Saving a KNOX-tripped Samsung S4 Mini, stuck at Samsung logo, via non-stock-rom? - Galaxy S 4 Mini Q&A, Help & Troubleshooting

My Samsung Galaxy S4 Mini (i9195) went into coma "by itself" (when only charging) one year ago. Since then it is stuck at the white Samsung logo.
KIES can´t get any contact with the phone at all.
When I use Odin to install stock firmware it got stuck on ”aboot.mbn”, and after a minute or two: ”FAIL”. After that the phone doesn´t boot to logo, just says that loading firmware failed, try again, until I load the "pit-file" and the phone boots to Samsung logo again...
Also tried this trick...
[RECOVERY][ROOT] Samsung Galaxy S4 Mini LTE (GT-I9195)
WARNING! ONLY USE THIS ON THE GT-I9195 MODEL! Hello all S4 Mini owners! I'm happy to finally release ClockworkMod recovery and an insecure kernel for the GT-I9195. With these two installed on your device, obtaining root is easy. Attached to...
forum.xda-developers.com
...but it got stuck at "recovery.img", and then "FAIL". but after that experiment (and a new pitfile-loading) the Recovery mode only shows "recovery booting" and "Set Warranty Bit: recovery" but no menu and nothing more happens. I can still use the menu for downloading via Odin. Text in upper left corner:
Odin Mode
Product name: GT-I9195
Current binary: Custom
System status: Official
KNOX Kernel lock: 0x0
KNOX Warranty void: 0x1
CSB-Config-LSB: 0x30
Bootloader AP SWREV: 2
Write protection: Enable
KNOX seems ”tripped” so I guess it´s no longer possible to flash any stock rom:
The flash memory could have died, but even if the phone is nearly nine years old, it is not used much, and I can write at least some bytes to the flash memory.
Is it possible to save a KNOX-tripped phone which gets stuck at Samsung logo via some non-stock-rom? And if so; How?

Related

[Q] S4 mini softbrick problem

To send my phone to warranty ( battery issues), i installed the orginal rom with odin. I reseted the flash counter with Triangle Away. Than i connected my phone to kies for "firmware upgrade and initialization" . ( Than first problem started ) . First it worked smoothly . at 70% of the process its stopped and after waiting 3 hours it didn't worked again . Than i cancelled the process . Kies stoped without any problem. Because of the battery runned low i pluged my phone to charge . After that morning the battery level was still same. It shows it still charges. I tried to turn on my phone but it didn't work. It stays at Samsung Galaxy S4 Mini screen and resets continuouslly . I tried many custom and stock rom but the problem didn't solved. ( Before and after installing Rom i wiped my phone). I can't give my phone to service because i can't reset the flash counter.
Revovery mode and download mode of the phone still works.
Thanks for reading . I really need help .
I'm helpless. Please help me :crying:
Are you sure you have S4 mini? There's no flash counter as far as I remember and Triangle Aways isn't for our phone.
S4 Mini has a KNOX flag (on most) which shows 0x0 or 0x1 - You can't reset that once tripped 0x1 and it voids warranty.
TNCS said:
Are you sure you have S4 mini? There's no flash counter as far as I remember and Triangle Aways isn't for our phone.
S4 Mini has a KNOX flag (on most) which shows 0x0 or 0x1 - You can't reset that once tripped 0x1 and it voids warranty.
Click to expand...
Click to collapse
Yes i am sure. But it resets the flash counter. Ps: it uses another type of kernel

ODIN MODE vs KIES, IS THIS TAB S SM T800 BRICKED?

Hello All-
Things were great and I was getting settled into the new tab when one morning it just crashed.
Todaqy, I am am staring at a screen that says
ODIN MODE
Product Name SM t800
current binary: samsung official
system status: official
Secure Download: enabled
Knox Warranty void:0 (0x0000)
AP swrev: a1
So I think I need to flash this device as it will no boot.
Occasionally I can get it to run the samsung logo, the logo starts flashing , and then the screen goes dark.
Any advice on next steps would be appreciated.
Ed

Samsung galaxy s4 mini GT-I9195I

Hello.
I have a problem... I recently tried to root my samsung. I used odin and all went well. It said that it had succeeded. But my device didn't reboot and is now stuck in a bootloop. I used this root: "https://androidmtk.com/root-samsung-galaxy-s4-mini-gt-i9195"
and now it's saying:
Could not do normal boot
ODIN MODE
Product name: GT-I9195I
Current binary: Custom
System status: official
Reactivation Lock(KK): OFF
Knox Waranty void0x1(4)
Qualcomm Secureboot: Enable (CSB)
RP SWREV: s1, t1, H1, R1, A1, PI
Secure download: enable
and my computer doesn't recognize it, but if i pull out the battery and boot it into ODIN mode it does recognize it.
any suggestions to what may have gone wrong or maybe how to fix it?
Fixed
there is no root for GT-I9195I/samsung galaxy s4 mini plus yet, but there is a recovery file, so if you have problems or you've tried to root with a wrong version i found this link: "http://forum.xda-developers.com/galaxy-s4-mini/development/recovery-cwm-twrp-philz-t3182207" there is also files for GT-I9192I i hope i'm helping someone out there.
There is a way to root on I9195I
http://forum.xda-developers.com/galaxy-s4-mini/general/index-galaxy-s4-mini-i9195i-t3283053
Used this method myself and it works great.
KingRoot latest version + Super Sume work fine, even for the most recent firmware.

Help with S4 mini duos (bricked?) not flashing with odin

Hi there, I found a s4 mini duos i9192 that it's stuck on logo, and when I try to flash it with odin it gets stuck on "initializing" and doesn't flash at all, not roms or recovery. Also I can't get in recovery, by pressing power + vol up + home button all I get is vibration.
When I enter download mode I see this:
ODIN MODE
Product name: GT-I9192
Current Binary: Samsung Official
System Status: Official
Knox Kernel Lock: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Bootloader Ap Swaev: 2
Write Protection: Enable
According to Kies it was running on I9192UBUCOI2_I9192UUBCOC1_I9192UBUCOI2 (TTT) so I tried to flash that one, along with many others, still the same. Tried with other usb ports, other cables, another pc running a different version of windows, still the same, odin does nothing. Any help?
Thanks in advance.
i got it too but probably emmc is damaged or you have messed up with partitions

[I9195] Need a working Debrick Image (Phone Hard bricked)

Hello,
i need a working debrick.img because my phone is bricked after a update for Google Chrome. I have tried 8 different Images but nothing works. It comes "WRITE 39008 SECTORS" and then the device stuck in a reboot loop. No Samsung Logo, no DLOAD mode, no recovery.
What can i do now?
Samsung Galaxy S4 Mjni GT-I9195 Black Edition
Android 4.4.2 DBT Stock (no root, ...)
Knox 0x1
Thanks in advance
I need that too. Have you found nothing?

Categories

Resources