Related
Hi!
I've had trouble installing a GSI on my HTC U12+, but AOSP GSI maintainer phhusson helped me, so I'm sharing a quick tutorial.
1. Download and extract Android SDK Platform Tools
2. Download the GSI of your choice (ARM64, AB variant), and move it inside platform tools folder (I've only tested AOSP 10.0)
3. Download and extract the HTC RUU Decryption and Extraction Tool
4. Download the RUU for your device and move it inside HTC-RUU_Decrypt_Tool_XXX folder
5. Follow instructions from the RUU Decryption Tool thread to decrypt and extract the RUU, with all default settings
6. Move the vbmeta.img file you've just extracted (it's inside HTC-RUU_Decrypt_Tool_XXX/OUT_XXX/firmware) to the platform tools folder
6. Unlock bootloader
7. Restore stock firmware with microSD method or factory reset if you already have stock firmware
8. Reboot in bootloader
9. From a computer, launch a terminal, change directory to the platform tools folder, then execute "fastboot erase system"
10. Then execute "fastboot flash system <your_gsi.img>"
11. Execute "fastboot reboot bootloader"
12. Execute "fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification" (WARNING : According to 5m4r7ph0n36uru, you can't flash vbmeta via fastboot if your device isn't S-OFF, you have to use TWRP, but I don't know how, so ask someone who knows! I will update my tutorial once I see instructions.)
13. Execute "fastboot reboot"
It should boot the GSI!
On first boot it may ask for a previous decryption password and complain about a corrupt data partition. You can erase it (you will lose what was inside).
If you have bugs or issues with the GSI, there may be workarounds here: https://github.com/phhusson/treble_experimentations/wiki/HTC-U12-Plus
Enjoy your GSI on your HTC U12+!
Romano2K said:
Hi!
I've had trouble installing a GSI on my HTC U12+, but AOSP GSI maintainer phhusson helped me, so I'm sharing a quick tutorial.
1. Download and extract Android SDK Platform Tools
2. Download the GSI of your choice (ARM64, AB variant), and move it inside platform tools folder (I've only tested AOSP 10.0)
3. Download and extract the HTC RUU Decryption and Extraction Tool
4. Download the RUU for your device and move it inside HTC-RUU_Decrypt_Tool_XXX folder
5. Follow instructions from the RUU Decryption Tool thread to decrypt and extract the RUU, with all default settings
6. Move the vbmeta.img file you've just extracted (it's inside HTC-RUU_Decrypt_Tool_XXX/OUT_XXX/firmware) to the platform tools folder
6. Unlock bootloader
7. Restore stock firmware with microSD method or factory reset if you already have stock firmware
8. Reboot in bootloader
9. From a computer, launch a terminal, change directory to the platform tools folder, then execute "fastboot erase system"
10. Then execute "fastboot flash system <your_gsi.img>"
11. Execute "fastboot reboot bootloader"
12. Execute "fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification"
13. Execute "fastboot reboot"
It should boot the GSI!
On first boot it may ask for a previous decryption password and complain about a corrupt data partition. You can erase it (you will lose what was inside).
If you have bugs or issues with the GSI, there may be workarounds here: https://github.com/phhusson/treble_experimentations/wiki/HTC-U12-Plus
Enjoy your GSI on your HTC U12+!
Click to expand...
Click to collapse
Hello, which GSI did you tried from the list? If you tried more then one, which is the one that runs better?
Thank you
Hi!
I have tried AOSP 10.0 v206 system-quack-arm64-ab-gapps.img. v208 is out now.
I still have to try others.
Let us know if you find one working better than others!
i have problem with this line fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification
My fastboot say C:\adb\fastboot.exe: unknown option -- disable-verity How to fix this?
Edit: My htc is dead, power button dont work, does not respond to the charger and PC.
mientus25 said:
i have problem with this line fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification
My fastboot say C:\adb\fastboot.exe: unknown option -- disable-verity How to fix this?
Edit: My htc is dead, power button dont work, does not respond to the charger and PC.
Click to expand...
Click to collapse
Hi mientus25! I'm sorry if you bricked your smartphone trying to flash it. I think the --disable-verity option not working was a matter of platform tools (adb) version.
My htc have actually hard brick. I will try to send it to the service(warranty). Will tell you what comes of it.
fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification doesn't working
it says: not allowed in production device
bootloader:unlocked
xreeman said:
fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification doesn't working
it says: not allowed in production device
bootloader:unlocked
Click to expand...
Click to collapse
If on 2.55.401.1 try flashing this vbmeta. It already has verity and verification disabled, pulled from an S-OFF device allowing the above flashing commands. It flashed fine on my U12+ and I've been able to boot PE 10 GSI afterwards without any problems.
@Romano2K feel free to add it to the OP.
5m4r7ph0n36uru said:
If on 2.55.401.1 try flashing this vbmeta. It already has verity and verification disabled, pulled from an S-OFF device allowing the above flashing commands. It flashed fine on my U12+ and I've been able to boot PE 10 GSI afterwards without any problems.
@Romano2K feel free to add it to the OP.
Click to expand...
Click to collapse
Hello, can I may ask you if I can send you a PM? I have an HTC u12+ and I would like to install and Android 10 GSI and I would like a step by step help to do it. Can you please also tell me which bugs are you facing with it? Thank you very much
GaetanoS.89 said:
Hello, can I may ask you if I can send you a PM? I have an HTC u12+ and I would like to install and Android 10 GSI and I would like a step by step help to do it. Can you please also tell me which bugs are you facing with it? Thank you very much
Click to expand...
Click to collapse
No help by PM. I cannot do this for professional reasons. And also for personal reasons not to give individual support.
5m4r7ph0n36uru said:
No help by PM. I cannot do this for professional reasons. And also for personal reasons not to give individual support.
Click to expand...
Click to collapse
All right, would you please write a message over with all the steps here? Thank you
GaetanoS.89 said:
All right, would you please write a message over with all the steps here? Thank you
Click to expand...
Click to collapse
Starting from a Stock ROM, Bootloader Unlocked, I took the following steps to flash and boot an Android 10 GSI to my HTC U12+:
Go to Settings > System and perform a factory reset
Reboot in the Bootloader by
Code:
adb reboot bootloader
Delete the system and data partition by
Code:
fastboot erase data
and
Code:
fastboot erase system
Flash the nonverity vbmeta image via
Code:
fastboot flash vbmeta nameofvbmeta.img
(the vbmeta image must be in the fastboot folder on your computer)
Flash the GSI via
Code:
fastboot flasch system nameofgsi.img
(the GSI must be in the fastboot folder on your computer)
Reboots the HTC U12+ into Download Mode and perform another Factory Reset
Reboot and enjoy
If /data still can't be read, do another Factory Reset from settings menu
https://www.xda-developers.com/goog...al&utm_source=twitter.com&utm_campaign=buffer
Wiil this work with the U12+???
It may work for GSIs with a fixed verity status. Thus it doesn't work for some Android 10 GSIs without flashing a noverity vbmeta as. Thus I decided long ago, to never recommend such tools, and not to help people who used one, as those using such tools most of the time didn't even care learn the basics of adb and fastboot. I can't remember anyone, who used a tool, who's ever been fully capable to identify potential problems and errors, let alone how to solve them. And the latter is the baseline to start modding a device.
Sent from my Pixel 4 XL using XDA Labs
5m4r7ph0n36uru said:
Starting from a Stock ROM, Bootloader Unlocked, I took the following steps to flash and boot an Android 10 GSI to my HTC U12+:
Go to Settings > System and perform a factory reset
Reboot in the Bootloader by
Delete the system and data partition by and
Flash the nonverity vbmeta image via (the vbmeta image must be in the fastboot folder on your computer)
Flash the GSI via (the GSI must be in the fastboot folder on your computer)
Reboots the HTC U12+ into Download Mode and perform another Factory Reset
Reboot and enjoy
If /data still can't be read, do another Factory Reset from settings menu
Click to expand...
Click to collapse
Hello,
I have unlocked the bootloader yesterday, and I was having a look to your steps, and I noticed you are not using TWRP. Are you doing everything by CMD right?
Romano2K said:
Hi!
I've had trouble installing a GSI on my HTC U12+, but AOSP GSI maintainer phhusson helped me, so I'm sharing a quick tutorial.
1. Download and extract Android SDK Platform Tools
2. Download the GSI of your choice (ARM64, AB variant), and move it inside platform tools folder (I've only tested AOSP 10.0)
3. Download and extract the HTC RUU Decryption and Extraction Tool
4. Download the RUU for your device and move it inside HTC-RUU_Decrypt_Tool_XXX folder
5. Follow instructions from the RUU Decryption Tool thread to decrypt and extract the RUU, with all default settings
6. Move the vbmeta.img file you've just extracted (it's inside HTC-RUU_Decrypt_Tool_XXX/OUT_XXX/firmware) to the platform tools folder
6. Unlock bootloader
7. Restore stock firmware with microSD method or factory reset if you already have stock firmware
8. Reboot in bootloader
9. From a computer, launch a terminal, change directory to the platform tools folder, then execute "fastboot erase system"
10. Then execute "fastboot flash system <your_gsi.img>"
11. Execute "fastboot reboot bootloader"
12. Execute "fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification"
13. Execute "fastboot reboot"
It should boot the GSI!
On first boot it may ask for a previous decryption password and complain about a corrupt data partition. You can erase it (you will lose what was inside).
If you have bugs or issues with the GSI, there may be workarounds here: https://github.com/phhusson/treble_experimentations/wiki/HTC-U12-Plus
Enjoy your GSI on your HTC U12+!
Click to expand...
Click to collapse
Hello I am trying to follow all the steps on the guode, but when I have to flash the vbmeta file from Bootloader Mode I am getting this:
C:\Users\User\Desktop\ADB2>fastboot flash vbmeta vbmeta.img --disable-verity --disable-verification
Rewriting vbmeta struct at offset: 0
Sending 'vbmeta' (4 KB) OKAY [ 0.004s]
Writing 'vbmeta' FAILED (remote: 'Not allowed on PRODUCTION device')
fastboot: error: Command failed
If I try to install the vbmeta from Download Mode I am getting this error
GaetanoS.89 said:
Hello,
I have unlocked the bootloader yesterday, and I was having a look to your steps, and I noticed you are not using TWRP. Are you doing everything by CMD right?
Click to expand...
Click to collapse
Yes I'm doing everything from CMD indeed. Always do so, as long as it is possible.
@Romano2K vbmeta can't be flashed via fastboot on S-On/production devices. It has to be flashed as update.zip from TWRP. It should be mentioned anywhere.
5m4r7ph0n36uru said:
Yes I'm doing everything from CMD indeed. Always do so, as long as it is possible.
@Romano2K vbmeta can't be flashed via fastboot on S-On/production devices. It has to be flashed as update.zip from TWRP. It should be mentioned anywhere.
Click to expand...
Click to collapse
So how do I have to proceed??
9. From a computer, launch a terminal, change directory to the platform tools folder, then execute "fastboot erase system"
10. Then execute "fastboot flash system <your_gsi.img>"
11. Execute "fastboot reboot bootloader"
And after?
GaetanoS.89 said:
So how do I have to proceed??
9. From a computer, launch a terminal, change directory to the platform tools folder, then execute "fastboot erase system"
10. Then execute "fastboot flash system <your_gsi.img>"
11. Execute "fastboot reboot bootloader"
And after?
Click to expand...
Click to collapse
Which software version are you running!?
Sent from my Pixel 4 XL using XDA Labs
5m4r7ph0n36uru said:
Which software version are you running!?
Click to expand...
Click to collapse
I was running Android 9 stock. After a few trials I have been able to install and boot the Pixel Experience and the permessiver and everything seems to work without flashing the vbmeta file
Here's what I've learned far about the E6:
Mostly from Treble Info app from Hackintosh Five
VNDK-28
Arm32 BINDER64
It's actually AB, according to it having System As Root.
No Seamless upgrade.
Binder64-AB/A64-AB GSIs work on this device.
Quack GSI should be the first we focus on.
TO INSTALL:
Code:
fastboot -w flash system <gsiname.img>
BOOTS
Quack GSI (AOSP 10, bb)!
Will list others as I come across them.
This is awesome.
I got LOS 16 bvn to boot.
The ril must be off or something, it had no connection.
I've got stock rom with encryption disabled and verity disabled, full magisk root living inside the boot.img..
And got twrp with touch adb and mtp working...
But it looks a lil funny cause the port has slightly smaller image so it doesn't fully fill screen.
But everything seems to work, including flashing zips..
Should that be a thread by its self?
LgPWN'd said:
This is awesome.
I got LOS 16 bvn to boot.
The ril must be off or something, it had no connection.
I've got stock rom with encryption disabled and verity disabled, full magisk root living inside the boot.img..
And got twrp with touch adb and mtp working...
But it looks a lil funny cause the port has slightly smaller image so it doesn't fully fill screen.
But everything seems to work, including flashing zips..
Should that be a thread by its self?
Click to expand...
Click to collapse
Yes, please! it's very nice that u did that, I'll link it in the main post when u do
For a working recovery see this
https://forum.xda-developers.com/moto-e6/development/development-team-looking-testors-t4120171
tried:
>fastboot flash system <image.img>
for all the 3 Quack GSI: system-quack-arm32_binder64-ab-gapps.img.xz, system-quack-arm32_binder64-ab-go.img.xz and system-quack-arm32_binder64-ab-vanilla.img.xz
The system just keeps looping the andriod logo...
Anyone knows of a twrp version that works with this moto e6?
soulmaker2207 Did you do the -w in fastboot after you installed the gsi? If you didn't it is definitely worth a try Beware it will erase all data including the internal sd
soulmaker2207 said:
tried:
>fastboot flash system <image.img>
for all the 3 Quack GSI: system-quack-arm32_binder64-ab-gapps.img.xz, system-quack-arm32_binder64-ab-go.img.xz and system-quack-arm32_binder64-ab-vanilla.img.xz
The system just keeps looping the andriod logo...
Anyone knows of a twrp version that works with this moto e6?
Click to expand...
Click to collapse
Alongside the fastboot -w advice, try renaming every img you download to "system.img." I have had way more success doing that than using long img names.
Also, I noticed that for a lot of GSIs, USB Tethering does not work.
Just installed latest phusson aosp android 11 gsi, over latest stock pie, using fastboot -w option, of course. Boots great, working VoLTE, sms, etc. Super fast performance. Usb tethering greyed out. That's the only problem I sound so far.
scottyrick2 said:
Just installed latest phusson aosp android 11 gsi, over latest stock pie, using fastboot -w option, of course. Boots great, working VoLTE, sms, etc. Super fast performance. Usb tethering greyed out. That's the only problem I sound so far.
Click to expand...
Click to collapse
Yeah USB Tethering doesn't seem to work for ANY GSI ROMs.
I am running Android 11 AOSP now using phhusson gsi rom V300.l. For your phone calling and sms to work properly, you need to follow this guide every time you reboot or power off/on. I mean every time.
[Razer Phone 2/as of v300.l/non-Verizon] IMS still needs some manual intervention to re-enable after reboot. · Issue #1681 · phhusson/treble_experimentations · GitHub
I have done this often enough now that I can do it in under 30 seconds. Hopefully, this issue will be fixed soon, but it is not that difficult to fix yourself.
scottyrick2 said:
I am running Android 11 AOSP now using phhusson gsi rom V300.l. For your phone calling and sms to work properly, you need to follow this guide every time you reboot or power off/on. I mean every time.
[Razer Phone 2/as of v300.l/non-Verizon] IMS still needs some manual intervention to re-enable after reboot. · Issue #1681 · phhusson/treble_experimentations · GitHub
I have done this often enough now that I can do it in under 30 seconds. Hopefully, this issue will be fixed soon, but it is not that difficult to fix yourself.
Click to expand...
Click to collapse
How odd. I can't get any Android 11 GSI to work on my E6
Are you trying to update from Android 10? I don't think you can.
scottyrick2 said:
Are you trying to update from Android 10? I don't think you can.
Click to expand...
Click to collapse
Yes I was trying to update from Android 10
I am running phhusson aosp 11 v300.l gsi rom right now. Super fast. Amazing, really.
If you are on the T-Mobile system, you need to do 3 things in order to make VoLTE and sms work properly. Hopefully, this will not be needed in future updates, but it might be.
1. using a root file explorer (I use 3C) to locate and move the org.codeaurora.ims folder from /data/app to /system/app
2. reboot
3. using *#*#4636*#*# on the dialer to open "phone information menu", change the band to GMS/WCDMA/LTE, and close the menu.
That's it. I hope this helps you to consider moving up to gsi roms. They are truly amazing.
Greetings people and like minded friends of the internet (and fellow trashman) I come bearing great gifts of flashing goodness. For the XT2005-5, I needed a nice de-Googled imaged phone for usage. As most of you probably have found in searching, finding TWRP and getting it to work has been a tedious journey. Never fear, there is a way to drop images on this phone. I will give you my experience and steps I took, in hopes it may help you save a bit of time.
1.) Download the factory image for the device found here
https://mirrors.lolinet.com/firmware/motorola/surfna/official/RETUS/ I used this one https://mirrors.lolinet.com/firmwar...-DEFAULT_regulatory-XT2005-5-SKU6_CFC.xml.zip Use a program like 7-Zip to extract it to a folder of your liking and you will use this folder later in the process. Of course, you're welcome to stop here and just flash the factory image and be done. But after all, why would you be reading this post if you wanted to just stop here, right?!
2.) Now find a GSI system image of your liking for flashing to the phone. I used the following system image from PHH (KUDOS FOR THE MAN WHO ROCKS GREAT ANDROID SKILLS) https://github.com/phhusson/treble_experimentations/releases For this phone you can you ARM32/Binder64/AB and I decided to go with
system-roar-arm32_binder64-ab-vndklite-vanilla.img.xz as I wanted no GAPPS. You will need to use 7-Zip again to extract the image from the archive file you've download. You can extract this file anywhere for the time being.
3.) Rename the extracted image from step 2 to system.img (just for simplicity) and put the file in the same directory you've created from step1.
4.) Now create a flashfile2.bat with the following and put this .bat file in the same directory as Step1
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot erase modemst1
fastboot erase modemst2
fastboot erase userdata
fastboot erase cache
fastboot erase DDR
fastboot flash fsg fsg.mbn
fastboot oem fb_mode_clear
echo -------------------------------------------------------------------------
echo please scroll up and check your flash for any errors
echo -------------------------------------------------------------------------
pause
fastboot reboot
exit
5.) You will notice that I modified the .bat to flash the system.img that was downloaded in Step 2. Keep in mind, this method will re-write your system and you will LOSE ALL OF YOUR DATA so ensure you have YOUR DATA BACKED UP.
Run the flashfile2.bat file after you've connected your USB cable and you're at the bootloader screen
You already unlocked the bootloader, right? Hopefully, you're at least to BL screen, right after you've researched a bit about your phone .
b00ster23 said:
Greetings people and like minded friends of the internet (and fellow trashman) I come bearing great gifts of flashing goodness. For the XT2005-5, I needed a nice de-Googled imaged phone for usage. As most of you probably have found in searching, finding TWRP and getting it to work has been a tedious journey. Never fear, there is a way to drop images on this phone. I will give you my experience and steps I took, in hopes it may help you save a bit of time.
1.) Download the factory image for the device found here
https://mirrors.lolinet.com/firmware/motorola/surfna/official/RETUS/ I used this one https://mirrors.lolinet.com/firmwar...-DEFAULT_regulatory-XT2005-5-SKU6_CFC.xml.zip Use a program like 7-Zip to extract it to a folder of your liking and you will use this folder later in the process. Of course, you're welcome to stop here and just flash the factory image and be done. But after all, why would you be reading this post if you wanted to just stop here, right?!
2.) Now find a GSI system image of your liking for flashing to the phone. I used the following system image from PHH (KUDOS FOR THE MAN WHO ROCKS GREAT ANDROID SKILLS) https://github.com/phhusson/treble_experimentations/releases For this phone you can you ARM32/Binder64/AB and I decided to go with
system-roar-arm32_binder64-ab-vndklite-vanilla.img.xz as I wanted no GAPPS. You will need to use 7-Zip again to extract the image from the archive file you've download. You can extract this file anywhere for the time being.
3.) Rename the extracted image from step 2 to system.img (just for simplicity) and put the file in the same directory you've created from step1.
4.) Now create a flashfile.bat with the following and put this file in the same directory as Step1
echo off
fastboot getvar max-sparse-size
fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash modem NON-HLOS.bin
fastboot flash fsg fsg.mbn
fastboot flash dsp adspso.bin
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash system system.img
fastboot flash recovery recovery.img
fastboot flash vendor vendor.img
fastboot flash oem oem.img
fastboot erase modemst1
fastboot erase modemst2
fastboot erase userdata
fastboot erase cache
fastboot erase DDR
fastboot flash fsg fsg.mbn
fastboot oem fb_mode_clear
echo -------------------------------------------------------------------------
echo please scroll up and check your flash for any errors
echo -------------------------------------------------------------------------
pause
fastboot reboot
exit
5.) You will notice that I modified the .bat to flash the system.img that was downloaded in Step 2. Keep in mind, this method will re-write your system and you will LOSE ALL OF YOUR DATA so ensure you have YOUR DATA BACKED UP.
Run the .bat file after you've connected your USB cable and you're at the bootloader screen
You already unlocked the bootloader, right? Hopefully, you're at least to BL screen, right after you've researched a bit about your phone .
Click to expand...
Click to collapse
ARM32/Binder64/AB = a64 a/b OR potentially a64bvN/a64bvS
Something to make it easier on others.
There was a link for TWRP on this post but had to remove it because the link is dead. I'll explore other options before re-updating this post
koyo said:
Some things to add to this post to make it easier
1) ARM32/Binder64/AB = a64 a/b OR potentially a64bvN/a64bvS
2) I prefer doing it via this method rather than flashing stock files: - E6 AIO ToolKit Mod Release- | XDA Developers Forums (xda-developers.com)
This has a TWRP for E6 which allows you to flash things like magisk, universal encryption disabler, gapps, et cetera. Things that might not be built into the native ROM.
Click to expand...
Click to collapse
The links are all broken, and I see no TWRP available.
b00ster23 said:
The links are all broken, and I see no TWRP available.
Click to expand...
Click to collapse
Ugh oops. This is the result of going off of memory from months ago rather than checking to see if everything's up to date.
The developers that made that TWRP have an OrangeFox recovery to download on their telegram
Telegram: Contact @android_general_chat
t.me
koyo said:
Ugh oops. This is the result of going off of memory from months ago rather than checking to see if everything's up to date.
The developers that made that TWRP have an OrangeFox recovery to download on their telegram
Telegram: Contact @android_general_chat
t.me
Click to expand...
Click to collapse
Yeah, I don't see any links to the OrangeFox recovery img... Keep in mind this is for the XT2005-5 variant (SURFNA) unless OrangeFox is universal
b00ster23 said:
Yeah, I don't see any links to the OrangeFox recovery img... Keep in mind this is for the XT2005-5 variant (SURFNA) unless OrangeFox is universal
Click to expand...
Click to collapse
Telegram: Contact @Android_General_Chat
t.me
I've been trying to root my Note 9T. The bootloader has been unlocked, and I've followed a guide from here: https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/
I'm now stuck in a bootloop.
Anyone been successful?
I additionally tried using a different version of TWRP, which wiped the "misc" partition. Can anyone provide an image dump of the misc partition so I can flash it back on? I can't find a copy of misc in the stock firmware file.
UPDATE 1:
I put the full stock image back on and am back to having a working unrooted phone, so I don't need the misc image. Would really like to get this thing rooted though.
I've installed the Magisk APK, patched the boot image, and flashed it. But this also results in a boot loop. If I flash the stock image back it works again. Any ideas what's going on here?
UPDATE 2:
I got it working! The key was to flash the stock vbmeta.img with fastboot functions to disable it.
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Hiya. I've tried that and managed to get to the twrp page. However, when I go to install magisk via twrp, it just reboots into a bootloop. Any ideas?
Update: This seems to have worked.
[SOLVED] Phone gets stuck in bootloop if I try to install Magisk ZIP!
From the forum I followed these step to install magisk: - Patched my boot.img of my current rom using Magisk Manager and flashed via fastboot - After rebooting from fastboot it got stuck in recovery so had to wipe all data and it booted finally...
forum.xda-developers.com
Did you manage to get Magisk working after the reinstall of stock firmware, or you've just resolved the bootloop?
dsclee1 said:
I've been trying to root my Note 9T. The bootloader has been unlocked, and I've followed a guide from here: https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/
I'm now stuck in a bootloop.
Anyone been successful?
I additionally tried using a different version of TWRP, which wiped the "misc" partition. Can anyone provide an image dump of the misc partition so I can flash it back on? I can't find a copy of misc in the stock firmware file.
UPDATE 1:
I put the full stock image back on and am back to having a working unrooted phone, so I don't need the misc image. Would really like to get this thing rooted though.
I've installed the Magisk APK, patched the boot image, and flashed it. But this also results in a boot loop. If I flash the stock image back it works again. Any ideas what's going on here?
UPDATE 2:
I got it working! The key was to flash the stock vbmeta.img with fastboot functions to disable it.
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
I'm interesting in at least rooting and if possible install TWRP .
Can you post i complete procedure to root the note 9 T ?
Thanks
I can have a go. But I'm not 100% sure what exact steps I took that got it working, as I flashed and re-flashed several times. Give this a try and let me know if it works or not?
WARNING: EXPECT TO LOSE ALL THE DATA ON YOUR PHONE!
Step 1
Obviously you need to unlock the bootloader first: https://en.miui.com/unlock/
If you haven't done this already, after your application it's likely you might have to wait 7 days before Xiaomi actually let you unlock.
Unlocking wipes your data.
Step 2
Start the phone normally. Copy the latest magisk apk (https://github.com/topjohnwu/Magisk/releases) over to the phone and install it.
Step 3
Find the correct original ROM for your device (https://xiaomifirmwareupdater.com/miui/cannong/). You'll need the full image. From the ROM extract the boot.img and vbmeta.img. Copy the boot.img over to your phone.
Step 4
In magisk choose the option to install and select "Select and Patch a File" (should be the only option anyway). Select the boot.img you copied over. This will produce a new file called something like "magisk_patched-22100_XXXXX.img". Copy this file off your phone and onto your computer.
Step 5
Boot your phone to fastboot mode (you should already know how to do this, as you would have had to have done it to unlock your phone in the first place - Hold down Volume Down and the Power button at the same time).
Step 6
Run the following commands (obviously replace the boot image with the correct magisk image, and use the vbmeta.img you took from the ROM):
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched-22100_XXXXX.img
Hopefully this will work. But I can't be 100% sure, as the disabling of "verity" could mean that your encrypted user data now can't be read (if you've only just unlocked the bootloader then you're not going to have any data anyway, so not too much of an issue). If this is the case it's likely you'll now need to factory reset the phone. Hold down Volume Up and Power on start to reach the stock recovery menu, and there's a selection for factory reset. You can also install TWRP at this point, and could then use it's factory reset function instead. I downloaded this version of TWRP: https://www.mediafire.com/file/ou8553psro9yyt2/3.4.2_redmi_note_9_5G.rar/file, which came from the other rooting guide (https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/ - which didn't work). Just flash that version of TWRP to the recovery partition (fastboot flash recovery recovery.img), and ignore all the steps given in the guide it came from.
Let me know how you get on.
sorry for the answer delay.
Adding my 2 cents about unlocking the bootlader .
In order to do it .
FIRST - do not try it from a virtual PC . It does not work (at least it did not work for me)
SECOND , before to run the xiaomi batch_unlock bootlader , don't forget to update google usb drivers
I hard some hard time to just connect the unlocker to my phone . Now i have to wait 167 hours to complete the process .
dsclee1 said:
I've been trying to root my Note 9T. The bootloader has been unlocked, and I've followed a guide from here: https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/
I'm now stuck in a bootloop.
Anyone been successful?
I additionally tried using a different version of TWRP, which wiped the "misc" partition. Can anyone provide an image dump of the misc partition so I can flash it back on? I can't find a copy of misc in the stock firmware file.
UPDATE 1:
I put the full stock image back on and am back to having a working unrooted phone, so I don't need the misc image. Would really like to get this thing rooted though.
I've installed the Magisk APK, patched the boot image, and flashed it. But this also results in a boot loop. If I flash the stock image back it works again. Any ideas what's going on here?
UPDATE 2:
I got it working! The key was to flash the stock vbmeta.img with fastboot functions to disable it.
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Click to expand...
Click to collapse
ive been trying for the last 4 hours to flash twrp on my redmi note 9T 5g global..can you please explain to me how you got it to work. i flashed the recovery.img and vbmeta.img file that i got from the unofficialtwrp.com download, when i flash boot recovery.img, it just reboots my phone into normal...and i missing something? My device is on Miui 12.0.8.0 andriod 10. should i be on the new update 12.5 andriod 11 for it to work. Please help.
dsclee1 said:
I can have a go. But I'm not 100% sure what exact steps I took that got it working, as I flashed and re-flashed several times. Give this a try and let me know if it works or not?
WARNING: EXPECT TO LOSE ALL THE DATA ON YOUR PHONE!
Step 1
Obviously you need to unlock the bootloader first: https://en.miui.com/unlock/
If you haven't done this already, after your application it's likely you might have to wait 7 days before Xiaomi actually let you unlock.
Unlocking wipes your data.
Step 2
Start the phone normally. Copy the latest magisk apk (https://github.com/topjohnwu/Magisk/releases) over to the phone and install it.
Step 3
Find the correct original ROM for your device (https://xiaomifirmwareupdater.com/miui/cannong/). You'll need the full image. From the ROM extract the boot.img and vbmeta.img. Copy the boot.img over to your phone.
Step 4
In magisk choose the option to install and select "Select and Patch a File" (should be the only option anyway). Select the boot.img you copied over. This will produce a new file called something like "magisk_patched-22100_XXXXX.img". Copy this file off your phone and onto your computer.
Step 5
Boot your phone to fastboot mode (you should already know how to do this, as you would have had to have done it to unlock your phone in the first place - Hold down Volume Down and the Power button at the same time).
Step 6
Run the following commands (obviously replace the boot image with the correct magisk image, and use the vbmeta.img you took from the ROM):
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot flash boot magisk_patched-22100_XXXXX.img
Hopefully this will work. But I can't be 100% sure, as the disabling of "verity" could mean that your encrypted user data now can't be read (if you've only just unlocked the bootloader then you're not going to have any data anyway, so not too much of an issue). If this is the case it's likely you'll now need to factory reset the phone. Hold down Volume Up and Power on start to reach the stock recovery menu, and there's a selection for factory reset. You can also install TWRP at this point, and could then use it's factory reset function instead. I downloaded this version of TWRP: https://www.mediafire.com/file/ou8553psro9yyt2/3.4.2_redmi_note_9_5G.rar/file, which came from the other rooting guide (https://unofficialtwrp.com/twrp-3-4-2-root-redmi-note-9-5g-cannon/ - which didn't work). Just flash that version of TWRP to the recovery partition (fastboot flash recovery recovery.img), and ignore all the steps given in the guide it came from.
Let me know how you get on.
Click to expand...
Click to collapse
should I be on the latest version of Miui...12.5 android 11? for me to be able to install twrp. i downgraded back to Miui 12.0.8.0 android 10 as i didnt like my data folder been blocked in android folder. My device is global cannong redmi 9T 5g with diminsity 800u soc, can you please help if you can. thanks in advance
Android 10 is fine. You need to fastboot flash recovery recovery.img
To boot into it you need to turn the phone off, then hold vol up and power until you feel a buzz, then let go.
I have the same Problem as HighEndGamer:
if I enter 'fastboot flash recovery recovery.img', it sayes that everything worked OK in just a few seconds. But nothing realy happend!
If I enter 'fastboot boot recovery.img', phone boot just as normal.
If I enter 'fastboot oem device-info', it sayes "FAILED (remote: unknown command)'.
If I enter 'fastboot oem lock', it works and I have to start from the beginning..
I have MIUI Global 12.0.2.0{QJEEUMX)
chmick said:
sorry for the answer delay.
Adding my 2 cents about unlocking the bootlader .
In order to do it .
FIRST - do not try it from a virtual PC . It does not work (at least it did not work for me)
SECOND , before to run the xiaomi batch_unlock bootlader , don't forget to update google usb drivers
I hard some hard time to just connect the unlocker to my phone . Now i have to wait 167 hours to complete the process .
Click to expand...
Click to collapse
I confirm it does not work from a VM (and the need for latest drivers). There is something funky going on with the USB communication when running from a VM: the first call of the fastboot executable from the windows VM generally works fine, but any other call hang. So the batch_unlock tool cannot work (since it does call fastboot several times).
Had an 11.2.3.3 Global rooted via Magisk OP9 Pro that I wanted to update via OTA to 11.2.4.4, which was offered via system update. I used Magisk to restore images before update, did the update, and then went back to install to inactive slot. Rebooted and it was still on 11.2.3.3 so I tried again. Upon trying again, my phone got to a Qualcomm debug/error mode. I experienced this before when on a different boot slot for some other diagnosis of another issue in the past so I switched boot slots.
The other boot slot is stuck in fastboot mode I come to find so I check what it shows if I reverted back to the other boot slot, which was the Qualcomm error. Now instead of a Qualcomm error, it shows language options, one of which is English, and then gives me "boot reason", "wipe data and cache" and "advanced". I believe this is the OnePlus recovery menu, which I have not needed to use before and in the past, used TWRP on other devices.
Can't I just reflash a whole system image for 11.2.4.4 (it'd have to be the European one right now since Global isn't available) via fastboot and it should be fixed, albeit unrooted and I can just re-root? I'd like to try this, but there's no "flash-all.bat" and I don't know the proper flash order for the Euro images within payload.bin as there's no xml file (I looked up a guide for directions on how to flash without flash-all.bat that I have used on other devices). Oh, and I tried to fastboot a known good boot.img and on one of the slots, it works fine, but still wont boot. The other gives error "FAILED (remote: Failed to load/authenticate boot image: Load Error)". I'm stumped.
Wondering if this has been experienced by anyone else before. Wiping my device is the last resort and shall be avoided at all costs after how much I have configured it to my liking.
I saw the following on another guide:
Code:
fastboot flash boot boot.img
fastboot flash dtbo dtbo.img
fastboot flash modem modem.img
fastboot flash recovery recovery.img
fastboot --disable-verity flash vbmeta vbmeta.img
fastboot --disable-verity flash vbmeta_system vbmeta_system.img
fastboot reboot fastboot
fastboot flash abl abl.img
fastboot flash aop aop.img
fastboot flash bluetooth bluetooth.img
fastboot flash cmnlib cmnlib.img
fastboot flash cmnlib64 cmnlib64.img
fastboot flash devcfg devcfg.img
fastboot flash dsp dsp.img
fastboot flash featenabler featenabler.img
fastboot flash hyp hyp.img
fastboot flash imagefv imagefv.img
fastboot flash keymaster keymaster.img
fastboot flash logo logo.img
fastboot flash mdm_oem_stanvbk mdm_oem_stanvbk.img
fastboot flash multiimgoem multiimgoem.img
fastboot flash odm odm.img
fastboot flash opproduct opproduct.img
fastboot flash qupfw qupfw.img
fastboot flash spunvm spunvm.img
fastboot flash storsec storsec.img
fastboot flash tz tz.img
fastboot flash uefisecapp uefisecapp.img
fastboot flash xbl xbl.img
fastboot flash xbl_config xbl_config.img
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash product product.img
Followed this guide here after extracting the Europe full system image via Payload-dumper and it now boots somewhat, but after it looks like it's loading into OOS and boot is complete, I get a black screen instead of the lock screen. I get charging sounds when plugged into the computer, but just a black screen.
How to Create Fastboot-flashable Factory Image for Any OnePlus Phone
Learn how to create a factory image for any OnePlus phone and flash it using Fastboot. Useful for restoring stock OxygenOS software and unbricking.
www.thecustomdroid.com
Wondering if this has to do with the Europe 11.2.4.4 on my Global device. Going to try reverting to 11.2.2.2 Global full image now.
Geez, good luck
vibrantliker said:
Geez, good luck
Click to expand...
Click to collapse
Just tried flashing the older 11.2.2.2 images one at a time and now it's stuck in recovery...
The closest I can get it to full booting is with 11.2.4.4 Europe full image and I get a black screen only, after it boots up with the OnePlus logo. When plugged in, I get a charging sound every 10-20 seconds or so. Too bad there's no 11.2.4.4 full image for Global or I'd try that.
Also just tried fastboot boot 11.2.4.4_global_boot.img on this 11.2.4.4 Europe image and still no go. Boots and makes sounds, but black screen still.
Have you tried the MSM tool?
hadesflames said:
Have you tried the MSM tool?
Click to expand...
Click to collapse
I was considering it, but don't want to lose any data. Next step is to contact OnePlus technical support during normal hours and see if they can work with me to resolve this one. I believe I read here on XDA that people have contacted them and usually are able to resolve the issue. Trying to avoid clearing data as the device is fine as it boots, but I think the Europe image is conflicting somewhere and not allowing me into the system since it boots all the way to the lock screen, but I don't see a lock screen, just a blank screen with sounds after boot seemingly working, along with charging sounds (albeit, sounding every 10-20s like its periodically charging).
This is so odd though because I did everything as I should've and update seemingly occurred, but system version still showed 11.2.3.3. So I go back to system update and it said there was an issue and to restart again. Did that two times with magisk revert image and restore to inactive and it then stopped booting.
If you're able to get to the recovery you can try sideloading the zip file
ADB Sideload name.zip
That should put the rom back to default, I would reboot the phone back into recovery and then do a wipe or go to fastboot and use "fastboot -w" to wipe the userdata
djsubterrain said:
If you're able to get to the recovery you can try sideloading the zip file
ADB Sideload name.zip
That should put the rom back to default, I would reboot the phone back into recovery and then do a wipe or go to fastboot and use "fastboot -w" to wipe the userdata
Click to expand...
Click to collapse
Does stock recovery support ADB? At 8 pro you needed modified one..
pyry666 said:
Does stock recovery support ADB? At 8 pro you needed modified one..
Click to expand...
Click to collapse
As far as I know, it should do as long as the drivers are installed properly, you can check with "ADB Devices", if you see the number returned then the phone is responding.
As for the fastboot commands above, I know there was a post on the OP7P forum that would make fastboot script packs for each build, if you use the script from those, you should able to amend it to flash the images above. Afaik the structure is likely the same anyway. The post also shows "ADB push" commands you can use to flash individual images to the phone.
I might have a look later and see if I can make a similar one although there seems to be a lot more build versions on the OP9P than there were for the OP7P.
Might just be easier to use the Payload Dumper program to unpack the images from the payload.bin file (instructions here) and then use a generic script to flash them to the phone, all the different models should have similar images although I do know there's an additional India.img for the Indian models (which I think is also shown in the global rom).
djsubterrain said:
As far as I know, it should do as long as the drivers are installed properly, you can check with "ADB Devices", if you see the number returned then the phone is responding.
Click to expand...
Click to collapse
I was just corious, not at home right now so i cant test. My drivers are fine and have no issues..I am using linux myself though
pyry666 said:
I was just corious, not at home right now so i cant test. My drivers are fine and have no issues..I am using linux myself though
Click to expand...
Click to collapse
Yeah I'm working at the moment so not on my own PC, can't really test it out
djsubterrain said:
Yeah I'm working at the moment so not on my own PC, can't really test it out
Click to expand...
Click to collapse
Just tried. ADB with stock recovery is "unauthorized"..So modified is needed if one wants to use stock recovery with adb
djsubterrain said:
As far as I know, it should do as long as the drivers are installed properly, you can check with "ADB Devices", if you see the number returned then the phone is responding.
As for the fastboot commands above, I know there was a post on the OP7P forum that would make fastboot script packs for each build, if you use the script from those, you should able to amend it to flash the images above. Afaik the structure is likely the same anyway. The post also shows "ADB push" commands you can use to flash individual images to the phone.
I might have a look later and see if I can make a similar one although there seems to be a lot more build versions on the OP9P than there were for the OP7P.
Might just be easier to use the Payload Dumper program to unpack the images from the payload.bin file (instructions here) and then use a generic script to flash them to the phone, all the different models should have similar images although I do know there's an additional India.img for the Indian models (which I think is also shown in the global rom).
Click to expand...
Click to collapse
I tried flashing all of the 11.2.4.4 Europe full system image payload_dumper extracted images (such as boot.img, system.img, dtbo.img) to the phone and I get where I am now. It goes through boot, but no lock screen, just a non-lit/black screen with sounds that the phone is charging when plugged in and is recognized by the computer (but can't see internal storage since you have to use notification center to turn on usb storage).
bulletbling said:
I tried flashing all of the 11.2.4.4 Europe full system image payload_dumper extracted images (such as boot.img, system.img, dtbo.img) to the phone and I get where I am now. It goes through boot, but no lock screen, just a non-lit/black screen with sounds that the phone is charging when plugged in and is recognized by the computer (but can't see internal storage since you have to use notification center to turn on usb storage).
Click to expand...
Click to collapse
See if you can do a fastboot -w to wipe the userdata in case it's been left with unusable data.
djsubterrain said:
See if you can do a fastboot -w to wipe the userdata in case it's been left with unusable data.
Click to expand...
Click to collapse
This is what I'm trying to avoid...
Since it mostly boots on the Euro 11.2.4.4, I feel that the Global full image would resolve this, but OnePlus never updates their darn website with the latest for Global.
bulletbling said:
This is what I'm trying to avoid...
Since it mostly boots on the Euro 11.2.4.4, I feel that the Global full image would resolve this, but OnePlus never updates their darn website with the latest for Global.
Click to expand...
Click to collapse
Are there actual hw differences between AA and BA?
bulletbling said:
This is what I'm trying to avoid...
Since it mostly boots on the Euro 11.2.4.4, I feel that the Global full image would resolve this, but OnePlus never updates their darn website with the latest for Global.
Click to expand...
Click to collapse
There's a pinned post at the top of the forum with all the available latest roms. Not sure they've added Global yet tho. Best going there or Oxygen Updater (when the phone is working) than the download page tbh, OnePlus ALWAYS takes ages to add builds there
pyry666 said:
Are there actual hw differences between AA and BA?
Click to expand...
Click to collapse
Not that I know of, but I have seen users use the Europe image to update their device on this forum before with the OP9Pro because they either didn't want to wait or needed to fix their device for whatever reason and the Europe version worked fine. So I don't know if this is different on 11.2.4.4.
bulletbling said:
Not that I know of, but I have seen users use the Europe image to update their device on this forum before with the OP9Pro because they either didn't want to wait or needed to fix their device for whatever reason and the Europe version worked fine. So I don't know if this is different on 11.2.4.4.
Click to expand...
Click to collapse
I know that BA is coming first than AA. Dont know reason for that but with op8p situation was same. Then was talk about googles servers or something but cant remember what that was exactly because it never affected me..
pyry666 said:
I know that BA is coming first than AA. Dont know reason for that but with op8p situation was same. Then was talk about googles servers or something but cant remember what that was exactly because it never affected me..
Click to expand...
Click to collapse
I wish I could go without my phone for weeks until they post the latest firmware to see if that even works, but I can't so I guess I'll have to use the msm tool and wipe all of my internal storage of documents, including taxes, and various files and downloads I've amassed over the past half decade. This really sucks. All because of a simple OTA that should've never caused this. They really should prevent this from being possible with the OTA update tool built-in to their system.
Hello
I've just ordered my Pixel 6 Pro, coming from the OnePlus 8 Pro.
I love tinkering with Root/Kernels/Roms.
So my question is, if there is always a way to get back to stock in case of emergency?
The OnePlus phones are considered as "unbreakable", because You can ALWAYS unbrick it via MSM unbrick tool.
Would be nice to know when I start unlocking the bootloader of my Pixel
Thanks!
Sorry that Pixel doesn't have that unbrick tool ...
The only one is a batch commend file - Flash-All extracted from factory full ROM ...
It is possible to hardbrick a Pixel device without hopes of getting it running again, for example if you nuke your recovery.
Most softbricks can be solved by either doing what Kris Chen suggested, or by using
Android Flash Tool
flash.android.com
or
Google Pixel - Update and Software Repair
After flashing a module that bootloops you can try this:
If it almost boots up but flashes, in a cmd window type:
adb wait-for-device shell magisk --remove-modules
It may grab that and remove all modules. If it doesn't, you can try this:
1. fastboot flash boot boot.img, reboot.
2. long press power button, then long press "power off", click ok to enter safemode.
3. Before your phone boots all the way up, boot to fastboot.
4. fastboot flash boot magisk_patched.img, reboot.
5. In cmd window type: adb wait-for-device shell magisk --remove-modules
6. Your phone will boot up with root and all modules removed.
There's a shortcut to safemode that removes everything but I'm not sure what it is.
Edit: boot.img is taken from the applicable firmware you are on downloaded from Google. Unzip the main zip, go into the folder and unzip the image zip that is inside.
Thank you all for your detailed information, very appreciated
Could someone check if the following is the right procedure to revert to stock kernel?
fastboot flash boot <magisk-patched-image>.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash dtbo dtbo.img
fastboot reboot fastboot (wait a bit, this takes a bit of time until you see the fastbootd screen)
fastboot flash vendor_dlkm vendor_dlkm.img
fastboot reboot
And do I have to do this procedure everytime before switching from a custom kernel to another kernel?
Thanks!
Lycidias said:
Thank you all for your detailed information, very appreciated
Could someone check if the following is the right procedure to revert to stock kernel?
fastboot flash boot <magisk-patched-image>.img
fastboot flash vendor_boot vendor_boot.img
fastboot flash dtbo dtbo.img
fastboot reboot fastboot (wait a bit, this takes a bit of time until you see the fastbootd screen)
fastboot flash vendor_dlkm vendor_dlkm.img
fastboot reboot
And do I have to do this procedure everytime before switching from a custom kernel to another kernel?
Thanks!
Click to expand...
Click to collapse
Yes, correct, and yes, safest to do so each time switching kernels.