I tried to extract tot file.(itis lg flash tool tot)
It was impossible to extract it into partitions.
I tried lgunpack tool but doesn't work....
Is there any other ways to do this.
My device is f240L
I want to make qpst file to unbrick hard brick.
But it was impossible for me to find any other ways to get
partiton files(mbn)
Is there any other ways to get mbn files?
My device(Nubia z11 minis) is hard bricked, i think its a dead bootloader, my computer detects device at 9008(old I think) port no partition of device is visible. I tried Qfil and Nubia studio tool both fail with error Qfil gave me Sahara error couldn't communicate with flash programmer
While Nubia tool gave me file not found error. I need help to fix.
Device has no led
Does anybody here knows about MPRG8953.Mbn
And 8953_msimage.mbn
Nikhil Joshi said:
My device(Nubia z11 minis) is hard bricked, i think its a dead bootloader, my computer detects device at 9008(old I think) port no partition of device is visible. I tried Qfil and Nubia studio tool both fail with error Qfil gave me Sahara error couldn't communicate with flash programmer
While Nubia tool gave me file not found error. I need help to fix.
Device has no led
Click to expand...
Click to collapse
Ok. Folder with raw image (where is rawprogram abd mbn file) should be in root of c: partition.
Also, try miflash if qfil fails
Already tried it's no use
Found a solution but i need two file MPRG8953.mbn and 8953_msimage.mbn
https://gizchina.it/2017/01/nubia-z11-mini-s-unbrick-nubia-studio-tool/
Послато са NX549J уз помоћ Тапатока
Nikhil Joshi said:
Found a solution but i need two file MPRG8953.mbn and 8953_msimage.mbn
Click to expand...
Click to collapse
i want it too.
Anyone try this link?
China or Global ROM?
https://drive.google.com/file/d/1uBnrVo_TfIa8iUWrDGr7j90SojFEs-4z/view
and
https://drive.google.com/file/d/1wM1ymz9CRArNcmqaIjlVZbrWOlis0VqJ/view
My phone is blinking when connected to my system, but no display, no recovery mode.. its just blink.. none of the side keys responded to boot menus/ fastboot menus..
i followed instructions, its getting patched through qfil tool, but still the same problem. phone is not booting to normal.
any clue will help to recovey my phone...
I appreciate all of your kind helps.
I am having the BRICK problem with LG G Pro e98820c after flashing wrong rom and unplug USB during flashing process.
Now the phone is stuck at Brick qualcomm hs-usb qdloader 9008 mode. I have some tools such as Smart diagnosis tool, BoardDiag, Androidbrick, Qfil/QPST ....But I have no proper guide how to use them to unbrick qualcomm hs-usb qdloader 9008 mode.
Have you got a solution for your brick phone.
I got LG optimus G Pro e98820c bricked during flashing a kdz update. I tried to upgrade a lollipop 5.0.2 rom of korean variant F240L model. The phone has long released and used.
This is how things went wrong:
I flashed the rom, but stuck at download with no booting, then unplugged USB, then and there it went bricked.
No battery light
No download mode......Now it is totally DEAD
Luckily, when it is plugged on Windows 8, the device manager shows Qualcomm HS-USB QDloader 9008(COM15). Is this sign of the phone going back to life? How should I step forward to get back Download Mode?
I tried to test and unbrick it on BoardDiag, but it shows ...
#[ G-pro (APQ8064)]
============= AP CHECK START
Failed during loading flash programmer
TEST aborted!!
Elapsed Time: 0 hours 0 minutes 0 seconds#
This is the message I got from BroadDiag. but since there is no .TOT firmware for G Pro e988C, I think I can not do image extraction from .KDZ firmware. Is that right way to do image extraction from .KDZ firmware zip? I have a problem with no partition .txt file available from extraction of KDZ zip. How can i get partition .txt ?
There are KDZextractor, Can I use them? Can these image extracted from KDZ be applied in BoardDiag?
All of your answers is highly appreciated.
Sho Thant
Mandalay, Myanmar . Tech Savvy.
TOT is only for E980 AT&T variant. E988 uses KDZ. Try with BordDiag then, but I'm not sure it will work. There are some guides here in G Pro forums, but never had to use them because mine never bricked that bad. If nothing works, JTAG/repair.
ShadySquirrel said:
TOT is only for E980 AT&T variant. E988 uses KDZ. Try with BordDiag then, but I'm not sure it will work. There are some guides here in G Pro forums, but never had to use them because mine never bricked that bad. If nothing works, JTAG/repair.
Click to expand...
Click to collapse
Dear Shady Squirrel,
I have tried BoardDiag, but it keeps giving the following message:
#[ G-pro (APQ8064)]
============= AP CHECK START
Failed during loading flash programmer
TEST aborted!!
Elapsed Time: 0 hours 0 minutes 0 seconds#
I am stuck at this stage. But maybe I have no proper way of using BoardDiag.
In the instruction from the forum, the extracted files needed are ( .mbn ) file not ( .bin ) file which are extracted from KDZ.
Can you help me instruct for BoardDiag tool?
Thank a lot in advance.
Sho Thant
Sho Thant said:
Dear Shady Squirrel,
I have tried BoardDiag, but it keeps giving the following message:
#[ G-pro (APQ8064)]
============= AP CHECK START
Failed during loading flash programmer
TEST aborted!!
Elapsed Time: 0 hours 0 minutes 0 seconds#
I am stuck at this stage. But maybe I have no proper way of using BoardDiag.
In the instruction from the forum, the extracted files needed are ( .mbn ) file not ( .bin ) file which are extracted from KDZ.
Can you help me instruct for BoardDiag tool?
Thank a lot in advance.
Sho Thant
Click to expand...
Click to collapse
Never used it - my worst brick was solved by putting device in download mode and doing a full stock reflash. Haven't managed to mess-up bootloader for 3ys I've used G Pro. Try running app as admin, KDZ should work, it's valid image - people are just referencing to tot files because they are all copy/pasting same tutorial around the webs.
In the end, it would be much smarter to just send it to service...
ShadySquirrel said:
Never used it - my worst brick was solved by putting device in download mode and doing a full stock reflash. Haven't managed to mess-up bootloader for 3ys I've used G Pro. Try running app as admin, KDZ should work, it's valid image - people are just referencing to tot files because they are all copy/pasting same tutorial around the webs.
In the end, it would be much smarter to just send it to service...
Click to expand...
Click to collapse
Thanks for your kind advice, anyway I will give it a one last try with the extracted images from KDZ on BoardDiag.
If it does not turn up good, better send it to service center.
Sho Thant
Hello guys, i got an LG G Pro Lite D681 that i failed to flash with LG Flash Tool 2014, and now the phone is dead and doesn't even vibrate or react if i press any key, BUT if i plug it in to the computer, the Device Manager recognizes it as MTK USB Port (COM3).
I don't think the device is completely dead, right? but i can't enter download mode so i can't use LG Flash Tool again.
1st: I have two firmwares:
LG_D681_V10A_00 and LG_D681_V20A_00
I've been trying to get the content of both in order to try to flash the images with SP Flash Tool v5.1524.00.000. The only tool that accepts the .kdz is LGExtract 0.2.1 by navossoc, all i get is:
LGD681AT-00-V20a-AMX-XXX-NOV-18-2014+0.bin
LGUP_MT6577.dll
Then i tried to extract LGD681AT-00-V20a-AMX-XXX-NOV-18-2014+0.bin with BinExtractor but i get this error:
Code:
Reading AP Header...
Failed Reading APHeader!
Reading GPT Header...
Does not contain GPT at first data block
Writing Files...
Finished
What am i doing wrong? What should i try to get the partitions and files needed to debrick? I've read a couple of tutorials but i can't do anything at this point
Thanks a lot in advance! :fingers-crossed:
Hello everyone, I'm new on the forum. Sorry to bother you, I've been reading most of the threads about the G8 thinq. My problem is that I can't extract LG's kdz firmware properly. I already tried with the Lg extract, with the CMD, with Power Shill. None manage to extract the '.DZ' Please share me a rom that is already extracted, thanks in advance.
CloudStrife97 said:
Hello everyone, I'm new on the forum. Sorry to bother you, I've been reading most of the threads about the G8 thinq. My problem is that I can't extract LG's kdz firmware properly. I already tried with the Lg extract, with the CMD, with Power Shill. None manage to extract the '.DZ' Please share me a rom that is already extracted, thanks in advance.
Click to expand...
Click to collapse
So a couple of things, the kdz extractor tools are plentiful, some work under windows and some under linux. I've used the linux version and it does work, no issues. The DZ file is basically the KDZ uncompressed. It's a large single file.
The DZ is then further broken down by the utility into various forms due to the command you use, you can get partition images and chunks of images etc etc.
2nd, you ask for a 'rom that is already extracted'? That's a lot of images, about 5 gig worth, what **exactly** are you trying to do? Maybe you only need a few files? Maybe you need files from a specific rom version? Maybe you need a kdz rom that doesn't even exist? Like at&t and sprint?
you might want to fill in some details for anyone to help.
AsItLies said:
So a couple of things, the kdz extractor tools are plentiful, some work under windows and some under linux. I've used the linux version and it does work, no issues. The DZ file is basically the KDZ uncompressed. It's a large single file.
The DZ is then further broken down by the utility into various forms due to the command you use, you can get partition images and chunks of images etc etc.
2nd, you ask for a 'rom that is already extracted'? That's a lot of images, about 5 gig worth, what **exactly** are you trying to do? Maybe you only need a few files? Maybe you need files from a specific rom version? Maybe you need a kdz rom that doesn't even exist? Like at&t and sprint?
you might want to fill in some details for anyone to help.
Click to expand...
Click to collapse
Hello, thanks for answering. I will begin to tell my story. I have an Lg G8 ThinQ Sprint with Android 10. It is network unlocked because I can use it here in Honduras. I did the Crossflash tutorial ( https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/ )
While using the QFIL I deleted flash from one of the 7 partitions the tutorial says. My phone no longer exits EDL mode ( Qualcomm HS-USB QDloader 9008 (COM5)) So I went to this tutorial: (https://forum.xda-developers.com/t/lg-g8-stuck-in-qualcomm-hs-usm-qdloader-9008.4050197/).
I followed the steps to load the ¨Lun¨, I did it in PowerShell, because in CMD it didn't work for me. Apparently the ¨Lun¨ were installed well. Now the problem is that I can't install the necessary partitions, because I can't unzip the .DZ ROM
Help, what do I do? My cell phone is only in Qualcomm HS-USB QDloader 9008 mode, it does not go to download mode
CloudStrife97 said:
Hello, thanks for answering. I will begin to tell my story. I have an Lg G8 ThinQ Sprint with Android 10. It is network unlocked because I can use it here in Honduras. I did the Crossflash tutorial ( https://forum.xda-developers.com/t/tutorial-crossflash-bypass-opid-mismatched-error.4345963/ )
While using the QFIL I deleted flash from one of the 7 partitions the tutorial says. My phone no longer exits EDL mode ( Qualcomm HS-USB QDloader 9008 (COM5)) So I went to this tutorial: (https://forum.xda-developers.com/t/lg-g8-stuck-in-qualcomm-hs-usm-qdloader-9008.4050197/).
I followed the steps to load the ¨Lun¨, I did it in PowerShell, because in CMD it didn't work for me. Apparently the ¨Lun¨ were installed well. Now the problem is that I can't install the necessary partitions, because I can't unzip the .DZ ROM
Help, what do I do? My cell phone is only in Qualcomm HS-USB QDloader 9008 mode, it does not go to download mode
Click to expand...
Click to collapse
So honestly I'm confused by where you are or what the situation is. But no matter.
This link is for the Lun4 partitions of sprint a10 backup. It has the rawprogram xml needed to flash it.
My understanding is that should be all you need to get LGUP to work. So flash that with qfil and then go directly to LGUP with the key combo.
Then, in lgup, do whatever you want, crossflash etc. Once you reinstall a kdz with lgup you should be back to the beginning and can start again.
good luck
AsItLies said:
So honestly I'm confused by where you are or what the situation is. But no matter.
This link is for the Lun4 partitions of sprint a10 backup. It has the rawprogram xml needed to flash it.
My understanding is that should be all you need to get LGUP to work. So flash that with qfil and then go directly to LGUP with the key combo.
Then, in lgup, do whatever you want, crossflash etc. Once you reinstall a kdz with lgup you should be back to the beginning and can start again.
good luck
Click to expand...
Click to collapse
Thanks for the files and information. I just did the flash in QFIL. look what it tells me.
What could be wrong with my cell phone? It no longer wants to enter power on or enter download mode.
The screenshots from 1 to 5 are those of the QFIL flash process.
Then see how is the partition manager. From screenshot 6 to 13.
Do you find any problem?
I still can access Download mode.
Thank you again for your dedication and availability to help me
Hmmm, wasn't sure if that would work or not. That rawprogram xml was created with bkerler edl utilities, I know it can be used to restore with those utilities but thought it would work with qfil, guess not.
seems your only other option would be to flash ea partition manually with qfil.
AsItLies said:
Hmmm, wasn't sure if that would work or not. That rawprogram xml was created with bkerler edl utilities, I know it can be used to restore with those utilities but thought it would work with qfil, guess not.
seems your only other option would be to flash ea partition manually with qfil.
Click to expand...
Click to collapse
ok i'll try it that way.
how can i use bkerler edl utilities to load the rawprogram xml ?
Hi, I also tried this tutorial:https://forum.xda-developers.com/t/tutorial-rescue-from-hard-brick.4351389/.
According to him, since my device is Sprint, I have to flash all partitions. You can successfully do part C. But I haven't been able to do part E yet because I don't have all those partitions.
AsItLiesshare me the full firmware backup so I can restore mine, please
CloudStrife97 said:
AsItLiesshare me the full firmware backup so I can restore mine, please
Click to expand...
Click to collapse
I don't have the full backup, sorry. Pretty sure if you look though someone has posted a link to it.
Keep in mind though, if you have chip erased your device, restoring a backup will not restore your imei, for that it will cost $ to pay someone with an octoplus box to do it.
AsItLies said:
So honestly I'm confused by where you are or what the situation is. But no matter.
This link is for the Lun4 partitions of sprint a10 backup. It has the rawprogram xml needed to flash it.
My understanding is that should be all you need to get LGUP to work. So flash that with qfil and then go directly to LGUP with the key combo.
Then, in lgup, do whatever you want, crossflash etc. Once you reinstall a kdz with lgup you should be back to the beginning and can start again.
good luck
Click to expand...
Click to collapse
Do you have an AT&T one?
PHANX0M said:
Do you have an AT&T one?
Click to expand...
Click to collapse
no
My device stuck in edl mode it's nothing show no download mode no restart no turn off only edl mode please help