LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 (Marshmallow), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS Github Repo. And if you would like to contribute to LineageOS, please visit out Gerrit Code Review.
Device-specific source code:
Kernel source: https://github.com/Lehkeda/kernel_lenovo_sp7731ge
Downloads:
ROM: https://drive.google.com/file/d/1F_dTLQGIspPb4LI8jNmnrE-iVovkSaKa/view?usp=sharing
Gapps: http://opengapps.org
Extras (su or Weather Provider): https://download.lineageos.org/extras
What works?
Wi-Fi
RIL (partially)
Sensors (Accelerometer, Compass, Light, Proximity, etc.)
Camera
Video (playback & recording)
Audio (playback & recording)
GPS
Everything else not listed under "known issues"
Known Issues:
Bluetooth doesn't work
You'll get "CM audio error" on boot. Just ignore that.
Keyboard error when booting the system up, workaround is to install an another keyboard software like OpenBoard.
Incorrect RIL signal. Shouldn't be a problem .
WiFi doesn't get disabled on sleep mode, and it's draining the battery
Installation Instructions:
Download TWRP 3.0.3 here: https://www.androidfilehost.com/?fid=15664248565197185286
Root your phone!
Flash TWRP 3.0.3 to your phone using Rashr/Flashify
If you did flash the recovery, copy the ROM to your phone, then reboot to recovery
In the recovery, wipe: Data, Dalvik/ART cache, System, Cache
Install the ROM, and GApps! (optional)
When you did finish installing the ROM, reboot!
Woala! You installed LineageOS to your Lenovo A1000
What is the base ROM?
TriDiscord said:
What is the base ROM?
Click to expand...
Click to collapse
grandprimeve3g
hello!
my old phone is a dual sim a1000.
~2 years ago i wanted to flash a newer android cuz the stock was a slow piece of **** but i was not successful.
ive flashed twrp 3.2.1-0 on it somehow (i dont remember, was a long time ago) then ive tried to install a custom rom but didnt work, it got stuck on the lenovo screen. since i havent found any other custom rom ive just put it into my drawer and forget about it.
today i wanted to try it again so after a quick search ive found your rom and it worked. finally the phone can start and basically its not a brick anymore. but that bluetooth problem is severe.
since your post is from the summer, can i ask if you abandoned the project or not? did you manage to get the BT working eventually? is there any new build i can try that may work?
if not, do you know how should i restore the stock rom to this phone? is it worth it tho? or the broken custom lineage is still better than the bloated stock in 2022?
thank you
kwallet said:
hello!
my old phone is a dual sim a1000.
~2 years ago i wanted to flash a newer android cuz the stock was a slow piece of **** but i was not successful.
ive flashed twrp 3.2.1-0 on it somehow (i dont remember, was a long time ago) then ive tried to install a custom rom but didnt work, it got stuck on the lenovo screen. since i havent found any other custom rom ive just put it into my drawer and forget about it.
today i wanted to try it again so after a quick search ive found your rom and it worked. finally the phone can start and basically its not a brick anymore. but that bluetooth problem is severe.
since your post is from the summer, can i ask if you abandoned the project or not? did you manage to get the BT working eventually? is there any new build i can try that may work?
if not, do you know how should i restore the stock rom to this phone? is it worth it tho? or the broken custom lineage is still better than the bloated stock in 2022?
thank you
Click to expand...
Click to collapse
hi, let's answer to these questions!
kwallet said:
since your post is from the summer, can i ask if you abandoned the project or not? did you manage to get the BT working eventually? is there any new build i can try that may work?
if not, do you know how should i restore the stock rom to this phone? is it worth it tho? or the broken custom lineage is still better than the bloated stock in 2022?
Click to expand...
Click to collapse
1. yes, i did abandon the project, since i didnt have any testers.
2. No, I didn't get it working, I don't own this device. I ported it and guess it boots. D
3. Nope, sorry. I might try to port LOS14.1 if you can test the ROM of course.
4. I don't know. But it's definitely NOT worth it to install stock rom back since it's full of bloatware. It's better to use LineageOS
Headset is Reversed, How to fix this ?
AetherTF said:
Headset is Reversed, How to fix this ?
Click to expand...
Click to collapse
What do you mean "reversed"
notnoelchannel said:
What do you mean "reversed"
Click to expand...
Click to collapse
Im sorry my english is broken i mean Left audio coming from right headset and vice versa
AetherTF said:
Im sorry my english is broken i mean Left audio coming from right headset and vice versa
Click to expand...
Click to collapse
I think it's not a rom-related problem, can you try with an other headset?
notnoelchannel said:
I think it's not a rom-related problem, can you try with
Click to expand...
Click to collapse
I already try this headset with 2 different phone and its work correctly
notnoelchannel said:
hi, let's answer to these questions!
1. yes, i did abandon the project, since i didnt have any testers.
2. No, I didn't get it working, I don't own this device. I ported it and guess it boots. D
3. Nope, sorry. I might try to port LOS14.1 if you can test the ROM of course.
4. I don't know. But it's definitely NOT worth it to install stock rom back since it's full of bloatware. It's better to use LineageOS
Click to expand...
Click to collapse
hello. thank you for replying.
if you want i can test any build you throw at me just i dont wanna flash another bootloader cuz i dont wanna risk permabricking the phone. right now that twrp 3.2.1 is installed and working properly.
LineageOS 14.1 is ready for testing!!
Can someone test it please?
You can find the download link here.
notnoelchannel said:
LineageOS 14.1 is ready for testing!!
Can someone test it please?
You can find the download link here.
Click to expand...
Click to collapse
ill install it when i get home
kwallet said:
ill install it when i get home
Click to expand...
Click to collapse
Make sure to make a backup of your current os!!
notnoelchannel said:
Make sure to make a backup of your current os!!
Click to expand...
Click to collapse
no joy
kwallet said:
no joy
Click to expand...
Click to collapse
Oops sorry the partitions are wrong lemme fix that
Go into the zip, delete everything inside the META-INF folder, and replace them with this. Then repack the zip and try to install the rom again.
notnoelchannel said:
Go into the zip, delete everything inside the META-INF folder, and replace them with this. Then repack the zip and try to install the rom again.
Click to expand...
Click to collapse
installer finishes but after reboot nothing happens, its stuck on lenovo logo. ive waited 10 minutes but nothing. maybe ive f..ed up the zip?
didnt unzip, just opened with winrar, copypasted the inf and saved the zip.
kwallet said:
installer finishes but after reboot nothing happens, its stuck on lenovo logo. ive waited 10 minutes but nothing. maybe ive f..ed up the zip?
didnt unzip, just opened with winrar, copypasted the inf and saved the zip.
Click to expand...
Click to collapse
this means that lineage 14.1 doesn't boot, you can reflash the 13.0 version instead. i got a new stable pacrom build that has only have the bluetooth bug, i'll post it soon.
notnoelchannel said:
this means that lineage 14.1 doesn't boot, you can reflash the 13.0 version instead. i got a new stable pacrom build that has only have the bluetooth bug, i'll post it soon.
Click to expand...
Click to collapse
thank you, will waiting for that.
btw this A1000 is such a crap phone, i cant even enter the recovery properly. it should work fine with volume up + power (until lenovo logo then release power) but sometimes it just stuck at lenovo logo. its annyoing.
edit: actually its volume down + power lol.
Related
Latest update: 2016-10-27 To view a changelog, you can visit http://www.cmxlog.com/13/quark/ for a rough idea up to the build date.
Hi all. I was able to compile this stock build of CM 13.0 thanks to the efforts/hard works of Skrilax_CZ, baybutcher27, the folks who created Resurrection Rom Remix, and those over at CyanogenMod. It takes some minor features from Resurrection Rom apparently (i.e. notification light, some tiny performance/battery tweaks, and the ability to install Motorola apps). It is otherwise stock CM 13 and I use this daily. I and the other authors/devs assume no responsibility if you damage your device somehow.
Please don't feel pressured to update any more often than you wish .
Notes:
In order to make my calling work for Verizon, I had to go under Settings->Cellular networks->Preferred network type, and select LTE/CDMA (not LTE/GSM/UMTS). I assume GSM users should be fine with the defaults.
My recommendations to install:
Install TWRP 3.0.2 if you haven't already: http://forum.xda-developers.com/mot...recovery-twrp-2-8-7-0-touch-recovery-t3180308
Perform a backup of your current system/ROM (not really needed if just flashing a newer version).
Perform a factory reset/wipe (if coming from another ROM). If not coming from another ROM, still safest to do a dalvik/art cache reset.
Install the .zip
Install the appropriate google apps (http://opengapps.org/ , ARM, 6.0). I would think nano or micro is best.
(Optional) Install a custom kernel. The best at the time of this writing are at:
http://forum.xda-developers.com/moto-maxx/development/kernel-bhb27-kernel-t3207526 (CM-NX-RR-M builds for Marshmallow)
The latest is here: https://www.androidfilehost.com/?w=files&flid=50122
Wipe dalvik/art cache if you install another kernel.
Reboot and enjoy
Kernel Adiutor is very good for performance/power saving adjustments:
https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor
If you are using bhb27 kernels, then you should use his version of Kernel Adiutor:
https://www.androidfilehost.com/?w=files&flid=48767
Here is the link to the latest ROM on the hosting website:
[2016-10-27]https://www.androidfilehost.com/?fid=457095661767104611
Previous Builds:
https://www.androidfilehost.com/?w=files&flid=52716&sort_by=date&sort_dir=DESC
I'll be back to post updates fairly regularly (~every 1-2 weeks), but I also work full time in addition to being a Dad (those of you who are know how that is ) and won't really be able to response to PMs very well. The sources I used can be found under the post on XDA here at http://forum.xda-developers.com/moto-maxx/development/rom-resurrection-remix-t3316232 (device, vendor, and kernel trees). Thanks and God bless.
I just flash this version and its absolutely amazing.
Good job devs!
Bugs I noticed:
-Settings for LED doesn't work.
-Android Auto says is not a supported device.
-Quick Charge 2.0 doesn't seems to work.
-Phone gets really hot when charging.
-...
I have been tempted to flash this all day, but I love how smooth my phone has been on resurrection remix and I enjoy the extra customizations it has. I'm eagerly awaiting the next resurrection remix build for all the latest git changes
emi.guego said:
Bugs I noticed:
-Settings for LED doesn't work.
-Android Auto says is not a supported device.
-Quick Charge 2.0 doesn't seems to work.
-Phone gets really hot when charging.
-...
Click to expand...
Click to collapse
That's a bummer with some of those bugs. Hopefully those will be taken care of soon and I'll be able to sync and rebuild. Did all of these happen to be with the stock kernel, or did you happen to flash another (like baybutchers)? I've seen a few specific to the tiles, but I dont have an Android Auto system to check against. Also, if they are working (or some) in resurrection then I could possibly try to patch this.
calsurferpunk said:
That's a bummer with some of those bugs. Hopefully those will be taken care of soon and I'll be able to sync and rebuild. Did all of these happen to be with the stock kernel, or did you happen to flash another (like baybutchers)? I've seen a few specific to the tiles, but I dont have an Android Auto system to check against. Also, if they are working (or some) in resurrection then I could possibly try to patch this.
Click to expand...
Click to collapse
I don't know exactly, I installed it by downloading the zip and gapps to my PC and used the ADB sideload, before that I was using the last nightly of CM12.1. I did that and I didn't loose my info (either way I did a TWRP backup of everything, except cache previously), so I think it was the CM kernel. When I installed for the first time CM I flashed also the zip and gapps, if that way the stock kernel is changed with the CM kernel I think I'm using CM kernel.
emi.guego said:
I don't know exactly, I installed it by downloading the zip and gapps to my PC and used the ADB sideload, before that I was using the last nightly of CM12.1. I did that and I didn't loose my info (either way I did a TWRP backup of everything, except cache previously), so I think it was the CM kernel. When I installed for the first time CM I flashed also the zip and gapps, if that way the stock kernel is changed with the CM kernel I think I'm using CM kernel.
Click to expand...
Click to collapse
Yeah that sounds like the stock cm kernel then if you didn't flash anything like that separately. I don't know if it would help, but you could always try the other kernel I posted about and see if Android Auto works (would have to restore your backup if you didn't want to keep it). It just depends how much you care and if it's worth staying with the ROM to you. There's obviously bound to be some bugs, but I enjoy using a lean version of the latest and greatest system. Thanks for the feedback .
Installed it 2h ago, everything is running fine so far.
This is smoother than the old cm and than rr too. I'm impressed!
I'm using Bhb Kernel.
My phone is turbo charging, led is working...
No bugs for me.
Nice job, mate! I'm glad we got a new cyanogenmod that we can have updates. Keep strong!
Enviado de meu Moto MAXX usando Tapatalk
thanks,
hope bat drain @ standby will be best from rom's i tested.
somebody can advice what app use to get best standby time? im using Purify but i think it doesnt help much. also on mostly rom'z even when battery mode is set to eco that doesnt help much
Maro' said:
thanks,
hope bat drain @ standby will be best from rom's i tested.
somebody can advice what app use to get best standby time? im using Purify but i think it doesnt help much. also on mostly rom'z even when battery mode is set to eco that doesnt help much
Click to expand...
Click to collapse
I've just been going under the built in privacy guard and setting advanced permissions to where apps I don't need to start at boot are denied, in addition to also denying a lot of them from being allowed to keep the device awake. I get very little battery drain in standby this way. If the cell signal is too weak though, it's really hard to prevent extra drain as it over compensates to get a good signal.
Updated ROM to CyanogenMod 13 changes as of March 24.
calsurferpunk said:
Updated ROM to changes as of March 24.
Click to expand...
Click to collapse
Changelog?
Debuffer said:
Changelog?
Click to expand...
Click to collapse
It's a little hard to say since there is a lot and I am just syncing to the main CyanogenMod 13 repository. However, this is a good link if you go by the date and something similar (such as the Nexus 6 which shares a lot of hardware).
http://www.cmxlog.com/13/shamu/
This may be a dumb question but does this have VoLTE enabled and working(Verizon user)? Since it is CyanogenMod based I assume not but just waned to ask.
calsurferpunk, can you fix wifi on XT1254 with stock Brasil 1225's 6.0.1 ROM? CM12.1 and CM13 detect Moto Maxx and Droid Turbo radio very good!
*GPS*
working for U guys? For me not (BB kernel, location: Europe)
soccertolive said:
This may be a dumb question but does this have VoLTE enabled and working(Verizon user)? Since it is CyanogenMod based I assume not but just waned to ask.
Click to expand...
Click to collapse
Your assumption is correct. I don't believe this has ever worked with CyanogenMod. I'm on Verizon and haven't seen it.
Maro' said:
*GPS*
working for U guys? For me not (BB kernel, location: Europe)
Click to expand...
Click to collapse
I had this problem on other ROMs as well until I restored the original manufacturer ROM, set GPS to device only, verified it worked, then flashed the new ROM. You might have to do the same here. I believe it's been a long ongoing bug with CyanogenMod (and probably others).
pretty thx for the cm13,did it have ambient display?
I am downloading this at work right now. It is slow and will take me a couple to download.
While it is dl'g, I have a question about wiping. Do I still need to do a factory reset if I am coming from a marshmallow cm13 RR rom?Baybutchers?
Also, I have not been able to get my GPS to work properly. In your post #17, you referred to original manufacturer rom. Where can I get this rom to set the gps? I do have computerfreek's room saved as a backup if I could use it? I don't have easy access to a computer to do a fastboot.
Thx.
Sent from my DROID Turbo using Tapatalk
Wait, ROM was updated to day 24?
By flashing a custom rom, your warranty is void 0ooh wait its void the moment you unlock bootloader.
FOLLOW INSTRUCTIONS!!! to avoid bricked devices. ask where need be!.
Not the best tab (i mean performance wise is almost pathetic), but hey!! i mean i searched for custom roms but couldnt find-the stock lagged with install of just two to three apps. Didnt like the look too. I have managed to port 2 roms for our beloved TAB.
LINKS BEFORE CREDITS!
PORTED
1= FLYME OS 6.7 based on LENOVO K4 NOTE concept
2= LINEAGE OS 7.1.1 (currently using) based on Allview V2_Viper
PREPARE TAB FOR CUSTOM ROMS
as always;
UNLOCK BOOTLOADER first (fastboot oem unlock)
FLASH TWRP by 0xAF (fastboot flash recovery ******)
***make a full backup of stock before flash
clear data/system etc before flash
then FLASH AWAY.. clear cache after. (reboot; DONE...)
As ABRHAM BEBH says; there is no ported ROM without BUGS; suprisingly i only detected a few bugs (major)
FLYME bugs..
1= NO SIM
2= CAMERA CANT CONNECT
3=NO SOUND
***these were the only bugs present after port
LINEAGE
1=SOUND WITH WHITE NOISE
2=CAMERA CANT CONNECT
3=NO IN CALL SOUND, UNLESS LOUD SPEAKER
***these were the only bugs present after port
I Manage to fix a few in both ROMS;
FLYME
1=FIXED NO SIM-working perfectly
2=FIXED NO SOUND-working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
LINEAGE
1=FIXED WHITE NOISE- sound working perfectly
****BUG REMAINING =CAMERA CANT CONNECT
=NO IN CALL SOUND, UNLESS LOUD SPEAKER- *calls unless loudspeaker
These ROMS have been ported from 6753 chipset..if that will come in handy to fix camera
i was hoping i could make this thread after i have fixed all bugs, but nahh!! i think i have tried enough and i will need help to fix remaining BUGS
******I can NO LONGER OFFER fixs..as I gave away the TAB..
***the ROMS are coming with PATCHES to fix mentioned fixed bugs..
the only payment i want is HIT the LIKE button,, come on!!:good:
LINKS
Find TWRP from 0xAF thread.. THANK him too for his recovery, thats why i havent posted the direct link to recovery https://forum.xda-developers.com/general/rooting-roms/recovery-twrp-3-0-2-lenovo-tab3-7-tb3-t3468589
My SP FLASHTOOL flashable stock 6.0 firmware https://mega.nz/#!h0cESAxY!ZOZRDxtryIB8IETJ3TTMh9_o67MucHz6GvyKxsYMbg0 (in case you mess up or want to revert to stock)
*** CERTIFICATE for USE with SP FLASHTOOL
https://forum.xda-developers.com/general/rooting-roms/sp-flashtool-authentication-file-t3613145
TWRP 3.1.1 by ME **report any bug https://mega.nz/#!RtUU3BjL!Gt2G9c7N7VLWbDjMGd9AlESJjIxa5a0_4eK9PLDADlU
ROMS uploaded
LINKS READY-
FLYME 6.0
ROM
https://mega.nz/#!I5VzyCgY!oDyo6BBp0v_sllku8tkZu6iOIxhQEXWhlIdSsmJw75I
PATCH FLYME FIX
https://mega.nz/#!lhUygbQJ!C81dWZDaal4EjucR0jw8zED4DdLWwY2LvX7lZIPpJfs
LINEAGE 14
ROM
https://mega.nz/#!J4cTiYIQ!J35IQp_KMjSUnmztZiEDnc8PVxyIpdC1HVBTJvHZFFU
LINEAGE custom boot (NEW)..!
https://mega.nz/#!JwsTmaQA!jlW7L5AGkGZ1BQ66_lH7XHEqnG3cEHQ0IiWpssgSKBU
*Flash to fix error.. give feedback if it works (no longer have the tab to test)....++this fixes boot failure
PATCH LINEAGE FIX
https://mega.nz/#!JkdVWITA!Sv7YaXaGb-JWh71j-JZFYndN_zG9cSE0fzb4Yynf1ss
...thank you
Try and give feed back..
check screenshots of LINEAGE 14 on ATTACHMENTS
CREDITS
Amit Kumar=Gionee F103pro
Iacob Ionut
0xAF
ABRHAM BEBH
Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.
Lenovo TAB3 7 TB3-730X is slow & Lagging
Sir, can you tell me that this Custom Rom Smooth and not lagging ?
Pendik85 said:
Sir, can you tell me that this Custom Rom Smooth and not lagging ?
Click to expand...
Click to collapse
Both roms are very smooth.. but have some bugs that need fixing
0xAF said:
Thank you for your effort to port the roms. I was too lazy to start something like this, but I'm glad you did it.
Thanks, I will try them soon and see if I can help with some of the bugs.
Click to expand...
Click to collapse
Sure...
dmilz said:
Sure...
Click to expand...
Click to collapse
Do you have any download links?
0xAF said:
Do you have any download links?
Click to expand...
Click to collapse
uploading right now... Will post links later
I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.
can you send the links of the ported roms?
is there a chance to work on tb3-710i ?
thx
sfvam said:
is there a chance to work on tb3-710i ?
thx
Click to expand...
Click to collapse
I doubt.. don't try unless you can escape a bootloop worse a brick
MakedoSan said:
can you send the links of the ported roms?
Click to expand...
Click to collapse
Links ready
Download and flash away
Demetris said:
I started working on Lineage porting from source on this.
Anyone able to help just pm me so i can add him/her to the project.
Click to expand...
Click to collapse
Good news ey.. probably one with no bugs will be coming about soon.
Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?
nix9756 said:
Thanks dmilz for the time develop these ROMs. But the lineageOS zip cannot be flashed, it said "ERROR: 7" (can't install this package on top of incompatible data...). Do I need to do a system wipe before flashing?
Click to expand...
Click to collapse
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage
nix9756 said:
I already do a full wipe before flashing and it seems ok with error "E: unknown command []]".
Once booted it keep booting into the custom recovery.
Click to expand...
Click to collapse
Issue noted.. download the modded boot image in op (just added) .flash it after room install.. then reboot to system..
Give me feedback after
Kellicros said:
I have the same issue, did a full wipe.
EDIT: FlymeOs works but not Lineage
Click to expand...
Click to collapse
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op
dmilz said:
Just hit the thanks button for me....
Glad you gave FLYME a try... Give LINEAGE a try with the new boot.img added in op
Click to expand...
Click to collapse
Already did, too bad you don't have the tab to work on this anymore.
Kellicros said:
Already did, too bad you don't have the tab to work on this anymore.
Click to expand...
Click to collapse
Yeah its sad..Has is worked with the new boot.img?
Disclaimer:
* You flash this ROM at your own risk and responsibility.
* This ROM is provided without ANY WARRANTY WHATSOEVER, not even the warranty that it works.
* None of the developers of this ROM will be held accountable for any damages, complaints or anything.
This rom is pre pre pre pre alpha, almost nothing is working! Just for everybody who want see Oreo look. I'm out of free time but I will update each time when I get some free time. Whats working, whats not working...etc? You tell me! You fix something, you tell me! You found something, you tell me! Adb somehow is not working, you need to change ro.build.type from userdebug to eng and adb will start working. If you have idea about whats going on with adb, you tell me! Somehow managed to boot this rom, a lot of work and time I spent to get Oreo boot, got also credentials working but somehow camera is fail to work, probably we must use Snap camera instead of the Camera2? You can try snap camera and tell me. You can try other cameras too and tell me!
Enjoy!
Source code && how to build:
https://forum.xda-developers.com/showpost.php?p=74724831&postcount=1008
Download:
https://mega.nz/#!ZB4ilbrL!nI_YV54IMBmKpA1BE4L9VYcwm3nsuLXAGKOu35NJdyQ
Can you post some screenshoots? Whats working? Whats not working? Etc? I'm so lazy
risk
while it is very risky to put this firmware.
munjeni said:
Can you post some screenshoots I'm so lazy Whats working? Whats not working? Etc?
Click to expand...
Click to collapse
Not a risky, just some more things is not working! Bugs need to be identified and fixed one by one.
Mobile data and camera are not working.
Viktor245 said:
Mobile data and camera are not working.
Click to expand...
Click to collapse
Wifi ok?
munjeni said:
Wifi ok?
Click to expand...
Click to collapse
Do not have the opportunity to check it out.
munjeni said:
Wifi ok?
Click to expand...
Click to collapse
Wifi can't be opened
Waoo, I changed my phone, now I can use my z1c to test all lol
In the afternoon I'm going to install it!
i will wait for working mobile data and wifi build
omkarmahananda said:
i will wait for working mobile data and wifi build
Click to expand...
Click to collapse
Me too I'm opened source code ppublic, everybody if free to use it and try fix something.
munjeni said:
Me too I'm opened source code ppublic, everybody if free to use it and try fix something.
Click to expand...
Click to collapse
actually i have no idea how this thing work.
but can you help learning ?!
any thread or any website or anything?
thank you
Did you have think include magisk for this version?
Sorry for being late:
Audio doesn't work
Wifi doesn't work
I'm not able to test cell data
Camera doesn't work, neither footej
ADB doesn't work, no usb at all, the device isn't listed neither with adb devices and devices control panel in windows
Bluetooth yes
Vibrating yes
@hackintosh5 here
Heyho. I just tested building from @munjeni 's sources. Unfortunately TWRP throwed an error 6. I checked the updater script and found some strange lines. With them removed I was able to install and boot
I'm really up for doing some fixes, but for me it's learning by doing which can be a time intensive process.
BTW: USB transfer works by disabling ADB in developer options... I just copied the screenshots off the device.
115ek said:
Heyho. I just tested building from @munjeni 's sources. Unfortunately TWRP throwed an error 6. I checked the updater script and found some strange lines. With them removed I was able to install and boot
I'm really up for doing some fixes, but for me it's learning by doing which can be a time intensive process.
BTW: USB transfer works by disabling ADB in developer options... I just copied the screenshots off the device.
Click to expand...
Click to collapse
But ADB works to you? Can you see the phone if you do adb devices?
@munjeni can I try to replace the libs just like as porting a custom rom from the N builds? Or it is wasted time?
-totonio- said:
But ADB works to you? Can you see the phone if you do adb devices?
Click to expand...
Click to collapse
Yes, adb works. But only if you revert this commit https://github.com/munjeni/android_device_sony_amami/commit/e0cde4386d51ad2b45d7700f495a85fdb75dc8d2.
Adb from the 8.0 tree seems to be broken, but maybe it's a problem with our devicetree.
Nevertheles, as Munjeni already did, replacing the adbd with a prebuilt one (I used one from an Android 7 tree i had lying around) works quite fine.
@munjeni : Is adb built from 8.0 source working for you? Or is it a permission problem?
Hey. I've got some news. Wifi was working for me. I just installed a new build and was able to connect
I can't test data connection - the sim reader is broken in my test device.
I think we should move ahead to lineage 15.1 (android 8.1) because support for lineage 15.0 was already dropped.
Unfortunately there are several build issues - let's see what the time brings.
*Edit: adb is fixed now
Booted 15.1 some minutes ago.
Working
adb
MTP
brightness slider
not working
wifi
automatic brightness
audio
camera
LEDs
everything else...
Was just wondering if anybody had tried this unofficial linage from erfanoabdi i found on android file host https://androidfilehost.com/?w=files&flid=248828, would like to know if its working or not before i unlock my bootloader.
Cheers Shane.
riskyfuture said:
Was just wondering if anybody had tried this unofficial linage from erfanoabdi i found on android file host https://androidfilehost.com/?w=files&flid=248828, would like to know if its working or not before i unlock my bootloader.
Cheers Shane.
Click to expand...
Click to collapse
download.invisiblek.org/roms/lineage-15.1/nash/lineage-15.1-20180411-UNOFFICIAL-nash.zip
More up to date. Follow same install instructions from AOSiP thread in ROM section.
Screenie. Works fine
Uzephi said:
download.invisiblek.org/roms/lineage-15.1/nash/lineage-15.1-20180411-UNOFFICIAL-nash.zip
More up to date. Follow same install instructions from AOSiP thread in ROM section.
Click to expand...
Click to collapse
Cheers will check I out
Any conflicts with pantheon kernel?
badhalf said:
Any conflicts with pantheon kernel?
Click to expand...
Click to collapse
Motomods currently don't work with pantheon kernel. Everything else is the sane, minus the upstream patches and the features in pantheon which work fine except 230 MHz UC of the CPU. Will work on it this weekend.
between Lineage or AOSiP, which would you recommend @Uzephi?
cervantesjc said:
between Lineage or AOSiP, which would you recommend @Uzephi?
Click to expand...
Click to collapse
That's on preference. I like the custom options of the owl's best in AOSiP personally
Uzephi said:
download.invisiblek.org/roms/lineage-15.1/nash/lineage-15.1-20180411-UNOFFICIAL-nash.zip
More up to date. Follow same install instructions from AOSiP thread in ROM section.
Click to expand...
Click to collapse
Ok so something curious happened to me, tried installing the invisiblek version of lineageOS on Twrp and now I hardbricked my cellphone. So now I just wasted $400 on a cellphone im not ever gonna use
Going to wait for a bit before I go ahead with rooting my phone as I have a Vodafone branded xt1789-06 international version. Don't want to risk bricking or loosing my IMEI as I made this mistake with my I9505. So I'm going to wait for some more development on my device.
PoisonDash2 said:
Ok so something curious happened to me, tried installing the invisiblek version of lineageOS on Twrp and now I hardbricked my cellphone. So now I just wasted $400 on a cellphone im not ever gonna use
Click to expand...
Click to collapse
Worked for me, so must have been how it was flashed. Did you flash the firmware files first for Nash? If not, you didn't flash right. A flash all fixed it for me when I forgot that.
I've been using linage for a few days now, I like how is a little more stable than AOSIP, and Moto mods work better on lineage, but I have a question, where can I see if the rom gets updated?
@Uzephi do you know if Lineage has been updated at all?
cervantesjc said:
I've been using linage for a few days now, I like how is a little more stable than AOSIP, and Moto mods work better on lineage, but I have a question, where can I see if the rom gets updated?
Click to expand...
Click to collapse
Audio work when recording video? That's really the only thing I'm waiting for on any of these ROMs before I flash. I have a motomod battery, so it's nice to know that'll work, but having audio while recording is way more important to me.
davehasninjas said:
Audio work when recording video? That's really the only thing I'm waiting for on any of these ROMs before I flash. I have a motomod battery, so it's nice to know that'll work, but having audio while recording is way more important to me.
Click to expand...
Click to collapse
That's still an issue, I really don't record that many videos, so really not an issue for me.
cervantesjc said:
@Uzephi do you know if Lineage has been updated at all?
Click to expand...
Click to collapse
Besides the normal LoS updates? None that I have seen on gerrit. You can always follow the development of LoS and our device by following their gerrit. I haven't checked it since two weeklies ago.
https://review.lineageos.org/#/q/nash
Link for our device specific additions, conflicts, abandons, etc.
Thanks for the reply, I found out that lineage takes advantage of Android seamless update, and I've been getting updates, just minor ones, but hopefully it'll be a fully working rom pretty soon.
I was using the build 20180515 from invisiblek and it was working very well. Today I installed the build 20180517 and the colours became funky and messy unfortunately, it cannot be used. I had to go back to the previous build.
Just sharing this here for you to know.
Scratch that, after a clean install it's all fine. No dirty flash from 0515 to 0517 then.
Does anyone know if lte is working on sprint?
always6s said:
Does anyone know if lte is working on sprint?
Click to expand...
Click to collapse
Yes, been working for the past couple of weeks
After days of deciding..
Yes!! i have risked my device warranty for the sake of fun and excitement. HAHA LOL
For those who asked if we can flash Treble GSI (Generic System Image) on our device. The answer is Yes, FOR ME AT LEAST!
No complicated steps or whatsoever.
I just followed the steps from this link and downloaded the GSI of my choice. CREDITS TO ALL THE DEVELOPERS WHO WORKED FOR THIS PROJECT.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
TRY THIS AT YOUR OWN RISK! I will not be held accountable to whatever happens to your device. This post is just to prove that indeed our device is treble enabled.
Some important things to note:
- You have backup of your data
- You have a working ADB
- There might be functionalities that is not working at the moment (Read the changelogs of your GSI choice before downloading)
- The notch looks bad on these builds (Android P might be able to fix this when it arrives)
- Your device should be in stock ROM (no heavy modifications such as xposed , magisk etc..) ROOT Not needed
- You should put your device on factory reset before trying this.
I have attached some screenshots of my test.
LINK TO Treble-Enabled Device Dev
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
THANK ME LATER! PEACE OUT!
good job!
Yes great job hows the camera working for you
grodri19721 said:
Yes great job hows the camera working for you
Click to expand...
Click to collapse
Lineage includes a very basic camera. just photo and video no portrait mode etc..
Lineage also has no gapps, i dont have twrp to flash gapps still figuring out how to install it.
I switched to the PixelExperience rom its great and with gapps included.
illustrasszo27 said:
Lineage includes a very basic camera. just photo and video no portrait mode etc..
Lineage also has no gapps, i dont have twrp to flash gapps still figuring out how to install it.
I switched to the PixelExperience rom its great and with gapps included.
Click to expand...
Click to collapse
android p preview 2 developer?
Everything functional?, no bugs?
el canario said:
android p preview 2 developer?
Click to expand...
Click to collapse
No. Its Android 8.1
There is no gsi for Android P yet.
DocRambone said:
Everything functional?, no bugs?
Click to expand...
Click to collapse
The only bug i have notice so far in PixelExperience is sometimes mobile data does not turned on when you toggle it in the quick tiles. you have to restart your phone then it will work after that.
illustrasszo27 said:
The only bug i have notice so far in PixelExperience is sometimes mobile data does not turned on when you toggle it in the quick tiles. you have to restart your phone then it will work after that.
Click to expand...
Click to collapse
You have the Z version with 845-chipset?
DocRambone said:
You have the Z version with 845-chipset?
Click to expand...
Click to collapse
No this is the lower version. with snapdragon 636
im still waiting on android P rom XD
Is the status bar at the top still messed up on the pixel experience ROM?
hands0m3 said:
Is the status bar at the top still messed up on the pixel experience ROM?
Click to expand...
Click to collapse
Yes. same as with lineage. for me its tolerable since no information is being shown at that part of the status bar.
Do you think changing the dpi would help with that
hands0m3 said:
Do you think changing the dpi would help with that
Click to expand...
Click to collapse
I'm not sure bro. One thing i tried is changing the display size in settings. It looks better but everything looks so big. so i reverted to the default one.
Sir could you possibly upload the stock recovery.img of our device.? im stuck on TWRP and i cant flash regular OTA update from there
jrd1990 said:
Sir could you possibly upload the stock recovery.img of our device.? im stuck on TWRP and i cant flash regular OTA update from there
Click to expand...
Click to collapse
What ROM are you using right now? i think you can extract it from the image of that ROM. sorry if this not as helpful.
he is on Stock Rom and he would like one guy put the stock recovery.img here
Excellent job. Thank you. I understand the camera is basic, but how is image quality? Looking forward to Google Camera port tests. And perhaps the ZE620KL fully ported so can make use of the landscape camera. Not a huge deal, but would be nice, no?
As visible on screenshot, Asus Camera is properly visible in the launcher (because of being put to vendor by Asus), but does it run well?