Question Stock on loading screen factory locked - Bricked - can any data be saved at this point? - Moto E (2020)

Hey folx, you seem to be my only hope!
My stock Android factory locked Moto got out of sudden into a loading screen loop. I learned it got bricked without me even trying to anything at all to the phone. Problem is that I cannot do a factory reset as there is lot of important unbacked up data. Unfortunately USB debugging is disabled and I cannot even load up recovery mode. The only place I can go to is fastboot, but I cannot use ADB.
Is there any slightest chance my data can still be saved somehow? Tried Googling up all day, but would not find a solution to the problem. Have no idea that a stock android phone can generate a load loop. I am pretty desperate. Please help!
Thanks
Six

I have a similar problem. Did you find a fix or solution? Please share, I'm pretty desparate too

I'm in the same boat, I used orange fox's bootloader by accident, switched slots and now Im stuck on the fallback bootloader

Guys even I have the same problem I can't even boot into fastboot or recovery mode. Oh and USB Debugging is off and Bootloader is Locked. Pls help

Sanju Kariyattil said:
Guys even I have the same problem I can't even boot into fastboot or recovery mode. Oh and USB Debugging is off and Bootloader is Locked. Pls help
Click to expand...
Click to collapse
Use a blank flash

Related

Desperate Help Needed!

So I am the proud owner of a shiny, new Galaxy Nexus (GSM). Unlocked the bootloader and installed CWM recovery and was doing great. Today I decided to install the volume fix. Installed the zip through recovery, completed and rebooted. The phone got stuck in a bootloop over and over and over and over and would not boot Android at all. Did a ton of research here and everywhere and, in a panic, I booted into CWM recovery, reset the cache & did a full factory reset. NOW, the phone will not go past the Google bootscreen with the unlock symbol, no matter what I do. AND, I can't even flash the original google image because I can't get in to set USB debugging so my computer won't even recognize the phone (FYI, I'm on a Mac). I am at a complete loss and don't know what to do. If I could only get the computer to recognize the phone I could flash the original google image through Terminal, but alas, I can't. Any ideas? If I can somehow get this phone back up and running I would be eternally grateful. For now, I think I may be SOL. Thanks....
This happened to me, I was not able to solve the issue, even though I could push and pull data to and from the device via ADB. I could still not get past the google logo. I decided to lock the boot loader again and return to the store for a new device.
http://groups.google.com/group/android-building/msg/2cd2b16ed56a7e84
Sent from my Galaxy Nexus using XDA App
hartford said:
So I am the proud owner of a shiny, new Galaxy Nexus (GSM). Unlocked the bootloader and installed CWM recovery and was doing great. Today I decided to install the volume fix. Installed the zip through recovery, completed and rebooted. The phone got stuck in a bootloop over and over and over and over and would not boot Android at all. Did a ton of research here and everywhere and, in a panic, I booted into CWM recovery, reset the cache & did a full factory reset. NOW, the phone will not go past the Google bootscreen with the unlock symbol, no matter what I do. AND, I can't even flash the original google image because I can't get in to set USB debugging so my computer won't even recognize the phone (FYI, I'm on a Mac). I am at a complete loss and don't know what to do. If I could only get the computer to recognize the phone I could flash the original google image through Terminal, but alas, I can't. Any ideas? If I can somehow get this phone back up and running I would be eternally grateful. For now, I think I may be SOL. Thanks....
Click to expand...
Click to collapse
One more post like this in Dev section and you'll be banned for 3 weeks

Galaxy Nexus stuck on Google logo boot loop help [GSM]

I am running the stock rom without root and unlock and I got the 4.0.2 OTA update 3 days ago. Today when I do the pattern unlock my phone froze and reboot. Now I cannot get pass the Google logo boot screen.
I am able to get into the recovery mode but I don't want to do a factory restore as I don't have anything backup yet.
Is there any solution to this boot loop problem? I am surprise that I am getting this problem as I am running the stock rom without any root / mod.
If there is no solution to this, is there any way I can backup my phone before doing the factory restore?
Many thanks!
You can back up via adb. Try searching in the General threads, since there's a long topic on this...
Good luck!
Thanks, I do find information about backup, but I can't find anything regarding the bootloop...
When i got stuck at the Google screen with a bootloop i booted into the bootloader/fastboot screen with vol up+down power and i redid the one click all process and it basically rewiped my device and put it back to working again with unlocked bootloader rooted etc....
All you have to remember is what build number you have and let the toolkit work its magic.
tigersgt said:
Thanks, I do find information about backup, but I can't find anything regarding the bootloop...
Click to expand...
Click to collapse
Sorry, forgot to mention. You're probably gonna have to wipe via recovery - which is why I pointed you to a back up...
danger-rat said:
Sorry, forgot to mention. You're probably gonna have to wipe via recovery - which is why I pointed you to a back up...
Click to expand...
Click to collapse
I can't find a way to backup without going into Android. I can only go to Fastboot Mode.
Anyone know how to backup the file using abd without getting into android?
Why did make 2 threads about this. Unlock the boot loader and use adb to flash your stock. Image files. You will loose all data unfortunately but I think that's the only way to fix it.
Sent from my Galaxy Nexus using xda premium
Ok I'm stuck with the same problem now. I wanted to flash a ROM, so I downloaded AOKP, flashed it and rebooted and the phone refuses to boot past the Google logo and keeps rebooting again and again. I am able to get into the recovery. I have flashed the ROM several times and its still the same. I have done a complete wipe as well. Still no go.
Fastboot command doesnt work in the bootloader either. I have made sure the drivers are installed, still there is nothing when I type fastboot devices. If I type any fastboot command it just says <waiting for device> or something like that.
Any other suggestions? :-s

Soft bricked zenfone 2. Need help. Need USB Debugging

I have a rooted zenfone 2. I checked for an update. Not knowing the risks of updating system while rooted, I installed the update, and now my phone is stuck on the boot animation screen. It is stuck on "Asus In search of incredible" screen with the turning gear. I can access fast boot mode and recovery mode, but can't start the phone. My phone has Android system recovery installed, not ClockworkMod or TWRP. I tried to install a different recovery, but my PC doesn't read the phone. I thought that wiping the data and cache will help, but didn't. Help me. I'm a 15 year old noob. My parents will kill me!! Also, I haven't tried to install any ROM's on it. So that's out of the picture.
And neither adb, not fastboot can detect the phone.
My phone is rooted, but the bootloader is not unlocked. I was going to unlock it, but thought of backing data up first. I was trying to find the backup app, but accidentally tapped on system update app. I thought there wouldn't be any harm in checking for an update... Apparently their was a lot of harm.
I also tried installing twrp recovery, but it gets stuck on "Waiting for device"
I'm in dire need of help.
I just need to find a way to switch USB debugging on...... That'll fix all my problems
thanks in advance.
I have the Z008 model, NOT the Z00A.
mudit99 said:
I have a rooted zenfone 2. I checked for an update. Not knowing the risks of updating system while rooted, I installed the update, and now my phone is stuck on the boot animation screen. It is stuck on "Asus In search of incredible" screen with the turning gear. I can access fast boot mode and recovery mode, but can't start the phone. My phone has Android system recovery installed, not ClockworkMod or TWRP. I tried to install a different recovery, but my PC doesn't read the phone. I thought that wiping the data and cache will help, but didn't. Help me. I'm a 15 year old noob. My parents will kill me!! Also, I haven't tried to install any ROM's on it. So that's out of the picture.
And neither adb, not fastboot can detect the phone.
My phone is rooted, but the bootloader is not unlocked. I was going to unlock it, but thought of backing data up first. I was trying to find the backup app, but accidentally tapped on system update app. I thought there wouldn't be any harm in checking for an update... Apparently their was a lot of harm.
I also tried installing twrp recovery, but it gets stuck on "Waiting for device"
I'm in dire need of help.
I just need to find a way to switch USB debugging on...... That'll fix all my problems
thanks in advance.
I have the Z008 model, NOT the Z00A.
Click to expand...
Click to collapse
Hey there!, have you fixed it yet? I'm having the same problem i'm trying this method wwwdottechmestodotcom/recover-bricked-asus-zenfone-2/
Maybe u need to look at this post
http://forum.xda-developers.com/zenfone2/general/guide-recover-fastboot-bricked-zenfone-t3284337
hope it will help u.

Bootloop after Installing Nethunter 2.0 (Nexus 7 2013 Wifi)

Hello everybody,
i hope the xdadevs can help me with my problem.
Since two Days i try to recover my Nexus 7 form a bootloop.
A week ago i flashed Kali Nethunter 2.0 via TWRP on my Device (Nexus 7 2003 Wifi) - Everything worked fine till yesterday.
My device run out of energy so i loaded it and startet it shortly after that.
Then i regognized the bootloop. I tried to restart the device but it had no effect.
After that i tried to boot into the Recovery Mode with TWRP to restore my working backup. But it got stucked on the loading screen of TWRP too.
Now i tried to recover some images and fix the problem with some manuals which seemed promising. - no success
After a while i did something incredible stupid and locked my bootloader again (i wanted to try to lock and unlock it since some tools couldnt flash the stock rom).
The situation right now:
I cant boot up normaly: Stuck while "Google" is displayed
I cant boot in Recovery Mode (TWRP): Stuck on the blue TWRP Logo
If i try to use the Skipsoft Toolkit or something else it fails - or do i miss something
Recover the Stock rom by using the "flash-all.bat" fails because of this (pastebin. c0m/ie0dBv1D). I used the stock rom of Android 4.4.4(razor-ktu84p) because every other stockrom says this (pastebin. c0m/Dz31k8qu).
I wonder why the stock rom needs to get the bootloader unlocked... ive red so much about it that it just works out of the box..... am i doing something wrong ?
If i try to unlock again, the selection screen on the tablet shows up. I choose yes and hit the Power button. At the console the output <bootloader> erasing userdata" shows up and "freezes?!"... nothing happens afterwards.
Thats about it and this is where i am stuck. I would really appreciate if someone could help me ! I would even reward or spend some money on help.
I try to fix it meanwhile and update this post if something new happens.
I had to alternate the links because im a new member, im sorry for that !
Thanks in advanced and sorry for the spelling
did you try the nexus root toolkit ?
war your PC detecting (USB) the Nexus prior to this problem?
diehard2013 said:
did you try the nexus root toolkit ?
war your PC detecting (USB) the Nexus prior to this problem?
Click to expand...
Click to collapse
Yeah i tried it but it couldnt fix my problems. Returning to Stock Rom will always tell me that i need the bootloader unlocked... and i cant unlock it.
My PC and Linux Notebook where recognizing before it was bricked. Now it only gets detected in fastboot because it wont start anymore.

Android 11 Beta 2 Stuck! HELP

Hey! Need a little help. I updated to Android 11 Beta 2. Now my phone is stuck on a boot loop. A li'l different though, phone boots up normally and stays on the lockscreen and alive. Can receive calls. But once I unlock with the pattern it shows ' Phone is starting' works for a good 2 seconds and then ends up on infinite bootloop until I Power down. How do I access my files on PC ? If I can get just few files out of it then maybe I can perform a factory reset . Please HELP!
kkrazzyyguy said:
Hey! Need a little help. I updated to Android 11 Beta 2. Now my phone is stuck on a boot loop. A li'l different though, phone boots up normally and stays on the lockscreen and alive. Can receive calls. But once I unlock with the pattern it shows ' Phone is starting' works for a good 2 seconds and then ends up on infinite bootloop until I Power down. How do I access my files on PC ? If I can get just few files out of it then maybe I can perform a factory reset . Please HELP!
Click to expand...
Click to collapse
some older app is causing the loop you mayneed to factory reset through recovery or flash factory images to ur devices ,( please backup your all data and i will advice you to remove the screen lock if possible as it may cause issues after flashing older or newer images
That's what I am asking. How do I backup?
kkrazzyyguy said:
That's what I am asking. How do I backup?
Click to expand...
Click to collapse
I use this tool in my computer to update my phone.
Make sure to follow and read the instructions.
Since you're phone is in boot loop, put your phone in into bootloader
https://flash.android.com/welcome?continue=/custom
Facing the same trouble, did it help?
Hi, I finally managed to solve this!! Was able to get the phone working with data intact.
So I got exactly the same problem yesterday and was looking around for a solution when I bumped on this thread, the solution suggested to use Android Flash Tool can work only if the bootloader is already unlocked, USB debugging is on and you edit the flash.bat file to remove -w from the command line, which would not work in my case since my bootloader is locked and unlocking through ADB would wipe all data
So the only good solution is to do an OTA UPDATE USING ADB SIDELOAD, I just downloaded the OTA file, connected the phone to computer, booted into recovery and used ADB to sideload the OTA and boom, the phone is its pristine self again, with ALL DATA intact

Categories

Resources