Related
So someone flashed this new rom? What changes? I translated from china lumia 900's forum, here results.
1 used the State Bank 2175.2905.8858.12480 version as mastering.
The 2. Transplantation Lumia900 latest 2175.2907.8858.13030OEM.
3. Latest FULLUNLOCK V4 unlock procedure.
4. Using latest unlocking supporting software the Root rights management, gravity sensor, XAP deployment, file management, WM Device Center, the search key settings and Quick Start 7 software, and all models have added language to facilitate domestic players to use.
5. Supports XBOX game support IE deploy, support for unlimited XAP deployment of PC.
6. Delete multiple languages, or English only reserved yet.
Other registry optimization, debug mode, the default time zone correction.
If you deploy third-party software requires full unlock permission, be sure to set it as a trusted Root rights management, or it may not work properly, no matter what the time, Root permissions to manage the software, you can not delete, or may some other unknown problems. The first time after the start of the Brush to wait a minute or a the Welcome Message pop-up in use. Remember! ! !
http://translate.google.com/translate?hl=ru&sl=auto&tl=en&u=http%3A%2F%2Fwww.wpxap.com%2Fthread-564190-1-1.html
http://www.wpxap.com/thread-564190-1-1.html
2907 is MX (Mexico?) country variant. Anyway works fine for me, better than 2905. Faster and more stable.
2175.2907.8858.13030
wow that's great! downloading!!!!!!!!!!! :fingers-crossed:
Hi there,
can you tell me what's the difference between 12480 and 13030 firmware?
In my custom rom i used the 12480 because it's the latest offical rom for all countrys...
13030 is only for Mexico?
Any recommendations?
Ok, somebody help me out here. I might be stupid. NaviFirm doesn't show this ROM for me. Is there a downloas link on the chinese web page somewhere that I cannot seem to find?
Even the Mecixo one has all languages in.
Over the past few days, I have been working on a new version of Seven-Eighter based off of the source code that Jaxbot kindly provided. I have made numerous improvements to the original version.
One of those improvements is instead of embedding the links to the update files as strings in the actual program, my version of Seven-Eighter downloads a config file from the internet which contains the links to the update files. In this manner, you, the user, do not have to download a new version of the program every time Microsoft releases a new update for Windows Phone 7.x. All I have to do on my end when a new update comes out is to just update the config file once I find links for the new update.
Some more improvements include improved error handling and some better instruction to help you with the update process. If you haven't yet, you should really check it out. I am curious as to what people think of my version compared to the original.
You can find the link to download my version of Seven-Eighter on my blog here: http://bit.ly/ZOzAz9
Now as such, I am always looking to improve. I welcome any and all suggestions. If you want to throw something my way to help with development you are welcome to do so, but not required (your satisfaction works just as well, check my signature for instructions).
Nice work!
Steven855 said:
Over the past few days, I have been working on a new version of Seven-Eighter based off of the source code that Jaxbot kindly provided. I have made numerous improvements to the original version.
One of those improvements is instead of embedding the links to the update files as strings in the actual program, my version of Seven-Eighter downloads a config file from the internet which contains the links to the update files. In this manner, you, the user, do not have to download a new version of the program every time Microsoft releases a new update for Windows Phone 7.x. All I have to do on my end when a new update comes out is to just update the config file once I find links for the new update.
Some more improvements include improved error handling and some better instruction to help you with the update process. If you haven't yet, you should really check it out. I am curious as to what people think of my version compared to the original.
You can find the link to download my version of Seven-Eighter on my blog here: http://bit.ly/ZOzAz9
Now as such, I am always looking to improve. I welcome any and all suggestions. If you want to throw something my way to help with development you are welcome to do so, but not required (your satisfaction works just as well, check my signature for instructions).
Click to expand...
Click to collapse
hi, for htc mozart with dynamic v2.0 rom doesn't work.
Do you know how I can update my phone?
Thanks
ruso said:
hi, for htc mozart with dynamic v2.0 rom doesn't work.
Do you know how I can update my phone?
Thanks
Click to expand...
Click to collapse
To be honest, I didn't test my version of Seven-Eighter with a custom rom image (only stock factory rom image). What build is it currently running?
I have the exact same question.
I pretty much bricked by bootlaoder on my AT&T HD7S using the initial version of SevenEighter from jaxbot and now can't even use the gold card method to downgrade since I need it unlocked.
My RGB bootloader screen only shows one line of text at the top in the red and nothing in the white space where it should say USB HOST/Loader Mode.
But at least I had a 7.5 Zune backup that I can restore to, the only thing being that it doesn't restore my bootloader.
So, question is, can I use your software to upgrade to a custom unlocked 7.8?
Thank you!
I was finally able to get my Focus S upgraded to 7.8. Got tired of waiting. I had a problem with the application and had to close it. when I relaunched, it continues where it left off. Nice! I left the update.log just in case.
Now I just need to unlock it for side loading. Anyone recommend ways that still work? Thanks.
Will
Steven855 said:
Over the past few days, I have been working on a new version of Seven-Eighter based off of the source code that Jaxbot kindly provided. I have made numerous improvements to the original version.
...
You can find the link to download my version of Seven-Eighter on my blog here: http://bit.ly/ZOzAz9
Now as such, I am always looking to improve. I welcome any and all suggestions. If you want to throw something my way to help with development you are welcome to do so, but not required (your satisfaction works just as well, check my signature for instructions).
Click to expand...
Click to collapse
Screenshot please ?
anybody updated at&t titan 2 to 7.8?
Yes. The seveneighter app worked perfectly. I just wish I could install the version of htc connection setup I had on my hd2 so I could change my apn settings for my carrier instead of being locked out of my mms.
I've only just had my new 64GB RT.
I'm in the UK and want to install the 8.1 beta version. I have read lots on how's it not available in the UK as of yet. Can anyone tell me if it's possible and the difficulties in getting this beta onto my device.
Thanks
It can be done apparently. You would need to change some registry keys so your device identifies as EN-US, install the EN-US language pack, install 8.1, then install EN-GB ontop of that again unless your alright with things being spelt wrong.
Thanks for that. It seems a bit long winded, I may just wait until MS release a beta for us in the UK, which hopefully they will some time soon.
potsykate said:
Thanks for that. It seems a bit long winded, I may just wait until MS release a beta for us in the UK, which hopefully they will some time soon.
Click to expand...
Click to collapse
It's easy enough to do, but you need to change the install language registry key (not whatever language/region etc you have it "set" to - it's the original install language) to one of the supported languages, download the hotfix that activates the ability to install the update, then install it.
From memory, the key to change is HKLM\System\ControlSet001\Control\Nls\Language\InstallLanguage
Microsoft advice on the various TechNet threads I've read is not to do it.
Thanks for the replies, is there any specific reason that we in the UK are not included in the 8.1 beta versions. Is there any chance that we may soon?
I managed to install 8.1 (UK) after Tuesdays updates by just going to windows.microsoft.com/en-gb/windows-8/preview on the Surface.
I tried when 8.1 first became available and it was not working due to the English(US) language being the only English language covered initially.
It may of been a fault but it installed absolutely fine and then let me download the update from the store. Though, I've just gone back to 8 this morning as it's a tad buggy at the moment (some apps showing updates when there isn't any, apps crashing like Photos and News and some just not working properly like Reader).
Uk is now officially allowed to update to 8.1. No language tweaks or hacks necessary.
I finally did it last night but didn't do a back up as I couldn't find a thumb drive. So I guess I'm on it until the final comes out later in the year.
I haven't had time to play yet as it was very late in the night, so in a nutshell what are the differences in 8.1?
Thanks
If you need to go back to 8 then I have recoveries available..
As for the differences, I wouldnt worry about them, not much point in telling you things you dont have and havent seen, just know that 8.1 is better
Hello
Anyone having trouble installing Netflix on a rooted US AFTV from an Amazon.co.uk account? It downloads just fine but then says "Install failed" without much more info.
I can install the Netflix app from the US store (using the geo restriction guide on aftvnews), but that is the old Netflix v1 client. The one on the UK store looks like the newer v3 client.
Anyone else having this issue? All other apps downloaded from the UK store work fine. Could just be launch day teething problems (I hope) and not some sort of restriction with the app.
I have the latest rooted 51.1.3.0_user_513011820 firmware by the way.
Cheers
exactly the same for myself, all apps install no problem but netflix fails
How annoying.
Stil not working today, so I suspect it's a firmware restriction so hopefully the US boxes will get the new firmware soon.
Can I confirm from anyone who has Netflix (with the white icon) from the UK store working if it's actually the new client or the old one? Screenshots show the new client, but the version number in the description says v1.0.1 which is the same as the US app - and it's 1/2 the file size on the UK store.
eskay993 said:
How annoying.
Stil not working today, so I suspect it's a firmware restriction so hopefully the US boxes will get the new firmware soon.
Can I confirm from anyone who has Netflix (with the white icon) from the UK store working if it's actually the new client or the old one? Screenshots show the new client, but the version number in the description says v1.0.1 which is the same as the US app - and it's 1/2 the file size on the UK store.
Click to expand...
Click to collapse
The very same issue for me.
I noticed in the logs, the following message comes up:
Code:
W/PackageParser( 6797): /storage/emulated/0/Android/data/com.amazon.venezia/files/apks/65165767-ffeb-4dc8-a422-fa4683554601.apk (at Binary XML file line #27): Requires newer sdk version #19 (current version is #17)
I guess the issue is that the firmware won't update to 51.1.4.0_user_514006420, which by the looks of it is required for the Netflix app.
I've been trying to find a way to install the new firmware manually, but no dice. Can't find a download link for the file and even if I could, I guess I'd have to be rooted (I'm not) to force it.
Ah, that'll be it. That's for pointing it out.
We'll just have to wait I guess for this firmware to roll out to other regions, which most likely it will. In any case, it's still not clear if it's the new client or not so actually there may be no advantage over the US app at this stage.
Hi,
these 2 sites always have the most recent version of the full install package.
Just found this website for W30 variant: https://www.vivo.com/in/support/upgradePackageData?id=183
also https://www.vivo.com/uk/support/upgradePackageData?id=10
the id changes depending on the country but file remains the same
and this for W10 variant: http://www.vivo.com.cn/upgrade/detail?modelId=282
here is the link for W20: https://www.vivo.com/sg/support/upgradePackageData?id=1872
also, if y'all were curious as to what is the last part of any of the file, it is the UNIX time
for instance, https://sysupwrdl.vivo.com.cn/upgra....0.13.8.W10.V000L1-update-full_1661926997.zip was added on GMT: Wednesday, August 31, 2022 6:23:17 AM
For w30 the newest version is 12.0.12.12 not 12.0.12.5 like in this link
qualin said:
For w30 the newest version is 12.0.12.12 not 12.0.12.5 like in this link
Click to expand...
Click to collapse
this link is the official link but I agree, same for W10 where they offer 12.0.13.8 but most recent is 12.0.13.10
anyway, good to have just in case
Hello people, nothing to do so that the applications always remain in the background? I constantly lose notifications because they end in the background
see this:
and not vivo.pm, vivo.pem is the vivo service.