Develop Bugs

STOCK EU 2.3.5 Request

Hi, I accidentally deleted my stock rom image from cwm recovery and I'd like to go back to stock as I'm currently on CM 7.2. So I was wondering if someone could make image of it via cwm and upload it somewhere for me. Or is there any other way to go back? ( I couldn't find any )
Many thanks.

Just use the search function for the Latest Ruu in this section of the forum, flash it and you will revert to stock, read the thread in the link below, good luck
http://forum.xda-developers.com/showthread.php?t=1431969
Sent via Tapatalk

Aef 101 said:
Just use the search function for the Latest Ruu in this section of the forum, flash it and you will revert to stock, read the thread in the link below, good luck
http://forum.xda-developers.com/showthread.php?t=1431969
Sent via Tapatalk
Click to expand...
Click to collapse
No luck with that,and I've tried few different Ruu's,every time I get error 155. Got any other idea?

Hi,
No need to worry, try this way:
(1) Download the PG76IMG.ZIP (Stock ROM) available from this thread. Extract the "system.img" file next.
(2) Make sure, your WFS can connect to your computer. If so, go to your phone's bootloader next, and choose "FASTBOOT". Then push the system.img image file to your phone as follows:
fastboot flash system system.img
Click to expand...
Click to collapse
Voilá. Now shutdown your phone and turn it on again. You WFS2 should boot into the Stock ROM. Please let us know if this worked for you. Thank you
Kind regards, meshua

Nope,still no luck. It installed Stock rom and recovery,but my phone is now stuck on quietly brilliant logo and it bootloops on it.

meshua09 said:
Hi,
No need to worry, try this way:
(1) Download the PG76IMG.ZIP (Stock ROM) available from this thread. Extract the "system.img" file next.
(2) Make sure, your WFS can connect to your computer. If so, go to your phone's bootloader next, and choose "FASTBOOT". Then push the system.img image file to your phone as follows:
Voilá. Now shutdown your phone and turn it on again. You WFS2 should boot into the Stock ROM. Please let us know if this worked for you. Thank you
Kind regards, meshua
Click to expand...
Click to collapse
shouldn't he flash the boot also?
fastboot flash boot boot.img
Click to expand...
Click to collapse
and after that
fastboot flash system system.img
Click to expand...
Click to collapse
That worked for me.
If it still fails to startup
Reinstall cwm again:
download this: CWM_Recovery_5.0.2.6.zip
Flash the recovery.img(inside the just downloaded zip) using this command(ofc make sure to be in your phone's bootloader and that fastboot is selected):
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Now start up recovery and do:
- wipe data/factory reset
- wipe cache partition
- advanced --> - wipe dalvik cache
now go back to your bootloader and use fastboot to flash boot.img and system.img
fastboot flash boot boot.img
fastboot flash system system.img
Click to expand...
Click to collapse
There is no need to flash the stock recovery.img
Now your phone should boot normally.

Hi,
flashing the boot.img is what I consider as the next/last options. The boot.img contains the kernel and the initial file system which right now seems not being compatible with the stock HTC ROM you flashed the last time. Just follow nis-gens' advice and flash the corresponding boot.img too (as directed)...
Hungry to hear whether or not that put your phone back on track...
Cheers, meshua

After flashing boot.img it worked, thank you both!

meshua09 said:
Hi,
No need to worry, try this way:
(1) Download the PG76IMG.ZIP (Stock ROM) available from this thread. Extract the "system.img" file next.
(2) Make sure, your WFS can connect to your computer. If so, go to your phone's bootloader next, and choose "FASTBOOT". Then push the system.img image file to your phone as follows:
Voilá. Now shutdown your phone and turn it on again. You WFS2 should boot into the Stock ROM. Please let us know if this worked for you. Thank you
Kind regards, meshua
Click to expand...
Click to collapse
where do i type flashboot flash system system.img
??????
i am kind of confused.......

Hi kill3rlook5,
To use "fastboot", you need
the Android Debug Bridge (ADB) installed on your computer. It's part of the Android SDK which you can download here: developer.android.com/sdk/index.html. Choose your platform first, then download and install this kit.
a proper USB Driver that makes your phone talk with your computer by using adb or fastboot commands. If you can't find a driver which fits your phone, please search this forum, or use google to get a version that does.
Once both are installed, open a console on your computer (Windows: run >> cmd.exe), go to the folder that contains the fastboot.exe file, and run the command from within this console window. I hope that will distract you from your current confusion?
Cheers, meshua.

Would nis-gens method be putting it back entirely to stock, as it was before flashing any custom ROMs? I had Alquez's CM7 port, but decided to come back to the 2.3.5 stock build for some issues I need to clarify, and I'd like it back entirely at stock for testing purposes.
Really should have backed it up via CWM, but... I forgot. xD

[Q] How do I flash stock recovery?

Hey everyone,
Like the title says, how do I flash stock recovery? Right now I have TWRP (?) and my device is rooted, but I want the stock recovery back and keep root. Please explain and provide a download if required.
Thanks in advance XDA!

If you flashed TWRP manually just repeat the process but use a stock recovery image instead of the twrp image. If you used a one click root tool I suggest you read some of the sticky threads and tutorials to learn how to flash things manually so you can change whatever you want in the future. There are one click restore methods too if you look around for them.

YoungStarDC said:
Hey everyone,
Like the title says, how do I flash stock recovery? Right now I have TWRP (?) and my device is rooted, but I want the stock recovery back and keep root. Please explain and provide a download if required.
Thanks in advance XDA!
Click to expand...
Click to collapse
1) Download the stock recovery (found all over this forum) into the same folder as your ADB files.
2) Go to fastboot/bootloader mode on your N7.
3) Open up command window in folder with ADB files.
4) Enter : fastboot flash recovery <nameofrecovery>.img
5) Drink a beer.

YoungStarDC said:
Hey everyone,
Like the title says, how do I flash stock recovery? Right now I have TWRP (?) and my device is rooted, but I want the stock recovery back and keep root. Please explain and provide a download if required.
Thanks in advance XDA!
Click to expand...
Click to collapse
Process to install Stock recovery on your Nexus 7 FLO
Click to expand...
Click to collapse
-1: Download the stock recovery recovery image file === >>FLO_STOCK_RECOVERY - Download link
-2: Open the folder where the recovery image file has been downloaded and rename your recovery "recovery" simply. Re-open your previous Command Prompt window.
-3: Type the following command to flash the recovery image file - using Platform tools and this Guide
Code:
fastboot flash recovery recovery.img
-4: The recovery will be flashed and the progress could be observed in the CMD window itself.
Well done, you are in stock recovery

Geodude074 said:
1) Download the stock recovery (found all over this forum) into the same folder as your ADB files.
2) Go to fastboot/bootloader mode on your N7.
3) Open up command window in folder with ADB files.
4) Enter : fastboot flash recovery <nameofrecovery>.img
5) Drink a beer.
Click to expand...
Click to collapse
philos64 said:
-1: Download the stock recovery recovery image file === >>FLO_STOCK_RECOVERY - Download link
-2: Open the folder where the recovery image file has been downloaded and rename your recovery "recovery" simply. Re-open your previous Command Prompt window.
-3: Type the following command to flash the recovery image file - using Platform tools and this Guide
Code:
fastboot flash recovery recovery.img
-4: The recovery will be flashed and the progress could be observed in the CMD window itself.
Well done, you are in stock recovery
Click to expand...
Click to collapse
Thank you both very much foe the detailed explanations. I will try to flash the stock as soon as possible and let you know how it went. Once again, thanks!
Kind regards,
Darryl
Sent from my HTC One X+ using xda premium

I tried a few times but when booting into recovery it still gets me to TWRP. I probably did something wrong somewhere. It's late so I'll try again tomorrow. This is my first nexus device and the reason I want stock recovery is so I can still receive over the air updates while being rooted. If I want over the air updates, that is the way to go right?
Sent from my Nexus 7 using xda premium

my zen faild google verification to boot up

hey
when my phone boots shows that my device is not verified by google , what to do?

Jwtiyar said:
hey
when my phone boots shows that my device is not verified by google , what to do?
Click to expand...
Click to collapse
you might have unlocked bootloader with unofficial method. nothing to worry about its just a warning devices are far more insecure. if you are worried about privacy things. believe there is nothing like secure when using digital devices. and there is not even single service provider which do not collect data. hence enjoy your unlocked device and play around

sukhwant717 said:
you might have unlocked bootloader with unofficial method. nothing to worry about its just a warning devices are far more insecure. if you are worried about privacy things. believe there is nothing like secure when using digital devices. and there is not even single service provider which do not collect data. hence enjoy your unlocked device and play around
Click to expand...
Click to collapse
Thank you bro, the problem is now its not booting (bootlooping)after upgrading bootloader, flashing twrp then flashing RBR ROM, IDK if this is ROM related or bootloader related

Jwtiyar said:
Thank you bro, the problem is now its not booting (bootlooping)after upgrading bootloader, flashing twrp then flashing RBR ROM, IDK if this is ROM related or bootloader related
Click to expand...
Click to collapse
flash boot, fastboot, recovery image for the same firmware u had working last time. if still do not boots. flash bom token, dnx, ifwi for the same firmware. flash boot, recovery and fastboot again while u flash dnx and ifwi.

sukhwant717 said:
flash boot, fastboot, recovery image for the same firmware u had working last time. if still do not boots. flash bom token, dnx, ifwi for the same firmware. flash boot, recovery and fastboot again while u flash dnx and ifwi.
Click to expand...
Click to collapse
You made it really complex bro i dont understand what to do.

Jwtiyar said:
You made it really complex bro i dont understand what to do.
Click to expand...
Click to collapse
the last working firmware. whichever was installed last time. (assume you were on latest MM ww4.21.40.233... extract it and get the files (boot.img, recovery.img, droidboot.img, splashscreen.img) in the same firmware there will be ifwi.zip extract that too and get the files (bom token, dnx , ifwi)... now copy the extracted files to adb fastboot tool folder. and then in same folder move cursor to and empty place and hold shift and right click on mouse. you will get option open command windows here.
now reboot your phone in fastboot mode and connect to PC.. now run the following commands
fastboot devices ( to see if device is recognized by pc and fastboot tool)
fastboot flash splashscreen splashscreen.img
fastboot flash token " bom token file name" (without commas )
fastboot flash dnx "dnx file name"
fastboot flash ifwi "ifwi file name"
fastboot erase boot
fastboot flash boot boot.img
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase fastboot
fastboot flash fastboot droidboot.img
fastboot reboot
keep in mind extract files from the same firmware you were on the last time when your device was working.

sukhwant717 said:
the last working firmware. whichever was installed last time. (assume you were on latest MM ww4.21.40.233... extract it and get the files (boot.img, recovery.img, droidboot.img, splashscreen.img) in the same firmware there will be ifwi.zip extract that too and get the files (bom token, dnx , ifwi)... now copy the extracted files to adb fastboot tool folder. and then in same folder move cursor to and empty place and hold shift and right click on mouse. you will get option open command windows here.
now reboot your phone in fastboot mode and connect to PC.. now run the following commands
fastboot devices ( to see if device is recognized by pc and fastboot tool)
fastboot flash splashscreen splashscreen.img
fastboot flash token " bom token file name" (without commas )
fastboot flash dnx "dnx file name"
fastboot flash ifwi "ifwi file name"
fastboot erase boot
fastboot flash boot boot.img
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot erase fastboot
fastboot flash fastboot droidboot.img
fastboot reboot
keep in mind extract files from the same firmware you were on the last time when your device was working.
Click to expand...
Click to collapse
Thank you very much bro,but the last working firmware i dont know which one was but it was 5.1.1, which firmware is that android version?

Jwtiyar said:
Thank you very much bro,but the last working firmware i dont know which one was but it was 5.1.1, which firmware is that android version?
Click to expand...
Click to collapse
device model ze551ml oe ze550ml?

sukhwant717 said:
device model ze551ml oe ze550ml?
Click to expand...
Click to collapse
ze551

Jwtiyar said:
ze551
Click to expand...
Click to collapse
download the following file extract it. now reboot your phone in fastboot mode and connect to pc. wait till pc recognize it and make detection sound.
now it extracted folder double click to run the file update bootloader.bat
all done
report back if device boots or gives any error in cmd
wait it has an error

sukhwant717 said:
download the following file extract it. now reboot your phone in fastboot mode and connect to pc. wait till pc recognize it and make detection sound.
now it extracted folder double click to run the file update bootloader.bat
all done
report back if device boots or gives any error in cmd
wait it has an error
Click to expand...
Click to collapse
before this problem happen i upgraded boorloader to MM then flash TWRP and installed MM ROM so now it has MM Custom ROM.
i did your solution and installed successfully but in adb commands as i saw give that boot.img not found then rebooted and now directly will go to installing system update and give the error (android robot with red warning icon ) .

Jwtiyar said:
before this problem happen i upgraded boorloader to MM then flash TWRP and installed MM ROM so now it has MM Custom ROM.
i did your solution and installed successfully but in adb commands as i saw give that boot.img not found then rebooted and now directly will go to installing system update and give the error (android robot with red warning icon ) .
Click to expand...
Click to collapse
when there at that error screen press and hold volume button you will enter into recovery mode. there go to option reboot bootloader phone will boot in fastboot mode
now in the extracted folder at empty place shift and right click.. then open cmd here and run command
fastboot flash boot boot.img
fastboot reboot
which mm rom you installed?
btw i have corrected the boot.img not found error. you can download and rung the bat file
https://drive.google.com/open?id=0B72QQTXqZSRwSVpwSG9iWS0tbUk

sukhwant717 said:
when there at that error screen press and hold volume button you will enter into recovery mode. there go to option reboot bootloader phone will boot in fastboot mode
now in the extracted folder at empty place shift and right click.. then open cmd here and run command
fastboot flash boot boot.img
fastboot reboot
which mm rom you installed?
btw i have corrected the boot.img not found error. you can download and rung the bat file
https://drive.google.com/open?id=0B72QQTXqZSRwSVpwSG9iWS0tbUk
Click to expand...
Click to collapse
I installed RBR ROM which based on MM , now the error gone after flashing boot.img but the will boot to asus logo and will reboot again it seems its bootloop .

sukhwant717 said:
when there at that error screen press and hold volume button you will enter into recovery mode. there go to option reboot bootloader phone will boot in fastboot mode
now in the extracted folder at empty place shift and right click.. then open cmd here and run command
fastboot flash boot boot.img
fastboot reboot
which mm rom you installed?
btw i have corrected the boot.img not found error. you can download and rung the bat file
https://drive.google.com/open?id=0B72QQTXqZSRwSVpwSG9iWS0tbUk
Click to expand...
Click to collapse
this is the output now after flashing coorected .zip file you provided:
http://paste.ubuntu.com/24395746/

Jwtiyar said:
this is the output now after flashing coorected .zip file you provided:
http://paste.ubuntu.com/24395746/
Click to expand...
Click to collapse
it is bootlooping because of incorrect system
now tell me do u want to flash custom rom or official marshmallow?

sukhwant717 said:
it is bootlooping because of incorrect system
now tell me do u want to flash custom rom or official marshmallow?
Click to expand...
Click to collapse
custom MM

Jwtiyar said:
custom MM
Click to expand...
Click to collapse
as you already downloaded that rom.. and also the recovery needed for that rom..
first of all same as earlier flash MM bootloader. ther reboot bootloader once then flash twrp. the exactly mentioned in the RBR rom thread. then go to advanced in twrp and click adb sidelaod. tick wipe dalvik cache and cache. swipe to sideload ... now run command adb sideload "rom file name"
if bootloops after flashing firmware. do a factory reset and reboot. going to sleep now 1.15 AM here. will answer tomorrow if any other question

sukhwant717 said:
as you already downloaded that rom.. and also the recovery needed for that rom..
first of all same as earlier flash MM bootloader. ther reboot bootloader once then flash twrp. the exactly mentioned in the RBR rom thread. then go to advanced in twrp and click adb sidelaod. tick wipe dalvik cache and cache. swipe to sideload ... now run command adb sideload "rom file name"
if bootloops after flashing firmware. do a factory reset and reboot. going to sleep now 1.15 AM here. will answer tomorrow if any other question
Click to expand...
Click to collapse
thank you very much now its booted successfully

Jwtiyar said:
thank you very much now its booted successfully
Click to expand...
Click to collapse
great good to know your device is alive again

sukhwant717 said:
great good to know your device is alive again
Click to expand...
Click to collapse
Thank you bro

OUTDATED***[GUIDE] Basic guide to flash a recovery and a rom via recovery in Mi A3.

This is a basic guide to flash a rom via recovery in Mi A3 as title says.
Is created to help all those that want but can't.
Please read before act, and if you don't understand....well read again.
Mi A3 is a device with treble support, and while is not difficult to flash a rom,is a little bit tricky process.
So here are the detailed steps to do achieve that.
First things first, you've got to have your bootloader unlocked. Follow below steps to do that:
-Enable developer options by going to settings/about phone and clicking 5 times on build number.
Inside developer options:
-Find and enable OEM unlocking.
-Find and enable USB debugging.
In adb tools type:
-
Code:
adb devices
reboot to bootloader.
-
Code:
adb reboot bootloader
Unlock bootloader(you will lose all your data).
Code:
fastboot flashing unlock
When the device reboot, boot once again in fastboot by powering off then power on while pressing vol down button.
Type command to full unlock bootloader.
Code:
fastboot flashing unlock_critical
Proceed to recovery flash
Notice that you've got to have all files ready, either inside external sd or in your pc. All files are at the end of this thread as links or attachments.
Also i'm suggesting OrangeFox recovery for now because is the most stable.
-First you following the orangefox recovery installation guide:
- Download the OrangeFox zip file from here or the link at the end and copy it to your device (internal or external storage)
- Extract the recovery.img from the zip and store it, on the folder where you have adb and fastboot files, on your PC
- Open a cmd line and execute these commands (being on that folder, of course):
-
Code:
adb devices
(to make sure your device is detected)
-
Code:
adb reboot bootloader
(to reboot into fastboot mode)
-
Code:
fastboot getvar current-slot
(to check what's your current active slot)
-
Code:
fastboot set_active b
(if your active slot was a, if it was b then change it to a)
-
Code:
fastboot erase boot
-
Code:
fastboot flash boot recovery.img [b](OR WHATEVER NAME YOUR RECOVERY HAVE)[/b]
-
Code:
fastboot reboot
(NOTE : Before hitting "Enter", long press Vol + on your device until you see the Android One logo.
-->> By doing this your device will be forced to boot into Recovery and not into System <<--
- Install the OrangeFox zip (always install the latest build available and always keep a copy of recovery zip file in your external sd)
- Change slot to the one that was active on the beginning of these steps and reboot to Recovery (just to make sure that the slot, in fact, was changed)
After orangefox recovery is installed, you are ready to flash your rom.
You can move your rom files inside your external or internal memory(prefer external to avoid deleting them accidentally).
To do that you can either do it before the whole procedure, or after the recovery installation since you have mtp and adb available.
Copy them drag them or push them via adb(i'm not going to extend the adb push command here)
Now the flashing steps:
-Go to partition manager inside orangefox recovery and select data/format data(red button) and press format.Type YES.
-Go back and find the rom file inside your target directory(internal or external).
-Select the rom file and flash it.
-DO NOT REBOOT.
-Go back where you have the orangefox zip file, select it and flash it.
-Leave the device as is because after the installation it will reboot itself to recovery once again.
-Once the recovery starts again go to the target folder that you have the remaining files.
-Flash magiskV20.zip (if you want your device to be rooted).
-Flash Gapps if there are any or skip this step if your ROM provider have them included.
-Flash patchnofde10 zip to avoid data encryption(if you don't do that the rom will NOT boot).
-Reboot to system and enjoy.
All files are available to the links below.
Patchnofde file is attached to this post.
I'm not responsible if you cause a nuclear war or your cat or dog stop talking to you.
Credtits to:
Orangefox recovery team https://orangefox.tech/
Orangefox recovery dev for Mi A3 https://forum.xda-developers.com/mi-a3/development/official-orangefox-recovery-mi-a3-t3986177
Topjohnwu for the Magisk and Magisk manger https://******************/
XDA Forum because they exist
All devs that put some hard work for you to have a custom recovery and a custom rom and all they hear is questions about ho to do things.
Respect them and read before post a questions.
:angel::angel::angel:

Thanks for the detailed guide, always good to have it :good: :good:

my device is encrypted and if I boot a recovery it shows the data encrypted. How to remove encryption ?

drozo8o8 said:
my device is encrypted and if I boot a recovery it shows the data encrypted. How to remove encryption ?
Click to expand...
Click to collapse
Read it first then do it.
Patchnofde is for the encryption.

sotmax said:
Read it first then do it.
Patchnofde is for the encryption.
Click to expand...
Click to collapse
nvm I think I got it

Can anybody please help? I just bought this phone and followed this guide to the letter. The phone just boots back into recovery, whatever ROM I flash.

Is there support for Android backup and restore
Please tell steps for the same also
As it is not working for me
Mobile is Booting to recovery again after restoring backup

ReekyMarko said:
Can anybody please help? I just bought this phone and followed this guide to the letter. The phone just boots back into recovery, whatever ROM I flash.
Click to expand...
Click to collapse
Okay I got it to boot to Havoc OS but my wifi and gsm calls stopped working. Also videos were flashing during playback. I guess I was doing something wrong during the whole flashing process and the device ended up without the correct firmware.
I have reverted back to stock using one of the fastboot ROM flashing scripts and everything is fine, though I would like to go Android 10 without GAPPS if possible.

Thank you very much for the guide. Do you recommend any backup with orange box? If I want to revert to stock rom, do I need to know something?

How could I update the ROM?

darkjm93 said:
Thank you very much for the guide. Do you recommend any backup with orange box? If I want to revert to stock rom, do I need to know something?
Click to expand...
Click to collapse
You can go back to stock by flashing stock image with mi flashtool

ReekyMarko said:
Can anybody please help? I just bought this phone and followed this guide to the letter. The phone just boots back into recovery, whatever ROM I flash.
Click to expand...
Click to collapse
That's because you didn't follow it to the letter.
You have to flash Patchnofde to boot to rom.

vishwadeepmanu said:
Is there support for Android backup and restore
Please tell steps for the same also
As it is not working for me
Mobile is Booting to recovery again after restoring backup
Click to expand...
Click to collapse
Same as above.
If you don't flash patch for the encryption, you ll end up to recovery again. Also I recommend to read carefully the steps with the recovery flashing. You have to be sure that the slot is what it was at the beginning.
A out the Android backup, yes. You can take and restore backups freely.

Hello,
@sotmax
Thank you for your guide.
@ANyOne i have unlocked the bootloader, but after that, when i'm in fastboot mode, i'm not being detected by the adb devices command. Any idea why ?

mkpanic said:
Hello,
@sotmax
Thank you for your guide.
@ANyOne i have unlocked the bootloader, but after that, when i'm in fastboot mode, i'm not being detected by the adb devices command. Any idea why ?
Click to expand...
Click to collapse
Because ADB and fastboot are different modes and using different commands. In fastboot use "fastboot devices".

_mysiak_ said:
Because ADB and fastboot are different modes and using different commands. In fastboot use "fastboot devices".
Click to expand...
Click to collapse
Thank your for the answer.

If I only want to root the stock installing Orange, this guide works?

fastboot set_active command is not working...only fastboot options are displayed..Any solution?

sibikallikkat said:
fastboot set_active command is not working...only fastboot options are displayed..Any solution?
Click to expand...
Click to collapse
fastboot --set-active=a
fastboot --set-active=b

hi, i followed the guide to flash los17 with BiTGApps.
I also flashed the nofde patch. The phones boots normaly but i have no access to internal storage. All the folders have random numbers and letters. Any ideas?

Question Realme GT ME Bricked

Hello guys!
I tried to install magisk so I got a bootloop
Someone told me that i should relock and unlock the bootloader again
Now I have locked bootloader, stock recovery and dont have fastboot
3 free versions of MSM just give me "sahara communication failed" error
Help me please!

try enter to fastboot powering on your phone with vol+ and pwr key, unlock your bootloader, flash vbmeta.img:
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
and then try enter to your system.
If that not works, try do an full recover with the stock recovery first and repeat the first method.
If that not works, try download your firmware in https://realmefirmware.com/realme-firmware-update/
and in the fastboot menu try fastboot all extracted partitions using mct_ofp_extractor: https://www.google.com/search?q=mct_ofp_extractor.exe
good luck!

Hi Help needed pls, I bricked my RealMe RMX3366 when during Magisk installation
How do I rollback to the ROM? - https://4pda.to/forum/index.php?showtopic=1040117&st=0#entry112293156
I tried installation TWRP for RMX3370?
How do I Flash using Fastboot or TWRP 3.7?

I dont have fastboot bro my bootloader is locked

_M5_F90_ said:
I dont have fastboot bro my bootloader is locked
Click to expand...
Click to collapse
I have bootloader unlocked but can't flash to stock ROM!

I've unlock the bootloader but i don't write fastboot disabile verify,how to for root?and the file vbmeta Is create when launch this command?

_M5_F90_ said:
I dont have fastboot bro my bootloader is locked
Click to expand...
Click to collapse
maybe you should restore to stock ROM first with stock recovery?
if that not work for you, you can try use PC flash tool like this: https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool_V2.zip and use the ofp file as you can download from here: https://realmefirmware.com/realme-firmware-update/
Enter fastboot mode - Shutdown phone,then long press the power & volume down key simultaneous to enter the fastboot mode interface
good luck!

Juliancth said:
I have bootloader unlocked but can't flash to stock ROM!
Click to expand...
Click to collapse
try this tool: https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool_V2.zip and use the ofp file as you can download from here: https://realmefirmware.com/realme-firmware-update/
tutorial: https://c.realme.com/in/post-details/1283756632748064768

zopptex said:
try this tool: https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool_V2.zip and use the ofp file as you can download from here: https://realmefirmware.com/realme-firmware-update/
tutorial: https://c.realme.com/in/post-details/1283756632748064768
Click to expand...
Click to collapse
Thank you Zopptex, I just realised there's one for RMX 3360 and 3363. Do you know where's the firmware for Realme RMX3366 Master Explorer Edition? maybe I am in a wrong thread but your help is much appreciated!!

zopptex said:
try this tool: https://download.c.realme.com/flash/Flash_tool/realme_Flash_Tool_V2.zip and use the ofp file as you can download from here: https://realmefirmware.com/realme-firmware-update/
tutorial: https://c.realme.com/in/post-details/1283756632748064768
Click to expand...
Click to collapse
Hi Bro, thank you for the guide. I bumped into Cannot Find Central Directory on Realme Flash Tool when I click Flash! Appreciate your help bro

zopptex said:
try enter to fastboot powering on your phone with vol+ and pwr key, unlock your bootloader, flash vbmeta.img:
fastboot flashing unlock
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
and then try enter to your system.
If that not works, try do an full recover with the stock recovery first and repeat the first method.
If that not works, try download your firmware in https://realmefirmware.com/realme-firmware-update/
and in the fastboot menu try fastboot all extracted partitions using mct_ofp_extractor: https://www.google.com/search?q=mct_ofp_extractor.exe
good luck!
Click to expand...
Click to collapse
Hi ZoppTex, could you pls assist to provide a guide of the 3rd method pls?
which is:
If that not works, try download your firmware in https://realmefirmware.com/realme-firmware-update/
and in the fastboot menu try fastboot all extracted partitions using mct_ofp_extractor: https://www.google.com/search?q=mct_ofp_extractor.exe
MCT_OFP_extractor method pls

Juliancth said:
Hi ZoppTex, could you pls assist to provide a guide of the 3rd method pls?
which is:
If that not works, try download your firmware in https://realmefirmware.com/realme-firmware-update/
and in the fastboot menu try fastboot all extracted partitions using mct_ofp_extractor: https://www.google.com/search?q=mct_ofp_extractor.exe
MCT_OFP_extractor method pls
Click to expand...
Click to collapse
I just found this download point for rmx3366, I cant verify if this file can be use for your phone: https://support.halabtech.com/index.php?a=downloads&b=folder&id=139179
Maybe once you got the right ofp file, you can just use the official Realmen Flash Tool?
For the third method:
Once you got the right ofp file for your phone, just open the extractor and extract ever partition from ofp file you found, and try flash them one by one using fastboot tool, commands are like: fastboot flash *partition* *.img file* with your phone in Fastboot Mode.
That's all I can tell you because I realize that your don't have my phone model: rmx3363.
Goog luck.

zopptex said:
I just found this download point for rmx3366, I cant verify if this file can be use for your phone: https://support.halabtech.com/index.php?a=downloads&b=folder&id=139179
Maybe once you got the right ofp file, you can just use the official Realmen Flash Tool?
For the third method:
Once you got the right ofp file for your phone, just open the extractor and extract ever partition from ofp file you found, and try flash them one by one using fastboot tool, commands are like: fastboot flash *partition* *.img file* with your phone in Fastboot Mode.
That's all I can tell you because I realize that your don't have my phone model: rmx3363.
Goog luck.
Click to expand...
Click to collapse
thanks bro, I managed to get it fix at my local Realme Service Centre. Friendly technician has assisted me in Malaysia

you can flash stock firmware using this file
https://github.com/italorecife/OppoRealme-OFP-Flash/releases/download/1.0/OppoRealme-OFP-Flash_1.0-x64_Windows.zip