Related
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
EDIT: side note, apparently people on here are asking if this is for real or not lol. heres a screenshot in here https://imgur.com/a/depZugF
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to treble rom dev and have a go at it guys!
Edit: BIG THANKS TO JAX
download everything except hwota> https://forum.xda-developers.com/honor-6x/how-to/guide-update-to-emui-8-t3807806
unlock bootloader
flash nougat compatable twrp (search the dev form)
thanks jax 5. Add the downloaded files to the folder "HWOTA7\Update" and rename two files same as mentioned below->
- update_data_full_public.zip to update_data_public.zip
- update_full_BLN-AL20_all_cn.zip to update_all_hw.zip
-update.zip don't rename.
place all three filles in same folder on sdcard
download hurupdater (search the form)
place it in same folder as the file just mentioned
boot to twrp.
format system data cache
navigate to sdcard the update folder with all four files.
flash hurupdater.zip
press vol down
wait for completion
reboot system
wait 10 minutes
hold power till reboot
boot to recovery and it should be stock.
format data
reboot
should boot up and work flawlessly except for missing browser which can be downloaded :/
woot you are on emui 8 and your partition setup is now oreo
now turn phone off
hold vol down and plug into pc with fastboot tools
go here https://forum.xda-developers.com/project-treble/trebleenabled-device-development
download a oreo rom A only (i used Resurrection Remix)
flash system with fastboot
reboot to recovery
format data
reboot
profit.
BONUS
go here after all said and done https://forum.xda-developers.com/honor-6x/development/rom-emui-8-0-0-honor-6x-dual-sim-t3794079
make sure to thank KingOfMezi
download this https://mega.nz/#!a81EDZAR!2-9yPFh3reghkGcfSl3nRIJhHGkP8fqDsgUG66ewjkk
fastboot flash recovery_ramdisk RECOVERY-V2.img
boot to recovery and flash latest magisk for root goodies
Which emui 8 did you flash ? I have a usa Honor 6x and would like to do the same
pspgarret said:
Successfully flashed emui 8.0 on usa variant without need to rebrand by using hurupdater WOOT AND zero issues encountered
Step 1. all i did was fastboot flash system of 64bit A only gsi resurrection remix
Step 2. make sure you are using stock recovery from huawie and fromat data.
Step 3. reboot && profit
i have tested this rom for about 6 hours and as of now its smooth as butter, havent had a single issue (yet).
pretty sure if you are using emui 8 you are golden to install whatever Aonly GSI you want.
also for bonus i instaled latest magisk and you guessed it is flawless
hoping this is not a duplicate but i cant find a post on this yet
try heading of to trble rom dev and have a go at it guys!
Click to expand...
Click to collapse
is themes apps working for you? flashing emui 8 via huru will give incomplete flash.
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
How do you do it?, Where is the links of the files?
thanks for responses, i updated the op and hopefully that is a bit more informative.
let me know if it is confusing at all and ill try to fix it
Can i flash p gsi.? (havoc 2.0)
And.. Is volte working..?
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
jhorne917 said:
If I am not wrong I think volte will not work on any custom roms except for a stock based custom room because Huawei hasn't released source for it. Dunno I could be wronf
Click to expand...
Click to collapse
It's not a custom rom... It's gsi
anyone tested other gsi? i only tried open kirin roms
are you sure it didn't rebranded? at about information, it say bln-24 or bln-al20? it could brick the phone, I thinks is better using the emui 8 from india instead the china version
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
pspgarret said:
hey guys, any A ONLY GSI ROM should work. i used treble resurrection remix NOT openkirin as the op states.
and i DID NOT rebrand, it states in rom info i am BLN-L24 -thats usa ver.
Click to expand...
Click to collapse
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Nollie8969 said:
You went from android7 to RR based on android8 without rebranding and updating to stock android8 ?
Click to expand...
Click to collapse
op states i upgraded to emui 8 using nothing but hurupdater script and update packages in 7.x twrp buddy
https://imgur.com/a/depZugF
That's great man, i need to backup a lot of stuff since last TWRP backup, but I'm definitely gonna do this. I own a BLN-L21, so i hope this'll works the same as on any other variant, and that would be the real gem in all of this. Thanks for sharing
galapagos said:
This was possible for the US variant ( L24) since July. It was mentioned couple times before. I think using hwota is a cleaner way of upgrading.
Click to expand...
Click to collapse
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
You mean the guide: How to brick your phone ?
Nollie8969 said:
You mean the guide: How to brick your phone ?
Click to expand...
Click to collapse
That's helpful and informative.
johnnyrichter said:
Link to guide for the hwota method of upgrading bln-l24 to EMUI 8 without rebranding?
Click to expand...
Click to collapse
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
galapagos said:
Searching for "hwota7" gives you this: https://forum.xda-developers.com/honor-6x/development/hwota7-hwota8-honor-6x-t3792601
In short, all you have to do is put the oreo firmware files (L22 version, not the Chinese version) in the update folder and run the batch script. Choose L24 region during the process and you're done. I've done this at least couple dozen times as I frequently test out all treble ROMs as they're released/updated, and sometimes go back to nougat in case I find something that's not compatible with oreo. But all in all, this oreo ROM is very stable and is my daily driver.
Click to expand...
Click to collapse
During your testing, which ROM has been the most stable in terms of daily-driver use so far? Last year after getting this 6x I tried a few different ROMS, back before OpenKirin happened, and had nothing but problems with boot loops and etc so I went back to stock EMUI5. Few days ago I got B365 and then B376 via OTA after installing the Huawei software on my PC. This phone really makes me miss my S5 with LineageOS.
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
Click to expand...
Click to collapse
What's your phone's specifications?
Lanreallenjay said:
What's your phone's specifications?
Click to expand...
Click to collapse
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
Ask for help here
https://t.me/phhtreble/283195 <---
Read before any question ^^^
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
itShouldWork said:
Hello everyone,
I'm getting really frustrated hree as I can't flash any android 10 GSI. I either get bootloop, stuck on samsung logo or stuck on restarting on samsung logo.
Flashing different kernels seem to change the above behavior (instead of bootloop I get samsung logo and vice-versa).
I tried everything:
Doing the no-verity thingie...
Flashing stock files then GSI - nothing.
Flashing soldiers oreo kernel - nothing
Flashing endurance kernel - nothing
I can't find a vendor image that's compatible with any GSI on my phone. I also can't find any kernel that's compatible either.
So please, end my misery... if anyone managed to install android 10 GSI on this TREBLE COMPATIBLE DEVICE, please guide me through or provide any useful file (vendor img/kernel) that I might have been missed.
I wrote this because I couldn't find anything that could help... Thanks in advance!
EDIT:
I solved the problem with the kind help from phhusson and the guidance from Lanreallenjay (thanks, both of you!), so I'm trying to provide the solution for anyone that might be having the same problem as I had. So here it is:
For PIE GSI: use stock kernel/vendor (anything stock), flash the GSI, then flash Magisk -> it should boot fine now (only tested with phhusson's GSI. I had vibrating restart loops before, I wasn't installing magisk, that was my mistake)
For Android 10 GSI: same as above, but install the modded Magisk from phhusson's git (located @ v200 android 10 gsi post) instead of the normal one .
Click to expand...
Click to collapse
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
rupert3k said:
So from stock you flashed AOSP 10 GSI to system partition then phh's magisk (in TWRP) then it works for you?
Click to expand...
Click to collapse
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
rupert3k said:
After flashing G960FXXS7CSJ3 November stock firmware I can no longer flash anything.
(can't mount data partition)
When I try downgrading to G960FXXU5CSF2 June firmware Odin fails and the screen says:
SW REV. CHECK FAIL (BOOTLOADER) DEVICE: 7 BINARY: 5
November G960FXXS7CSJ3 seems to have upgraded the bootloader security, does anyone know a fix?
Click to expand...
Click to collapse
Have you tried formatting data with TWRP (to the part when it asks you to write "yes") then flash no-verity?
You should at least be able to flash TWRP. If you can't, just download the proper USB drivers for your device, it might be the culprit.
Cheers!
itShouldWork said:
Yep, it does. Buuut the rom is not stable at all, I've got random reboots/ crashes when opening settings and such, not usable at all. I'm on ONE UI 2.0 beta now which is much more stable (daily driver stable actually).
Click to expand...
Click to collapse
Phh just hinted it's likely Pie vendor causing panics:
"First you need to flash stock rom. Then install magisk and then this gsi.
Though please note that on Pie vendor, S9 kernel panics and reboot every few minutes, so it is highly unusable."
itShouldWork said:
Hey, thanks for the interest!
I've got the S9 Exynos variant (SM-G960F, Europe), I unlocked the bootloader several days ago.
It's on android 9 right now, I flashed the stock firmware after I've tried everything to get android 10 treble to work and failed.
Current kernel version: 4.9.59-16947752 (stock)
Build number: PPR1.180610.011.G960FXXS7CSJ3
I can flash any rom available besides GSI (I've used lineage OS 16 for a couple of days).
If you need anything else more specific just ask, I don't really know what exactly can help with this situation.
Cheers!
Click to expand...
Click to collapse
I have tried Android 10 GSI , using latest Q update
ZoiraP said:
I have tried Android 10 GSI , using latest Q update
Click to expand...
Click to collapse
Is it usable? any random reboots/ annoying instability?
itShouldWork said:
Is it usable? any random reboots/ annoying instability?
Click to expand...
Click to collapse
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
ZoiraP said:
I have tried it partly , nfc isnt working , camera quality is bad , Bluetooth working , audio working , magisk working . I'll use it a bit more and tell you.
Click to expand...
Click to collapse
Camera quality might be fixed with Google cam, if you find a good port.
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
rupert3k said:
Not to derail the thread but I just noticed after installing Android 10 beta 2 Treble Info now reports my S9 supports Treble A/B, curious no?
Click to expand...
Click to collapse
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
A\B
itShouldWork said:
Wait what? That's interesting...
Can someone with more experience enlighten us about the differences between the A only and A/B?
Click to expand...
Click to collapse
No real experience but A\B devices have two slots ie double the partitions (OnePlus has 67) .
This allows updates to be installed while running from slot A while the updated system is copied to B.
Apparently Q requires A\B so now we're on Q may as well try that next time we're curious
Phh just released:
AOSP 10.0 v208
Fix suspend/dt2w for Samsung Q vendor
Fix backlight for Samsung Q vendor
Samsung Q's fine, love gestures but the bloat is killing me.
You can tell Q's going to be so much leaner without bixby & friends.
Glad we installed it to get compatible but I think now we probably stand a better chance with 10 GSI's, hopefully LOS17 & Pixel Experience get updated again soon.
Wondering whether to following the rooting instructions yet?
Phh did say "flash stock rom then magisk and then gsi"
https://forum.xda-developers.com/galaxy-s9/how-to/one-ui-2-beta-rooting-installing-twrp-t4012961
ZoiraP's wondering why we sooo slow lol!
Wow this looks good: https://forum.xda-developers.com/ga...-s9--s9-cross-device-development/rom-t4020939
Hey dear xda-dev people,
i have bought a used redmi note 8 pro. And because i want a safe and secure smartphone i would appreciate it that the OS has no google software on it. I read that theres only an unofficial lineage os which is currently not updated anymore. What else custom firmwares are safe, do regulary get updated and doesn't have any google tools? I thought about crDroid.
How do I install custom firmwares and stuff? I'm not a complete beginner - i know adb fastboot etc. but I read that there should be a special situation with the Redmi note 8 pro. I just enabled the dev mode. My device has 128 gb and is actually running on global MIUI-Version 12.0.2. Stabil. The android version is 10QP1A.190711.020.
Can you please help me and spread your knowledge?
Greets,
newbie922
Seems you didn't even search for it...
Here is a full guide. Flash TWRP > Do a full backup > Install any ROM you want, you can find some of the ROMs here.
I searched for it but i was pretty unsure because i read that a brick can happen very easily with this phone. thanks a lot for your answer!
The phone is now succesfully unlocked. Is the
"5. LR Team TWRP" really the correct twrp for my actual android (10QP1A.190711.020) and miui version (Version 12.0.2). Stabil.
Then I will try to flash it and report. Should I Install something like an antibricktool first?
@newbie922 Do you want to install CFW or nom-CFW custom ROM?
I want to install a cfw without google apps. Also a non cfw with no google apps would be great!
Do you have something which you can recommend? Regulary updates would be cool.
newbie922 said:
cfw without google apps.
Click to expand...
Click to collapse
Resurrection Remix (latest build requires CFW 2.1)
newbie922 said:
Also a non cfw with no google apps would be great!
Click to expand...
Click to collapse
Mabye Havoc OS?
That sounds good. I already read about this both firmwares. But question now is if it's safe to install the LR Team TWRP with my actual android and MIUI-Version. After i succesfully installed twrp I can install the resurrection remix or the havoc os?
Data Encryption is still possible with both of the firmwares?
newbie922 said:
After i succesfully installed twrp I can install the resurrection remix or the havoc os?
Click to expand...
Click to collapse
For Resurrection Remix - follow method #1 from Megathread https://forum.xda-developers.com/t/guide-info-psa-redmi-note-8-pro-megathread-cfw.4056527/
For non-CFW ROM - first of all - install TWRP 3.5.1 Unified.
So you mean this twrp for example? https://forum.xda-developers.com/t/...-black-twrp-3-5-1-v2-unified-begonia.4241633/
Concerning the megathread it's not possible to just install a cfw afterwards by flashing it? I have to downgrade to A9 etc. etc.
newbie922 said:
So you mean this twrp for example? https://forum.xda-developers.com/t/...-black-twrp-3-5-1-v2-unified-begonia.4241633/
Click to expand...
Click to collapse
For example.
Here's official TWRP for Note 8 Pro
Download TWRP for begonia
Download TWRP Open Recovery for begonia
eu.dl.twrp.me
newbie922 said:
I have to downgrade to A9 etc. etc.
Click to expand...
Click to collapse
Yes, get yourself down to business
Hey guys,
As the title suggests, I'm looking for help in flashing GSI's(Generic System Images). I was looking through the Android developer website for Android 12 today and the 'Get a Generic System Image' tab caught my eye. I was wondering if any of you guys have experience in installing GSI's and could briefly outline the steps needed.
Here's the link of the Android 12 GSI if you're interested.
I guess I should post this is the general questions section but this is the device(Redmi Note 8) I can afford to experiment with at the moment so here I am.
Thanks in advance.
22naresn said:
I'm looking for help in flashing GSI
Click to expand...
Click to collapse
here is the guide
(GSI img for RN8 tend to be less stable, i suggest you use a normal rom)
22naresn said:
Android 12
Click to expand...
Click to collapse
there is already a complete A12 build for RN8 that you can flash directly
(be carefull in what firmware to flash)
loopypalm said:
here is the guide
(GSI img for RN8 tend to be less stable, i suggest you use a normal rom)
there is already a complete A12 build for RN8 that you can flash directly
(be carefull in what firmware to flash)
Click to expand...
Click to collapse
Wow, thanks man. This helps a lot.
im wondering if its possible to use twrp to flash stock oos on op9 pro?
if it is, does anyone have a flashible rom for 11.2.10.10?
this.guy.lol said:
im wondering if its possible to use twrp to flash stock oos on op9 pro?
if it is, does anyone have a flashible rom for 11.2.10.10?
Click to expand...
Click to collapse
that flashable zip and others our collected here:
[OnePlus 9 Pro][ROM][OTA][Oxygen OS] Repo of Oxygen OS Builds
As OnePlus doesn't always provide download links for all of their OxygenOS ROMs & OTA update zips, we've created an index to put the links in one post so that they're easy to find. Note: This is not a support thread for issues you may have with...
forum.xda-developers.com
I have not flashed them in TWRP, but may be possible now. I did sideload via twrp successfully a few months ago
this.guy.lol said:
im wondering if its possible to use twrp to flash stock oos on op9 pro?
if it is, does anyone have a flashible rom for 11.2.10.10?
Click to expand...
Click to collapse
Mate, you are posting a lot of threads with a lot of questions about stuff that has already been posted.
Please do some research. Use the search function, read, learn...