Hello . I just got android 12 on my 9 Pro it's T-Mobile variant. Took months to arrive
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How's the update?
freshlysqueezed said:
How's the update?
Click to expand...
Click to collapse
I installed it a couple of hours ago. Things that I have noticed. Custom notifications only play for up to 5 seconds, if you change your minimum width in developer settings, it reverts upon boot although my Pixel 6 Pro does that too, and it turned my blue digital clock on my home screen lavender and I can't change it back. They also added the Google/T-Mobile screen on the very left and I haven't found the way to turn it off yet.
My wife also got the update to 12 on her OnePlus 9.
Can anyone that has updated their T-Mobile variant to a12 and has root install Network Signal Guru and see if when you force your phone to NR only and run a speed test if you get n71-n41 CA? Also can anyone pull the updated modem image and share it?
jeffsga88 said:
Can anyone that has updated their T-Mobile variant to a12 and has root install Network Signal Guru and see if when you force your phone to NR only and run a speed test if you get n71-n41 CA? Also can anyone pull the updated modem image and share it?
Click to expand...
Click to collapse
I get n71& n41 on TMobile 9 pro converted to global with c47
twinnfamous said:
I get n71& n41 on TMobile 9 pro converted to global with c47
Click to expand...
Click to collapse
You can get both n71 & n41 in NSA mode but they disabled n41 in SA mode (NR only) on a12. It mainly only affects if you force it to NR only mode (which I don't recommend unless your market has reliable VoNR active) and you want the n71-n41 SA CA, I'm NSA mode (NR / LTE) it has no real affect (unless T-Mobile decides to enable n71-n41 CA in NSA mode).
truckerdewd said:
I installed it a couple of hours ago. Things that I have noticed. Custom notifications only play for up to 5 seconds, if you change your minimum width in developer settings, it reverts upon boot although my Pixel 6 Pro does that too, and it turned my blue digital clock on my home screen lavender and I can't change it back. They also added the Google/T-Mobile screen on the very left and I haven't found the way to turn it off yet.
My wife also got the update to 12 on her OnePlus 9.
Click to expand...
Click to collapse
The Google/T-Mobile thing is from T-Mobile play. I removed it with adb and it went away. Now it looks like the normal Google discover page.
With new update OEM unlocking is now available. Can we now root and install custom ROMS? Is there twrp available for us yet? Sorry havent been in the root game for years n hope someone can point me in right direction or to even convert to global. Thanks n sorry in advance if answer is easy to find. I havent had phone that was rootable for years n im wondering if this is a over sight by oneplus cuz my phone is not paid off lol and OEM unlocking is usually grayed out
jeffsga88 said:
You can get both n71 & n41 in NSA mode but they disabled n41 in SA mode (NR only) on a12. It mainly only affects if you force it to NR only mode (which I don't recommend unless your market has reliable VoNR active) and you want the n71-n41 SA CA, I'm NSA mode (NR / LTE) it has no real affect (unless T-Mobile decides to enable n71-n41 CA in NSA mode).
Click to expand...
Click to collapse
Wait. Because on global C44 update I had working band 41. You're telling me the T-Mobile version loses band 41 as well? It's the only band I get usable data at home with.
in old versions and all other phones n41 gave me 40+Mbps at home. Randomly I've gotten 150+Mbps. With this new A12 I'm stuck only getting maximum 20 but realistically 1-5.
Fatmonk8 said:
The Google/T-Mobile thing is from T-Mobile play. I removed it with adb and it went away. Now it looks like the normal Google discover page.
Click to expand...
Click to collapse
I don't want the left page period. Unfortunately, looks like we are stuck with it. I read an article that said there is no way to remove it just like being stuck with only having 5 seconds for custom notification sounds.
truckerdewd said:
I don't want the left page period. Unfortunately, looks like we are stuck with it. I read an article that said there is no way to remove it just like being stuck with only having 5 seconds for custom notification sounds.
Click to expand...
Click to collapse
Oh, I don't mind it. I like having Google discover there to read news.
Thereplierbro said:
Wait. Because on global C44 update I had working band 41. You're telling me the T-Mobile version loses band 41 as well? It's the only band I get usable data at home with.
in old versions and all other phones n41 gave me 40+Mbps at home. Randomly I've gotten 150+Mbps. With this new A12 I'm stuck only getting maximum 20 but realistically 1-5.
Click to expand...
Click to collapse
No, that's not what I'm saying. B41 / N41 works on every version of a11 and a12. The difference is that since a12 on the global release at least n41 SA (only connecting to 5G stand alone, not aggregating with LTE) was disabled. N41 in NSA mode (NR + LTE still works without an issue on n41/n71) still works as normal. Was just trying to see if the T-Mobile a12 update had 41 SA enabled since global still doesn't.
jeffsga88 said:
No, that's not what I'm saying. B41 / N41 works on every version of a11 and a12. The difference is that since a12 on the global release at least n41 SA (only connecting to 5G stand alone, not aggregating with LTE) was disabled. N41 in NSA mode (NR + LTE still works without an issue on n41/n71) still works as normal. Was just trying to see if the T-Mobile a12 update had 41 SA enabled since global still doesn't.
Click to expand...
Click to collapse
Ok. So in NSG I always would only use n41 to get my fast speed at home. So tonight I'll try n41/71 to see if I can get those fast speeds again.
And I noticed this slower speed only in c47 not in C44 for the short amount of time I had it fwiw.
I considered swapping back to TMobile version because Sprint/T-Mobile is the only carrier that uses this band in USA. So maybe they activate it on their phones.
Edit: important also to add I had to use the magisk data module to even get data at all because of the two sim card thing. Since we have two you have to trick it to use one or whatever
Thereplierbro said:
Ok. So in NSG I always would only use n41 to get my fast speed at home. So tonight I'll try n41/71 to see if I can get those fast speeds again.
And I noticed this slower speed only in c47 not in C44 for the short amount of time I had it fwiw.
I considered swapping back to TMobile version because Sprint/T-Mobile is the only carrier that uses this band in USA. So maybe they activate it on their phones.
Edit: important also to add I had to use the magisk data module to even get data at all because of the two sim card thing. Since we have two you have to trick it to use one or whatever
Click to expand...
Click to collapse
Yeah, would be interesting to see if the a12 T-Mobile update has n41 SA re-enabled or not. Frustrating that they removed it from the global US a12 updates though. Not familiar with the data module that you had to use since I have the unlocked version, but wouldn't think it would change anything, unless it's reflashing the modem from a11, which then n41 SA should still be enabled. Why I was hoping someone would post their a12 T-Mobile modem. I would try and flash it on my unlocked variant and see if it enabled it or not (if it would even boot with it). If you do update to the T-Mobile a12, could you pull your modem.img and post it?
jeffsga88 said:
Yeah, would be interesting to see if the a12 T-Mobile update has n41 SA re-enabled or not. Frustrating that they removed it from the global US a12 updates though. Not familiar with the data module that you had to use since I have the unlocked version, but wouldn't think it would change anything, unless it's reflashing the modem from a11, which then n41 SA should still be enabled. Why I was hoping someone would post their a12 T-Mobile modem. I would try and flash it on my unlocked variant and see if it enabled it or not (if it would even boot with it). If you do update to the T-Mobile a12, could you pull your modem.img and post it?
Click to expand...
Click to collapse
Yeah. I'll reflash to T-Mobile and root. Extract the modem and see what it does for you. IDK too much but I'm pretty sure I can back it up with partition backup and upload. Where can I upload?
Modem A and B correct?
Thereplierbro said:
View attachment 5575067
Modem A and B correct?
Click to expand...
Click to collapse
Not sure if partition backup uses .img for backup or not. If so it should be fine, if not wouldn't work. I usually just use the MSM tool to pull the partitions. All you have to do is open MSM tool, press F11, choose modem_a and modem_b, password is OnePlus and hit okay. After, put phone in EDL and connect to computer and hit the read back option in MSM tool. It will save the files to your C: drive. It's also a great way to root newer updates when we don't have the full download, we can just use it to pull boot.img and patch it. Either way just upload to wherever GDrive, mega, whatever and post link. I appreciate it.
jeffsga88 said:
Not sure if partition backup uses .img for backup or not. If so it should be fine, if not wouldn't work. I usually just use the MSM tool to pull the partitions. All you have to do is open MSM tool, press F11, choose modem_a and modem_b, password is OnePlus and hit okay. After, put phone in EDL and connect to computer and hit the read back option in MSM tool. It will save the files to your C: drive. It's also a great way to root newer updates when we don't have the full download, we can just use it to pull boot.img and patch it. Either way just upload to wherever GDrive, mega, whatever and post link. I appreciate it.
Click to expand...
Click to collapse
Seems from discussion on the telegram the guys think it's a waste of time...
Thereplierbro said:
Seems from discussion on the telegram the guys think it's a waste of time...
Click to expand...
Click to collapse
Updating to a12? Very possible. I've heard issues with T-Mobile a12 update. There's also still plenty of issues with global a12 update. As far as modem, I was just curious if they enabled other bands on T-Mobile modem compared to the global one. I can always look later and see if the link to the full T-Mobile a12 update has been posted, if so I can just extract it myself.
jeffsga88 said:
Updating to a12? Very possible. I've heard issues with T-Mobile a12 update. There's also still plenty of issues with global a12 update. As far as modem, I was just curious if they enabled other bands on T-Mobile modem compared to the global one. I can always look later and see if the link to the full T-Mobile a12 update has been posted, if so I can just extract it myself.
Click to expand...
Click to collapse
No they said flashing the modem results in a brick
Related
[ROM][4.4.2][LG G3 Port][6-29-2014]2FacedRom 1.6/1.7.1x Stock, Debloated, US GSM Unlocked
Please read everything before downloading and blindly installing!
Firstly, this ROM does install properly, it does boot, if you brick your phone while running this ROM chances are it was something YOU did and not the ROM, do not blame me. Secondly, I will keep this as up to date and fix things or add things as often as I can there is a Requested Features tab at the top and if you want something you need to say it there. There is also a Report Bugs tab at the top, same applies. I am the only person maintaining this project right now and I cannot read every post in this thread but I will do my best to stay on top of everything.
The rom is a port from the UK LG G3 but options for GSM or CDMA capabilities are select-able in Aroma. NFC does not work currently and may not work until the LS990 is released and dumped.
The CDMA configurations is still buggy and I am working on fixing it, update 1.7 will see a lot of fixes to the CDMA configuration. The phone app crashes when trying to call out but the phone can receive calls when CDMA is selected on install. Thats the biggest problem I've found so far.
v1.6
Changlog in 3rd post
Moderator Edit: Link Removed
MD5: 8920b27fd59e08bae905d27266605d79
Working:
Pretty much everything except what is listed below
Not Working:
NFC (Both CDMA and GSM)
Calling Out (CDMA Only)
Settings FC on some menus (CDMA Only)
1.7.1 Experimental!
CDMA ONLY
For SMS/MMS use Hangouts!
Data does work but you cannot Enable/Disable it in settings or change network settings.
The phone will show "Roaming" but it won't actually be roaming.
Since this is experimental and for CDMA ONLY, only install with a clean flash.
Do not install if you are on a GSM network, for GSM stay with 1.6
To Install if coming from other ROM or 2Faced 1.0
1. Must be coming from ZVC Rom
2. Reboot to Recovery and Perform full backup
3. Wipe Dalvik Cache, System, Data, Cache
4. Install Rom
5. Customize in Aroma
6. Reboot and Enjoy!
7. PLEASE allow rom to settle for 10-15 minutes then restart before doing anything.
To Install if coming from 1.5x(Dirty Flash is possible):
Make a backup
Install using custom recovery
Select which apps you may want removed in Aroma
Select CDMA or GSM configuration
Rom will format the System partition and install updated version but you will not lose any account data or apps you have installed
IORoot can be found here Here
AutoRec can be found here Here
Thank you to @autoprime for IORoot
Thank you to @Cloudyfa for AutoRec
Thank you to @Amarullz for Aroma Installer
If you like my work please considering hitting the Thanks button! or maybe donating some RedBull.
XDA:DevDB Information
2Faced, ROM for the Sprint LG G2
Contributors
Artifesto
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: ZVC Radio
Based On: Stock
Version Information
Status: Stable
Current Stable Version: 1.6/1.7.1x
Stable Release Date: 2014-06-21
Created 2014-06-07
Last Updated 2014-07-06
Reserved
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reserved
*2Faced - 1.0
Initial release
*2Faced 1.1-1.4
Private testing and fixes
Added LG apps back to Rom
*2Faced - 1.5x
Updated to LG G3 Port
Experimental Build
SuperUser added completely(no need to flash SuperSU.zip to achieve root)
*2Faced - 1.6 GSM
Fixed Camera Video Recording Issue
Fixed YouTube not playing videos
Fixed GPS lock issue while navigating
Added Common APN Settings
Build.prop edit to allow easier restore with Flash Tools
Enabled USB PC Connection Pop-up
Installed this rom and its superb... Installation was smooth... Phone running perfectly fine with Indian GSM carrier... No issues yet...
Sent from my LG-D801 using XDA Free mobile app
That's great to know, thanks! I'm happy to hear it works internationally as well
Sent from my LG-LS980 using XDA Free mobile app
ammu2016 said:
Installed this rom and its superb... Installation was smooth... Phone running perfectly fine with Indian GSM carrier... No issues yet...
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
Hi
Does it work with RUIMs ? Can you please test with any CDMA provider like Reliance , TATA , BSNL or MTS . I am interested in RUIM functionality in SIM slot and not interested in NV mode .
I need quick memo... It's not working... Any solution?
Sent from my LG-D801 using XDA Free mobile app
kuduku said:
Hi
Does it work with RUIMs ? Can you please test with any CDMA provider like Reliance , TATA , BSNL or MTS . I am interested in RUIM functionality in SIM slot and not interested in NV mode .
Click to expand...
Click to collapse
I don't have any way of testing with any of those providers but I am working on getting it to work with US CDMA Carriers, I'll do some research into your question and see if it can be put into the ROM. So far I havn't seen much outside of device limitation that cannot be achieved with Android and Custom Roms
ammu2016 said:
I need quick memo... It's not working... Any solution?
Sent from my LG-D801 using XDA Free mobile app
Click to expand...
Click to collapse
I will most likely include a "fatter/bloated" version in my update, I do miss having Quick Memo as well as a few other niceties from a completely stock ROM. But as for now I haven't seen any flashable zip or .apk file to install for individual LG Apps. Depending on work over the next few days I should have an updated version with all of the stock LG Apps. I'm looking into using Aroma and allowing users to pick what they want on install.
kuduku said:
Hi
Does it work with RUIMs ? Can you please test with any CDMA provider like Reliance , TATA , BSNL or MTS . I am interested in RUIM functionality in SIM slot and not interested in NV mode .
Click to expand...
Click to collapse
Removable user identity module/subscriber identy module. Basically a new method to allow a CDMA (code division multiple access) phone use a gsm network. Our phone service is still CDMA, but 4g-lte is a GSM (global system for mobile) style network. So this format combines the two.
Click to expand...
Click to collapse
The RUIM card was designed to replicate many of the advantages of the Subscriber Identity Module (SIM) card on the GSM network. Phones on the CDMA network that do not use RUIM cards store all of the user's information in the phone itself; if the user wants to change phones, he or she has to go to the cell phone service provider, who will transfer the information to the new handset. GSM network phones use SIM cards, which store all of the user's information, so activating a new phone is often as simple as moving the card from one handset to another.
CDMA phones that use RUIM cards share this ability to swap information between phones. The card is the same size and shape as a regular SIM card, and typically includes a version of the SIM software, which means that it can be used in GSM phones. As with switching cards between CDMA phones, however, the GSM handset must be unlocked for a RUIM card to work with it. An RUIM card in a GSM phone might not work in all locations, because different regions use different cell phone frequencies.
Click to expand...
Click to collapse
From what I've read, it really sounds like if you have a ROM which allows both CDMA and GSM communications you're really limited on the frequencies that the phone can use, the LG G2 uses these GSM 850/900/1800/1900 MHz, UMTS 2100* LTE CAT 3, HSPA+ 21 Mbps* EDGE, GPRS Class 10, UMTS, HSPA+, WCDMA, LTE Bands 25/26/41*. All listed frequency support is network/carrier specific. Roaming capability and network frequency support may not be available. If the carrier you wish to use the device with supports any of these then it should work to some extent, at least that's how it appears to me.
Artifesto said:
From what I've read, it really sounds like if you have a ROM which allows both CDMA and GSM communications you're really limited on the frequencies that the phone can use, the LG G2 uses these GSM 850/900/1800/1900 MHz, UMTS 2100* LTE CAT 3, HSPA+ 21 Mbps* EDGE, GPRS Class 10, UMTS, HSPA+, WCDMA, LTE Bands 25/26/41*. All listed frequency support is network/carrier specific. Roaming capability and network frequency support may not be available. If the carrier you wish to use the device with supports any of these then it should work to some extent, at least that's how it appears to me.
Click to expand...
Click to collapse
I have Sprint LS980 only . On ZV7 and ZV8 both RUIM/GSM SIM card work once you change the NV only mode in device . I asked as this functionality was disabled by Sprint in ZVC . The device already has the capability and I dont want to lose it by upgrading to Kitkat . The frequencies in GSM might not work in US in HSPA+ but works fine in other countries which have the Sprint LS980 frequencies for HSPA+ and LTE .
So when the user had commented that he had used it in GSM in India , thats why i requested him to put any RUIM and confirm whether RUIM functionality is disabled or not .
kuduku said:
I have Sprint LS980 only . On ZV7 and ZV8 both RUIM/GSM SIM card work once you change the NV only mode in device . I asked as this functionality was disabled by Sprint in ZVC . The device already has the capability and I dont want to lose it by upgrading to Kitkat . The frequencies in GSM might not work in US in HSPA+ but works fine in other countries which have the Sprint LS980 frequencies for HSPA+ and LTE .
So when the user had commented that he had used it in GSM in India , thats why i requested him to put any RUIM and confirm whether RUIM functionality is disabled or not .
Click to expand...
Click to collapse
This is not a Sprint based ROM, it is T-Mobile GSM based, which is why it allows for GSM carriers to communicate with the device and it not be locked to Sprint CDMA.
Artifesto said:
This is not a Sprint based ROM, it is T-Mobile GSM based, which is why it allows for GSM carriers to communicate with the device and it not be locked to Sprint CDMA.
Click to expand...
Click to collapse
Sorry my mistake , didnt check the thread properly .
Thanks for all the help but my query to @ammu2016 still stands .
Supersu Zip
Does Anyone Have The Supersu Zip ??... I Have Searched And Cant Seem To Find Out. Any Help Would Appreciated.
Thanks In Advance.....
Edit: GOt It... Thanks Everything Is Working Great On Metro Except Data... Any Reason Why??... Any Help Would Appreciated
Thanks.....
dame_diddy22 said:
Does Anyone Have The Supersu Zip ??... I Have Searched And Cant Seem To Find Out. Any Help Would Appreciated.
Thanks In Advance.....
Edit: GOt It... Thanks Everything Is Working Great On Metro Except Data... Any Reason Why??... Any Help Would Appreciated
Thanks.....
Click to expand...
Click to collapse
Maybe try these APN Settings
Name: metropcs
APN: internet
proxy: wap.metropcs.net:3128
port: 3128
username: [email protected]
password: metropcs
server: wap.metropcs.net
mmsc: http://mms.metropcs.net:3128/mmsc
mms proxy: wap.metropcs.net
mms port: 3128
mmc: 310
mnc: 004
auth type: none
apn type: not set
User and Password:
your10-digit#@mymetropcs.com
White lines through screen.
After the phone goes to sleep and is woken up I get white and black lines through the screen. I have to hold the power button down to shut it off then restart the phone. But it seems to do it every time. Has anyone had a similar issue?
crasher381 said:
After the phone goes to sleep and is woken up I get white and black lines through the screen. I have to hold the power button down to shut it off then restart the phone. But it seems to do it every time. Has anyone had a similar issue?
Click to expand...
Click to collapse
Yes, that means you need the modified kernel for your device. Most likely your device has the JDI panel and the kernel is built for the LGD panel.
Have you checked out this nifty tool which should patch your kernel and fix the white lines issue?
http://forum.xda-developers.com/showthread.php?p=52892375
daCLOUD said:
Yes, that means you need the modified kernel for your device. Most likely your device has the JDI panel and the kernel is built for the LGD panel.
Have you checked out this nifty tool which should patch your kernel and fix the white lines issue?
http://forum.xda-developers.com/showthread.php?p=52892375
Click to expand...
Click to collapse
Shortly after posting I can across the jdi kernel and flashed it and all is working now. Thank you very much for the response and help.
I flashed the ROM but it won't boot ahead of LG Logo.
Seems it was a bad flash or bad download...
But, now I can't:
1. Flash TOT file of LS980 as it says incorrect model no
2. Can't boot to recovery thru key combinations.. Its really hit n miss n last time i could boot into recovery thru this combination on some other device was after 10-15 tries.
I can keep trying to boot to recovery n then restore my backup..
Before that, any other solution?
Edit... Was able to boot to recovery n then restore my ZVA backup..
What I actually did was, Flashed the rom on ZVA + flashed ZVC modem.
Was this the reason of not booting the rom? if so, do i need to be on ZVC only ??? No other way to go from ZV7/8/A?
hiteshkkk said:
I flashed the ROM but it won't boot ahead of LG Logo.
Seems it was a bad flash or bad download...
But, now I can't:
1. Flash TOT file of LS980 as it says incorrect model no
2. Can't boot to recovery thru key combinations.. Its really hit n miss n last time i could boot into recovery thru this combination on some other device was after 10-15 tries.
I can keep trying to boot to recovery n then restore my backup..
Before that, any other solution?
Edit... Was able to boot to recovery n then restore my ZVA backup..
What I actually did was, Flashed the rom on ZVA + flashed ZVC modem.
Was this the reason of not booting the rom? if so, do i need to be on ZVC only ??? No other way to go from ZV7/8/A?
Click to expand...
Click to collapse
yes it needs the ZVC Modem/Radio, there is a DLL file that will allow Flash Tools to ignore SW Version and flash it to an LG default. You can then reboot into download and flash anything else with the regular Sprint DLL if you ever get stuck again. I've used it many times, here it is.
Artifesto said:
yes it needs the ZVC Modem/Radio, there is a DLL file that will allow Flash Tools to ignore SW Version and flash it to an LG default. You can then reboot into download and flash anything else with the regular Sprint DLL if you ever get stuck again. I've used it many times, here it is.
Click to expand...
Click to collapse
Got it.. I am already downloading ZVC tot...
But, out of curiosity, I did flash ZVC radio along with your rom, still why didn't it allow?
Thanks for the DLL thing...
HOW TO UNLOCK SPRINT LG G2 LS980
ATTEMPT AT YOUR OWN RISK
I AM NOT RESPONIBLE FOR YOUR DEVICE
IF YOU TRY THIS METHOD!!!!
This is the method i have done
I dont own the downloads nor ls980
1.Revert your ls980 back to stock rom
http://www.lg-phones.org/how-to-flash-unbrick-lg-g-flex-back-to-stock.html/comment-page-1
2. Root your ls980 using towelroot
Towelroot.com
·download supersu in playstore
Open the supersu and grant all access.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Now download ls980 kk baseband and cloudyg3 rom
Kk baseband: https://www.androidfilehost.com/?fid=23329332407584588
Cloudg3 rom: http://forum.xda-developers.com/devdb/project/dl/?id=7992&task=get
Dont extract the cloudyg3 rom!!!?
4. Download autorec.apk
https://www.androidfilehost.com/?fid=23329332407585965
Should be for ls980 version.
5. Run the app
Hit yes and enter recovery
Now your in recovery yay twrp.
6. goto backup and swipe to backup system.
7. Now goto wipe.
Wipe cache and dalvik.
8. Goto install scroll to where you have your cloudyg3 rom and kk baseband
First flash kk baseband
Then flash cloudyg3
9. Reboot
10. Now goto phone and dial
*#*#4636#*#*
Goto phone info
Scroll down and select whats in the image.
Shutdown
10. Put in your sim card a BAM!! Unlocked
I tested t mobile and simple mobile so far.
Just a confirmation
francois11 said:
HOW TO UNLOCK SPRINT LG G2 LS980
ATTEMPT AT YOUR OWN RISK
I AM NOT RESPONIBLE FOR YOUR DEVICE
IF YOU TRY THIS METHOD!!!!
This is the method i have done
I dont own the downloads nor ls980
1.Revert your ls980 back to stock rom
http://www.lg-phones.org/how-to-flash-unbrick-lg-g-flex-back-to-stock.html/comment-page-1
2. Root your ls980 using towelroot
Towelroot.com
·download supersu in playstore
Open the supersu and grant all access.
View attachment 2936106
3. Now download ls980 kk baseband and cloudyg3 rom
Kk baseband: https://www.androidfilehost.com/?fid=23329332407584588
Cloudg3 rom: http://forum.xda-developers.com/devdb/project/dl/?id=7992&task=get
Dont extract the cloudyg3 rom!!!?
4. Download autorec.apk
https://www.androidfilehost.com/?fid=23329332407585965
Should be for ls980 version.
5. Run the app
Hit yes and enter recovery
Now your in recovery yay twrp.
6. goto backup and swipe to backup system.
7. Now goto wipe.
Wipe cache and dalvik.
8. Goto install scroll to where you have your cloudyg3 rom and kk baseband
First flash kk baseband
Then flash cloudyg3
9. Reboot
10. Now goto phone and dial
*#*#4636#*#*
Goto phone info
Scroll down and select whats in the image.
View attachment 2936110
Shutdown
10. Put in your sim card a BAM!! Unlocked
I tested t mobile and simple mobile so far.
Click to expand...
Click to collapse
New to this website(not flashing), I just wanted to make sure I was on track, ive had this sprint g2 for a few days now and while trying to flash a couple of 4.4.4 roms I got stuck on boot screen as well as a bootloop but managed to always get it back. Recently, I flashed the Cloudy G3 2.0 rom and so far is the only one I got to load. Im fine with using stock android but my main concern is getting a service to work(have yet to get another sim so cant test right now, would rather KNOW it would work once I buy it). I see you recommend using Cloudy G3 and I wanted to know which version was best, right now I just have the 2.0 rom installed with no data with instead of saying Sprint it doesn't detect the sim and says roaming indicator off. I would like to just be able to use T-Mobile or straight talk for talk,txt, and web(not much web, Comcast business class wifi ). Am I at least half-way there b/c every post I read about unlocking is helpful and all but requires stock rom or flashing another and I just wanted to stick with cloudy and get it up and running, just didn't know if I was on the right track, any advice?
I have two questions:
1) It unlocks CDMA, GSM or both?
2) Does it work with carriers outside US?
Thanks in advance.
fr0zenfireV said:
I have two questions:
1) It unlocks CDMA, GSM or both?
2) Does it work with carriers outside US?
Thanks in advance.
Click to expand...
Click to collapse
1) CloudyFa says its for GSM.
2) Yes, it does work very well with carriers outside US. Myself used it at various countries outside US.
Thanks.
I'm confused...... either this doesn't work or no one here on the Sprint variant cares to sim unlock their device, or is this a repost in which someone else posted how to unlock and I just must have missed it? I only ask because no comments, thank you's...which I understand that part since most people on xda are unfortunately ungrateful in terms of having enough respect to thank the individual who helped them, or took time out of their lives to make something and share it.... but no confirmations that it does indeed work..... guess I'll just have to go ahead and try it out then.
so does this work? i have a sprint g2 that i just got. I have to fix the busted screen then i want to unlock it for tmobile. thanks!
I'll let you know in about 15 mins. What your screen is cracked? I thought my phone was broken because the screen was all black and would not turn on and I read every thread and no one seemed to know how to fix. Only solution I found was to send it in. But then I just took phone apart and unplugged the battery a day boom it turned on
pitbullmommy45245 said:
so does this work? i have a sprint g2 that i just got. I have to fix the busted screen then i want to unlock it for tmobile. thanks!
Click to expand...
Click to collapse
I did this a while back on my Sprint G2, it works on T-Mobile. I switched to T-Mobile on the 15th. Only GSM though, which is still 2x faster than Sprint's 3G at least for me.
So go ahead and enjoy!
This is a repost, there is already an unlock thread. Same info is on CloudyROM FAQ as well.
abhinav.tella said:
I did this a while back on my Sprint G2, it works on T-Mobile. I switched to T-Mobile on the 15th. Only GSM though, which is still 2x faster than Sprint's 3G at least for me.
So go ahead and enjoy!
This is a repost, there is already an unlock thread. Same info is on CloudyROM FAQ as well.
Click to expand...
Click to collapse
i called sprint and i got the msl code (unlock code) so i don't think i'll have to do this lol thanks though!
Sprint only unlocks for international not local. Mine was unlocked but still did not work so I used CloudyG3.
SICKMADE said:
I'll let you know in about 15 mins. What your screen is cracked? I thought my phone was broken because the screen was all black and would not turn on and I read every thread and no one seemed to know how to fix. Only solution I found was to send it in. But then I just took phone apart and unplugged the battery a day boom it turned on
Click to expand...
Click to collapse
OK so I used this method to unlock the sprint LG g2 and while going into the dialer settings and changing the settings while I didn't use the settings that op suggested I switched to I believe gsm preferred and then went into the apn settings where the dev of Cloudy rom has edited in a bunch of different apns and t-mobile did work it just wasn't at speeds that we are used to this day and age in my opinion.. really not worth it to me. Tried using Verizon and while the apns popped up for it I couldn't seem to get it working. May just be the settings I was trying. But All In All The Method Does Work Just The Speed Is A factor
SICKMADE said:
OK so I used this method to unlock the sprint LG g2 and while going into the dialer settings and changing the settings while I didn't use the settings that op suggested I switched to I believe gsm preferred and then went into the apn settings where the dev of Cloudy rom has edited in a bunch of different apns and t-mobile did work it just wasn't at speeds that we are used to this day and age in my opinion.. really not worth it to me. Tried using Verizon and while the apns popped up for it I couldn't seem to get it working. May just be the settings I was trying. But All In All The Method Does Work Just The Speed Is A factor
Click to expand...
Click to collapse
I am getting pretty fast speeds on GSM (250-350kbps) for the G2, maybe network in your area is not that good?
abhinav.tella said:
I am getting pretty fast speeds on GSM (250-350kbps) for the G2, maybe network in your area is not that good?
Click to expand...
Click to collapse
What needs to be done just to use this phone abroad with foreign SIM card? I have MSL already.
OM
ObviousMan said:
What needs to be done just to use this phone abroad with foreign SIM card? I have MSL already.
OM
Click to expand...
Click to collapse
If you are a Sprint customer they will unlock for international for free, just call customer serivice.
abhinav.tella said:
If you are a Sprint customer they will unlock for international for free, just call customer serivice.
Click to expand...
Click to collapse
Device has bad ESN for Sprint, only want to use it on 3G GSM abroad.
OM
ObviousMan said:
Device has bad ESN for Sprint, only want to use it on 3G GSM abroad.
OM
Click to expand...
Click to collapse
Flash CloudyG3 and follow Sprint instructions in the FAQ for that ROM, then you should be able to use it unlocked.
abhinav.tella said:
Flash CloudyG3 and follow Sprint instructions in the FAQ for that ROM, then you should be able to use it unlocked.
Click to expand...
Click to collapse
I was not planning to flash custom ROM, I want to keep it on stock. Is it possible to unlock on stock?
OM
ObviousMan said:
I was not planning to flash custom ROM, I want to keep it on stock. Is it possible to unlock on stock?
OM
Click to expand...
Click to collapse
Yes, but I believe it actually requires more work, check out the unlock thread. It has a detailed explanation of how to do it. I prefer CloudyG3 as it does not have Sprint junk installed.
abhinav.tella said:
Yes, but I believe it actually requires more work, check out the unlock thread. It has a detailed explanation of how to do it. I prefer CloudyG3 as it does not have Sprint junk installed.
Click to expand...
Click to collapse
I found it earlier as well, thanks. I do not like bloatware either, but I need "stock stable" operations of my phone. I was planning to root it, so the thread gives me what I need. Not sure why it did not register for me before, too much info. I saved a link to it a week ago.
OM
Regarding the "stock stable" comment above: CloudyG3 on the G2 has been rock solid stable, and much smoother performance than the stock ROMs that I tested when I first got my G2 several days ago (ZVC was on it, it updated to ZVD, I never bothered with the ZVE update, but I did roll it back to ZV8 for some testing before I committed to installing CloudyG3).
The G3 UI is awesome, far better IMO than the G2 UI, and performance has been amazing. I installed the Dorimanx kernel and tweaked the Extreme_Battery profile a bit using STweaks and so far it's been nothing but pure awesome and I'm very happy with it.
Haven't had one issue since I did this about 3 days ago, and in fact the battery life has been steadily improving as the ROM "settles in" which is expected in some situations when that's done. I had over 7.5 hours of screen-on time yesterday and that was with only 88% on the battery when I unplugged it. I looped "Captain America: The Winter Soldier" 3x in a row with screen on the whole time (obviously) and sound muted; that movie is 2 hours and 15 mins long start to finish (including the credits because it has not one, not two, but THREE scenes during the credits).
I'm VERY happy with this CloudyG3 ROM on this G2 of mine, and as noted above and in many other posts, if you install CloudyG3 2.0 on the Sprint G2 the only thing you'll have to do afterward is put in a GSM SIM card and that's about it for it to work. All the "unlocking" stuff has been done with this ROM ahead of time - it's possible to stay pure absolute Sprint stock on this but getting that SIM unlock functional can be quite problematic, the instructions are "simple" but they still don't always work out. I made several attempts to do it with my Sprint G2 when I got it and finally gave up after reading all the positive reviews of CloudyG3.
If you want pure stock Sprint ROM action, you're going to have to work to get that SIM unlocked and it's not going to be easy - there's no "click this, click that, you're done" type solution, unfortunately.
Unless of course you take the "click this, click that, you just installed CloudyG3 on your G2, you're done..." route.
Since T-Mobile version SM-N976U came out today with Android 10 N976USQU1ASL3 would it make sense to try to flash the Verizon SM-N976V with it?
toshik1 said:
Since T-Mobile version SM-N976U came out today with Android 10 N976USQU1ASL3 would it make sense to try to flash the Verizon SM-N976V with it?
Click to expand...
Click to collapse
I have a N976V too, if that can work, please tell me :laugh:
toshik1 said:
Since T-Mobile version SM-N976U came out today with Android 10 N976USQU1ASL3 would it make sense to try to flash the Verizon SM-N976V with it?
Click to expand...
Click to collapse
same thing ive been trying to figure out.
I doubt it would work. They are not the same hardware. The T-Mobile has the x55 modem and the Verizon uses the x50 modem. They are different phones.
ourtech said:
The T-Mobile has the x55 modem and the Verizon uses the x50 modem.
Click to expand...
Click to collapse
And this is the only difference so far.
So if I try and flash my verizon n976v to tmobiles 976u, it won't work ? Has anyone successfully tried it and verified it works ?
It should work as long as you are within the same bin version - VZW for example on bin 2 recently. Everything should work modem is the only one at question. In theory driver for newer x55 modem should support x50, but who knows? The only gain right now is official Android 10, but VZW should get its own in a few weeks anyway.
I would also keep VZW ROM to flash it back.
No, this will not work.
Only U and U1 models are cross compatible, for flashing. You cannot flash U or U1 firmware to a model that ends in any other letter - and vice versa.
Good point! Thanks!
toshik1 said:
Since T-Mobile version SM-N976U came out today with Android 10 N976USQU1ASL3 would it make sense to try to flash the Verizon SM-N976V with it?
Click to expand...
Click to collapse
Anyone know why official firmware for Verizon Note 10+ 5G (SM-N976V) cannot be found on sammobile.com? I've yet to be able to locate it via their firmware database. They don't even list the SM-N976V model in my experience.
blbarrs said:
Anyone know why official firmware for Verizon Note 10+ 5G (SM-N976V) cannot be found on sammobile.com? I've yet to be able to locate it via their firmware database. They don't even list the SM-N976V model in my experience.
Click to expand...
Click to collapse
They don't have every single model. They don't have firmware for the G928V either, for example. And I'm sure I could find others, if I looked.
Thankfully, you can always grab the latest/newest version straight from SamFirm or Frija, any time that you want
If N976V/975U is written on the board, then it can be flashed with any firmware ? If not, why such a designation?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alexx12 said:
If N976V/975U is written on the board, then it can be flashed with any firmware ? If not, why such a designation?
Click to expand...
Click to collapse
Doesn't matter what the board says. It matters which bootloader is flashed to it
iBowToAndroid said:
Doesn't matter what the board says. It matters which bootloader is flashed to it
Click to expand...
Click to collapse
According to imei the bootloader flashed for N975U. But it impossible to flash another bootloader for 976V ?
Alexx12 said:
According to imei the bootloader flashed for N975U. But it impossible to flash another bootloader for 976V ?
Click to expand...
Click to collapse
IMEI doesn't matter either. The only thing that matters is what model it shows as, in the Settings. But no matter which one it is, you can't flash another model's firmware to it
iBowToAndroid said:
IMEI doesn't matter either. The only thing that matters is what model it shows as, in the Settings. But no matter which one it is, you can't flash another model's firmware to it
Click to expand...
Click to collapse
OK. It shows N975U in the settings. Anyway , it seems strange that different models are written on the board. And also there is a 5G modem on the board.
Alexx12 said:
OK. It shows N975U in the settings. Anyway , it seems strange that different models are written on the board. And also there is a 5G modem on the board.
Click to expand...
Click to collapse
Well if you look up a teardown article or video, I'm sure that will be noted in there
iBowToAndroid said:
Well if you look up a teardown article or video, I'm sure that will be noted in there
Click to expand...
Click to collapse
Thanks. I'm afraid to even try to change an EEPROM. I'll leave it as it is , N975U
I know this is an older post however, I have a n976u I purchased carrier unlocked. I used https://t.me/Afaneh92UnlockChannell to unlock the bootloader and then went to town flashing everything I could find on to it. I have (or had) some photos showing different builds I had on that phone.
I am by no means putting down, discreditting or mean disrespect toward any developer, any builder, a manufacturer or website BUT some builds they say "wont work" and "not interchangeable" because of modems or chips or whatevers - however, my first 3 months I had n975u stock on my n976u. Took these pictures as an after thought so just service provider shows different from build, but you get the idea I hope.
I suppose bricking a $1k phone is not in most peoples to-do list and for sure I don't want that however, I am full aware the risk I take flashing my devices. I hope you are also aware of the risk. I flashed 100 different files from a patched odin to my Galaxy Note10+ 5g, and I dont care if the file was for SnapDragon or Exynos. Some files work for both and some dont. At 1 point I had 2 of every icon on the status bar... 2 battery icons, 2 time with seconds, 2 bandwidth icons and of course overlapping each other but the device still worked.
-- not a Samsung device but I have a Oneplus 7t Pro 5g McLaren TMobile device also and OrangeFox recovery is NOT for the Mclaren "they said" however, I flashed it and used it for a few months with no issues. I flashed a "do not flash-only boot" TWRP build as well for non-5g OnePlus 7t Pro device to my 5g McLaren and worked fine. Ive been using crDroid for a couple months now and bout to flash my Samsung with a newer build for n976u from https://t.me/userdata_aio_10_series
squirlnutz said:
I know this is an older post however, I have a n976u I purchased carrier unlocked. I used https://t.me/Afaneh92UnlockChannell to unlock the bootloader and then went to town flashing everything I could find on to it. I have (or had) some photos showing different builds I had on that phone.
I am by no means putting down, discreditting or mean disrespect toward any developer, any builder, a manufacturer or website BUT some builds they say "wont work" and "not interchangeable" because of modems or chips or whatevers - however, my first 3 months I had n975u stock on my n976u. Took these pictures as an after thought so just service provider shows different from build, but you get the idea I hope.
I suppose bricking a $1k phone is not in most peoples to-do list and for sure I don't want that however, I am full aware the risk I take flashing my devices. I hope you are also aware of the risk. I flashed 100 different files from a patched odin to my Galaxy Note10+ 5g, and I dont care if the file was for SnapDragon or Exynos. Some files work for both and some dont. At 1 point I had 2 of every icon on the status bar... 2 battery icons, 2 time with seconds, 2 bandwidth icons and of course overlapping each other but the device still worked.
-- not a Samsung device but I have a Oneplus 7t Pro 5g McLaren TMobile device also and OrangeFox recovery is NOT for the Mclaren "they said" however, I flashed it and used it for a few months with no issues. I flashed a "do not flash-only boot" TWRP build as well for non-5g OnePlus 7t Pro device to my 5g McLaren and worked fine. Ive been using crDroid for a couple months now and bout to flash my Samsung with a newer build for n976u from https://t.me/userdata_aio_10_series
Click to expand...
Click to collapse
I really don't understand the point of this post
Frist off I'm not Responsible for anything that happens to your phone!!!
THIS HAS BEEN TESTED AND WORKING 100% ON TMO 9PRO LE2127!!ALSO MODEM RETENTION.
(THIS IT NOT FOR THE UNLOCKED 9PRO LE2125)
DO THIS AT YOU OWN RISK!!
THIS METHOD IS 100% WORK FOR TMO 9PRO USER!!!
I HAVE NOT GOT A CHANCE TO GET IT STABLE ON OOS A11 YET!!
MUST HAVE REQUIREMENTS!!
Dual Sim
(Tray Amazon where I got mine)
2 ACTIVE SIM CARDS
YOUR PHONE MUST BE SIM UNLOCKED!!
BACKUP YOUR EFS(IMEI)FOR SAFE MEASURE!
UNLOCK TOKEN IS ALWAYS HANDY! NOT REQUIRED THO!
MUST BE ON OOS 11.2.8.8. NA OR EU 11.2.8.8 TO START THE PROCESS
PLEASE FOLLOW THIS TO THE T!!AS THIS METHOD IS TESTED AND WORKING 100% FOR TMO 9PRO!! ONLY!!!
UNLOCK BOOTLOADER ON OOS 11
NOW UPDATE TO YOU FLAVOR OF A12 DP2 OR OB1
ROOT AND BACK YOU INFO IMEI AND SUCH WITH ONLY ONE SIM IN THE DEVICE
USE THIS APP PARTITIONS BACKUP IN PLAYSTORE
I HAVE ATTACHED A ONE-CLICK ROOT FOLDER FOR OB1
BELOW
ENABLE USB DEBUGGING RUN SCRIPT
IT WILL REBOOT WHEN DONE
ONCE DONE PUT IT SOMEWHERE SAFE!!
TAKE SIM TRAY OUT OF THE DEVICE
MSM TOOL BACK TO OOS 11.2.8.8 NA OR EU
PLACE THIS (A12 D1 VARIANT) ON TO YOU DEVICE
NOW LOCAL UPGRADE DURING THIS PROCESS LEAVE SIM TRY OUT
ONCE IT STATES REBOOT CLICK IT AT THIS POINT INSERT SIM TRY
ONCE DEVICE REBOOT YOU NOW WILL SEE DUAL SIM IS ENABLED
NOW TO MAKE IT STICK PERMANENTLY!
IN THE FILE LINK I PROVIDE GRAB THE OXYGEN UPDATER APK
INSTALL SELECT YOUR FLAVOR OF A12 OB1 OR DP2 WHICH EVER ONE THAT YOU BACKED UP YOU INFO ON
DOWNLOAD AND LOCAL UPDATE
YOU MIGHT START TO BOOTLOOP ON REBOOT IF SO
HOLD POWER AND VOLUME DOWN ENTER RECOVERY AND WIPE DATA
REBOOT
NOW ON REBOOT YOU SHOULD SEE DUAL SIM WORKING
IN THE REAR INSTANCE THAT YOU REBOOT AND ITS NOT WORK
PLEASE CHECK IF IT READ IMEI BY TYPING *#06# OR IN THE ABOUT SECTION IN SETTINGS
IF IT STATS NULL
IF SO TRY STEPS BELOW
PLEASE REMOVE SIM TRAY AND CONNECT TO WIFI AND REINSTALL SIM TRAY AND CHECK
YOUR IMEI IS STILL THERE 100%
ITS A OB1/DP2 GLITCH WITH ARE DEVICE MODEL!
WAIT A COUPLE MINUTE AND REBOOT
FLASH TMO TO EU MSM TOOL
YOU IMEI AND SIGNAL WILL BE WORK FINE
(ALSO DO THIS IF YOU WANT TO RELOCK YOUR BOOTLOADER )
THE LOCAL UPDATE BACK TO A12 AN IT SHOULD BE ACTIVE
NOW ITS PERMANENT ON A12
YOU CAN DOWNGRADE BACK TO OOS 11 BUT IT WILL NOT SHOW!!
IM WORKING ON THAT!!
If You Would like to Donate
For the work I have done
I say thank you
SPECIAL THANKS TO MY TESTER
crackerjack9249 LE2127Libra420T LE2127LE2125 WILL NOT SUPPORT!!
@FizzyAps is the dude. Thanks again sir.
crackerjack9249 said:
View attachment 5430919
@FizzyAps is the dude. Thanks again sir.
Click to expand...
Click to collapse
This guy lol you better kick that 5g on sir
Hello sir. Great effort. Please have someone review your work. Let's use a beautiful default font that we can all read. One color would be nice. Thank you so much.
FizzyAps said:
This guy lol you better kick that 5g on sir
Click to expand...
Click to collapse
I don't get 5G in the basement
benhidalgo said:
Hello sir. Great effort. Please have someone review your work. Let's use a beautiful default font that we can all read. One color would be nice. Thank you so much.
Click to expand...
Click to collapse
Sorry I don't understand
One of my tester
Was the first to comment?
benhidalgo said:
Hello sir. Great effort. Please have someone review your work. Let's use a beautiful default font that we can all read. One color would be nice. Thank you so much.
Click to expand...
Click to collapse
red on black shouldn't be an issue
I'm literally a few blocks away from 5G -_-
FizzyAps said:
NOW ITS PERMANENT ON A12
YOU CAN DOWNGRADE BACK TO OOS 11 BUT IT WILL NOT SHOW!!
IM WORKING ON THAT!!
So if you downgrade to OOS 11, it will not show, but would it still be working? Thank you for sharing this!
Click to expand...
Click to collapse
it will be set back to default 1
but don't worry about that is still unlocked/unblocked
when you go back to A12 it'll will show
im am working on oos 11 fix
Wow i have a le2125 and i am tempted to try. Just out of curiosity, what files or partitions are you changing to achive this dual sim mod? I was always curious about how they locked it on 9 pro
elmarian756 said:
Wow i have a le2125 and i am tempted to try. Just out of curiosity, what files or partitions are you changing to achive this dual sim mod? I was always curious about how they locked it on 9 pro
Click to expand...
Click to collapse
Well for one I wouldn't call this a mod
as this doesn't get removed even after msm tool flashing stock Especially for TMO LE2127 witch normally kills mdm retention that this technically "MODIFYS" as you would say mod for the TMO le2127
for the TMO 9pro the effect is different then to the NA le2125
as I only had one test for that device that really didn't give much feed back other then it worked for them and screen shots
as where had 2 great tester on TMO plus my self to test the many why to get this to work!!
also as I have not got it stick on oos A11
I consider this is still under testing and will not release anything more then what I have
Due I'm not going to have ppl killing there phone or turning them in to paper weight like I did
also I only released this due to other's bugging and blowing up here and telegram nonstop
Once I should that I got it working
I did manage to get my US unlocked 9 pro to show two SIM slots with separate IMEIs after following the steps through flashing the "A12DUALSIM" zip. Only one SIM card was active and I did not have the ability to toggle the second one on or off. Waiting to download the latest open beta again to try and get it to "stick" as OP said.
Edit, I forgot to mention that I removed the SIMs to try and swap their positions and the phone stopped recognizing either of them.
Edit 2. My phone is a 2125 which is not what the os is reporting.
Do you have daul tray
cabledaliens said:
I did manage to get my US unlocked 9 pro to show two SIM slots with separate IMEIs after following the steps through flashing the "A12DUALSIM" zip. Only one SIM card was active and I did not have the ability to toggle the second one on or off. Waiting to download the latest open beta again to try and get it to "stick" as OP said.
Click to expand...
Click to collapse
You have daul sim tray
FizzyAps said:
You have daul sim tray
Click to expand...
Click to collapse
Yes. Also it reported my phone as a 2120 but it is a 2125. Now back in a boot loop. Guess I need to msm back to oos 11 and start over.
cabledaliens said:
Yes. Also it reported my phone as a 2120 but it is a 2125. Now back in a boot loop. Guess I need to msm back to oos 11 and start over.
Click to expand...
Click to collapse
Yes that's normal
Boot loop on ota? To ob1 or Dp2
FizzyAps said:
Well for one I wouldn't call this a mod
as this doesn't get removed even after msm tool flashing stock Especially for TMO LE2127 witch normally kills mdm retention that this technically "MODIFYS" as you would say mod for the TMO le2127
for the TMO 9pro the effect is different then to the NA le2125
as I only had one test for that device that really didn't give much feed back other then it worked for them and screen shots
as where had 2 great tester on TMO plus my self to test the many why to get this to work!!
also as I have not got it stick on oos A11
I consider this is still under testing and will not release anything more then what I have
Due I'm not going to have ppl killing there phone or turning them in to paper weight like I did
also I only released this due to other's bugging and blowing up here and telegram nonstop
Once I should that I got it working
Click to expand...
Click to collapse
Yeah i honestly not trying this for now because my le2125 is my only work device.
If the files or partitions being experimented on your work are some sort of a secret i couldn't care less lol just saw an interesting topic and came by.
i honestly think it is a matter of time until oneplus silently enables second sim as they did on older devices.
I'm just an old software dev with a 9 pro interested on what OP did to block 2 sim (which files or props). So there layed my question.
IMHO any user that tries this and bricks their device is entitled to their own responsibility as you are if you don't release until stable.
Hope you get it working!
elmarian756 said:
Yeah i honestly not trying this for now because my le2125 is my only work device.
If the files or partitions being experimented on your work are some sort of a secret i couldn't care less lol just saw an interesting topic and came by.
i honestly think it is a matter of time until oneplus silently enables second sim as they did on older devices.
I'm just an old software dev with a 9 pro interested on what OP did to block 2 sim (which files or props). So there layed my question.
IMHO any user that tries this and bricks their device is entitled to their own responsibility as you are if you don't release until stable.
Hope you get it working!
Click to expand...
Click to collapse
understand but messing with props does nothing people have tried
Hey Everyone,
I currently switched my phone from VZW SM-F926U to SM-F926U1, but I noticed my service provider says vzw/vzw/vzw and I'm trying to get it to TMB/TMB/TMB previously on my older phones I would flash csc file to change it but I cant and don't want to wipe my phone so I want to use Home_csc but searching on the internet some users say it wont change the CSC and other post say it will
If I understand the frequency band system these days, you don't need to flash a carrier's firmware of software to use it on another network. The phones are able to jump from one carrier to another if it's an unlocked model or if its a carrier model (you appear to have one for Verizon) that is unlocked by the carrier.
The SIM card tells it what network. If it's from a carrier store, you'll need to get the phone unlocked by them to use it anywhere.
It's does matter what carrier you using on every phone it's doesn't matter what sim card you have if the rom is verzion your not gonna get all the service I know that bc I have t mobile and my US unlocked version fold 3 I flashed the verzion rom just to try it out and when I am at home or whatever I have 2 bars on the verzion rom why is bc verzion doesn't unlocked all the bands required to hook up to t mobile towers so I flashed t mobile rom issued fixed now I have full signal and don't have issues roaming when I know t mobile service is very good so it's does matter what phone and rom used so they should flash to t mobile rom on there verzion z fold 3 bc its will enable 5g uc bc on verzion rom you won't be able to connect to 5g uc at all so your not correct you don't know anything about how the roms work and phones work
badazzbubbanc said:
It's does matter what carrier you using on every phone it's doesn't matter what sim card you have if the rom is verzion your not gonna get all the service I know that bc I have t mobile and my US unlocked version fold 3 I flashed the verzion rom just to try it out and when I am at home or whatever I have 2 bars on the verzion rom why is bc verzion doesn't unlocked all the bands required to hook up to t mobile towers so I flashed t mobile rom issued fixed now I have full signal and don't have issues roaming when I know t mobile service is very good so it's does matter what phone and rom used so they should flash to t mobile rom on there verzion z fold 3 bc its will enable 5g uc bc on verzion rom you won't be able to connect to 5g uc at all so your not correct you don't know anything about how the roms work and phones work
Click to expand...
Click to collapse
badazzbubbanc said:
It's does matter what carrier you using on every phone it's doesn't matter what sim card you have if the rom is verzion your not gonna get all the service I know that bc I have t mobile and my US unlocked version fold 3 I flashed the verzion rom just to try it out and when I am at home or whatever I have 2 bars on the verzion rom why is bc verzion doesn't unlocked all the bands required to hook up to t mobile towers so I flashed t mobile rom issued fixed now I have full signal and don't have issues roaming when I know t mobile service is very good so it's does matter what phone and rom used so they should flash to t mobile rom on there verzion z fold 3 bc its will enable 5g uc bc on verzion rom you won't be able to connect to 5g uc at all so your not correct you don't know anything about how the roms work and phones work
Click to expand...
Click to collapse
badazzbubbanc said:
It's does matter what carrier you using on every phone it's doesn't matter what sim card you have if the rom is verzion your not gonna get all the service I know that bc I have t mobile and my US unlocked version fold 3 I flashed the verzion rom just to try it out and when I am at home or whatever I have 2 bars on the verzion rom why is bc verzion doesn't unlocked all the bands required to hook up to t mobile towers so I flashed t mobile rom issued fixed now I have full signal and don't have issues roaming when I know t mobile service is very good so it's does matter what phone and rom used so they should flash to t mobile rom on there verzion z fold 3 bc its will enable 5g uc bc on verzion rom you won't be able to connect to 5g uc at all so your not correct you don't know anything about how the roms work and phones work
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
badazzbubbanc said:
It's does matter what carrier you using on every phone it's doesn't matter what sim card you have if the rom is verzion your not gonna get all the service I know that bc I have t mobile and my US unlocked version fold 3 I flashed the verzion rom just to try it out and when I am at home or whatever I have 2 bars on the verzion rom why is bc verzion doesn't unlocked all the bands required to hook up to t mobile towers so I flashed t mobile rom issued fixed now I have full signal and don't have issues roaming when I know t mobile service is very good so it's does matter what phone and rom used so they should flash to t mobile rom on there verzion z fold 3 bc its will enable 5g uc bc on verzion rom you won't be able to connect to 5g uc at all so your not correct you don't know anything about how the roms work and phones work
Click to expand...
Click to collapse
THORMUNZ said:
Hey Everyone,
I currently switched my phone from VZW SM-F926U to SM-F926U1, but I noticed my service provider says vzw/vzw/vzw and I'm trying to get it to TMB/TMB/TMB previously on my older phones I would flash csc file to change it but I cant and don't want to wipe my phone so I want to use Home_csc but searching on the internet some users say it wont change the CSC and other post say it will
Click to expand...
Click to collapse
badazzbubbanc said:
It's does matter what carrier you using on every phone it's doesn't matter what sim card you have if the rom is verzion your not gonna get all the service I know that bc I have t mobile and my US unlocked version fold 3 I flashed the verzion rom just to try it out and when I am at home or whatever I have 2 bars on the verzion rom why is bc verzion doesn't unlocked all the bands required to hook up to t mobile towers so I flashed t mobile rom issued fixed now I have full signal and don't have issues roaming when I know t mobile service is very good so it's does matter what phone and rom used so they should flash to t mobile rom on there verzion z fold 3 bc its will enable 5g uc bc on verzion rom you won't be able to connect to 5g uc at all so your not correct you don't know anything about how the roms work and phones work
Click to expand...
Click to collapse
Just flash use smartswitch to back up all you data on the pc
badazzbubbanc said:
It's does matter what carrier you using on every phone it's doesn't matter what sim card you have if the rom is verzion your not gonna get all the service I know that bc I have t mobile and my US unlocked version fold 3 I flashed the verzion rom just to try it out and when I am at home or whatever I have 2 bars on the verzion rom why is bc verzion doesn't unlocked all the bands required to hook up to t mobile towers so I flashed t mobile rom issued fixed now I have full signal and don't have issues roaming when I know t mobile service is very good so it's does matter what phone and rom used so they should flash to t mobile rom on there verzion z fold 3 bc its will enable 5g uc bc on verzion rom you won't be able to connect to 5g uc at all so your not correct you don't know anything about how the roms work and phones work
Click to expand...
Click to collapse
Just download smartswitch on your pc or laptop it's back up everything your log ins and all that and then download t mobile rom and flash it with odin
badazzbubbanc said:
It's does matter what carrier you using on every phone it's doesn't matter what sim card you have if the rom is verzion your not gonna get all the service I know that bc I have t mobile and my US unlocked version fold 3 I flashed the verzion rom just to try it out and when I am at home or whatever I have 2 bars on the verzion rom why is bc verzion doesn't unlocked all the bands required to hook up to t mobile towers so I flashed t mobile rom issued fixed now I have full signal and don't have issues roaming when I know t mobile service is very good so it's does matter what phone and rom used so they should flash to t mobile rom on there verzion z fold 3 bc its will enable 5g uc bc on verzion rom you won't be able to connect to 5g uc at all so your not correct you don't know anything about how the roms work and phones work
Click to expand...
Click to collapse
Yep I recently learned that few days ago, I'm missing out on true 5G and I'm actually on 4G right now, but sadly I'm on a Verizon specific phone and I tried to flash T-Mobile and it didn't work at all and the only way for me to change the CSC would be with root, but there's no root for the U variant, little information on the internet, and no one has been successful to change the csc without root. The only thing I can do is wait for root or try to aquire an actual stock factory unlocked phone.
From reading, it seems like perhaps theres an E-Sim on the phone and that probably triggers the phone to switch back to verzion on boot after a carrier change flash. Other than that I'm stuck on this Verizon firmware until something is uncovered, but I plan on contacting Samsung or T-Mobile and see if they're willing to swap phones for me.