Develop Bugs

complete galaxy y rooting, odin and stock guide

Hi, guys i just thought that when we mess up our galaxy y then we have to search again and again, separately for root file, stock firmware and odin so i bring to you a complete file that contains the stock firmware, the root file, and odin also. it is a rar file and none of the components have been created by me.
Credits:
stock firmware: doky
odin: google
root file: i don't remember sorry
guide for new ones:
stock firmware recovery:
1)get ur mobile to download mode or odin mode by shutting down and then pressing vol down + power button + home button. then press vol up when the warning comes ( don't worry nothing will happen )
2)connect mobile to pc and open odin. make sure u have mobile drivers. get them by installing kies.
3) click on pda and choose the file pda_s5360_dxlc1. now on csc and choose the file csc_s5360_dxlc1. now on phone and choose modem_s5360_dxlc1.
4) check auto reboot and f.reset time but make sure to uncheck all others. click start. if pass comes written on one of the upper boxes then it's done.
root guide:
1)shut down mobile.
2)get to recovery by pressing vol up + power button + home button.
3) choose install from sd card and choose direct root file.
4) it is done
5)reboot
get it here: here

just to let you know its not a good idea for people from europe to flash that stock firmware - its Indonesia, Malaysia, Philippines, Singapore, Vietnam firmware
its also out dated
you also dont need kies to instal the drivers - there is a usb drivers file from samsung which is much smaller so unless you actually use kies there is no need for it
later firmware and firmware for other countries can be found
http://forum.xda-developers.com/showthread.php?p=48462297#post48462297

I ThinK
xday123 said:
Hi, guys i just thought that when we mess up our galaxy y then we have to search again and again, separately for root file, stock firmware and odin so i bring to you a complete file that contains the stock firmware, the root file, and odin also. it is a rar file and none of the components have been created by me.
Credits:
stock firmware: doky
odin: google
root file: i don't remember sorry
guide for new ones:
stock firmware recovery:
1)get ur mobile to download mode or odin mode by shutting down and then pressing vol down power button home button. then press vol up when the warning comes ( don't worry nothing will happen )
2)connect mobile to pc and open odin. make sure u have mobile drivers. get them by installing kies.
3) click on pda and choose the file pda_s5360_dxlc1. now on csc and choose the file csc_s5360_dxlc1. now on phone and choose modem_s5360_dxlc1.
4) check auto reboot and f.reset time but make sure to uncheck all others. click start. if pass comes written on one of the upper boxes then it's done.
root guide:
1)shut down mobile.
2)get to recovery by pressing vol up power button home button.
3) choose install from sd card and choose direct root file.
4) it is done
5)reboot
get it here: here
Click to expand...
Click to collapse
Well You Should GaVe The Original 2.3.6 For Every Country
It They Install ThiS Via odin in other countrt They Wont Be Able To Regain Back Warranty.
Well I also Think ThaT There Are Many Threat About This Topic Already.

Thanks
sent from terminal emulator

Help｡｡｡root and flash recovery galaxytab s 10.5 T807J (SCT21ーJAPAN)

Hello! I need help to root and flash recovery galaxy tab 10.5 t807j. Please. Thanks all

Luongtabs said:
Hello! I need help to root and flash recovery galaxy tab 10.5 t807j. Please. Thanks all
Click to expand...
Click to collapse
You need to post the specs of this device, region, firmware build etc.

ashyx said:
You need to post the specs of this device, region, firmware build etc.
Click to expand...
Click to collapse
What is this? Thank
Model number SCT21
Android version. 6.0.1 Android security patch level December 1, 2016
Baseband version SCT21KDU1CPL3
Kernel version 34.0-9S633hS Sun Dec 18 10:26:59 KST 2016
Build number MMB 29M.3CT21KDU1CPL3
SE for Android status Enforcing SEPE SECMOBILE 6.0.1 0032 Sun Dec 18 12:35:43 2016
Security software version ASKS 1.2 161011
Knox version KNcy 2.6
Standard SDK 5.60
Premium SDK 2.6.0
Customization SDK 2.6,0
Container 2.6. CEP 2.0.1 Enterprise Billing 1.2.0
OP 26.0 SE for Androl c 2.20 SS 2.5.0

ashyx said:
You need to post the specs of this device, region, firmware build etc.
Click to expand...
Click to collapse
Luongtabs said:
Hello! I need help to root and flash recovery galaxy tab 10.5 t807j. Please. Thanks all
Click to expand...
Click to collapse
Please. Help me

Luongtabs said:
Please. Help me
Click to expand...
Click to collapse
You should be able to use the sprint version of twrp.
https://forum.xda-developers.com/ga...rp-2-8-5-0-recovery-snapdragon-t3055758/page4

Sct21 japan *(sm-t807j)
Luongtabs said:
Hello! I need help to root and flash recovery galaxy tab 10.5 t807j. Please. Thanks all
Click to expand...
Click to collapse
Hi, there. (ﾉ◕ヮ◕)ﾉ*:・ﾟ✧.
U need the firmware sct21, odin3, recovery (team win recovery project v2.8.7.0) and supersu 2.79 (for kitkat or lollipop use supersu 2.78, the recovery will be the same)
U will need the firmware:
*AP_SCT21KDU1CPL3_CL9963369_QB11944951_REV00_user_low_ship_MULTI_CERT.tar.md5
*BL_SCT21KDU1CPL3_CL9963369_QB11944951_REV00_user_low_ship_MULTI_CERT.tar.md5
*CP_SCT21KDU1CPL3_CL9963369_QB11944951_REV00_user_low_ship_MULTI_CERT.tar.md5
*CSC_KDI_SCT21KDI1CPL3_CL9963369_QB11944951_REV00_user_low_ship_MULTI_CERT.tar.md5
1-Open the Odin3 select the box correspondent with the files name. (BL, AP, CP, CSC)
2-Put your tablet in bootloader (download mode)
3-Connect your Tablet USB cable at computer.
4- The Odin3 program will show you the number of the port USB and will turn blue. Then Just press START.
Will take around 10 minutes to flash the files. So, just wait finish and disconnect your cable USB when your tablet restart.
Wait your tablet start completely (and install all that horrible factory icons. hahaha) and choice your language (English or Japanese). Create a google account if u want (or skip). Dont make any actualization, its better u didn't put any wifi, because if u select a wifi will make a lot of actualization from Samsung and AU Programs, and will get slowly (U can start the wifi later....)
5- Put the supersu2.79.zip in your external card
6-After your tablet finish to install incializations, restart your tablet and put again in bootloader (download mode)
7-Open Odin3 again at computer. In the box "AP" u will select the recovery.tar.md5 file and click start.
It will flash very fast now, around 15 seconds. Hold the tablet and when you start to reboot press HOME + POWER OFF + VOLUME UP (booaloder mode).
Now your tablet will enter TWRP recovery.
If you can not get into recovery when the program finishes, no problem, wait for the tablet to start, restart and enter bootloder mode.
When you enter TWRP recovery, click install, external storage, select the file supersu2.79.zip and install.
Reboot and READY !!!
(Install the superbox and root check apps, for authenticate your root.)
****that its not a link, its just the name of the files that u need to use!!! If u dont find send me a email and I can share with u in google drive. (its 4.08GB )
For SANSUNG GALAXY TAB S i have the original 4.4 kit kat (SCT21KDU1ANK4), 5.0 Lollipop() and 6.0 Marshmallow(SCT21KDU1CPL3).
****** You will need install the ADB DRIVERS. If u install kies (not kies 3!! just kies) or Smart Switch, the adb drivers will be installed automatic on your computer.
***THAT ITS JUST FOR SAMSUNG TAB S SCT21 JAPAN!!!!!!
もし、 問題 に あったらメール して下さい。(˶◕‿◕˶✿)
じゃねえ。 *:･ﾟ✧(=✪ ᆺ ✪=)*:･ﾟ✧

M0rg4n4 said:
Hi, there. (ﾉ◕ヮ◕)ﾉ*:・ﾟ✧.
U need the firmware sct21, odin3, recovery (team win recovery project v2.8.7.0) and supersu 2.79 (for kitkat or lollipop use supersu 2.78, the recovery will be the same)
U will need the firmware:
*AP_SCT21KDU1CPL3_CL9963369_QB11944951_REV00_user_low_ship_MULTI_CERT.tar.md5
*BL_SCT21KDU1CPL3_CL9963369_QB11944951_REV00_user_low_ship_MULTI_CERT.tar.md5
*CP_SCT21KDU1CPL3_CL9963369_QB11944951_REV00_user_low_ship_MULTI_CERT.tar.md5
*CSC_KDI_SCT21KDI1CPL3_CL9963369_QB11944951_REV00_user_low_ship_MULTI_CERT.tar.md5
1-Open the Odin3 select the box correspondent with the files name. (BL, AP, CP, CSC)
2-Put your tablet in bootloader (download mode)
3-Connect your Tablet USB cable at computer.
4- The Odin3 program will show you the number of the port USB and will turn blue. Then Just press START.
Will take around 10 minutes to flash the files. So, just wait finish and disconnect your cable USB when your tablet restart.
Wait your tablet start completely (and install all that horrible factory icons. hahaha) and choice your language (English or Japanese). Create a google account if u want (or skip). Dont make any actualization, its better u didn't put any wifi, because if u select a wifi will make a lot of actualization from Samsung and AU Programs, and will get slowly (U can start the wifi later....)
5- Put the supersu2.79.zip in your external card
6-After your tablet finish to install incializations, restart your tablet and put again in bootloader (download mode)
7-Open Odin3 again at computer. In the box "AP" u will select the recovery.tar.md5 file and click start.
It will flash very fast now, around 15 seconds. Hold the tablet and when you start to reboot press HOME + POWER OFF + VOLUME UP (booaloder mode).
Now your tablet will enter TWRP recovery.
If you can not get into recovery when the program finishes, no problem, wait for the tablet to start, restart and enter bootloder mode.
When you enter TWRP recovery, click install, external storage, select the file supersu2.79.zip and install.
Reboot and READY !!!
(Install the superbox and root check apps, for authenticate your root.)
****that its not a link, its just the name of the files that u need to use!!! If u dont find send me a email and I can share with u in google drive. (its 4.08GB )
For SANSUNG GALAXY TAB S i have the original 4.4 kit kat (SCT21KDU1ANK4), 5.0 Lollipop() and 6.0 Marshmallow(SCT21KDU1CPL3).
****** You will need install the ADB DRIVERS. If u install kies (not kies 3!! just kies) or Smart Switch, the adb drivers will be installed automatic on your computer.
***THAT ITS JUST FOR SAMSUNG TAB S SCT21 JAPAN!!!!!!
もし、 問題 に あったらメール して下さい。(˶◕‿◕˶✿)
じゃねえ。 *:･ﾟ✧(=✪ ᆺ ✪=)*:･ﾟ✧
Click to expand...
Click to collapse
Thank you very much. You send me link rom 4.4, 5.0 and 6.0. Mail [email protected]

Luongtabs said:
Thank you very much. You send me link rom 4.4, 5.0 and 6.0. Mail [email protected]
Click to expand...
Click to collapse
hello , help me with a link please

⚠️Galaxy A71 Root || Unlock Bootloader || Flash Official Firmware [Binary 1] February

Latest recommended firmware for latest update faster: (Updated weekly).​https://samfrew.com/model/SM-A715F/region/SEK/​
WARNING: You can't downgrade anymore once you flashed U2 update !
You will need:
-Odin v3.14.1
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
-Galaxy A71 Latest USB Driver
https://developer.samsung.com/galaxy/others/android-usb-driver-for-windows
You want to download latest firmware directly from server? (fast download)
Samfirm 0.4.1 or Frija 1.4.2
https://samfirmtool.com/samfirm-v0-4-1
https://github.com/wssyncmldm/frija/releases
Frija not working ? install both vcredist_x00 for your device !
(Check your windows settings to know which version to install).
(Microsoft Visual C++ 2010 Redistributable Package) and (Microsoft Visual C++ 2008 Redistributable Package)
-https://www.microsoft.com/en-US/download/details.aspx?id=29 (x86) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=5555 (x86) 2010
-https://www.microsoft.com/en-US/download/details.aspx?id=15336 (64bit) 2008
-https://www.microsoft.com/en-US/download/details.aspx?id=14632 (64bit) 2010
-Open Frija and type in your model (mine is SM-A715F) and your CSC : (mine is LUX).
(All CSC's and models on Samfrew: https://samfrew.com/model/SM-A715F/).
-Download and extract SM-A715XX_1_00000000000000_xxxxxxxxxx_fac.zip
On your device:
If you want to unlock bootloader:
-Go to Settings then to About phone and find your build number.
-Tap on your build number 6 times until you see “You’re now a developer”.
-Go in Developer options > enable OEM unlocking.
-Connect the device to your PC.
-Power off your device with POWER and volume DOWN and directly hold volume UP and DOWN together!
-Device will boot in DOWNLOAD MODE.
-Long press volume UP to unlock the bootloader. This will wipe your data and automatically reboot your device!
If you dont want to unlock bootloader:.
-Download and extract Odin and open it as administrator.
Still in DOWNLOAD MODE:
-Click on BL and select BL_A715FXXXU1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on AP and select AP_A715FXXXU1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT_meta_OS9.tar.md5
-Click on CP and select CP_A715FXXXU1AXXX_CP14483800_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_OXM_A715FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_OXM_A715FXOXM1AXXX_CL16843479_QB27603640_REV00_user_low_ship_MULTI_CERT.tar.md5
-Click on START and wait for installation, when done you can unplug your device.
ROOT​Your KNOX status will be tripped if you follow this tutorial...​What's knox ? : https://www.google.com/search?q=samsung+knox+explained
-Download the latest stock firmware for your Samsung Galaxy A71 with Samfirm/Frija app (faster) or Samfrew/Sammobile website (way slower).
https://samfrew.com/model/SM-A715F/
-Extract the SM-A715XX_1_EXAMPLE_0000000000_fac.zip file with 7zip or any other unzipper.
-Copy the (AP_A715XXXXU1XXXX_CL00000000_QB00000000_REV00_user_low_ship_MULTI_CERT_meta_OS10.tar.md5) file and transfer it to your internal storage.
-Download and install Magisk Manager APK https://github.com/topjohnwu/Magisk/releases/download/manager-v7.5.1/MagiskManager-v7.5.1.apk
-Open Magisk Manager and go to Install > Install > Select and Patch a file.
-Navigate through the storage and select the extracted AP file.
The firmware will be patched and will be found in Internal Storage/Download/magisk_patched.tar.
-Transfer the patched file to your PC.
-Turn OFF your device and boot into DOWNLOAD MODE.
-In Odin, click on AP and select the patched tar file, Uncheck “Auto Reboot” and click on Install.
The tool will flash Magisk V20 on your Samsung Galaxy A71.
To boot in recovery or boot the system with Magisk installed:
1. Powering up normally → System without Magisk
2. Power + Volume Up → Bootloader warning → Release all buttons → System with Magisk
3. Power + Volume Up → Bootloader warning → Keep holding volume up → Actual recovery

Discord A series group to help users:
https://discord.gg/xrnrU8k
Don't need to dowload theses files if you don't know their purposes.
A71_EUR_OPEN.pit
https://mega.nz/#!Z1BRVQIZ!j3EkHOBbp7--iUAgZ2T56iBMzZMtKZoh17lphPqugtc
Combination firmwares:
COMBINATION_FAC_FAQ0_A715FXXU1ATA1
https://androidfilehost.com/?fid=4349826312261713325
COMBINATION_FAC_FAQ0_A715FXXU1ATA2
https://androidfilehost.com/?fid=4349826312261713327

Finally a reason to actually buy this phone, thank you

@BK☑️
Thanks for the share, would be appreciated if you can mention how to update over OTA when we have root the phone. Thanks.

Cuvillier said:
@BK
Thanks for the share, would be appreciated if you can mention how to update over OTA when we have root the phone. Thanks.
Click to expand...
Click to collapse
The reason it's not mentionned is simply because we can't, we just need to download latest firmware and patch it with magisk.
topjohnwu stated ( and i tested it myself ) that if we flash the latest OTA it will brick the device, which is logic.
We need to patch the latest firmware with magisk, if we go from a rooted environment to a non rooted it will brick.
I hope i cleared your thoughs.

BK said:
The reason it's not mentionned is simply because we can't, we just need to download latest firmware and patch it with magisk.
topjohnwu stated ( and i tested it myself ) that if we flash the latest OTA it will brick the device, which is logic.
We need to patch the latest firmware with magisk, if we go from a rooted environment to a non rooted it will brick.
I hope i cleared your thoughs.
Click to expand...
Click to collapse
Okay, so let's say if i get new OTA push notification, i download it first online and then i follow your root tutorial to update it with magisk included?

Cuvillier said:
Okay, so let's say if i get new OTA push notification, i download it first online and then i follow your root tutorial to update it with magisk included?
Click to expand...
Click to collapse
exactly, download the needed firmware and extract the AP file and put it in the download folder on your A71 device, then patch it to obtain a magisk_patched.tar file to flash in odin.

BK said:
exactly, download the needed firmware and extract the AP file and put it in the download folder on your A71 device, then patch it to obtain a magisk_patched.tar file to flash in odin.
Click to expand...
Click to collapse
Understood. Do you know if it will be possible to install twrp too ?

Cuvillier said:
Understood. Do you know if it will be possible to install twrp too ?
Click to expand...
Click to collapse
twrp is compatible, ask the developers of theses devices to build twrp for the a71 :
(the Galaxy A71 have the same Soc has theses devices)
(Snapdragon 730).
-Xiaomi Redmi K20
-Samsung Galaxy A80
-Poco X2
-Realme X2
-Oppo Reno 2
-Lenovo Z6
ill ask samsung open source release center to provide the source code for this device. (i'm an A70 user not A71).
edit: the source code will be released later this week.
edit2: source code is released. (18/02/2020)

BK said:
twrp is compatible, ask the developers of theses devices to build twrp for the a71 :
(the Galaxy A71 have the same Soc has theses devices)
(Snapdragon 730).
-Xiaomi Redmi K20
-Samsung Galaxy A80
-Poco X2
-Realme X2
-Oppo Reno 2
-Lenovo Z6
ill ask samsung open source release center to provide the source code for this device. (i'm an A70 user not A71).
edit: the source code will be released later this week.
Click to expand...
Click to collapse
Thanks, and about unlocking bootloader, is there something I should be aware of after that ?

Cuvillier said:
Thanks, and about unlocking bootloader, is there something I should be aware of after that ?
Click to expand...
Click to collapse
just that your knox bit will be tripped (0x1).

BK said:
just that your knox bit will be tripped (0x1).
Click to expand...
Click to collapse
Thank you, and got another question (sorry ), on your booting instructions, you say that to boot using using magisk we need to press vol+ and power, but will that be possible to boot as usual with power button and boot with magisk by default ?

Cuvillier said:
Thank you, and got another question (sorry ), on your booting instructions, you say that to boot using using magisk we need to press vol+ and power, but will that be possible to boot as usual with power button and boot with magisk by default ?
Click to expand...
Click to collapse
once twrp is released yes (if someone port it).
there is another method but that's another story.

BK said:
once twrp is released yes (if someone port it).
there is another method but that's another story.
Click to expand...
Click to collapse
Thanks, and about the root, if i understood, that way we can flash magisk without need to unlock bootloader ?

Cuvillier said:
Thanks, and about the root, if i understood, that way we can flash magisk without need to unlock bootloader ?
Click to expand...
Click to collapse
Nope you didn't understood, you can't root without unlocking bootloader.

It is not working
I downloaded hungarian firmware from frija, copied the AP file to my phone, patched with magisk, copied the patched file to my computer, booted my phone into download mode, flashed the ap file with odin (and yes i unchecked the auto reboot), and after it finished, I pressed the volume down and power button to reboot, and when the screen went off, I quickly changed to volume up and power button and hold until the bootloader warning appeared, and realased all buttons. After it booted, i opened magisk manager and it says magisk is not installed what can i do? ( and yes, I unlocked the bootloader)

Source code is up and can be downloaded on here! :
https://opensource.samsung.com/uploadSearch?searchValue=A715

I've tried rooting several times to no avail, I've unlocked and flashed everything with the patched magisk setup, I'm using the SM-A715F BTU firmware as that's what my phone was beforehand
When i try and do the volume up boot then release at the warning screen it just does a reboot cycle and never boots I have to force it it shut down and boot normally
I cant even restore phone to a point where SafetyNet validates so no Pokemon Go and such

can we unroot and recover the samsung knox?

Cyber Axe said:
I've tried rooting several times to no avail, I've unlocked and flashed everything with the patched magisk setup, I'm using the SM-A715F BTU firmware as that's what my phone was beforehand
When i try and do the volume up boot then release at the warning screen it just does a reboot cycle and never boots I have to force it it shut down and boot normally
I cant even restore phone to a point where SafetyNet validates so no Pokemon Go and such
Click to expand...
Click to collapse
Ok ladies and gentlemen I finally got it working, and here's what I had to do
You'll need to install 7zip or something that handles TARs and LZ4 that you can grab from github it was the second result on google for me
Once you've patched the AP file in Magisk Manager and copy it back to your pc, Open up that tar file and delete all files except recovery.img and vbmeta.img
Then open the original prepatched AP file in 7Zip and extract the boot.img.lz4 then take that file and drag it onto the lz4.exe from the lz4 utilities
you should now have a nice clean uncompressed boot.img, put that back onto the phone and patch it with magisk manager, you should now have magisk_patched.img copy that back to the pc and rename it boot.img and put it in the tar file from earlier so you should have boot.img recovery.img and vbmeta.img
With just these 3 files in the tar you dont have to worry about wiping your data again and it will patch pretty fast
Open up ODIN again and select AP and choose your new tar file and flash it
Then shut down the phone fully and power it on while holding vol up till you get to the warning screen about the unlocked bootloader let go of vol up and press power to continue and you should find that it boots properly now and magisk manager will show that magisk is installed.

How to Root Your Samsung Galaxy A10 + Install Twrp

READ EVERYTHING CAREFULLY!
1.Your phone warranty will be void after this tutorial!
2.Any small mistake and your phone is bricked/bootlooped!
3.All of your data will be lost so back it up somewhere
Click to expand...
Click to collapse
(Fixed the tutorial my bad.)
Click to expand...
Click to collapse
Hey Guys Im Back! Thank you for the support and how it blew up. I have tested this on Android 10 UI 2.0 and it works better then ever!
Also installed lineage os : https://forum.xda-developers.com/galaxy-a10/development/rom-lineage-os-a10-a105f-t4078093
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download TWRP and 2 other important files
1.Dial *#1234# and it will show the AP and some others, focus on AP paste it on google and get the download for it
2.After downloaded move the AP to your download folder in your android device
3.You will get a magisk_patched.tar after its been offically converted
4.Get the twrp for a10
Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.After you got everything open the .tar archive and extract vbmeta.img, boot.img and you should already have recovery.img on your Desktop
6.Grab all the 3 .img files and archive them into a .tar using 7zip, Now continue to step C,
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find Desktop.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!

i notice thread title says exynos only.. u do know they are all exynos including a102u and a102u1 right?

Oh. Alright thanks for telling me.

Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.

Cupcake 1.5 said:
Press on app? I have nothing in odin saying that, do you mean ap?
Edit: guess not....i'm bricked, stuck on galaxy logo, device not recognized by pc, holoding power button wont force reboot, nothing lol.
Edit2: can force reboot holding volume down and power but instantly stuck on logo again, cannot power off or enter download, nothing...bricked. Followed this guide to the letter. I assumed when you said app in odin you meant ap since there is no app button. My bootloader unlocked then I went to flash in odin the tar i made with patched boot and vbmeta, along with recovery linked. I used matching firmware to what my A10 has also. Would not mind if i could get back into download mode, but that looks impossible now.
Edit3: Managed to get download mode but had to be so quick...hopefully I can reflash stock now.
Click to expand...
Click to collapse
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:

cmz6996 said:
Im sorry for that and yes i meant AP.
If you wanted to reboot you had to hold vol up vol down and power at the same time and you sure that you unlocked the bootloader and used the right firmware?
Also tell me the AP and from which source have you downloaded it :laugh:
Click to expand...
Click to collapse
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Oh! Im happy to hear that!

Cupcake 1.5 said:
All sorted now, back on stock with twrp and root It was a schoolboy error by me, the firmware downloaded was corrupted lol.
Click to expand...
Click to collapse
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?

cmz6996 said:
Could you also tell me from where have you downloaded the corrupted firmware so i can warn the others?
Click to expand...
Click to collapse
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.

Cupcake 1.5 said:
The corruption was my side, I was using a download manager, but when I downloaded through chrome it was all good. As I said, schoolboy error on my part for not checking md5. I used sammobile site for the firmware.
Click to expand...
Click to collapse
Alr thanks.

Can you upload it to Mediafire? Mega marks a "temporal error"...

Kyua said:
Can you upload it to Mediafire? Mega marks a "temporal error"...
Click to expand...
Click to collapse
At me it works?

Works on a105m?

Axeggus said:
Works on a105m?
Click to expand...
Click to collapse
Yes

i receive message that i running samsumg not official firmware after odin install recovery.tar

not work
cmz6996 said:
So i tried using afaneh92's tutorial which will be linked here : https://forum.xda-developers.com/galaxy-a10/how-to/magisk-root-galaxy-a10-series-t3963822
Which lead to me bootlooping or softbricking and my storage was reduced from 32 gb to 16Gb so i decided to work on my own method!
Credits go to afaneh92 for the Twrp!
BEFORE YOU START YOU SHOULD HAVE
1.Samsung Drivers installed
2.Odin Installed
3.7zip Installed
4.A data transfer cable
5.A Proper working brain
If you have all of those lets start!
A: Phone settings
1.Go in settings>about phone>software information>build number tap that 5 times until it says "You are a developer now" then you will have Developer options unlocked
2.Then go in developer functions and find OEM unlocking tick that on scroll down until you see Usb Debugging and tick that also Disable Auto Updates option
B: Download Your firmware and TWRP
1.Go in your calls app and dial *#1234# Then You will receive some details about your AP, CP etc. look at the AP then download the firmware by searching it on google and (download it from sites like sammobile etc)
2.After you got your firmware connect your device to your pc after its connected send the entire firmware to the device in the Downloads folder
2.1. Install Magisk Manager
3.After you're in magisk manager press on install (first one) then press install again then press Select and Patch a File
3.1.Chose the firmware you saved on the Downloads folder
3.2.After you tap on it it should've already started modifying it
4.After it finished go back to your pc and move the magisk_patched.tar back to your desktop (It should be located in Downloads)
5.From the magisk_patched.tar extract boot.img and vbmeta.img to your desktop
5.1.Download the twrp file here : https://mega.nz/#!OU1WhSDZ!vQz5K1wpqBhg0hCD59aziaHPxFlUsT_2WG8SgT8p6iY
5.2.After recovery.img(TWRP) has been downloaded move it to your desktop
5.3.Select all those three items(vbmeta.img,recovery.img,boot.img) right click then Find 7Zip then press add to archive
5.4.Rename the Archive name to recovery.tar and make sure the archive format is .tar
6.After the Archive has been downloaded follow the steps in C
C :Unlocking The Bootloader and Getting Into Download Mode (THE PART WHERE YOU RESET YOUR PHONE)
1.Turn Off your phone
1.2.Put your data cable into your PC(dont connect your phone to it yet)
1.3.Hold Volume Up and Down then insert the cable into your phone
1.4.When you see a bluescreen let go
1.5.Hold vol up until you see another screen then let go for 1 second and hold vol up again
2.Your device will reset itself and reboot
2.1.After the device has booted in into the setup take the cable out after Turn off your phone
2.2.Hold Vol Up and Down again and connect the cable
2.3.Let go when a blue screen appears then press vol up until you are in download mode
D: Flashing TWRP
1.Open Odin
2.Press on AP then find recovery.tar and press open
3.Press start and let it do its thing
4.After your Phone has rebooted you oficially have TWRP installed
5.If you want to know hoe to root go to step E
E: Installing Magisk
Since magisk is counted as the best rooting option rn i will be using it in this tutorial(Sorry supersu fans)
1.Install Magisk Manager
2.Press on Install (first one) then press install again and after that press Install Zip Only
3.Then go into Twrp by doing the steps below
3.1.Turn off your device
3.2.Hold vol up and power button untill you see TWRP logo
4.Press install
4.1.Find magisk-v20.4(20400).zip
4.2Swipe right on the bottom to flash it then press reboot system now.
5.Now you have TWRP,Root and Magisk Congratulations!
What happens if something goes wrong.
1.SV Error Device 1 library 0 - You installed the wrong firmware look for the right firmware.To check go in recovery mode and look at the A105XXXXXX and then look for a download. Remider AP->AP BL->BL CP->CP HOME_CSC->CSC
2.vbmeta.img error - you have the wrong vbmeta.img file. Redownload the original firmware and take out the right vbmeta.img next time you try flashing. Reminder AP->AP BL->BL CP->CP HOME_CSC->CSC
3.A blue screen telling you to use samsung switch emergency update. That wont work so just flash the original firmware and try flashing twrp again.
4.When i try to boot in it gets me into TWRP - Thats just because that your data is corrupted and to fix it while in TWRP mode press wipe then swipe after its done press Reboot To System. That should be a fix
5.My internal storage is just full of weird numbers and I can't download anything on it! Go in TWRP then wipe,press advanced wipe, click on internal storage and data, swipe. That should fix the error
6.Boootlooping or Bricked! Installed corrupted firmware or the recovery was f-ed up. Then install the right firmware and redo the steps!
If you have issues during the process send it in the comment ill try to respond as fast as i can!
Click to expand...
Click to collapse
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)

andrea2o18 said:
hi guy... very good guide but it not work for my galaxy a10 ....i only have unlock the bootloader... if i try to get patched recovery ... it not work.... i have device blocked black screen for samsung software... or i cant go recovery mode it say me a error of vbmeta)
Click to expand...
Click to collapse
You installed the wrong fir.ware check your right firmware.

BlueFolks said:
i receive message that i running samsumg not official firmware after odin install recovery.tar
Click to expand...
Click to collapse
Be cause you modified the firmware ignore that message

have you fixed the storage reduced to 16gb problem?

I have a Samsung galaxy sm-a10. I've tried everything here, even combination files. The error I ALWAYS get is 'failed flashing ROM... OEM lock'
Of course I have unlocked OEM in developer options, but still I get this error in the bootloader.
Any ideas?

How To Guide Guide to root Galaxy Z Fold 3(B/N/0), unlock bootloader and flash official firmware (noob friendly)

Code:
Your warranty is now void.
If you root your device, Your KNOX status will be tripped.
You can still pass the safety net after you root if you follow the instructions.
I am not responsible for bricked devices, dead SD cards although it is not really possible
Please do some research if you have any concerns about doing this to your device
How to flash official firmware? (not the root and unlock bootloader part!)
You will need:
A Galaxy Z Fold 3 and common sense
Samsung Odin (the flashing tool of the official firmware)
https://dl2018.sammobile.com/Odin3-v3.14.1.zip
You need to extract the zip file and you are going to use the file Odin3_v3.14.1.exe inside the folder.
Samsung Android USB Driver for Windows
Samsung Android USB Driver | Samsung Developers
You need the driver only if you are developing on Windows and want to connect a Samsung Android device to your development environment over USB.
developer.samsung.com
Double-click and install the exe file.
Samsung Official Firmware
Release 1.0.3 · zacharee/SamloaderKotlin
Contribute to zacharee/SamloaderKotlin development by creating an account on GitHub.
github.com
Download the platform you want to download to. (Windows)
You need to extract the zip and double click open the file Bifrost.exe inside the folder.
You need to fill in the Model, Region, press the Check for Updates button and the Download button.
How to find the Model: on your phone → Settings → About Phone → The third row says the Model number and you need to remove the part with the part of /xx, for example, SM-F926B/DS and you only need to type SM-F926B
How to find the Region: You can check the Region at this link https://samfrew.com/model/SM-F926B/
You need to find find a three-letter word depending on your carrier and country and type it in Bifrost, for example, EVR
Press the Check for Update button and download it with the Download button.
Put it to a place you can easily find, ie. Desktop.
After downloading it, find the file SM-xxxxx_x_xxxxxxxx_xxx.zip.enc4 on the place you put it and change the document format from .enc4 to .zip. Then, double click and extract the file.
Open Odin3_v3.14.1.exe and turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Go back to Odin3_v3.14.1.exe:
-Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select AP_xxxxxxxxxxx.tar.md5
-Click on CP and select CP_xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
Press Start to flash the firmware, after done, your device will automatically reboot to the system.
How to unlock the bootloader?
Go to your phone → Settings → About Phone → Software information → Press Build number 6 times until you see the notice “You’re now a developer”
Go in Settings → Developer options → enable OEM unlocking
Power off your phone first. Then, connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone.
When you arrived at Download Mode, long press volume up until you see the black screen. Confirm to unlock the bootloader and you will erase your device.
How to root your phone?
After you unlock your bootloader, you set up your phone and make sure you do not sign in google account first. Install Magisk https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk on your phone. Oh yes, in case you do not know, you need to allow the app to install apps so that you can install the apk.
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
(If you want to keep your data don't flash CSC).
-Click on CSC and select CSC_OMC_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
Optional: If you want to have the safety net passed (most of the banking apps use it), then you need to install the zip
as a Magisk module in Magisk https://github.com/kdrag0n/safetynet-fix/releases
How? Go to Magisk → Modules → install from storage and select the zip you downloaded.
How to update without losing root and data
Open Odin and put the new magisk_patched file in the AP slot, the BL and CP from your new firmware into their respective slots and importantly *HOME_CSC* into the CSC slot.
Press start and let Odin do its stuff.
When flashed, do not wipe.
Press and hold Vol-down and Power
As soon as the screen appears, let go of all buttons.
Within moments, the phone with updates, data and magisk rooted will present in front of you. Hurray!

Thanks for the post I want to try it but I'm on SM-F926U also I don't want to lose any data will this erase all my data such as apps, pics etc with backup?

AnnaNguyen said:
Thanks for the post I want to try it but I'm on SM-F926U also I don't want to lose any data will this erase all my data such as apps, pics etc with backup?
Click to expand...
Click to collapse
You must lost data when you root your phone.
What you can do is using Samsung or Google backup and move your photos and files to your PC

Thank you William again I just did it and I confirm works on SM-F926U

AnnaNguyen said:
Thank you William again I just did it and I confirm works on SM-F926U
Click to expand...
Click to collapse
You are welcome

Hi i tried to root my samsung galaxy z fold 3 model F926B version android 11 i did all steps using magisk version 23.0 but after i flash the patched rom i keep getting stuck on samsung logo and error says this device version is not official is there anyway i can bypass it?

nathanalbat said:
Hi i tried to root my samsung galaxy z fold 3 model F926B version android 11 i did all steps using magisk version 23.0 but after i flash the patched rom i keep getting stuck on samsung logo and error says this device version is not official is there anyway i can bypass it?
Click to expand...
Click to collapse
Just rooted my new GZF3 SM926B/DS with this method and got to the exact same thing (but using magisk 24.1).
Re-flashed and the same thing again but it was easily fixed.
One more part should be added to the guide.
After you flash the last time with the patched AP-file and get a boot loop to recovery, do a factory reset from (stock) recovery, phone restarts and you have to set it up but magisk is there and you're rooted!
Just go to apps, try to open magisk which will tell you that you need to upgrade to full version, accept, open magisk and accept the "additional part" -> phone reboot one last time and DONE!
You now have a fully functioning and rooted GZF3

iLind said:
Just rooted my new GZF3 SM926B/DS with this method and got to the exact same thing (but using magisk 24.1).
Re-flashed and the same thing again but it was easily fixed.
One more part should be added to the guide.
After you flash the last time with the patched AP-file and get a boot loop to recovery, do a factory reset from (stock) recovery, phone restarts and you have to set it up but magisk is there and you're rooted!
Just go to apps, try to open magisk which will tell you that you need to upgrade to full version, accept, open magisk and accept the "additional part" -> phone reboot one last time and DONE!
You now have a fully functioning and rooted GZF3
Click to expand...
Click to collapse
i did same steps as you but i did it with magisk 23 and worked thanks tho

iLind said:
Just rooted my new GZF3 SM926B/DS with this method and got to the exact same thing (but using magisk 24.1).
Re-flashed and the same thing again but it was easily fixed.
One more part should be added to the guide.
After you flash the last time with the patched AP-file and get a boot loop to recovery, do a factory reset from (stock) recovery, phone restarts and you have to set it up but magisk is there and you're rooted!
Just go to apps, try to open magisk which will tell you that you need to upgrade to full version, accept, open magisk and accept the "additional part" -> phone reboot one last time and DONE!
You now have a fully functioning and rooted GZF3
Click to expand...
Click to collapse
Ah, thanks for your recommendation. I have make it in the video but I have forgotten to mention it in the guide. Sorry.

Does this solve the camera issue on fold 3?

Oracle79 said:
Does this solve the camera issue on fold 3?
Click to expand...
Click to collapse
I think the camera’s all right

Oracle79 said:
Does this solve the camera issue on fold 3?
Click to expand...
Click to collapse
Yes, no problem with the camera. Quite sure it's the OS-update that resolve the issue. So just make sure you download the latest update (BVA9) and flash that one.

AnnaNguyen said:
Thank you William again I just did it and I confirm works on SM-F926U
Click to expand...
Click to collapse
Hey There, Did the F926U have the bootloader unlock option without having to pay for it and do it remotely ?

It was unlocked I got it on galaxyfirmwares for free

Thanks for the Guide , Williamtung
I want to share me experience ( SM-F926B ), updating from a rooted VBA9 to the latest BVB3 firmware , without losing root and data !
Steps:
1. Download the latest stock F926BXXS1BVB3 ( at the time writing this post )
Samsung Galaxy Z Fold3 5G Firmware Download SM-F926B Free Download
Samsung Galaxy Z Fold3 5G Firmware Download SM-F926B Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
2. Patch the stock AP (BVB3) file with magisk and just follow the guide from there... , You will be updated with the latest and rooted , extremely easy !
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.

pvillasuso said:
Thanks for the Guide, Williamtung
I want to share my experience ( SM-F926B ), updating from a rooted VBA9 to the latest BVB3 firmware, without losing root and data!
Steps:
1. Download the latest stock F926BXXS1BVB3 ( at the time writing this post )
Samsung Galaxy Z Fold3 5G Firmware Download SM-F926B Free Download
Samsung Galaxy Z Fold3 5G Firmware Download SM-F926B Free Download ⭐ Official and fast update ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
2. Patch the stock AP (BVB3) file with magisk and just follow the guide from there..., You will be updated with the latest and rooted, extremely easy!
Transfer AP_xxxxxxxxxx.tar.md5 in the firmware you download from your PC/Laptop to your phone.
Open Magisk on your phone and press the install button in the Magisk column. Select 'Select and Patch a File', 'Let's Go' and find the AP_xxxxxxxxxx.tar.md5 and select it. You can have a cup of coffee if you like when you waiting for the patching of the file.
After finishing the patching, you need to transfer the file magisk_patched-24xxx_xxxxx.tar in the Downloads folder back to your PC/Laptop.
Turn off your phone. Connect a side of your USB to your PC/Laptop, keep pressing volume up and down together until you go to Download Mode. Put another side of the USB into your phone. When you arrived at Download Mode press volume up. Open Odin3_v3.14.1.exe on your PC/Laptop:
Click on BL and select BL_xxxxxxxxxx.tar.md5
-Click on AP and select magisk_patched-24xxx_xxxxx.tar
-Click on CP and select CP_xxxxxxxxxx.tar.md5
-Click on USERDATA and select HOME_CSC_OMC_xxxxxxxxxx.tar.md5
When it finishes flashing it, it will automatically reboot and you can gain root access.
Click to expand...
Click to collapse
Thanks for your sharing! I may add this useful information to the guide if you please.

Williamtung said:
Thanks for your sharing! I may add this useful information to the guide if you please.
Click to expand...
Click to collapse
Sure !! , thanks again , this is hands down , the best and easiest way to root/update keeping all your data and setup

Is there a way to Root the F926U?
About to find one.. Was wondering whether anything is possible?

JazonX said:
Is there a way to Root the F926U?
About to find one.. Was wondering whether anything is possible?
Click to expand...
Click to collapse
Not possible unless you able to unlock your bootloader

AnnaNguyen said:
Thank you William again I just did it and I confirm works on SM-F926U
Click to expand...
Click to collapse
So, you successfully unlocked your bootloader and rooted your SM-F926U?
Thanks.