Development [ROM][OFFICIAL][alioth][13] LineageOS 20 for POCO F3/Mi 11X/Redmi K40 - Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40

Development [ROM][OFFICIAL][alioth][13] LineageOS 20 for POCO F3/Mi 11X/Redmi K40 - Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40

SafetyNet
By default LineageOS doesn't pass SafetyNet, why?, Check here https://lineageos.org/Safetynet
You can use this unofficial method to pass SafetyNet: ih8sn

I'm on latest miui 13.0.3 do i have to downgrade? Thanks.

demirlijanp said:
I'm on latest miui 13.0.3 do i have to downgrade? Thanks.
Click to expand...
Click to collapse
So far only tested with android 11 firmware. You don't need to downgrade if it's working without issues.

Does ok google work?

What lineage features were not implemented ?

If someone flash this, please post some screenshots, and some thoughts on how the ROM behaves.

Morpheuspt said:
Does ok google work?
Click to expand...
Click to collapse
It should work with gapps.
AkechiShiro said:
What lineage features were not implemented ?
Click to expand...
Click to collapse
Expandable volume panel, buttons, statusbar features,etc.. need to be ported from 18.1.

Correct me if I'm wrong but Android 12L is a Rom that is specifically created with Android Tablet Devices in mind like enlarged UI. & better multi tasking support to utilize larger screen real estate.
Are their any notable advantage in Android 12L over regular Android 12 from Alioth point of view (Excluding the advantage of on being latest available OS).

althafvly said:
It should work with gapps.
Expandable volume panel, buttons, statusbar features,etc.. need to be ported from 18.1.
Click to expand...
Click to collapse
Could any contribution be made by someone who just develops a bit if yes, maybe I could help in porting those feature, I don't have any experience in working on Android tho, I can install Android Studio and Gradle for building if that's what used. If there is anywhere where there is a contribution guide, I'll be glad to give my best at it, thanks !

AkechiShiro said:
Could any contribution be made by someone who just develops a bit if yes, maybe I could help in porting those feature, I don't have any experience in working on Android tho, I can install Android Studio and Gradle for building if that's what used. If there is anywhere where there is a contribution guide, I'll be glad to give my best at it, thanks !
Click to expand...
Click to collapse
You can submit changes to lineageos via gerrit. It will be reviewed by Devs and might get merged.
How to use Gerrit | LineageOS Wiki
wiki.lineageos.org

Could you please share some screenshots of features and specifications if anyone has installed the rom. Lineage Android 12L would be a great rom.

althafvly said:
You can submit changes to lineageos via gerrit. It will be reviewed by Devs and might get merged.
How to use Gerrit | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
I have tried to build the ROM for Android12 (Lineage OS 19.1) using the code source from Gerrit and the builds fails with an error (at the step 'brunch alioth'), I have asked for help on #lineageos Libera.Chat IRC server and has received those answers "build for Android 11, if you don't know what you're doing", "we know how to solve the issue, it's easy but we won't tell you" and so on. Quite the nice community there btw, feels very welcoming.
So I can't really progress much yet, if you have any resources that could help me get started, feel free to DM me.
I've attached a screenshot of the issue, but since Lineage OS 19.1 is unofficial at the moment, I don't think LineageOS community plans on helping much for now at least.

AkechiShiro said:
I have tried to build the ROM for Android12 (Lineage OS 19.1) using the code source from Gerrit and the builds fails with an error (at the step 'brunch alioth'), I have asked for help on #lineageos Libera.Chat IRC server and has received those answers "build for Android 11, if you don't know what you're doing", "we know how to solve the issue, it's easy but we won't tell you" and so on. Quite the nice community there btw, feels very welcoming.
So I can't really progress much yet, if you have any resources that could help me get started, feel free to DM me.
I've attached a screenshot of the issue, but since Lineage OS 19.1 is unofficial at the moment, I don't think LineageOS community plans on helping much for now at least.
Click to expand...
Click to collapse
LineageOS developers are one of the most egoistic and toxic ones. They see everyone as newbie other than themselves. If you build Lineage, you are on your own and don't expect help from them. As I can see, the 19.1 branches aren't updated to reflect latest changes and you are building with 18.1, which you shouldn't.

LilBlinx said:
LineageOS developers are one of the most egoistic and toxic ones. They see everyone as newbie other than themselves. If you build Lineage, you are on your own and don't expect help from them. As I can see, the 19.1 branches aren't updated to reflect latest changes and you are building with 18.1, which you shouldn't.
Click to expand...
Click to collapse
But where did you see I was building with the 18.1 branch, I see LINEAGE_VERSION=19.1-20220324-UNOFFICIAL-alioth which is thus the 19.1 I did follow the tutorial from LineageOS to build the 18.1 version which I probably shouldn't have.
As for LineageOS it's like a new kind of Elite closed open source thing, never saw that before.
Any recommendation, on getting started on my own, any reading, or should I just start reading commits logs and diff from LOS 18.1/19.1 of others devices that are supported ?

AkechiShiro said:
But where did you see I was building with the 18.1 branch, I see LINEAGE_VERSION=19.1-20220324-UNOFFICIAL-alioth which is thus the 19.1 I did follow the tutorial from LineageOS to build the 18.1 version which I probably shouldn't have.
As for LineageOS it's like a new kind of Elite closed open source thing, never saw that before.
Any recommendation, on getting started on my own, any reading, or should I just start reading commits logs and diff from LOS 18.1/19.1 of others devices that are supported ?
Click to expand...
Click to collapse
Although it's old, still relevant. android_porting_guidebook

AkechiShiro said:
I have tried to build the ROM for Android12 (Lineage OS 19.1) using the code source from Gerrit and the builds fails with an error (at the step 'brunch alioth'), I have asked for help on #lineageos Libera.Chat IRC server and has received those answers "build for Android 11, if you don't know what you're doing", "we know how to solve the issue, it's easy but we won't tell you" and so on. Quite the nice community there btw, feels very welcoming.
So I can't really progress much yet, if you have any resources that could help me get started, feel free to DM me.
I've attached a screenshot of the issue, but since Lineage OS 19.1 is unofficial at the moment, I don't think LineageOS community plans on helping much for now at least. View attachment 5570271
Click to expand...
Click to collapse
19.1 branch isn't ready to build, we are still working on it. you can see the latest changes only in gerrit. Will merge once its ready. You can only build 18.1 for now or pick changes from there. https://wiki.lineageos.org/how-to/using-gerrit

althafvly said:
19.1 branch isn't ready to build, we are still working on it. you can see the latest changes only in gerrit. Will merge once its ready. You can only build 18.1 for now or pick changes from there. https://wiki.lineageos.org/how-to/using-gerrit
Click to expand...
Click to collapse
eta?

I flashed the lineage os recovery and tried to sideload lineage os however it complained about "package is for product alioth,aliothin but expected alioth". I'm new to custom roms on the poco f3 and I'm not sure what to do

LmN101 said:
I flashed the lineage os recovery and tried to sideload lineage os however it complained about "package is for product alioth,aliothin but expected alioth". I'm new to custom roms on the poco f3 and I'm not sure what to do
Click to expand...
Click to collapse
Use lineageos-18.1 recovery to flash 19 for now. It will be fixed soon.

Related

[ROM][DISCONTINUED] LineageOS 14.1 for Xiaomi Mi 5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree source code: LineageOS/android_device_xiaomi_gemini
Kernel source code: LineageOS/android_kernel_xiaomi_msm8996
Broken:
Nothing.
Working:
Everything except 'broken' stuff
(see also second post for info on recurring questions)
Compatibility:
Compatible with all Xiaomi Mi 5 variants (32GB / 64GB / 128GB). Xiaomi Mi 5S and 5S Plus are not supported.
Builds are based off the Xiaomi's Android 7.0 firmware with proprietary blobs from MIUI 8.1.4 dev package.
Downloads:
Official download links
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery (TWRP recovery for Mi 5 - Direct link)
Format /system, /data and /cache
Install LineageOS zip package
Install [optional] the LineageOS su addon to get root (there are obviously other root methods, but this is the recommended one as it survives to OTA updates)
Install [optional] a Google Apps package of your choice (Open GApps is advisable, but stock and super variants are not recommended!!!)
Important notes:
Current minimal * required * firmware version is MIUI 8.1.4 Global dev, otherwise installation will fail. Download the latest dev fastboot package directly from Xiaomi and flash it prior to installing LineageOS or, alternatively, download and install one of the latest custom packages containing firmware only (at your own risk).
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
Credits & collaborations:
This work is due to efforts from Mi5Devs founding members (@h2o64 and me) that did the full device bring-up. Huge thanks to @deovferreira for all the help during the kernel bring-up after source code dropped. Also thanks to @ValoXis for giving me the motivation I needed and to @shade.sh for compiling unofficial builds during the transition phase.
Finally, all LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Device wiki:
Official wiki link
Changelog:
LineageOS 14.1 weeklies changelog link
XDA:DevDB Information
LineageOS 14.1, ROM for the Xiaomi Mi 5
Contributors
bgcngm, Mi5Devs
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.18.x
Version Information
Status: Discontinued
Created 2016-11-17
Last Updated 2018-02-25

Some notes due to recurring questions:
Camera OIS can be recalibrated, if needed, with the following app: https://github.com/dobragab/Mi5CameraCalibrate.
Devices assembled with LGD panels may have less responsive hardware keys (recents and back) due to old touchscreen drivers released by Xiaomi. The workaround at the moment is to enable on-screen buttons and wait for more updated drivers in the next kernel source code release.
QC3.0 is not fully working and will be fixed when the next kernel source code drops.

So soon we have got cm13 official and cm14 almost stable...
thanks bgcngm and Mi5Devs team...

There we go. Too late? Could be, but we got there, in the best way we could. Mi5Devs always leading.

nice to see cm 14 for mi5 well be getting my phone soon ....thanks for ur hard work

One important note again: this is the one and only official support thread for CM-14.1 development.

Nice . At last mi5 got CM14.1 .
Btw how about CM13 ?
Is it still got updated when this CM14.1 become Official ?

Once Mi 5 moves to CM-14.1 official nightlies, CM-13.0 nigthlies will stop. That's what happens with all CM official devices.

Downloading and creating backups. As soon as i flash it, ill edit. Thanks for your work.

First of all a huge thanks to @bgcngm and mi5 devs for bringing cm-14.1 to mi5 and secondly about the camera broken stuff, are we using hal1 or hal3 camera, because when i checked the git for oneplus 3 they too had problems with hal3, hence they shifted back to hal1.

bgcngm said:
Once Mi 5 moves to CM-14.1 official nightlies, CM-13.0 nigthlies will stop. That's what happens with all CM official devices.
Click to expand...
Click to collapse
That means we'll get snapshot of cm13 ?

hope camera will be fixed soon, thats nice to have for daily use..

Vihru said:
hope camera will be fixed soon, thats nice to have for daily use..
Click to expand...
Click to collapse
Camera is working apparently, but with 3rd party apps. It's just Snap that is force closing, but should be fixed in CM sources soon enough.
Just a warning, only video recording is not working.

i had a post on CyanogenMod if anyone would do this i would really donate and you did im going to donate with 10$ For now, and i promise i will do so more and more when this keeps growing, and any tests needed or any work needed to be done to help you develop it more im available here for you.
Thank you man a lot for the work

bgcngm said:
Once Mi 5 moves to CM-14.1 official nightlies, CM-13.0 nigthlies will stop. That's what happens with all CM official devices.
Click to expand...
Click to collapse
Thanks ? ...I will install this rom when Cm14 theme engine will release.

7.0 or 7.1 gapps? Don't want to make a mistake.

Could someone upload it elsewhere? It's not feasible to download from mega.nz and I need to report bugs soon

contradriver said:
7.0 or 7.1 gapps? Don't want to make a mistake.
Click to expand...
Click to collapse
CM 14.1 -> Gapps 7.1
CM 14.0 -> Gapps 7.0

contradriver said:
7.0 or 7.1 gapps? Don't want to make a mistake.
Click to expand...
Click to collapse
I installed open gaaps arm64 7.1 and all is working good.

contradriver said:
7.0 or 7.1 gapps? Don't want to make a mistake.
Click to expand...
Click to collapse
CM 14.1 is Android 7.1

[ROM][7.1.2][MONTHLY][OMS] LineageOS 14.1 Unofficial Builds

Conserved post.
1) bean gapps are reported to not work properly.
2) Read the below posts for information about opengapps flashing.
3) How to fix YouTube :
3) YouTube fixed. No youtube problem in latest build now.
======================================
F.A.Q :
======================================
Q) Does this ROM support substratum?
A) Yes! The latest LOMS ( LOS with OMS) is fully compatible with substratum and OMS commits have been integrated into the ROM. Since substratum uses OMS, all the themes that need OMS will work on the LOMS build.
Q) Do older builds (non-LOMS) support substratum?
A) Yes. And no too. Some of the themes that need OMS commits won't work. However, the themes which have no OMS commit requirements, will work nicely in Legacy mode. Legacy mode gives you the ability to use some substratum themes, but you will need to reboot after applying any/each overlay to see effect. Hey! It's still better than no theme right?
Q) The ROM is stable enough. Why isn't it official?
A) Many reasons to answer this one lol.
1) @Rohan Taneja (OP) isn't very active with development now. He's busy with higher studies.
2) Compiling ROMs is a very tedious task. Not making it official gives us the freedom to make the builds whenever we want. In official, you have to maintain the builds and make one for the device whenever a new major/monthly update is introduced.
3) Our device. It is a MTK phone. MTK device is happily accepted as official device by almost no rom community.
4) Our choice. Deal with it.
(Please note it isn't just as easy as typing the word "official" in the thread title and build prop to make it official. Noobs please don't spam thread about this topic)
Q) (You think something else can be added here?)
A) (PM me ASAP to tell your suggestion. I'm open to PM's. And please don't send stupid PM's asking to accept friend requests and s-h-i-t like that)
(FAQ section is under construction. Check later for more)

Awesome bro,Another great ROM from you

latest opengapps arm64 not working it tells me to download arm only will it work?

asher234 said:
latest opengapps arm64 not working it tells me to download arm only will it work?
Click to expand...
Click to collapse
EDIT : Stick to beangapps till the time, I figure out a proper solution.

Rohan Taneja said:
It is due to some build.prop glitch. I have attached a fix. After flashing ROM, flash this Patch file and then flash opengapps
Click to expand...
Click to collapse
Video from the camera slows down, the sound behind the video
The mx player also plays with the brakes in hw +
I flash
Flash-memory file Lineage-14.1_buildprop
Later
Gaups okey
(But got a brick, a constant splash screen is not loaded further)
The curved arc is always constantly

derak1129 said:
Video from the camera slows down, the sound behind the video
The mx player also plays with the brakes in hw +
I flash
Flash-memory file Lineage-14.1_buildprop
Later
Gaups okey
(But got a brick, a constant splash screen is not loaded further)
The curved arc is always constantly
Click to expand...
Click to collapse
I have tested it on RR-N and made same changes for LineageOS-14.1. I had assumed it might, sorry if that is the case.
Flash Beangapps, if Opengapps are causing an issue
No need to flash the patch. I will make changes for future builds

Rohan Taneja said:
I have tested it on RR-N and made same changes for LineageOS-14.1. I had assumed it might, sorry if that is the case.
Flash Beangapps, if Opengapps are causing an issue
No need to flash the patch. I will make changes for future builds
Click to expand...
Click to collapse
beansgapps not working tested it earlier
what I did to have gapps is flash build.prop fix, flash opengapps, flash default build.prop

asher234 said:
beansgapps not working tested it earlier
what I did to have gapps is flash build.prop fix, flash opengapps, flash default build.prop
Click to expand...
Click to collapse
Yes it's another workaround for gapps, but it is just dirty hack for such an issue.
Declaring device architect as arm64 crashing the ROM is really weird part of the problem. It's only happening to LineageOS and based ROMs like ResurrectionRemix for our device.
Need to debug the build thoroughly for now.

Will it be official in future?

Jio works in this rom ?

anaandshailu said:
Will it be official in future?
Click to expand...
Click to collapse
LineageOS team would never support MTK in the meantime, even their project on Wileyfox's Spark has been officially discontinued.
Don't expect it to be official in near future
OFFICIAL is just a tag. Real Deal is the firmware, it should be good enough for daily users.
Abhignu said:
Jio works in this rom ?
Click to expand...
Click to collapse
Yes, tested myself

Hello! Can u add pls Engineer Mode to edit audio and mic values? Or it's not possible in android 7 on MTK chip's?
If this possible, add same pls in AospExtended ROM V4.2

Dumaxa said:
Hello! Can u add pls Engineer Mode to edit audio and mic values? Or it's not possible in android 7 on MTK chip's?
If this possible, add same pls in AospExtended ROM V4.2
Click to expand...
Click to collapse
Dude, engineering mode usually always exists in all ROMs. You can try to activate it using the dialer code... Google the code yourself. Don't be always dependent on us for links and stuff.

tanish2k09 said:
Dude, engineering mode usually always exists in all ROMs. You can try to activate it using the dialer code... Google the code yourself. Don't be always dependent on us for links and stuff.
Click to expand...
Click to collapse
I'm not a noob, i know that code *#*#3646633#*#*, try to insert them in [ROM] [7.1.2_r8] [OFFICIAL] [aio_row] AospExtended ROM V4.2 [OMS/DUI], and see "This rom seems to be dont have engineer mode".
That's why i'm writing that ****.
If you dont use engineer mode - i'm using it, rom which without that - not usable for me because i can't insert my volume and mic values. that because i'm asking about it.

led not working notification and black screen youtube

Thanks for the release!
Nightlies ?

which
Which gaps we will upload

haytham.toko said:
led not working notification and black screen youtube
Click to expand...
Click to collapse
I had to register on my cell's network manually before LED working...

hightech316 said:
I had to register on my cell's network manually before LED working...
Click to expand...
Click to collapse
How??

[ROM][DISCONTINUED] LineageOS 15.1 for Xiaomi Mi 5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android 8.1 (Oreo), which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (gapps). LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Base source code is available in the LineageOS Github repo. And if you would like to contribute to the project, please visit our Gerrit Code Review.
GPL compliance:
Device tree source code: LineageOS/android_device_xiaomi_gemini
Kernel source code: LineageOS/android_kernel_xiaomi_msm8996
Broken:
Nothing?
Working:
Camera (and flashlight)
WiFi
NFC
Bluetooth
Telephony (Calls and Data)
Audio (Record and Playback)
Video Playback
Sensors
GPS
VoLTE
Compatibility:
Compatible with all Xiaomi Mi 5 variants (32GB / 64GB / 128GB). Xiaomi Mi 5S and 5S Plus are not supported.
Builds are based off the Xiaomi's Android 8.0 firmware with proprietary blobs from MIUI 8.5.10 dev package.
Downloads:
Official download links
Notice:
No custom kernels are supported in this thread. Only stock kernel and official builds will be supported. No bug reports if that's not the case.
Installation:
Reboot to recovery (TWRP recovery for Mi 5 - Direct link)
Format /system, /data and /cache
Install LineageOS zip package
Install [optional] the LineageOS su addon to get root (there are obviously other root methods, but this is the recommended one as it survives to OTA updates)
Install [optional] a Google Apps package of your choice (Open GApps is advisable, but stock and super variants are not recommended!!!)
Important notes:
Current minimal * required * firmware version is MIUI 8.5.10 Global dev, otherwise installation will fail. Download the latest dev fastboot package directly from Xiaomi and flash it prior to installing LineageOS or, alternatively, download and install one of the latest custom packages containing firmware only - direct link (at your own risk).
GApps can only be flashed on clean installs.
Formatting data (all user data is wiped, including internal storage) is a must if MIUI was previously installed and device was encrypted.
Credits & collaborations:
This work is due to efforts from Mi5Devs founding members (@h2o64 and me) that did the full device bring-up. Huge thanks to @deovferreira for all the help during the kernel bring-up after source code dropped. Last but not least, pleasure having @luca020400 and @LuK1337 onboard since the bring-up of the whole Xiaomi 8996 family, that lately did the major work in the O era.
Finally, all LineageOS team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Device wiki:
Official wiki link
Changelog:
LineageOS 15.1 weeklies changelog link
XDA:DevDB Information
LineageOS 15.1, ROM for the Xiaomi Mi 5
Contributors
bgcngm, Mi5Devs
ROM OS Version: 8.1 Oreo
ROM Kernel: Linux 3.18.71
ROM Firmware Required: MIUI 8.5.10 dev
Version Information
Status: Nightly
Created 2017-09-07
Last Updated 2018-02-25

Keep in mind that for now this is just an alpha, take it like an early preview. Quite a lot hasn't yet been ported to Lineage, so please don't report issues like: "broken buttons backlight".

Unofficial Gapps here: https://www.androidfilehost.com/?fid=889764386195926952

so finally here

Amazing, Thank You for your effort

guys remember gapps 8.0 isn't proper once you install los and then install gapps and once the installer says installation complete do a force reboot

Finally Lineage OS 15 for Mi5 is up. I've been waiting for this eagerly since August. Thanks a lot devs. Great Effort. And please guys support our devs to give their best effort for our device. Hurray

didn't notice earlier amigo good job =)

amazing rom ! thanks for your work.
---------- Post added at 10:23 AM ---------- Previous post was at 10:18 AM ----------
so which fw should i flash ?

you made my day thanks Bruno! will wait for camera working though but really appreciated!!

Bianfuchen said:
so which fw should i flash ?
Click to expand...
Click to collapse
You must be really lazy to read... or blind maybe.

wow, so fast, waiting for next stable release soon. thank you anyway...

Finally, los 15 for our device landing.
Incredible work guys, good job.

bgcngm said:
You must be really lazy to read... or blind maybe.
Click to expand...
Click to collapse
Sorry if i am missing somewhere. but i can't find that buttons tab which is in los 14.1???

Plabon7 said:
Sorry if i am missing somewhere. but i can't find that buttons tab which is in los 14.1???
Click to expand...
Click to collapse
Read op post . Button feature isn't implemented yet

Oh really thanks man
We are wating for stable version . . .
But im going to test that and report you ?

and OTA updates will it be updated?
and OTA updates will it be updated?

mamay68rus said:
and OTA updates will it be updated?
Click to expand...
Click to collapse
There will be no OTA updates. I will release new builds when I think it's time to.

bgcngm said:
There will be no OTA updates. I will release new builds when I think it's time to.
Click to expand...
Click to collapse
When LOS 15 will become official, LOS 14 support will instantly end, right?

RootNightmareX said:
When LOS 15 will become official, LOS 14 support will instantly end, right?
Click to expand...
Click to collapse
That's how it always has been, once a device starts with official builds in a new branch, builds stop on the old one.

[ROM]LineageOS-16.0 + LineageOS-17.1[Joan][Unofficial]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device.
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review. You can also view the LineageOS Changelog for a full list of changes & features. For a changelog of changes to my builds, they can be found at this post below.
Code:
#include "std_disclaimer.h"
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is now a "joan" build! This means this is universal and should boot on all LG v30 devices that a custom recovery can be installed to. This includes the illusive h932 model!
The name of "joan" comes from the code name used by LG in a lot of their source code for this device.
BIG SHOUTOUT TO TO SGCMarkus! A lot of this would not be possible without the work he continues to do on these devices.
What's working:
RIL (Calls, SMS, Data)
Fingerprint
Wi-Fi
Bluetooth
Camera
Video Recording
Video Playback
Audio
Sensors
Flash
GPS
DAC
Vibration
Selinux permissive (Selinux has issues.. See FAQ)
What's not working:
VOLTE does not work on either ROM
VOWIFI does not work on either ROM
Wifi display on Lineage 17.1
Tell me
Where are the features?
LineageOS is in development process so don't complain about xyz features missing.
Instructions:
Download the build
Reboot to recovery
Flash the latest build
Reboot
V30 Telegram group chat
Downloads:
17.1: Universal builds can be found at GitHub
This now should boot on any LG v30 including h932!
This release requires pie firmware to be flashed.
Make sure to flash the correct firmware for your model of LG v30.
16.0:
Universal builds can be found at GitHub
This now should boot on any LG v30 including h932!
For now this release requires oreo firmware to be flashed.
Make sure to flash the correct firmware for your model of LG v30.
Sources:
Universal Device Tree: joan
Kernel: msm8998
Vendor: lge
lineage-16.0/17.0 branch
XDA:DevDB Information
[ROM]LineageOS-16.0 + LineageOS-17.0[Joan][Unofficial], ROM for the LG V30
Contributors
ShapeShifter499, https://github.com/LineageOS/
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Oreo (LOS 16.0), Pie (17.1)
Based On: LineageOS
Version Information
Status: Alpha
Created 2020-01-29
Last Updated 2020-10-03
Donations
This ROM is released for free but a lot of time goes into making this work.
The cost of running a computer 24/7 to compile these builds for everyone isn't free either.
If you'd like to donate to support this project you can do so below.
Ko-fi/Paypal: https://ko-fi.com/shapeshifter499
XDA:DevDB Information
[ROM]LineageOS-16.0 + LineageOS-17.1[Joan][Unofficial], ROM for the LG V30
Contributors
ShapeShifter499, SGCMarkus, rashed97
Source Code: https://github.com/LineageOS/
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Oreo (16.0), Pie (17.1)
Based On: LineageOS
Version Information
Status: Alpha
Created 2020-01-29
Last Updated 2020-10-04

Reporting Bugs
DO NOT Report bugs if you're running a custom kernel or you installed Xposed
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab dmesg . (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
If the problem disappears after running "setenforce 0" from a root shell, grab /data/misc/audit/audit.log
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Builds are done nightly if possible. The changelogs below get updated when there is a major change by me that fixes an issue with LG v30s.
Changelogs
LOS 17.1 Release 10.14.2020
Updates LOS Sources (October 2020 Security Patch, and some other features)
Change device fingerprint to pass SafetyNet
LOS 16.0 Release 10.14.2020
Updates LOS Sources (October 2020 Security Patch, and some other features)
Change device fingerprint to pass SafetyNet
LOS 17.1 Release 10.03.2020
Rename build to joan. This is now a unified build that should work universally on all LG v30s there are.
Updates LOS Sources (September 2020 Security Patch, and some other features)
Fix offline charging issue
Downrev audio to 4.0, fixes some audio related crashes
joan-common: Fix qti_whitelist typo
LOS 16.0 Release 10.03.2020
Rename build to joan. This is now a unified build that should work universally on all LG v30s there are.
Updates LOS Sources (September 2020 Security Patch, and some other features)
Set SELinux in kernel to permissive.
LOS 16.0 Release 09.03.2020
Updates LOS Sources (August 2020 Security Patch, and some other features)
Fix AVC reset bug for DAC.
LOS 16.0 Release 06.29.2020
Updates LOS Sources (June 2020 Security Patch, and some other features)
joan-common: Fix qti_whitelist typo
Add Spint APNs fix
LOS 16.0 Release 05.01.2020
Updates LOS Sources (April 2020 Security Patch, and some other features)
Added Samsung sdFAT driver to support exFAT formated SD Cards with help from @SGCMarkus, for both h930 and h932 builds.
Enable F2FS support for both h930 and h932 builds.
LOS 16.0 Release 02.08.2020
Updates LOS Sources (February 2020 Security Patch, and some other features)
joan-common: Readd required vendor prop for oreo blobs
LOS 16.0 Release 02.07.2020
Updates LOS Sources (January 2020 Security Patch, and some other features)
joan-common: Fix FM
LOS 16.0 Release 01.29.2020
Updates LOS Sources (January 2020 Security Patch, and some other features)
joan-common: Fix NFC configuration

Frequently Asked Questions:
Q. Can this ROM be flashed through TWRP?
A. Yes, proceed with the latest TWRP image
Q. Sounds good. How can I contribute to project?
A. Test the build as much as you can and report bugs which can be reproduced with exact steps and are not random.
Q. How to disable "Apps running in background" dialog?
A. When you see the dialog, long press on it and select "Settings". From there, you'll have a toggle to disable it.
Q. Which Models are supported?
A. So far it works well on the H930(G/D/DS), US998, VS996 and LS998. H932 works too, use the .zip for that model. Other devices may bootloop.
Q. Help, my H931/H933 is bootlooping!
A1. For H931 please go to https://forum.xda-developers.com/lg-v30/how-to/running-h930-aosp-rom-us998-converted-t3889320
A2. For H933 please go to https://forum.xda-developers.com/showpost.php?p=78183349&postcount=2
Q. What is up with SELinux?
A. There are a lot of SELinux permissions that have not been properly added. If you experience any issues try setting the kernel to permissive mode first. If you continue to experience issues after that. Then take logs and let me know. To set permissive mode flash this zip in TWRP or other custom recovery: https://zackptg5.com/downloads/Kernel-Sepolicy-Patcher.zip Make sure to select permissive with volume buttons. This should be flashed after every new ROM release unless otherwise stated.
Q. Any other resources I should be aware of?
A. Check out this mega thread on troubleshooting LG v30 issues by @tech_infinity https://forum.xda-developers.com/lg-v30/how-to/detailed-guide-aosp-roms-issues-solution-t4002535

RESERVED

can you please provide rom link ?

toocool4all said:
can you please provide rom link ?
Click to expand...
Click to collapse
I did, they are at my github. https://github.com/ShapeShifter499/LG_v30-LineageOS_Manifest/releases Check the list for the latest build and make sure it's correct for your device. H930 is universal and H932 is ONLY for T-Mobile

Hey,
thx for your time in developing and building this ROM for our beloved LG V30!
Anyway: Why do you build again a new LOS "16.0" and not work together with @SGCMarkus on "17.1" Release?
Just a thought...

FcBayernMinga said:
Hey,
thx for your time in developing and building this ROM for our beloved LG V30!
Anyway: Why do you build again a new LOS "16.0" and not work together with @SGCMarkus on "17.1" Release?
Just a thought...
Click to expand...
Click to collapse
Because @SGCMarkus has moved on to 17.1, so he can work on this 16 and fix stuff. Then, move on to 17.1.
He's still figuring it all out. Something to practice on?
I'm not speaking for the Dev. He can answer himself, but that seems the simplest explanation.

FcBayernMinga said:
Hey,
thx for your time in developing and building this ROM for our beloved LG V30!
Anyway: Why do you build again a new LOS "16.0" and not work together with @SGCMarkus on "17.1" Release?
Just a thought...
Click to expand...
Click to collapse
I was talking with @SGCMarkus and he mentioned wanting to focus all his efforts at getting 17 working. But 16 will still be supported for sometime and doesn't have as many changes in store to work around. It's much easier to iron out and get fully working with little to no bugs. But we are sort of working towards the same goals. If there is anything I happen to find about getting things working I'll let him know, I hope he does the same.

Thanks for doing this. I'm not ready to move on to 17.0 because of the issues and have been a little bummed that the other 16.0 ROM hasn't been updated since I first installed it (I got the phone in August). I've missed the fun of updating the ROM regularly that's part of the reason why I picked this model. Even if I don't notice any differences, it makes me happier knowing that I have a more recent LOS build.

Thank you for the updated builds ?
Is there any chance of Pie blobs builds happening?

mishamosher said:
Thank you for the updated builds ?
Is there any chance of Pie blobs builds happening?
Click to expand...
Click to collapse
+1 Thank You @ShapeShifter499!
gf's H930DS was unfortunately updated to stock pie at some point, so it's either Stock or Alpha LOS17. Would this work, it would be perfect.
@ShapeShifter499
> I was talking with @SGCMarkus and he mentioned wanting to focus all his efforts at getting 17 working.
That's interesting, haven't seen any updates from Markus on git, telegram or xda in a while.

Hujkis said:
+1 Thank You @ShapeShifter499!
gf's H930DS was unfortunately updated to stock pie at some point, so it's either Stock or Alpha LOS17. Would this work, it would be perfect.
@ShapeShifter499
> I was talking with @SGCMarkus and he mentioned wanting to focus all his efforts at getting 17 working.
That's interesting, haven't seen any updates from Markus on git, telegram or xda in a while.
Click to expand...
Click to collapse
Markus made a los17.1 build but that had camera issues so didn't release it.
Don't worry Markus is still maintaining LOS for v30
For los17 is not just change in android version but for v30 we've switched from oreo blobs to pie blobs. That's why there are some issues and are taking time to resolve.

Hujkis said:
+1 Thank You @ShapeShifter499!
gf's H930DS was unfortunately updated to stock pie at some point, so it's either Stock or Alpha LOS17. Would this work, it would be perfect.
@ShapeShifter499
> I was talking with @SGCMarkus and he mentioned wanting to focus all his efforts at getting 17 working.
That's interesting, haven't seen any updates from Markus on git, telegram or xda in a while.
Click to expand...
Click to collapse
Been busy with university (exams and so on...), and during christmas holiday kinda had no motivation todo something lol
But now im on semester break, and already started to prepare to start working on LOS17.1

Markus, first of all thank you for all your hard efforts and dedication to this ROM. I was wondering whether the static noise when video calling was fixed on LOS16. If not I plan on switching over to LOS17. Thank you and God bless ?

jkim204 said:
Markus, first of all thank you for all your hard efforts and dedication to this ROM. I was wondering whether the static noise when video calling was fixed on LOS16. If not I plan on switching over to LOS17. Thank you and God bless
Click to expand...
Click to collapse
That bug is present on both los16 and los17, hasn't been fixed yet.

tech_infinity said:
That bug is present on both los16 and los17, hasn't been fixed yet.
Click to expand...
Click to collapse
Ahh that's sad news. Thank you though. Are all other custom ROMs the same way?

jkim204 said:
Ahh that's sad news. Thank you though. Are all other custom ROMs the same way?
Click to expand...
Click to collapse
All other custom ROMs are based on sources by SGCMarkus so any source bugs will be present on all ROMs!
Basically if something is broken on LOS for v30 then it'll most probably be broken on all other ROMs

tech_infinity said:
All other custom ROMs are based on sources by SGCMarkus so any source bugs will be present on all ROMs!
Basically if something is broken on LOS for v30 then it'll most probably be broken on all other ROMs
Click to expand...
Click to collapse
In Havoc 3.1 when connecting the phone to the usb of the PC does not recognize it, do you know if it is only a Havoc bug or for all Q roms? thanks

Letsweb said:
In Havoc 3.1 when connecting the phone to the usb of the PC does not recognize it, do you know if it is only a Havoc bug or for all Q roms? thanks
Click to expand...
Click to collapse
I've had no issues connecting to PC on Q roms

[RECOVERY][UNOFFICIAL] ORANGEFOX RECOVERY PROJECT - R11.1_4 [15/07/2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
- UNIFIED FBE BUILD -
THIS RECOVERY
SUPPORTS BOTH FBEv1 & FBEv2 ROMSRequirements to flash this recovery
• Basic ADB & fastboot knowledge
• Unlocked bootloader
• Platform tools
Flashing Instructions
• Download the recovery zip file on your PC
• Download and extract latest platform tools
• Extract the recovery.img file from the zip file to the platform tools folder
Using fastboot method:
• Reboot the device into fastboot/bootloader mode
• Open CMD/Terminal in the platform tools folder
• For booting only, use this command:
Code:
fastboot boot recovery.img
• For flashing, use this command:
Code:
fastboot flash recovery recovery.img
Using ADB sideload method:
• Reboot to existing AOSP/Custom Recovery
• Enable ADB sideload feature
• Copy the recovery zip file to platform tools folder
• Open CMD/Terminal in the platform tools folder
• Use this command:
Code:
adb sideload OrangeFox-R11.1_4-Unofficial-avicii.zip
DOWNLOAD
Telegram Support Group
If you like my hardwork please support me by donating
UPI : [email protected]
PayPalMaintainer: Sreeshankar K
Recovery Source: https://gitlab.com/OrangeFox
Device Tree: https://github.com/Sanju0910/orangefox_device_oneplus_avicii
Kernel Source: Prebuilt kernel from OOS12 AC2003_11_F.19
Credits:
• The TeamWin team - for the TeamWin Recovery Project
• The OrangeFox Team - for the OrangeFox Recovery Project
• AndroiableDroid - for the Unified FBE implementation

Reserved

Reserved

Reserved

thanks

So this means i can simply flash this on recovery partition although I'm running stock OOS12 and it will boot into Orangefox?

TheSSJ said:
So this means i can simply flash this on recovery partition although I'm running stock OOS12 and it will boot into Orangefox?
Click to expand...
Click to collapse
Yes. I own OnePlus Nord (avicii) and I tested it. So trust me.

This recovery (OrangeFox-R11.1_4-Unofficial-avicii.zip) recognizes that I have LineageOS 20 installed and that the data partition is encrypted, but unfortunately does not offer me the decryption dialog.
When I try to decrypt the data partition from the menu, I get a password dialog but no swipe pattern.

Doc Sniper said:
This recovery (OrangeFox-R11.1_4-Unofficial-avicii.zip) recognizes that I have LineageOS 20 installed and that the data partition is encrypted, but unfortunately does not offer me the decryption dialog.
When I try to decrypt the data partition from the menu, I get a password dialog but no swipe pattern.
Click to expand...
Click to collapse
Not recovery issue. I already told this to the LineageOS maintainer. He NVM it. LineageOS issue. Contact your LineageOS maintainer.
Tell him to fix it. Nothing to do from my side.
OOS12 decryption works without any issues. OOS12 is also FBEv1 rom.
android_device_oneplus_avicii/vendor.prop at lineage-20 · LineageOS/android_device_oneplus_avicii
Contribute to LineageOS/android_device_oneplus_avicii development by creating an account on GitHub.
github.com
android_device_oneplus_avicii/vendor.prop at lineage-20 · LineageOS/android_device_oneplus_avicii
Contribute to LineageOS/android_device_oneplus_avicii development by creating an account on GitHub.
github.com

Sreeshankar K said:
Not recovery issue. I already told this to the LineageOS maintainer. He NVM it. LineageOS issue. Contact your LineageOS maintainer.
Tell him to fix it. Nothing to do from my side.
android_device_oneplus_avicii/vendor.prop at lineage-20 · LineageOS/android_device_oneplus_avicii
Contribute to LineageOS/android_device_oneplus_avicii development by creating an account on GitHub.
github.com
android_device_oneplus_avicii/vendor.prop at lineage-20 · LineageOS/android_device_oneplus_avicii
Contribute to LineageOS/android_device_oneplus_avicii development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
Thanks for the hint, I didn't catch that.
Based on my experiences with him, I would rate this person as you describe.
Thanks in any case for your efforts regarding the Nord custom ROMs.

Doc Sniper said:
Thanks for the hint, I didn't catch that.
Based on my experiences with him, I would rate this person as you describe.
Thanks in any case for your efforts regarding the Nord custom ROMs.
Click to expand...
Click to collapse
If you need vanilla rom with customisation. There is RisingOS AOSP.

Sreeshankar K said:
If you need vanilla rom with customisation. There is RisingOS AOSP.
Click to expand...
Click to collapse
I've been using LineageOS / CyanogenMod since the early days of Android, so switching is hard.
But thanks for the tip, I'll take a look and maybe even consider switching.
But I'm also thinking of buying either the Nord 3 or the 11 or 11T this year and thus the "maintainer issue" would be solved .

Sreeshankar K said:
Not recovery issue. I already told this to the LineageOS maintainer. He NVM it. LineageOS issue. Contact your LineageOS maintainer.
Tell him to fix it. Nothing to do from my side.
OOS12 decryption works without any issues. OOS12 is also FBEv1 rom.
android_device_oneplus_avicii/vendor.prop at lineage-20 · LineageOS/android_device_oneplus_avicii
Contribute to LineageOS/android_device_oneplus_avicii development by creating an account on GitHub.
github.com
android_device_oneplus_avicii/vendor.prop at lineage-20 · LineageOS/android_device_oneplus_avicii
Contribute to LineageOS/android_device_oneplus_avicii development by creating an account on GitHub.
github.com
Click to expand...
Click to collapse
LineageOS is open source software.
Everybody is able to contribute by submitting patches / commits via our official gerrit server at https://review.lineageos.org
So instead of complaining you could just submit the required code for supporting this custom recovery.
This is just not a priority topic for me as I only focus on official LineageOS features / tools like LineageOS recovery. This is why I did not do it myself.
Also:
I provided a lot of code to the OnePlus Nord custom ROM scene on which your work / ROMs @Sreeshankar K are heavily based on.
I consider it rude to say something like "maintainer issue".
This goes especially in your direction @Doc Sniper.

MajorP93 said:
LineageOS is open source software.
Everybody is able to contribute by submitting patches / commits via our official gerrit server at https://review.lineageos.org
So instead of complaining you could just submit the required code for supporting this custom recovery.
This is just not a priority topic for me as I only focus on official LineageOS features / tools like LineageOS recovery. This is why I did not do it myself.
Also:
I provided a lot of code to the OnePlus Nord custom ROM scene on which your work / ROMs @Sreeshankar K are heavily based on.
I consider it rude to say something like "maintainer issue".
This goes especially in your direction @Doc Sniper.
Click to expand...
Click to collapse
It's always funny how people think that only because you volunteered to make LOS official for our Nord, you automatically take on the support and do everything for free and now
A little Google and due diligence and there would be less "misunderstandings" and misjudgements from people

MajorP93 said:
LineageOS is open source software.
Everybody is able to contribute by submitting patches / commits via our official gerrit server at https://review.lineageos.org
So instead of complaining you could just submit the required code for supporting this custom recovery.
This is just not a priority topic for me as I only focus on official LineageOS features / tools like LineageOS recovery. This is why I did not do it myself.
Also:
I provided a lot of code to the OnePlus Nord custom ROM scene on which your work / ROMs @Sreeshankar K are heavily based on.
I consider it rude to say something like "maintainer issue".
This goes especially in your direction @Doc Sniper.
Click to expand...
Click to collapse
"What goes around comes around."
Well, you could have said to @Sreeshankar K last time exactly what you were writing right before. Namely that a working OF-Recovery with LOS is low priority for you and he could contribute code to speed that thing up - done.
Then he would have been informed nicely and would have passed on this surely just as positively also in relation to your person. So I guess @Sreeshankar K took your last answer as "I don't give a damn".
Just like this sentence: "... Also: I provided a lot of code to the OnePlus Nord custom ROM scene on which your work / ROMs @Sreeshankar K are heavily based on. ...". My only thoughts on this are, how can one be so condescending.
When you're that snooty, don't be surprised if you're not respected. Even if you have done a lot as a diligent maintainer, you should always be as respectful to others, as you would like to be respected yourself.
Remember, "it's not what you say, but how you say it" and always consider, others may have far more education, knowledge and experience than you. Live humbly.
Well, anyway, if you felt offended from "m.i.", then I'm sorry.

Doc Sniper said:
"What goes around comes around."
Well, you could have said to @Sreeshankar K last time exactly what you were writing right before. Namely that a working OF-Recovery with LOS is low priority for you and he could contribute code to speed that thing up - done.
Then he would have been informed nicely and would have passed on this surely just as positively also in relation to your person. So I guess @Sreeshankar K took your last answer as "I don't give a damn".
Just like this sentence: "... Also: I provided a lot of code to the OnePlus Nord custom ROM scene on which your work / ROMs @Sreeshankar K are heavily based on. ...". My only thoughts on this are, how can one be so condescending.
When you're that snooty, don't be surprised if you're not respected. Even if you have done a lot as a diligent maintainer, you should always be as respectful to others, as you would like to be respected yourself.
Remember, "it's not what you say, but how you say it" and always consider, others may have far more education, knowledge and experience than you. Live humbly.
Well, anyway, if you felt offended from "m.i.", then I'm sorry.
Click to expand...
Click to collapse
I don't think my post sounded condescending, it was not meant that way.
I only mentioned my contributions towards Nord custom ROM community to make you think about calling my work a maintainer issue.
To be honest I feel disrespected after spending so many hours developing for this community and getting called something like that.
Anyways I accept your apology.

MajorP93 said:
I don't think my post sounded condescending, it was not meant that way.
I only mentioned my contributions towards Nord custom ROM community to make you think about calling my work a maintainer issue.
To be honest I feel disrespected after spending so many hours developing for this community and getting called something like that.
Anyways I accept your apology.
Click to expand...
Click to collapse
Don't get me wrong, I don't want to criticize your work and your achievements at all and also I don't want to demand anything regarding the ROM. My criticism has only ever been about the fact that I, as well as a few other people, have perceived some statements in the past as condescending. Since you certainly didn't mean it that way, maybe just work on "how you say it".
You donate your free time, so I would like to say quite clearly that I certainly appreciate your work and your effort with the Nord 1 LOS very well.
Thank you.

Never made any contributions to either OrangeFox or LOS but I have some programming experience. Is this somewhat easily fixable, what goes into something like this? Would love to contribute something myself but don't know where to start.

Develop Bugs

welcome