with_data_format.bat' file. This methods feels way more easy than flashing TWRP.
Nowadays many users here and on youtube are flashing roms with recovery using TWRP. Is there any reason to use TWRP method instead of fastboot method. It seems TWRP method uses more custom things having higher chances of bricking the phone. in fastboot we are using default MIUI fastboot making it safer. Anyone experienced in flashing what would be the easiest way to flash EU Rom in Mi 11x (indian variant?
Click to expand...
Click to collapse
Fastboot rom at EU is only when there isn't any TWRP available.
This said you have to go with TWRP for any update or change you need.
Last: Said less risk of hard brick with TWRP than fastboot process.
In order to install EU rom latest via TWRP it is so simply to boot TWRP in fastboot and install the rom.
Twrp will stay permanent once done.
NOTE:
Be careful to install a rom Aliothin compatible, nevertheless TWRP will stop you before going in trouble if any.
RS156 said:
Hi. It has been almost 7 years since i have flashed any rom. I wanted easy way to flash xiaomi eu in Mi 11x, indian variant.
In this thread - https://forum.xda-developers.com/t/did-anyone-installed-xiaomi-eu-on-mi-11x.4276167/
it was said that you can flash fastboot rom by renaming alioth to aliothin in 'windows_fastboot_first_install_with_data_format.bat' file. This methods feels way more easy than flashing TWRP.
Nowadays many users here and on youtube are flashing roms with recovery using TWRP. Is there any reason to use TWRP method instead of fastboot method. It seems TWRP method uses more custom things having higher chances of bricking the phone. in fastboot we are using default MIUI fastboot making it safer. Anyone experienced in flashing what would be the easiest way to flash EU Rom in Mi 11x (indian variant?
Click to expand...
Click to collapse
To flash xiaomi.eu the best way is to use twrp, also because the latest version is not in fastboot.
- First unlock the bootloader!
- Then disable Driver Signature Verification in Windows 10:
How to Enable or Disable Driver Signature Enforcement in Windows 10
How to Enable or Disable Driver Signature Enforcement and Test Mode in Windows 10
www.tenforums.com
- Download and install miflashtool then go to the driver option and install the phone drivers (It is the program you will need if you want to return to stock safely, keep it):
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
- Now you will need adb and fastboot, so download platform tool from here and put platform tool folder in c:\
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
- Now restart your pc.
Then follow these steps:
{To flash xiaomi.eu you must first launch twrp, then...}
1) download the twrp image from here:
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
2) Put the image filenametwrp.img in the platform tool folder;
3) Go to the platform tool folder, rename the filenametwrp.img to twrp.img;
4) (In the phone) make sure you have enabled usb debug in developer settings and have authorized the pc.
5) Download the xiaomi.eu rom .zip file for your mobile phone and put it in the phone memory
Xiaomi European Community | MIUI ROM Since 2010
MIUI ROM Global Language creators since 2010 providing support for Xiaomi MIUI and Mi Home products
xiaomi.eu
6) Now turn off the phone and start it in fastboot mode, then connect it to the pc via the usb cable
7) Go to the platform tool folder and in the address bar type cmd and hit enter (a prompt window should open) then type this command
Code:
fastboot devices
to check if it is recognized
8) if the phone code appears you can boot twrp by typing this
Code:
Code:
fastboot boot twrp.img
hit enter and the phone should boot into twrp
9) Now in twrp go to install and look for the .zip file of the rom you put before, then flash it.
10) When it finishes (it takes a few minutes) go back, go to the wipe section then advanced wipe and format datadata, then restart in the system. (It will remain on the miui logo for several minutes, wait, then the configuration should start.)
If you follow all the steps everything should go smoothly, but if you have any problems or questions you can ask.
RollDload said:
To flash xiaomi.eu the best way is to use twrp, also because the latest version is not in fastboot.
- First unlock the bootloader!
- Then disable Driver Signature Verification in Windows 10:
How to Enable or Disable Driver Signature Enforcement in Windows 10
How to Enable or Disable Driver Signature Enforcement and Test Mode in Windows 10
www.tenforums.com
- Download and install miflashtool then go to the driver option and install the phone drivers (It is the program you will need if you want to return to stock safely, keep it):
Xiaomi Flash Tool - Official Mi Flash Tool
Download the latest and Official Xiaomi Flash Tool from the Official Xiaomi Flash Tool Website.
xiaomiflashtool.com
- Now you will need adb and fastboot, so download platform tool from here and put platform tool folder in c:\
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
- Now restart your pc.
Then follow these steps:
{To flash xiaomi.eu you must first launch twrp, then...}
1) download the twrp image from here:
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
2) Put the image filenametwrp.img in the platform tool folder;
3) Go to the platform tool folder, rename the filenametwrp.img to twrp.img;
4) (In the phone) make sure you have enabled usb debug in developer settings and have authorized the pc.
5) Download the xiaomi.eu rom .zip file for your mobile phone and put it in the phone memory
Xiaomi European Community | MIUI ROM Since 2010
MIUI ROM Global Language creators since 2010 providing support for Xiaomi MIUI and Mi Home products
xiaomi.eu
6) Now turn off the phone and start it in fastboot mode, then connect it to the pc via the usb cable
7) Go to the platform tool folder and in the address bar type cmd and hit enter (a prompt window should open) then type this command
Code:
fastboot devices
to check if it is recognized
8) if the phone code appears you can boot twrp by typing this
Code:
Code:
fastboot boot twrp.img
hit enter and the phone should boot into twrp
9) Now in twrp go to install and look for the .zip file of the rom you put before, then flash it.
10) When it finishes (it takes a few minutes) go back, go to the wipe section then advanced wipe and format datadata, then restart in the system. (It will remain on the miui logo for several minutes, wait, then the configuration should start.)
If you follow all the steps everything should go smoothly, but if you have any problems or questions you can ask.
Click to expand...
Click to collapse
Thanks for detailed steps. Really appreciate it .
@RS156 I'm happy if my information was useful to you, let us know how it went if you flash
I have the Indian Mi 11X.
I'm receiving ERROR: 1
E3004: This package is for "alioth" devices; this is a "aliothin"
Please help.
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
Use this recovery. Also don't forget to format the data (Not wipe) for first install.
You can also follow this guide. https://forum.xda-developers.com/t/miui-12-5-stable-xiaomi-eu-poco-f3-mi-11x-redmi-k40.4267741/
I just updated from Miui to xxioami.eu miui stable 12.5.18.0 in my Mi 11X (aliothin)
karthikb89 said:
I have the Indian Mi 11X.
I'm receiving ERROR: 1
E3004: This package is for "alioth" devices; this is a "aliothin"
Please help.
Click to expand...
Click to collapse
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
Use this recovery. Also don't forget to format the data (Not wipe) for first install.
You can also follow this guide. https://forum.xda-developers.com/t/miui-12-5-stable-xiaomi-eu-poco-f3-mi-11x-redmi-k40.4267741/
I just updated from Miui to xxioami.eu miui stable 12.5.18.0 in my Mi 11X (aliothin)
Hello.
Is there any problem when going to downgrade MIUI on Redmi Note 8 Pro?
Thank you in advance.
No if you do right way.
Many ways to do that:
1/Lock Bootloader:
-You can search on Youtube: downgrade OTA Miui
2/Unlocked Bootloader:
Some ways:
- Put Fastboot rom in Download folder in C drive, extract it 1 or 2 times until it show folders and files inside, need no space in all folders path, use Mi flash tool (Remove checkpoint in Configuration), choose "clean_all" for not lock bootloader, connect your phone (Fastboot mode) > Refresh > Flash.
- Flash any custom roms base on your firmware (Don't flash PE or PPUI) then you can flash fastboot rom with Mi flash tool with no error (Removed checkpoint)
- Edit Flash_all.bat. You can Google it, but don't mess with it (Do stupid things can lead to bootloop or Hardbrick). Then flash with Mi Flash Tool.