Can Somebody Assist By Explaining This Odd Sitiuation - Samsung Galaxy Note 10+ Questions & Answers

I have Samsung Galaxy Note 10+. At the back of the phone it says the model is SM-N975FD 256G. However, in the software, the model is given as SM-N976N/DSM, the CSC is N975FOXM4CTE9, CP is N976NKOU1BSLA and AP IS N976NKSU1BSLB.
This phone seems to be working with most functions, but the S-Pen has connection problems and the phone cannot connect to Samsung servers for automatic updates.
I am trying to correct this by flashing official stock firmware to ensure its does not fail to get automatic updates. I was about to flash N975F....... in an effort to match the model written at the back of the phone believing that my vendor sold me a device that was tampered with.
Will I be right to flash N975F...... replacing the N976N....?
Please help. I want a phone that is based on official firmware. Thank you in advance

Sternford said:
I have Samsung Galaxy Note 10+. At the back of the phone it says the model is SM-N975FD 256G. However, in the software, the model is given as SM-N976N/DSM, the CSC is N975FOXM4CTE9, CP is N976NKOU1BSLA and AP IS N976NKSU1BSLB.
This phone seems to be working with most functions, but the S-Pen has connection problems and the phone cannot connect to Samsung servers for automatic updates.
I am trying to correct this by flashing official stock firmware to ensure its does not fail to get automatic updates. I was about to flash N975F....... in an effort to match the model written at the back of the phone believing that my vendor sold me a device that was tampered with.
Will I be right to flash N975F...... replacing the N976N....?
Please help. I want a phone that is based on official firmware. Thank you in advance
Click to expand...
Click to collapse
SM-N975f is the Note 10+ and SM-N976n is the Note 10+ 5G.
Type *#0*# and go to version, you will see the model here.
To be one more step sure, type *#06# to see your IMEI number, then compare with the given in the box.

SubwayChamp said:
SM-N975f is the Note 10+ and SM-N976n is the Note 10+ 5G.
Type *#0*# and go to version, you will see the model here.
To be one more step sure, type *#06# to see your IMEI number, then compare with the given in the box.
Click to expand...
Click to collapse
Thank you SubwayChamp. There is indeed something fishy about this phone. The model is given as SM-N976N as mentioned earlier. However, the serial number given by *#06# is different from the serial number stuck at the back of the phone.
So my question now, which is the true model for this phone? How come it has both N975F and N976N in its firmware packages?
If I have to use 1 type of firmware, which 1 should I go for 975F or 976N?
Unfortunately, I do not have the box - I will have to hunt for it
Your assistance is most appreciated
Thank you

Sternford said:
Thank you SubwayChamp. There is indeed something fishy about this phone. The model is given as SM-N976N as mentioned earlier. However, the serial number given by *#06# is different from the serial number stuck at the back of the phone.
So my question now, which is the true model for this phone? How come it has both N975F and N976N in its firmware packages?
If I have to use 1 type of firmware, which 1 should I go for 975F or 976N?
Unfortunately, I do not have the box - I will have to hunt for it
Your assistance is most appreciated
Thank you
Click to expand...
Click to collapse
I believe the issues I am experiencing are a direct result of these mismatches. The S-PEN is not connecting and its not getting updates. I really want a phone that updates on its own automatically

Sternford said:
Thank you SubwayChamp. There is indeed something fishy about this phone. The model is given as SM-N976N as mentioned earlier. However, the serial number given by *#06# is different from the serial number stuck at the back of the phone.
So my question now, which is the true model for this phone? How come it has both N975F and N976N in its firmware packages?
If I have to use 1 type of firmware, which 1 should I go for 975F or 976N?
Unfortunately, I do not have the box - I will have to hunt for it
Your assistance is most appreciated
Thank you
Click to expand...
Click to collapse
By dialing *#06# you get the IMEI, did you see the IMEI in the back cover too, or you opened the back cover? Can you type your IMEI in a site like this https://imei.org/ or similar? And see what it throws.
If the AP and CP partitions were flashed with the firmware for N976N then I have to assume that you can incline to this firmware as they're the most important parts, probably the last user flashed the CSC for N975F to have better signal and regional compatibility.
Also, you can check in the stock recovery screen, and see which original firmware came with.

SubwayChamp said:
SM-N975f is the Note 10+ and SM-N976n is the Note 10+ 5G.
Type *#0*# and go to version, you will see the model here.
To be one more step sure, type *#06# to see your IMEI number, then compare with the given in the box.
Click to expand...
Click to collapse
I have checked the box in which I received the phone. The label shows that its SM-N975FD Samsung Galaxy Note10+. The IMEI number is the same as that returned by *#06#.
I suspect the phone was tampered with and loaded with Note10+5G firmware for some reason.
Given this scenario, can I flash this phone with Note10+ (SM-N975F). I am afraid of bricking the phone, but I just want my phone to be official.
Please assist.
Thank you

The
SubwayChamp said:
stock recovery screen
Click to expand...
Click to collapse
Checking on IMEI.org shows a Galaxy Note 10+
Also the back label and the box label shows the model SM-N975F which is again Note10+.
I am tempted to try out the Note10+ firmware. I pray that I will still have a working phone at the end of it all
Thank you very much. I will update on my progress

Sternford said:
The
Checking on IMEI.org shows a Galaxy Note 10+
Also the back label and the box label shows the model SM-N975F which is again Note10+.
I am tempted to try out the Note10+ firmware. I pray that I will still have a working phone at the end of it all
Thank you very much. I will update on my progress
Click to expand...
Click to collapse
Probably the irrefutable question, how much did you pay for? (don't tell me how much) Is it worth for a Note 10+ or for the 5G version? It might be a noticeable difference. I'm inclined to think is the N10+.
Both firmware are compatible although not totally suitable, for any of them, just may encounter some glitches or unexpected results/behavior.

Guys, I am still struggling with the problem above. I have tried to flash the Galaxy Note 10+ firmware to resolve my odd situation. I am however failing (See Log below) What could be the problem. I get the error " ....<ID:0/004> Re-Partition operation failed.....". Re-partition check box is not checked
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 9164 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Sternford said:
Guys, I am still struggling with the problem above. I have tried to flash the Galaxy Note 10+ firmware to resolve my odd situation. I am however failing (See Log below) What could be the problem. I get the error " ....<ID:0/004> Re-Partition operation failed.....". Re-partition check box is not checked
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1401)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 9164 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Use a different Odin version, a modified one like this https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572/ if the problem persists probably you need to use the re-partition option as it seems your device was previously flashed with a non-proper firmware.

SubwayChamp said:
Use a different Odin version, a modified one like this https://forum.xda-developers.com/t/patched-odin-3-13-1.3762572/ if the problem persists probably you need to use the re-partition option as it seems your device was previously flashed with a non-proper firmware.
Click to expand...
Click to collapse
I took a lot of time to give feedback, I had been away and did not try the flashing until today.
Your guidance have been very helpful Subway Champ. I hope you can still be patient with me.
Unfortunately, I still cannot flash the phone. I have tried several versions of ODIN with various error messages. When I check re-partition, it takes me a step further, but still fails with an error that it cannot open a specified file.
Using Odin 13.3B_Patched
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 9164 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 2057)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!

Sternford said:
I took a lot of time to give feedback, I had been away and did not try the flashing until today.
Your guidance have been very helpful Subway Champ. I hope you can still be patient with me.
Unfortunately, I still cannot flash the phone. I have tried several versions of ODIN with various error messages. When I check re-partition, it takes me a step further, but still fails with an error that it cannot open a specified file.
Using Odin 13.3B_Patched
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 9164 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Can't open the specified file. (Line: 2057)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
It seems a restriction related to your PC/OS.
- Move the firmware to your main directory and rename it as simple as GN10 (for example).
- Run the tool as admin.
- Check the antivirus.
- Uncheck re-partition option.
- Use a different Windows version.
- Use a different PC.
- Try the firmware from GN10+.
- Try firmware from both models.

SubwayChamp said:
It seems a restriction related to your PC/OS.
- Move the firmware to your main directory and rename it as simple as GN10 (for example).
- Run the tool as admin.
- Check the antivirus.
- Uncheck re-partition option.
- Use a different Windows version.
- Use a different PC.
- Try the firmware from GN10+.
- Try firmware from both models.
Click to expand...
Click to collapse
Thank you. Let me try all that and see what happens. Thanks a lot

Sternford said:
Thank you SubwayChamp. There is indeed something fishy about this phone. The model is given as SM-N976N as mentioned earlier. However, the serial number given by *#06# is different from the serial number stuck at the back of the phone.
So my question now, which is the true model for this phone? How come it has both N975F and N976N in its firmware packages?
If I have to use 1 type of firmware, which 1 should I go for 975F or 976N?
Unfortunately, I do not have the box - I will have to hunt for it
Your assistance is most appreciated
Thank you
Click to expand...
Click to collapse
I believe the original case was broken and replaced with the wrong model number.
I had this problem from purchasing a unit on Ebay. When I contacted the seller, he said the case had been replaced with a different model unit and that they do this all the time. I requested and received a full refund, (primarily because the case was a little lose and did not match the model displayed on the software.

Related

Very dead S4 mini GT-I9195 LTE Germany

Hey guys,
i have a serious phone damage/brick over here.
I can start the device only in download mode, which is probably not that bad.
Anything i flash through Odin is not working:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9195XXUCOE4_I9195OXACOE1_I9195XXUCOE4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> All threads completed. (succeed 0 / failed 0)
I tried flashing the stock firmware, only the stock recovery, firmware with pit file, because of missing pit file on phone and of course Odin 1.85, 3.09 and 3.10.7
3.09 and 3.10.7 are not working at all:
Code:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> recovery.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
So, is there any possibility left, or the phone really dead?
Background information: phone was working the other day and then turned black. Bootlooping for a while, and then even the visual effects (samsung logo) didn't even show up. At this point, only download mode is working.
Hope someone knows a solution, or even a possibility to check if emmc is still working?

Doubt in firmware for Note 8 Verizon

Hi all,
I'm planing in get a note 8 from verizon N950U, just want to confirm if i can flash the below firmware to it in order to have the original splash screen without the verizon's logos:
N950USQU1AQI9 - SM-N950U USC USA
As far as i know the Product code USC is for USA without carriers applications and logos?
Am i right or not?
Thanks in advance
betovanbuuren said:
Hi all,
I'm planing in get a note 8 from verizon N950U, just want to confirm if i can flash the below firmware to it in order to have the original splash screen without the verizon's logos:
N950USQU1AQI9 - SM-N950U USC USA
As far as i know the Product code USC is for USA without carriers applications and logos?
Am i right or not?
Thanks in advance
Click to expand...
Click to collapse
USC is US Cellular
For Verizon you should flash this:
Unlocked with Verizon info - Here is your link: http://updato.com/firmware-archive-select-model?record=6CD1C6D99B4511E7963AFA163EE8F90B
Unlocked Clean (Verizon info after SIM provisions) - Here is your link: http://updato.com/firmware-archive-select-model?record=7FADCAA69B4511E7963AFA163EE8F90B
Both will work and have no bloat but with original logo and Samsung apps...the Verizon version makes provision easier I believe...but are essentially the same..
BlueFox721 said:
USC is US Cellular
For Verizon you should flash this:
Unlocked with Verizon info - Here is your link: http://updato.com/firmware-archive-select-model?record=6CD1C6D99B4511E7963AFA163EE8F90B
Unlocked Clean (Verizon info after SIM provisions) - Here is your link: http://updato.com/firmware-archive-select-model?record=7FADCAA69B4511E7963AFA163EE8F90B
Both will work and have no bloat but with original logo and Samsung apps...the Verizon version makes provision easier I believe...but are essentially the same..
Click to expand...
Click to collapse
Thank you!
Ive flashed the USA unlocked XAA but i Just figured out, that the option "call id & antispam is grayed out, hence i cannot activate it. Is there a way to fix it?
betovanbuuren said:
Ive flashed the USA unlocked XAA but i Just figured out, that the option "call id & antispam is grayed out, hence i cannot activate it. Is there a way to fix it?
Click to expand...
Click to collapse
Someone is going to try the Sprint unlocked firmware and see if the setting is available ... SIM should still connect properly to Verizon...if not APN settings would need to be added...will see...man Verizon blocks a lot
BlueFox721 said:
Someone is going to try the Sprint unlocked firmware and see if the setting is available ... SIM should still connect properly to Verizon...if not APN settings would need to be added...will see...man Verizon blocks a lot
Click to expand...
Click to collapse
On it
I have the SM-N950U Unlocked but with Sprint, do you know if [Unlocked Clean (Verizon info after SIM provisions)] FW Will work on my Note and delete the boot logo and apps? As betovanbuuren said, their is a N950USQU1AQI9 FW, it is the newest FW in SAMMOBILE here is the link: https://www.sammobile.com/firmwares/galaxy-note8/SM-N950U/USC/download/N950USQU1AQI9/189081/
Hope you can help me.
Thanks
Eahmmed said:
I have the SM-N950U Unlocked but with Sprint, do you know if [Unlocked Clean (Verizon info after SIM provisions)] FW Will work on my Note and delete the boot logo and apps? As betovanbuuren said, their is a N950USQU1AQI9 FW, it is the newest FW in SAMMOBILE here is the link: https://www.sammobile.com/firmwares/galaxy-note8/SM-N950U/USC/download/N950USQU1AQI9/189081/
Hope you can help me.
Thanks
Click to expand...
Click to collapse
The firmware you mention is for US Cellular carries doesn't it?
That firmware is the USC firmware...the XAA Unlocked Firmware has not dropped yet
I've been trying to flash the TMobile newest firmware to my unlocked Verizon Note 8 but for some reason the flash didn't occur. It ends with the code:
all threads completed. (succeed 0 / failed 1)
And the installation never starts, is this normal? for VZW phones can i only flash n950U1 firmwares and VZW?
I've downloaded the XAA (no carrier bloat) note 8 firmware today N950U1UEU2BQK1, when i enter in download mode and connect to odin, it recognizes the phone but when i click on start it never starts flashing, below the odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have an advise to fix this?
Thanks in advance.
betovanbuuren said:
I've downloaded the XAA (no carrier bloat) note 8 firmware today N950U1UEU2BQK1, when i enter in download mode and connect to odin, it recognizes the phone but when i click on start it never starts flashing, below the odin log:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1203)..
<ID:0/003> File analysis..
<ID:0/003> skip file list for home binary
<ID:0/003> apdp.mbn
<ID:0/003> msadp.mbn
<ID:0/003> persist.img.ext4
<ID:0/003> userdata.img.ext4
<ID:0/003> Home Binary Download
<ID:0/003> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
Do you have an advise to fix this?
Thanks in advance.
Click to expand...
Click to collapse
How are you coming along with this?
BlueFox721 said:
How are you coming along with this?
Click to expand...
Click to collapse
Hi @BlueFox721 thanks for all your help, i switched to another laptop and everything worked well, im now with november security patch and XAA CSC code.
Appreciate all your time you gave me.
betovanbuuren said:
Hi @BlueFox721 thanks for all your help, i switched to another laptop and everything worked well, im now with november security patch and XAA CSC code.
Appreciate all your time you gave me.
Click to expand...
Click to collapse
Coolness
You can but wouldn't you lose the advanced messaging features and things like VOLTE? Personally I couldn't care less about the advanced messaging but the VoLTE would be important to me.
Hey I'm in the same boat I have a unlocked note 8 but is in Sprint I'm having a hard time updating it to Verizon can you help me out

ATT Stock Full Nougat Odin Files //G928A\\ G928AUCS4EQL1 - Links UP

Hello guys,
Here i come to share the last one ATT S6 Edge Plus Update, you need Odin to install.
Warning!!! This will erase your data so before make a backup.
Esta es la actualizaciĆ³n actual: Android 7.0 Nougat
The details
Release date: December 27, 2017
Android version: 7.0
Security patch level (SPL): December 1, 2017
Baseband version: G928AUCS4EQL1
Kernel version: 3.10.61-12579816
Build number: NRD90M.G928AUCS4EQL1
Build fingerprint: 7.0/NRD90M/G928AUCS4EQL1
The updates
What's changing: Android device security updates, including BlueBorne fix (on SPLs September 1 or later)
This cost me money if you want to help me with something i share you my paypal.
Paypal: paypal.me/FabricioMedina
https: // 1drv.ms/f/s!ArVe1pBFasZk62sB_njQ-8Ghl98a
Regards.
thanks man
Thnx , need password
ablee121 said:
Thnx , need password
Click to expand...
Click to collapse
password is: www . clangsm . com
Password isn't working. Really need some help now. Nevermind, I'm an idiot
---------- Post added at 07:19 AM ---------- Previous post was at 06:54 AM ----------
What am I doing wrong? Downloaded and unzipped, loaded into ODIN, click start: All threads completed, (suceed0/failed0) Phone says secure check fail : (PIT)
---------- Post added at 07:37 AM ---------- Previous post was at 07:19 AM ----------
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1207)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Uncheck Re-partition.
Only auto reboot and f. reset time.
https://forum.xda-developers.com/attachment.php?attachmentid=4400817&stc=1&d=1516997388
Help me?
Now what?
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:-591365/000> Odin engine v(ID:3.1210)..
<ID:-591365/000> send REBOOT_ODIN command (COM:4)
<ID:0/004> Odin engine v(ID:3.1210)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Can't open the serial(COM) port.
<OSM> All threads completed. (succeed 0 / failed 1)
Phone says: SECURE CHECK FAIL : (PIT)
I've never had this problem before. I even tried using three different versions of ODIN (ver3.12.4, 3.12.7, & 3.12.10) All with the same results
try another nougat 7.0 files.
then update your phone with this updates: https://forum.xda-developers.com/att-galaxy-s6-edge-plus/general/g928a-adb-updates-t3575021
then try again.
i update my phone from:
Security patch level (SPL): August 1, 2017
Baseband version: G928AUCS4EQH1
Kernel version: 3.10.61-10809541
Build number: NRD90M.G928AUCS4EQH1
install samsung drivers.
check cable etc etc...
who can upload the files?? i will erase them need space in my cloud.
fmedina025 said:
try another nougat 7.0 files.
then update your phone with this updates: https://forum.xda-developers.com/att-galaxy-s6-edge-plus/general/g928a-adb-updates-t3575021
then try again.
i update my phone from:
Security patch level (SPL): August 1, 2017
Baseband version: G928AUCS4EQH1
Kernel version: 3.10.61-10809541
Build number: NRD90M.G928AUCS4EQH1
install samsung drivers.
check cable etc etc...
Click to expand...
Click to collapse
404 Error files not found!
I don't think I can do an ADB sideload because the phone is currently running Sprint software. It's unlocked but, I'm using it with a GSM provider. Was hoping a flash to AT&T firmware would free up my LTE options. The only option I currently have are 1. LTE/WCDMA=Fast Data but, No voice 2. GSM/UMTS Super slow Data but, can send and receive calls.
@kdgaydos
This is for S6 Edge Plus AT&T, not for Sprint.
Look for roms here https://forum.xda-developers.com/sprint-galaxy-s6-edge-plus
You can't install Roms for one Provider to another.
Regards.
Hi,
Thanks for the thread.
I have this phone but dont live in the US anymore. When I try to update it OTA is just says it is up to date. It would say it was up to date when I was stuck on android 5.1.1 and still does even after previously finding a full stock firmware and updating to G928AUCS4EQG1. It is at least nice be on android 7 now and up to date as of july 2017, but I would like to be as up to date as possible. Is there anywhere to dl the monthly updates since aug and install them? Call me stupid but I cant seem to figure out how to dl the full stock firmware from the beginning of this thread.
Thanx
https://1drv.ms/f/s!ArVe1pBFasZk62sB_njQ-8Ghl98a
password is: www.clangsm.com
Thank you very much, I will give it a try
fmedina025 said:
@kdgaydos
This is for S6 Edge Plus AT&T, not for Sprint.
Look for roms here https://forum.xda-developers.com/sprint-galaxy-s6-edge-plus
You can't install Roms for one Provider to another.
Regards.
Click to expand...
Click to collapse
opinions seem to vary on this site. The only reason I found this thread was another user pointed out that the internals of the S6 Edge+ are all the same, so in theory, any firmware should work. I really just wanted to flash the Samsung Unlocked Firmware on it but, NO ONE seems to have it anywhere, I didn't want to root and do a ROM install 'casue I didn't want to miss any updates but, it looks like support for this device is almost up.
Thank you very much "fmedina025". I've flashed it and it's doing great without any issue.
fmedina025 said:
Hello guys,
This cost me money if you want to help me with something i share you my paypal.
Paypal: paypal.me/Fabricioxxxxxx
https: // 1drv.ms/f/s!ArVe1pBFasZk62sB_njQ-8Ghl98a
Regards.
Click to expand...
Click to collapse
Since when does hosting files on a free OneDrive account cost money? lol.
are you stupid or what @REH1 ???
i'am refering to the roms!
that cost me money....
so **** you.
fmedina025 said:
are you stupid or what @REH1 ???
i'am refering to the roms!
that cost me money....
so **** you.
Click to expand...
Click to collapse
Well, well, well, little boy got super mad because somebody called him out on claiming something free "cost him money". An OTA update does not cost you money, that is also free. Are you that "stupid" that you think anybody believes that you're the only person in the world that pays for a stock firmware? Nope, what you're mad about is that somebody posted calling you out on your lie that you're using to beg for money.
it is free, what are you doing here?
get your ota free rom
so get out of here...
garbage people

Flashing tmobile firmware to SM-G9600DS (Non US S9 Duos)

Someone I know recently bought a Non US S9 dual sim and is using tmobile on it. They don't have VoLTE, Wifi Calling, or Video Calling options. Is there a way to flash the Tmobile firmware to this and get those things working? Also will the Tmobile bands be working after flashing?
I'm in the same situation as well. Bought a SM-G9600DS and it doesn't have any of these features - VoLTE, Wifi calling or video calling. VoLTE and Wifi calling menu options are missing from the settings > connections menu or from the dialer > settings menu. The video calling option is there on the dialer screen but it doesn't work. I am not interested in video calling but would prefer the other two features.
Called US T-Mobile tech support to see if they can provision WiFi calling but they said they won't be able to do any such "provisioning" and these features will not be available unless the device has them.
Does anyone know a way to enable these features for T-Mobile US on the first SIM card? Not necessarily flashing the T-mobile ROM but perhaps installing the wifi calling apks or something (pardon my dumb question)? Thank you!
Same situation. Have either of you figured out how to do this?
I'm in the same boat
I'm in the same boat - I have a SM-G9600 and trying to use on T-mobile with no Wifi calling / visual voicemail etc.
It seems that the latest T-mobile firmware is available here:
www . sammobile.com/firmwares/galaxy-s9/SM-G960U/
The question is, can we install at SM-G960U on the SM-G9600 successfully?
Has anyone done this?
I'm have v2 bootloader on my S9 G9600/DS with OWO 2ARE6 firmware. I want to flash to T-Mobile US firmware which also comes with bootloader v2. Apparently, this requires flashing to G960U1 (US unbranded Snapdragon) first, but that only comes with bootloader v1. Does anyone know how to get to T-Mobile firmware in this case? Is there a way to rollback to the v1 bootloader on the OWO dual sim firmware? If I just flash the T-Mobile v2 bootloader without first flashing the G960U1 unbranded firmware, will it work? If the process fails, is it easy to get back to the v2 OWO firmware?
sentron said:
I'm have v2 bootloader on my S9 G9600/DS with OWO 2ARE6 firmware. I want to flash to T-Mobile US firmware which also comes with bootloader v2. Apparently, this requires flashing to G960U1 (US unbranded Snapdragon) first, but that only comes with bootloader v1. Does anyone know how to get to T-Mobile firmware in this case? Is there a way to rollback to the v1 bootloader on the OWO dual sim firmware? If I just flash the T-Mobile v2 bootloader without first flashing the G960U1 unbranded firmware, will it work? If the process fails, is it easy to get back to the v2 OWO firmware?
Click to expand...
Click to collapse
Test n find out. Never know until you try.
i woukd highly recommend against flashing firm from a different device to ur phone (yes, they are different.)
i got a solution for one of you though if u have an s9+, ill trade my locked bl g965u lol
I tried flashing the US unbranded firmware with v2 bootloader (G960U1UES2ARF4/G960U1OYM2ARF4/G960U1UES2ARF4/G960U1UES2ARF4) onto my G9600/DS with v2 bootloader. It failed with a "Re-partition operation failed" error. I had checked only Auto reboot and F. Reset Time in ODIN options. Does anyone know if there is still a way to flash?
Here's the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 6625 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
sentron said:
I tried flashing the US unbranded firmware with v2 bootloader (G960U1UES2ARF4/G960U1OYM2ARF4/G960U1UES2ARF4/G960U1UES2ARF4) onto my G9600/DS with v2 bootloader. It failed with a "Re-partition operation failed" error. I had checked only Auto reboot and F. Reset Time in ODIN options. Does anyone know if there is still a way to flash?
Here's the log:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 6625 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> FAIL!
<ID:0/005>
<ID:0/005> Re-Partition operation failed.
<OSM> All thwreads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
You are clueless. Trying to trade open bootloader and root for mere volte and wifi calling. I don't know what are you doing on this site

Changing frimware from UAE to India

I was trying to change firmware of my A520F from UAE to India. I downloaded the latest firmware for India from sammobile and tried to update using odin, however I got an error. Below is the log file. Please help how to change the firmware to India specific one.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4545 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Changing frimware from UAE to India - Resolved
Issue resolved. I first uploaded only the India specific CSC using Odin, then factory reset the phone, then I uploaded only the AP file, again factory reset the phone as soon as it booted, then uploaded the BL & CS file and again factory reset the phone. Now the CSC has been changed to INS.
Bala_R said:
I was trying to change firmware of my A520F from UAE to India. I downloaded the latest firmware for India from sammobile and tried to update using odin, however I got an error. Below is the log file. Please help how to change the firmware to India specific one.
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin engine v(ID:3.1301)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4545 M
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Can't open the specified file. (Line: 1892)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Hey guys I have the Galaxy a7 2017 from uae and I want to change the firmware to Indian but I don't know for some reason when I am connecting my phone to pc it only charges please help me
roshan_dubey- said:
Hey guys I have the Galaxy a7 2017 from uae and I want to change the firmware to Indian but I don't know for some reason when I am connecting my phone to pc it only charges please help me
Click to expand...
Click to collapse
Download Samsung latest usb driver on your pc
aarush.chaurasiya said:
Download Samsung latest usb driver on your pc
Click to expand...
Click to collapse
I tried but whenever I connect it via USB my computer says it connot recognize the last plugged in device and after that my phone is just charging I tried installing latest drivers from Samsung but I didn't work what should I do?

Categories

Resources