Related
Yes,its working...
REMOVE ALL OTHER ROOT...working or not befor installing magisk....may end with....something you dont want...
Maybe it would be best to start with a freshly factory resetted phone.... (anyway,to erase all errors in TWRP,youll format/data so... )
you need bootloader unlock... followed instructions HERE don't forget to OEM UNLOCK in /settings/Developer section on phone..(enable it while pressing repeatedly on Phone version (in ''about phone also in settings)
You need MINIMAL ADB on pc...HERE
You need TWRP recovery installed...HERE
but before doing all that...BE SHURE to have the original UPDATE.APP (firmware from huawei) somewhere on your pc
you will need the BOOT.img from your original firmware... (extract it from the update.app (update.zip for huawei firmware)
HERE
extract the boot.img somewhere on your pc... like on your desktop...
then,youll need 2 magisk things...
the LATEST magisk ZIP file...
and the LATEST MAGISK APK...
FOLLOW THESE INSTRUCTIONS (from Magisk post...i did it and its working :silly: )
Installation Instructions
If you already have Magisk installed, you can directly upgrade through Magisk Manager
For installing Magisk the first time
Make sure to remove any other root, best to restore your boot image back to stock
Via custom recovery:
Download the latest Magisk zip file
Reboot to a custom recovery and flash the flashable zip
Via Magisk Manager (Only support v14.0+):
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and also be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Voilà!
Check whether Magisk Manager is installed and the version matches the latest one in the OP
If for some reason Magisk Manager isn't installed/upgraded automatically, please install it manually
the ADB method is the best...
after reboot,in magisk app,youre supposed to be GREEN checked....
after that,if all green,you can FIX that DATA problem in TWRP...saying cant mount or blablabla...
DO a backup cuz yess,youll loose everything... Hisuite for your apps
in twrp, FORMAT DATA... ...wipe data factory reset...re install your things then,youll be able to do recoverys ect. in twrp
dont forget to RE INSTALL magisk APK after formatting and factory reset
IT WILL take some time TO BOOT... so let it do its thing...
Now about magisk modules...all of them ive tried ended in (blablabla not a magisk module)...
no big deal....just dload the zip and look for the app or file in it... and apply to where it belongs... like new Oreo Emojis...ive dloaded the zip,found the file, then paste the file in /system/fonts...then reboot
now...if i made a mistake somewhere in my explanations well... sorry....
WARNING
IF youre device is bricked or what so ever... its not MY fault....you do that on your own......Ive done it,followed MAGISK instructions and its working....
Not shure about it...DONT DO IT....
DON'T DO TWRP backups with fingerprints/nip/code unlock methods activated on your phone... i had to factory reset phone cuz code was not working.
YES there's a way to recover anyway... THANKS HENKATE
Regarding fingerprint, boot in recovery and go to advanced > file manager and delete data/system/locksettings.db
Then advanced > terminal and type:
cd data/system
rm -rf *.key
Then reboot and you won't have secured lockscreen
MAGISK modules are HERE
Magisk MANAGER is available on PLAYSTORE
BEFORE making a twrp backup... (after data format ect.)...
you may want to FIX the huawei theme manager not working problem for some of us... the FIX is HERE
Thanks to Henkate
Youll need a good file system manager...i'm using ROOT EXPLORER and theres that new FX file explorer
does it work with android 7?
tanlikar1 said:
does it work with android 7?
Click to expand...
Click to collapse
Yes. In fact, this was meant for Android 7, but it should work on Android 6 too.
Absolutely...Im on Nougat emui5
does anyone have stock rom for MLA-L12C636B340 ?
Do you mean original firmware ?
Maybe you can still get it via firmware finder...
virusdunil said:
Do you mean original firmware ?
Maybe you can still get it via firmware finder...
Click to expand...
Click to collapse
ya
Working on Nova?
Does it work in the non plus Nova as well? Any experiences?
Worked on Can-L11. Tested. No need format data, in twrp tree, i add img, that work with encrypted data.
I can't get this to work on my MLA-03, i have TWRP installed and unlocked b/l. I tried to flash RR and Lineage but getting "can't mount" errors up the ying yang. Anyone with MLA-03 got any tips? Is there a certain recovery that is recommended?
Cooks_08 said:
I can't get this to work on my MLA-03, i have TWRP installed and unlocked b/l. I tried to flash RR and Lineage but getting "can't mount" errors up the ying yang. Anyone with MLA-03 got any tips? Is there a certain recovery that is recommended?
Click to expand...
Click to collapse
hi...yes and its a bit confusing...but,just follow instructions for LOS install...forget about /mount data and after flashing ,just reboot
virusdunil said:
hi...yes and its a bit confusing...but,just follow instructions for LOS install...forget about /mount data and after flashing ,just reboot
Click to expand...
Click to collapse
Got the flash working. Used Garak's Twrp and now i got. Thanks.
Does it work for android 8.0 or Huawei nova 2s in particular? I did make unlock the bootloader, but i could not find reliable root method. Please help with advice. Thank you.
Mezo21 said:
Does it work for android 8.0 or Huawei nova 2s in particular? I did make unlock the bootloader, but i could not find reliable root method. Please help with advice. Thank you.
Click to expand...
Click to collapse
Hi there,
I have Nova 2s, carefully follow this thread's instructions, it will 100% works : https://forum.xda-developers.com/ho...agisk-root-honor-view-10-mate-10-pro-t3749280
Thanks for the guidance, Magisk is doing very well.
Only TWRP is missing, but later.
Huawei Nova
CAN-L01C432B382
Magisk modules not working even if i rooted. Cant install modules from magisk app and twrp .zip
meskafonas said:
Magisk modules not working even if i rooted. Cant install modules from magisk app and twrp .zip
Click to expand...
Click to collapse
did you format data as f2fs? If yes, magisk doesn't go well along with it. If no, then you would get better support at magisk thread
virusdunil said:
Yes,its working...
REMOVE ALL OTHER ROOT...working or not befor installing magisk....may end with....something you dont want...
Maybe it would be best to start with a freshly factory resetted phone.... (anyway,to erase all errors in TWRP,youll format/data so... )
you need bootloader unlock... followed instructions HERE don't forget to OEM UNLOCK in /settings/Developer section on phone..(enable it while pressing repeatedly on Phone version (in ''about phone also in settings)
You need MINIMAL ADB on pc...HERE
You need TWRP recovery installed...HERE
but before doing all that...BE SHURE to have the original UPDATE.APP (firmware from huawei) somewhere on your pc
you will need the BOOT.img from your original firmware... (extract it from the update.app (update.zip for huawei firmware)
HERE
extract the boot.img somewhere on your pc... like on your desktop...
then,youll need 2 magisk things...
the LATEST magisk ZIP file...
and the LATEST MAGISK APK...
FOLLOW THESE INSTRUCTIONS (from Magisk post...i did it and its working :silly: )
Installation Instructions
If you already have Magisk installed, you can directly upgrade through Magisk Manager
For installing Magisk the first time
Make sure to remove any other root, best to restore your boot image back to stock
Via custom recovery:
Download the latest Magisk zip file
Reboot to a custom recovery and flash the flashable zip
Via Magisk Manager (Only support v14.0+):
This method does not need root, and also does not require a custom recovery.
However, you MUST have a stock boot image dump beforehand, and also be able to flash the patched boot image, either through fastboot/download mode or ODIN
Install the latest Magisk Manager
If you're planning to flash the patched boot image through ODIN, go to Settings > Update Settings > Patched Boot Output Format, and select .img.tar. For normal users leave it as the default .img
Press Install > Install > Patch Boot Image File, and select your stock boot image file
Magisk Manager will now patch your boot image, and store it in [Internal Storage]/MagiskManager/patched_boot.img[.tar]
Flash the patched boot image to your device and reboot. Voilà!
Check whether Magisk Manager is installed and the version matches the latest one in the OP
If for some reason Magisk Manager isn't installed/upgraded automatically, please install it manually
the ADB method is the best...
after reboot,in magisk app,youre supposed to be GREEN checked....
after that,if all green,you can FIX that DATA problem in TWRP...saying cant mount or blablabla...
DO a backup cuz yess,youll loose everything... Hisuite for your apps
in twrp, FORMAT DATA... ...wipe data factory reset...re install your things then,youll be able to do recoverys ect. in twrp
dont forget to RE INSTALL magisk APK after formatting and factory reset
IT WILL take some time TO BOOT... so let it do its thing...
Now about magisk modules...all of them ive tried ended in (blablabla not a magisk module)...
no big deal....just dload the zip and look for the app or file in it... and apply to where it belongs... like new Oreo Emojis...ive dloaded the zip,found the file, then paste the file in /system/fonts...then reboot
now...if i made a mistake somewhere in my explanations well... sorry....
WARNING
IF youre device is bricked or what so ever... its not MY fault....you do that on your own......Ive done it,followed MAGISK instructions and its working....
Not shure about it...DONT DO IT....
DON'T DO TWRP backups with fingerprints/nip/code unlock methods activated on your phone... i had to factory reset phone cuz code was not working.
YES there's a way to recover anyway... THANKS HENKATE
Regarding fingerprint, boot in recovery and go to advanced > file manager and delete data/system/locksettings.db
Then advanced > terminal and type:
cd data/system
rm -rf *.key
Then reboot and you won't have secured lockscreen
Click to expand...
Click to collapse
Do you have this problem with fingerprint? [emoji853] https://r.tapatalk.com/shareLink?ur...share_tid=3907398&share_fid=3793&share_type=t
Enviado desde mi HUAWEI CAN-L11 mediante Tapatalk
Have downloaded magisk APK and zip file but it's not working please help how to deal with this issue .
Anank54 said:
Have downloaded magisk APK and zip file but it's not working please help how to deal with this issue .
Click to expand...
Click to collapse
Common, search.
You need twrp if you want flash something.
Anank54 said:
Have downloaded magisk APK and zip file but it's not working please help how to deal with this issue .
Click to expand...
Click to collapse
Along with TWRP, you're best to get the bootloader unlocked from Xiaomi. I did this with my mi max, Xiaomi approved and I unlocked with their tool. Basically, miui may screw up with OTAs and TWRP in the future, so best to move from miui if you can.
From that point on, you're free to use the tools you wish. I'd recommend nigel's 7.1 unofficial ROM.
So the sequence would be :
1. Unlock bootloader with Xiaomi.
2. Download nigel's / other ROM and modem firmware, Gapps, and Magisk to the SD card.
3. Reboot to fastboot mode
4. Install TWRP with adb recovery command from your computer
5. Restart in bootloader / TWRP mode.
6. Wipe everything but the SD card.
7. Install the ROM, the firmware and gapps
8. Restart into regular system and setup the new ROM
9. Restart in bootloader / TWRP mode
10. Install Magisk
Boom...you now get regular OTA, have Magisk and substratum can be installed as well.
Test twrp build for this mediatek device (SM-C7100). Post logs etc so I can help solve issues when I am available to do so.
TWRP download: https://www.androidfilehost.com/?fid=673956719939834043
SM-C7100_C7100ZHU1ARB1.zip: https://www.androidfilehost.com/?fid=673956719939834050
Kernel download: https://www.androidfilehost.com/?fid=746010030569970527 April, 23rd, 2018
Sources
Kernel source: https://github.com/travismills82/android_kernel_samsung_mt6757
TWRP device tree: https://github.com/travismills82/twrp_android_device_samsung_jadeltechn
Kernel Features
Knox Disabled
DM-Verity Disabled
Tima Disabled
More TCP congestion control algorithms
Remove verifiedbootstate flag from /proc/cmdline (for safety net)
Conservative gov enabled
Always enforce selinux disabled
Fsync on/off Toggle
Ninendo Wiimote support
+ More not listed check git changes for a full list
Regards,
Travis82
Hi it didn't work... I think this is for J7 plus only and please Help after flashing the custom recovery my boot logo of C8 is gone.... Please help
I have tried to install using odin and it says on the phone a chinese message,which i translated with google, that read your phone needs to be unlocked to install a custom operating system, even though i enabled oem unlock and usb debugging. I used viper4android on my old phone and its annoying that im not able to install it on my new one.
Please help me when you get time:good:
the twrp cannot mount data partition unless format it first. and my device is sm c7100.
I can't install twrp in the first place.
How did you guys install it.
I managed to install twrp with odin after unlocking bootloader with crom service and disabling frp lock but when i try to boot into it there's nothing. It just boots into android. Tried installing it again. I tried adb reboot recovery but that booted to the official samsung recoveryb even though i installed twrp. How to fix this??
How to use the TWRP with Android Oreo?
Gautam488 said:
I managed to install twrp with odin after unlocking bootloader with crom service and disabling frp lock but when i try to boot into it there's nothing. It just boots into android. Tried installing it again. I tried adb reboot recovery but that booted to the official samsung recoveryb even though i installed twrp. How to fix this??
Click to expand...
Click to collapse
Brother how do you manged to unlock bootloader...? Please share with us
google play gives an error, the installation screen is not constantly installing
Hi everyone,
For those who have tried, could you please confirm whether the files are working or not.
Since there is no steps and instructions, can someone post the the procedure/code used for flashing kernel and TWRP?
Thanks
I finally tested everything out. Please feel free to take the command for reference.
Disclaimer:
1. Warranty would be voided and I am not responsible for any:
- Bricked device
- Data loss. So PLEASE BACKUP and you will definitely lose all your data during the rooting process.
2. I am not the one who build the files such as Kernel and TWRP img
Donation:
- BUT I am the one spending the time to test the files out. So, if you are happy with my work, please donate. I am happy for whatever (I mean the amount) support you give me.
- Bitcoin address: bc1qzvv3wrfj0furpzhdfxvzp07gy7whan907045gn
Aim:
1. Since Samsung Galaxy C8 has only 64GB of internal storage, 1000% sure it is not enough for using in 2021 onwards -> We need data and obb to SD card
2. MediaTek Hellio P20 is not powerful enough for using in 2021 onwards -> Need some CPU tweak
-> So, IT CAN’T BE USED WITHOUT ROOT
3. Makes Android great again
Summary:
- Both TWRP and Kernel, posted by Travis82 are definitely working for Samsung Galaxy C8 since I have tested them out and using them but they are only for Android 7.1.1 and not for stock Android 8.1.
- The files are NOT tested with Custom Rom.
- The reason why I said the Kernel is also for Android 7.1.1 because you need TWRP for flashing.
Procedure (For Android 8.1 user) NOT RECOMMENDED:
- First of all, Android 8.1 is SERIOUSLY NOT RECOMMENED for Samsung Galaxy C8 as nothing much you can do even though you are rooted. (i.e. XInternalSD causes bootloop)
- As mentioned above, both TWRP and Kernel posted by Travis82 are not compactable with Android 8.1
- For Android 8.1 user, it is recommended to downgrade to Android 7.1.1 with Odin.
- If you still want to use Android 8.1 and root, follow the guide in the link below using Magisk. Just follow the section for Samsung is good enough:
https://www.xda-developers.com/root/amp/
Procedure (For Android 7.1.1 user) RECOMMENDED:
Unlock bootloader + Enable developer mode -> USB debug + Prepare a SD card and put both Kernel and Magisk zip to the SD card
Applying TWRP recovery
Compress the recovery image to a .tar archive using 7-Zip
Install 7-zip
Right-click on recovery.img
“7-zip”
“Add to archive”
Select “tar” for “Archive format”
Flashing the recovery tar archive in Odin
Download, install and open Odin (I use Odin3 v3.13)
Unclick/Deselect “Auto Reboot” and “F. Reset Time” under “Options”
Enter Download mode
Power off, Power button + Volume Down + Home button, connect your PC
Flash the recovery tar archive in AP slot
When done flashing, unplug the device and enter recovery mode.
Power button + Volume Up + Home button, when the screen goes blank quickly, Power button + Volume Down + Home button.
If you can’t boot to recovery in this way, use ADB. “adb reboot recovery”
Applying new Kernel and Magisk
If storage can’t be mounted in TWRP (i.e. 0MB), consider changing the SD card or see this post: https://forum.xda-developers.com/t/...rnal-storage-0mb-in-twrp-permanently.3830897/ To be honest, there are lots of ways to fix this problem. Find the one best fit for you.
Flash Kernel zip in TWRP as usual
Flash Magisk zip in TWRP as usual
Reboot and wait, it takes quite a long time to boot
NOT DONE yet. You will probably face a serious problems in this stage:
Wifi passwords and Bluetooth connections can’t be saved
To solve this problem -> Install “Libsecure_Storage” in Magisk
DONE
Want Xposed? -> Search for the one for Android 7.1.1
Want app data to SD card? -> ExSDCard Access Enabler (Magisk) + XInternalSD (Xposed)
Want app obb to SD card? -> ExSDCard Access Enabler (Magisk) + Obb on SD (Xposed)
Want ram (swap), CPU tweak? -> App2SD
Want to reward me for my hard work? -> Donate
Bitcoin address: bc1qzvv3wrfj0furpzhdfxvzp07gy7whan907045gn
If you found anything on top of these things, please share.
toto4c19 said:
I finally tested everything out. Please feel free to take the command for reference.
Disclaimer:
1. Warranty would be voided and I am not responsible for any:
- Bricked device
- Data loss. So PLEASE BACKUP and you will definitely lose all your data during the rooting process.
2. I am not the one who build the files such as Kernel and TWRP img
Donation:
- BUT I am the one spending the time to test the files out. So, if you are happy with my work, please donate. I am happy for whatever (I mean the amount) support you give me.
- Bitcoin address: bc1qzvv3wrfj0furpzhdfxvzp07gy7whan907045gn
Aim:
1. Since Samsung Galaxy C8 has only 64GB of internal storage, 1000% sure it is not enough for using in 2021 onwards -> We need data and obb to SD card
2. MediaTek Hellio P20 is not powerful enough for using in 2021 onwards -> Need some CPU tweak
-> So, IT CAN’T BE USED WITHOUT ROOT
3. Makes Android great again
Summary:
- Both TWRP and Kernel, posted by Travis82 are definitely working for Samsung Galaxy C8 since I have tested them out and using them but they are only for Android 7.1.1 and not for stock Android 8.1.
- The files are NOT tested with Custom Rom.
- The reason why I said the Kernel is also for Android 7.1.1 because you need TWRP for flashing.
Procedure (For Android 8.1 user) NOT RECOMMENDED:
- First of all, Android 8.1 is SERIOUSLY NOT RECOMMENED for Samsung Galaxy C8 as nothing much you can do even though you are rooted. (i.e. XInternalSD causes bootloop)
- As mentioned above, both TWRP and Kernel posted by Travis82 are not compactable with Android 8.1
- For Android 8.1 user, it is recommended to downgrade to Android 7.1.1 with Odin.
- If you still want to use Android 8.1 and root, follow the guide in the link below using Magisk. Just follow the section for Samsung is good enough:
https://www.xda-developers.com/root/amp/
Procedure (For Android 7.1.1 user) RECOMMENDED:
Unlock bootloader + Enable developer mode -> USB debug + Prepare a SD card and put both Kernel and Magisk zip to the SD card
Applying TWRP recovery
Compress the recovery image to a .tar archive using 7-Zip
Install 7-zip
Right-click on recovery.img
“7-zip”
“Add to archive”
Select “tar” for “Archive format”
Flashing the recovery tar archive in Odin
Download, install and open Odin (I use Odin3 v3.13)
Unclick/Deselect “Auto Reboot” and “F. Reset Time” under “Options”
Enter Download mode
Power off, Power button + Volume Down + Home button, connect your PC
Flash the recovery tar archive in AP slot
When done flashing, unplug the device and enter recovery mode.
Power button + Volume Up + Home button, when the screen goes blank quickly, Power button + Volume Down + Home button.
If you can’t boot to recovery in this way, use ADB. “adb reboot recovery”
Applying new Kernel and Magisk
If storage can’t be mounted in TWRP (i.e. 0MB), consider changing the SD card or see this post: https://forum.xda-developers.com/t/...rnal-storage-0mb-in-twrp-permanently.3830897/ To be honest, there are lots of ways to fix this problem. Find the one best fit for you.
Flash Kernel zip in TWRP as usual
Flash Magisk zip in TWRP as usual
Reboot and wait, it takes quite a long time to boot
NOT DONE yet. You will probably face a serious problems in this stage:
Wifi passwords and Bluetooth connections can’t be saved
To solve this problem -> Install “Libsecure_Storage” in Magisk
DONE
Want Xposed? -> Search for the one for Android 7.1.1
Want app data to SD card? -> ExSDCard Access Enabler (Magisk) + XInternalSD (Xposed)
Want app obb to SD card? -> ExSDCard Access Enabler (Magisk) + Obb on SD (Xposed)
Want ram (swap), CPU tweak? -> App2SD
Want to reward me for my hard work? -> Donate
Bitcoin address: bc1qzvv3wrfj0furpzhdfxvzp07gy7whan907045gn
If you found anything on top of these things, please share.
Click to expand...
Click to collapse
Libsecure storage cannot be downloaded from anywhere could you please provide me link for the module
toto4c19 said:
For Android 8.1 user, it is recommended to downgrade to Android 7.1.1 with Odin.
Hello, thx for all your hard work.
Click to expand...
Click to collapse
My C8 is 8.1 tried resetting back to factory, still 8.1
Noted your comment re ODIN, but I use Linux, Odin seems Win only.
Have successful rooted and installed Lineage on an old Note 3, but I didn't have to downgrade that!
Can you give me please, some guidance how I can return this wretched thing back to 7.1?
Actually, I am suspecting return is the wrong word as it may have come with 8.1 installed.
I'm a bit lost at this point.
Cheers
p
What are the steps to be able to update to Android 10?
Can't seem to find it anywhere. Coming from pie. Thank you.
It was said that Edxposed does not work on android 10. Will eye on this as I need Edxposed badly, currently on Pie.
bush911 said:
It was said that Edxposed does not work on android 10. Will eye on this as I need Edxposed badly, currently on Pie.
Click to expand...
Click to collapse
Edxposed I can remove it. But I know that magisk does work. And that's what I need. Maybe disabling it and updating it will work ?
You can update you Pixel downloading the ota and the factory image from Google repository. Sideload the ota, reboot your phone and wait for the "update optimization" (there is a notification), then you have to patch the boot image (get it from factory) with Magisk Manager. Finally, flash the patched boot image.
In details:
1. Download the full OTA image and the Factory image from Google
2. Keep Magisk and root, copy boot.img from Factory in the Pixel
3. Boot into factory recovery (go in bootloader, choose recovery, keep power and press volume up button).
4. Choose Apply update from ADB
5. From windows: adb sideload fullOTAimage.zip
6. The update will take awhile
7. Reboot and let the update finish in android
8. Load magisk and patch the boot.img, copy patch_boot.img to computer
9. Boot into the bootloader
10. Flash the patched boot image with: fastboot flash boot patch_boot.img
BUT in the Google repository there are 2 version of ota/factory images (.019 e .020). I don't know the difference.
Edit: you need the Magisk Manager canary version, see this post: https://forum.xda-developers.com/pixel-3/how-to/guide-patching-boot-img-magisk-canary-t3964359
Simone_ASR said:
BUT in the Google repository there are 2 version of ota/factory images (.019 e .020). I don't know the difference.
Click to expand...
Click to collapse
According to what I've read .019 is for those who were already on the betas and .020 is for those upgrading from Pie.
Simone_ASR said:
You can update you Pixel downloading the ota and the factory image from Google repository. Sideload the ota, reboot your phone and wait for the "update optimization" (there is a notification), then you have to patch the boot image (get it from factory) with Magisk Manager. Finally, flash the patched boot image.
In details:
1. Download the full OTA image and the Factory image from Google
2. Keep Magisk and root, copy boot.img from Factory in the Pixel
3. Boot into factory recovery (go in bootloader, choose recovery, keep power and press volume up button).
4. Choose Apply update from ADB
5. From windows: adb sideload fullOTAimage.zip
6. The update will take awhile
7. Reboot and let the update finish in android
8. Load magisk and patch the boot.img, copy patch_boot.img to computer
9. Boot into the bootloader
10. Flash the patched boot image with: fastboot flash boot patch_boot.img
BUT in the Google repository there are 2 version of ota/factory images (.019 e .020). I don't know the difference.
Edit: you need the Magisk Manager canary version, see this post: https://forum.xda-developers.com/pixel-3/how-to/guide-patching-boot-img-magisk-canary-t3964359
Click to expand...
Click to collapse
Awesome man, thank you !
i updated from pie and patched the boot.image so now i have root. i was trying to edit the build.prop for hotspot tethering, the old net.tethering.noprovisioning=true but it wont allow me to edit and save the changes to the build.prop, root explorer is not getting read write permissions or something, root explorer does have super user [permission though. can anyone shed some light on this please
This seems kind of dangerous. It would be great to hear some more people's experience.
Has anyone confirmed whether or not Xposed works on Android 10? Riru Core says that it's compatible with Android 10. As long as Riru core works then Xposed should work. But I would like some confirmation so that I can update.
Ariel_PR said:
Has anyone confirmed whether or not Xposed works on Android 10? Riru Core says that it's compatible with Android 10. As long as Riru core works then Xposed should work. But I would like some confirmation so that I can update.
Click to expand...
Click to collapse
I haven't yet. I've been busy with work. As soon as I get a moment I'll do the update and confirm if everything is working right.
GunToYoMouth123 said:
I haven't yet. I've been busy with work. As soon as I get a moment I'll do the update and confirm if everything is working right.
Click to expand...
Click to collapse
Awesome, let us know!
Ariel_PR said:
Awesome, let us know!
Click to expand...
Click to collapse
I finally updated through OTA while on magisk and disabled it to enable it again with a patch. But with steps. I'll upload it soon for people coming from Android 9 (rooted in magisk) and OTA updating to Q and rooting back with magisk. Xposed will come in next.
GunToYoMouth123 said:
I finally updated through OTA while on magisk and disabled it to enable it again with a patch. But with steps. I'll upload it soon for people coming from Android 9 (rooted in magisk) and OTA updating to Q and rooting back with magisk. Xposed will come in next.
Click to expand...
Click to collapse
I'm exactly the same situation as you, currently on Android 9 rooted with Magisk, and receiving 10 OTA notification, but I don't know how to move foward. Looking for your guide, thanks dude!
GunToYoMouth123 said:
I finally updated through OTA while on magisk and disabled it to enable it again with a patch. But with steps. I'll upload it soon for people coming from Android 9 (rooted in magisk) and OTA updating to Q and rooting back with magisk. Xposed will come in next.
Click to expand...
Click to collapse
Thanks for the update!
ngelee said:
I'm exactly the same situation as you, currently on Android 9 rooted with Magisk, and receiving 10 OTA notification, but I don't know how to move foward. Looking for your guide, thanks dude!
Click to expand...
Click to collapse
Sorry it's taking long. I'm gonna post it here now in a few.
Okay, I work at a fulltime job so please bear with me and sorry for my late responses. And acknowledge that I am not responsible for anything that happens to your device. This step-by-step guide was done on an unlocked Google Pixel 3 XL unlocked bought from the Google Play store. I haven't tested it out on other versions of Pixel 3's or any other phone that isn't the Pixel 3 models since I do not own them, so keep that in mind. My situation was to find out how to update my ALREADY ROOTED/MAGISK version of Android 9 PIE through OTA. Upon checking or looking around I couldn't find any tutorials that are easy for me so with all the info I gathered I decided to wing it and compile steps from a lot of sites,risk it all and used my knowledge to put together this guide. In hopes, this helps everyone else! anyways here we go...
First, PLEASE make sure if you have Edxposed or any other modules or anything that is similiar, uninstall it or remove it. (Applications or mods from magisk are fine, I did this while I had a few mods from magisk, like viperfx, youtube vanice etc..)
1. Disable Automatic system updates in developer options, so it won't install OTAs without your acknowledgment.
2. When an OTA is available, first go to Magisk Manager → Uninstall → Restore Images. Do not reboot or you will have Magisk uninstalled. This will restore your boot back to 100% untouched stock images in order to pass pre-OTA block verifications.
3. After restoring the stock boot image, apply the OTA update as you normally would (Settings → System → System Update).
Wait for the installation to be fully done then press the "Restart now"
Wait for the phone to reboot and let it sit for a few minutes. 10-15 minutes give or take.
Don't panic, let it do its thing.
Once you see the "G" with the loading under it, you should be fine.
let it boot up.
4. Now download the factory zip
download 10.0.0 (QP1A.190711.020, Sep 2019)
5. Once downloaded, open the zip using any zip/rar program. (I HIGHLY recommend WinRar) within THAT zip folder extract the image-crosshatch-qp1a.190711.020.zip somewhere on your desktop.
6. Now then open THAT zip file and from it, extract the boot.img file onto your desktop and move it into your Pixel 3 XL's download folder. (I did it this way, so I recommend it)
7. Now uninstall your old magisk manager and install the latest Magisk Manager (app-release.apk)from HERE
8. Open Magisk Manager and Press Install ==> Press Install again ==> Select Patch a File ==> Select the boot.img file you extracted from the latest factory image that you placed in your Pixel 3 XL.
9. Magisk Manager will patch the boot.img and store the patched boot.img in the download folder as "magisk_patched.img"
10. Copy the magisk_patched.img file to your computer's Platform-tools folder(The one you use to adb push files in etc.) or the folder that has fastboot.exe(your ADB folder should have the fastboot.exe in it normally lol ) in it.
11. Connect the phone to the Computer with USB type- c cord.
12. Open your platform-tools folder if you haven't, and on the search bar type in "cmd" and tap enter on your keyboard.
(the cmd promt should open already in your location)
13. Now boot your Pixel 3 XL into fastboot mode by typing the commad: adb reboot bootloader
14. Once your phone is on fastboot mode then type: fastboot flash boot magisk_patched.img
15. Once it's done then type the command : fastboot reboot
16. Google logo should show,but don't panic give it a few.
Open Magisk and check if its rooted on the manager
And congrats ! you have a Magisk root on Android Q ! :highfive:
Please let me know if it worked for you and let me know if you need any help! :fingers-crossed:
ngelee said:
I'm exactly the same situation as you, currently on Android 9 rooted with Magisk, and receiving 10 OTA notification, but I don't know how to move foward. Looking for your guide, thanks dude!
Click to expand...
Click to collapse
Just posted it above ! please let me know if it works!
does Dolby work on pixel 3 xl? can anyone confirm?
I installed the OTA update the other day, but did anyone figure out if Edxposed Is working on Android 10?
This also works on Pixel 2 XL going from Android 9.0 July image with xposed 19.3.
Here's a simpler guide:
1. Go to Magisk Manager → Uninstall → Restore Images
2. Apply the OTA update and reboot
3. Download factory ZIP for 10.0 (In this case for taimen: Pixel 2 XL Android 10.0 Image)
4. From ZIP extract "taimen-qp1a.190711.020/image-taimen-qp1a.190711.020.zip/boot.img" and put it somewhere in the phone
5. Update Magisk with this version: Link
6. Open Magisk Manager and press: Install -> Install -> Patch a File and then select boot.img extracted before
7. Copy magisk_patched.img that Magisk has made to PC
8. Reboot phone to bootloader: adb reboot bootloader
9. Flash patched boot image: fastboot flash boot magisk_patched.img
10. Reboot phone: fastboot reboot
TL;DR:
Disable Magisk, update 10.0 OTA, upgrade Magisk, patch factory boot image with Magisk and flash boot image.
btw: I recommend Easy 7zip: http://www.e7z.org/ for handling the ZIP in a ZIP
Hello, I would need help to root my device, if someone could bring me advice I'm taking, I own remote control software if it tempts someone to help me I'm up for it
Have you unlocked the bootloader and install TWRP first?
The bootloader is unlocked, TWRP is not installed, I had to read the forums to try to install TWRP but my phone is stuck on fastboot impossible to do anything
You can root very easily:
1. start the phone in fastboot mode
2. from a PC type command "fastboot boot twrp.img"
3. once in TWRP, install magisk.zip file (don't forget to follow new instructions for Magisk v22)
4. once Magisk has been installed, reboot to system
5. congrats, your phone is rooted now (without TWRP permanently installed)
hello
after updating to android 11, euxm version, I have problems rooting with magisk 22, I change the apk extension to zip, I install it from twrp, but on reboot it crashes and returns to twrp.
also i no longer see the internal memory folders in android - data
carabot said:
hello
after updating to android 11, euxm version, I have problems rooting with magisk 22, I change the apk extension to zip, I install it from twrp, but on reboot it crashes and returns to twrp.
also i no longer see the internal memory folders in android - data
Click to expand...
Click to collapse
You might have incompatible module installed (for example SafetyNet fix) - disable all modules temporarily, install Magisk and see if the phone starts.
I disabled all the modules before installing the recovery rom, however there is the uninstall of magisk 22.0 and safetynet fix?
carabot said:
I disabled all the modules before installing the recovery rom, however there is the uninstall of magisk 22.0 and safetynet fix?
Click to expand...
Click to collapse
Can you start the phone without Magisk installed?
yes
I solved by disabling modules from orange fox recovery,
how can i do to see the contents of the android folder, that is scoped storage?
carabot said:
yes
I solved by disabling modules from orange fox recovery,
how can i do to see the contents of the android folder, that is scoped storage?
Click to expand...
Click to collapse
You are contradicting yourself a little, you said that you disabled all modules before recovery ROM installation, now that you disabled them from Orange recovery. It might help to describe steps which you did and current status of your phone.
I had disabled them from magisk, but in the twrp they were active, and when I realized it I disabled them from twrp and I solved them.
p. s.
safetynet fix is compatible with android 11 and magisk 22?
i wouldn't ruin it again
carabot said:
I had disabled them from magisk, but in the twrp they were active, and when I realized it I disabled them from twrp and I solved them.
p. s.
safetynet fix is compatible with android 11 and magisk 22?
i wouldn't ruin it again
Click to expand...
Click to collapse
Yeah just hide magisk from all google apps and it will work fine, mine passes
Jooan92 said:
Hello, I would need help to root my device, if someone could bring me advice I'm taking, I own remote control software if it tempts someone to help me I'm up for it
Click to expand...
Click to collapse
Unlock bootloader
Flash a recovery (fastboot flash recovery nameofrecovery.img)
Reboot into recovery (fastboot reboot and hold power and volume up)
Load magisk zip on an EXTERNAL SD find it and flash
Boom
for scoped storage is there a solution?
carabot said:
I had disabled them from magisk, but in the twrp they were active, and when I realized it I disabled them from twrp and I solved them.
p. s.
safetynet fix is compatible with android 11 and magisk 22?
i wouldn't ruin it again
Click to expand...
Click to collapse
You need to reinstall safetynet fix after Android upgrade, installation script uses different files for different Android versions.
What issue exactly do you have with storage?
after the update open file manager and if I click on android - date I no longer see the folders
i tried to install safetynetfix from twrp but it gives me error
carabot said:
i tried to install safetynetfix from twrp but it gives me error
Click to expand...
Click to collapse
Install from magisk under the modules section, then install from storage
gave me mistake because i had wrong files
Just for notification. If safety net is important with you. Install latest stable xiaomi.eu rom v12.0.11.0. Safety net is passed and implement in rom. I 've installed it...Developers continue playing cat and mouse with Google